All MIBs › MICOM-4400-T1E1-MIB › mcm4400t1e1DS0ChConnState
mcm4400t1e1DS0ChConnState
Module: MICOM-4400-T1E1-MIB
OID (symbolic): MICOM-4400-T1E1-MIB::mcm4400t1e1DS0ChConnState
OID (numeric): 1.3.6.1.4.1.335.1.4.22.1.3.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: NAME = ; DESC = The value of this object specifies where the \ T1/E1 line channel slot (DS0) is to be connected \ to. (Operational); HELP = Note 1: if 2-37 is selected, the previous setting \ must be idle, or an error will be returned. \ Note 2: if idle is specified and the previous setting \ was bypass (voice or data), the corresponding DS0 \ in the other line will also be set to idle automatically. \ Note 3: if bypass (voice or data) is specified, the \ corresponding DS0 in the other line will also be \ set to the same bypass mode automatically.; CAPABILITIES = ;
What is mcm4400t1e1DS0ChConnState?
Sets where this DS0 timeslot's traffic is routed: left idle, bypassed as voice or data, sent to a WAN or data port, or cross-connected to one of many DVM channel slots. Admins use this to build up voice/data cross-connect maps DS0-by-DS0, keeping in mind that changing a bypass connection also automatically updates the paired DS0 on the other line.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.335.1.4.22.1.3.1.3 snmpwalk -v2c -c public <target> MICOM-4400-T1E1-MIB::mcm4400t1e1DS0ChConnState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.335.1.4.22.1.3.1.3.1 snmpget -v2c -c public <target> MICOM-4400-T1E1-MIB::mcm4400t1e1DS0ChConnState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.335.1.4.22.1.3.1.3.1 i <value>
Start monitoring Micom 4400 WAN multiplexer (T1/E1 line status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MICOM-4400-T1E1-MIB::mcm4400t1e1DS0ChConnState OID value, configure state conditions and alerts, and monitor any Micom 4400 WAN multiplexer (T1/E1 line status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.335 | micom | MICOM-OSCAR-MIB |
| 1.3.6.1.4.1.335.1 | products | MICOM-OSCAR-MIB |
| 1.3.6.1.4.1.335.1.4 | micom_oscar | MICOM-OSCAR-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.335.1.4.22 | micom_2t1e1 | MICOM-4400-T1E1-MIB |
| 1.3.6.1.4.1.335.1.4.22.1 | t1e1_r2_configuration | MICOM-4400-T1E1-MIB |
| 1.3.6.1.4.1.335.1.4.22.1.3 | mcm4400t1e1DS0ChConnTable | MICOM-4400-T1E1-MIB |
| 1.3.6.1.4.1.335.1.4.22.1.3.1 | mcm4400t1e1DS0ChConnEntry | MICOM-4400-T1E1-MIB |
| 1.3.6.1.4.1.335.1.4.22.1.3.1.3 | mcm4400t1e1DS0ChConnState | MICOM-4400-T1E1-MIB |