All MIBs › ME1200-PORT-MIB › me1200PortVeriPhyStartStart
me1200PortVeriPhyStartStart
Module: ME1200-PORT-MIB
OID (symbolic): ME1200-PORT-MIB::me1200PortVeriPhyStartStart
OID (numeric): 1.3.6.1.4.1.9.9.815.1.11.1.4.2.1.1.2
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Set to TRUE to start VeriPHy for the interface.
When running 10 and 100 Mbps, ports will be linked down while running VeriPHY. Therefore, running VeriPHY on a 10 or 100 Mbps management port will cause the switch to stop responding until VeriPHY is complete.
What is me1200PortVeriPhyStartStart?
Setting this to true starts a VeriPhy cable diagnostic run on the interface. The description warns that running VeriPhy at 10 or 100 Mbps causes the port to link down during the test, so admins should expect a brief outage on that port, and should avoid running it on a low-speed management port that they're currently connected through.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.11.1.4.2.1.1.2 snmpwalk -v2c -c public <target> ME1200-PORT-MIB::me1200PortVeriPhyStartStart
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.11.1.4.2.1.1.2.1 snmpget -v2c -c public <target> ME1200-PORT-MIB::me1200PortVeriPhyStartStart.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.815.1.11.1.4.2.1.1.2.1 s <value>
Start monitoring Cisco ME1200 Metro Ethernet switch (physical port config/status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-PORT-MIB::me1200PortVeriPhyStartStart OID value, configure state conditions and alerts, and monitor any Cisco ME1200 Metro Ethernet switch (physical port config/status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.815 | ciscoME1200MIB | CISCOME1200-MIB |
| 1.3.6.1.4.1.9.9.815.1 | me1200SwitchMgmt | CISCOME1200-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.815.1.11 | me1200PortMib | ME1200-PORT-MIB |
| 1.3.6.1.4.1.9.9.815.1.11.1 | me1200PortObjects | ME1200-PORT-MIB |
| 1.3.6.1.4.1.9.9.815.1.11.1.4 | me1200PortControl | ME1200-PORT-MIB |
| 1.3.6.1.4.1.9.9.815.1.11.1.4.2 | me1200PortVeriPhyStart | ME1200-PORT-MIB |
| 1.3.6.1.4.1.9.9.815.1.11.1.4.2.1 | me1200PortVeriPhyStartTable | ME1200-PORT-MIB |
| 1.3.6.1.4.1.9.9.815.1.11.1.4.2.1.1 | me1200PortVeriPhyStartEntry | ME1200-PORT-MIB |
| 1.3.6.1.4.1.9.9.815.1.11.1.4.2.1.1.2 | me1200PortVeriPhyStartStart | ME1200-PORT-MIB |