NETGEAR-ME-MIB :: snmpAPSNMPEnable

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › NETGEAR-ME-MIB › snmpAPSNMPEnable

snmpAPSNMPEnable

Module: NETGEAR-ME-MIB

OID (symbolic): NETGEAR-ME-MIB::snmpAPSNMPEnable

OID (numeric): 1.3.6.1.4.1.4526.4.1.1.13

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description:

What is snmpAPSNMPEnable?

Turns SNMP management access to the AP on or off. An admin disables this to lock down an AP against any SNMP-based configuration once initial setup is complete, or enables it temporarily for a maintenance task.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.4.1.1.13
snmpwalk -v2c -c public <target> NETGEAR-ME-MIB::snmpAPSNMPEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.4.1.1.13.1
snmpget -v2c -c public <target> NETGEAR-ME-MIB::snmpAPSNMPEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4526.4.1.1.13.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> snmpAPSNMPEnable.1

Start monitoring Netgear wireless access point / ME-series managed device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETGEAR-ME-MIB::snmpAPSNMPEnable OID value, configure state conditions and alerts, and monitor any Netgear wireless access point / ME-series managed device from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4526netgearFSM726S-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4526.4wirelessProductsNETGEAR-ME-MIB
1.3.6.1.4.1.4526.4.1wirelessAccessPointDevNETGEAR-ME-MIB
1.3.6.1.4.1.4526.4.1.1wirelessAPSystemGroupNETGEAR-ME-MIB
1.3.6.1.4.1.4526.4.1.1.13snmpAPSNMPEnableNETGEAR-ME-MIB