All MIBs › NTNTECH-NMS-TRAPS-V1-MIB
Category: DSL and Broadband Access
Description: Specifies SNMPv1 trap notifications covering hardware faults, line state changes, and threshold events for Paradyne nTech DSL equipment.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is NTNTECH-NMS-TRAPS-V1-MIB?
NTNTECH-NMS-TRAPS-V1-MIB is a Paradyne/NTNTech enterprise SNMPv1 trap MIB defining the fault, line-state, and threshold-crossing notifications generated by nTech DSL access equipment. It belongs to the DSL/telecom access-equipment fault-management category, and its content is entirely trap/notification definitions rather than polled data tables. Its role is explicitly hardware/software status monitoring: it lets the DSL equipment proactively notify a management station of hardware faults, DSL line-state transitions, and threshold events, so operators react to equipment problems as they happen rather than through polling. As a trap-only module it depends on the vendor's underlying DSL/line-status object definitions for the varbinds carried in its traps. It is typically deployed on Paradyne/NTNTech DSL access equipment in telecom access networks, where NTNTECH-NMS-TRAPS-V1-MIB SNMP monitoring relies on an NMS configured to receive and correlate these fault and threshold-crossing traps.
IPNetwork Monitor allows you to monitor SNMP objects defined in NTNTECH-NMS-TRAPS-V1-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Paradyne / Net to Net Technologies DSL access equipment
Monitoring Examples
No module description or sample objects were supplied for this MIB, so specific trap names cannot be confirmed; based on its stated purpose, an NMS would be configured to receive its line-state-change and threshold-crossing traps to detect a DSL line going down or a signal-quality threshold being exceeded, but the exact trap identifiers cannot be verified from the given information.
Imported Objects
From NTNTECH-CHASSIS-STATUS-MIB
| mumStaFanState | OBJECT-TYPE |
From NTNTECH-INTERFACE-MODULE-STATUS-MIB
| ifStaSlotIndex | OBJECT-TYPE |
| ifStaType | OBJECT-TYPE |
From NTNTECH-ROOT-MIB
| ntntechNMSTraps | OBJECT-IDENTITY |
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
OIDs
RFC description
Defines SNMPv1 traps for hardware faults, line state changes, and threshold events on Paradyne nTech DSL equipment.
Start monitoring Paradyne/Net to Net Technologies DSL equipment with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.