All MIBs › NBS-EUSM-MIB
Organization: MRV
Last Updated: 2007-10-10
Category: MRV In-Reach Console / Terminal Server, Management & Admin Interfaces
Description: Manages MRV NBS enhanced user-space module configuration and operational state.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is NBS-EUSM-MIB?
NBS-EUSM-MIB is an MRV Communications proprietary SNMP module (under the nbs enterprise branch used by MRV's NBS product line) managing the Enhanced User-Space Module (EUSM), a per-slot feature set on MRV chassis-based switching equipment. It exposes per-slot objects covering access-control tagging behavior, VLAN ID list assignment, link aggregation administrative/operational state, and storm-control thresholds for broadcast, multicast, and unicast traffic. As a configuration-and-operational-state MIB, it is used to monitor whether individual chassis slots support the EUSM feature, whether link aggregation is administratively configured versus actually operational on that slot, and whether storm-control burst-size thresholds are properly guarding against traffic floods. It is MRV/NBS proprietary and does not appear to build on any shared IETF MIB, relying instead on MRV's own chassis slot-indexing conventions. It is typically deployed on MRV NBS modular Ethernet switch/media-converter chassis in metro or enterprise access network deployments, where administrators can get the NBS-EUSM-MIB download to load into their SNMP management tools.
IPNetwork Monitor allows you to monitor SNMP objects defined in NBS-EUSM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- MRV Communications NBS modular Ethernet switches/media-converter chassis
Monitoring Examples
An administrator would poll nbsEusmSlotTable keyed by slot to check nbsEusmSlotSupportsEusm and confirm nbsEusmSlotLinkAggrAdmin against nbsEusmSlotLinkAggrOper to catch a slot where link aggregation was configured but never came operationally up. Reviewing nbsEusmSlotStormControlBroadcast, nbsEusmSlotStormControlMulticast, and nbsEusmSlotStormControlUnicast alongside nbsEusmSlotStormBurstSize would reveal whether storm-control thresholds are set appropriately or whether a slot is passing an abnormal burst of traffic. Access-control objects like nbsEusmSlotAccControlActionTag/Untag and nbsEusmSlotAccControlVidList would show which VLANs are tagged versus untagged for that slot's access control policy.
What Can Be Monitored
- per-slot EUSM feature support
- link aggregation admin vs. operational state
- storm-control thresholds (broadcast/multicast/unicast)
- storm-control burst size
- access-control VLAN tagging configuration
This MIB depends on
Related MIBs
Imported Objects
From NBS-CMMC-MIB
| nbs | OBJECT-IDENTITY |
| nbsCmmcPortEntry | OBJECT-TYPE |
| nbsCmmcSlotEntry | OBJECT-TYPE |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString | |
| RowStatus | |
| StorageType |
How to Use in IPNetwork Monitor
Example using nbsEusmPmAvgAllSizes OID:
Select an MRV Communications NBS modular Ethernet switch/media-converter chassis (EUSM) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type nbsEusmPmAvgAllSizes into the Find box to locate it in the OID tree, then select it and click OK. The average transit time (nanosec) for monitored frames. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| nbsEusmMib | 1.3.6.1.4.1.629.202 | MIB for representing MRV Eusm information | ||
| nbsEusmSlotGrp | 1.3.6.1.4.1.629.202.1 | Stage-II Slot context features for EUSM boards | ||
| nbsEusmSlotTable | 1.3.6.1.4.1.629.202.1.1 | not-accessible | Contains a description of slot context features applicable for the whole module. There is going to be one row for each slot. All the scalar type objects applicable at the slot context are dumped here. | |
| nbsEusmSlotEntry | 1.3.6.1.4.1.629.202.1.1.1 | not-accessible | Contains a description of slot context features applicable for the whole module. There is going to be one row for each slot. All the scalar type objects applicable at the slot context are dumped here. | |
| INT nbsEusmSlotSupportsEusm | 1.3.6.1.4.1.629.202.1.1.1.1 | INTEGER | read-only | Is EUSM config and status supported for this slot? |
| INT nbsEusmSlotAccControlActionUntag | 1.3.6.1.4.1.629.202.1.1.1.2 | INTEGER | read-write | permit(2) or deny(3) works on all untagged frames |
| INT nbsEusmSlotAccControlActionTag | 1.3.6.1.4.1.629.202.1.1.1.3 | INTEGER | read-write | denyAll(2) filters all tagged frames denyVlan(3) and permitVlan(4) work on the specified list permitAll(5) negates access control of tagged frames |
| STR nbsEusmSlotAccControlVidList | 1.3.6.1.4.1.629.202.1.1.1.4 | DisplayString | read-write | List of VLAN in a free format, for example 10-12 15 23-43 1000-1050 specifies 3 different ranges of vlan ids and one isolated vlan id |
| INT nbsEusmSlotLinkAggrAdmin | 1.3.6.1.4.1.629.202.1.1.1.5 | INTEGER | read-write | Depending on the link status of the trunk ports the Link Aggregation operational status may be different, this is why it calls for both Admin and Oper objects |
| INT nbsEusmSlotLinkAggrOper | 1.3.6.1.4.1.629.202.1.1.1.6 | INTEGER | read-only | |
| INT nbsEusmSlotStormControlBroadcast | 1.3.6.1.4.1.629.202.1.1.1.7 | INTEGER | read-write | Units is in terms of 991 bytes , or approx 1k |
| INT nbsEusmSlotStormControlMulticast | 1.3.6.1.4.1.629.202.1.1.1.8 | INTEGER | read-write | Units is in terms of 991 bytes , or approx 1k |
| INT nbsEusmSlotStormControlUnicast | 1.3.6.1.4.1.629.202.1.1.1.9 | INTEGER | read-write | Units is in terms of 991 bytes , or approx 1k |
| INT nbsEusmSlotStormBurstSize | 1.3.6.1.4.1.629.202.1.1.1.10 | INTEGER | read-write | **** DEPRECATED **** |
| INT nbsEusmSlotCoSMode | 1.3.6.1.4.1.629.202.1.1.1.11 | INTEGER | read-write | If the user selects bothTagDscp(4), and a packet arrives with both DSCP and a Vlan tag, the DSCP priority system will take precedence. tagOnly(3) will use Layer 2 Vlan Priority bits to assign a Service Level Class (SLC) to a packet and tagMappingTable information will be used. dscpOnly(2) will use Layer 3 DSCP bits to assign an SL class to a packet. dscpMappingTable information will be used |
| INT nbsEusmSlotDscpRemark | 1.3.6.1.4.1.629.202.1.1.1.12 | INTEGER | read-write | The EUSM can be set to mark egress packets with a new DSCP. The user can set to remark egress DSCP in one of the following modes: AF or CS Remarking only applies to IPv4 or IPv6 packets. The user can define which type of incoming (ingress )DSCP frames will be remarked.Selection includes the combination of EF,AF,CS,Zero DSCP and all others. |
| INT nbsEusmSlotDscpEgressMode | 1.3.6.1.4.1.629.202.1.1.1.13 | INTEGER | read-write | The user can set to egress remark DSCP in one of the following modes: a) Map CoS class to AF CPs (call it AF-mode) 0: AF12 1: AF22 2: AF32 3: AF42 b) Map CoS class to Class selectors CPs (call it CS-mode) 0: 000000 1: 001000 2: 010000 3: 110000 |
| INT nbsEusmSlotDscpIngressEf | 1.3.6.1.4.1.629.202.1.1.1.14 | INTEGER | read-write | One of the five ingress options EF,AF,CS,ZERO and OTHER |
| INT nbsEusmSlotDscpIngressAf | 1.3.6.1.4.1.629.202.1.1.1.15 | INTEGER | read-write | One of the five ingress options EF,AF,CS,ZERO and OTHER |
| INT nbsEusmSlotDscpIngressCs | 1.3.6.1.4.1.629.202.1.1.1.16 | INTEGER | read-write | One of the five ingress options EF,AF,CS,ZERO and OTHER |
| INT nbsEusmSlotDscpIngressZeroDscp | 1.3.6.1.4.1.629.202.1.1.1.17 | INTEGER | read-write | One of the five ingress options EF,AF,CS,ZERO and OTHER |
| INT nbsEusmSlotDscpIngressAllOther | 1.3.6.1.4.1.629.202.1.1.1.18 | INTEGER | read-write | One of the five ingress options EF,AF,CS,ZERO and OTHER |
| INT nbsEusmSlotIometrix | 1.3.6.1.4.1.629.202.1.1.1.19 | INTEGER | read-write | Controls whether or not the EUSM should enable Iometrix Level 1 cNode agent behavior |
| INT nbsEusmSlotManagementVid | 1.3.6.1.4.1.629.202.1.1.1.20 | INTEGER | read-write | VLAN Id reserved for EUSM management activities. |
| U32 nbsEusmSlotUserPortIRAdmin | 1.3.6.1.4.1.629.202.1.1.1.21 | Unsigned32 | read-write | Unit is kilobits per second. This applies to all frames incoming on the user port. The actual granularity is a function of line rate: roughly 61 Kbps for 1000 Mbps, 6.1 Kbps for 100 Mbps, and 0.61 Kbps for 10 Mbps |
| U32 nbsEusmSlotUserPortIROper | 1.3.6.1.4.1.629.202.1.1.1.22 | Unsigned32 | read-only | Unit is kilobits per second. This applies to all frames incoming on the user port. The actual granularity is a function of line rate: roughly 61 Kbps for 1000 Mbps, 6.1 Kbps for 100 Mbps, and 0.61 Kbps for 10 Mbps. It is based on the configured IRAdmin object modified to match the constraints of the device. |
| INT nbsEusmSlotMaxFlowCfgSize | 1.3.6.1.4.1.629.202.1.1.1.23 | INTEGER | read-only | Maximum number of entries in the FlowCfg table. This may vary from slot to slot if different versions of EUSM software support different table sizes. |
| INT nbsEusmSlotMaxVlanTranSize | 1.3.6.1.4.1.629.202.1.1.1.24 | INTEGER | read-only | Maximum number of entries in the VLAN Translation table. This may vary from slot to slot if different versions of EUSM software support different table sizes. |
| INT nbsEusmSlotMaxDscpMapSize | 1.3.6.1.4.1.629.202.1.1.1.25 | INTEGER | read-only | Maximum number of entries in the DSCP to SLC Priority Map table. This may vary from slot to slot if different versions of EUSM software support different table sizes. |
| INT nbsEusmSlotMaxCosPrioSize | 1.3.6.1.4.1.629.202.1.1.1.26 | INTEGER | read-only | Maximum number of entries in the VLAN CoS to SLC Priority table. This may vary from slot to slot if different versions of EUSM software support different table sizes. |
| nbsEusmFlowCfgTable | 1.3.6.1.4.1.629.202.1.2 | not-accessible | A table that describes the Vlan Flow Rate Limits At the moment there is a limit of 32 entries for this table | |
| nbsEusmFlowCfgEntry | 1.3.6.1.4.1.629.202.1.2.1 | not-accessible | Contains a description of a particular Vlan Flow Rate Limit information | |
| INT nbsEusmFlowCfgChassis | 1.3.6.1.4.1.629.202.1.2.1.1 | INTEGER | read-only | The index of the table to refer to Chassis |
| INT nbsEusmFlowCfgSlot | 1.3.6.1.4.1.629.202.1.2.1.2 | INTEGER | read-only | The index of the table to refer to Slot of this EUSM |
| INT nbsEusmFlowCfgVid | 1.3.6.1.4.1.629.202.1.2.1.3 | INTEGER | read-only | The Vid part of the index. |
| INT nbsEusmFlowCfgPriority | 1.3.6.1.4.1.629.202.1.2.1.4 | INTEGER | read-only | Priority part of the VLAN as index. 0(Zero) is don't care and the real priority starts 1 based. |
| ROW nbsEusmFlowCfgRowStatus | 1.3.6.1.4.1.629.202.1.2.1.5 | RowStatus | read-create | This table RowStatus object to create, modify and delete the rows |
| STO nbsEusmFlowCfgStorageType | 1.3.6.1.4.1.629.202.1.2.1.6 | StorageType | read-create | This table StorageType |
| U32 nbsEusmFlowCfgIRAdmin | 1.3.6.1.4.1.629.202.1.2.1.7 | Unsigned32 | read-create | Information Rate (IR) specified for the Vid and priority combo. Unit is kilobits per second. Max possible value is 4,294,967,295 which is large enough even to represent 1 Terabit communication. |
| U32 nbsEusmFlowCfgIROper | 1.3.6.1.4.1.629.202.1.2.1.8 | Unsigned32 | read-only | Information Rate (IR) that is actually applied to the flow. Unit is kilobits per second. Max possible value is 4,294,967,295 which is large enough even to represent 1 Terabit communication. |
| INT nbsEusmFlowCfgClearCounter | 1.3.6.1.4.1.629.202.1.2.1.9 | INTEGER | read-create | To clear the counters for selected row |
| nbsEusmFlowStatusTable | 1.3.6.1.4.1.629.202.1.3 | not-accessible | A table that describes the Vlan Flow Rate Limits At the moment there is a limit of 32 entries for this table. | |
| nbsEusmFlowStatusEntry | 1.3.6.1.4.1.629.202.1.3.1 | not-accessible | Contains status part of the FlowCfgTable | |
| C64 nbsEusmFlowStatusRxFrames | 1.3.6.1.4.1.629.202.1.3.1.1 | Counter64 | read-only | Received Frames counted |
| C64 nbsEusmFlowStatusRxOctets | 1.3.6.1.4.1.629.202.1.3.1.2 | Counter64 | read-only | Received Octets counted |
| nbsEusmVidMapTable | 1.3.6.1.4.1.629.202.1.4 | not-accessible | A table that describes the Vlan Translation table At the moment there is a limit of 3 or 7 entries for this table | |
| nbsEusmVidMapEntry | 1.3.6.1.4.1.629.202.1.4.1 | not-accessible | Contains a description of a particular Vlan Translation table feature | |
| INT nbsEusmVidMapChassis | 1.3.6.1.4.1.629.202.1.4.1.1 | INTEGER | read-only | The index of the table to refer to Chassis |
| INT nbsEusmVidMapSlot | 1.3.6.1.4.1.629.202.1.4.1.2 | INTEGER | read-only | The index of the table to refer to Slot of this EUSM |
| INT nbsEusmVidMapFromVid | 1.3.6.1.4.1.629.202.1.4.1.3 | INTEGER | read-only | The vlanTranslation index. |
| INT nbsEusmVidMapToVid | 1.3.6.1.4.1.629.202.1.4.1.4 | INTEGER | read-create | The vlanTranslation index. |
| ROW nbsEusmVidMapRowStatus | 1.3.6.1.4.1.629.202.1.4.1.5 | RowStatus | read-create | This table RowStatus object to create, modify and delete the rows |
| STO nbsEusmVidMapStorageType | 1.3.6.1.4.1.629.202.1.4.1.6 | StorageType | read-create | This table StorageType |
| nbsEusmCoSDscpMapTable | 1.3.6.1.4.1.629.202.1.5 | not-accessible | Only 7 possible rows in this table.It is possible to make this table without the RowStatus object as there are not going to be variable number of rows in this table. But we could define less than 7 rows. So RowStatus is added on | |
| nbsEusmCoSDscpMapEntry | 1.3.6.1.4.1.629.202.1.5.1 | not-accessible | Ingress Tag prio is mapped to egress SL class queue or priority | |
| INT nbsEusmCoSDscpMapChassis | 1.3.6.1.4.1.629.202.1.5.1.1 | INTEGER | read-only | The index of the table to refer to Chassis |
| INT nbsEusmCoSDscpMapSlot | 1.3.6.1.4.1.629.202.1.5.1.2 | INTEGER | read-only | The index of the table to refer to Slot of this EUSM |
| INT nbsEusmCoSDscpMapDscp | 1.3.6.1.4.1.629.202.1.5.1.3 | INTEGER | read-only | DSCP range is 0..63 and since it is an index we make it 1..64 as the 1 based range |
| INT nbsEusmCoSDscpMapSlcPrio | 1.3.6.1.4.1.629.202.1.5.1.4 | INTEGER | read-create | Service Level Class Priority has 4 queues. Each ingress packet is assigned a Diffserv Service Level Class as part of the ingress traffic process. A packet can be forwarded to any one of 4 hardware egress packet queues of a port according to the packet SL class. |
| ROW nbsEusmCoSDscpMapRowStatus | 1.3.6.1.4.1.629.202.1.5.1.5 | RowStatus | read-create | This table RowStatus object to create, modify and delete the rows |
| STO nbsEusmCoSDscpMapStorageType | 1.3.6.1.4.1.629.202.1.5.1.6 | StorageType | read-create | This table StorageType |
| nbsEusmCoSTagPrioMapTable | 1.3.6.1.4.1.629.202.1.6 | not-accessible | Only 8 rows in this table. It is a fixed size table because rows for all values of the table index Priority object must be defined in the configured device. | |
| nbsEusmCoSTagPrioMapEntry | 1.3.6.1.4.1.629.202.1.6.1 | not-accessible | Ingress Tag priority is mapped to egress Service Level class queue or priority. | |
| INT nbsEusmCoSTagPrioMapChassis | 1.3.6.1.4.1.629.202.1.6.1.1 | INTEGER | read-only | The index of the table to refer to Chassis |
| INT nbsEusmCoSTagPrioMapSlot | 1.3.6.1.4.1.629.202.1.6.1.2 | INTEGER | read-only | The index of the table to refer to Slot of this EUSM |
| INT nbsEusmCoSTagPrioMapPriority | 1.3.6.1.4.1.629.202.1.6.1.3 | INTEGER | read-only | Tag priority range is 0..7. |
| INT nbsEusmCoSTagPrioMapSlcPrio | 1.3.6.1.4.1.629.202.1.6.1.4 | INTEGER | read-create | Service Level Class Priority has 4 queues. Each ingress packet is assigned a Diffserv Service Level Class as part of the ingress traffic process. A packet can be forwarded to any one of 4 hardware egress packet queues of a port according to the packet SL class. |
| nbsEusmPortGrp | 1.3.6.1.4.1.629.202.2 | Stage-II Port context featurea for EUSM boards | ||
| nbsEusmPortTable | 1.3.6.1.4.1.629.202.2.1 | not-accessible | Contains a description of Port context features applicable There is going to be one row for each port. All the scalar type objects applicable at the port context are dumped here. | |
| nbsEusmPortEntry | 1.3.6.1.4.1.629.202.2.1.1 | not-accessible | Contains a description of slot context features applicable for the whole module. There is going to be one row for each slot. All the scalar type objects applicable at the slot context are dumped here. | |
| INT nbsEusmPortSupportsEusm | 1.3.6.1.4.1.629.202.2.1.1.1 | INTEGER | read-only | Is EUSM config and status supported for this slot? |
| INT nbsEusmPortSmartLoopbackAction | 1.3.6.1.4.1.629.202.2.1.1.2 | INTEGER | read-write | |
| INT nbsEusmPortSmartLoopbackSwap | 1.3.6.1.4.1.629.202.2.1.1.3 | INTEGER | read-write | |
| OCT nbsEusmPortSmartLoopbackMac | 1.3.6.1.4.1.629.202.2.1.1.4 | OCTET STRING | read-write | |
| INT nbsEusmPortSmartLoopbackVid | 1.3.6.1.4.1.629.202.2.1.1.5 | INTEGER | read-write | |
| INT nbsEusmPortVlanTagAction | 1.3.6.1.4.1.629.202.2.1.1.6 | INTEGER | read-write | add(2) need two more arguments s-vlanId and s-vlan-priority strip(3)and ignore(4) does not need any argument |
| INT nbsEusmPortVlanTagVid | 1.3.6.1.4.1.629.202.2.1.1.7 | INTEGER | read-write | need to be specified when VlanTagAction is add(2) |
| INT nbsEusmPortVlanTagPriority | 1.3.6.1.4.1.629.202.2.1.1.8 | INTEGER | read-write | need to be specified when VlanTagAction is add(2) |
| nbsEusmTestGrp | 1.3.6.1.4.1.629.202.3 | Testing category of features for EUSM boards. The example items that may go here are the smart loopback traffic generation, loss/gain analysis, performance monitoring, etc. | ||
| nbsEusmTgaTable | 1.3.6.1.4.1.629.202.3.1 | not-accessible | Contains a description of Test context features applicable. There is going to be one row for each port. | |
| nbsEusmTgaEntry | 1.3.6.1.4.1.629.202.3.1.1 | not-accessible | Contains a description of slot context features applicable for the whole module. There is going to be one row for each port. | |
| OCT nbsEusmTgaDa | 1.3.6.1.4.1.629.202.3.1.1.1 | OCTET STRING | read-write | Destination Address - MAC address |
| INT nbsEusmTgaDaType | 1.3.6.1.4.1.629.202.3.1.1.2 | INTEGER | read-write | Different options to specify the Destination Address |
| OCT nbsEusmTgaSa | 1.3.6.1.4.1.629.202.3.1.1.3 | OCTET STRING | read-write | Source Address - MAC address |
| INT nbsEusmTgaSaType | 1.3.6.1.4.1.629.202.3.1.1.4 | INTEGER | read-write | Different options to specify the Source Address |
| OCT nbsEusmTgaTag | 1.3.6.1.4.1.629.202.3.1.1.5 | OCTET STRING | read-write | VLAN tag or e-type plus initial data If VLAN tagging is not specified (i.e. Tag does not begin as 81-00), then the first two bytes of Tag define the frame type, and the last two Tag bytes are the first two data bytes |
| INT nbsEusmTgaTagType | 1.3.6.1.4.1.629.202.3.1.1.6 | INTEGER | read-write | Different options to specify the Tag |
| OCT nbsEusmTgaPattern | 1.3.6.1.4.1.629.202.3.1.1.7 | OCTET STRING | read-write | The two Pattern bytes are replicated as needed to fill-out the frame to the specified size |
| INT nbsEusmTgaPatternType | 1.3.6.1.4.1.629.202.3.1.1.8 | INTEGER | read-write | Different options to specify the Source Address |
| INT nbsEusmTgaFrameSize | 1.3.6.1.4.1.629.202.3.1.1.9 | INTEGER | read-write | Frame Size range from 64 to 9600 |
| INT nbsEusmTgaFrameSizeType | 1.3.6.1.4.1.629.202.3.1.1.10 | INTEGER | read-write | Different options to specify the Frame Size |
| U32 nbsEusmTgaFrameCount | 1.3.6.1.4.1.629.202.3.1.1.11 | Unsigned32 | read-write | |
| INT nbsEusmTgaFrameCountType | 1.3.6.1.4.1.629.202.3.1.1.12 | INTEGER | read-write | Different options to specify the Frame Size |
| INT nbsEusmTgaInterPacketGap | 1.3.6.1.4.1.629.202.3.1.1.13 | INTEGER | read-write | Rate Control - only option is fixed. Default is 1249928. This sets an approx rate of 100/10/1 fps at 1000/100/10 Mbps. Number of bytes between frames. Controls traffic rate |
| INT nbsEusmTgaAction | 1.3.6.1.4.1.629.202.3.1.1.14 | INTEGER | read-write | Different actions to activate the traffic generation. There are three frame generation activities: specify, start, and stop. Specifying and actually starting traffic may be done together or separately. In fact, it is reasonable to specify once, then start (and stop) many times. |
| nbsEusmCableTestTable | 1.3.6.1.4.1.629.202.3.2 | not-accessible | Cable testing feature | |
| nbsEusmCableTestEntry | 1.3.6.1.4.1.629.202.3.2.1 | not-accessible | Cable testing feature | |
| INT nbsEusmCableTestStatus | 1.3.6.1.4.1.629.202.3.2.1.1 | INTEGER | read-write | To initiate and get the status of the cable test feature. It is applicable only to copper ports. In the future we may have multiple copper ports. A GET on this object will show testIdle if a test has never been run, or testCompleted(4) if it has. When testStart(2) is SET, for a short time of about 3 seconds you would expect to see testInProgress(3). Time-stamp of the test start will be sent by the SNMP agent to the line-card to keep track of the time instance of the test. |
| STR nbsEusmCableTestResult | 1.3.6.1.4.1.629.202.3.2.1.2 | DisplayString | read-only | This string will give out the result of the cable test done with a time stamp that gives the indication as to when the CableTest was initiated. This also gives the result for all the 4 pairs of wire. Possible results status includes invalid, good, mismatch short and open. When the status is mismatch, short or open, there will be length indicating more information about the location of the fault. From the LNXNM point of view it is easy to deal with scalars than tables - so this is made into DisplayString. Since the MVs use it read-only and display anyway, it is probably simpler to deal with scalar display string rather than table. An example TestResult may look like the following pair-1 good,pair-2 invalid,pair-3 open at 25 meters,pair-4 good. |
| nbsEusmLgaTable | 1.3.6.1.4.1.629.202.3.3 | not-accessible | Contains a description of Traffic discrepancy counters. | |
| nbsEusmLgaEntry | 1.3.6.1.4.1.629.202.3.3.1 | not-accessible | Discrepancy entry | |
| I32 nbsEusmLgaRdAllFrames | 1.3.6.1.4.1.629.202.3.3.1.1 | Integer32 | read-only | The count of all frames (good+bad) lost/gained (-/+) in the most recent interval. Not supported value: 0x80000000 |
| I32 nbsEusmLgaRducFrames | 1.3.6.1.4.1.629.202.3.3.1.2 | Integer32 | read-only | The count of good unicast frames lost/gained (-/+) in the most recent interval. Not supported value: 0x80000000 |
| I32 nbsEusmLgaRdmcFrames | 1.3.6.1.4.1.629.202.3.3.1.3 | Integer32 | read-only | The count of good multicast frames lost/gained (-/+) in the most recent interval. Not supported value: 0x80000000 |
| I32 nbsEusmLgaRdbcFrames | 1.3.6.1.4.1.629.202.3.3.1.4 | Integer32 | read-only | The count of good broadcast frames lost/gained (-/+) in the most recent interval. Not supported value: 0x80000000 |
| I32 nbsEusmLgaRdSize64 | 1.3.6.1.4.1.629.202.3.3.1.5 | Integer32 | read-only | The count of all 64 byte frames lost/gained (-/+) in the most recent interval. Not supported value: 0x80000000 |
| I32 nbsEusmLgaRdSizeMax127 | 1.3.6.1.4.1.629.202.3.3.1.6 | Integer32 | read-only | The count of all 65-127 byte frames lost/gained (-/+) in the most recent interval. Not supported value: 0x80000000 |
| I32 nbsEusmLgaRdSizeMax255 | 1.3.6.1.4.1.629.202.3.3.1.7 | Integer32 | read-only | The count of all 128-255 byte frames lost/gained (-/+) in the most recent interval. Not supported value: 0x80000000 |
| I32 nbsEusmLgaRdSizeMax511 | 1.3.6.1.4.1.629.202.3.3.1.8 | Integer32 | read-only | The count of all 256-511 byte frames lost/gained (-/+) in the most recent interval. Not supported value: 0x80000000 |
| I32 nbsEusmLgaRdSizeMax1023 | 1.3.6.1.4.1.629.202.3.3.1.9 | Integer32 | read-only | The count of all 512-1023 byte frames lost/gained (-/+) in the most recent interval. Not supported value: 0x80000000 |
| I32 nbsEusmLgaRdSizeMax1518 | 1.3.6.1.4.1.629.202.3.3.1.10 | Integer32 | read-only | The count of all 1024-1518 byte frames lost/gained (-/+) in the most recent interval. Not supported value: 0x80000000 |
| I32 nbsEusmLgaRdSizeMax2047 | 1.3.6.1.4.1.629.202.3.3.1.11 | Integer32 | read-only | The count of all 1519-2047 byte frames lost/gained (-/+) in the most recent interval. Not supported value: 0x80000000 |
| I32 nbsEusmLgaRdSizeOvr2047 | 1.3.6.1.4.1.629.202.3.3.1.12 | Integer32 | read-only | The count of all 2048-plus byte frames lost/gained (-/+) in the most recent interval. Not supported value: 0x80000000 |
| U32 nbsEusmLgaRdFrameDivisor | 1.3.6.1.4.1.629.202.3.3.1.13 | Unsigned32 | read-only | The divisor to calculate frame loss/gain ratios for the most recent interval. |
| I32 nbsEusmLgaRdAllOctets | 1.3.6.1.4.1.629.202.3.3.1.14 | Integer32 | read-only | The count of all frame octets lost/gained (-/+) in the most recent interval. Not supported value: 0x80000000 |
| U32 nbsEusmLgaRdOctetDivisor | 1.3.6.1.4.1.629.202.3.3.1.15 | Unsigned32 | read-only | The divisor to calculate octet loss/gain ratios for the most recent interval. |
| U32 nbsEusmLgaRdTimeSpan | 1.3.6.1.4.1.629.202.3.3.1.16 | Unsigned32 | read-only | The time span (tenths of a sec) for the most recent interval. |
| I32 nbsEusmLgaAdAllFrames | 1.3.6.1.4.1.629.202.3.3.1.17 | Integer32 | read-only | The accumulated count of all frames (good+bad) lost/gained (-/+) over all intervals. Not supported value: 0x80000000 |
| I32 nbsEusmLgaAducFrames | 1.3.6.1.4.1.629.202.3.3.1.18 | Integer32 | read-only | The accumulated count of good unicast frames lost/gained (-/+) over all intervals. Not supported value: 0x80000000 |
| I32 nbsEusmLgaAdmcFrames | 1.3.6.1.4.1.629.202.3.3.1.19 | Integer32 | read-only | The accumulated count of good multicast frames lost/gained (-/+) over all intervals. Not supported value: 0x80000000 |
| I32 nbsEusmLgaAdbcFrames | 1.3.6.1.4.1.629.202.3.3.1.20 | Integer32 | read-only | The accumulated count of good broadcast frames lost/gained (-/+) over all intervals. Not supported value: 0x80000000 |
| I32 nbsEusmLgaAdSize64 | 1.3.6.1.4.1.629.202.3.3.1.21 | Integer32 | read-only | The accumulated count of all 64 byte frames lost/gained (-/+) over all intervals. Not supported value: 0x80000000 |
| I32 nbsEusmLgaAdSizeMax127 | 1.3.6.1.4.1.629.202.3.3.1.22 | Integer32 | read-only | The accumulated count of all 65-127 byte frames lost/gained (-/+) over all intervals. Not supported value: 0x80000000 |
| I32 nbsEusmLgaAdSizeMax255 | 1.3.6.1.4.1.629.202.3.3.1.23 | Integer32 | read-only | The accumulated count of all 128-255 byte frames lost/gained (-/+) over all intervals. Not supported value: 0x80000000 |
| I32 nbsEusmLgaAdSizeMax511 | 1.3.6.1.4.1.629.202.3.3.1.24 | Integer32 | read-only | The accumulated count of all 256-511 byte frames lost/gained (-/+) over all intervals. Not supported value: 0x80000000 |
| I32 nbsEusmLgaAdSizeMax1023 | 1.3.6.1.4.1.629.202.3.3.1.25 | Integer32 | read-only | The accumulated count of all 512-1023 byte frames lost/gained (-/+) over all intervals. Not supported value: 0x80000000 |
| I32 nbsEusmLgaAdSizeMax1518 | 1.3.6.1.4.1.629.202.3.3.1.26 | Integer32 | read-only | The accumulated count of all 1024-1518 byte frames lost/gained (-/+) over all intervals. Not supported value: 0x80000000 |
| I32 nbsEusmLgaAdSizeMax2047 | 1.3.6.1.4.1.629.202.3.3.1.27 | Integer32 | read-only | The accumulated count of all 1519-2047 byte frames lost/gained (-/+) over all intervals. Not supported value: 0x80000000 |
| I32 nbsEusmLgaAdSizeOvr2047 | 1.3.6.1.4.1.629.202.3.3.1.28 | Integer32 | read-only | The accumulated count of all 2048-plus byte frames lost/gained (-/+) over all intervals. Not supported value: 0x80000000 |
| U32 nbsEusmLgaAdFrameDivisor | 1.3.6.1.4.1.629.202.3.3.1.29 | Unsigned32 | read-only | The divisor to calculate frame loss/gain ratios over all intervals. |
| I32 nbsEusmLgaAdAllOctets | 1.3.6.1.4.1.629.202.3.3.1.30 | Integer32 | read-only | The accumulated count of all frame octets lost/gained (-/+) over all intervals. Not supported value: 0x80000000 |
| U32 nbsEusmLgaAdOctetDivisor | 1.3.6.1.4.1.629.202.3.3.1.31 | Unsigned32 | read-only | The divisor to calculate octet loss/gain ratios over all intervals. |
| U32 nbsEusmLgaAdTimeSpan | 1.3.6.1.4.1.629.202.3.3.1.32 | Unsigned32 | read-only | The accumulated time span (tenths of a sec) for all intervals. |
| INT nbsEusmSlotLgaInterval | 1.3.6.1.4.1.629.202.3.3.1.33 | INTEGER | read-write | Traffic Analysis (loss/gain) sampling time interval (sec). Practical range allowed is 10 seconds to 1 day. |
| INT nbsEusmSlotLgaAction | 1.3.6.1.4.1.629.202.3.3.1.34 | INTEGER | read-write | Traffic Analysis (loss/gain) activity status. |
| nbsEusmPmTable | 1.3.6.1.4.1.629.202.3.4 | not-accessible | Contains a description of Traffic discrepancy counters. | |
| nbsEusmPmEntry | 1.3.6.1.4.1.629.202.3.4.1 | not-accessible | Performance Monitoring entry | |
| C32 nbsEusmPmAvgAllSizesEx | 1.3.6.1.4.1.629.202.3.4.1.1 | Counter32 | read-only | The average transit time (nanosec) for monitored frames. |
| C32 nbsEusmPmAvg64 | 1.3.6.1.4.1.629.202.3.4.1.2 | Counter32 | read-only | The average transit time (nanosec) for monitored 64 byte frames. |
| C32 nbsEusmPmAvg127 | 1.3.6.1.4.1.629.202.3.4.1.3 | Counter32 | read-only | The average transit time (nanosec) for monitored 65-127 byte frames. |
| C32 nbsEusmPmAvg255 | 1.3.6.1.4.1.629.202.3.4.1.4 | Counter32 | read-only | The average transit time (nanosec) for monitored 128-255 byte frames. |
| C32 nbsEusmPmAvg511 | 1.3.6.1.4.1.629.202.3.4.1.5 | Counter32 | read-only | The average transit time (nanosec) for monitored 256-511 byte frames. |
| C32 nbsEusmPmAvg1023 | 1.3.6.1.4.1.629.202.3.4.1.6 | Counter32 | read-only | The average transit time (nanosec) for monitored 512-1023 byte frames. |
| C32 nbsEusmPmAvg1518 | 1.3.6.1.4.1.629.202.3.4.1.7 | Counter32 | read-only | The average transit time (nanosec) for monitored 1024-1518 byte frames. |
| C32 nbsEusmPmAvg2047 | 1.3.6.1.4.1.629.202.3.4.1.8 | Counter32 | read-only | The average transit time (nanosec) for monitored 1519-2047 byte frames. |
| C32 nbsEusmPmAvgOvr2047 | 1.3.6.1.4.1.629.202.3.4.1.9 | Counter32 | read-only | The average transit time (nanosec) for monitored 2048-plus byte frames. |
| C32 nbsEusmPmMinAllSizes | 1.3.6.1.4.1.629.202.3.4.1.10 | Counter32 | read-only | The minimum transit time (nanosec) for monitored frames. |
| C32 nbsEusmPmMin64 | 1.3.6.1.4.1.629.202.3.4.1.11 | Counter32 | read-only | The minimum transit time (nanosec) for monitored 64 byte frames. |
| C32 nbsEusmPmMin127 | 1.3.6.1.4.1.629.202.3.4.1.12 | Counter32 | read-only | The minimum transit time (nanosec) for monitored 65-127 byte frames. |
| C32 nbsEusmPmMin255 | 1.3.6.1.4.1.629.202.3.4.1.13 | Counter32 | read-only | The minimum transit time (nanosec) for monitored 128-255 byte frames. |
| C32 nbsEusmPmMin511 | 1.3.6.1.4.1.629.202.3.4.1.14 | Counter32 | read-only | The minimum transit time (nanosec) for monitored 256-511 byte frames. |
| C32 nbsEusmPmMin1023 | 1.3.6.1.4.1.629.202.3.4.1.15 | Counter32 | read-only | The minimum transit time (nanosec) for monitored 512-1023 byte frames. |
| C32 nbsEusmPmMin1518 | 1.3.6.1.4.1.629.202.3.4.1.16 | Counter32 | read-only | The minimum transit time (nanosec) for monitored 1024-1518 byte frames. |
| C32 nbsEusmPmMin2047 | 1.3.6.1.4.1.629.202.3.4.1.17 | Counter32 | read-only | The minimum transit time (nanosec) for monitored 1519-2047 byte frames. |
| C32 nbsEusmPmMinOvr2047 | 1.3.6.1.4.1.629.202.3.4.1.18 | Counter32 | read-only | The minimum transit time (nanosec) for monitored 2048-plus byte frames. |
| C32 nbsEusmPmMaxAllSizes | 1.3.6.1.4.1.629.202.3.4.1.19 | Counter32 | read-only | The maximum transit time (nanosec) for monitored frames. |
| C32 nbsEusmPmMax64 | 1.3.6.1.4.1.629.202.3.4.1.20 | Counter32 | read-only | The maximum transit time (nanosec) for monitored 64 byte frames. |
| C32 nbsEusmPmMax127 | 1.3.6.1.4.1.629.202.3.4.1.21 | Counter32 | read-only | The maximum transit time (nanosec) for monitored 65-127 byte frames. |
| C32 nbsEusmPmMax255 | 1.3.6.1.4.1.629.202.3.4.1.22 | Counter32 | read-only | The maximum transit time (nanosec) for monitored 128-255 byte frames. |
| C32 nbsEusmPmMax511 | 1.3.6.1.4.1.629.202.3.4.1.23 | Counter32 | read-only | The maximum transit time (nanosec) for monitored 256-511 byte frames. |
| C32 nbsEusmPmMax1023 | 1.3.6.1.4.1.629.202.3.4.1.24 | Counter32 | read-only | The maximum transit time (nanosec) for monitored 512-1023 byte frames. |
| C32 nbsEusmPmMax1518 | 1.3.6.1.4.1.629.202.3.4.1.25 | Counter32 | read-only | The maximum transit time (nanosec) for monitored 1024-1518 byte frames. |
| C32 nbsEusmPmMax2047 | 1.3.6.1.4.1.629.202.3.4.1.26 | Counter32 | read-only | The maximum transit time (nanosec) for monitored 1519-2047 byte frames. |
| C32 nbsEusmPmMaxOvr2047 | 1.3.6.1.4.1.629.202.3.4.1.27 | Counter32 | read-only | The maximum transit time (nanosec) for monitored 2048-plus byte frames. |
| C64 nbsEusmPmFramesAllSizes | 1.3.6.1.4.1.629.202.3.4.1.28 | Counter64 | read-only | The count of all monitored frames. |
| C64 nbsEusmPmFrames64 | 1.3.6.1.4.1.629.202.3.4.1.29 | Counter64 | read-only | The count of all monitored 64 byte frames. |
| C64 nbsEusmPmFrames127 | 1.3.6.1.4.1.629.202.3.4.1.30 | Counter64 | read-only | The count of all monitored 65-127 byte frames. |
| C64 nbsEusmPmFrames255 | 1.3.6.1.4.1.629.202.3.4.1.31 | Counter64 | read-only | The count of all monitored 128-255 byte frames. |
| C64 nbsEusmPmFrames511 | 1.3.6.1.4.1.629.202.3.4.1.32 | Counter64 | read-only | The count of all monitored 256-511 byte frames. |
| C64 nbsEusmPmFrames1023 | 1.3.6.1.4.1.629.202.3.4.1.33 | Counter64 | read-only | The count of all monitored 512-1023 byte frames. |
| C64 nbsEusmPmFrames1518 | 1.3.6.1.4.1.629.202.3.4.1.34 | Counter64 | read-only | The count of all monitored 1024-1518 byte frames. |
| C64 nbsEusmPmFrames2047 | 1.3.6.1.4.1.629.202.3.4.1.35 | Counter64 | read-only | The count of all monitored 1519-2047 byte frames. |
| C64 nbsEusmPmFramesOvr2047 | 1.3.6.1.4.1.629.202.3.4.1.36 | Counter64 | read-only | The count of all monitored 2048-plus byte frames. |
| C64 nbsEusmPmOctetsAllSizes | 1.3.6.1.4.1.629.202.3.4.1.37 | Counter64 | read-only | The count of octets in all monitored frames. |
| C64 nbsEusmPmOctets64 | 1.3.6.1.4.1.629.202.3.4.1.38 | Counter64 | read-only | The count of octets in all monitored 64 byte frames. |
| C64 nbsEusmPmOctets127 | 1.3.6.1.4.1.629.202.3.4.1.39 | Counter64 | read-only | The count of octets in all monitored 65-127 byte frames. |
| C64 nbsEusmPmOctets255 | 1.3.6.1.4.1.629.202.3.4.1.40 | Counter64 | read-only | The count of octets in all monitored 128-255 byte frames. |
| C64 nbsEusmPmOctets511 | 1.3.6.1.4.1.629.202.3.4.1.41 | Counter64 | read-only | The count of octets in all monitored 256-511 byte frames. |
| C64 nbsEusmPmOctets1023 | 1.3.6.1.4.1.629.202.3.4.1.42 | Counter64 | read-only | The count of octets in all monitored 512-1023 byte frames. |
| C64 nbsEusmPmOctets1518 | 1.3.6.1.4.1.629.202.3.4.1.43 | Counter64 | read-only | The count of octets in all monitored 1024-1518 byte frames. |
| C64 nbsEusmPmOctets2047 | 1.3.6.1.4.1.629.202.3.4.1.44 | Counter64 | read-only | The count of octets in all monitored 1519-2047 byte frames. |
| C64 nbsEusmPmOctetsOvr2047 | 1.3.6.1.4.1.629.202.3.4.1.45 | Counter64 | read-only | The count of octets in all monitored 2048-plus byte frames. |
| INT nbsEusmSlotPmInterval | 1.3.6.1.4.1.629.202.3.4.1.46 | INTEGER | read-write | Performance Monitoring time duration (sec). Practical range allowed is 1 minute to 1 week. |
| INT nbsEusmSlotPmSelector | 1.3.6.1.4.1.629.202.3.4.1.47 | INTEGER | read-write | Performance Monitoring traffic direction selector. coToCpe(2) measures from CO's active trunk port to CPE's active trunk port. cpeToCo(3) measures from CPE's active trunk port to CO's active trunk port. To measure from one CPE to another, the user should designate the source CPE as cpeTx(4) and the destination CPE as cpeRx(5). The reflector CPE must be activated before the source CPE. |
| INT nbsEusmSlotPmAction | 1.3.6.1.4.1.629.202.3.4.1.48 | INTEGER | read-write | Traffic Analysis (performance monitoring) activity status. |
| OCT nbsEusmSlotPmCapabilities | 1.3.6.1.4.1.629.202.3.4.1.49 | OCTET STRING | read-only | This bitmask indicates which performance monitoring selectors this slot can support. This object is mandatory for all slots in systems where the nbsEusmSlotPmSelector object is supported. Each capability is represented by one bit. Set bit to 1 to advertise capability, 0 to deny it. Capability Bit -------------- --- reserved 0 notSupported 1 coToCpe 2 cpeToCo 3 cpeTx 4 cpeRx 5 OCTET STRING bitmasks count the leftmost bit (MSB) as 0. A zero length OCTET STRING indicates that this object is not supported. |
RFC description
MRV EUSM board slot context, port features, and testing capabilities for network interface modules.
Start monitoring MRV Communications NBS modular Ethernet switch/media-converter chassis (EUSM) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.