All MIBs › Nortel-MsCarrier-MscPassport-MgmtInterfacesMIB
Category: Management & Admin Interfaces, Nortel MsCarrier MscPassport
Description: Defines SNMP objects for management interface configuration (Ethernet, console) on Nortel MsCarrier MscPassport switches.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is Nortel-MsCarrier-MscPassport-MgmtInterfacesMIB?
Nortel-MsCarrier-MscPassport-MgmtInterfacesMIB is a Nortel proprietary MIB for the MSCarrier/Passport (later Alcatel-Lucent) family of multiservice switching platforms, defining management interface objects for components such as Ethernet management ports and console connections used to administer the switch itself. Its content centers on row-status-driven component tables tracking the presence, storage type, and administrative row status of management-interface components, both at a general and local-component level. As a configuration/inventory-oriented MIB it supports monitoring whether expected management interface components are provisioned (active) and how they are stored (volatile/nonVolatile), functioning as a software-configuration health check for the switch's out-of-band management path rather than exposing performance counters or environmental sensors. No explicit dependency on other MIBs is indicated beyond the vendor's broader MscPassport MIB family conventions. It is typically deployed on legacy Nortel/Bay Networks MscPassport multiservice switching platforms in carrier and enterprise core networks. Engineers can download the Nortel-MsCarrier-MscPassport-MgmtInterfacesMIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in Nortel-MsCarrier-MscPassport-MgmtInterfacesMIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Nortel/Bay Networks MscPassport multiservice switching platforms
Monitoring Examples
An administrator would poll mscNmisRowStatusTable/mscNmisRowStatusEntry, keyed by mscNmisIndex, to check mscNmisRowStatus and mscNmisComponentName for each management-interface component, confirming it reads active rather than notInService or destroyed. The parallel mscNmisLocalRowStatusTable/mscNmisLocalRowStatusEntry provides the same visibility scoped to local management components, letting an operator detect if a local management interface component was unexpectedly deleted or left in a non-active row state. mscNmisStorageType would be checked to confirm whether a given management-interface configuration entry persists across reboots.
What Can Be Monitored
- management interface component row status
- component name
- storage type (volatile/nonvolatile)
- local management interface row status
This MIB depends on
Related MIBs
Imported Objects
From Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB
| DisplayString | |
| Integer32 | |
| RowPointer | |
| RowStatus | |
| StorageType | |
| Unsigned32 |
From Nortel-MsCarrier-MscPassport-TextualConventionsMIB
| AsciiString | |
| AsciiStringIndex | |
| NonReplicated |
From Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
| mscComponents | OBJECT-IDENTITY |
| mscPassportMIBs | OBJECT-IDENTITY |
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| IpAddress |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| mscNmis | 1.3.6.1.4.1.562.36.2.1.17 | |||
| mscNmisRowStatusTable | 1.3.6.1.4.1.562.36.2.1.17.1 | not-accessible | This entry controls the addition and deletion of mscNmis components. | |
| mscNmisRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.17.1.1 | not-accessible | A single entry in the table represents a single mscNmis component. | |
| ROW mscNmisRowStatus | 1.3.6.1.4.1.562.36.2.1.17.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscNmis components. These components cannot be added nor deleted. |
| STR mscNmisComponentName | 1.3.6.1.4.1.562.36.2.1.17.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscNmisStorageType | 1.3.6.1.4.1.562.36.2.1.17.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscNmis tables. |
| NON mscNmisIndex | 1.3.6.1.4.1.562.36.2.1.17.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscNmis tables. |
| mscNmisLocal | 1.3.6.1.4.1.562.36.2.1.17.2 | |||
| mscNmisLocalRowStatusTable | 1.3.6.1.4.1.562.36.2.1.17.2.1 | not-accessible | This entry controls the addition and deletion of mscNmisLocal components. | |
| mscNmisLocalRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.17.2.1.1 | not-accessible | A single entry in the table represents a single mscNmisLocal component. | |
| ROW mscNmisLocalRowStatus | 1.3.6.1.4.1.562.36.2.1.17.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscNmisLocal components. These components cannot be added nor deleted. |
| STR mscNmisLocalComponentName | 1.3.6.1.4.1.562.36.2.1.17.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscNmisLocalStorageType | 1.3.6.1.4.1.562.36.2.1.17.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscNmisLocal tables. |
| NON mscNmisLocalIndex | 1.3.6.1.4.1.562.36.2.1.17.2.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscNmisLocal tables. |
| mscNmisLocalSession | 1.3.6.1.4.1.562.36.2.1.17.2.2 | |||
| mscNmisLocalSessionRowStatusTable | 1.3.6.1.4.1.562.36.2.1.17.2.2.1 | not-accessible | This entry controls the addition and deletion of mscNmisLocalSession components. | |
| mscNmisLocalSessionRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.17.2.2.1.1 | not-accessible | A single entry in the table represents a single mscNmisLocalSession component. | |
| ROW mscNmisLocalSessionRowStatus | 1.3.6.1.4.1.562.36.2.1.17.2.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscNmisLocalSession components. These components cannot be added nor deleted. |
| STR mscNmisLocalSessionComponentName | 1.3.6.1.4.1.562.36.2.1.17.2.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscNmisLocalSessionStorageType | 1.3.6.1.4.1.562.36.2.1.17.2.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscNmisLocalSession tables. |
| I32 mscNmisLocalSessionIndex | 1.3.6.1.4.1.562.36.2.1.17.2.2.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscNmisLocalSession tables. |
| mscNmisLocalSessionOperTable | 1.3.6.1.4.1.562.36.2.1.17.2.2.10 | not-accessible | This group contains the operational attributes for a Local session. | |
| mscNmisLocalSessionOperEntry | 1.3.6.1.4.1.562.36.2.1.17.2.2.10.1 | not-accessible | An entry in the mscNmisLocalSessionOperTable. | |
| STR mscNmisLocalSessionUserid | 1.3.6.1.4.1.562.36.2.1.17.2.2.10.1.1 | AsciiString | read-only | This attribute indicates the Userid logged in to the Session. |
| OCT mscNmisLocalSessionDataStreams | 1.3.6.1.4.1.562.36.2.1.17.2.2.10.1.2 | OCTET STRING | read-write | This attribute indicates which data streams will be transmitted back to the operator through this session. Only a userid with a command impact of system administration may register for logs. Description of bits: notused0(0) alarm(1) log(2) debug(3) scn(4) |
| NUM mscNmisLocalSessionHostCard | 1.3.6.1.4.1.562.36.2.1.17.2.2.10.1.3 | RowPointer | read-only | This attribute holds the component name of the host control processor Card servicing the local operator session. |
| U32 mscNmisLocalSessionScreenWidth | 1.3.6.1.4.1.562.36.2.1.17.2.2.10.1.4 | Unsigned32 | read-write | This attribute indicates the maximum width (in characters) of operator command responses. Beyond this maximum, responses are either truncated or wrapped onto the next line, as appropriate. Asynchronous responses, such as alarms, are always displayed using a 79 character width. |
| mscNmisLocalStateTable | 1.3.6.1.4.1.562.36.2.1.17.2.10 | not-accessible | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide. | |
| mscNmisLocalStateEntry | 1.3.6.1.4.1.562.36.2.1.17.2.10.1 | not-accessible | An entry in the mscNmisLocalStateTable. | |
| INT mscNmisLocalAdminState | 1.3.6.1.4.1.562.36.2.1.17.2.10.1.1 | INTEGER | read-only | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. |
| INT mscNmisLocalOperationalState | 1.3.6.1.4.1.562.36.2.1.17.2.10.1.2 | INTEGER | read-only | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. |
| INT mscNmisLocalUsageState | 1.3.6.1.4.1.562.36.2.1.17.2.10.1.3 | INTEGER | read-only | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. |
| mscNmisLocalOperTable | 1.3.6.1.4.1.562.36.2.1.17.2.11 | not-accessible | This group contains the operational attributes for an NMIS manager. This group is common to all NMIS managers. | |
| mscNmisLocalOperEntry | 1.3.6.1.4.1.562.36.2.1.17.2.11.1 | not-accessible | An entry in the mscNmisLocalOperTable. | |
| U32 mscNmisLocalMaxAllowedSessions | 1.3.6.1.4.1.562.36.2.1.17.2.11.1.1 | Unsigned32 | read-only | This attribute indicates the maximum number of simultaneous sessions the manager will allow. |
| U32 mscNmisLocalActiveSessions | 1.3.6.1.4.1.562.36.2.1.17.2.11.1.2 | Unsigned32 | read-only | This attribute indicates the number of simultaneous sessions currently active under the manager. Note that there may be fewer Session components than what is shown here, since an active session could be in the midst of logging in and may not yet be fully up. |
| mscNmisTelnet | 1.3.6.1.4.1.562.36.2.1.17.3 | |||
| mscNmisTelnetRowStatusTable | 1.3.6.1.4.1.562.36.2.1.17.3.1 | not-accessible | This entry controls the addition and deletion of mscNmisTelnet components. | |
| mscNmisTelnetRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.17.3.1.1 | not-accessible | A single entry in the table represents a single mscNmisTelnet component. | |
| ROW mscNmisTelnetRowStatus | 1.3.6.1.4.1.562.36.2.1.17.3.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscNmisTelnet components. These components cannot be added nor deleted. |
| STR mscNmisTelnetComponentName | 1.3.6.1.4.1.562.36.2.1.17.3.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscNmisTelnetStorageType | 1.3.6.1.4.1.562.36.2.1.17.3.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscNmisTelnet tables. |
| NON mscNmisTelnetIndex | 1.3.6.1.4.1.562.36.2.1.17.3.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscNmisTelnet tables. |
| mscNmisTelnetSession | 1.3.6.1.4.1.562.36.2.1.17.3.2 | |||
| mscNmisTelnetSessionRowStatusTable | 1.3.6.1.4.1.562.36.2.1.17.3.2.1 | not-accessible | This entry controls the addition and deletion of mscNmisTelnetSession components. | |
| mscNmisTelnetSessionRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.17.3.2.1.1 | not-accessible | A single entry in the table represents a single mscNmisTelnetSession component. | |
| ROW mscNmisTelnetSessionRowStatus | 1.3.6.1.4.1.562.36.2.1.17.3.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscNmisTelnetSession components. These components cannot be added nor deleted. |
| STR mscNmisTelnetSessionComponentName | 1.3.6.1.4.1.562.36.2.1.17.3.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscNmisTelnetSessionStorageType | 1.3.6.1.4.1.562.36.2.1.17.3.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscNmisTelnetSession tables. |
| I32 mscNmisTelnetSessionIndex | 1.3.6.1.4.1.562.36.2.1.17.3.2.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscNmisTelnetSession tables. |
| mscNmisTelnetSessionClient | 1.3.6.1.4.1.562.36.2.1.17.3.2.2 | |||
| mscNmisTelnetSessionClientRowStatusTable | 1.3.6.1.4.1.562.36.2.1.17.3.2.2.1 | not-accessible | This entry controls the addition and deletion of mscNmisTelnetSessionClient components. | |
| mscNmisTelnetSessionClientRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.17.3.2.2.1.1 | not-accessible | A single entry in the table represents a single mscNmisTelnetSessionClient component. | |
| ROW mscNmisTelnetSessionClientRowStatus | 1.3.6.1.4.1.562.36.2.1.17.3.2.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscNmisTelnetSessionClient components. These components cannot be added nor deleted. |
| STR mscNmisTelnetSessionClientComponentName | 1.3.6.1.4.1.562.36.2.1.17.3.2.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscNmisTelnetSessionClientStorageType | 1.3.6.1.4.1.562.36.2.1.17.3.2.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscNmisTelnetSessionClient tables. |
| NON mscNmisTelnetSessionClientIndex | 1.3.6.1.4.1.562.36.2.1.17.3.2.2.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscNmisTelnetSessionClient tables. |
| mscNmisTelnetSessionClientOperTable | 1.3.6.1.4.1.562.36.2.1.17.3.2.2.10 | not-accessible | This group contains the operational attributes for a Telnet client. | |
| mscNmisTelnetSessionClientOperEntry | 1.3.6.1.4.1.562.36.2.1.17.3.2.2.10.1 | not-accessible | An entry in the mscNmisTelnetSessionClientOperTable. | |
| NUM mscNmisTelnetSessionClientVirtualRouter | 1.3.6.1.4.1.562.36.2.1.17.3.2.2.10.1.1 | RowPointer | read-only | This attribute indicates the VR instance that determines which address space the remoteIpAddr belongs to. |
| IP mscNmisTelnetSessionClientRemoteIpAddr | 1.3.6.1.4.1.562.36.2.1.17.3.2.2.10.1.2 | IpAddress | read-only | This attribute indicates the IP address of the remote side of the client connection. |
| U32 mscNmisTelnetSessionClientRemoteTcpPort | 1.3.6.1.4.1.562.36.2.1.17.3.2.2.10.1.3 | Unsigned32 | read-only | This attribute indicates the TCP port number of the remote side of the client connection. |
| mscNmisTelnetSessionOperTable | 1.3.6.1.4.1.562.36.2.1.17.3.2.10 | not-accessible | This group contains the operational attributes for a Telnet session. | |
| mscNmisTelnetSessionOperEntry | 1.3.6.1.4.1.562.36.2.1.17.3.2.10.1 | not-accessible | An entry in the mscNmisTelnetSessionOperTable. | |
| STR mscNmisTelnetSessionUserid | 1.3.6.1.4.1.562.36.2.1.17.3.2.10.1.1 | AsciiString | read-only | This attribute indicates the userid logged in to the session. |
| OCT mscNmisTelnetSessionDataStreams | 1.3.6.1.4.1.562.36.2.1.17.3.2.10.1.2 | OCTET STRING | read-write | This attribute indicates which data streams (alarm, debug, log, scn) will be transmitted back to the operator through this session. Only a userid with a command impact of system administration may register for logs. When a client connection is up through this interface, all of the values are turned off. This means that this data is discarded when the session has a Telnet client connection set up. When the client connection terminates, the data which was being received prior to the client being set up is requested again. Description of bits: notused0(0) alarm(1) log(2) debug(3) scn(4) |
| IP mscNmisTelnetSessionRemoteIpAddr | 1.3.6.1.4.1.562.36.2.1.17.3.2.10.1.3 | IpAddress | read-only | This attribute indicates the IP address of the remote device connected to the session. |
| U32 mscNmisTelnetSessionRemoteTcpPort | 1.3.6.1.4.1.562.36.2.1.17.3.2.10.1.4 | Unsigned32 | read-only | This attribute indicates the TCP port number of the Telnet client being used on the remote device connected to the session. |
| U32 mscNmisTelnetSessionScreenWidth | 1.3.6.1.4.1.562.36.2.1.17.3.2.10.1.5 | Unsigned32 | read-write | This attribute indicates the maximum width (in characters) of operator command responses. Beyond this maximum, responses are either truncated or wrapped onto the next line, as appropriate. Asynchronous responses, such as alarms, are always displayed using a 79 character width. |
| mscNmisTelnetStateTable | 1.3.6.1.4.1.562.36.2.1.17.3.10 | not-accessible | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide. | |
| mscNmisTelnetStateEntry | 1.3.6.1.4.1.562.36.2.1.17.3.10.1 | not-accessible | An entry in the mscNmisTelnetStateTable. | |
| INT mscNmisTelnetAdminState | 1.3.6.1.4.1.562.36.2.1.17.3.10.1.1 | INTEGER | read-only | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. |
| INT mscNmisTelnetOperationalState | 1.3.6.1.4.1.562.36.2.1.17.3.10.1.2 | INTEGER | read-only | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. |
| INT mscNmisTelnetUsageState | 1.3.6.1.4.1.562.36.2.1.17.3.10.1.3 | INTEGER | read-only | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. |
| mscNmisTelnetOperTable | 1.3.6.1.4.1.562.36.2.1.17.3.11 | not-accessible | This group contains the operational attributes for an NMIS manager. This group is common to all NMIS managers. | |
| mscNmisTelnetOperEntry | 1.3.6.1.4.1.562.36.2.1.17.3.11.1 | not-accessible | An entry in the mscNmisTelnetOperTable. | |
| U32 mscNmisTelnetMaxAllowedSessions | 1.3.6.1.4.1.562.36.2.1.17.3.11.1.1 | Unsigned32 | read-only | This attribute indicates the maximum number of simultaneous sessions the manager will allow. |
| U32 mscNmisTelnetActiveSessions | 1.3.6.1.4.1.562.36.2.1.17.3.11.1.2 | Unsigned32 | read-only | This attribute indicates the number of simultaneous sessions currently active under the manager. Note that there may be fewer Session components than what is shown here, since an active session could be in the midst of logging in and may not yet be fully up. |
| mscNmisFmip | 1.3.6.1.4.1.562.36.2.1.17.4 | |||
| mscNmisFmipRowStatusTable | 1.3.6.1.4.1.562.36.2.1.17.4.1 | not-accessible | This entry controls the addition and deletion of mscNmisFmip components. | |
| mscNmisFmipRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.17.4.1.1 | not-accessible | A single entry in the table represents a single mscNmisFmip component. | |
| ROW mscNmisFmipRowStatus | 1.3.6.1.4.1.562.36.2.1.17.4.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscNmisFmip components. These components cannot be added nor deleted. |
| STR mscNmisFmipComponentName | 1.3.6.1.4.1.562.36.2.1.17.4.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscNmisFmipStorageType | 1.3.6.1.4.1.562.36.2.1.17.4.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscNmisFmip tables. |
| NON mscNmisFmipIndex | 1.3.6.1.4.1.562.36.2.1.17.4.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscNmisFmip tables. |
| mscNmisFmipSession | 1.3.6.1.4.1.562.36.2.1.17.4.2 | |||
| mscNmisFmipSessionRowStatusTable | 1.3.6.1.4.1.562.36.2.1.17.4.2.1 | not-accessible | This entry controls the addition and deletion of mscNmisFmipSession components. | |
| mscNmisFmipSessionRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.17.4.2.1.1 | not-accessible | A single entry in the table represents a single mscNmisFmipSession component. | |
| ROW mscNmisFmipSessionRowStatus | 1.3.6.1.4.1.562.36.2.1.17.4.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscNmisFmipSession components. These components cannot be added nor deleted. |
| STR mscNmisFmipSessionComponentName | 1.3.6.1.4.1.562.36.2.1.17.4.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscNmisFmipSessionStorageType | 1.3.6.1.4.1.562.36.2.1.17.4.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscNmisFmipSession tables. |
| I32 mscNmisFmipSessionIndex | 1.3.6.1.4.1.562.36.2.1.17.4.2.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscNmisFmipSession tables. |
| mscNmisFmipSessionOperTable | 1.3.6.1.4.1.562.36.2.1.17.4.2.10 | not-accessible | This group contains the operational attributes for an FMIP session. | |
| mscNmisFmipSessionOperEntry | 1.3.6.1.4.1.562.36.2.1.17.4.2.10.1 | not-accessible | An entry in the mscNmisFmipSessionOperTable. | |
| STR mscNmisFmipSessionUserid | 1.3.6.1.4.1.562.36.2.1.17.4.2.10.1.1 | AsciiString | read-only | This attribute indicates the userid logged in to the session. |
| OCT mscNmisFmipSessionDataStreams | 1.3.6.1.4.1.562.36.2.1.17.4.2.10.1.2 | OCTET STRING | read-write | This attribute indicates which data streams will be transmitted back to the operator through this session. Only a userid with a command impact of system administration may register for logs. Description of bits: notused0(0) alarm(1) log(2) debug(3) scn(4) |
| IP mscNmisFmipSessionRemoteIpAddr | 1.3.6.1.4.1.562.36.2.1.17.4.2.10.1.3 | IpAddress | read-only | This attribute indicates the IP address of the remote device connected to the session. |
| U32 mscNmisFmipSessionRemoteTcpPort | 1.3.6.1.4.1.562.36.2.1.17.4.2.10.1.4 | Unsigned32 | read-only | This attribute indicates the TCP port number of the FMIP client being used on the remote device connected to the session. |
| U32 mscNmisFmipSessionScreenWidth | 1.3.6.1.4.1.562.36.2.1.17.4.2.10.1.5 | Unsigned32 | read-write | This attribute indicates the maximum width (in characters) of operator command responses. Beyond this maximum, responses are either truncated or wrapped onto the next line, as appropriate. Asynchronous responses, such as alarms, are always displayed using a 79 character width. |
| mscNmisFmipStateTable | 1.3.6.1.4.1.562.36.2.1.17.4.10 | not-accessible | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide. | |
| mscNmisFmipStateEntry | 1.3.6.1.4.1.562.36.2.1.17.4.10.1 | not-accessible | An entry in the mscNmisFmipStateTable. | |
| INT mscNmisFmipAdminState | 1.3.6.1.4.1.562.36.2.1.17.4.10.1.1 | INTEGER | read-only | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. |
| INT mscNmisFmipOperationalState | 1.3.6.1.4.1.562.36.2.1.17.4.10.1.2 | INTEGER | read-only | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. |
| INT mscNmisFmipUsageState | 1.3.6.1.4.1.562.36.2.1.17.4.10.1.3 | INTEGER | read-only | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. |
| mscNmisFmipOperTable | 1.3.6.1.4.1.562.36.2.1.17.4.11 | not-accessible | This group contains the operational attributes for an NMIS manager. This group is common to all NMIS managers. | |
| mscNmisFmipOperEntry | 1.3.6.1.4.1.562.36.2.1.17.4.11.1 | not-accessible | An entry in the mscNmisFmipOperTable. | |
| U32 mscNmisFmipMaxAllowedSessions | 1.3.6.1.4.1.562.36.2.1.17.4.11.1.1 | Unsigned32 | read-only | This attribute indicates the maximum number of simultaneous sessions the manager will allow. |
| U32 mscNmisFmipActiveSessions | 1.3.6.1.4.1.562.36.2.1.17.4.11.1.2 | Unsigned32 | read-only | This attribute indicates the number of simultaneous sessions currently active under the manager. Note that there may be fewer Session components than what is shown here, since an active session could be in the midst of logging in and may not yet be fully up. |
| mscNmisFtp | 1.3.6.1.4.1.562.36.2.1.17.5 | |||
| mscNmisFtpRowStatusTable | 1.3.6.1.4.1.562.36.2.1.17.5.1 | not-accessible | This entry controls the addition and deletion of mscNmisFtp components. | |
| mscNmisFtpRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.17.5.1.1 | not-accessible | A single entry in the table represents a single mscNmisFtp component. | |
| ROW mscNmisFtpRowStatus | 1.3.6.1.4.1.562.36.2.1.17.5.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscNmisFtp components. These components cannot be added nor deleted. |
| STR mscNmisFtpComponentName | 1.3.6.1.4.1.562.36.2.1.17.5.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscNmisFtpStorageType | 1.3.6.1.4.1.562.36.2.1.17.5.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscNmisFtp tables. |
| NON mscNmisFtpIndex | 1.3.6.1.4.1.562.36.2.1.17.5.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscNmisFtp tables. |
| mscNmisFtpSession | 1.3.6.1.4.1.562.36.2.1.17.5.2 | |||
| mscNmisFtpSessionRowStatusTable | 1.3.6.1.4.1.562.36.2.1.17.5.2.1 | not-accessible | This entry controls the addition and deletion of mscNmisFtpSession components. | |
| mscNmisFtpSessionRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.17.5.2.1.1 | not-accessible | A single entry in the table represents a single mscNmisFtpSession component. | |
| ROW mscNmisFtpSessionRowStatus | 1.3.6.1.4.1.562.36.2.1.17.5.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscNmisFtpSession components. These components cannot be added nor deleted. |
| STR mscNmisFtpSessionComponentName | 1.3.6.1.4.1.562.36.2.1.17.5.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscNmisFtpSessionStorageType | 1.3.6.1.4.1.562.36.2.1.17.5.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscNmisFtpSession tables. |
| I32 mscNmisFtpSessionIndex | 1.3.6.1.4.1.562.36.2.1.17.5.2.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscNmisFtpSession tables. |
| mscNmisFtpSessionOperTable | 1.3.6.1.4.1.562.36.2.1.17.5.2.10 | not-accessible | This group contains the operational attributes for an FTP session. | |
| mscNmisFtpSessionOperEntry | 1.3.6.1.4.1.562.36.2.1.17.5.2.10.1 | not-accessible | An entry in the mscNmisFtpSessionOperTable. | |
| STR mscNmisFtpSessionUserid | 1.3.6.1.4.1.562.36.2.1.17.5.2.10.1.1 | AsciiString | read-only | This attribute indicates the userid logged in to the session. |
| IP mscNmisFtpSessionRemoteIpAddr | 1.3.6.1.4.1.562.36.2.1.17.5.2.10.1.2 | IpAddress | read-only | This attribute indicates the IP address of the remote device connected to the session. |
| U32 mscNmisFtpSessionRemoteTcpPort | 1.3.6.1.4.1.562.36.2.1.17.5.2.10.1.3 | Unsigned32 | read-only | This attribute indicates the TCP port number of the FTP control connection being used on the remote device connected to the session. |
| mscNmisFtpStateTable | 1.3.6.1.4.1.562.36.2.1.17.5.10 | not-accessible | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide. | |
| mscNmisFtpStateEntry | 1.3.6.1.4.1.562.36.2.1.17.5.10.1 | not-accessible | An entry in the mscNmisFtpStateTable. | |
| INT mscNmisFtpAdminState | 1.3.6.1.4.1.562.36.2.1.17.5.10.1.1 | INTEGER | read-only | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. |
| INT mscNmisFtpOperationalState | 1.3.6.1.4.1.562.36.2.1.17.5.10.1.2 | INTEGER | read-only | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. |
| INT mscNmisFtpUsageState | 1.3.6.1.4.1.562.36.2.1.17.5.10.1.3 | INTEGER | read-only | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. |
| mscNmisFtpOperTable | 1.3.6.1.4.1.562.36.2.1.17.5.11 | not-accessible | This group contains the operational attributes for an NMIS manager. This group is common to all NMIS managers. | |
| mscNmisFtpOperEntry | 1.3.6.1.4.1.562.36.2.1.17.5.11.1 | not-accessible | An entry in the mscNmisFtpOperTable. | |
| U32 mscNmisFtpMaxAllowedSessions | 1.3.6.1.4.1.562.36.2.1.17.5.11.1.1 | Unsigned32 | read-only | This attribute indicates the maximum number of simultaneous sessions the manager will allow. |
| U32 mscNmisFtpActiveSessions | 1.3.6.1.4.1.562.36.2.1.17.5.11.1.2 | Unsigned32 | read-only | This attribute indicates the number of simultaneous sessions currently active under the manager. Note that there may be fewer Session components than what is shown here, since an active session could be in the midst of logging in and may not yet be fully up. |
| mscAc | 1.3.6.1.4.1.562.36.2.1.18 | |||
| mscAcRowStatusTable | 1.3.6.1.4.1.562.36.2.1.18.1 | not-accessible | This entry controls the addition and deletion of mscAc components. | |
| mscAcRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.18.1.1 | not-accessible | A single entry in the table represents a single mscAc component. | |
| ROW mscAcRowStatus | 1.3.6.1.4.1.562.36.2.1.18.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscAc components. These components can be added. |
| STR mscAcComponentName | 1.3.6.1.4.1.562.36.2.1.18.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscAcStorageType | 1.3.6.1.4.1.562.36.2.1.18.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscAc tables. |
| NON mscAcIndex | 1.3.6.1.4.1.562.36.2.1.18.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscAc tables. |
| mscAcUserid | 1.3.6.1.4.1.562.36.2.1.18.2 | |||
| mscAcUseridRowStatusTable | 1.3.6.1.4.1.562.36.2.1.18.2.1 | not-accessible | This entry controls the addition and deletion of mscAcUserid components. | |
| mscAcUseridRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.18.2.1.1 | not-accessible | A single entry in the table represents a single mscAcUserid component. | |
| ROW mscAcUseridRowStatus | 1.3.6.1.4.1.562.36.2.1.18.2.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscAcUserid components. These components can be added and deleted. |
| STR mscAcUseridComponentName | 1.3.6.1.4.1.562.36.2.1.18.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscAcUseridStorageType | 1.3.6.1.4.1.562.36.2.1.18.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscAcUserid tables. |
| STR mscAcUseridIndex | 1.3.6.1.4.1.562.36.2.1.18.2.1.1.10 | AsciiStringIndex | not-accessible | This variable represents the index for the mscAcUserid tables. |
| mscAcUseridProvTable | 1.3.6.1.4.1.562.36.2.1.18.2.10 | not-accessible | This group contains the provisionable attributes for a userid. | |
| mscAcUseridProvEntry | 1.3.6.1.4.1.562.36.2.1.18.2.10.1 | not-accessible | An entry in the mscAcUseridProvTable. | |
| STR mscAcUseridPassword | 1.3.6.1.4.1.562.36.2.1.18.2.10.1.1 | AsciiString | write-only | This attribute holds the password for the userid. This is a write-only attribute to provide additional security for passwords. The password string consists of 5-8 characters, which may be any printable ASCII characters. If the password string includes any non-alphanumeric character, such as $ or *, the entire string must be enclosed in double quotes. Letters in the password string are case-sensitive. |
| U32 mscAcUseridCustomerIdentifier | 1.3.6.1.4.1.562.36.2.1.18.2.10.1.2 | Unsigned32 | read-write | This attribute indicates the Customer Identifier (CID) assigned to the userid. The CID is used in Customer Network Management (CNM). A CNM operator may only send commands to components provisioned with the same CID as the operator. A CNM operator will only receive event data, such as alarms, which is generated by components provisioned with the same CID as the operator. The special CID of 0 is reserved for the network owner, known as the Netman. The Passport CID attribute is compatible with DPN-100 Netman and Basic CIDs. |
| INT mscAcUseridCommandScope | 1.3.6.1.4.1.562.36.2.1.18.2.10.1.3 | INTEGER | read-write | This attribute indicates the command scope assigned to the userid. The scope determines the importance of the components on which the userid will be allowed to execute commands. Scope has three levels: 1) Network scope implies the userid can manage components that affect the operation of the entire network, such as trunks. 2) Device scope implies the userid can manage components that affect the operation of the entire Passport module, such as processors or the file system. 3) Application scope implies the userid can manage components that affect the operation of a single application. Note that scope is hierarchical: A userid provisioned with network scope can also manage components with a scope of device or application. |
| INT mscAcUseridCommandImpact | 1.3.6.1.4.1.562.36.2.1.18.2.10.1.4 | INTEGER | read-write | This attribute indicates the command impact assigned to the userid. The impact determines the importance of the commands which the userid will be allowed to execute. Impact has five levels: 1) Debug impact implies the userid can issue all debugging commands. Debug is the highest impact level. 2) System Administration impact implies the userid can issue provisioning commands on security components. This means the userid can Add, Delete, Display, or Set the Userid and IpAccess subcomponents of AccessControl. 3) Configuration impact implies the userid can issue provisioning commands to alter the provisioned configuration of the Passport module, such as Start Prov, Add, Delete, and Set. 4) Service impact implies the userid can issue operational commands which may affect the service of running components, such as Lock and Unlock. 5) Passive impact implies the userid can only issue query commands which display unrestricted information but otherwise do not affect the operation or configuration of the Passport module. Commands such as List and Display. Passive is the lowest impact level. Note that impact is hierarchical: A userid provisioned with debug impact can also issue all other commands at lower impact levels. |
| OCT mscAcUseridAllowedAccess | 1.3.6.1.4.1.562.36.2.1.18.2.10.1.5 | OCTET STRING | read-write | This attribute indicates the set of network management interfaces through which the userid will be allowed incoming access to the Passport. The allowedAccess attribute can be used to restrict a userid to a desired subset of the network management interfaces provided. Description of bits: local(0) telnet(1) fmip(2) ftp(3) |
| STR mscAcUseridLoginDirectory | 1.3.6.1.4.1.562.36.2.1.18.2.10.1.6 | AsciiString | read-write | This attribute is the login directory for file system commands or FTP commands. The userid will initially be placed in this directory upon logging in to Telnet, FMIP, Local or FTP. The default value of '/' is the root of the /sfs/ shadowed file system. |
| OCT mscAcUseridAllowedOutAccess | 1.3.6.1.4.1.562.36.2.1.18.2.10.1.7 | OCTET STRING | read-write | This attribute indicates whether or not the userid will be allowed outgoing Telnet access from the Passport. Description of bits: telnet(0) |
| mscAcIpAccess | 1.3.6.1.4.1.562.36.2.1.18.3 | |||
| mscAcIpAccessRowStatusTable | 1.3.6.1.4.1.562.36.2.1.18.3.1 | not-accessible | This entry controls the addition and deletion of mscAcIpAccess components. | |
| mscAcIpAccessRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.18.3.1.1 | not-accessible | A single entry in the table represents a single mscAcIpAccess component. | |
| ROW mscAcIpAccessRowStatus | 1.3.6.1.4.1.562.36.2.1.18.3.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscAcIpAccess components. These components can be added and deleted. |
| STR mscAcIpAccessComponentName | 1.3.6.1.4.1.562.36.2.1.18.3.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscAcIpAccessStorageType | 1.3.6.1.4.1.562.36.2.1.18.3.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscAcIpAccess tables. |
| IP mscAcIpAccessIndex | 1.3.6.1.4.1.562.36.2.1.18.3.1.1.10 | IpAddress | not-accessible | This variable represents the index for the mscAcIpAccess tables. |
| mscAcIpAccessProvTable | 1.3.6.1.4.1.562.36.2.1.18.3.10 | not-accessible | This group contains the provisionable attributes for an IpAccess component. | |
| mscAcIpAccessProvEntry | 1.3.6.1.4.1.562.36.2.1.18.3.10.1 | not-accessible | An entry in the mscAcIpAccessProvTable. | |
| IP mscAcIpAccessIpAddressMask | 1.3.6.1.4.1.562.36.2.1.18.3.10.1.1 | IpAddress | read-write | This attribute indicates the bit mask indicating the significant bits which are used in the comparison of an incoming IP address against the 'friendly' IP address in the instance value of the IpAccess component. This bit mask is ANDed to the incoming IP address, and ANDed to the instance value, before the comparison. An IP subnetwork address, in combination with this bit mask attribute, may be provisioned to include an entire IP subnetwork into the friendly IP address list with a single IpAccess component. |
| mscAcProvTable | 1.3.6.1.4.1.562.36.2.1.18.10 | not-accessible | This group contains the provisionable attributes which apply to the overall access of the the node. | |
| mscAcProvEntry | 1.3.6.1.4.1.562.36.2.1.18.10.1 | not-accessible | An entry in the mscAcProvTable. | |
| OCT mscAcPublicKeyAuth | 1.3.6.1.4.1.562.36.2.1.18.10.1.1 | OCTET STRING | read-write | This attribute indicates whether Telnet sessions require a public key exchange in order to log in to the node. FMIP sessions always require a public key exchange for login authentication. Description of bits: telnet(0) |
| mgmtInterfacesMIB | 1.3.6.1.4.1.562.36.2.2.15 | |||
| mgmtInterfacesGroup | 1.3.6.1.4.1.562.36.2.2.15.1 | |||
| mgmtInterfacesGroupCA | 1.3.6.1.4.1.562.36.2.2.15.1.1 | |||
| mgmtInterfacesGroupCA02 | 1.3.6.1.4.1.562.36.2.2.15.1.1.3 | |||
| mgmtInterfacesGroupCA02A | 1.3.6.1.4.1.562.36.2.2.15.1.1.3.2 | |||
| mgmtInterfacesCapabilities | 1.3.6.1.4.1.562.36.2.2.15.3 | |||
| mgmtInterfacesCapabilitiesCA | 1.3.6.1.4.1.562.36.2.2.15.3.1 | |||
| mgmtInterfacesCapabilitiesCA02 | 1.3.6.1.4.1.562.36.2.2.15.3.1.3 | |||
| mgmtInterfacesCapabilitiesCA02A | 1.3.6.1.4.1.562.36.2.2.15.3.1.3.2 |
RFC description
Nortel MsCarrier Passport management interfaces MIB for NMIS network management system configuration.
Start monitoring Nortel/Bay Networks MscPassport switch (management interface ports) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.