ME1200-PORT-MIB

All MIBs › ME1200-PORT-MIB

Organization: Cisco Systems, Inc

Last Updated: 2016-05-23

Category: Switch Management

Description: Manages physical port configuration and status on Cisco ME1200 Metro Ethernet switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ME1200-PORT-MIB?

ME1200-PORT-MIB is a Cisco private MIB for the ME1200 Metro Ethernet switch that manages physical port configuration and operational status. It exposes per-port configuration data such as administrative shutdown state, speed, duplex, media type, flow control, and MTU, alongside a companion port information/status table. This MIB is heavily used for hardware status monitoring, tracking whether a port is administratively shut down versus faulted, verifying negotiated speed/duplex against expectations, and watching the excessive-restart counter that flags a flapping link caused by a bad cable or transceiver. It complements the standard IF-MIB by adding these vendor-specific port attributes, indexed consistently by ifIndex. It is deployed for routine port-level health monitoring on any ME1200 switch in metro access deployments. Engineers can download the ME1200-PORT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ME1200-PORT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco ME1200 Metro Ethernet switch

Monitoring Examples

Polling me1200PortConfigTable via me1200PortConfigIfIndex reads me1200PortConfigSpeed, me1200PortConfigDuplex, and me1200PortConfigMediaType against expected values. A rising me1200PortConfigExcessiveRestart counter signals a flapping or unstable link, often a failing SFP or cable. Cross-checking me1200PortConfigShutdown against me1200PortInformationTable confirms whether a down port is intentionally administratively disabled versus genuinely faulted.

What Can Be Monitored

port admin shutdown state
negotiated speed and duplex
media type per port
flow control setting
MTU size
excessive restart/link flap count

Imported Objects

From CISCOME1200-MIB

me1200SwitchMgmt

OBJECT-IDENTITY

From ME1200-TC

ME1200DisplayString
ME1200InterfaceIndex
ME1200Unsigned8

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using me1200PortRmonStatisticsRxDropEvents OID:

Select a Cisco ME1200 Metro Ethernet switch (physical port config/status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type me1200PortRmonStatisticsRxDropEvents into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. Shows the number of frames discarded due to ingress congestion. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases between polls, since a rising count of errors, failures, or discards often points to a real underlying problem. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
me1200PortBridgeStatisticsEntry	1.3.6.1.4.1.9.9.815.1.11.1.3.2.5.1		not-accessible	Each port interface has a set of statistics counters
NUM me1200PortBridgeStatisticsIfIndex	1.3.6.1.4.1.9.9.815.1.11.1.3.2.5.1.1	ME1200InterfaceIndex	not-accessible	Logical interface number.
C64 me1200PortBridgeStatisticsRxBridgeDiscard	1.3.6.1.4.1.9.9.815.1.11.1.3.2.5.1.2	Counter64	read-only	The number of bridge frames discarded.
me1200PortBridgeStatisticsTable	1.3.6.1.4.1.9.9.815.1.11.1.3.2.5		not-accessible	This table represents the port interface bridge counters
me1200PortBridgeStatisticsTableInfoGroup	1.3.6.1.4.1.9.9.815.1.11.3.2.7			A collection of objects suitable for bulk operations.
me1200PortConfig	1.3.6.1.4.1.9.9.815.1.11.1.2
ME1 me1200PortConfigDuplex	1.3.6.1.4.1.9.9.815.1.11.1.2.1.1.5	ME1200PortDuplex	read-write	Controls the port duplex. For setting duplex auto-negotiation it is require that the port speed is set in auto-negotiation mode first. It is only possible to set duplex to half duplex if the port speed is either set to 10Mbit or 100Mbit forced speed.
me1200PortConfigEntry	1.3.6.1.4.1.9.9.815.1.11.1.2.1.1		not-accessible	Each port interface has a set of parameters
T/F me1200PortConfigExcessiveRestart	1.3.6.1.4.1.9.9.815.1.11.1.2.1.1.8	TruthValue	read-write	TRUE to restart half-duplex back-off algorithm after 16 collisions. FALSE to discard frame after 16 collisions
ME1 me1200PortConfigFC	1.3.6.1.4.1.9.9.815.1.11.1.2.1.1.6	ME1200PortFc	read-write	Controls the port flow control mode.
NUM me1200PortConfigIfIndex	1.3.6.1.4.1.9.9.815.1.11.1.2.1.1.1	ME1200InterfaceIndex	not-accessible	Logical interface number.
me1200PortConfigInfoGroup	1.3.6.1.4.1.9.9.815.1.11.3.2.1			A collection of objects suitable for bulk operations.
ME1 me1200PortConfigMediaType	1.3.6.1.4.1.9.9.815.1.11.1.2.1.1.4	ME1200PortMedia	read-write	Controls the port media type.
U32 me1200PortConfigMTU	1.3.6.1.4.1.9.9.815.1.11.1.2.1.1.7	Unsigned32	read-write	Controls the port's Maximum Transmission Unit.
T/F me1200PortConfigShutdown	1.3.6.1.4.1.9.9.815.1.11.1.2.1.1.2	TruthValue	read-write	Controls whether interface is shutdown or powered up. Set to TRUE in order to power down the interface.
ME1 me1200PortConfigSpeed	1.3.6.1.4.1.9.9.815.1.11.1.2.1.1.3	ME1200PortSpeed	read-write	Controls the port speed.
me1200PortConfigTable	1.3.6.1.4.1.9.9.815.1.11.1.2.1		not-accessible	This is a table of the port interface parameters
me1200PortControl	1.3.6.1.4.1.9.9.815.1.11.1.4
me1200PortEthernetLikeStatisticsEntry	1.3.6.1.4.1.9.9.815.1.11.1.3.2.3.1		not-accessible	Each port interface has a set of statistics counters
NUM me1200PortEthernetLikeStatisticsIfIndex	1.3.6.1.4.1.9.9.815.1.11.1.3.2.3.1.1	ME1200InterfaceIndex	not-accessible	Logical interface number.
C64 me1200PortEthernetLikeStatisticsRxPauseFrames	1.3.6.1.4.1.9.9.815.1.11.1.3.2.3.1.2	Counter64	read-only	The number of pause frames received.
me1200PortEthernetLikeStatisticsTable	1.3.6.1.4.1.9.9.815.1.11.1.3.2.3		not-accessible	This table represents the port Ethernet-like interfaces counters
me1200PortEthernetLikeStatisticsTableInfoGroup	1.3.6.1.4.1.9.9.815.1.11.3.2.5			A collection of objects suitable for bulk operations.
C64 me1200PortEthernetLikeStatisticsTxPauseFrames	1.3.6.1.4.1.9.9.815.1.11.1.3.2.3.1.3	Counter64	read-only	The number of pause frames transmitted.
me1200PortIfGroupStatisticsEntry	1.3.6.1.4.1.9.9.815.1.11.1.3.2.2.1		not-accessible	Each port interface has a set of statistics counters
NUM me1200PortIfGroupStatisticsIfIndex	1.3.6.1.4.1.9.9.815.1.11.1.3.2.2.1.1	ME1200InterfaceIndex	not-accessible	Logical interface number.
C64 me1200PortIfGroupStatisticsRxBroadcastPkts	1.3.6.1.4.1.9.9.815.1.11.1.3.2.2.1.5	Counter64	read-only	Shows the number of broad-cast frames received.
C64 me1200PortIfGroupStatisticsRxDiscards	1.3.6.1.4.1.9.9.815.1.11.1.3.2.2.1.7	Counter64	read-only	Shows the number of received frames discarded.
C64 me1200PortIfGroupStatisticsRxErrors	1.3.6.1.4.1.9.9.815.1.11.1.3.2.2.1.8	Counter64	read-only	Shows the number of frames with errors received.
C64 me1200PortIfGroupStatisticsRxMulticastPkts	1.3.6.1.4.1.9.9.815.1.11.1.3.2.2.1.4	Counter64	read-only	Shows the number of multi-cast frames received.
C64 me1200PortIfGroupStatisticsRxNonUnicastPkts	1.3.6.1.4.1.9.9.815.1.11.1.3.2.2.1.6	Counter64	read-only	Shows the number of non uni-cast frames received.
C64 me1200PortIfGroupStatisticsRxOctets	1.3.6.1.4.1.9.9.815.1.11.1.3.2.2.1.2	Counter64	read-only	Shows the number of bytes received.
C64 me1200PortIfGroupStatisticsRxUnicastPkts	1.3.6.1.4.1.9.9.815.1.11.1.3.2.2.1.3	Counter64	read-only	Shows the number of uni-cast frames received.
me1200PortIfGroupStatisticsTable	1.3.6.1.4.1.9.9.815.1.11.1.3.2.2		not-accessible	This table represents the port interfaces group (RFC 2863) counters
me1200PortIfGroupStatisticsTableInfoGroup	1.3.6.1.4.1.9.9.815.1.11.3.2.4			A collection of objects suitable for bulk operations.
C64 me1200PortIfGroupStatisticsTxBroadcastPkts	1.3.6.1.4.1.9.9.815.1.11.1.3.2.2.1.12	Counter64	read-only	Shows the number of broad-cast frames transmitted.
C64 me1200PortIfGroupStatisticsTxDiscardPkts	1.3.6.1.4.1.9.9.815.1.11.1.3.2.2.1.14	Counter64	read-only	Shows the number of discard frames which should been transmitted.
C64 me1200PortIfGroupStatisticsTxErrorPkts	1.3.6.1.4.1.9.9.815.1.11.1.3.2.2.1.15	Counter64	read-only	Shows the number of frames transmit with error.
C64 me1200PortIfGroupStatisticsTxMulticastPkts	1.3.6.1.4.1.9.9.815.1.11.1.3.2.2.1.11	Counter64	read-only	Shows the number of multi-cast frames transmitted.
C64 me1200PortIfGroupStatisticsTxNonUnicastPkts	1.3.6.1.4.1.9.9.815.1.11.1.3.2.2.1.13	Counter64	read-only	Shows the number of non uni-cast frames transmitted.
C64 me1200PortIfGroupStatisticsTxOctets	1.3.6.1.4.1.9.9.815.1.11.1.3.2.2.1.9	Counter64	read-only	Shows the number of bytes transmitted.
C64 me1200PortIfGroupStatisticsTxUnicastPkts	1.3.6.1.4.1.9.9.815.1.11.1.3.2.2.1.10	Counter64	read-only	Shows the number of uni-cast frames transmitted.
me1200PortInformationEntry	1.3.6.1.4.1.9.9.815.1.11.1.3.1.1		not-accessible	Each port interface has a set of status parameters
T/F me1200PortInformationFdx	1.3.6.1.4.1.9.9.815.1.11.1.3.1.1.3	TruthValue	read-only	Shows whether interface is running in full duplex.
T/F me1200PortInformationFiber	1.3.6.1.4.1.9.9.815.1.11.1.3.1.1.4	TruthValue	read-only	Shows whether interface is a fiber link (fiber SFP or cu SFP).
NUM me1200PortInformationIfIndex	1.3.6.1.4.1.9.9.815.1.11.1.3.1.1.1	ME1200InterfaceIndex	not-accessible	Logical interface number.
T/F me1200PortInformationLink	1.3.6.1.4.1.9.9.815.1.11.1.3.1.1.2	TruthValue	read-only	Shows whether interface has link.
ME1 me1200PortInformationSFPType	1.3.6.1.4.1.9.9.815.1.11.1.3.1.1.6	ME1200PortSFPTransceiver	read-only	Shows the current interface SFP type.
STR me1200PortInformationSFPVendorName	1.3.6.1.4.1.9.9.815.1.11.1.3.1.1.7	ME1200DisplayString	read-only	Shows the SFP vendor name.
STR me1200PortInformationSFPVendorPN	1.3.6.1.4.1.9.9.815.1.11.1.3.1.1.8	ME1200DisplayString	read-only	Shows the SFP vendor Product Number.
STR me1200PortInformationSFPVendorRev	1.3.6.1.4.1.9.9.815.1.11.1.3.1.1.9	ME1200DisplayString	read-only	Shows the SFP vendor Revision.
ME1 me1200PortInformationSpeed	1.3.6.1.4.1.9.9.815.1.11.1.3.1.1.5	ME1200PortStatusSpeed	read-only	Shows the current interface speed.
me1200PortInformationTable	1.3.6.1.4.1.9.9.815.1.11.1.3.1		not-accessible	This table represents the status of the ports
me1200PortInformationTableInfoGroup	1.3.6.1.4.1.9.9.815.1.11.3.2.2			A collection of objects suitable for bulk operations.
me1200PortMib	1.3.6.1.4.1.9.9.815.1.11			This is a private version of the PORT MIB
me1200PortMibCompliance	1.3.6.1.4.1.9.9.815.1.11.3.1.1			The compliance statement for the implementation.
me1200PortMibCompliances	1.3.6.1.4.1.9.9.815.1.11.3.1
me1200PortMibConformance	1.3.6.1.4.1.9.9.815.1.11.3
me1200PortMibGroups	1.3.6.1.4.1.9.9.815.1.11.3.2
me1200PortNotification	1.3.6.1.4.1.9.9.815.1.11.1.5.0
NTF me1200PortNotificationEthAmdinSpeedIncompatible	1.3.6.1.4.1.9.9.815.1.11.1.5.0.1			Notification is sent when the Ethernet port administrative speed doesn't match the speed of the SFP transceiver installed.
me1200PortNotificationInfoGroup	1.3.6.1.4.1.9.9.815.1.11.3.2.11			A collection of objects suitable for bulk operations.
me1200PortNotificationPrefix	1.3.6.1.4.1.9.9.815.1.11.1.5
NTF me1200PortNotificationSFPSpeedInfoMissing	1.3.6.1.4.1.9.9.815.1.11.1.5.0.2			Notification is sent when the SFP transceiver type is unsupported.
me1200PortObjects	1.3.6.1.4.1.9.9.815.1.11.1
me1200PortQueuesStatisticsEntry	1.3.6.1.4.1.9.9.815.1.11.1.3.2.4.1		not-accessible	Each port interface has a set of statistics counters
NUM me1200PortQueuesStatisticsIfIndex	1.3.6.1.4.1.9.9.815.1.11.1.3.2.4.1.1	ME1200InterfaceIndex	not-accessible	Logical interface number.
I32 me1200PortQueuesStatisticsQueue	1.3.6.1.4.1.9.9.815.1.11.1.3.2.4.1.2	Integer32	not-accessible	Queue index.
C64 me1200PortQueuesStatisticsRxPrio	1.3.6.1.4.1.9.9.815.1.11.1.3.2.4.1.3	Counter64	read-only	The number of frames received for the queue.
me1200PortQueuesStatisticsTable	1.3.6.1.4.1.9.9.815.1.11.1.3.2.4		not-accessible	This table represents the port interfaces queues counters
me1200PortQueuesStatisticsTableInfoGroup	1.3.6.1.4.1.9.9.815.1.11.3.2.6			A collection of objects suitable for bulk operations.
C64 me1200PortQueuesStatisticsTxPrio	1.3.6.1.4.1.9.9.815.1.11.1.3.2.4.1.4	Counter64	read-only	The number of frames transmitted for the queue.
me1200PortRmonStatisticsEntry	1.3.6.1.4.1.9.9.815.1.11.1.3.2.1.1		not-accessible	Each port interface has a set of statistics counters
NUM me1200PortRmonStatisticsIfIndex	1.3.6.1.4.1.9.9.815.1.11.1.3.2.1.1.1	ME1200InterfaceIndex	not-accessible	Logical interface number.
C64 me1200PortRmonStatisticsRx1024to1518Pkts	1.3.6.1.4.1.9.9.815.1.11.1.3.2.1.1.17	Counter64	read-only	The number of received frames with size within 1024 to 1518 bytes.
C64 me1200PortRmonStatisticsRx128to255Pkts	1.3.6.1.4.1.9.9.815.1.11.1.3.2.1.1.14	Counter64	read-only	The number of received frames with size within 128 to 255 bytes.
C64 me1200PortRmonStatisticsRx1519PktsToMax	1.3.6.1.4.1.9.9.815.1.11.1.3.2.1.1.18	Counter64	read-only	The number of received frames with size larger than 1518 bytes.
C64 me1200PortRmonStatisticsRx256to511Pkts	1.3.6.1.4.1.9.9.815.1.11.1.3.2.1.1.15	Counter64	read-only	The number of received frames with size within 256 to 511 bytes.
C64 me1200PortRmonStatisticsRx512to1023Pkts	1.3.6.1.4.1.9.9.815.1.11.1.3.2.1.1.16	Counter64	read-only	The number of received frames with size within 512 to 1023 bytes.
C64 me1200PortRmonStatisticsRx64Pkts	1.3.6.1.4.1.9.9.815.1.11.1.3.2.1.1.12	Counter64	read-only	The number of 64 bytes frames received.
C64 me1200PortRmonStatisticsRx65to127Pkts	1.3.6.1.4.1.9.9.815.1.11.1.3.2.1.1.13	Counter64	read-only	The number of received frames with size within 65 to 127 bytes.
C64 me1200PortRmonStatisticsRxBroadcastPkts	1.3.6.1.4.1.9.9.815.1.11.1.3.2.1.1.5	Counter64	read-only	Shows the number of received (good and bad) broadcast packets.
C64 me1200PortRmonStatisticsRxCrcAlignErrPkts	1.3.6.1.4.1.9.9.815.1.11.1.3.2.1.1.7	Counter64	read-only	Shows the number of frames received with CRC or alignment errors.
C64 me1200PortRmonStatisticsRxDropEventsEx	1.3.6.1.4.1.9.9.815.1.11.1.3.2.1.1.2	Counter64	read-only	Shows the number of frames discarded due to ingress congestion.
C64 me1200PortRmonStatisticsRxFragmentsPkts	1.3.6.1.4.1.9.9.815.1.11.1.3.2.1.1.10	Counter64	read-only	Shows the number of short frames (frames that are smaller than 64 bytes) received with invalid CRC.
C64 me1200PortRmonStatisticsRxJabbersPkts	1.3.6.1.4.1.9.9.815.1.11.1.3.2.1.1.11	Counter64	read-only	The number of long frames (frames that are longer than the configured maximum frame length for this interface) received with invalid CRC.
C64 me1200PortRmonStatisticsRxMulticastPkts	1.3.6.1.4.1.9.9.815.1.11.1.3.2.1.1.6	Counter64	read-only	Shows the number of received (good and bad) multicast packets.
C64 me1200PortRmonStatisticsRxOctects	1.3.6.1.4.1.9.9.815.1.11.1.3.2.1.1.3	Counter64	read-only	Shows the number of received (good and bad) bytes. Includes FCS, but excludes framing bits.
C64 me1200PortRmonStatisticsRxOverizePkts	1.3.6.1.4.1.9.9.815.1.11.1.3.2.1.1.9	Counter64	read-only	Shows the number of long frames received with valid CRC.
C64 me1200PortRmonStatisticsRxPkts	1.3.6.1.4.1.9.9.815.1.11.1.3.2.1.1.4	Counter64	read-only	Shows the number of received (good and bad) packets.
C64 me1200PortRmonStatisticsRxUndersizePkts	1.3.6.1.4.1.9.9.815.1.11.1.3.2.1.1.8	Counter64	read-only	Shows the number of short frames (frames that are smaller than 64 bytes) received with valid CRC.
me1200PortRmonStatisticsTable	1.3.6.1.4.1.9.9.815.1.11.1.3.2.1		not-accessible	This table represents the port interface RMON statistics counters
me1200PortRmonStatisticsTableInfoGroup	1.3.6.1.4.1.9.9.815.1.11.3.2.3			A collection of objects suitable for bulk operations.
C64 me1200PortRmonStatisticsTx1024to1518Pkts	1.3.6.1.4.1.9.9.815.1.11.1.3.2.1.1.29	Counter64	read-only	The number of transmitted frames with size within 1024 to 1518 bytes.
C64 me1200PortRmonStatisticsTx128to255Pkts	1.3.6.1.4.1.9.9.815.1.11.1.3.2.1.1.26	Counter64	read-only	The number of transmitted frames with size within 128 to 255 bytes.
C64 me1200PortRmonStatisticsTx1519PktsToMax	1.3.6.1.4.1.9.9.815.1.11.1.3.2.1.1.30	Counter64	read-only	The number of transmitted frames with size larger than 1518 bytes.
C64 me1200PortRmonStatisticsTx256to511Pkts	1.3.6.1.4.1.9.9.815.1.11.1.3.2.1.1.27	Counter64	read-only	The number of transmitted frames with size within 256 to 511 bytes.
C64 me1200PortRmonStatisticsTx512to1023Pkts	1.3.6.1.4.1.9.9.815.1.11.1.3.2.1.1.28	Counter64	read-only	The number of transmitted frames with size within 512 to 1023 bytes.
C64 me1200PortRmonStatisticsTx64Pkts	1.3.6.1.4.1.9.9.815.1.11.1.3.2.1.1.24	Counter64	read-only	The number of 64 bytes frames transmitted.
C64 me1200PortRmonStatisticsTx65to127Pkts	1.3.6.1.4.1.9.9.815.1.11.1.3.2.1.1.25	Counter64	read-only	The number of transmitted frames with size within 65 to 127 bytes.
C64 me1200PortRmonStatisticsTxBroadcastPkts	1.3.6.1.4.1.9.9.815.1.11.1.3.2.1.1.22	Counter64	read-only	Shows the number of transmitted (good and bad) broadcast packets.
C64 me1200PortRmonStatisticsTxDropEvents	1.3.6.1.4.1.9.9.815.1.11.1.3.2.1.1.19	Counter64	read-only	Shows the number of frames discarded due to egress congestion.
C64 me1200PortRmonStatisticsTxMulticastPkts	1.3.6.1.4.1.9.9.815.1.11.1.3.2.1.1.23	Counter64	read-only	Shows the number of transmitted (good and bad) multicast packets.
C64 me1200PortRmonStatisticsTxOctects	1.3.6.1.4.1.9.9.815.1.11.1.3.2.1.1.20	Counter64	read-only	Shows the number of transmitted (good and bad) bytes. Includes FCS, but excludes framing bits.
C64 me1200PortRmonStatisticsTxPkts	1.3.6.1.4.1.9.9.815.1.11.1.3.2.1.1.21	Counter64	read-only	Shows the number of transmitted (good and bad) packets.
me1200PortStatistics	1.3.6.1.4.1.9.9.815.1.11.1.3.2
me1200PortStatisticsClear	1.3.6.1.4.1.9.9.815.1.11.1.4.1
me1200PortStatsClearEntry	1.3.6.1.4.1.9.9.815.1.11.1.4.1.1.1		not-accessible	Each port has a set of control parameters
NUM me1200PortStatsClearIfIndex	1.3.6.1.4.1.9.9.815.1.11.1.4.1.1.1.1	ME1200InterfaceIndex	not-accessible	Logical interface number.
T/F me1200PortStatsClearStatisticsClear	1.3.6.1.4.1.9.9.815.1.11.1.4.1.1.1.2	TruthValue	read-write	Set to TRUE to clear the statistics of an interface.
me1200PortStatsClearTable	1.3.6.1.4.1.9.9.815.1.11.1.4.1.1		not-accessible	This is a table to clear port Interface statistics
me1200PortStatsClearTableInfoGroup	1.3.6.1.4.1.9.9.815.1.11.3.2.9			A collection of objects suitable for bulk operations.
me1200PortStatus	1.3.6.1.4.1.9.9.815.1.11.1.3
me1200PortVeriPhyResult	1.3.6.1.4.1.9.9.815.1.11.1.3.3
me1200PortVeriPhyResultEntry	1.3.6.1.4.1.9.9.815.1.11.1.3.3.1.1		not-accessible	Each port has a set of VeriPhy results
NUM me1200PortVeriPhyResultIfIndex	1.3.6.1.4.1.9.9.815.1.11.1.3.3.1.1.1	ME1200InterfaceIndex	not-accessible	Logical interface number.
me1200PortVeriPhyResultTable	1.3.6.1.4.1.9.9.815.1.11.1.3.3.1		not-accessible	This table represents the VeriPhy result from the last VeriPhy run for the interface
me1200PortVeriPhyResultTableInfoGroup	1.3.6.1.4.1.9.9.815.1.11.3.2.8			A collection of objects suitable for bulk operations.
ME1 me1200PortVeriPhyResultVeriPhyLengthStatusPairA	1.3.6.1.4.1.9.9.815.1.11.1.3.3.1.1.6	ME1200Unsigned8	read-only	VeriPhy status cable length i meters for the cable pair. When VeriPhy is completed, the cable diagnostics results is shown in the VeriPhy status table. Note that VeriPHY is only accurate for cables of length 7 - 140 meters. The resolution is 3 meters
ME1 me1200PortVeriPhyResultVeriPhyLengthStatusPairB	1.3.6.1.4.1.9.9.815.1.11.1.3.3.1.1.7	ME1200Unsigned8	read-only	VeriPhy status cable length i meters for the cable pair. When VeriPhy is completed, the cable diagnostics results is shown in the VeriPhy status table. Note that VeriPHY is only accurate for cables of length 7 - 140 meters. The resolution is 3 meters
ME1 me1200PortVeriPhyResultVeriPhyLengthStatusPairC	1.3.6.1.4.1.9.9.815.1.11.1.3.3.1.1.8	ME1200Unsigned8	read-only	VeriPhy status cable length i meters for the cable pair. When VeriPhy is completed, the cable diagnostics results is shown in the VeriPhy status table. Note that VeriPHY is only accurate for cables of length 7 - 140 meters. The resolution is 3 meters
ME1 me1200PortVeriPhyResultVeriPhyLengthStatusPairD	1.3.6.1.4.1.9.9.815.1.11.1.3.3.1.1.9	ME1200Unsigned8	read-only	VeriPhy status cable length i meters for the cable pair. When VeriPhy is completed, the cable diagnostics results is shown in the VeriPhy status table. Note that VeriPHY is only accurate for cables of length 7 - 140 meters. The resolution is 3 meters
ME1 me1200PortVeriPhyResultVeriPhyStatusPairA	1.3.6.1.4.1.9.9.815.1.11.1.3.3.1.1.2	ME1200PortPhyVeriPhyStatus	read-only	VeriPhy status for the cable pair 0 - Cable is Correctly terminated pair 1 - Open pair 2 - Shorted pair 4 - Abnormal termination 8 - Cross-pair short to pair A 9 - Cross-pair short to pair B 10 - Cross-pair short to pair C 11 - Cross-pair short to pair D 12 - Abnormal cross-pair coupling - pair A 13 - Abnormal cross-pair coupling - pair B 14 - Abnormal cross-pair coupling - pair C 15 - Abnormal cross-pair coupling - pair D
ME1 me1200PortVeriPhyResultVeriPhyStatusPairB	1.3.6.1.4.1.9.9.815.1.11.1.3.3.1.1.3	ME1200PortPhyVeriPhyStatus	read-only	VeriPhy status for the cable pair 0 - Cable is Correctly terminated pair 1 - Open pair 2 - Shorted pair 4 - Abnormal termination 8 - Cross-pair short to pair A 9 - Cross-pair short to pair B 10 - Cross-pair short to pair C 11 - Cross-pair short to pair D 12 - Abnormal cross-pair coupling - pair A 13 - Abnormal cross-pair coupling - pair B 14 - Abnormal cross-pair coupling - pair C 15 - Abnormal cross-pair coupling - pair D
ME1 me1200PortVeriPhyResultVeriPhyStatusPairC	1.3.6.1.4.1.9.9.815.1.11.1.3.3.1.1.4	ME1200PortPhyVeriPhyStatus	read-only	VeriPhy status for the cable pair 0 - Cable is Correctly terminated pair 1 - Open pair 2 - Shorted pair 4 - Abnormal termination 8 - Cross-pair short to pair A 9 - Cross-pair short to pair B 10 - Cross-pair short to pair C 11 - Cross-pair short to pair D 12 - Abnormal cross-pair coupling - pair A 13 - Abnormal cross-pair coupling - pair B 14 - Abnormal cross-pair coupling - pair C 15 - Abnormal cross-pair coupling - pair D
ME1 me1200PortVeriPhyResultVeriPhyStatusPairD	1.3.6.1.4.1.9.9.815.1.11.1.3.3.1.1.5	ME1200PortPhyVeriPhyStatus	read-only	VeriPhy status for the cable pair 0 - Cable is Correctly terminated pair 1 - Open pair 2 - Shorted pair 4 - Abnormal termination 8 - Cross-pair short to pair A 9 - Cross-pair short to pair B 10 - Cross-pair short to pair C 11 - Cross-pair short to pair D 12 - Abnormal cross-pair coupling - pair A 13 - Abnormal cross-pair coupling - pair B 14 - Abnormal cross-pair coupling - pair C 15 - Abnormal cross-pair coupling - pair D
me1200PortVeriPhyStart	1.3.6.1.4.1.9.9.815.1.11.1.4.2
me1200PortVeriPhyStartEntry	1.3.6.1.4.1.9.9.815.1.11.1.4.2.1.1		not-accessible	Each port has a set of control parameters
NUM me1200PortVeriPhyStartIfIndex	1.3.6.1.4.1.9.9.815.1.11.1.4.2.1.1.1	ME1200InterfaceIndex	not-accessible	Logical interface number.
T/F me1200PortVeriPhyStartStart	1.3.6.1.4.1.9.9.815.1.11.1.4.2.1.1.2	TruthValue	read-write	Set to TRUE to start VeriPHy for the interface. When running 10 and 100 Mbps, ports will be linked down while running VeriPHY. Therefore, running VeriPHY on a 10 or 100 Mbps management port will cause the switch to stop responding until VeriPHY is complete.
me1200PortVeriPhyStartTable	1.3.6.1.4.1.9.9.815.1.11.1.4.2.1		not-accessible	This is a table to start VeriPhy for the interface
me1200PortVeriPhyStartTableInfoGroup	1.3.6.1.4.1.9.9.815.1.11.3.2.10			A collection of objects suitable for bulk operations.

RFC description

Cisco ME1200 switch private port MIB managing Ethernet interface configuration, duplex, flow control, and SFP status.

Start monitoring Cisco ME1200 Metro Ethernet switch (physical port config/status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ME1200-PORT-MIB