NTNTECH-INTERFACE-MODULE-STATUS-MIB

All MIBs › NTNTECH-INTERFACE-MODULE-STATUS-MIB

Organization: Paradyne Corporation

Last Updated: 2004-11-17

Category: DSL and Broadband Access

Description: Monitors DSL interface module sync status, line rates, and error counters on Paradyne nTech DSL equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NTNTECH-INTERFACE-MODULE-STATUS-MIB?

This MIB module, from Paradyne Corporation (nTech), manages DSL/DSLAM interface module status for a family of ADSL and E1 access multiplexer products, including the AMD8000, AAM8000, and EAM2000 DSLAM lines. It exposes per-port interface statistics and status tables covering line synchronization state, rate, and error conditions across the DSL ports on these chassis. Its central monitoring use is hardware/line status: tracking whether individual DSL interface modules and their ports are synchronized and operating within expected parameters, effectively serving as a health check for physical-layer connectivity on DSLAM line cards. Its 'ifSta'-prefixed object names mirror standard IF-MIB ifTable semantics, suggesting it is used alongside standard interface MIB conventions. It is deployed in DSL access network operator environments managing Paradyne DSLAM chassis for residential/business broadband delivery. Engineers can download the NTNTECH-INTERFACE-MODULE-STATUS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in NTNTECH-INTERFACE-MODULE-STATUS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Paradyne IPD12000/IPD4000/Mini-Micro DSLAM
AMD8000/AAM8000/EAM2000 DSL access multiplexers

Monitoring Examples

An operator would poll ifStaTable (rows in ifStaEntry) and the related ifStaPortTable/ifStaPortEntry to check per-port DSL line status and counts (ifStaCount) across a DSLAM chassis, using valInterface to identify the specific physical interface. A drop in synchronized ports or an unexpected value under ifModStaValues would indicate a DSL line fault or a failing interface module needing field replacement.

What Can Be Monitored

DSL port sync status
per-port interface statistics
interface module status counts
line rate/error conditions

Imported Objects

From NTNTECH-ROOT-MIB

NtnCounter32
NtnDisplayString
NtnGauge32
NtnMacAddress
NtnTimeTicks
ntntechInterfaceModule	OBJECT-IDENTITY

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
ntntechInterfaceModuleStatusMIB	1.3.6.1.4.1.8059.1.2.2			This mib module defines an SNMP API to manage the Paradyne Corporation's IPD12000, IPD4000, and Mini/Micro DSLAM interface statistics. The interface types are described below, AMD8000-12 12-Port ADSL Mini DSLAMs With Full Rate and G.lite Operational Modes AAM8000-12 12-Port ADSL Access Multiplexer with Full Rate and G.lite Operational Modes AAM8000-24 24-Port ADSL Access Multiplexer with Full Rate and G.lite Operational Modes EAM2000-12 12-Port E1 Access Multiplexer TAM1500-12 12-Port T1 Access Multiplexer IAM144-12 12-Port IDSL Access Multiplexer SAM1000-12 12-Port SDSL Access Multiplexer SAM2000-12, SAM2000Q-12, and SAM2000G-12 12-Port SDSL Access Multiplexers with CAP, 2B1Q or TC/PAM (G.SHDSL) encoding SAM2000D-12 12-Port SDSL Access Multiplexer W/O voice daughter card, running CAP encoding SAM2000DQ-12 12-Port SDSL Access Multiplexer W/O voice daughter card, running 2B1Q encoding SAM2000V-12, SAM2000QV-12, SAM2000GV-12 12-Port SDSL Access Multiplexers with Voice Capability running CAP, 2B1Q or TC/PAM (G.SHDSL) encoding SIM2000-12 12-Port SDSL Access Multiplexer with CAP, 2B1Q and TC/PAM (G.SHDSL) encoding SIM2000-24 24-Port SDSL Access Multiplexer with CAP, 2B1Q and TC/PAM (G.SHDSL) encoding SMD2000-12, SMD2000Q-12, SMD2000G-12 12-Port SDSL Mini DSLAMs: AC and DC Versions with Cap, 2B1Q and G.SHDSL Line encoding SuD2011_12T, SuD2011_12E, SuD2003_12T, SuD2003_12E 12-Port SDSL Micro DSLAMs: Cap, 2B1Q and G.SHDSL Line encoding SuD2011_6T, SuD2011_6E, SuD2002_6T, SuD2002_6E 6-Port SDSL Micro DSLAMs: Cap, 2B1Q and G.SHDSL Line encoding
ifModStaMIBObjects	1.3.6.1.4.1.8059.1.2.2.1
ifModStaValues	1.3.6.1.4.1.8059.1.2.2.1.1
valInterface	1.3.6.1.4.1.8059.1.2.2.1.1.1
INT ifStaCount	1.3.6.1.4.1.8059.1.2.2.1.1.1.1	INTEGER	read-only	The number of interfaces physically within the chassis; type - IPD12000 (max 12), IPD4000 (max 4), Mini/Micro DSLAM (1).
ifStaTable	1.3.6.1.4.1.8059.1.2.2.1.1.1.2		not-accessible	A list of interface statistic entries.
ifStaEntry	1.3.6.1.4.1.8059.1.2.2.1.1.1.2.1		not-accessible	An entry containing management information applicable to the interface types available in the system.
INT ifStaSlotIndex	1.3.6.1.4.1.8059.1.2.2.1.1.1.2.1.1	INTEGER	read-only	The physical slot number of the IPD chassis to which the interface module resides. The Mini/Micro DSLAM will have a slot index value of 1.
INT ifStaType	1.3.6.1.4.1.8059.1.2.2.1.1.1.2.1.2	INTEGER	read-only	The physical interface type.
STR ifStaFirmwareRev	1.3.6.1.4.1.8059.1.2.2.1.1.1.2.1.3	NtnDisplayString	read-only	The interface firmware revision.
ifStaPortTable	1.3.6.1.4.1.8059.1.2.2.1.1.1.3		not-accessible	A list of interface port entries.
ifStaPortEntry	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1		not-accessible	An entry containing management information applicable to an interface.
INT ifStaPortSlotIndex	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.1	INTEGER	read-only	The physical slot number of the IPD chassis to which the interface module resides. The Mini/Micro DSLAM will have a slot index value of 1.
INT ifStaPortPortIndex	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.2	INTEGER	read-only	The physical port number of the interface.
STR ifStaPortFirmwareRev	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.3	NtnDisplayString	read-only	A textual string containing information about the port firmware revision.
INT ifStaPortLinkState	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.4	INTEGER	read-only	The value assigned to a port which designates the link status.
NUM ifStaPortRxWanNUCastUtil	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.5	NtnCounter32	read-only	The percent utilization for this port based on the received (Rx) WAN non unicast packet count. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifStaModStaPortReset.
NUM ifStaPortRxWanNUCastRate	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.6	NtnGauge32	read-only	An estimate of the interface's current Rx WAN non unicast bandwidth in Kilo bits per second.
NUM ifStaPortRxWanNUCastMaxRate	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.7	NtnGauge32	read-only	An estimate of the interface's maximum reported Rx WAN non unicast bandwidth in Kilo bits per second.
NUM ifStaPortRxWanNUCastAveRate	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.8	NtnGauge32	read-only	An estimate of the interface's average reported Rx WAN non unicast bandwidth in Kilo bits per second.
NUM ifStaPortTxWanNUCastUtil	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.9	NtnCounter32	read-only	The percent utilization for this port based on the transmitted (Tx) WAN non unicast packet count. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifStaModStaPortReset.
NUM ifStaPortTxWanNUCastRate	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.10	NtnGauge32	read-only	An estimate of the interface's current Tx WAN non unicast bandwidth in Kilo bits per second.
NUM ifStaPortTxWanNUCastMaxRate	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.11	NtnGauge32	read-only	An estimate of the interface's maximum reported Tx WAN non unicast bandwidth in Kilo bits per second.
NUM ifStaPortTxWanNUCastAveRate	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.12	NtnGauge32	read-only	An estimate of the interface's average reported Tx WAN non unicast bandwidth in Kilo bits per second.
NUM ifStaPortRxWanUCastUtil	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.13	NtnCounter32	read-only	The percent utilization for this port based on the received (Rx) WAN unicast packet count. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifStaModStaPortReset.
NUM ifStaPortRxWanUCastRate	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.14	NtnGauge32	read-only	An estimate of the interface's current Rx WAN unicast bandwidth in Kilo bits per second.
NUM ifStaPortRxWanUCastMaxRate	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.15	NtnGauge32	read-only	An estimate of the interface's maximum reported Rx WAN unicast bandwidth in Kilo bits per second.
NUM ifStaPortRxWanUCastAveRate	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.16	NtnGauge32	read-only	An estimate of the interface's average reported Rx WAN unicast bandwidth in Kilo bits per second.
NUM ifStaPortTxWanUCastUtil	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.17	NtnCounter32	read-only	The percent utilization for this port based on the transmitted (Tx) WAN unicast packet count. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifStaModStaPortReset.
NUM ifStaPortTxWanUCastRate	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.18	NtnGauge32	read-only	An estimate of the interface's current Tx WAN unicast bandwidth in Kilo bits per second.
NUM ifStaPortTxWanUCastMaxRate	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.19	NtnGauge32	read-only	An estimate of the interface's maximum reported Tx WAN unicast bandwidth in Kilo bits per second.
NUM ifStaPortTxWanUCastAveRate	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.20	NtnGauge32	read-only	An estimate of the interface's average reported Tx WAN unicast bandwidth in Kilo bits per second.
NUM ifStaPortTotRxWanPercentUtil	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.21	NtnCounter32	read-only	The total percent utilization for this port based on the transmitted (Rx) WAN unicast and non unicast packet count. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifStaModStaPortReset.
NUM ifStaPortTotRxWanRate	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.22	NtnGauge32	read-only	An estimate of the interface's current total Rx WAN unicast and non unicast bandwidth in Kilo bits per second.
NUM ifStaPortTotTxWanPercentUtil	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.23	NtnCounter32	read-only	The total percent utilization for this port based on the transmitted (Tx) WAN unicast and non unicast packet count. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifStaModStaPortReset.
NUM ifStaPortTotTxWanRate	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.24	NtnGauge32	read-only	An estimate of the interface's current total Tx WAN unicast and non unicast bandwidth in Kilo bits per second.
NTN ifStaPortTotUpTime	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.25	NtnTimeTicks	read-only	The value of sysUpTime at the time of the last creation or reset of an entry in the ifStaModStaPortTable.
NTN ifStaPortTotDwnTime	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.26	NtnTimeTicks	read-only	The value of sysDwnTime at the time of the last deletion or reset of an entry in the ifStaModStaPortTable.
NUM ifStaUCastTxPkt	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.27	NtnCounter32	read-only	The identifier which describes the transmitted (Tx) WAN unicast packet count. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifStaModStaPortReset.
NUM ifStaUCastRxPkt	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.28	NtnCounter32	read-only	The identifier which describes the received (Rx) WAN unicast packet count. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifStaModStaPortReset.
NUM ifStaNUCastTxPkt	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.29	NtnCounter32	read-only	The identifier which describes the transmitted (Tx) WAN non unicast packet count. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifStaModStaPortReset.
NUM ifStaNUCastRxPkt	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.30	NtnCounter32	read-only	The identifier which describes the received (Rx) WAN non unicast packet count. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifStaModStaPortReset.
INT ifStaNetworkLoopCount	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.31	INTEGER	read-only	The identifier which describes the network loop count.
ADR ifStaLastMacCausingLoop	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.32	NtnMacAddress	read-only	The identifier which describes the last MAC address that caused a network loop condition.
INT ifStaLastMacSrcPort	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.33	INTEGER	read-only	The identifier which describes the source port of the last MAC address.
INT ifStaLoopBondedGroupPortList	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.34	INTEGER	read-only	The bitmask of ports assigned to a loop bonded group.
INT ifStaLoopBondedGroupID	1.3.6.1.4.1.8059.1.2.2.1.1.1.3.1.35	INTEGER	read-only	The identifier of the loop bonded group.

RFC description

MIB for managing interface module statistics on Paradyne DSLAM access multiplexers and line cards.

Start monitoring Paradyne IPD12000/IPD4000/Mini-Micro DSLAM (interface module status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NTNTECH-INTERFACE-MODULE-STATUS-MIB

What Is NTNTECH-INTERFACE-MODULE-STATUS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description