CYCLADES-ACS5K-CONF-MIB

All MIBs › CYCLADES-ACS5K-CONF-MIB

Organization: Avocent Corporation

Last Updated: 2010-07-26

Category: Switch Management

Description: Manages port and network configuration for the Avocent Cyclades ACS 5000 console server.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CYCLADES-ACS5K-CONF-MIB?

CYCLADES-ACS5K-CONF-MIB is a vendor MIB for the Avocent (Cyclades) ACS 5000 series console/terminal server, covering its configuration for network and console access. It exposes system identity settings (hostname, console banner, message of the day), Ethernet interface configuration including DHCP client mode, primary and secondary IPv4 addresses/masks, MTU, and IPv6 enablement/addressing method. It is used to monitor and verify the device's software-configured network identity and connectivity settings, which is important for confirming that a console server used for out-of-band management is reachable and correctly addressed, especially after a configuration change or failover to a secondary IP. It is a vendor-specific configuration MIB that typically sits alongside standard MIB-II system and interface objects for the device's operational counters. It is deployed in data centers and network operations environments where ACS 5000 console servers provide out-of-band serial/console access to other infrastructure. Engineers can download the CYCLADES-ACS5K-CONF-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CYCLADES-ACS5K-CONF-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Avocent Cyclades ACS 5000 console/terminal server

Monitoring Examples

An admin reads cyHostName, cyConsoleBanner, and cyMotd to confirm the device identifies itself correctly to users connecting for out-of-band access. Checking cyEthDhcpc alongside cyEthIPaddr/cyEthIPmask and the secondary cyEthIPaddr2/cyEthIPmask2 reveals whether the unit is using a static or DHCP-assigned address and whether a backup address is configured. Monitoring cyEnableIPv4, cyEnableIPv6, and cyIPv6Method after a network change helps confirm the intended IP protocol configuration took effect, catching a misconfiguration that could lock administrators out of console access.

What Can Be Monitored

hostname and console banner/MOTD
Ethernet DHCP client mode
primary and secondary IPv4 address/mask
MTU
IPv4/IPv6 enablement and IPv6 addressing method

Imported Objects

From CYCLADES-ACS5K-MIB

cyACS5KMgmt

MODULE-IDENTITY

From IF-MIB

InterfaceIndexOrZero

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
cyACS5KConf	1.3.6.1.4.1.2925.8.2			Configuration of ACS5000 products
STR cyHostName	1.3.6.1.4.1.2925.8.2.1	DisplayString	read-write	The Host Name
STR cyConsoleBanner	1.3.6.1.4.1.2925.8.2.2	DisplayString	read-write	The console banner
STR cyMotd	1.3.6.1.4.1.2925.8.2.3	DisplayString	read-write	The motd message
cyEthItf	1.3.6.1.4.1.2925.8.2.4			The configuration of the Ethernet Interface
INT cyEthDhcpc	1.3.6.1.4.1.2925.8.2.4.1	INTEGER	read-write	The ACS can request all of its ethernet parameters to a DHCP server
IP cyEthIPaddr	1.3.6.1.4.1.2925.8.2.4.2	IpAddress	read-write	This is the IP address of the Ethernet Interface
IP cyEthIPmask	1.3.6.1.4.1.2925.8.2.4.3	IpAddress	read-write	The mask fot the Ethernet network
I32 cyEthMTU	1.3.6.1.4.1.2925.8.2.4.4	Integer32	read-write	The Maximum Transmission Unit size, wich determines whether or not packets should be broken up
IP cyEthIPaddr2	1.3.6.1.4.1.2925.8.2.4.5	IpAddress	read-write	The Ethernet secondary IP address
IP cyEthIPmask2	1.3.6.1.4.1.2925.8.2.4.6	IpAddress	read-write	The Ethernet secondary IP mask
INT cyEnableIPv4	1.3.6.1.4.1.2925.8.2.4.7	INTEGER	read-write	This parameter is used to enable or disable the configuration of IPv4 addresses
INT cyEnableIPv6	1.3.6.1.4.1.2925.8.2.4.8	INTEGER	read-write	This parameter is used to enable or disable the configuration of IPv6 addresses
INT cyIPv6Method	1.3.6.1.4.1.2925.8.2.4.9	INTEGER	read-write	IPv6 configuration method
INT cyDHCPv6Opts	1.3.6.1.4.1.2925.8.2.4.10	INTEGER	read-write	DHCP options for IPv6
STR cyEthIPaddr6	1.3.6.1.4.1.2925.8.2.4.11	DisplayString	read-write	This is the IPv6 address of the Ethernet Interface
I32 cyEthPrefix6	1.3.6.1.4.1.2925.8.2.4.12	Integer32	read-write	IPv6 network prefix length of the Ethernet Interface
cyNameService	1.3.6.1.4.1.2925.8.2.5			The Name Service configuration
STR cyResolverOrder	1.3.6.1.4.1.2925.8.2.5.1	DisplayString	read-write	It specifies how host lookups are to be performed. Valid values : empty, 'hosts', 'bind', 'hosts, bind', 'bind, hosts'
STR cyMultipleIP	1.3.6.1.4.1.2925.8.2.5.2	DisplayString	read-write	Valid values are ON or OFF. If set to ON, the resolve library will return all valid addresses for a host that appears in the /etc/hosts file, instead of only the first.
cyDNSserv	1.3.6.1.4.1.2925.8.2.5.3			The DNS server configuration
STR cyDNSpriserv	1.3.6.1.4.1.2925.8.2.5.3.1	DisplayString	read-write	Internet Address (in dot notation) of primary name server that the resolver should query.
STR cyDNSsecserv	1.3.6.1.4.1.2925.8.2.5.3.2	DisplayString	read-write	Internet Address (in dot notation) of secondary name server that the resolver should query.
STR cyDNSdomain	1.3.6.1.4.1.2925.8.2.5.3.3	DisplayString	read-write	Local domain name .
cySerialPortConf	1.3.6.1.4.1.2925.8.2.6			The PortSlave configuration - pslave.conf file. It configures the all serial ports.
cySerialGlobal	1.3.6.1.4.1.2925.8.2.6.1			These parameters have the prefix conf. in the pslave.conf file
STR cySerialInclude	1.3.6.1.4.1.2925.8.2.6.1.1	DisplayString	read-write	File used in centralized management.
STR cySerialNFS	1.3.6.1.4.1.2925.8.2.6.1.2	DisplayString	read-write	Remote Network File System where data buffering will be written instead of the default directory '/var/run/DB'.
STR cySerialLockDir	1.3.6.1.4.1.2925.8.2.6.1.3	DisplayString	read-write	The lock directory for the ACS.
STR cySerialRlogin	1.3.6.1.4.1.2925.8.2.6.1.4	DisplayString	read-write	Location of the rlogin binary that accepts the -i flag.
STR cySerialPppd	1.3.6.1.4.1.2925.8.2.6.1.5	DisplayString	read-write	Location of the pppd binary.
STR cySerialTelnet	1.3.6.1.4.1.2925.8.2.6.1.6	DisplayString	read-write	Location of the telnet application
STR cySerialSsh	1.3.6.1.4.1.2925.8.2.6.1.7	DisplayString	read-write	Location of the ssh application
INT cySerialLocalLogins	1.3.6.1.4.1.2925.8.2.6.1.8	INTEGER	read-write	This parameter is only necessary when authentication is being performed for a port. This is useful if the Radius authentication server is down.
I32 cySerialFacility	1.3.6.1.4.1.2925.8.2.6.1.9	Integer32	read-write	This value (0-7) is the Local facility sent to the syslog daemon.
I32 cySerialDBFacility	1.3.6.1.4.1.2925.8.2.6.1.10	Integer32	read-write	This value (0-7) is the Local facility sent to the syslog daemon with the data when .
cySerialGroupTable	1.3.6.1.4.1.2925.8.2.6.1.11		not-accessible	This associates group name and its users
cygroupEntry	1.3.6.1.4.1.2925.8.2.6.1.11.1		not-accessible	One particular association between group name and its users
NUM cyGroupIndex	1.3.6.1.4.1.2925.8.2.6.1.11.1.1	InterfaceIndexOrZero	read-only	number to identifier the group
STR cyGroupName	1.3.6.1.4.1.2925.8.2.6.1.11.1.2	DisplayString	read-write	The Group Name
STR cyGroupUsers	1.3.6.1.4.1.2925.8.2.6.1.11.1.3	DisplayString	read-write	The users names
cySerialSpec	1.3.6.1.4.1.2925.8.2.6.2			These parameters have the prefix all. or sxx. in the pslave.conf file
cySerialPortTable	1.3.6.1.4.1.2925.8.2.6.2.1		not-accessible	This is the specific configuration to serial port
cysportEntry	1.3.6.1.4.1.2925.8.2.6.2.1.1		not-accessible	One particular serial port configuration
NUM cySPortNumber	1.3.6.1.4.1.2925.8.2.6.2.1.1.1	InterfaceIndexOrZero	read-only	number to identifier the serial port. Value 0 is ALL.
STR cySPortTty	1.3.6.1.4.1.2925.8.2.6.2.1.1.2	DisplayString	read-write	The device name for the serial port.
STR cySPortName	1.3.6.1.4.1.2925.8.2.6.2.1.1.3	DisplayString	read-write	Alias name given to the server connected to the serial port.
INT cySPortSpeed	1.3.6.1.4.1.2925.8.2.6.2.1.1.4	INTEGER	read-write	The speed for serial port.
I32 cySPortDataSize	1.3.6.1.4.1.2925.8.2.6.2.1.1.5	Integer32	read-write	The data size for serial port.
I32 cySPortStopBits	1.3.6.1.4.1.2925.8.2.6.2.1.1.6	Integer32	read-write	The number of stop bits for serial port.
STR cySPortParity	1.3.6.1.4.1.2925.8.2.6.2.1.1.7	DisplayString	read-write	The parity for serial port.
STR cySPortFlowCtrl	1.3.6.1.4.1.2925.8.2.6.2.1.1.8	DisplayString	read-write	The flow control for serial port.
I32 cySPortDTRdelay	1.3.6.1.4.1.2925.8.2.6.2.1.1.9	Integer32	read-write	This specifies how long (in miliseconds) a DTR signal will be turned off before it is turned on again.
INT cySPortDCDCtrl	1.3.6.1.4.1.2925.8.2.6.2.1.1.10	INTEGER	read-write	DCD signal controls the connection request.
INT cySPortLogUtmp	1.3.6.1.4.1.2925.8.2.6.2.1.1.11	INTEGER	read-write	ACS update the login records in /var/run/utmp file.
INT cySPortLogWtmp	1.3.6.1.4.1.2925.8.2.6.2.1.1.12	INTEGER	read-write	ACS update the login records in /var/run/wtmp file.
STR cySPortLogform	1.3.6.1.4.1.2925.8.2.6.2.1.1.13	DisplayString	read-write	This is the format to write login record.
STR cySPortAuthtype	1.3.6.1.4.1.2925.8.2.6.2.1.1.14	DisplayString	read-write	Authentication type : .
STR cySPortAuthSrv1	1.3.6.1.4.1.2925.8.2.6.2.1.1.15	DisplayString	read-write	IP address of the primary authentication server.
STR cySPortAccSrv1	1.3.6.1.4.1.2925.8.2.6.2.1.1.16	DisplayString	read-write	IP address of the primary accounting server.
I32 cySPortAuthTmo	1.3.6.1.4.1.2925.8.2.6.2.1.1.17	Integer32	read-write	This is the timeout (in seconds) for authentication query to be answered.
I32 cySPortAuthRetr	1.3.6.1.4.1.2925.8.2.6.2.1.1.18	Integer32	read-write	This defines the number of times each server is tried before another is contacted.
STR cySPortAuthSrv2	1.3.6.1.4.1.2925.8.2.6.2.1.1.19	DisplayString	read-write	IP address of the secondary authentication server.
STR cySPortAccSrv2	1.3.6.1.4.1.2925.8.2.6.2.1.1.20	DisplayString	read-write	IP address of the secondary accounting server.
STR cySPortAuthSecret	1.3.6.1.4.1.2925.8.2.6.2.1.1.21	DisplayString	read-write	This is the shared secret with authentciation servers.
INT cySPortAuthRadP	1.3.6.1.4.1.2925.8.2.6.2.1.1.22	INTEGER	read-write	To accept Radius' user without password.
STR cySPortAuthAcc	1.3.6.1.4.1.2925.8.2.6.2.1.1.23	DisplayString	read-write	access restrition on Users.
STR cySPortProtocol	1.3.6.1.4.1.2925.8.2.6.2.1.1.24	DisplayString	read-write	Defines the port serial's protocol.
STR cySPortRemoteIP	1.3.6.1.4.1.2925.8.2.6.2.1.1.25	DisplayString	read-write	This is the default IP address of the serial port.
STR cySPortSocketPort	1.3.6.1.4.1.2925.8.2.6.2.1.1.26	DisplayString	read-write	This defines an alternative labeling system for the serial port.
STR cySPortRemHost	1.3.6.1.4.1.2925.8.2.6.2.1.1.27	DisplayString	read-write	The IP address of the host to which the serial port will connect.
STR cySPortBanner	1.3.6.1.4.1.2925.8.2.6.2.1.1.28	DisplayString	read-write	This defines the banner.
STR cySPortPrompt	1.3.6.1.4.1.2925.8.2.6.2.1.1.29	DisplayString	read-write	This defines the login prompt to the serial port.
STR cySPortTermType	1.3.6.1.4.1.2925.8.2.6.2.1.1.30	DisplayString	read-write	This defines the terminal type.
STR cySPortAutomUsr	1.3.6.1.4.1.2925.8.2.6.2.1.1.31	DisplayString	read-write	This defines the automatic user.
IP cySPortNetMask	1.3.6.1.4.1.2925.8.2.6.2.1.1.32	IpAddress	read-write	The network mask used in dial in connection.
I32 cySPortPppMtu	1.3.6.1.4.1.2925.8.2.6.2.1.1.33	Integer32	read-write	The PPP MTU - dial in connection.
I32 cySPortPppMru	1.3.6.1.4.1.2925.8.2.6.2.1.1.34	Integer32	read-write	The PPP MRU - dial in connection.
STR cySPortPppOptions	1.3.6.1.4.1.2925.8.2.6.2.1.1.35	DisplayString	read-write	The PPP options when ACS autodetects the PPP session .
STR cySPortPppFoption	1.3.6.1.4.1.2925.8.2.6.2.1.1.36	DisplayString	read-write	The PPP forced options when the user has already been authenticated.
STR cySPortModemChat	1.3.6.1.4.1.2925.8.2.6.2.1.1.37	DisplayString	read-write	The initchat send to modem connected.
STR cySPortSttyCmd	1.3.6.1.4.1.2925.8.2.6.2.1.1.38	DisplayString	read-write	the tty settings after socket connection is established.
I32 cySPortSockTx	1.3.6.1.4.1.2925.8.2.6.2.1.1.39	Integer32	read-write	Defines the delay (in miliseconds) before transmission to the Ethernet of data received through a serial port .
I32 cySPortSockPoll	1.3.6.1.4.1.2925.8.2.6.2.1.1.40	Integer32	read-write	Keep-alive timer (miliseconds) to the TCP connection .
I32 cySPortSockIdle	1.3.6.1.4.1.2925.8.2.6.2.1.1.41	Integer32	read-write	The idle timeout in seconds .
I32 cySPortDBsize	1.3.6.1.4.1.2925.8.2.6.2.1.1.42	Integer32	read-write	Maximum size of the data buffering file.
INT cySPortDBtime	1.3.6.1.4.1.2925.8.2.6.2.1.1.43	INTEGER	read-write	Timestamp in data buffering.
STR cySPortDBmode	1.3.6.1.4.1.2925.8.2.6.2.1.1.44	DisplayString	read-write	Data buffering mode : circ or line
I32 cySPortDBsyslog	1.3.6.1.4.1.2925.8.2.6.2.1.1.45	Integer32	read-write	size of the data buffering send to syslog.
INT cySPortDBmenu	1.3.6.1.4.1.2925.8.2.6.2.1.1.46	INTEGER	read-write	Menu of the data buffering.
INT cySPortDBalarm	1.3.6.1.4.1.2925.8.2.6.2.1.1.47	INTEGER	read-write	Generating Alarms.
STR cySPortSSHbreak	1.3.6.1.4.1.2925.8.2.6.2.1.1.48	DisplayString	read-write	Break sequence - ssh session
STR cySPortSniffSess	1.3.6.1.4.1.2925.8.2.6.2.1.1.49	DisplayString	read-write	Sniff session type
STR cySPortSniffAdm	1.3.6.1.4.1.2925.8.2.6.2.1.1.50	DisplayString	read-write	List of admin users to sniff session
STR cySPortSniffEsc	1.3.6.1.4.1.2925.8.2.6.2.1.1.51	DisplayString	read-write	Escape sequence used in sniff session
STR cySPortSniffMsess	1.3.6.1.4.1.2925.8.2.6.2.1.1.52	DisplayString	read-write	Multiple sniff sessions
INT cySPortTelnetMode	1.3.6.1.4.1.2925.8.2.6.2.1.1.53	INTEGER	read-write	Mode negotiated by client telnet with the server
INT cySPortSysBufSess	1.3.6.1.4.1.2925.8.2.6.2.1.1.54	INTEGER	read-write	Syslog Buffering at all times
INT cySPortLFSuppress	1.3.6.1.4.1.2925.8.2.6.2.1.1.55	INTEGER	read-write	LF suppression in socket_server session
STR cySPortAutoInput	1.3.6.1.4.1.2925.8.2.6.2.1.1.56	DisplayString	read-write	This string is used to auto answer. It's the input string
STR cySPortAutoOutput	1.3.6.1.4.1.2925.8.2.6.2.1.1.57	DisplayString	read-write	This string is used to auto answer. It's the output string
STR cySPortPmType	1.3.6.1.4.1.2925.8.2.6.2.1.1.58	DisplayString	read-write	IPDU type, when the port protocol is configured as IPDU
STR cySPortPmUsers	1.3.6.1.4.1.2925.8.2.6.2.1.1.59	DisplayString	read-write	List of users which can access the IPDU and their respective outlets
STR cySPortPmOutlet	1.3.6.1.4.1.2925.8.2.6.2.1.1.60	DisplayString	read-write	List of . pairs, where the server is connected
STR cySPortPmKey	1.3.6.1.4.1.2925.8.2.6.2.1.1.61	DisplayString	read-write	Hotkey to grant access to the Power Management from a Telnet/SSH session
I32 cySPortPmNOutlets	1.3.6.1.4.1.2925.8.2.6.2.1.1.62	Integer32	read-write	Number of outlets of the IPDU
I32 cySPortBreakInterval	1.3.6.1.4.1.2925.8.2.6.2.1.1.63	Integer32	read-write	The break interval in miliseconds.
STR cySPortRemoteIP6	1.3.6.1.4.1.2925.8.2.6.2.1.1.64	DisplayString	read-write	This is the default IPv6 address of the serial port.
I32 cySPortPrefix6	1.3.6.1.4.1.2925.8.2.6.2.1.1.65	Integer32	read-write	Port IP address network prefix length.

RFC description

Configuration management for Avocent ACS 5000 serial access consoles and terminal servers.

Start monitoring Avocent Cyclades ACS 5000 console/terminal server (network config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CYCLADES-ACS5K-CONF-MIB

What Is CYCLADES-ACS5K-CONF-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description