NETGEAR-TIMERANGE-MIB

All MIBs › NETGEAR-TIMERANGE-MIB

Organization: Netgear Inc

Last Updated: 2011-01-26

Category: Switch Management

Description: Defines time-range schedule objects used by ACL and QoS policies on Netgear managed switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NETGEAR-TIMERANGE-MIB?

NETGEAR-TIMERANGE-MIB defines time-range schedule objects on Netgear managed switches, used to bind access-control lists (ACLs) and QoS policies to specific times of day or days of the week. It is a configuration-only MIB, exposing named time-range groups rather than performance counters or hardware sensors, used to confirm that scheduled policy enforcement (e.g., blocking a guest VLAN after hours) is correctly defined and active on the switch's control software. Its monitoring value lies in verifying the software configuration state of scheduled policies rather than hardware health, as administrators check that time ranges are properly defined so dependent ACL/QoS features engage and disengage as intended. It has a direct dependency relationship with the switch's ACL and QoS MIBs (including NETGEAR-QOS-MIB), since time ranges are referenced by, rather than independently useful from, those policy MIBs. It is typically deployed in campus or branch office Netgear switch environments implementing time-of-day network access policies. Engineers can download the NETGEAR-TIMERANGE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in NETGEAR-TIMERANGE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Netgear FastPath-based managed switch

Monitoring Examples

An engineer would poll the fastPathTimeRangeGroup to enumerate configured time-range names and their start/end schedules, confirming a range like business-hours is correctly defined for 08:00-18:00 weekdays. If an ACL bound to that time range unexpectedly blocks or allows traffic outside expected hours, checking fastPathTimeRangeGroup would reveal whether the schedule itself was misconfigured. Because no per-entry sample objects beyond the group node were provided, deeper time-range table structure is inferred from the module's stated purpose.

What Can Be Monitored

configured time-range schedule names
time-range start/end times
days-of-week applicability
linkage to ACL/QoS policies

Imported Objects

From QUANTA-LB6M-REF-MIB

lb6m	OBJECT-IDENTITY

From RFC1213-MIB

DisplayString

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
fastPathTimeRange	1.3.6.1.4.1.4526.10.53			The Netgear Private MIB for NETGEAR Time Ranges
fastPathTimeRangeGroup	1.3.6.1.4.1.4526.10.53.1
INT timeRangeAdminMode	1.3.6.1.4.1.4526.10.53.1.1	INTEGER	read-only	TimeRange admin mode: enable - enable TimeRange disable - disable TimeRange.
I32 timeRangeIndexNextFree	1.3.6.1.4.1.4526.10.53.1.2	Integer32	read-only	This object contains an unused value for the timeRangeIndex to be used when creating a new TimeRange. A value of zero indicates the TimeRange table is full.
timeRangeTable	1.3.6.1.4.1.4526.10.53.1.3		not-accessible	A table of TimeRange instances.
timeRangeEntry	1.3.6.1.4.1.4526.10.53.1.3.1		not-accessible	timeRangeIndex and timeRangeName must be set to complete a new timeRangeEntry instance
U32 timeRangeIndex	1.3.6.1.4.1.4526.10.53.1.3.1.1	Unsigned32	not-accessible	The TimeRange table index this instance is associated with.
STR timeRangeName	1.3.6.1.4.1.4526.10.53.1.3.1.2	DisplayString	read-create	The name of this TimeRange entry, which must consist of 1 to 31 alphanumeric characters and uniquely identify this TimeRange. This object must be set to complete a new TimeRange row instance.
INT timeRangeOperState	1.3.6.1.4.1.4526.10.53.1.3.1.3	INTEGER	read-only	Operating status of the time-range. It depends on the current time and the periodic and absolute time entries defined in the time-range
ROW timeRangeStatus	1.3.6.1.4.1.4526.10.53.1.3.1.4	RowStatus	read-create	Status of this instance. active(1) - this TimeRange instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
timeRangeAbsoluteEntryTable	1.3.6.1.4.1.4526.10.53.1.4		not-accessible	A table of absolute entries for time ranges
timeRangeAbsoluteEntry	1.3.6.1.4.1.4526.10.53.1.4.1		not-accessible	A table of absolute entries for time ranges. Atleast one of timeRangeAbsoluteStartDateAndTime and timeRangeAbsoluteEndDateAndTime must be set to complete a new Absolute entry instance.
I32 timeRangeAbsoluteEntryIndex	1.3.6.1.4.1.4526.10.53.1.4.1.1	Integer32	not-accessible	The index of this absolute time entry within time range.
TIM timeRangeAbsoluteStartDateAndTime	1.3.6.1.4.1.4526.10.53.1.4.1.2	TimeRangeAbsoluteDateAndTime	read-create	The start time for an absolute entry in the time range
TIM timeRangeAbsoluteEndDateAndTime	1.3.6.1.4.1.4526.10.53.1.4.1.3	TimeRangeAbsoluteDateAndTime	read-create	The end time for an absolute entry in the time range.
ROW timeRangeAbsoluteStatus	1.3.6.1.4.1.4526.10.53.1.4.1.4	RowStatus	read-create	Status of this instance. active(1) - this timeRangeAbsoluteEntry is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
timeRangePeriodicEntryTable	1.3.6.1.4.1.4526.10.53.1.5		not-accessible	A table periodic entries for time ranges
timeRangePeriodicEntry	1.3.6.1.4.1.4526.10.53.1.5.1		not-accessible	A table periodic entries for time ranges. All the objects in the periodic entry must be set to complete a new periodic entry instance. Objects timeRangePeriodicStartDay and timeRangePeriodicStartTime together forms the start dayandtime and objects timeRangePeriodicEndDay and timeRangePeriodicEndTime toghetehr forms end dayandtime. The time range to which the periodic entry belongs is active between start dayandtime and end dayandtime. If more than one day is specified in the timeRangePeriodicStartDay, then the same days should be specified in the timeRangePeriodicEndDay
I32 timeRangePeriodicEntryIndex	1.3.6.1.4.1.4526.10.53.1.5.1.1	Integer32	not-accessible	The index of this periodic entry within time range.
I32 timeRangePeriodicFrequency	1.3.6.1.4.1.4526.10.53.1.5.1.2	Integer32	read-create	The frequency of this periodic entry within the time range.
I32 timeRangePeriodicPattern	1.3.6.1.4.1.4526.10.53.1.5.1.3	Integer32	read-create	The pattern for a periodic entry in the time range. Can be one of the following: 0 - weekly, 1 - daily, 2 - monthly.
I32 timeRangePeriodicDayMask	1.3.6.1.4.1.4526.10.53.1.5.1.4	Integer32	read-create	Depending on the value of the timeRangeEntryPattern this field can have different meanings. In case timeRangeEntryPattern is set to 'daily' or 'weekly' the field contains a bitmap where each bit presents a day of week. Structure of the bitmap is the following : bit 0 - sunday, bit 1 - monday, bit 2 - tuesday, bit 3 - wednesday, bit 4 - thursday, bit 5 - friday, bit 6 - saturday. In case timeRangeEntryPattern is set to 'monthly' the field contains a day of month (1..31).
TIM timeRangePeriodicStartDate	1.3.6.1.4.1.4526.10.53.1.5.1.5	TimeRangePeriodicDate	read-create	The start date for a periodic entry in the time range
BIT timeRangePeriodicStartDay	1.3.6.1.4.1.4526.10.53.1.5.1.6	Bits	read-create	The starting day or days on which the configuration that referenced the time range starts going into effect. Same day can be set for both timeRangePeriodicStartDay and timeRangePeriodicEndDay objects
TIM timeRangePeriodicStartTime	1.3.6.1.4.1.4526.10.53.1.5.1.7	TimeRangePeriodicTime	read-create	The starting time for an periodic entry in the time range.
TIM timeRangePeriodicEndDate	1.3.6.1.4.1.4526.10.53.1.5.1.8	TimeRangePeriodicDate	read-create	The end date for a periodic entry in the time range
BIT timeRangePeriodicEndDay	1.3.6.1.4.1.4526.10.53.1.5.1.9	Bits	read-create	The ending day or days on which the configuration that referenced the time range is no longer in efect. Same day can be set for both timeRangePeriodicStartDay and timeRangePeriodicEndDay objects
TIM timeRangePeriodicEndTime	1.3.6.1.4.1.4526.10.53.1.5.1.10	TimeRangePeriodicTime	read-create	The end time for an periodic entry in the time range. Use end time 00:00 to specify last minute of the day.
ROW timeRangePeriodicStatus	1.3.6.1.4.1.4526.10.53.1.5.1.11	RowStatus	read-create	Status of this instance. active(1) - this timeRangePeriodicEntry is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance

RFC description

NETGEAR time range configuration for scheduling network policies and time-based access control rules.

Start monitoring Netgear managed switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NETGEAR-TIMERANGE-MIB

What Is NETGEAR-TIMERANGE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description