All MIBs › FRDCE-OPT-MIB
Category: Frame Relay
Description: Supplies network-side managed objects for Frame Relay data circuit-terminating equipment interfaces, as an optional extension to Frame Relay DCE management.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is FRDCE-OPT-MIB?
FRDCE-OPT-MIB is a Codex/Motorola-lineage vendor MIB providing network-side (DCE) optional management extensions for Frame Relay interfaces on CDX-6500-series equipment. It exposes port- and station-level protocol group configuration objects for the Frame Relay DCE side of a WAN link, covering how the device's frame relay ports and stations are configured to communicate. Its monitoring value centers on interface/software configuration status, letting an administrator confirm the correct protocol group is applied to a given port or station, which affects whether the link negotiates correctly with attached DTE equipment. It builds on the base Frame Relay interface conventions shared with the companion FRDTE-OPT-MIB and FRI-OPT-MIB modules for the same CDX-6500 hardware family. It is deployed in legacy Frame Relay WAN environments using Codex CDX-6500 access devices on the network (DCE) side of the link. Engineers can download the FRDCE-OPT-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in FRDCE-OPT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Codex CDX-6500 Frame Relay access device (DCE side)
Monitoring Examples
An administrator could poll cdx6500PCTPortProtocolGroup and cdx6500PSTPortProtocolGroup to confirm which protocol group is assigned to a given Frame Relay port, and cdx6500PCTStationProtocolGroup/cdx6500PSTStationProtocolGroup to check station-level settings, catching a misconfigured protocol group that would prevent a PVC from establishing correctly with the far-end DTE device.
What Can Be Monitored
- Frame Relay port protocol group configuration
- Frame Relay station protocol group configuration
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| Counter | |
| Gauge | |
| IpAddress | |
| NetworkAddress | |
| TimeTicks | |
| enterprises | |
| mgmt |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| codex | 1.3.6.1.4.1.449 | |||
| cdxProductSpecific | 1.3.6.1.4.1.449.2 | |||
| cdx6500 | 1.3.6.1.4.1.449.2.1 | |||
| cdx6500Configuration | 1.3.6.1.4.1.449.2.1.2 | |||
| cdx6500CfgProtocolGroup | 1.3.6.1.4.1.449.2.1.2.1 | |||
| cdx6500PCTPortProtocolGroup | 1.3.6.1.4.1.449.2.1.2.1.1 | |||
| cdx6500PCTFRDCEPortTable | 1.3.6.1.4.1.449.2.1.2.1.1.6 | not-accessible | All of the configuration parameters relevant to the Frame Relay DCE Port table. | |
| cdx6500PCTFRDCEPortEntry | 1.3.6.1.4.1.449.2.1.2.1.1.6.1 | not-accessible | A row of SDLC Port configuration parameters. | |
| INT cdx6500frdcepCfgPortNum | 1.3.6.1.4.1.449.2.1.2.1.1.6.1.1 | INTEGER | read-only | Port Number. |
| INT cdx6500frdcepConnectionType | 1.3.6.1.4.1.449.2.1.2.1.1.6.1.2 | INTEGER | read-only | Specify the control signal handshake and clocking required for a connection to be made to this port: simp - simple, no control signals required. newvalSimp - same functionality as 'simp', new enumeration added for RFC1155 compatibility. |
| INT cdx6500frdcepClockSource | 1.3.6.1.4.1.449.2.1.2.1.1.6.1.3 | INTEGER | read-only | int - internal clock source. ext - external clock source. extint - Internal receive and external transmit clock source (DCE only). extlp - external receive and loopback transmit clock source (DTE only). EXTLP must be configured in conjunction with EXTINT. newvalInt - same functionality as 'int', new enumeration added for RFC1155 compatibility. |
| INT cdx6500frdcepClockSpeed | 1.3.6.1.4.1.449.2.1.2.1.1.6.1.4 | INTEGER | read-only | This is the speed of the port in bits per second, when using internal clocking. Note that the maximum port speed is dependent on the type of hardware installed. Consult the users manual for details. |
| INT cdx6500frdcepMaxStations | 1.3.6.1.4.1.449.2.1.2.1.1.6.1.5 | INTEGER | read-only | The highest station number to be configured on this FRA port. It is used to limit the configuration of stations. |
| INT cdx6500frdcepCtrlProtocol | 1.3.6.1.4.1.449.2.1.2.1.1.6.1.6 | INTEGER | read-only | Whether ANSI T1.617 Annex D or LMI Support is enabled none - None is enabled. annexD - Annex D is enabled. lmi - LMI is enabled. annexA - Annex A is enabled. newvalAnnexD - same functionality as 'annexD', new enumeration added for RFC1155 compatibility. |
| INT cdx6500frdcepT391 | 1.3.6.1.4.1.449.2.1.2.1.1.6.1.7 | INTEGER | read-only | This parameter is the Link Integrity Verification Timer polling period. When operating in bi-directional mode, FRA port sends status enquiry messages to network every T391/nT1 seconds. |
| INT cdx6500frdcepT392 | 1.3.6.1.4.1.449.2.1.2.1.1.6.1.8 | INTEGER | read-only | This parameter is the Polling Cycle Verification Timer priod. The FRA port expects status enquiry messages every T392/nT2 seconds. This parameter must be set to a value greater than N391/nT1. |
| INT cdx6500frdcepN391 | 1.3.6.1.4.1.449.2.1.2.1.1.6.1.9 | INTEGER | read-only | This parameter is the Full Status Polling Cycle count. When operating in bi-directional mode, the FRA port sends Full status enquiry messages to network every N391/nN1 polls. |
| INT cdx6500frdcepN392 | 1.3.6.1.4.1.449.2.1.2.1.1.6.1.10 | INTEGER | read-only | This parameter is the Error Inactivity Threshold. The data link is declared to be up after receiving N392/nN2 consecutive events without error. The data link is declared to be down when any N392/nN2 of the previous N393/nN3 events were received in error. This parameter must be set to a value less than or equal to N393/nN3. |
| INT cdx6500frdcepN393 | 1.3.6.1.4.1.449.2.1.2.1.1.6.1.11 | INTEGER | read-only | This parameter is the Monitored Events Count for measuring N392. The data link is declared to be down when any N392/nN2 of the previous N393/nN3 events were received in error. This parameter must be set to a value greater than or equal to N392/nN2. |
| INT cdx6500frdcepNT1 | 1.3.6.1.4.1.449.2.1.2.1.1.6.1.12 | INTEGER | read-only | This parameter is the Link Integrity Verification Timer polling period. When operating in bi-directional mode, FRA port sends status enquiry messages to network every T391/nT1 seconds. |
| INT cdx6500frdcepNT2 | 1.3.6.1.4.1.449.2.1.2.1.1.6.1.13 | INTEGER | read-only | This parameter is the Polling Cycle Verification Timer priod. The FRA port expects status enquiry messages every T392/nT2 seconds. This parameter must be set to a value greater than N391/nT1. |
| INT cdx6500frdcepNN1 | 1.3.6.1.4.1.449.2.1.2.1.1.6.1.14 | INTEGER | read-only | This parameter is the Full Status Polling Cycle count. When operating in bi-directional mode, the FRA port sends Full status enquiry messages to network every N391/nN1 polls. |
| INT cdx6500frdcepNN2 | 1.3.6.1.4.1.449.2.1.2.1.1.6.1.15 | INTEGER | read-only | This parameter is the Error Inactivity Threshold. The data link is declared to be up after receiving N392/nN2 consecutive events without error. The data link is declared to be down when any N392/nN2 of the previous N393/nN3 events were received in error. This parameter must be set to a value less than or equal to N393/nN3. |
| INT cdx6500frdcepNN3 | 1.3.6.1.4.1.449.2.1.2.1.1.6.1.16 | INTEGER | read-only | This parameter is the Monitored Events Count for measuring N392. The data link is declared to be down when any N392/nN2 of the previous N393/nN3 events were received in error. This parameter must be set to a value greater than or equal to N392/nN2. |
| STR cdx6500frdcepSubaddress | 1.3.6.1.4.1.449.2.1.2.1.1.6.1.17 | DisplayString | read-only | Calls addressed to this node and with this subaddress will be routed to this port. |
| INT cdx6500frdcepBiDirAnnexD | 1.3.6.1.4.1.449.2.1.2.1.1.6.1.18 | INTEGER | read-only | Whether ANSI T1.617 Annex D bi-directional procedures are enabled bi - Bi-directional procedures are enabled. uni - Uni-directional procedures are enabled. newvalBi - same functionality as 'bi', new enumeration added for RFC1155 compatibility. |
| INT cdx6500frdcepInvertTXClock | 1.3.6.1.4.1.449.2.1.2.1.1.6.1.19 | INTEGER | read-only | This parameter specifies whether the phase of the transmit clock should be inverted. Note: This parameter is primarily for X.21 electrical interfaces. no - Don't invert. yes - Invert. |
| STR cdx6500frdcepControlProtocolOptions | 1.3.6.1.4.1.449.2.1.2.1.1.6.1.20 | DisplayString | read-only | These options control the PVC management protocol none - No option selected async - The port will send/receive asynchronous A-bit if it is performing Network side protocol functionality nbit - The port will send and accept N-bit messages dbit - The port will send and accept D-bit messages This forces ASYNC to be specified (dbit+async) |
| INT cdx6500frdcepDiscardControlOptions | 1.3.6.1.4.1.449.2.1.2.1.1.6.1.21 | INTEGER | read-only | This parameter controls the discard frame options none - No option selected debit - DE marked frames are discarded before non-DE frames |
| INT cdx6500frdcepElectricalInterfaceType | 1.3.6.1.4.1.449.2.1.2.1.1.6.1.22 | INTEGER | read-only | Specify the Electrical Interface Type: V.24 - V.24 Electrical Interface Type V.35 - V.35 Electrical Interface Type V.36 - V.36 Electrical Interface Type X.21 - X.21 Electrical Interface Type NONE - Electrically disabled |
| INT cdx6500frdcepV24ElectricalInterfaceOption | 1.3.6.1.4.1.449.2.1.2.1.1.6.1.23 | INTEGER | read-only | Specify the Pin 22 option: RI - V.24 uses Pin 22 for Ring Indicator output signal TM - V.24 uses Pin 22 for Test Mode input signal |
| INT cdx6500frdcepHighSpeedElectricalInterfaceOption | 1.3.6.1.4.1.449.2.1.2.1.1.6.1.24 | INTEGER | read-only | Specify the cable type: NONE - V.35/V.36/X.21 DCE with straight through cable XOVER - V.35/V.36/X.21 DCE with crossover adapter cable |
| cdx6500PCTStationProtocolGroup | 1.3.6.1.4.1.449.2.1.2.1.3 | |||
| cdx6500SPCTFRDCEStationTable | 1.3.6.1.4.1.449.2.1.2.1.3.3 | not-accessible | All of the configuration parameters relevant to the Frame Relay DCE Station table. | |
| cdx6500SPCTFRDCEStationEntry | 1.3.6.1.4.1.449.2.1.2.1.3.3.1 | not-accessible | A row of Frame Relay DCE station configuration parameters. | |
| INT cdx6500frdcesCfgPortNum | 1.3.6.1.4.1.449.2.1.2.1.3.3.1.1 | INTEGER | read-only | Station number. |
| INT cdx6500frdcesCfgDLCI | 1.3.6.1.4.1.449.2.1.2.1.3.3.1.2 | INTEGER | read-only | The Data Link Connection Identifier (dlci) is the unique identifier for the station on the FRA Port. Its valid range is 16 - 1007. It must match the DLCI configured on the attached FRAD. |
| STR cdx6500frdcesAutocallMnem | 1.3.6.1.4.1.449.2.1.2.1.3.3.1.3 | DisplayString | read-only | This is the mnemonic name used for auto calling. A blank indicates auto calling is disabled. |
| INT cdx6500frdcesAutocallTimeout | 1.3.6.1.4.1.449.2.1.2.1.3.3.1.4 | INTEGER | read-only | This is the time interval in seconds between call attempts when auto calling. |
| INT cdx6500frdcesMaxAutocalls | 1.3.6.1.4.1.449.2.1.2.1.3.3.1.5 | INTEGER | read-only | This parameter is used to specify the number of times that this FRA station will attempt to call when auto calling is enabled. A value of zero will allow unlimited attempts. |
| INT cdx6500frdcesRemoteConnID | 1.3.6.1.4.1.449.2.1.2.1.3.3.1.6 | INTEGER | read-only | This parameter specifies the number of the remote LAN Connection or the number of the remote FRA station that this FRA station will attempt to connect to if configured for autocall. |
| INT cdx6500frdcesPriority | 1.3.6.1.4.1.449.2.1.2.1.3.3.1.7 | INTEGER | read-only | This parameter specifies the Traffic Priority of this FRA station. newvalLow - same functionality as 'low', new enumeration added for RFC1155 compatibility. |
| INT cdx6500frdcesBillingRecords | 1.3.6.1.4.1.449.2.1.2.1.3.3.1.8 | INTEGER | read-only | This controls whether billing (accounting) records will be created for calls on this FRA station. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compliance. |
| INT cdx6500frdcesStationNum | 1.3.6.1.4.1.449.2.1.2.1.3.3.1.9 | INTEGER | read-only | The number of the logical link on the line. This is the value of Sxx for routing purposes. |
| INT cdx6500frdcesMaxInboundQueue | 1.3.6.1.4.1.449.2.1.2.1.3.3.1.10 | INTEGER | read-only | This specifies the maximum number of frames which may be queued in the station's inbound queue. A smaller value may be choosen for applications which experience objectionable delays, if due to excessive growth of the station's inbound queue. |
| cdx6500Statistics | 1.3.6.1.4.1.449.2.1.3 | |||
| cdx6500StatProtocolGroup | 1.3.6.1.4.1.449.2.1.3.1 | |||
| cdx6500PSTPortProtocolGroup | 1.3.6.1.4.1.449.2.1.3.1.1 | |||
| cdx6500PPSTFRDCEPortTable | 1.3.6.1.4.1.449.2.1.3.1.1.6 | not-accessible | All of the statistics parameters relevant to the Frame Relay DCE Port table. | |
| cdx6500PPSTFRDCEPortEntry | 1.3.6.1.4.1.449.2.1.3.1.1.6.1 | not-accessible | A row of Frame Relay DCE Port statistics parameters. | |
| INT cdx6500frdcepStatsPortNum | 1.3.6.1.4.1.449.2.1.3.1.1.6.1.1 | INTEGER | read-only | Port Number. |
| INT cdx6500frdcepPortStatus | 1.3.6.1.4.1.449.2.1.3.1.1.6.1.2 | INTEGER | read-only | Port Status indicates whether or not the port is switched on and is ready for operation. This value may be one of : up - Port is up and running. down - Port is down. disabled - Port has been disabled. enabled - port has been enabled, but is not yet Up. busyOut - port has been set to be disabled as soon as last active call is disestablished. No new calls will be established. newvalDisabled - same functionality as 'disabled', new enumeration added for RFC1155 compatibility. |
| INT cdx6500frdcepPortSpeed | 1.3.6.1.4.1.449.2.1.3.1.1.6.1.3 | INTEGER | read-only | This is the speed of the port if clock is internal. If clock is external, this is the detected clock speed. If Port Speed is 0, clock is external, but clocking is not being received from attatched device. |
| INT cdx6500frdcepUtilizationIn | 1.3.6.1.4.1.449.2.1.3.1.1.6.1.4 | INTEGER | read-only | Pertcentage of Port input bandwidth in use. |
| INT cdx6500frdcepUtilizationOut | 1.3.6.1.4.1.449.2.1.3.1.1.6.1.5 | INTEGER | read-only | Pertcentage of Port output bandwidth in use. |
| CTR cdx6500frdcepCharInTotal | 1.3.6.1.4.1.449.2.1.3.1.1.6.1.6 | Counter | read-only | Number of message received since last node, port, or statistics reset. |
| CTR cdx6500frdcepCharOutTotal | 1.3.6.1.4.1.449.2.1.3.1.1.6.1.7 | Counter | read-only | Number of message sent since last node, port, or statistics reset. |
| INT cdx6500frdcepCharsInPerSec | 1.3.6.1.4.1.449.2.1.3.1.1.6.1.8 | INTEGER | read-only | Number of characters received per second. |
| INT cdx6500frdcepCharsOutPerSec | 1.3.6.1.4.1.449.2.1.3.1.1.6.1.9 | INTEGER | read-only | Number of characters received per second. |
| CTR cdx6500frdcepFrameInTotal | 1.3.6.1.4.1.449.2.1.3.1.1.6.1.10 | Counter | read-only | Number of frames received since last node, port, or statistics reset. |
| CTR cdx6500frdcepFrameOutTotal | 1.3.6.1.4.1.449.2.1.3.1.1.6.1.11 | Counter | read-only | Number of frames sent since last node, port, or statistics reset. |
| INT cdx6500frdcepFramesInPerSec | 1.3.6.1.4.1.449.2.1.3.1.1.6.1.12 | INTEGER | read-only | Average number of frames received per second during the previous minute |
| INT cdx6500frdcepFramesOutPerSec | 1.3.6.1.4.1.449.2.1.3.1.1.6.1.13 | INTEGER | read-only | Average number of frames transmitted per second during the previous minute |
| NUM cdx6500frdcepOverrunErrors | 1.3.6.1.4.1.449.2.1.3.1.1.6.1.14 | Counter16 | read-only | Total number of overrun errors counted by the I/O driver. |
| NUM cdx6500frdcepUnderrunErrors | 1.3.6.1.4.1.449.2.1.3.1.1.6.1.15 | Counter16 | read-only | Total number of underrun errors counted by the I/O driver. |
| NUM cdx6500frdcepCRCErrors | 1.3.6.1.4.1.449.2.1.3.1.1.6.1.16 | Counter16 | read-only | Total number of CRC errors counted by the I/O driver. |
| cdx6500PSTStationProtocolGroup | 1.3.6.1.4.1.449.2.1.3.1.3 | |||
| cdx6500SPSTFRDCEStationTable | 1.3.6.1.4.1.449.2.1.3.1.3.3 | not-accessible | All of the statistics parameters relevant to the Frame Relay DCE Station (DLCI) table. | |
| cdx6500SPSTFRDCEStationEntry | 1.3.6.1.4.1.449.2.1.3.1.3.3.1 | not-accessible | A row of Frame Relay DCE station (DLCI) Statistics parameters. | |
| INT cdx6500frdcesStatsPortNum | 1.3.6.1.4.1.449.2.1.3.1.3.3.1.1 | INTEGER | read-only | Port Number. |
| INT cdx6500frdcesStatsDLCI | 1.3.6.1.4.1.449.2.1.3.1.3.3.1.2 | INTEGER | read-only | The Data Link Connection Identifier (dlci) is the unique identifier for the station on the FRA Port. |
| INT cdx6500frdcesUtilizationIn | 1.3.6.1.4.1.449.2.1.3.1.3.3.1.3 | INTEGER | read-only | The quantity of user bytes received on the line as a percentage of the maximum number of bytes that could have been received. |
| INT cdx6500frdcesUtilizationOut | 1.3.6.1.4.1.449.2.1.3.1.3.3.1.4 | INTEGER | read-only | The quantity of user bytes sent on the line as a percentage of the maximum number of bytes that could have been received. |
| INT cdx6500frdcesMaxSVCCount | 1.3.6.1.4.1.449.2.1.3.1.3.3.1.5 | INTEGER | read-only | Maximum number of SVCs available in the network. |
| INT cdx6500frdcesCurrentSVCCount | 1.3.6.1.4.1.449.2.1.3.1.3.3.1.6 | INTEGER | read-only | Number of SVCs currently in use. |
| CTR cdx6500frdcesCharInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.3.1.7 | Counter | read-only | Total number of characters received since last node, port, or station boot or statistics reset. |
| CTR cdx6500frdcesCharOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.3.1.8 | Counter | read-only | Total number of characters sent since last node, port, or station boot or statistics reset. |
| INT cdx6500frdcesCharsInPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.3.1.9 | INTEGER | read-only | Average number of characters received per second. |
| INT cdx6500frdcesCharsOutPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.3.1.10 | INTEGER | read-only | Average number of characters transmitted per second. |
| CTR cdx6500frdcesPktInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.3.1.11 | Counter | read-only | Total number of Packets received since last node, port, or station boot or statistics reset. |
| CTR cdx6500frdcesPktOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.3.1.12 | Counter | read-only | Total number of Packets sent since last node, port, or station boot or statistics reset. |
| INT cdx6500frdcesPktsInPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.3.1.13 | INTEGER | read-only | Average number of Packets received per second. |
| INT cdx6500frdcesPktsOutPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.3.1.14 | INTEGER | read-only | Average number of Packets transmitted per second. |
| INT cdx6500frdcesPacketsQueued | 1.3.6.1.4.1.449.2.1.3.1.3.3.1.15 | INTEGER | read-only | Current number of packets buffered since since last node, port, or station boot or statistics reset. |
| CTR cdx6500frdcesFrameInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.3.1.16 | Counter | read-only | Total number of frames received since last node, port, or station boot or statistics reset. |
| CTR cdx6500frdcesFrameOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.3.1.17 | Counter | read-only | Total number of frames sent since last node, port, or station boot or statistics reset. |
| INT cdx6500frdcesFramesInPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.3.1.18 | INTEGER | read-only | Average number of frames received per second. |
| INT cdx6500frdcesFramesOutPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.3.1.19 | INTEGER | read-only | Average number of frames transmitted per second. |
| CTR cdx6500frdcesInfoFramesIn | 1.3.6.1.4.1.449.2.1.3.1.3.3.1.20 | Counter | read-only | Number of data frames received since last node, port, or station boot or statistics reset. |
| CTR cdx6500frdcesInfoFramesOut | 1.3.6.1.4.1.449.2.1.3.1.3.3.1.21 | Counter | read-only | Number of data frames sent since last node, port, or station boot or statistics reset. |
| CTR cdx6500frdcesRNRFramesIn | 1.3.6.1.4.1.449.2.1.3.1.3.3.1.22 | Counter | read-only | Number of RNR frames received since last node, port, or station boot or statistics reset. |
| CTR cdx6500frdcesRNRFramesOut | 1.3.6.1.4.1.449.2.1.3.1.3.3.1.23 | Counter | read-only | Number of RNR frames sent since last node, port, or station boot or statistics reset. |
| CTR cdx6500frdcesRRFramesIn | 1.3.6.1.4.1.449.2.1.3.1.3.3.1.24 | Counter | read-only | Number of RR frames received since last node, port, or station boot or statistics reset. |
| CTR cdx6500frdcesRRFramesOut | 1.3.6.1.4.1.449.2.1.3.1.3.3.1.25 | Counter | read-only | Number of RR frames sent since last node, port, or station boot or statistics reset. |
| CTR cdx6500frdcesREJFramesIn | 1.3.6.1.4.1.449.2.1.3.1.3.3.1.26 | Counter | read-only | Number of REJ frames received since last node, port, or station boot or statistics reset. |
| CTR cdx6500frdcesREJFramesOut | 1.3.6.1.4.1.449.2.1.3.1.3.3.1.27 | Counter | read-only | Number of REJ frames sent since last node, port, or station boot or statistics reset. |
| CTR cdx6500frdcesDataPktsIn | 1.3.6.1.4.1.449.2.1.3.1.3.3.1.28 | Counter | read-only | Number of data packets received since last node, port, or station boot or statistics reset. |
| CTR cdx6500frdcesDataPktsOut | 1.3.6.1.4.1.449.2.1.3.1.3.3.1.29 | Counter | read-only | Number of data packets sent since last node, port, or station boot or statistics reset. |
| INT cdx6500frdcesResetStats | 1.3.6.1.4.1.449.2.1.3.1.3.3.1.30 | INTEGER | write-only | reset : Resets the specified Frame Relay station statistics. noReset : Do not reset the specified Frame Relay station statistics. |
| INT cdx6500frdcesBoot | 1.3.6.1.4.1.449.2.1.3.1.3.3.1.31 | INTEGER | write-only | boot : Boots the specified Frame Relay station. noBoot : Do not boot the specified Frame Relay station. |
| INT cdx6500frdcesDisable | 1.3.6.1.4.1.449.2.1.3.1.3.3.1.32 | INTEGER | write-only | disable : Disables the specified Frame Relay station. noDisable : Do not disable the specified Frame Relay station. |
| INT cdx6500frdcesEnable | 1.3.6.1.4.1.449.2.1.3.1.3.3.1.33 | INTEGER | write-only | enable : Enable the specified Frame Relay station. noEnable : Do not enable the specified Frame Relay station. |
| cdx6500Controls | 1.3.6.1.4.1.449.2.1.4 | |||
| cdx6500ContFRATable | 1.3.6.1.4.1.449.2.1.4.17 | |||
| cdx6500frdcepPContTable | 1.3.6.1.4.1.449.2.1.4.17.1 | not-accessible | Control parameters for FRA ports. | |
| cdx6500frdcepPContEntry | 1.3.6.1.4.1.449.2.1.4.17.1.1 | not-accessible | A row of FRA port control. | |
| INT cdx6500frdcepContPortNumber | 1.3.6.1.4.1.449.2.1.4.17.1.1.1 | INTEGER | not-accessible | Port number of the FRA port. |
| INT cdx6500frdcepContPortControl | 1.3.6.1.4.1.449.2.1.4.17.1.1.2 | INTEGER | write-only | Control operations for the specified FRA port. boot - Boots the FRA port enable - Enables the FRA port disable - Disables the FRA port resetstats - Resets the FRA port statistics. |
| cdx6500frdcesSContTable | 1.3.6.1.4.1.449.2.1.4.17.2 | not-accessible | Control parameter for Fra stations | |
| cdx6500frdcesSContEntry | 1.3.6.1.4.1.449.2.1.4.17.2.1 | not-accessible | A row of FRA Station control | |
| INT cdx6500frdcesStationPortNumber | 1.3.6.1.4.1.449.2.1.4.17.2.1.1 | INTEGER | not-accessible | Fra Station Port number |
| INT cdx6500frdcesStationDLCI | 1.3.6.1.4.1.449.2.1.4.17.2.1.2 | INTEGER | not-accessible | Fra Station DLCI number |
| INT cdx6500frdcesStationControl | 1.3.6.1.4.1.449.2.1.4.17.2.1.3 | INTEGER | write-only | Control operations for the specified FRA station. boot - Boot the FRA station enable - Enables the FRA station disable - Disables the FRA station resetstats - Resets the FRA station statistics. |
RFC description
Frame Relay DCE optional extensions MIB providing network-side management objects for Frame Relay data circuit-terminating equipment interfaces.
Start monitoring Codex CDX-6500 Frame Relay access device (DCE/network side) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.