All MIBs › MICOM-FRDCE-MIB
Category: Frame Relay
Description: Monitors Frame Relay DCE interface statistics and network performance on Micom equipment.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is MICOM-FRDCE-MIB?
MICOM-FRDCE-MIB is a MICOM Communications (WAN/Frame Relay equipment, later part of Nortel/General DataComm lineage) proprietary MIB managing Frame Relay end-to-end SPVC (Soft Permanent Virtual Circuit) connections. Its connection table, keyed by local interface/DLCI, records the connection ID, remote interface/DLCI, associated SVC interface and DNA (Directory Number Address), DCE-side PVC LMI state, SVC state, connection type, last-change time, disconnect reason, and switch type, while a companion SVC table records per-SVC DNA/DLCI, max transmit/receive size, and minimum transmit throughput. As a configuration/status MIB it lets an administrator confirm an SPVC's current state and diagnose its disconnect reason after an outage. It is deployed on MICOM Communications Frame Relay switching equipment. Engineers can download the MICOM-FRDCE-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in MICOM-FRDCE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- MICOM Communications Frame Relay switching equipment
Monitoring Examples
An administrator checks mcmFrConnectDisconnectReason to diagnose why a Frame Relay SPVC dropped, before escalating to the carrier for a circuit-level investigation.
What Can Be Monitored
- Frame Relay SPVC connection state and disconnect reason
This MIB depends on
Related MIBs
Imported Objects
From MICOM-OSCAR-MIB
| micom-oscar |
From MICOM-SYS-MIB
| mcmSysAsciiTimeOfDay | OBJECT-TYPE |
| mcmSysIfExtModule | OBJECT-TYPE |
| mcmSysIfExtPPA | OBJECT-TYPE |
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter | |
| TimeTicks |
From RFC1213-MIB
| DisplayString |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| micom_frdce | 1.3.6.1.4.1.335.1.4.9 | |||
| NTF mcmFrPvcLmiLinkUp | 1.3.6.1.4.1.335.1.4.9.0.1 | NAME = ; DESC = FR DCE TRAP message: indication of PVC LMI link \ up.\ Severity Level: INFORMATIVE.; HELP = PVC LMI Link Up. Normal Status Indicator.; | ||
| NTF mcmFrPvcLmiLinkDown | 1.3.6.1.4.1.335.1.4.9.0.2 | NAME = ; DESC = FR DCE TRAP message: indication of PVC LMI link \ down.\ Severity Level: CRITICAL.; HELP = PVC LMI link is down. Check cabling, and Mpanl \ link status, including Passport MPANL status \ for that particular Link. If further help is needed, \ please contact Field Personnel, or System Admin.; | ||
| frdce_configuration | 1.3.6.1.4.1.335.1.4.9.1 | |||
| mcmFrConnectTable | 1.3.6.1.4.1.335.1.4.9.1.1 | not-accessible | NAME = ; DESC = The Frame Relay End-to-End SPVC Connections \ table. (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| mcmFrConnectEntry | 1.3.6.1.4.1.335.1.4.9.1.1.1 | not-accessible | NAME = ; DESC = An entry in the Frame Relay End-to-End SPVC \ Connections table. (Operational); HELP = ; CAPABILITIES = ; | |
| INT mcmFrConnectIfIndexLocal | 1.3.6.1.4.1.335.1.4.9.1.1.1.1 | INTEGER | read-only | NAME = ; DESC = When switch type is FRDCE, the \ ifIndex of the local DCE interface. \ (Analogous to the ifIndex pointer in \ MIB II Interfaces Group, but specific \ to the FR End-to-End Connections \ table.) When switch type is HTDS, the \ ifIndex of the local WAN interface. \ (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrConnectDLCILocal | 1.3.6.1.4.1.335.1.4.9.1.1.1.2 | INTEGER | read-only | NAME = ; DESC = The DLCI value on the local DCE \ interface. Always 16 if HTDS. \ (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrConnectConnectId | 1.3.6.1.4.1.335.1.4.9.1.1.1.3 | INTEGER | read-only | NAME = ; DESC = The Connect ID of this SPVC mapping. \ Used to associate SVCs and Connect \ mappings. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrConnectIfIndexRemote | 1.3.6.1.4.1.335.1.4.9.1.1.1.4 | INTEGER | read-only | NAME = ; DESC = *******NOTE: THIS OBJECT IS OBSOLETE******* This information is no longer useful since \ the remote ifindex is configured in with the \ ConncectDNA when required.\ The ifIndex of the remote DCE interface. \ (To be carried in the user-to-user signaling \ of the SVC call setup to the remote access device.) \ (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrConnectDLCIRemote | 1.3.6.1.4.1.335.1.4.9.1.1.1.5 | INTEGER | read-only | NAME = ; DESC = The DLCI value on the remote DCE \ interface. (To be carried in the user-to-user \ signaling of the SVC call setup to the remote \ access device.) (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrConnectIfIndexSVC | 1.3.6.1.4.1.335.1.4.9.1.1.1.6 | INTEGER | read-only | NAME = ; DESC = Beginning with release 3.0, the value of this \ object indicates the ifIndex value corresponding \ to the tunneling PVC in which the SVC is established. \ Prior to release 3.0, this object indicates the \ ifIndex of the local DTE interface on \ which this SVC is to be established with the \ remote access device. (Operational); HELP = ; CAPABILITIES = ; |
| STR mcmFrConnectDNARemote | 1.3.6.1.4.1.335.1.4.9.1.1.1.7 | DisplayString | read-only | NAME = ; DESC = The DNA of the remote node with which the \ the SVC will be established. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrConnectSVCDLCI | 1.3.6.1.4.1.335.1.4.9.1.1.1.8 | INTEGER | read-only | NAME = ; DESC = The DLCI value of the SVC once the SVC \ has been established. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrConnectDCEPVCLMIState | 1.3.6.1.4.1.335.1.4.9.1.1.1.9 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates \ whether the local DCE considers the local \ PVC associated with this mapping active (1) \ or inactive (2). (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrConnectSVCState | 1.3.6.1.4.1.335.1.4.9.1.1.1.10 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates \ whether the local DCE considers the \ SVC associated with this mapping active (1) \ or inactive (2). (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrConnectConnType | 1.3.6.1.4.1.335.1.4.9.1.1.1.11 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates \ whether this end of the SPVC segment \ initiated the SVC call, master (1); \ or not, slave (1). (Operational); HELP = ; CAPABILITIES = ; |
| TIK mcmFrConnectLastChange | 1.3.6.1.4.1.335.1.4.9.1.1.1.12 | TimeTicks | read-only | NAME = ; DESC = The value of MIB II's sysUpTime at \ the time this PVC mapping entered its \ current operations state in the high to \ low direction. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrConnectDisconnectReason | 1.3.6.1.4.1.335.1.4.9.1.1.1.13 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates \ the reason why the SPVC is not active \ in the case of a connection failure. \ (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrConnectSwitchType | 1.3.6.1.4.1.335.1.4.9.1.1.1.14 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the type \ of SPVC connection (Operational); HELP = ; CAPABILITIES = ; |
| mcmFrConnSVCTable | 1.3.6.1.4.1.335.1.4.9.1.2 | not-accessible | NAME = ; DESC = The Frame Relay SVC Connect (Switched) \ Segment Configuration table. (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| mcmFrConnSVCEntry | 1.3.6.1.4.1.335.1.4.9.1.2.1 | not-accessible | NAME = ; DESC = An entry in the Frame Relay SVC Connect \ (Switched) Segment Configuration table. \ (Operational); HELP = ; CAPABILITIES = ; | |
| INT mcmFrConnSVCIfIndex | 1.3.6.1.4.1.335.1.4.9.1.2.1.1 | INTEGER | read-only | NAME = ; DESC = The ifIndex of the local frame relay physical \ line interface. (Operational); HELP = Analogous to the ifIndex pointer \ in the MIB II Interfaces Group, but specific to \ the FR SVC Connect (Switched) Segment \ Configuration table.); CAPABILITIES = ; |
| INT mcmFrConnSVCConnectId | 1.3.6.1.4.1.335.1.4.9.1.2.1.2 | INTEGER | read-only | NAME = ; DESC = The Connect ID of the Connection group \ entry to which this SVC belongs. (Operational); HELP = ; CAPABILITIES = ; |
| STR mcmFrConnSVCDNA | 1.3.6.1.4.1.335.1.4.9.1.2.1.3 | DisplayString | read-only | NAME = ; DESC = The DNA for the destination of the VC. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrConnSVCDLCI | 1.3.6.1.4.1.335.1.4.9.1.2.1.4 | INTEGER | read-only | NAME = ; DESC = The local DLCI for this SVC. Valid only \ when the SVC is established. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrConnSVCMaxTxSize | 1.3.6.1.4.1.335.1.4.9.1.2.1.5 | INTEGER | read-only | NAME = ; DESC = The maximum transmission frame size. This \ ..should be equal to (or greater than) the Rx \ size for the corresponding PVC. Expressed \ in bytes. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrConnSVCMaxRxSize | 1.3.6.1.4.1.335.1.4.9.1.2.1.6 | INTEGER | read-only | NAME = ; DESC = The maximum receive frame size. This \ should be equal to (or less than) the Tx \ size for the corresponding PVC. Expressed \ in bytes. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrConnSVCMinTxThroughput | 1.3.6.1.4.1.335.1.4.9.1.2.1.7 | INTEGER | read-only | NAME = ; DESC = The minimum transmission throughput. \ This should be equal to (or greater than) the \ Rx CIR for the corresponding PVC. Expressed \ in bits/sec. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrConnSVCMinRxThroughput | 1.3.6.1.4.1.335.1.4.9.1.2.1.8 | INTEGER | read-only | NAME = ; DESC = The minimum receive throughput. \ This should be equal to (or less than) the \ Tx CIR for the corresponding PVC. Expressed \ in bits/sec. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrConnSVCMaxTxThroughput | 1.3.6.1.4.1.335.1.4.9.1.2.1.9 | INTEGER | read-only | NAME = ; DESC = The maximum transmission throughput. \ (Always set to value of \ mcmFrConnSVCMinTxThroughput.) (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrConnSVCMaxRxThroughput | 1.3.6.1.4.1.335.1.4.9.1.2.1.10 | INTEGER | read-only | NAME = ; DESC = The maximum receive throughput. \ (Always set to value of \ mcmFrConnSVCMinRxThroughput.) (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrConnSVCMaxTxBurstSize | 1.3.6.1.4.1.335.1.4.9.1.2.1.11 | INTEGER | read-only | NAME = ; DESC = The maximum transmission burst size. \ Computation based on throughput and \ Excess Burst. Expressed in bits/sec. \ (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrConnSVCMaxRxBurstSize | 1.3.6.1.4.1.335.1.4.9.1.2.1.12 | INTEGER | read-only | NAME = ; DESC = The maximum receive burst size. \ Computation based on throughput and \ Excess Burst. Expressed in bits/sec. \ (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrConnSVCExcessTxBurstSize | 1.3.6.1.4.1.335.1.4.9.1.2.1.13 | INTEGER | read-only | NAME = ; DESC = The maximum number of uncommitted \ bits that the network will attempt to accept. \ This should be equal to (or greater than) the \ Rx Be configured for the corresponding PVC \ Expressed in bits/sec. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrConnSVCExcessRxBurstSize | 1.3.6.1.4.1.335.1.4.9.1.2.1.14 | INTEGER | read-only | NAME = ; DESC = The maximum number of uncommitted \ bits that the network will attempt to deliver. \ This should be equal to (or less than) the \ Tx Be configured for the corresponding PVC \ Expressed in bits/sec. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrConnSVCTransferPriority | 1.3.6.1.4.1.335.1.4.9.1.2.1.15 | INTEGER | read-only | NAME = ; DESC = The transfer priority for the corresponding \ pass-through connection. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrConnSVCReasonForDisconnect | 1.3.6.1.4.1.335.1.4.9.1.2.1.16 | INTEGER | read-only | NAME = ; DESC = The reason for the SVC Disconnect. \ (Operational); HELP = ; CAPABILITIES = ; |
| mcmFrServiceParamTable | 1.3.6.1.4.1.335.1.4.9.1.3 | not-accessible | NAME = ; DESC = The Proprietary Frame Relay Service Logical Port \ table. (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| mcmFrServiceParamEntry | 1.3.6.1.4.1.335.1.4.9.1.3.1 | not-accessible | NAME = ; DESC = An entry in the Proprietary Frame Relay Service \ Logical Port table. (Operational); HELP = ; CAPABILITIES = ; | |
| INT mcmFrServiceParamIfIndex | 1.3.6.1.4.1.335.1.4.9.1.3.1.1 | INTEGER | read-only | NAME = ; DESC = The ifIndex of the local physical interface. \ (Operational); HELP = Analogous to the ifIndex pointer in the \ MIB II Interfaces Group, but specific to \ the Prop FR Logical Port table.; CAPABILITIES = ; |
| INT mcmFrServiceParamFlowControl | 1.3.6.1.4.1.335.1.4.9.1.3.1.2 | INTEGER | read-only | NAME = ; DESC = The Flow Control for out-bound data \ (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrServiceParamDelta | 1.3.6.1.4.1.335.1.4.9.1.3.1.3 | INTEGER | read-only | NAME = ; DESC = The delta time interval to increase or decrease \ the transmission rate depending on the number of \ frames received with the FECN bit cleared or set; \ respectively. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrServiceParamConsecutiveFrames | 1.3.6.1.4.1.335.1.4.9.1.3.1.4 | INTEGER | read-only | NAME = ; DESC = The number of consecutive frames received with \ the BECN bit set before reducing the transmit rate. \ (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrServiceParamRateEnf | 1.3.6.1.4.1.335.1.4.9.1.3.1.5 | INTEGER | read-only | NAME = ; DESC = The rate enforcement enabled/disabled parameter \ for FR congestion management processing. \ (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrServiceParamTxMTU | 1.3.6.1.4.1.335.1.4.9.1.3.1.6 | INTEGER | read-only | NAME = ; DESC = The maximum transmission FR packet size \ expressed in bytes. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrServiceParamRxMTU | 1.3.6.1.4.1.335.1.4.9.1.3.1.7 | INTEGER | read-only | NAME = ; DESC = The maximum receive FR packet size \ expressed in bytes. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrServiceParamTxBc | 1.3.6.1.4.1.335.1.4.9.1.3.1.8 | INTEGER | read-only | NAME = ; DESC = The transmission committed burst size \ expressed in bits/sec. (Always set to Tx Be.) \ (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrServiceParamRxBc | 1.3.6.1.4.1.335.1.4.9.1.3.1.9 | INTEGER | read-only | NAME = ; DESC = The receive committed burst size \ expressed in bits/sec. (Always set to Rx Be.) \ (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrServiceParamTxBe | 1.3.6.1.4.1.335.1.4.9.1.3.1.10 | INTEGER | read-only | NAME = ; DESC = The transmission excess burst size \ expressed in bits/sec. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrServiceParamRxBe | 1.3.6.1.4.1.335.1.4.9.1.3.1.11 | INTEGER | read-only | NAME = ; DESC = The receive excess burst size \ expressed in bits/sec. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrServiceParamTxThroughput | 1.3.6.1.4.1.335.1.4.9.1.3.1.12 | INTEGER | read-only | NAME = ; DESC = The transmission CIR expressed \ in bits/sec. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrServiceParamRxThroughput | 1.3.6.1.4.1.335.1.4.9.1.3.1.13 | INTEGER | read-only | NAME = ; DESC = The receive CIR expressed \ in bits/sec. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrServiceParamPVCLMIStatus | 1.3.6.1.4.1.335.1.4.9.1.3.1.14 | INTEGER | read-only | NAME = ; DESC = The status of the PVC LMI. \ (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmFrServiceParamSVCLMIStatus | 1.3.6.1.4.1.335.1.4.9.1.3.1.15 | INTEGER | read-only | NAME = ; DESC = The status of the SVC LMI. \ (Not supported in the access device 1.1 release.) \ (Operational); HELP = ; CAPABILITIES = ; |
| nvmFrConnectTable | 1.3.6.1.4.1.335.1.4.9.1.4 | not-accessible | NAME = ; DESC = The Frame Relay End-to-End SPVC Connections \ table. (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| nvmFrConnectEntry | 1.3.6.1.4.1.335.1.4.9.1.4.1 | not-accessible | NAME = ; DESC = An entry in the Frame Relay End-to-End SPVC \ Connections table. (Configuration); HELP = ; CAPABILITIES = ; | |
| INT nvmFrConnectIfIndexLocal | 1.3.6.1.4.1.335.1.4.9.1.4.1.1 | INTEGER | read-only | NAME = ; DESC = The ifIndex of the local DCE interface. \ (Configuration); HELP = Analogous to the ifIndex pointer in the \ MIB II Interfaces Group, but specific to \ the FR End-to-End Connections table.; CAPABILITIES = ; |
| INT nvmFrConnectDLCILocal | 1.3.6.1.4.1.335.1.4.9.1.4.1.2 | INTEGER | read-only | NAME = ; DESC = The DLCI value on the local DCE \ interface. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmFrConnectConnectId | 1.3.6.1.4.1.335.1.4.9.1.4.1.3 | INTEGER | read-only | NAME = ; DESC = The Connect ID of this SPVCmapping. \ (Configuration); HELP = Used to associate SVCs and Connect \ mappings. (This object has temporarily \ been assigned read-only access. Read-write \ access may be assigned in future access device \ releases.); CAPABILITIES = ; |
| INT nvmFrConnectIfIndexRemote | 1.3.6.1.4.1.335.1.4.9.1.4.1.4 | INTEGER | read-write | NAME = ; DESC = *******NOTE: THIS OBJECT IS OBSOLETE******* \ This information is no longer useful since \ the remote ifindex is configured in with the \ ConncectDNA when required.\ The ifIndex of the remote DCE interface. \ (To be carried in the user-to-user signaling \ of the SVC call setup to the remote access device.) \ (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmFrConnectDLCIRemote | 1.3.6.1.4.1.335.1.4.9.1.4.1.5 | INTEGER | read-write | NAME = ; DESC = The DLCI value on the remote DCE \ interface. (To be carried in the user-to-user \ signaling of the SVC call setup to the remote \ access device.) (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmFrConnectIfIndexSVC | 1.3.6.1.4.1.335.1.4.9.1.4.1.6 | INTEGER | read-write | NAME = ; DESC = *******NOTE: THIS OBJECT IS OBSOLETE******* \ This information is no longer useful since \ all that is needed to make a SVC connection is \ a DNA. The underlying MPANL will determine on \ which link the connection is to be made.\ The ifIndex of the local DTE interface on \ which this SVC is to be established with the \ remote access device. (Configuration); HELP = ; CAPABILITIES = ; |
| STR nvmFrConnectDNARemote | 1.3.6.1.4.1.335.1.4.9.1.4.1.7 | DisplayString | read-write | NAME = ; DESC = The DNA of the remote node with which the \ the SVC will be established. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmFrConnectConnType | 1.3.6.1.4.1.335.1.4.9.1.4.1.8 | INTEGER | read-write | NAME = ; DESC = The value of this object indicates \ whether this end of the SPVC segment \ initiated the SVC call, master (1); \ or not, slave (1). (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmFrConnectRowStatus | 1.3.6.1.4.1.335.1.4.9.1.4.1.9 | INTEGER | read-write | NAME = ; DESC = This object is used to add new rows \ in the connection table, modify existing \ rows,and to delete existing rows (Configuration); HELP = To add a new row, createAndGo (4) is used. \ To modify an existing row, active (1) is \ used. To delete an existing row, \ destroy (6) is used. ; CAPABILITIES = ; |
| INT nvmFrConnectSwitchType | 1.3.6.1.4.1.335.1.4.9.1.4.1.10 | INTEGER | read-write | NAME = ; DESC = The value of this object indicates the type \ of SPVC connection (Configuration); HELP = ; CAPABILITIES = ; |
| nvmFrConnSVCTable | 1.3.6.1.4.1.335.1.4.9.1.5 | not-accessible | NAME = ; DESC = The Frame Relay SVC Connect (Switched) \ Segment Configuration table. (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| nvmFrConnSVCEntry | 1.3.6.1.4.1.335.1.4.9.1.5.1 | not-accessible | NAME = ; DESC = An entry in the Frame Relay SVC Connect \ (Switched) Segment Configuration table. \ (Configuration); HELP = ; CAPABILITIES = ; | |
| INT nvmFrConnSVCIfIndex | 1.3.6.1.4.1.335.1.4.9.1.5.1.1 | INTEGER | read-only | NAME = ; DESC = The ifIndex of the local frame relay physical \ line interface. (Configuration); HELP = Analogous to the ifIndex pointer \ in the MIB II Interfaces Group, but specific to \ the FR SVC Connect (Switched) Segment \ Configuration table.; CAPABILITIES = ; |
| INT nvmFrConnSVCConnectId | 1.3.6.1.4.1.335.1.4.9.1.5.1.2 | INTEGER | read-only | NAME = ; DESC = The Connect ID of the Connection group \ entry to which this SVC belongs. (Configuration); HELP = ; CAPABILITIES = ; |
| STR nvmFrConnSVCDNA | 1.3.6.1.4.1.335.1.4.9.1.5.1.3 | DisplayString | read-write | NAME = ; DESC = The DNA for the destination of the VC. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmFrConnSVCMaxTxSize | 1.3.6.1.4.1.335.1.4.9.1.5.1.4 | INTEGER | read-write | NAME = ; DESC = The maximum transmission frame size. This \ ..should be equal to (or greater than) the Rx \ size for the corresponding PVC. Expressed \ in bytes. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmFrConnSVCMaxRxSize | 1.3.6.1.4.1.335.1.4.9.1.5.1.5 | INTEGER | read-write | NAME = ; DESC = The maximum receive frame size. This \ should be equal to (or less than) the Tx \ size for the corresponding PVC. Expressed \ in bytes. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmFrConnSVCMinTxThroughput | 1.3.6.1.4.1.335.1.4.9.1.5.1.6 | INTEGER | read-write | NAME = ; DESC = The minimum transmission throughput. \ This should be equal to (or greater than) the \ Rx CIR for the corresponding PVC. Expressed \ in bits/sec. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmFrConnSVCMinRxThroughput | 1.3.6.1.4.1.335.1.4.9.1.5.1.7 | INTEGER | read-write | NAME = ; DESC = The minimum receive throughput. \ This should be equal to (or less than) the \ Tx CIR for the corresponding PVC. Expressed \ in bits/sec. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmFrConnSVCMaxTxThroughput | 1.3.6.1.4.1.335.1.4.9.1.5.1.8 | INTEGER | read-only | NAME = ; DESC = The maximum transmission throughput. \ (Always set to value of \ nvmFrConnSVCMinTxThroughput.) \ (This object has temporarily \ been assigned read-only access. Read-write \ access may be assigned in future access device \ releases.) (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmFrConnSVCMaxRxThroughput | 1.3.6.1.4.1.335.1.4.9.1.5.1.9 | INTEGER | read-only | NAME = ; DESC = The maximum receive throughput. \ (Always set to value of \ nvmFrConnSVCMinRxThroughput.) (Configuration); HELP = (This object has temporarily \ been assigned read-only access. Read-write \ access may be assigned in future access device \ releases.); CAPABILITIES = ; |
| INT nvmFrConnSVCMaxTxBurstSize | 1.3.6.1.4.1.335.1.4.9.1.5.1.10 | INTEGER | read-only | NAME = ; DESC = The maximum transmission burst size. \ Computation based on throughput and \ Excess Burst. Expressed in bits/sec. \ (Configuration); HELP = (This object has temporarily \ been assigned read-only access. Read-write \ access may be assigned in future access device \ releases.); CAPABILITIES = ; |
| INT nvmFrConnSVCMaxRxBurstSize | 1.3.6.1.4.1.335.1.4.9.1.5.1.11 | INTEGER | read-only | NAME = ; DESC = The maximum receive burst size. \ Computation based on throughput and \ Excess Burst. Expressed in bits/sec. \ (Configuration); HELP = (This object has temporarily \ been assigned read-only access. Read-write \ access may be assigned in future access device \ releases.); CAPABILITIES = ; |
| INT nvmFrConnSVCExcessTxBurstSize | 1.3.6.1.4.1.335.1.4.9.1.5.1.12 | INTEGER | read-write | NAME = ; DESC = The maximum number of uncommitted \ bits that the network will attempt to accept. \ (Configuration); HELP = This should be equal to (or greater than) the \ Rx Be configured for the corresponding PVC \ Expressed in bits/sec.; CAPABILITIES = ; |
| INT nvmFrConnSVCExcessRxBurstSize | 1.3.6.1.4.1.335.1.4.9.1.5.1.13 | INTEGER | read-write | NAME = ; DESC = The maximum number of uncommitted \ bits that the network will attempt to deliver. \ (Configuration); HELP = This should be equal to (or less than) the \ Tx Be configured for the corresponding PVC \ Expressed in bits/sec.; CAPABILITIES = ; |
| INT nvmFrConnSVCTransferPriority | 1.3.6.1.4.1.335.1.4.9.1.5.1.14 | INTEGER | read-write | NAME = ; DESC = The transfer priority for the corresponding \ pass-through connection. (Configuration); HELP = ; CAPABILITIES = ; |
| nvmFrServiceParamTable | 1.3.6.1.4.1.335.1.4.9.1.6 | not-accessible | NAME = ; DESC = The Proprietary Frame Relay Service Logical Port \ table. (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| nvmFrServiceParamEntry | 1.3.6.1.4.1.335.1.4.9.1.6.1 | not-accessible | NAME = ; DESC = An entry in the Proprietary Frame Relay Service Logical \ Port table. (Configuration); HELP = ; CAPABILITIES = ; | |
| INT nvmFrServiceParamIfIndex | 1.3.6.1.4.1.335.1.4.9.1.6.1.1 | INTEGER | read-only | NAME = ; DESC = The ifIndex of the local physical interface. \ (Configuration); HELP = Analogous to the ifIndex pointer in the \ MIB II Interfaces Group, but specific to \ the Prop FR Logical Port table.; CAPABILITIES = ; |
| INT nvmFrServiceParamFlowControl | 1.3.6.1.4.1.335.1.4.9.1.6.1.2 | INTEGER | read-write | NAME = ; DESC = The Flow Control for out-bound data \ (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmFrServiceParamDelta | 1.3.6.1.4.1.335.1.4.9.1.6.1.3 | INTEGER | read-write | NAME = ; DESC = The delta time interval to increase or decrease \ the transmission rate depending on the number of \ frames received with the FECN bit cleared or set; \ respectively. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmFrServiceParamConsecutiveFrames | 1.3.6.1.4.1.335.1.4.9.1.6.1.4 | INTEGER | read-write | NAME = ; DESC = The number of consecutive frames received with \ the BECN bit set before reducing the transmit rate. \ (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmFrServiceParamRateEnf | 1.3.6.1.4.1.335.1.4.9.1.6.1.5 | INTEGER | read-write | NAME = ; DESC = The rate enforcement enabled/disabled parameter \ for FR congestion management processing. \ (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmFrServiceParamTxMTU | 1.3.6.1.4.1.335.1.4.9.1.6.1.6 | INTEGER | read-write | NAME = ; DESC = The maximum transmission FR packet size \ expressed in bytes. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmFrServiceParamRxMTU | 1.3.6.1.4.1.335.1.4.9.1.6.1.7 | INTEGER | read-write | NAME = ; DESC = The maximum receive FR packet size \ expressed in bytes. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmFrServiceParamTxBc | 1.3.6.1.4.1.335.1.4.9.1.6.1.8 | INTEGER | read-only | NAME = ; DESC = The transmission committed burst size \ expressed in bits/sec. (Always set to Tx Be.) \ (Configuration); HELP = (This object has temporarily \ been assigned read-only access. Read-write \ access may be assigned in future access device \ releases.); CAPABILITIES = ; |
| INT nvmFrServiceParamRxBc | 1.3.6.1.4.1.335.1.4.9.1.6.1.9 | INTEGER | read-only | NAME = ; DESC = The receive committed burst size \ expressed in bits/sec. (Always set to Rx Be.) \ (This object has temporarily \ been assigned read-only access. Read-write \ access may be assigned in future access device \ releases.) (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmFrServiceParamTxBe | 1.3.6.1.4.1.335.1.4.9.1.6.1.10 | INTEGER | read-write | NAME = ; DESC = The transmission excess burst size \ expressed in bits/sec. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmFrServiceParamRxBe | 1.3.6.1.4.1.335.1.4.9.1.6.1.11 | INTEGER | read-write | NAME = ; DESC = The receive excess burst size \ expressed in bits/sec. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmFrServiceParamTxThroughput | 1.3.6.1.4.1.335.1.4.9.1.6.1.12 | INTEGER | read-write | NAME = ; DESC = The transmission CIR expressed \ in bits/sec. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmFrServiceParamRxThroughput | 1.3.6.1.4.1.335.1.4.9.1.6.1.13 | INTEGER | read-write | NAME = ; DESC = The receive CIR expressed \ in bits/sec. (Configuration); HELP = ; CAPABILITIES = ; |
| mcmMPANLConnSVCTable | 1.3.6.1.4.1.335.1.4.9.1.7 | not-accessible | NAME = ; DESC = The MPANL SVC Connect (Switched) \ Segment Configuration table. (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| mcmMPANLConnSVCEntry | 1.3.6.1.4.1.335.1.4.9.1.7.1 | not-accessible | NAME = ; DESC = An entry in the Frame Relay SVC Connect \ (Switched) Segment Configuration table. \ (Operational); HELP = ; CAPABILITIES = ; | |
| INT mcmMPANLConnSVCConnectId | 1.3.6.1.4.1.335.1.4.9.1.7.1.1 | INTEGER | read-only | NAME = ; DESC = The Connect ID of the Connection group \ entry to which this SVC belongs. (Operational); HELP = ; CAPABILITIES = ; |
| STR mcmMPANLConnSVCDNA | 1.3.6.1.4.1.335.1.4.9.1.7.1.2 | DisplayString | read-only | NAME = ; DESC = The DNA for the destination of the VC. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmMPANLConnSVCDLCI | 1.3.6.1.4.1.335.1.4.9.1.7.1.3 | INTEGER | read-only | NAME = ; DESC = The local DLCI for this SVC. Valid only \ when the SVC is established. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmMPANLConnSVCMaxTxSize | 1.3.6.1.4.1.335.1.4.9.1.7.1.4 | INTEGER | read-only | NAME = ; DESC = The maximum transmission frame size. This \ ..should be equal to (or greater than) the Rx \ size for the corresponding PVC. Expressed \ in bytes. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmMPANLConnSVCMaxRxSize | 1.3.6.1.4.1.335.1.4.9.1.7.1.5 | INTEGER | read-only | NAME = ; DESC = The maximum receive frame size. This \ should be equal to (or less than) the Tx \ size for the corresponding PVC. Expressed \ in bytes. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmMPANLConnSVCMinTxThroughput | 1.3.6.1.4.1.335.1.4.9.1.7.1.6 | INTEGER | read-only | NAME = ; DESC = The minimum transmission throughput. \ This should be equal to (or greater than) the \ Rx CIR for the corresponding PVC. Expressed \ in bits/sec. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmMPANLConnSVCMinRxThroughput | 1.3.6.1.4.1.335.1.4.9.1.7.1.7 | INTEGER | read-only | NAME = ; DESC = The minimum receive throughput. \ This should be equal to (or less than) the \ Tx CIR for the corresponding PVC. Expressed \ in bits/sec. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmMPANLConnSVCMaxTxThroughput | 1.3.6.1.4.1.335.1.4.9.1.7.1.8 | INTEGER | read-only | NAME = ; DESC = The maximum transmission throughput. \ (Always set to value of \ mcmMPANLConnSVCMinTxThroughput.) (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmMPANLConnSVCMaxRxThroughput | 1.3.6.1.4.1.335.1.4.9.1.7.1.9 | INTEGER | read-only | NAME = ; DESC = The maximum receive throughput. \ (Always set to value of \ mcmMPANLConnSVCMinRxThroughput.) (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmMPANLConnSVCMaxTxBurstSize | 1.3.6.1.4.1.335.1.4.9.1.7.1.10 | INTEGER | read-only | NAME = ; DESC = The maximum transmission burst size. \ Computation based on throughput and \ Excess Burst. Expressed in bits/sec. \ (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmMPANLConnSVCMaxRxBurstSize | 1.3.6.1.4.1.335.1.4.9.1.7.1.11 | INTEGER | read-only | NAME = ; DESC = The maximum receive burst size. \ Computation based on throughput and \ Excess Burst. Expressed in bits/sec. \ (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmMPANLConnSVCExcessTxBurstSize | 1.3.6.1.4.1.335.1.4.9.1.7.1.12 | INTEGER | read-only | NAME = ; DESC = The maximum number of uncommitted \ bits that the network will attempt to accept. \ This should be equal to (or greater than) the \ Rx Be configured for the corresponding PVC \ Expressed in bits/sec. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmMPANLConnSVCExcessRxBurstSize | 1.3.6.1.4.1.335.1.4.9.1.7.1.13 | INTEGER | read-only | NAME = ; DESC = The maximum number of uncommitted \ bits that the network will attempt to deliver. \ This should be equal to (or less than) the \ Tx Be configured for the corresponding PVC \ Expressed in bits/sec. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmMPANLConnSVCTransferPriority | 1.3.6.1.4.1.335.1.4.9.1.7.1.14 | INTEGER | read-only | NAME = ; DESC = The transfer priority for the corresponding \ pass-through connection. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmMPANLConnSVCReasonForDisconnect | 1.3.6.1.4.1.335.1.4.9.1.7.1.15 | INTEGER | read-only | NAME = ; DESC = The reason for the SVC Disconnect. \ (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmMPANLConnSVCDiscardPriority | 1.3.6.1.4.1.335.1.4.9.1.7.1.16 | INTEGER | read-only | NAME = ; DESC = The discard priority for the MPANL \ SVC connection. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmMPANLConnSVCIfindex | 1.3.6.1.4.1.335.1.4.9.1.7.1.17 | INTEGER | read-only | NAME = ; DESC = Beginning with release 3.0, the value of this \ object indicates the ifIndex value of the MPANL \ DTE/DCE interface corresponding to the tunneling \ PVC in which the SVC is established. \ Prior to release 3.0, this object indicates the \ ifIndex of the local frame relay physical \ line interface. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmMPANLConnSVCSetupPriority | 1.3.6.1.4.1.335.1.4.9.1.7.1.18 | INTEGER | read-only | NAME = ; DESC = This indicates the priority of a path at \ call-establishment time, and also determines \ the potential for bumping established paths \ to acquire their bandwidth. A value of 1 \ signifies the highest priority, and 5 signifies \ the lowest. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmMPANLConnSVCHoldingPriority | 1.3.6.1.4.1.335.1.4.9.1.7.1.19 | INTEGER | read-only | NAME = ; DESC = This indicates the priority a path maintains \ once the path has been established, and also determines \ the likelihood of being bumped by a new path, thus \ losing the bandwidth. A value of 1 signifies the highest \ priority, and 5 signifies the lowest. (Operational); HELP = ; CAPABILITIES = ; |
| nvmMPANLConnSVCTable | 1.3.6.1.4.1.335.1.4.9.1.8 | not-accessible | NAME = ; DESC = The MPANL SVC Connect (Switched) \ Segment Configuration table. (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| nvmMPANLConnSVCEntry | 1.3.6.1.4.1.335.1.4.9.1.8.1 | not-accessible | NAME = ; DESC = An entry in the Frame Relay SVC Connect \ (Switched) Segment Configuration table. \ (Operational); HELP = ; CAPABILITIES = ; | |
| INT nvmMPANLConnSVCConnectId | 1.3.6.1.4.1.335.1.4.9.1.8.1.1 | INTEGER | read-only | NAME = ; DESC = The Connect ID of the Connection group \ entry to which this SVC belongs. (Configuration); HELP = ; CAPABILITIES = ; |
| STR nvmMPANLConnSVCDNA | 1.3.6.1.4.1.335.1.4.9.1.8.1.2 | DisplayString | read-write | NAME = ; DESC = The DNA for the destination of the VC. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmMPANLConnSVCMaxTxSize | 1.3.6.1.4.1.335.1.4.9.1.8.1.3 | INTEGER | read-write | NAME = ; DESC = The maximum transmission frame size. This \ ..should be equal to (or greater than) the Rx \ size for the corresponding PVC. Expressed \ in bytes. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmMPANLConnSVCMaxRxSize | 1.3.6.1.4.1.335.1.4.9.1.8.1.4 | INTEGER | read-write | NAME = ; DESC = The maximum receive frame size. This \ should be equal to (or less than) the Tx \ size for the corresponding PVC. Expressed \ in bytes. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmMPANLConnSVCMinTxThroughput | 1.3.6.1.4.1.335.1.4.9.1.8.1.5 | INTEGER | read-write | NAME = ; DESC = The minimum transmission throughput. \ This should be equal to (or greater than) the \ Rx CIR for the corresponding PVC. Expressed \ in bits/sec. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmMPANLConnSVCMinRxThroughput | 1.3.6.1.4.1.335.1.4.9.1.8.1.6 | INTEGER | read-write | NAME = ; DESC = The minimum receive throughput. \ This should be equal to (or less than) the \ Tx CIR for the corresponding PVC. Expressed \ in bits/sec. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmMPANLConnSVCMaxTxThroughput | 1.3.6.1.4.1.335.1.4.9.1.8.1.7 | INTEGER | read-write | NAME = ; DESC = The maximum transmission throughput. \ (Always set to value of \ nvmMPANLConnSVCMinTxThroughput.) (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmMPANLConnSVCMaxRxThroughput | 1.3.6.1.4.1.335.1.4.9.1.8.1.8 | INTEGER | read-write | NAME = ; DESC = The maximum receive throughput. \ (Always set to value of \ nvmMPANLConnSVCMinRxThroughput.) (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmMPANLConnSVCMaxTxBurstSize | 1.3.6.1.4.1.335.1.4.9.1.8.1.9 | INTEGER | read-write | NAME = ; DESC = The maximum transmission burst size. \ Computation based on throughput and \ Excess Burst. Expressed in bits/sec. \ (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmMPANLConnSVCMaxRxBurstSize | 1.3.6.1.4.1.335.1.4.9.1.8.1.10 | INTEGER | read-write | NAME = ; DESC = The maximum receive burst size. \ Computation based on throughput and \ Excess Burst. Expressed in bits/sec. \ (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmMPANLConnSVCExcessTxBurstSize | 1.3.6.1.4.1.335.1.4.9.1.8.1.11 | INTEGER | read-write | NAME = ; DESC = The maximum number of uncommitted \ bits that the network will attempt to accept. \ This should be equal to (or greater than) the \ Rx Be configured for the corresponding PVC \ Expressed in bits/sec. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmMPANLConnSVCExcessRxBurstSize | 1.3.6.1.4.1.335.1.4.9.1.8.1.12 | INTEGER | read-write | NAME = ; DESC = The maximum number of uncommitted \ bits that the network will attempt to deliver. \ This should be equal to (or less than) the \ Tx Be configured for the corresponding PVC \ Expressed in bits/sec. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmMPANLConnSVCTransferPriority | 1.3.6.1.4.1.335.1.4.9.1.8.1.13 | INTEGER | read-write | NAME = ; DESC = The transfer priority for the corresponding \ pass-through connection. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmMPANLConnSVCDiscardPriority | 1.3.6.1.4.1.335.1.4.9.1.8.1.14 | INTEGER | read-write | NAME = ; DESC = The discard priority for the MPANL \ SVC connection. (configuration); HELP = ; CAPABILITIES = ; |
| INT nvmMPANLConnSVCSetupPriority | 1.3.6.1.4.1.335.1.4.9.1.8.1.15 | INTEGER | read-write | NAME = ; DESC = This indicates the priority of a path at \ call-establishment time, and also determines \ the potential for bumping established paths \ to acquire their bandwidth. A value of 1 \ signifies the highest priority, and 5 signifies \ the lowest. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmMPANLConnSVCHoldingPriority | 1.3.6.1.4.1.335.1.4.9.1.8.1.16 | INTEGER | read-write | NAME = ; DESC = This indicates the priority a path maintains \ once the path has been established, and also determines \ the likelihood of being bumped by a new path, thus \ losing the bandwidth. A value of 1 signifies the highest \ priority, and 5 signifies the lowest. (Configuration); HELP = ; CAPABILITIES = ; |
RFC description
Legacy Micom vendor-private MIB for Frame Relay Data Communications Equipment management.
Start monitoring MICOM Communications Frame Relay switching equipment (SPVC) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.