All MIBs › MY-PRIVATE-VLAN-MIB › mypvlanPromPortSecondaryRemap2k
mypvlanPromPortSecondaryRemap2k
Module: MY-PRIVATE-VLAN-MIB
OID (symbolic): MY-PRIVATE-VLAN-MIB::mypvlanPromPortSecondaryRemap2k
OID (numeric): 1.3.6.1.4.1.171.10.97.2.44.1.2.2.1.3
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: A string of octets containing one bit per VLAN for VLANs with VlanIndexOrZero values of 1024 through 2047 in the management domain on this port. The first octet corresponds to VLANs with VlanIndexOrZero values of 1024 through 1031; the second octet to VLANs 1032 through 1039; etc. The most significant bit of each octet corresponds to the lowest value VlanIndexOrZero in that octet.
A bit can only be set to '1' when the bit is corresponding to a VLAN of Private VLAN isolated or community type which has already been associated with a primary VLAN.
Note that if the length of this string is less than 128 octets, any 'missing' octets are assumed to contain the value zero. An NMS may omit any zero-valued octets from the end of this string in order to reduce SetPDU size, and the agent may also omit zero-valued trailing octets, to reduce the size of GetResponse PDUs.
This object is only instantiated on devices which support the range of VlanIndexOrZero up to 4095.
What is mypvlanPromPortSecondaryRemap2k?
This read-write bitmap is the companion to mypvlanPromPortSecondaryRemap, covering VLAN IDs 1024 through 2047, marking which secondary VLANs in that range are enabled for remapping on this promiscuous port. Like its sibling, a bit can only be set for a VLAN already configured as isolated or community type with a primary VLAN association, and this object is only instantiated on devices supporting VLAN IDs up to 4095. Setting the bit for VLAN 1500 in mypvlanPromPortSecondaryRemap2k would enable that higher-numbered secondary VLAN to be remapped through this promiscuous port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.10.97.2.44.1.2.2.1.3 snmpwalk -v2c -c public <target> MY-PRIVATE-VLAN-MIB::mypvlanPromPortSecondaryRemap2k
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.10.97.2.44.1.2.2.1.3.1 snmpget -v2c -c public <target> MY-PRIVATE-VLAN-MIB::mypvlanPromPortSecondaryRemap2k.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.171.10.97.2.44.1.2.2.1.3.1 s <value>
Start monitoring D-Link managed switch (Private VLAN feature) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MY-PRIVATE-VLAN-MIB::mypvlanPromPortSecondaryRemap2k OID value, configure state conditions and alerts, and monitor any D-Link managed switch (Private VLAN feature) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.10 | dlink_products | DES-1226G-MIB |
| 1.3.6.1.4.1.171.10.97 | switchMib | MY-SMI |
| 1.3.6.1.4.1.171.10.97.2 | myMgmt | MY-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.10.97.2.44 | myPrivateVlanMIB | MY-PRIVATE-VLAN-MIB |
| 1.3.6.1.4.1.171.10.97.2.44.1 | mypvlanMIBObjects | MY-PRIVATE-VLAN-MIB |
| 1.3.6.1.4.1.171.10.97.2.44.1.2 | mypvlanPortObjects | MY-PRIVATE-VLAN-MIB |
| 1.3.6.1.4.1.171.10.97.2.44.1.2.2 | mypvlanPromPortTable | MY-PRIVATE-VLAN-MIB |
| 1.3.6.1.4.1.171.10.97.2.44.1.2.2.1 | mypvlanPromPortEntry | MY-PRIVATE-VLAN-MIB |
| 1.3.6.1.4.1.171.10.97.2.44.1.2.2.1.3 | mypvlanPromPortSecondaryRemap2k | MY-PRIVATE-VLAN-MIB |