All MIBs › NETGEAR-ME-MIB › wirelessAPClearLog

wirelessAPClearLog

OID (symbolic): NETGEAR-ME-MIB::wirelessAPClearLog

OID (numeric): 1.3.6.1.4.1.4526.4.1.1.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Setting this value clear(1) causes the AP to clear the log data, Reading this walue always return not-clear(0).

What is wirelessAPClearLog?

Setting this to 'clear(1)' wipes the AP's internal log data; reading it always reports the not-clear state. An admin uses this to reset the log before starting a fresh troubleshooting session, so new events are easier to spot.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.4.1.1.8
snmpwalk -v2c -c public <target> NETGEAR-ME-MIB::wirelessAPClearLog

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.4.1.1.8.1
snmpget -v2c -c public <target> NETGEAR-ME-MIB::wirelessAPClearLog.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4526.4.1.1.8.1 i <value>

Start monitoring Netgear wireless access point / ME-series managed device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETGEAR-ME-MIB::wirelessAPClearLog OID value, configure state conditions and alerts, and monitor any Netgear wireless access point / ME-series managed device from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.4526	netgear	FSM726S-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.4526.4	wirelessProducts	NETGEAR-ME-MIB
1.3.6.1.4.1.4526.4.1	wirelessAccessPointDev	NETGEAR-ME-MIB
1.3.6.1.4.1.4526.4.1.1	wirelessAPSystemGroup	NETGEAR-ME-MIB
1.3.6.1.4.1.4526.4.1.1.8	wirelessAPClearLog	NETGEAR-ME-MIB

NETGEAR-ME-MIB :: wirelessAPClearLog

wirelessAPClearLog

Module

This MIB depends on