All MIBs › MICOM-4400-T1E1-MIB
Category: WAN
Description: Tracks T1/E1 line status and performance statistics for Micom 4400 WAN equipment.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is MICOM-4400-T1E1-MIB?
This is a Micom 4400 WAN multiplexer MIB for monitoring T1/E1 digital line status and performance statistics, in the telecom WAN access/multiplexer technology area. It exposes per-line configuration (mcm4400t1e1LineCfgTable) and per-profile framing/line-code settings (mcm4400t1e1ProfCfgTable) covering T1 frame format, T1/E1 line code, idle code, and line build-out. Its role in monitoring hardware/line status centers on mcm4400t1e1SysStatusGroup for overall system status and mcm4400t1e1ChTestResultsGroup for channel test results, letting an operator detect a T1/E1 line in alarm, a failed loopback test, or a misconfigured framing/line-code mismatch causing errors. It complements standard DS1/E1 MIB concepts (similar to RFC-based DS1-MIB), though implemented as a vendor-proprietary Micom extension. It is deployed on Micom 4400 series WAN access multiplexers carrying T1/E1 circuits in legacy telecom/enterprise WAN links, and technicians can download the MICOM-4400-T1E1-MIB file directly to load it into their MIB browser for compilation.
IPNetwork Monitor allows you to monitor SNMP objects defined in MICOM-4400-T1E1-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Micom 4400 WAN multiplexer
- T1/E1 telecom access equipment
Monitoring Examples
An operator would poll mcm4400t1e1LineCfgTable (indexed by mcm4400t1e1LineCfgLineID) to confirm each line's assigned mcm4400t1e1LineCfgProfileNum, then check the corresponding mcm4400t1e1ProfCfgTable entry's mcm4400t1e1ProfCfgT1FrameFmt/T1LineCode or ProfCfgE1LineCode to verify framing matches the far-end equipment. mcm4400t1e1ChTestResultsGroup would be checked after running a loopback test to confirm the T1/E1 channel passed without bit errors.
What Can Be Monitored
- T1/E1 line configuration/profile assignment
- T1 frame format and line code
- E1 line code
- line build-out setting
- system status
- channel test results
This MIB depends on
Related MIBs
Imported Objects
From MICOM-OSCAR-MIB
| micom-oscar |
From MICOM-SYS-MIB
| mcmSysAsciiTimeOfDay | OBJECT-TYPE |
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter |
From SNMPv2-TC
| DisplayString |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| micom_2t1e1 | 1.3.6.1.4.1.335.1.4.22 | |||
| NTF mcm4400T1NoCodeImage | 1.3.6.1.4.1.335.1.4.22.0.1 | NAME = ; DESC = Indicates that the built image doesn't \ contain T1 code.\ Severity Level: MAJOR.; HELP = The Image loaded does not contain T1 code.\ Load a new Image that includes T1 code, or \ consult with the System Admin. or Field \ Personnel.; | ||
| NTF mcm4400T1DownloadFail | 1.3.6.1.4.1.335.1.4.22.0.2 | NAME = ; DESC = Indicates a failure occurred during the T1 \ code download.\ Severity Level: MAJOR; HELP = Retry the download. Re-boot the access device and \ check if it downloads correctly. Also, verify \ the T1 code that is build with access device image \ is the right version. If problem persist, consult \ your system admin., or field personnel.; | ||
| NTF mcm4400T1OutOfOrder | 1.3.6.1.4.1.335.1.4.22.0.3 | NAME = ; DESC = Indicates the T1 is not responding.\ Severity Level: CRITICAL.; HELP = Management frame is out of order. Check for \ Framing error. If it does not recover, Please \ contact your Sys Admin. or Field personnel.; | ||
| NTF mcm4400T1OutOfOrderRecovered | 1.3.6.1.4.1.335.1.4.22.0.4 | NAME = ; DESC = Indicates recovery from the T1 out of order condition.\ Severity Level: INFORMATIVE.; HELP = T1 is responding. Normal Status Indicator.; | ||
| NTF mcm4400T1FailToSyncUp | 1.3.6.1.4.1.335.1.4.22.0.5 | NAME = ; DESC = Indicates the T1 is unable to sync up.\ Severity Level : CRITICAL.; HELP = Check the physical connection locally, and \ to the remote device. Possible protocol error. \ If problem still persist, contact your \ system admin., or field personnel.; | ||
| NTF mcm4400T1FailToSyncUpRecovered | 1.3.6.1.4.1.335.1.4.22.0.6 | NAME = ; DESC = Indicates recovery from the T1 failure \ to sync up condition.\ Severity Level: INFORMATIVE.; HELP = T1 has recovered. Normal Status Indicator.; | ||
| NTF mcm4400T1AISAlarmSet | 1.3.6.1.4.1.335.1.4.22.0.7 | NAME = ; DESC = Indicates a T1 AIS Alarm condition is present.\ Severity Level: CRITICAL.; HELP = Check physical link of the local T1, and the Remote \ PBX. Possible Framing error. If problem is not \ resolved, contact sys admin., or field personnel.; | ||
| NTF mcm4400T1AISAlarmClear | 1.3.6.1.4.1.335.1.4.22.0.8 | NAME = ; DESC = Indicates a T1 AIS Alarm condition has cleared.\ Severity Level: INFORMATIVE.; HELP = T1 AIS Alarm is cleared. Normal Status Indicator.; | ||
| NTF mcm4400T1RedAlarmSet | 1.3.6.1.4.1.335.1.4.22.0.9 | NAME = ; DESC = Indicates a T1 Red Alarm condition is present.\ Severity Level: CRITICAL.; HELP = Check the Physical Connection to remote. \ If the Alarm condition is still persistant, \ contact your Field Personnel.; | ||
| NTF mcm4400T1RedAlarmClear | 1.3.6.1.4.1.335.1.4.22.0.10 | NAME = ; DESC = Indicates a T1 Red Alarm condition has cleared.\ Severity Level: IMFORMATIVE. ; HELP = Red Alarm Cleared. Normal Status Indicator!.; | ||
| NTF mcm4400T1YellowAlarmSet | 1.3.6.1.4.1.335.1.4.22.0.11 | NAME = ; DESC = Indicates a T1 Yellow Alarm condition is present.\ Severity Level: MINOR.; HELP = TX or RX side for physical connection may be faulty; \ Possible Framing error with Remote device. Run Loopback \ test if possible, & determine the problem. If that does not\ help, please contact Field Personnel or System admin.; | ||
| NTF mcm4400T1YellowAlarmClear | 1.3.6.1.4.1.335.1.4.22.0.12 | NAME = ; DESC = Indicates a T1 Yellow Alarm condition has cleared.\ Severity Level: INFORMATIVE.; HELP = Yellow Alarm is cleared. Normal Status Indicator!.; | ||
| NTF mcm4400E1NoCodeImage | 1.3.6.1.4.1.335.1.4.22.0.13 | NAME = ; DESC = Indicates that the built image doesn't \ contain E1 code.\ Severity Level: MAJOR.; HELP = The Image loaded does not contain E1 code.\ Load a new Image that includes E1 code, or \ consult with the System Admin. or Field \ Personnel.; | ||
| NTF mcm4400E1DownloadFail | 1.3.6.1.4.1.335.1.4.22.0.14 | NAME = ; DESC = Indicates a failure occurred during the E1 \ code download.\ Severity Level: MAJOR. ; HELP = Retry the download. Re-boot the access device and \ check if it downloads correctly. Also, verify \ the E1 code that is built with access device \ image is the right version. If problem persist, \ consult your system admin., or field personnel.; | ||
| NTF mcm4400E1OutOfOrder | 1.3.6.1.4.1.335.1.4.22.0.15 | NAME = ; DESC = Indicates the E1 is not responding.\ Severity Level: CRITICAL.; HELP = Management frame is out of order. Check for \ Framing error. If it does not recover, Please \ contact your Sys Admin. or Field personnel.; | ||
| NTF mcm4400E1OutOfOrderRecovered | 1.3.6.1.4.1.335.1.4.22.0.16 | NAME = ; DESC = Indicates recovery from the E1 out of order condition.\ Severity Level: INFORMATIVE.; HELP = E1 is responding. Normal Status Indicator.; | ||
| NTF mcm4400E1FailToSyncUp | 1.3.6.1.4.1.335.1.4.22.0.17 | NAME = ; DESC = Indicates the E1 is unable to sync up.\ Severity Level: CRITICAL.; HELP = Check the physical connection locally, and \ to the remote device. Possible protocol error. \ If problem still persist, contact your \ system admin., or field personnel.; | ||
| NTF mcm4400E1FailToSyncUpRecovered | 1.3.6.1.4.1.335.1.4.22.0.18 | NAME = ; DESC = Indicates recovery from the E1 failure \ to sync up condition.\ Severity Level: INFORMATIVE.; HELP = E1 has recovered. Normal Status Indicator.; | ||
| NTF mcm4400E1AISAlarmSet | 1.3.6.1.4.1.335.1.4.22.0.19 | NAME = ; DESC = Indicates an E1 AIS Alarm condition is present.\ Severity Level: MAJOR.; HELP = Check physical link of the local E1, and the Remote \ PBX. Possible Framing error. If problem is not \ resolved, contact sys admin., or field personnel.; | ||
| NTF mcm4400E1AISAlarmClear | 1.3.6.1.4.1.335.1.4.22.0.20 | NAME = ; DESC = Indicates an E1 AIS Alarm condition has cleared.\ Severity Level: INFORMATIVE. ; HELP = E1 AIS Alarm is cleared. Normal Status Indicator.; | ||
| NTF mcm4400E1RedAlarmSet | 1.3.6.1.4.1.335.1.4.22.0.21 | NAME = ; DESC = Indicates an E1 Red Alarm condition is present.\ Severity Level: MAJOR.; HELP = Check the Physical Connection to remote. \ Run a loopback test and determine the problem. \ If the Alarm condition is still persistant, \ contact your Field Personnel.; | ||
| NTF mcm4400E1RedAlarmClear | 1.3.6.1.4.1.335.1.4.22.0.22 | NAME = ; DESC = Indicates an E1 Red Alarm condition has cleared.\ Severity Level: INFORMATIVE.; HELP = Red Alarm Cleared. Normal Status Indicator!.; | ||
| NTF mcm4400E1TS16AISAlarmSet | 1.3.6.1.4.1.335.1.4.22.0.23 | NAME = ; DESC = Indicates an E1 TS16 AIS Alarm is present.\ Severity Level: MAJOR.; HELP = TX or RX side for physical connection may be faulty; \ Possible Framing error with Remote device. Run Loopback \ test if possible, & determine the problem. If that does not\ help, please contact Field Personnel or System admin.; | ||
| NTF mcm4400E1TS16AISAlarmClear | 1.3.6.1.4.1.335.1.4.22.0.24 | NAME = ; DESC = Indicates an E1 TS16 AIS Alarm has cleared.\ Severity Level: INFORMATIVE.; HELP = Alarm is cleared. Normal Status Indicator!.; | ||
| NTF mcm4400E1OOSMFAlarmSet | 1.3.6.1.4.1.335.1.4.22.0.25 | NAME = ; DESC = Indicates an E1 00SMF Alarm is present.\ Severity Level: MAJOR.; HELP = Framing error due to signal loss. Run Loopback \ test and determine the problem. For further help \ contact your Field Personnel.; | ||
| NTF mcm4400E1OOSMFAlarmClear | 1.3.6.1.4.1.335.1.4.22.0.26 | NAME = ; DESC = Indicates an E1 00SMF Alarm has cleared.\ Severity Level: INFORMATIVE.; HELP = OOSMF Alarm is cleared. Normal Status Indicator!.; | ||
| NTF mcm4400E1RemoteYBitAlarmSet | 1.3.6.1.4.1.335.1.4.22.0.27 | NAME = ; DESC = Indicates an E1 Remote Y Bit Alarm is present.\ Severity Level: MAJOR.; HELP = Run Loopback test, and determine the condition. \ For further help, contact Field Personnel.; | ||
| NTF mcm4400E1RemoteYBitAlarmClear | 1.3.6.1.4.1.335.1.4.22.0.28 | NAME = ; DESC = Indicates an E1 Remote Y Bit Alarm has cleared.\ Severity Level: INFORMATIVE.; HELP = Remote YBit Alarm is cleared. Normal Status \ Indicator.; | ||
| NTF mcm4400E1RemoteABitAlarmSet | 1.3.6.1.4.1.335.1.4.22.0.29 | NAME = ; DESC = Indicates an E1 Remote A Bit Alarm is present.\ Severity Level: MAJOR.; HELP = Possible frame Error. Please run loopback test \ and determine the condition. If Alarm \ is not cleared, contact your Field Personnel.; | ||
| NTF mcm4400E1RemoteABitAlarmClear | 1.3.6.1.4.1.335.1.4.22.0.30 | NAME = ; DESC = Indicates an E1 Remote Y Bit Alarm has cleared.\ Severity Level: INFORMATIVE.; HELP = Alarm is cleared. Normal Status Indicator!.; | ||
| NTF mcm4400E1OOCMFAlarmSet | 1.3.6.1.4.1.335.1.4.22.0.31 | NAME = ; DESC = Indicates an E1 00CMF Alarm is present.\ Severity Level: MAJOR.; HELP = CRC multframe alignment is lost. Run loobback \ test and determine the problem. For further \ help, contact Field Personnel. ; | ||
| NTF mcm4400E1OOCMFAlarmClear | 1.3.6.1.4.1.335.1.4.22.0.32 | NAME = ; DESC = Indicates an E1 00CMF Alarm has cleared.\ Severity Level: INFORMATIVE.; HELP = OOCMF Alarm is cleared. Normal Status Indicator.; | ||
| t1e1_r2_configuration | 1.3.6.1.4.1.335.1.4.22.1 | |||
| mcm4400t1e1LineCfgTable | 1.3.6.1.4.1.335.1.4.22.1.1 | not-accessible | NAME = ; DESC = The T1/E1 Line Configuration table. \ (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| mcm4400t1e1LineCfgEntry | 1.3.6.1.4.1.335.1.4.22.1.1.1 | not-accessible | NAME = ; DESC = An entry in the T1/E1 Line Configuration \ table. (Operational); HELP = ; CAPABILITIES = ; | |
| INT mcm4400t1e1LineCfgLineID | 1.3.6.1.4.1.335.1.4.22.1.1.1.1 | INTEGER | read-only | NAME = ; DESC = The T1/E1 line identification specifies which line \ is to be configured. Used as the index to the \ T1/E1 Line Configuration table. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1LineCfgProfileNum | 1.3.6.1.4.1.335.1.4.22.1.1.1.2 | INTEGER | read-write | NAME = ; DESC = The value of this object indicates the profile \ to be used to configure the specified T1/E1 \ line. (Operational); HELP = 1: expected as default profile for local line. \ 2: expected as default profile for network line.; CAPABILITIES = ; |
| mcm4400t1e1ProfCfgTable | 1.3.6.1.4.1.335.1.4.22.1.2 | not-accessible | NAME = ; DESC = The T1/E1 Profile Configuration table. \ (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| mcm4400t1e1ProfCfgEntry | 1.3.6.1.4.1.335.1.4.22.1.2.1 | not-accessible | NAME = ; DESC = An entry in the T1/E1 Profile Configuration \ table. (Operational); HELP = ; CAPABILITIES = ; | |
| INT mcm4400t1e1ProfCfgProfileNum | 1.3.6.1.4.1.335.1.4.22.1.2.1.1 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the profile \ number. Used as an index to the T1/E1 \ Profile Configuration table. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1ProfCfgT1FrameFmt | 1.3.6.1.4.1.335.1.4.22.1.2.1.2 | INTEGER | read-write | NAME = ; DESC = The value of this object specifies the T1 \ frame format used in the line. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1ProfCfgT1LineCode | 1.3.6.1.4.1.335.1.4.22.1.2.1.3 | INTEGER | read-write | NAME = ; DESC = The value of this object specifies the T1 \ coding format used in the line. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1ProfCfgE1LineCode | 1.3.6.1.4.1.335.1.4.22.1.2.1.4 | INTEGER | read-write | NAME = ; DESC = The value of this object specifies the E1 \ coding format used in the line. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1ProfCfgIdleCode | 1.3.6.1.4.1.335.1.4.22.1.2.1.5 | INTEGER | read-write | NAME = ; DESC = The value of this object specifies the code \ to be filled in the line when idle. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1ProfCfgT1LineBuildOut | 1.3.6.1.4.1.335.1.4.22.1.2.1.6 | INTEGER | read-write | NAME = ; DESC = The value of this object specifies the cable \ length attached to a local T1 line. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1ProfCfgT1Loopback | 1.3.6.1.4.1.335.1.4.22.1.2.1.7 | INTEGER | read-write | NAME = ; DESC = The value of this object specifies whether \ to enable or disable the T1 line loopback \ to be invoked. (Operational); HELP = 1: expected as default for a local T1 line profile. \ 2: expected as default for a network T1 line profile.; CAPABILITIES = ; |
| INT mcm4400t1e1ProfCfgE1CRC4 | 1.3.6.1.4.1.335.1.4.22.1.2.1.8 | INTEGER | read-write | NAME = ; DESC = The value of this object specifies whether \ to enable or disable a T1 line CRC4. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1ProfCfgE1TS16Conn | 1.3.6.1.4.1.335.1.4.22.1.2.1.9 | INTEGER | read-write | NAME = ; DESC = The value of this object specifies where the \ TS16 goes (for a T1 line). (Operational); HELP = ; CAPABILITIES = ; |
| mcm4400t1e1DS0ChConnTable | 1.3.6.1.4.1.335.1.4.22.1.3 | not-accessible | NAME = ; DESC = The T1/E1 DS0 Channel Connection \ Configuration table.(Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| mcm4400t1e1DS0ChConnEntry | 1.3.6.1.4.1.335.1.4.22.1.3.1 | not-accessible | NAME = ; DESC = An entry in the T1/E1 DS0 Channel \ Connection Configuration table. (Operational); HELP = ; CAPABILITIES = ; | |
| INT mcm4400t1e1DS0ChConnLineID | 1.3.6.1.4.1.335.1.4.22.1.3.1.1 | INTEGER | read-only | NAME = ; DESC = The T1/E1 line identification specifies which line \ is to be configured. Used as an index to the \ T1/E1 DS0 Channel Connection Configuration \ table. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1DS0ChConnDS0Index | 1.3.6.1.4.1.335.1.4.22.1.3.1.2 | INTEGER | read-only | NAME = ; DESC = The T1/E1 DS0 index specifies which time slot \ is to be connected. Used as an index to the \ T1/E1 DS0 Channel Connection Configuration \ table. (Operational); HELP = For T1, 24 is the maximum. An error will be \ returned for a T1 DS0 index greater than 24.; CAPABILITIES = ; |
| INT mcm4400t1e1DS0ChConnState | 1.3.6.1.4.1.335.1.4.22.1.3.1.3 | INTEGER | read-write | NAME = ; DESC = The value of this object specifies where the \ T1/E1 line channel slot (DS0) is to be connected \ to. (Operational); HELP = Note 1: if 2-37 is selected, the previous setting \ must be idle, or an error will be returned. \ Note 2: if idle is specified and the previous setting \ was bypass (voice or data), the corresponding DS0 \ in the other line will also be set to idle automatically. \ Note 3: if bypass (voice or data) is specified, the \ corresponding DS0 in the other line will also be \ set to the same bypass mode automatically.; CAPABILITIES = ; |
| mcm4400t1e1DPCfgTable | 1.3.6.1.4.1.335.1.4.22.1.4 | not-accessible | NAME = ; DESC = The T1/E1 Data Port Configuration table. \ (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| mcm4400t1e1DPCfgEntry | 1.3.6.1.4.1.335.1.4.22.1.4.1 | not-accessible | NAME = ; DESC = An entry in the T1/E1 Data Port \ Configuration table. (Operational); HELP = ; CAPABILITIES = ; | |
| INT mcm4400t1e1DPCfgPortNum | 1.3.6.1.4.1.335.1.4.22.1.4.1.1 | INTEGER | read-only | NAME = ; DESC = The T1/E1 port number specifies which data port \ is to be configured. Used as an index to the \ T1/E1 Data Port Configuration table. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1DPCfgDataRate | 1.3.6.1.4.1.335.1.4.22.1.4.1.2 | INTEGER | read-write | NAME = ; DESC = The value of this object selects the baud rate \ for the specified data port. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1DPCfgClock | 1.3.6.1.4.1.335.1.4.22.1.4.1.3 | INTEGER | read-write | NAME = ; DESC = The value of this object selects the clock \ source for the specified data port. \ (Operational); HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1DPCfgDTRCntl | 1.3.6.1.4.1.335.1.4.22.1.4.1.4 | INTEGER | read-write | NAME = ; DESC = The value of this object selects the DTR \ control for the specified data port. \ (Operational); HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1DPCfgRTSCntl | 1.3.6.1.4.1.335.1.4.22.1.4.1.5 | INTEGER | read-write | NAME = ; DESC = The value of this object selects the RTS \ control for the specified data port. \ (Operational); HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1SysCfgClockSource | 1.3.6.1.4.1.335.1.4.22.1.5 | INTEGER | read-write | NAME = ; DESC = The value of this object specifies where the \ system clock comes from. (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; |
| nvm4400t1e1LineCfgTable | 1.3.6.1.4.1.335.1.4.22.1.6 | not-accessible | NAME = ; DESC = The T1/E1 Line Configuration table. \ (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| nvm4400t1e1LineCfgEntry | 1.3.6.1.4.1.335.1.4.22.1.6.1 | not-accessible | NAME = ; DESC = An entry in the T1/E1 Line Configuration \ table. (Configuration); HELP = ; CAPABILITIES = ; | |
| INT nvm4400t1e1LineCfgLineID | 1.3.6.1.4.1.335.1.4.22.1.6.1.1 | INTEGER | read-only | NAME = ; DESC = The T1/E1 line identification specifies which line \ is to be configured. Used as the index to the \ T1/E1 Line Configuration table. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvm4400t1e1LineCfgProfileNum | 1.3.6.1.4.1.335.1.4.22.1.6.1.2 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the profile \ to be used to configure the specified T1/E1 \ line. (Configuration); HELP = 1: expected as default profile for local line. \ 2: expected as default profile for network line.; CAPABILITIES = ; |
| nvm4400t1e1ProfCfgTable | 1.3.6.1.4.1.335.1.4.22.1.7 | not-accessible | NAME = ; DESC = The T1/E1 Profile Configuration table. \ (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| nvm4400t1e1ProfCfgEntry | 1.3.6.1.4.1.335.1.4.22.1.7.1 | not-accessible | NAME = ; DESC = An entry in the T1/E1 Profile Configuration \ table. (Configuration); HELP = ; CAPABILITIES = ; | |
| INT nvm4400t1e1ProfCfgProfileNum | 1.3.6.1.4.1.335.1.4.22.1.7.1.1 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the profile \ number. Used as an index to the T1/E1 \ Profile Configuration table. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvm4400t1e1ProfCfgT1FrameFmt | 1.3.6.1.4.1.335.1.4.22.1.7.1.2 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies the T1 \ frame format used in the line. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvm4400t1e1ProfCfgT1LineCode | 1.3.6.1.4.1.335.1.4.22.1.7.1.3 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies the T1 \ coding format used in the line. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvm4400t1e1ProfCfgE1LineCode | 1.3.6.1.4.1.335.1.4.22.1.7.1.4 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies the E1 \ coding format used in the line. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvm4400t1e1ProfCfgIdleCode | 1.3.6.1.4.1.335.1.4.22.1.7.1.5 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies the code \ to be filled in the line when idle. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvm4400t1e1ProfCfgT1LineBuildOut | 1.3.6.1.4.1.335.1.4.22.1.7.1.6 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies the cable \ length attached to a local T1 line. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvm4400t1e1ProfCfgT1Loopback | 1.3.6.1.4.1.335.1.4.22.1.7.1.7 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies whether \ to enable or disable the T1 line loopback \ to be invoked. (Configuration); HELP = 1: expected as default for a local T1 line profile. \ 2: expected as default for a network T1 line profile.; CAPABILITIES = ; |
| INT nvm4400t1e1ProfCfgE1CRC4 | 1.3.6.1.4.1.335.1.4.22.1.7.1.8 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies whether \ to enable or disable a T1 line CRC4. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvm4400t1e1ProfCfgE1TS16Conn | 1.3.6.1.4.1.335.1.4.22.1.7.1.9 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies where the \ TS16 goes (for a T1 line). (Configuration); HELP = ; CAPABILITIES = ; |
| nvm4400t1e1DS0ChConnTable | 1.3.6.1.4.1.335.1.4.22.1.8 | not-accessible | NAME = ; DESC = The T1/E1 DS0 Channel Connection \ Configuration table.(Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| nvm4400t1e1DS0ChConnEntry | 1.3.6.1.4.1.335.1.4.22.1.8.1 | not-accessible | NAME = ; DESC = An entry in the T1/E1 DS0 Channel \ Connection Configuration table. (Configuration); HELP = ; CAPABILITIES = ; | |
| INT nvm4400t1e1DS0ChConnLineID | 1.3.6.1.4.1.335.1.4.22.1.8.1.1 | INTEGER | read-only | NAME = ; DESC = The T1/E1 line identification specifies which line \ is to be configured. Used as an index to the \ T1/E1 DS0 Channel Connection Configuration \ table. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvm4400t1e1DS0ChConnDS0Index | 1.3.6.1.4.1.335.1.4.22.1.8.1.2 | INTEGER | read-only | NAME = ; DESC = The T1/E1 DS0 index specifies which time slot \ is to be connected. Used as an index to the \ T1/E1 DS0 Channel Connection Configuration \ table. (Configuration); HELP = For T1, 24 is the maximum. An error will be \ returned for a T1 DS0 index greater than 24.; CAPABILITIES = ; |
| INT nvm4400t1e1DS0ChConnState | 1.3.6.1.4.1.335.1.4.22.1.8.1.3 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies where the \ T1/E1 line channel slot (DS0) is to be connected \ to. (Configuration); HELP = Note 1: if 2-37 is selected, the previous setting \ must be idle, or an error will be returned. \ Note 2: if idle is specified and the previous setting \ was bypass (voice or data), the corresponding DS0 \ in the other line will also be set to idle automatically. \ Note 3: if bypass (voice or data) is specified, the \ corresponding DS0 in the other line will also be \ set to the same bypass mode automatically.; CAPABILITIES = ; |
| nvm4400t1e1DPCfgTable | 1.3.6.1.4.1.335.1.4.22.1.9 | not-accessible | NAME = ; DESC = The T1/E1 Data Port Configuration table. \ (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| nvm4400t1e1DPCfgEntry | 1.3.6.1.4.1.335.1.4.22.1.9.1 | not-accessible | NAME = ; DESC = An entry in the T1/E1 Data Port \ Configuration table. (Configuration); HELP = ; CAPABILITIES = ; | |
| INT nvm4400t1e1DPCfgPortNum | 1.3.6.1.4.1.335.1.4.22.1.9.1.1 | INTEGER | read-only | NAME = ; DESC = The T1/E1 port number specifies which data port \ is to be configured. Used as an index to the \ T1/E1 Data Port Configuration table. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvm4400t1e1DPCfgDataRate | 1.3.6.1.4.1.335.1.4.22.1.9.1.2 | INTEGER | read-only | NAME = ; DESC = The value of this object selects the baud rate \ for the specified data port. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvm4400t1e1DPCfgClock | 1.3.6.1.4.1.335.1.4.22.1.9.1.3 | INTEGER | read-only | NAME = ; DESC = The value of this object selects the clock \ source for the specified data port. \ (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvm4400t1e1DPCfgDTRCntl | 1.3.6.1.4.1.335.1.4.22.1.9.1.4 | INTEGER | read-only | NAME = ; DESC = The value of this object selects the DTR \ control for the specified data port. \ (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvm4400t1e1DPCfgRTSCntl | 1.3.6.1.4.1.335.1.4.22.1.9.1.5 | INTEGER | read-only | NAME = ; DESC = The value of this object selects the RTS \ control for the specified data port. \ (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvm4400t1e1SysCfgClockSource | 1.3.6.1.4.1.335.1.4.22.1.10 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies where the \ system clock comes from. (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; |
| t1e1_r2_control | 1.3.6.1.4.1.335.1.4.22.2 | |||
| mcm4400t1e1DS0ChTestCmdTable | 1.3.6.1.4.1.335.1.4.22.2.1 | not-accessible | NAME = ; DESC = The T1/E1 DS0 Channel Test Command \ table. \ HELP = ; CAPABILITIES = NET_OPER, VPN_OPER ; | |
| mcm4400t1e1DS0ChTestCmdEntry | 1.3.6.1.4.1.335.1.4.22.2.1.1 | not-accessible | NAME = ; DESC = An entry in the T1/E1 DS0 Channel \ Test Command table.; HELP = ; CAPABILITIES = ; | |
| INT mcm4400t1e1DS0ChTestCmdLineID | 1.3.6.1.4.1.335.1.4.22.2.1.1.1 | INTEGER | read-only | NAME = ; DESC = The T1/E1 line ID specifies which line is to \ be tested. Used as an index to the \ T1/E1 DS0 Channel Test Command table.; HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1DS0ChTestCmdDS0Index | 1.3.6.1.4.1.335.1.4.22.2.1.1.2 | INTEGER | read-only | NAME = ; DESC = The DS0 Index specifies which time slot is \ to be tested. Used as an index to the \ T1/E1 DS0 Channel Test Command table.; HELP = For T1, 24 is the maximum. An error will be \ returned if a value greater than 24 is selected.; CAPABILITIES = ; |
| INT mcm4400t1e1DS0ChTestCmdTstPattern | 1.3.6.1.4.1.335.1.4.22.2.1.1.3 | INTEGER | write-only | NAME = ; DESC = Setting this object will initiate various \ test pattern testing on the specified T1/E1 \ DS0 channel.; HELP = For QRSS, TP511, and Fixed, the T1/E1 \ access module will generate and verify the \ selected test pattern. \ For Loop test, it simply loops the input \ data back to the same DS0 channel. \ In T1, if 4 is specified, an error will be \ returned.; CAPABILITIES = ; |
| mcm4400t1e1LineTestCmdTable | 1.3.6.1.4.1.335.1.4.22.2.2 | not-accessible | NAME = ; DESC = The T1/E1 Line Test Command \ table. \ HELP = ; CAPABILITIES = NET_OPER, VPN_OPER ; | |
| mcm4400t1e1LineTestCmdEntry | 1.3.6.1.4.1.335.1.4.22.2.2.1 | not-accessible | NAME = ; DESC = An entry in the T1/E1 Line Test \ Command table.; HELP = ; CAPABILITIES = ; | |
| INT mcm4400t1e1LineTestCmdLineID | 1.3.6.1.4.1.335.1.4.22.2.2.1.1 | INTEGER | read-only | NAME = ; DESC = The T1/E1 line ID specifies which line is to \ be tested. Used as the index to the \ T1/E1 Line Test Command table.; HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1LineTestCmdTstPattern | 1.3.6.1.4.1.335.1.4.22.2.2.1.2 | INTEGER | write-only | NAME = ; DESC = Setting this object will initiate various \ tests on the specified T1/E1 line.; HELP = Line Loopback: receiver or transmitter is \ connected to transmitter or receiver; respectively. \ Digital Loopback: data is stripped off the \ DS0 channel and reinserted in the same channel. \ External: data coming from the line. \ Internal: data going to the line.; CAPABILITIES = ; |
| mcm4400t1e1DPTestCmdTable | 1.3.6.1.4.1.335.1.4.22.2.3 | not-accessible | NAME = ; DESC = The T1/E1 Data Port Test Command \ table. \ HELP = ; CAPABILITIES = NET_OPER, VPN_OPER ; | |
| mcm4400t1e1DPTestCmdEntry | 1.3.6.1.4.1.335.1.4.22.2.3.1 | not-accessible | NAME = ; DESC = An entry in the T1/E1 Data Port \ Test Command table.; HELP = ; CAPABILITIES = ; | |
| INT mcm4400t1e1DPTestCmdPortNum | 1.3.6.1.4.1.335.1.4.22.2.3.1.1 | INTEGER | read-only | NAME = ; DESC = The T1/E1 Port Number specifies which data \ port is to be tested. Used as the index to the \ T1/E1 Data Port Test Command table.; HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1DPTestCmdTstPattern | 1.3.6.1.4.1.335.1.4.22.2.3.1.2 | INTEGER | write-only | NAME = ; DESC = Setting this object will initiate various \ tests on the specified T1/E1 data port.; HELP = External: loop back data coming from the \ device attached to the port. \ Internal: loop back data coming from the \ DS0 channel.; CAPABILITIES = ; |
| INT mcm4400t1e1SysControlActionCmd | 1.3.6.1.4.1.335.1.4.22.2.4 | INTEGER | write-only | NAME = ; DESC = Setting this object will perform various \ actions on the T1/E1 system. \ Note: Starting with software release 3.0, \ the enumeration clearCounter (3) is \ not supported. The enumeration is included \ here only to support backwards compatibility \ for software versions prior to release 3.0.; HELP = 1: initiate LED test. \ 2: reset T1/E1 module. \ 3: clear statistics counters. \ 4: download code. \ 5: stop DS0 channel test. \ 6: stop line test. \ 7: stop port test. \ 8: stop LED test. \ 9: stop all tests.; CAPABILITIES = NET_OPER, VPN_OPER ; |
| t1e1_r2_status | 1.3.6.1.4.1.335.1.4.22.3 | |||
| mcm4400t1e1LineStatusTable | 1.3.6.1.4.1.335.1.4.22.3.1 | not-accessible | NAME = ; DESC = The T1/E1 Line Status Display table. \ HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| mcm4400t1e1LineStatusEntry | 1.3.6.1.4.1.335.1.4.22.3.1.1 | not-accessible | NAME = ; DESC = An entry in the T1/E1 Line Status Display \ table.; HELP = ; CAPABILITIES = ; | |
| INT mcm4400t1e1LineStatusLineIndex | 1.3.6.1.4.1.335.1.4.22.3.1.1.1 | INTEGER | read-only | NAME = ; DESC = The T1/E1 line index specifies which line is to \ be displayed. Used as an index to the \ T1/E1 Line Status Display table.; HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1LineStatusInterface | 1.3.6.1.4.1.335.1.4.22.3.1.1.2 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the interface \ type as either T1 or E1 for the \ T1/E1 Line Status Display table.; HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1LineStatusImpedance | 1.3.6.1.4.1.335.1.4.22.3.1.1.3 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the impedance \ for the specified line.; HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1LineStatusTestMode | 1.3.6.1.4.1.335.1.4.22.3.1.1.4 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates if the specified \ line is in a loopback test mode.; HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1LineStatusTestingDS0Ch | 1.3.6.1.4.1.335.1.4.22.3.1.1.5 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates which DS0 \ channel is in channel loopback or channel pattern \ test mode now.; HELP = 0: none.\ 1-30: DS0 channel number.; CAPABILITIES = ; |
| INT mcm4400t1e1LineStatusAISAlarm | 1.3.6.1.4.1.335.1.4.22.3.1.1.6 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates if the AIS \ (Alarm Indication Signal) alarm is preset for \ the specified line.; HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1LineStatusRedAlarm | 1.3.6.1.4.1.335.1.4.22.3.1.1.7 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates if the Red \ alarm is preset for the specified line.; HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1LineStatusYellowAlarm | 1.3.6.1.4.1.335.1.4.22.3.1.1.8 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates if the Yellow \ alarm is preset for the specified line. (Not \ applicable in E1.) ; HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1LineStatusTS16AIS | 1.3.6.1.4.1.335.1.4.22.3.1.1.9 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates if the TS16 \ (Time Slot 16) AIS alarm is preset for the \ specified line. (Not applicable in T1.) ; HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1LineStatusOOSMFAlarm | 1.3.6.1.4.1.335.1.4.22.3.1.1.10 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates if the \ OOSMF (Out Of Signal Multi-Frame) alarm \ is preset for the specified line. (Not \ applicable in T1.) ; HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1LineStatusMFASAlarm | 1.3.6.1.4.1.335.1.4.22.3.1.1.11 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates if the \ MFAS (Multi-Frame Alignment Signal - \ Y bit) alarm is preset for the specified line. \ (Not applicable in T1.) ; HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1LineStatusFASAlarm | 1.3.6.1.4.1.335.1.4.22.3.1.1.12 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates if the \ FAS (Frame Alignment Signal - A bit) \ alarm is preset for the specified line. \ (Not applicable in T1.) ; HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1LineStatusOOCMFAlarm | 1.3.6.1.4.1.335.1.4.22.3.1.1.13 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates if the \ OOCMF (Out Of CRC Multi-Frame) \ alarm is preset for the specified line. \ (Not applicable in T1.) ; HELP = ; CAPABILITIES = ; |
| mcm4400t1e1SysStatusGroup | 1.3.6.1.4.1.335.1.4.22.3.2 | |||
| INT mcm4400t1e1SysStatusCardType | 1.3.6.1.4.1.335.1.4.22.3.2.1 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the T1/E1 \ card type.; HELP = 1: TAM1 - network line only. \ 2: TAM2 - both local and network lines. \ 3: EAM1 - network line only. \ 4: EAM2 - both local and network lines.; CAPABILITIES = NET_CFG, VPN_CFG ; |
| INT mcm4400t1e1SysStatusOperStatus | 1.3.6.1.4.1.335.1.4.22.3.2.2 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the operation \ status of the T1/E1 control unit.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG ; |
| INT mcm4400t1e1SysStatusLEDTest | 1.3.6.1.4.1.335.1.4.22.3.2.3 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies if the \ LED test is in progress.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG ; |
| INT mcm4400t1e1SysStatusSelfTestResults | 1.3.6.1.4.1.335.1.4.22.3.2.4 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies the \ results of the T1/E1 self test.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG ; |
| INT mcm4400t1e1SysStatusFlashEPROMSt | 1.3.6.1.4.1.335.1.4.22.3.2.5 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies the current \ state of the flash EPROM in the T1/E1 \ access board.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG ; |
| STR mcm4400t1e1SysStatusApplSwID | 1.3.6.1.4.1.335.1.4.22.3.2.6 | DisplayString | read-only | NAME = ; DESC = The value of this object indicates the T1/E1 \ application software ID (Null terminated string).; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG ; |
| STR mcm4400t1e1SysStatusBootSwVer | 1.3.6.1.4.1.335.1.4.22.3.2.7 | DisplayString | read-only | NAME = ; DESC = The value of this object indicates the T1/E1 \ software version (Null terminated string).; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG ; |
| mcm4400t1e1DPStatusTable | 1.3.6.1.4.1.335.1.4.22.3.3 | not-accessible | NAME = ; DESC = The T1/E1 Data Port Status Display table. \ HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| mcm4400t1e1DPStatusEntry | 1.3.6.1.4.1.335.1.4.22.3.3.1 | not-accessible | NAME = ; DESC = An entry in the T1/E1 Data Port Status \ Display table.; HELP = ; CAPABILITIES = ; | |
| INT mcm4400t1e1DPStatusPortNumber | 1.3.6.1.4.1.335.1.4.22.3.3.1.1 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies the data port \ number. Used as the index to the T1/E1 \ Data Port Status Display table.; HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1DPStatusDTRInputSt | 1.3.6.1.4.1.335.1.4.22.3.3.1.2 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the current \ DTR state for the specified data port.; HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1DPStatusRTSInputSt | 1.3.6.1.4.1.335.1.4.22.3.3.1.3 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the current \ RTS state for the specified data port.; HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1DPStatusDSROutputSt | 1.3.6.1.4.1.335.1.4.22.3.3.1.4 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the current \ DSR state for the specified data port.; HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1DPStatusDCDOutputSt | 1.3.6.1.4.1.335.1.4.22.3.3.1.5 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the current \ DCD state for the specified data port.; HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1DPStatusCTSOutputSt | 1.3.6.1.4.1.335.1.4.22.3.3.1.6 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the current \ CTS state for the specified data port.; HELP = ; CAPABILITIES = ; |
| mcm4400t1e1DS0ChSigTable | 1.3.6.1.4.1.335.1.4.22.3.4 | not-accessible | NAME = ; DESC = The T1/E1 DS0 Channel Signaling Display \ table. \ HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| mcm4400t1e1DS0ChSigEntry | 1.3.6.1.4.1.335.1.4.22.3.4.1 | not-accessible | NAME = ; DESC = An entry in the T1/E1 DS0 Channel \ Signaling Display table.; HELP = ; CAPABILITIES = ; | |
| INT mcm4400t1e1DS0ChSigLineID | 1.3.6.1.4.1.335.1.4.22.3.4.1.1 | INTEGER | read-only | NAME = ; DESC = The T1/E1 line ID specifies which line is to \ be displayed. Used as an index to the \ T1/E1 DS0 Channel Signaling Display table.; HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1DS0ChSigDS0Index | 1.3.6.1.4.1.335.1.4.22.3.4.1.2 | INTEGER | read-only | NAME = ; DESC = The DS0 Index specifies which time slot is \ to be displayed. Used as an index to the \ T1/E1 DS0 Channel Signaling Display table.; HELP = For T1, 24 is the maximum. An error will be \ returned if a value greater than 24 is selected.; CAPABILITIES = ; |
| INT mcm4400t1e1DS0ChSigInABCDBits | 1.3.6.1.4.1.335.1.4.22.3.4.1.3 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the input \ ABCD bit pattern.; HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1DS0ChSigOutABCDBits | 1.3.6.1.4.1.335.1.4.22.3.4.1.4 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the output \ ABCD bit pattern.; HELP = ; CAPABILITIES = ; |
| mcm4400t1e1ChTestResultsGroup | 1.3.6.1.4.1.335.1.4.22.3.5 | |||
| INT mcm4400t1e1ChTestResultsLineID | 1.3.6.1.4.1.335.1.4.22.3.5.1 | INTEGER | read-only | NAME = ; DESC = The line ID specifies which T1/E1 line has \ a DS0channel in test mode.; HELP = 3 is returned if no DS0 channel is in test mode.; CAPABILITIES = NET_CFG, VPN_CFG ; |
| INT mcm4400t1e1ChTestResultsDS0Ch | 1.3.6.1.4.1.335.1.4.22.3.5.2 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies which DS0 \ channel is in test mode.; HELP = For T1, 24 is the maximum. Also, 0 will be \ returned if no DS0 channels are in test mode.; CAPABILITIES = NET_CFG, VPN_CFG ; |
| CTR mcm4400t1e1ChTestResultsErrorCnt | 1.3.6.1.4.1.335.1.4.22.3.5.3 | Counter | read-only | NAME = ; DESC = The value of this object indicates the number \ of errors accumulated since the test had been \ started.; HELP = An error can be detected only when in channel \ pattern test mode. Channel loopback will always \ be 0.; CAPABILITIES = NET_CFG, VPN_CFG ; |
| t1e1_r2_statistics | 1.3.6.1.4.1.335.1.4.22.4 | |||
| mcm4400t1e1LineStatsTable | 1.3.6.1.4.1.335.1.4.22.4.1 | not-accessible | NAME = ; DESC = The T1/E1 Line Statistics Display table. \ HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| mcm4400t1e1LineStatsEntry | 1.3.6.1.4.1.335.1.4.22.4.1.1 | not-accessible | NAME = ; DESC = An entry in the T1/E1 Line Statistics \ Display table.; HELP = ; CAPABILITIES = ; | |
| INT mcm4400t1e1LineStatsLineIndex | 1.3.6.1.4.1.335.1.4.22.4.1.1.1 | INTEGER | read-only | NAME = ; DESC = The T1/E1 line index specifies which line is to \ be displayed. Used as an index to the \ T1/E1 Line Statistics Display table.; HELP = ; CAPABILITIES = ; |
| INT mcm4400t1e1LineStatsInterface | 1.3.6.1.4.1.335.1.4.22.4.1.1.2 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the interface \ type as either T1 or E1 for the \ T1/E1 Line Statistics Display table.; HELP = ; CAPABILITIES = ; |
| CTR mcm4400t1e1LineStatsFramingBitError | 1.3.6.1.4.1.335.1.4.22.4.1.1.3 | Counter | read-only | NAME = ; DESC = The value of this object indicates the framing \ bit errors on the specified line.; HELP = Valid for E1 only. For T1, 0 will be returned.; CAPABILITIES = ; |
| CTR mcm4400t1e1LineStatsLineCdViolation | 1.3.6.1.4.1.335.1.4.22.4.1.1.4 | Counter | read-only | NAME = ; DESC = The value of this object indicates the line \ code violations on the specified line.; HELP = ; CAPABILITIES = ; |
| CTR mcm4400t1e1LineStatsFarEndBlkError | 1.3.6.1.4.1.335.1.4.22.4.1.1.5 | Counter | read-only | NAME = ; DESC = The value of this object indicates the far \ end block errors on the specified line.; HELP = Valid for E1 only. For T1, 0 will be returned.; CAPABILITIES = ; |
| CTR mcm4400t1e1LineStatsCRCError | 1.3.6.1.4.1.335.1.4.22.4.1.1.6 | Counter | read-only | NAME = ; DESC = The value of this object indicates the CRC \ errors on the specified line.; HELP = Valid for E1 only. For T1, 0 will be returned.; CAPABILITIES = ; |
| CTR mcm4400t1e1LineStatsBufferOverrun | 1.3.6.1.4.1.335.1.4.22.4.1.1.7 | Counter | read-only | NAME = ; DESC = The value of this object indicates the \ buffer overruns on the specified line.; HELP = Valid for E1 only. For T1, 0 will be returned.; CAPABILITIES = ; |
| CTR mcm4400t1e1LineStatsBufferUnderrun | 1.3.6.1.4.1.335.1.4.22.4.1.1.8 | Counter | read-only | NAME = ; DESC = The value of this object indicates the \ buffer underruns on the specified line.; HELP = Valid for E1 only. For T1, 0 will be returned.; CAPABILITIES = ; |
| CTR mcm4400t1e1LineStatsFrmSyncBitError | 1.3.6.1.4.1.335.1.4.22.4.1.1.9 | Counter | read-only | NAME = ; DESC = The value of this object indicates the frame \ synchronization bit errors on the specified line.; HELP = Valid for T1 only. For E1, 0 will be returned.; CAPABILITIES = ; |
| CTR mcm4400t1e1LineStatsOutOfFrame | 1.3.6.1.4.1.335.1.4.22.4.1.1.10 | Counter | read-only | NAME = ; DESC = The value of this object indicates the out of \ frame statistics on the specified line.; HELP = Valid for T1 only. For E1, 0 will be returned.; CAPABILITIES = ; |
| CTR mcm4400t1e1LineStatsTotalFrameSlip | 1.3.6.1.4.1.335.1.4.22.4.1.1.11 | Counter | read-only | NAME = ; DESC = The value of this object indicates the total \ frame slips on the specified line.; HELP = Valid for T1 only. For E1, 0 will be returned.; CAPABILITIES = ; |
RFC description
Monitors T1/E1 line status and performance statistics on Micom 4400 WAN equipment.
Start monitoring Micom 4400 WAN multiplexer (T1/E1 line status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.