NETGEAR-ME-MIB

All MIBs › NETGEAR-ME-MIB

Category: Switch Management

Description: Defines management extensions and enterprise-specific objects for Netgear ME series managed Ethernet switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NETGEAR-ME-MIB?

NETGEAR-ME-MIB defines Netgear's enterprise objects for managed devices; despite the module's name, the objects provided are focused on wireless access point management, covering AP identity, firmware, and remote-management/trap functions. It exposes AP inventory data (MAC address, firmware version, date/time, uptime), remote control actions (reset, factory reset, clear log, save configuration), password/admin settings, and SNMP trap-receiver configuration for the AP. Its monitoring role covers both hardware and software status: wirelessAPUpTime tracks AP availability, wirelessAPFWVer reports firmware version for patch-compliance checks, and wirelessAPDateTime confirms the AP's clock is correctly synchronized, all useful for confirming an access point is healthy and properly configured. As a Netgear proprietary module, it doesn't appear to formally import external standard MIBs, though it coexists with Netgear's broader enterprise MIB tree. It is deployed on Netgear wireless access points (and potentially ME-series managed devices with wireless management features) in small-to-medium business network deployments. Engineers can download the NETGEAR-ME-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in NETGEAR-ME-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Netgear wireless access point
Netgear ME-series managed device

Monitoring Examples

An administrator would poll wirelessAPUpTime and wirelessAPFWVer to confirm an access point is running and on the expected firmware version, flagging any device that needs a firmware upgrade. wirelessAPResetNow or wirelessAPResetToFactoryDefault could be invoked remotely to recover an unresponsive AP, while snmpTrapRcvIpAddress/snmpAPTrapRcvIpAddress configuration confirms where the AP is sending its SNMP traps, ensuring alerts reach the correct management station.

What Can Be Monitored

AP uptime
AP firmware version
AP date/time sync
trap receiver configuration
admin password/reset controls

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

IpAddress
enterprises

From RFC1213-MIB

DisplayString
PhysAddress

From SNMPv2-SMI

Counter32

OIDs

OID symbolic	OID numeric	Type	Access	Description
netgear	1.3.6.1.4.1.4526
wirelessProducts	1.3.6.1.4.1.4526.4
wirelessAccessPointDev	1.3.6.1.4.1.4526.4.1
wirelessAPSystemGroup	1.3.6.1.4.1.4526.4.1.1
PHY wirelessAPMacAddr	1.3.6.1.4.1.4526.4.1.1.1	PhysAddress	read-only	Access Point MAC address, It will be like '00c002003009'
STR wirelessAPFWVer	1.3.6.1.4.1.4526.4.1.1.2	DisplayString	read-only	Access Point firmware version, It will be like 'Version 2.0 Release 08'
STR wirelessAPDateTime	1.3.6.1.4.1.4526.4.1.1.3	DisplayString	read-only	The date and time, with optional timezone information. It will be like '2003-04-03 02:50:54 GMT'
TIK wirelessAPUpTime	1.3.6.1.4.1.4526.4.1.1.4	TimeTicks	read-only	The time (in hundredths of a second) since the network management portion of the system was last re-initialized. It will like '11223533' in the unit of 1/100second. This object value is the same as MIB-II sysUpTime object
INT wirelessAPResetNow	1.3.6.1.4.1.4526.4.1.1.5	INTEGER	read-write	Setting this object to true(1) causes the device to reset. Reading this object always returns false(2).
INT wirelessAPResetToFactoryDefault	1.3.6.1.4.1.4526.4.1.1.6	INTEGER	read-write	Setting this object to true(1) causes the device to reset to factory default value. Reading this object always returns false(2).
STR wirelessAPPassword	1.3.6.1.4.1.4526.4.1.1.7	DisplayString	read-write	Get/Set the password
INT wirelessAPClearLog	1.3.6.1.4.1.4526.4.1.1.8	INTEGER	read-write	Setting this value clear(1) causes the AP to clear the log data, Reading this walue always return not-clear(0).
INT wirelessAPSaveConfiguration	1.3.6.1.4.1.4526.4.1.1.9	INTEGER	read-write	Setting this value save(1) causes the settings changed by SNMP to be stored forever but in memory, Reading this walue always return save(0).
INT snmpTrapVersion	1.3.6.1.4.1.4526.4.1.1.10	INTEGER	read-write
INT snmpTrapRcvIpType	1.3.6.1.4.1.4526.4.1.1.11	INTEGER	read-write
IP snmpAPTrapRcvIpAddress	1.3.6.1.4.1.4526.4.1.1.12	IpAddress	read-write
INT snmpAPSNMPEnable	1.3.6.1.4.1.4526.4.1.1.13	INTEGER	read-write
STR snmpAPCommunity	1.3.6.1.4.1.4526.4.1.1.14	DisplayString	read-write
INT snmpAPAccessRight	1.3.6.1.4.1.4526.4.1.1.15	INTEGER	read-write
INT snmpAPManagersType	1.3.6.1.4.1.4526.4.1.1.16	INTEGER	read-write
IP snmpAPSpecificStationIp	1.3.6.1.4.1.4526.4.1.1.17	IpAddress	read-write
INT snmpAPTrapEnable	1.3.6.1.4.1.4526.4.1.1.18	INTEGER	read-write
wirelessAPConnectedStationGroup	1.3.6.1.4.1.4526.4.1.2
INT wirelessAPConnectedStationTableRefresh	1.3.6.1.4.1.4526.4.1.2.1	INTEGER	read-write	Setting this value to refresh(1), the wireless AP will start the conntected Station Table refresh progress. Reading this vlaue always return not-refresh(1)
wirelessAPConnectedStation	1.3.6.1.4.1.4526.4.1.2.2
wirelessAPConnectedStationTable	1.3.6.1.4.1.4526.4.1.2.2.1		not-accessible	Wireless AP Connected Station Table Object
wirelessAPConnectedStationEntry	1.3.6.1.4.1.4526.4.1.2.2.1.1		not-accessible	An entry containing information for Wireless AP Connected Station Table
PHY wirelessAPConnectedStationMacAddr	1.3.6.1.4.1.4526.4.1.2.2.1.1.2	PhysAddress	read-only	Wireless Connected Station Mac Address
INT wirelessAPConnectedStationStatus	1.3.6.1.4.1.4526.4.1.2.2.1.1.3	INTEGER	read-only	Wireless Connected Station Status
INT wirelessAPControl	1.3.6.1.4.1.4526.4.1.2.3	INTEGER	read-write	Wireless Access Point Control
wirelessAPControlList	1.3.6.1.4.1.4526.4.1.2.4
wirelessAPControlListTable	1.3.6.1.4.1.4526.4.1.2.4.1		not-accessible	Wireless Access Point Control List Table Object
wirelessAPControlListEntry	1.3.6.1.4.1.4526.4.1.2.4.1.1		not-accessible	An entry containing information for Wireless Access Point Control List Table Object
PHY wirelessAPControlListMacAddr	1.3.6.1.4.1.4526.4.1.2.4.1.1.2	PhysAddress	read-write	Wireless Access Point Control List Mac Address
wirelessAPCtlOperate	1.3.6.1.4.1.4526.4.1.2.5
PHY wirelessAPAddCtlMacAddr	1.3.6.1.4.1.4526.4.1.2.5.1	PhysAddress	read-write	The added entry's Physical Address, Reading this object always return '000000000000'
PHY wirelessAPDelCtlMacAddr	1.3.6.1.4.1.4526.4.1.2.5.2	PhysAddress	read-write	The deleted entry's Physical Address, Reading this object always return '000000000000'
wirelessAPIfTrafficGroup	1.3.6.1.4.1.4526.4.1.3
wirelessAPIfWiredTrafficGroup	1.3.6.1.4.1.4526.4.1.3.1
C32 wirelessAPIfWiredTotalOctetsIn	1.3.6.1.4.1.4526.4.1.3.1.1	Counter32	read-only	Traffic received by the wireless AP via Ethernet in octets
C32 wirelessAPIfWiredTotalOctetsOut	1.3.6.1.4.1.4526.4.1.3.1.2	Counter32	read-only	Traffic transmitted by the wireless AP via Ethernet in octets
C32 wirelessAPIfWiredPacketsIn	1.3.6.1.4.1.4526.4.1.3.1.3	Counter32	read-only	Traffic received by the wireless AP via Ethernet in packets
C32 wirelessAPIfWiredPacketsOut	1.3.6.1.4.1.4526.4.1.3.1.4	Counter32	read-only	Traffic transmitted by the wireless AP via Ethernet in packets.
C32 wirelessAPIfWiredThroughputIn	1.3.6.1.4.1.4526.4.1.3.1.5	Counter32	read-only	Throughput-in at Ethernet by the wireless AP in the unit of B/s
C32 wirelessAPIfWiredThroughputOut	1.3.6.1.4.1.4526.4.1.3.1.6	Counter32	read-only	Throughput-out at Ethernet by the wireless AP in the unit of B/s
C32 wirelessAPIfWiredErrorsIn	1.3.6.1.4.1.4526.4.1.3.1.7	Counter32	read-only	CRC errors in in-traffic occurs at Ethernet by the wireless AP
C32 wirelessAPIfWiredErrorsOut	1.3.6.1.4.1.4526.4.1.3.1.8	Counter32	read-only	CRC errors in out-traffic occurs at Ethernet by the wireless AP
INT wirelessAPIfWiredTrafficResetCounter	1.3.6.1.4.1.4526.4.1.3.1.9	INTEGER	read-write	Reset the Etherenet interface both Octets In and Out counters
wirelessAPIfWlanTrafficGroup	1.3.6.1.4.1.4526.4.1.3.2
C32 wirelessAPIfWLANTotalOctetsIn	1.3.6.1.4.1.4526.4.1.3.2.1	Counter32	read-only	Traffic received via WLAN by the wireless AP in octets
C32 wirelessAPIfWLANTotalOctetsOut	1.3.6.1.4.1.4526.4.1.3.2.2	Counter32	read-only	Traffic transmitted via WLAN by the wireless AP in octets
C32 wirelessAPIfWLANUnicastPacketsIn	1.3.6.1.4.1.4526.4.1.3.2.3	Counter32	read-only	Unicast traffic received via WLAN by the wireless AP in packets
C32 wirelessAPIfWLANUnicastPacketsOut	1.3.6.1.4.1.4526.4.1.3.2.4	Counter32	read-only	Unicast traffic transmitted via WLAN by the wireless AP in packets
C32 wirelessAPIfWLANBroadcastPacketsIn	1.3.6.1.4.1.4526.4.1.3.2.5	Counter32	read-only	Broadcast traffic received via WLAN by the wireless AP in packets
C32 wirelessAPIfWLANBroadcastPacketsOut	1.3.6.1.4.1.4526.4.1.3.2.6	Counter32	read-only	Broadcast traffic transmitted via WLAN by the wireless AP in packets
C32 wirelessAPIfWLANMulticastPacketsIn	1.3.6.1.4.1.4526.4.1.3.2.7	Counter32	read-only	Multicast traffic received via WLAN by the wireless AP in packets
C32 wirelessAPIfWLANMulticastPacketsOut	1.3.6.1.4.1.4526.4.1.3.2.8	Counter32	read-only	Multicast traffic transmitted via WLAN by the wireless AP in packets
C32 wirelessAPIfWLANThroughputIn	1.3.6.1.4.1.4526.4.1.3.2.9	Counter32	read-only	Throughtput-in at WLAN transmitted by the wireless AP in the unit of B/s
C32 wirelessAPIfWLANThroughputOut	1.3.6.1.4.1.4526.4.1.3.2.10	Counter32	read-only	Throughtput-out at WLAN transmitted by the wireless AP in the unit of B/s
C32 wirelessAPIfWLANPacketsIn	1.3.6.1.4.1.4526.4.1.3.2.11	Counter32	read-only	Total in-packets at WLAN received by the wireless AP in packets
C32 wirelessAPIfWLANPacketsOut	1.3.6.1.4.1.4526.4.1.3.2.12	Counter32	read-only	Total out-packets at WLAN transmitted by the wireless AP in packets
INT wirelessAPIfWLANTrafficResetCounter	1.3.6.1.4.1.4526.4.1.3.2.13	INTEGER	read-write	Reset the WLAN interface 's counters, they will start from 0 again.
wirelessAPIfSettingsGroup	1.3.6.1.4.1.4526.4.1.4
INT wirelessAPDHCPClientObtainIPchoice	1.3.6.1.4.1.4526.4.1.4.1	INTEGER	read-write	Wireless Access Point DHCP Client Obtain an IP address choice static(0) means use static IP addess; automatic(1) means obtain an IP address automatically from DHCP server
IP wirelessAPDHCPClientIPaddr	1.3.6.1.4.1.4526.4.1.4.2	IpAddress	read-only	Wireless Access Point DHCP Client IP address If wirelessAPDHCPClientObtainIPchoice is set to static(0), then it should be the same as wirelessAPDHCPClientStaticIPaddr.
IP wirelessAPDHCPClientIPsubnetMask	1.3.6.1.4.1.4526.4.1.4.3	IpAddress	read-only	Wireless Access Point DHCP Client IP subnet mask If wirelessAPDHCPClientObtainIPchoice is set to static(0), then it should be the same as wirelessAPDHCPClientStaticIPsubnetMask.
IP wirelessAPDHCPClientGateway	1.3.6.1.4.1.4526.4.1.4.4	IpAddress	read-only	Wireless Access Point DHCP Client gateway If wirelessAPDHCPClientObtainIPchoice is set to static(0), then it should be the same as wirelessAPDHCPClientStaticGateway.
IP wirelessAPDHCPClientPriDNS	1.3.6.1.4.1.4526.4.1.4.5	IpAddress	read-only	Wireless Access Point DHCP Client primary DNS If wirelessAPDHCPClientObtainIPchoice is set to static(0), then it should be the same as wirelessAPDHCPClientStaticPriDNS.
IP wirelessAPDHCPClientSecDNS	1.3.6.1.4.1.4526.4.1.4.6	IpAddress	read-only	Wireless Access Point DHCP Client secondary DNS If wirelessAPDHCPClientObtainIPchoice is set to static(0), then it should be the same as wirelessAPDHCPClientStaticSecDNS.
IP wirelessAPDHCPClientStaticIPaddr	1.3.6.1.4.1.4526.4.1.4.7	IpAddress	read-write	Wireless Access Point DHCP Client static IP address If wirelessAPDHCPClientObtainIPchoice is set to automatic (1), then it should be 0.0.0.0.
IP wirelessAPDHCPClientStaticIPsubnetMask	1.3.6.1.4.1.4526.4.1.4.8	IpAddress	read-write	Wireless Access Point DHCP Client static IP subnet mask If wirelessAPDHCPClientObtainIPchoice is set to automatic (1), then it should be 0.0.0.0.
IP wirelessAPDHCPClientStaticGateway	1.3.6.1.4.1.4526.4.1.4.9	IpAddress	read-write	Wireless Access Point DHCP Client static gateway If wirelessAPDHCPClientObtainIPchoice is set to automatic (1), then it should be 0.0.0.0.
IP wirelessAPDHCPClientStaticPriDNS	1.3.6.1.4.1.4526.4.1.4.10	IpAddress	read-write	Wireless Access Point DHCP Client static primary DNS If wirelessAPDHCPClientObtainIPchoice is set to automatic (1), then it should be 0.0.0.0.
IP wirelessAPDHCPClientStaticSecDNS	1.3.6.1.4.1.4526.4.1.4.11	IpAddress	read-write	Wireless Access Point DHCP Client static secondary DNS If wirelessAPDHCPClientObtainIPchoice is set to automatic (1), then it should be 0.0.0.0.
STR wirelessAPName	1.3.6.1.4.1.4526.4.1.4.12	DisplayString	read-write	Wireless Access Point Name
INT wirelessAPWINSchoice	1.3.6.1.4.1.4526.4.1.4.13	INTEGER	read-write	Wireless Access Point WINS choice If it is set to disAbled, then not using WINS.
STR wirelessAPWINSServerName	1.3.6.1.4.1.4526.4.1.4.14	DisplayString	read-write	WINS Server Name If wirelessAPWINSchoice is enAbled, either set this object If wirelessAPWINSchoice is disAbled, this object value should be cleared
wirelessAPWirelessSettingsGroup	1.3.6.1.4.1.4526.4.1.5
INT wirelessAPCountryDomain	1.3.6.1.4.1.4526.4.1.5.1	INTEGER	read-write	Wireless Access Point Country Domain
INT wirelessAPChannelNo	1.3.6.1.4.1.4526.4.1.5.2	INTEGER	read-write	Wireless Access Point Channel No Auto(0) default
STR wirelessAPSSID	1.3.6.1.4.1.4526.4.1.5.3	DisplayString	read-write	Wireless Access Point SSID This object value should be the same as IEEE 802.11 MIB dot11DesiredSSID
STR wirelessAPPassphrase	1.3.6.1.4.1.4526.4.1.5.7	DisplayString	read-write	Wireless AP Passphrase This object won't be allowed to write unless wirelessAPWEPEnabled is enAbled
INT wirelessAPGenerateKeysEnabled	1.3.6.1.4.1.4526.4.1.5.8	INTEGER	read-write	Wireless Access Point Generate Keys This object won't be allowed to write unless wirelessAPWEPEnabled is enAbled
wirelessAPKeysSet	1.3.6.1.4.1.4526.4.1.5.9
wirelessAPKeysSetTable	1.3.6.1.4.1.4526.4.1.5.9.1		not-accessible	Wireless Access Point Keys Set Table Object This object won't be allowed to write unless wirelessAPWEPEnabled is enAbled
wirelessAPKeysSetEntry	1.3.6.1.4.1.4526.4.1.5.9.1.1		not-accessible	An entry containing information for Wireless Access Point Keys Set Table
INT wirelessAPKeysSetEnabled	1.3.6.1.4.1.4526.4.1.5.9.1.1.2	INTEGER	read-write	Enabled or Disabled a Wireless Access Point Key This object won't be allowed to write unless wirelessAPWEPEnabled is enAbled We only allow one key set will be enabled
OCT wirelessAPKeys	1.3.6.1.4.1.4526.4.1.5.9.1.1.3	OCTET STRING	read-write	Wireless AP Key This object won't be allowed to write unless wirelessAPWEPEnabled is enAbled
INT wirelessAPBasicRateChoice	1.3.6.1.4.1.4526.4.1.5.10	INTEGER	read-write	Wireless AP Basic Rate selection: auto(0) means Auto-negotiate and fixed(1) means Fixed rate
wirelessAPFixedRate	1.3.6.1.4.1.4526.4.1.5.11
INT wirelessAPFixedRate1	1.3.6.1.4.1.4526.4.1.5.11.1	INTEGER	read-write	If wirelessAPBasicRateChoice is set to auto(0), then the value in this object should be empty. oneM means 1Mbps, twoM means 2Mbps, fiveDotfiveM means 5.5Mbps, elevenM means 11Mbps This object won't be allowed to write unless wirelessAPBasicRateChoice is set to fixed(1)
INT wirelessAPFixedRate2	1.3.6.1.4.1.4526.4.1.5.11.2	INTEGER	read-write	If wirelessAPBasicRateChoice is set to auto(0), then the value in this object should be empty. oneM means 1Mbps, twoM means 2Mbps, fiveDotfiveM means 5.5Mbps, elevenM means 11Mbps This object won't be allowed to write unless wirelessAPBasicRateChoice is set to fixed(1)
INT wirelessAPFixedRate5_5	1.3.6.1.4.1.4526.4.1.5.11.3	INTEGER	read-write	If wirelessAPBasicRateChoice is set to auto(0), then the value in this object should be empty. oneM means 1Mbps, twoM means 2Mbps, fiveDotfiveM means 5.5Mbps, elevenM means 11Mbps This object won't be allowed to write unless wirelessAPBasicRateChoice is set to fixed(1)
INT wirelessAPFixedRate11	1.3.6.1.4.1.4526.4.1.5.11.4	INTEGER	read-write	If wirelessAPBasicRateChoice is set to auto(0), then the value in this object should be empty. oneM means 1Mbps, twoM means 2Mbps, fiveDotfiveM means 5.5Mbps, elevenM means 11Mbps This object won't be allowed to write unless wirelessAPBasicRateChoice is set to fixed(1)
INT wirelessAPRTSThreshold	1.3.6.1.4.1.4526.4.1.5.12	INTEGER	read-write	The value in this object should be the same as IEEE 802.11 dot11RTSThreshold
INT wirelessAPFragmentationThreshold	1.3.6.1.4.1.4526.4.1.5.13	INTEGER	read-write	The value in this object should be the same as IEEE 802.11 dot11FragmentationThreshold
INT wirelessAPBeaconPeriod	1.3.6.1.4.1.4526.4.1.5.14	INTEGER	read-write	The value in this object should be the same as IEEE 802.11 dot11BeaconPeriod
INT wirelessAPShortPreambleOptionImplemented	1.3.6.1.4.1.4526.4.1.5.15	INTEGER	read-write	The value of this object is 0 denoting that the short preamble used, 1 denoting that the long preamble used.
INT wirelessAPAntennaSelection	1.3.6.1.4.1.4526.4.1.5.16	INTEGER	read-write	Antenna Selection
INT wirelessAPMaximumTransmitPowerLevel	1.3.6.1.4.1.4526.4.1.5.17	INTEGER	read-write	The value in this object should be the same as IEEE 802.11 dot11MaximumTransmitPowerLevel. However, our default value will be 18dbm. copy from IEEE 802.11 MIB: This attribute shall indicate the maximum transmit power, in dBm, allowed in the subband for the associated domain country string. The default value of this attribute shall be zero.
INT wirelessAPOperatingMode	1.3.6.1.4.1.4526.4.1.5.18	INTEGER	read-write	Operating Mode
INT wirelessAPSSIDEnabled	1.3.6.1.4.1.4526.4.1.5.19	INTEGER	read-write	Enabled or disabled Wireless Access Point Broadcast Wireless Network Name SSID
wirelessAPSecuritySettingsGroup	1.3.6.1.4.1.4526.4.1.6
INT wirelessAP802dot1xSecurityEnabled	1.3.6.1.4.1.4526.4.1.6.1	INTEGER	read-write	802.1x Security enabled or disabled
INT wirelessAPEAPauthType	1.3.6.1.4.1.4526.4.1.6.2	INTEGER	read-write	Operating Mode This object won't be allowed to write unless wirelessAP802dot1xSecurityEnabled is enAbled
STR wirelessAPRadiusServer	1.3.6.1.4.1.4526.4.1.6.3	DisplayString	read-write	Radius Server Name/IP Address
INT wirelessAPRadiusPort	1.3.6.1.4.1.4526.4.1.6.4	INTEGER	read-write	Radius Port
STR wirelessAPSharedKey	1.3.6.1.4.1.4526.4.1.6.5	DisplayString	read-write	Radius Server Shared Key
STR wirelessAPRadiusServer2	1.3.6.1.4.1.4526.4.1.6.7	DisplayString	read-write	Radius Server Name/IP Address
INT wirelessAPRadAccountPort	1.3.6.1.4.1.4526.4.1.6.11	INTEGER	read-write	Radius Accounting Port
INT wirelessAPKeyExchange	1.3.6.1.4.1.4526.4.1.6.16	INTEGER	read-write	AP Key Exchange enabled or disabled
INT wirelessAPKeyExchangeKeylife	1.3.6.1.4.1.4526.4.1.6.17	INTEGER	read-write	AP exchanged key lifetime
INT wirelessAPRadAccountEnable	1.3.6.1.4.1.4526.4.1.6.18	INTEGER	read-write	AP Radius Accounting enabled or disabled
INT wirelessAPMacAuthEnable	1.3.6.1.4.1.4526.4.1.6.19	INTEGER	read-write	AP Mac Authentication enabled or disabled
INT wirelessAPRadAccountUpdateEnable	1.3.6.1.4.1.4526.4.1.6.21	INTEGER	read-write	AP Radius Account Update enabled or disabled
INT wirelessAPRadAccountUpdatePeriod	1.3.6.1.4.1.4526.4.1.6.22	INTEGER	read-write	AP Radius Account Update Period
INT wirelessAPRadAccountIdlePeriod	1.3.6.1.4.1.4526.4.1.6.23	INTEGER	read-write	Idle timer for AP not receiving any traffic from a wireless station to perform a dissociation
INT wirelessTIOperateMode	1.3.6.1.4.1.4526.4.1.6.25	INTEGER	read-write	AP Operation Mode
PHY wirelessTIDstMac	1.3.6.1.4.1.4526.4.1.6.26	PhysAddress	read-write	The Destination Address When one operation mode is selected which the remote address necessary.
INT wirelessTIIsolation	1.3.6.1.4.1.4526.4.1.6.28	INTEGER	read-write	AP Wireless Separation Setting
INT wirelessTIEnable80211d	1.3.6.1.4.1.4526.4.1.6.29	INTEGER	read-write	AP Worldwide Mode Setting
INT wirelessAPSecurityMode	1.3.6.1.4.1.4526.4.1.6.37	INTEGER	read-write	AP Security Mode Setting, can take the place of AP Authentication and Encryption Setting Logic Relation.

RFC description

Netgear wireless access point MIB; provides system, connected station, traffic, and security configuration monitoring for 802.11 APs.

Start monitoring Netgear wireless access point / ME-series managed device with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NETGEAR-ME-MIB

What Is NETGEAR-ME-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description