All MIBs › MELLANOX-MIB
Organization: Mellanox Technologies, Inc.
Last Updated: 2011-01-31
Category: Switch Management
Description: Provides top-level management and system status for Mellanox Technologies network devices.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is MELLANOX-MIB?
MELLANOX-MIB is a Mellanox Technologies (now part of NVIDIA) vendor MIB providing top-level system management and hardware/software identification objects for Mellanox networking devices such as InfiniBand and Ethernet switches. It exposes system-level inventory data (serial number, software version, build info, node name) as well as a process table for monitoring internal software processes running on the device. It is explicitly used to monitor both hardware identity (serial number) and software status, including process status and process failure counts, letting administrators detect crashed or repeatedly failing internal daemons. As a vendor MIB it typically sits under the enterprise mellanoxProducts/mellanoxMgmt subtree and works alongside other Mellanox-specific MIBs (e.g., power-cycle, environment) rather than replacing standard MIB-II. It is deployed on Mellanox switches and network interface cards in data center and HPC (InfiniBand) environments, and administrators can download the MELLANOX-MIB file to load into their MIB browser for polling.
IPNetwork Monitor allows you to monitor SNMP objects defined in MELLANOX-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Mellanox (NVIDIA) InfiniBand/Ethernet switches
- Mellanox network interface cards
Monitoring Examples
An operator queries swVersion and buildInfo to confirm which firmware release is running on a switch before a fleet-wide upgrade, and checks serialNumber and nodeName to positively identify the unit in inventory. Polling procTable/procEntry for procStatus and procNumFailures across each procName reveals whether an internal management process has crashed or restarted repeatedly, which would explain intermittent management-plane issues on the switch. A rising procNumFailures count for a specific procName over time would prompt the admin to investigate that particular software component rather than the switch hardware as a whole.
What Can Be Monitored
- software version/build info
- serial number/node name
- process status per process
- process failure counts
This MIB depends on
Related MIBs
Imported Objects
From SNMPv2-SMI
| Counter64 | |
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 | |
| enterprises |
From SNMPv2-TC
| TEXTUAL-CONVENTION |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| mellanox | 1.3.6.1.4.1.33049 | Mellanox vendor MIB | ||
| mellanoxProducts | 1.3.6.1.4.1.33049.1 | |||
| mellanoxMgmt | 1.3.6.1.4.1.33049.2 | |||
| generalMgmt | 1.3.6.1.4.1.33049.2.1 | |||
| gmVariables | 1.3.6.1.4.1.33049.2.1.1 | |||
| gmSystem | 1.3.6.1.4.1.33049.2.1.1.1 | |||
| OCT type | 1.3.6.1.4.1.33049.2.1.1.1.1 | OCTET STRING | read-only | System hardware type |
| OCT serialNumber | 1.3.6.1.4.1.33049.2.1.1.1.2 | OCTET STRING | read-only | System serial number |
| OCT swVersion | 1.3.6.1.4.1.33049.2.1.1.1.3 | OCTET STRING | read-only | System software version string |
| OCT buildInfo | 1.3.6.1.4.1.33049.2.1.1.1.4 | OCTET STRING | read-only | System software build information |
| OCT nodeName | 1.3.6.1.4.1.33049.2.1.1.1.5 | OCTET STRING | read-only | System node name |
| procmgr | 1.3.6.1.4.1.33049.2.1.1.2 | |||
| procTable | 1.3.6.1.4.1.33049.2.1.1.2.1 | not-accessible | List of processes managed or monitored by FabricIT | |
| procEntry | 1.3.6.1.4.1.33049.2.1.1.2.1.1 | not-accessible | Entry for one process | |
| U32 procIndex | 1.3.6.1.4.1.33049.2.1.1.2.1.1.1 | Unsigned32 | not-accessible | Synthetic numeric unique ID of process |
| OCT procName | 1.3.6.1.4.1.33049.2.1.1.2.1.1.2 | OCTET STRING | read-only | Unique name of process |
| OCT procStatus | 1.3.6.1.4.1.33049.2.1.1.2.1.1.3 | OCTET STRING | read-only | Current state of process |
| U32 procNumFailures | 1.3.6.1.4.1.33049.2.1.1.2.1.1.4 | Unsigned32 | read-only | Number of times process has crashed or exited unexpectedly |
| storage | 1.3.6.1.4.1.33049.2.1.1.3 | |||
| fsTable | 1.3.6.1.4.1.33049.2.1.1.3.1 | not-accessible | List of filesystems currently mounted | |
| fsEntry | 1.3.6.1.4.1.33049.2.1.1.3.1.1 | not-accessible | Entry for one mounted filesystem | |
| U32 fsIndex | 1.3.6.1.4.1.33049.2.1.1.3.1.1.1 | Unsigned32 | not-accessible | Synthetic numeric index for this filesystem |
| OCT fsMountPoint | 1.3.6.1.4.1.33049.2.1.1.3.1.1.2 | OCTET STRING | read-only | Mount point for this filesystem |
| C64 fsSpaceTotal | 1.3.6.1.4.1.33049.2.1.1.3.1.1.3 | Counter64 | read-only | Total number of bytes in this filesystem |
| C64 fsSpaceUsed | 1.3.6.1.4.1.33049.2.1.1.3.1.1.4 | Counter64 | read-only | Number of bytes used in this filesystem |
| C64 fsSpaceFree | 1.3.6.1.4.1.33049.2.1.1.3.1.1.5 | Counter64 | read-only | Number of bytes free in this filesystem |
| C64 fsSpaceAvail | 1.3.6.1.4.1.33049.2.1.1.3.1.1.6 | Counter64 | read-only | Number of bytes available in this filesystem |
| cpus | 1.3.6.1.4.1.33049.2.1.1.4 | |||
| cpuTable | 1.3.6.1.4.1.33049.2.1.1.4.1 | not-accessible | List of CPUs | |
| cpuEntry | 1.3.6.1.4.1.33049.2.1.1.4.1.1 | not-accessible | Entry for one CPU | |
| U32 cpuIndex | 1.3.6.1.4.1.33049.2.1.1.4.1.1.1 | Unsigned32 | not-accessible | Index of CPU, starting from 0 |
| TIK idleTime | 1.3.6.1.4.1.33049.2.1.1.4.1.1.2 | TimeTicks | read-only | Time in milliseconds CPU has spent idle |
| TIK systemTime | 1.3.6.1.4.1.33049.2.1.1.4.1.1.3 | TimeTicks | read-only | Time in milliseconds CPU has spent busy with system tasks |
| TIK userTime | 1.3.6.1.4.1.33049.2.1.1.4.1.1.4 | TimeTicks | read-only | Time in milliseconds CPU has spent busy with user tasks |
| gmNotifications | 1.3.6.1.4.1.33049.2.1.2 | |||
| NTF internalBusError | 1.3.6.1.4.1.33049.2.1.2.1 | I2C access failed more than 5 times | ||
| NTF procCrash | 1.3.6.1.4.1.33049.2.1.2.2 | A process managed by FabricIT has terminated unexpectedly and left a core file | ||
| NTF cpuUtilHigh | 1.3.6.1.4.1.33049.2.1.2.3 | The FabricIT management appliance CPU is very busy | ||
| NTF procUnexpectedExit | 1.3.6.1.4.1.33049.2.1.2.4 | A process managed by FabricIT has terminated unexpectedly and no core file was found | ||
| NTF unexpectedShutdown | 1.3.6.1.4.1.33049.2.1.2.5 | FabricIT management appliance shut down unexpectedly | ||
| NTF diskSpaceLow | 1.3.6.1.4.1.33049.2.1.2.6 | FabricIT management appliance is running out of disk space | ||
| NTF systemHealthStatus | 1.3.6.1.4.1.33049.2.1.2.7 | FabricIT management appliance health status | ||
| NTF lowPowerRecover | 1.3.6.1.4.1.33049.2.1.2.8 | FabricIT management appliance has restored to normal power | ||
| NTF insufficientFans | 1.3.6.1.4.1.33049.2.1.2.9 | FabricIT management appliance has insufficient number of working fans, please plug in additional fans | ||
| NTF insufficientFansRecover | 1.3.6.1.4.1.33049.2.1.2.10 | FabricIT management appliance has a sufficient number of working fans | ||
| ibSwitch | 1.3.6.1.4.1.33049.2.2 | |||
| ibVariables | 1.3.6.1.4.1.33049.2.2.1 | |||
| ibInventory | 1.3.6.1.4.1.33049.2.2.1.1 | |||
| invTable | 1.3.6.1.4.1.33049.2.2.1.1.1 | not-accessible | List of device inventory information | |
| invEntry | 1.3.6.1.4.1.33049.2.2.1.1.1.1 | not-accessible | Entry for one piece of inventory | |
| U32 invIndex | 1.3.6.1.4.1.33049.2.2.1.1.1.1.1 | Unsigned32 | not-accessible | Synthetic numeric unique ID of inventory element |
| OCT invName | 1.3.6.1.4.1.33049.2.2.1.1.1.1.2 | OCTET STRING | read-only | Unique name of one piece of inventory |
| OCT invType | 1.3.6.1.4.1.33049.2.2.1.1.1.1.3 | OCTET STRING | read-only | Type of inventory element |
| OCT invPartNum | 1.3.6.1.4.1.33049.2.2.1.1.1.1.4 | OCTET STRING | read-only | Part number of inventory element |
| OCT invSerialNum | 1.3.6.1.4.1.33049.2.2.1.1.1.1.5 | OCTET STRING | read-only | Serial number of inventory element |
| OCT invFirmware | 1.3.6.1.4.1.33049.2.2.1.1.1.1.6 | OCTET STRING | read-only | Firmware version running on inventory element |
| OCT invHealthStatus | 1.3.6.1.4.1.33049.2.2.1.1.1.1.7 | OCTET STRING | read-only | Module health status |
| ibPorts | 1.3.6.1.4.1.33049.2.2.1.2 | |||
| cntTable | 1.3.6.1.4.1.33049.2.2.1.2.1 | not-accessible | List of external port counters | |
| cntEntry | 1.3.6.1.4.1.33049.2.2.1.2.1.1 | not-accessible | Entry for one port | |
| U32 cntIndex | 1.3.6.1.4.1.33049.2.2.1.2.1.1.1 | Unsigned32 | read-only | Synthetic numeric unique ID of port |
| OCT cntName | 1.3.6.1.4.1.33049.2.2.1.2.1.1.2 | OCTET STRING | read-only | Module owning this port |
| U32 cntPort | 1.3.6.1.4.1.33049.2.2.1.2.1.1.3 | Unsigned32 | read-only | Port number on owning module |
| OCT cntPhyState | 1.3.6.1.4.1.33049.2.2.1.2.1.1.4 | OCTET STRING | read-only | Physical state of this port |
| OCT cntLogState | 1.3.6.1.4.1.33049.2.2.1.2.1.1.5 | OCTET STRING | read-only | Logical state of this port |
| OCT cntRate | 1.3.6.1.4.1.33049.2.2.1.2.1.1.6 | OCTET STRING | read-only | Port communication rate |
| OCT cntMTU | 1.3.6.1.4.1.33049.2.2.1.2.1.1.7 | OCTET STRING | read-only | Maximum block size on this port |
| C64 cntRcvData | 1.3.6.1.4.1.33049.2.2.1.2.1.1.8 | Counter64 | read-only | Number of bytes received on this port |
| C64 cntRcvPkts | 1.3.6.1.4.1.33049.2.2.1.2.1.1.9 | Counter64 | read-only | Number of frames received on this port |
| C64 cntXmitData | 1.3.6.1.4.1.33049.2.2.1.2.1.1.10 | Counter64 | read-only | Number of bytes sent on this port |
| C64 cntXmitPkts | 1.3.6.1.4.1.33049.2.2.1.2.1.1.11 | Counter64 | read-only | Number of frames sent on this port |
| C64 cntRcvErr | 1.3.6.1.4.1.33049.2.2.1.2.1.1.12 | Counter64 | read-only | Number of receive errors on this port |
| C64 cntXmitDiscard | 1.3.6.1.4.1.33049.2.2.1.2.1.1.13 | Counter64 | read-only | Number of send frames dropped on this port |
| C64 cntXmitWait | 1.3.6.1.4.1.33049.2.2.1.2.1.1.14 | Counter64 | read-only | Number of transmit waits on this port |
| C64 cntSymErr | 1.3.6.1.4.1.33049.2.2.1.2.1.1.15 | Counter64 | read-only | Number of symbol errors received on this port |
| C64 cntVL15Drop | 1.3.6.1.4.1.33049.2.2.1.2.1.1.16 | Counter64 | read-only | Number of VL15 frames dropped on this port |
| OCT cntSpeed | 1.3.6.1.4.1.33049.2.2.1.2.1.1.17 | OCTET STRING | read-only | Speed of each link on this port |
| OCT cntWidth | 1.3.6.1.4.1.33049.2.2.1.2.1.1.18 | OCTET STRING | read-only | Number of parallel links on this port |
| OCT cntOperationalVLs | 1.3.6.1.4.1.33049.2.2.1.2.1.1.19 | OCTET STRING | read-only | Virtaul lanes on this port |
| OCT cntSupportedSpeeds | 1.3.6.1.4.1.33049.2.2.1.2.1.1.20 | OCTET STRING | read-only | Supported speeds of each link on this port |
| OCT cntSupportedWidths | 1.3.6.1.4.1.33049.2.2.1.2.1.1.21 | OCTET STRING | read-only | Supported parallel links on this port |
| OCT cntMaxSupportedMTUs | 1.3.6.1.4.1.33049.2.2.1.2.1.1.22 | OCTET STRING | read-only | Maximum supported block size on this port |
| OCT cntVLCapabilities | 1.3.6.1.4.1.33049.2.2.1.2.1.1.23 | OCTET STRING | read-only | Virtual lanes capabilities on this port |
| OCT cntGUID | 1.3.6.1.4.1.33049.2.2.1.2.1.1.24 | OCTET STRING | read-only | Global Unique ID of this port |
| OCT cntLID | 1.3.6.1.4.1.33049.2.2.1.2.1.1.25 | OCTET STRING | read-only | Local ID of this port |
| ibNotifications | 1.3.6.1.4.1.33049.2.2.2 | |||
| NTF asicChipDown | 1.3.6.1.4.1.33049.2.2.2.1 | ASIC is down, fatal error | ||
| NTF asicOverTempReset | 1.3.6.1.4.1.33049.2.2.2.2 | reset happened due to over temperature of ASIC | ||
| NTF asicOverTemp | 1.3.6.1.4.1.33049.2.2.2.3 | Temperature too high | ||
| NTF lowPower | 1.3.6.1.4.1.33049.2.2.2.4 | FabricIT management appliance has insufficient power , please plug in more power cables | ||
| subnetMngr | 1.3.6.1.4.1.33049.2.3 | |||
| smVariables | 1.3.6.1.4.1.33049.2.3.1 | |||
| smNotifications | 1.3.6.1.4.1.33049.2.3.2 | |||
| NTF ibSMup | 1.3.6.1.4.1.33049.2.3.2.1 | Local Subnet Manager has started | ||
| NTF ibSMdown | 1.3.6.1.4.1.33049.2.3.2.2 | Local Subnet Manager has stopped | ||
| NTF ibSMrestart | 1.3.6.1.4.1.33049.2.3.2.3 | Local Subnet Manager been restarted | ||
| bxBridge | 1.3.6.1.4.1.33049.2.4 | |||
| bxVariables | 1.3.6.1.4.1.33049.2.4.1 | |||
| bxInventory | 1.3.6.1.4.1.33049.2.4.1.1 | |||
| bxInvTable | 1.3.6.1.4.1.33049.2.4.1.1.1 | not-accessible | List of device inventory information | |
| bxInvEntry | 1.3.6.1.4.1.33049.2.4.1.1.1.1 | not-accessible | Entry for one piece of inventory | |
| U32 bxInvIndex | 1.3.6.1.4.1.33049.2.4.1.1.1.1.1 | Unsigned32 | not-accessible | Synthetic numeric unique ID of inventory element |
| OCT bxInvName | 1.3.6.1.4.1.33049.2.4.1.1.1.1.2 | OCTET STRING | read-only | Unique name of one piece of inventory |
| OCT bxInvType | 1.3.6.1.4.1.33049.2.4.1.1.1.1.3 | OCTET STRING | read-only | Type of inventory element |
| OCT bxInvPartNum | 1.3.6.1.4.1.33049.2.4.1.1.1.1.4 | OCTET STRING | read-only | Part number of inventory element |
| OCT bxInvSerialNum | 1.3.6.1.4.1.33049.2.4.1.1.1.1.5 | OCTET STRING | read-only | Serial number of inventory element |
| OCT bxInvFirmware | 1.3.6.1.4.1.33049.2.4.1.1.1.1.6 | OCTET STRING | read-only | Firmware version running on inventory element |
| bxIbPorts | 1.3.6.1.4.1.33049.2.4.1.2 | |||
| bxIbCntTable | 1.3.6.1.4.1.33049.2.4.1.2.1 | not-accessible | List of InfiniBand port counters | |
| bxIbCntEntry | 1.3.6.1.4.1.33049.2.4.1.2.1.1 | not-accessible | Entry for one InfiniBand port | |
| U32 bxIbCntIndex | 1.3.6.1.4.1.33049.2.4.1.2.1.1.1 | Unsigned32 | not-accessible | Synthetic numeric unique ID of port |
| OCT bxIbCntName | 1.3.6.1.4.1.33049.2.4.1.2.1.1.2 | OCTET STRING | read-only | Name of this port |
| U32 bxIbCntPort | 1.3.6.1.4.1.33049.2.4.1.2.1.1.3 | Unsigned32 | read-only | Port number on owning module |
| OCT bxIbCntLogState | 1.3.6.1.4.1.33049.2.4.1.2.1.1.4 | OCTET STRING | read-only | Logical state of this port |
| OCT bxIbCntPhyState | 1.3.6.1.4.1.33049.2.4.1.2.1.1.5 | OCTET STRING | read-only | Physical state of this port |
| OCT bxIbCntRate | 1.3.6.1.4.1.33049.2.4.1.2.1.1.6 | OCTET STRING | read-only | Port communication rate |
| OCT bxIbCntSupportedSpeeds | 1.3.6.1.4.1.33049.2.4.1.2.1.1.7 | OCTET STRING | read-only | Supported speeds of each link on this port |
| OCT bxIbCntSpeed | 1.3.6.1.4.1.33049.2.4.1.2.1.1.8 | OCTET STRING | read-only | Speed of each link on this port |
| OCT bxIbCntSupportedWidths | 1.3.6.1.4.1.33049.2.4.1.2.1.1.9 | OCTET STRING | read-only | Supported parallel links on this port |
| OCT bxIbCntWidth | 1.3.6.1.4.1.33049.2.4.1.2.1.1.10 | OCTET STRING | read-only | Number of parallel links on this port |
| OCT bxIbCntMaxSupportedMTUs | 1.3.6.1.4.1.33049.2.4.1.2.1.1.11 | OCTET STRING | read-only | Maximum supported block size on this port |
| OCT bxIbCntMTU | 1.3.6.1.4.1.33049.2.4.1.2.1.1.12 | OCTET STRING | read-only | Maximum block size on this port |
| OCT bxIbCntVLCapabilities | 1.3.6.1.4.1.33049.2.4.1.2.1.1.13 | OCTET STRING | read-only | Virtual lanes capabilities on this port |
| OCT bxIbCntOperationalVLs | 1.3.6.1.4.1.33049.2.4.1.2.1.1.14 | OCTET STRING | read-only | Virtaul lanes on this port |
| OCT bxIbCntGUID | 1.3.6.1.4.1.33049.2.4.1.2.1.1.15 | OCTET STRING | read-only | Global Unique ID of this port |
| OCT bxIbCntLID | 1.3.6.1.4.1.33049.2.4.1.2.1.1.16 | OCTET STRING | read-only | Local ID of this port |
| C64 bxIbCntRcvPkts | 1.3.6.1.4.1.33049.2.4.1.2.1.1.17 | Counter64 | read-only | Number of frames received on this port |
| C64 bxIbCntRcvData | 1.3.6.1.4.1.33049.2.4.1.2.1.1.18 | Counter64 | read-only | Number of bytes received on this port |
| C64 bxIbCntRcvErr | 1.3.6.1.4.1.33049.2.4.1.2.1.1.19 | Counter64 | read-only | Number of receive errors on this port |
| C64 bxIbCntSymErr | 1.3.6.1.4.1.33049.2.4.1.2.1.1.20 | Counter64 | read-only | Number of symbol errors received on this port |
| C64 bxIbCntVL15Drop | 1.3.6.1.4.1.33049.2.4.1.2.1.1.21 | Counter64 | read-only | Number of VL15 frames dropped on this port |
| C64 bxIbCntXmitPkts | 1.3.6.1.4.1.33049.2.4.1.2.1.1.22 | Counter64 | read-only | Number of frames sent on this port |
| C64 bxIbCntXmitData | 1.3.6.1.4.1.33049.2.4.1.2.1.1.23 | Counter64 | read-only | Number of bytes sent on this port |
| C64 bxIbCntXmitWaits | 1.3.6.1.4.1.33049.2.4.1.2.1.1.24 | Counter64 | read-only | Number of transmit waits on this port |
| C64 bxIbCntXmitDiscards | 1.3.6.1.4.1.33049.2.4.1.2.1.1.25 | Counter64 | read-only | Number of send frames dropped on this port |
| bxEthPorts | 1.3.6.1.4.1.33049.2.4.1.3 | |||
| bxEthCntTable | 1.3.6.1.4.1.33049.2.4.1.3.1 | not-accessible | List of Ethernet port counters | |
| bxEthCntEntry | 1.3.6.1.4.1.33049.2.4.1.3.1.1 | not-accessible | Entry for one Ethernet port | |
| U32 bxEthCntIndex | 1.3.6.1.4.1.33049.2.4.1.3.1.1.1 | Unsigned32 | not-accessible | Synthetic numeric unique ID of port |
| OCT bxEthCntName | 1.3.6.1.4.1.33049.2.4.1.3.1.1.2 | OCTET STRING | read-only | Name of this port |
| OCT bxEthCntAdminMode | 1.3.6.1.4.1.33049.2.4.1.3.1.1.3 | OCTET STRING | read-only | Administrative mode of this port |
| OCT bxEthCntStatus | 1.3.6.1.4.1.33049.2.4.1.3.1.1.4 | OCTET STRING | read-only | Status of this port |
| OCT bxEthCntSupportedSpeeds | 1.3.6.1.4.1.33049.2.4.1.3.1.1.5 | OCTET STRING | read-only | Supported speeds of this port |
| OCT bxEthCntSpeed | 1.3.6.1.4.1.33049.2.4.1.3.1.1.6 | OCTET STRING | read-only | Speed of this port |
| OCT bxEthCntDuplex | 1.3.6.1.4.1.33049.2.4.1.3.1.1.7 | OCTET STRING | read-only | Duplex type of this port |
| OCT bxEthCntMTU | 1.3.6.1.4.1.33049.2.4.1.3.1.1.8 | OCTET STRING | read-only | Maximum block size on this port |
| OCT bxEthCntFlowcontrolStatus | 1.3.6.1.4.1.33049.2.4.1.3.1.1.9 | OCTET STRING | read-only | Flowcontrol status of this port |
| OCT bxEthCntFlowcontrolMode | 1.3.6.1.4.1.33049.2.4.1.3.1.1.10 | OCTET STRING | read-only | Flowcontrol mode of this port |
| OCT bxEthCntFlowcontrolPriorities | 1.3.6.1.4.1.33049.2.4.1.3.1.1.11 | OCTET STRING | read-only | Flowcontrol priorities list of this port |
| C64 bxEthCntRcvPkts | 1.3.6.1.4.1.33049.2.4.1.3.1.1.12 | Counter64 | read-only | Number of frames received on this port |
| C64 bxEthCntRcvUcastPkts | 1.3.6.1.4.1.33049.2.4.1.3.1.1.13 | Counter64 | read-only | Number of unicast frames received on this port |
| C64 bxEthCntRcvMcatsPkts | 1.3.6.1.4.1.33049.2.4.1.3.1.1.14 | Counter64 | read-only | Number of multicats frames received on this port |
| C64 bxEthCntRcvBcastPkts | 1.3.6.1.4.1.33049.2.4.1.3.1.1.15 | Counter64 | read-only | Number of broadcast frames received on this port |
| C64 bxEthCntRcvJumboPkts | 1.3.6.1.4.1.33049.2.4.1.3.1.1.16 | Counter64 | read-only | Number of jumbo frames received on this port |
| C64 bxEthCntRcvData | 1.3.6.1.4.1.33049.2.4.1.3.1.1.17 | Counter64 | read-only | Number of bytes received on this port |
| C64 bxEthCntRcvErr | 1.3.6.1.4.1.33049.2.4.1.3.1.1.18 | Counter64 | read-only | Number of erroneous frames received on this port |
| C64 bxEthCntRcvNoBuffer | 1.3.6.1.4.1.33049.2.4.1.3.1.1.19 | Counter64 | read-only | Number of no buffer erroneous frames received on this port |
| C64 bxEthCntRcvRunt | 1.3.6.1.4.1.33049.2.4.1.3.1.1.20 | Counter64 | read-only | Number of runt frames received on this port |
| C64 bxEthCntRcvCRC | 1.3.6.1.4.1.33049.2.4.1.3.1.1.21 | Counter64 | read-only | Number of crc erroneous frames received on this port |
| C64 bxEthCntXmitPkts | 1.3.6.1.4.1.33049.2.4.1.3.1.1.22 | Counter64 | read-only | Number of frames sent on this port |
| C64 bxEthCntXmitUcastPkts | 1.3.6.1.4.1.33049.2.4.1.3.1.1.23 | Counter64 | read-only | Number of unicast frames sent on this port |
| C64 bxEthCntXmitMcastPkts | 1.3.6.1.4.1.33049.2.4.1.3.1.1.24 | Counter64 | read-only | Number of multicats frames sent on this port |
| C64 bxEthCntXmitBcastPkts | 1.3.6.1.4.1.33049.2.4.1.3.1.1.25 | Counter64 | read-only | Number of broadcast frames sent on this port |
| C64 bxEthCntXmitJumboPkts | 1.3.6.1.4.1.33049.2.4.1.3.1.1.26 | Counter64 | read-only | Number of jumbo frames sent on this port |
| C64 bxEthCntXmitData | 1.3.6.1.4.1.33049.2.4.1.3.1.1.27 | Counter64 | read-only | Number of bytes sent on this port |
| C64 bxEthCntXmitErr | 1.3.6.1.4.1.33049.2.4.1.3.1.1.28 | Counter64 | read-only | Number of erroneous frames sent on this port |
| bxFcPorts | 1.3.6.1.4.1.33049.2.4.1.4 | |||
| bxFcCntTable | 1.3.6.1.4.1.33049.2.4.1.4.1 | not-accessible | List of Fibre Channel port counters | |
| bxFcCntEntry | 1.3.6.1.4.1.33049.2.4.1.4.1.1 | not-accessible | Entry for one Fibre Channel port | |
| U32 bxFcCntIndex | 1.3.6.1.4.1.33049.2.4.1.4.1.1.1 | Unsigned32 | not-accessible | Synthetic numeric unique ID of port |
| OCT bxFcCntName | 1.3.6.1.4.1.33049.2.4.1.4.1.1.2 | OCTET STRING | read-only | Name of this port |
| OCT bxFcCntAdminMode | 1.3.6.1.4.1.33049.2.4.1.4.1.1.3 | OCTET STRING | read-only | Administrative mode of this port |
| OCT bxFcCntStatus | 1.3.6.1.4.1.33049.2.4.1.4.1.1.4 | OCTET STRING | read-only | Status of this port |
| OCT bxFcCntSupportedSpeeds | 1.3.6.1.4.1.33049.2.4.1.4.1.1.5 | OCTET STRING | read-only | Supported speeds of this port |
| OCT bxFcCntSpeed | 1.3.6.1.4.1.33049.2.4.1.4.1.1.6 | OCTET STRING | read-only | Speed of this port |
| OCT bxFcCntWWPN | 1.3.6.1.4.1.33049.2.4.1.4.1.1.7 | OCTET STRING | read-only | WWN of this port |
| OCT bxFcCntFCID | 1.3.6.1.4.1.33049.2.4.1.4.1.1.8 | OCTET STRING | read-only | FC ID of this port |
| OCT bxFcCntRcvCreditsAlloc | 1.3.6.1.4.1.33049.2.4.1.4.1.1.9 | OCTET STRING | read-only | Receive Buffer-to-Buffer credits allocation on this port |
| OCT bxFcCntXmitCreditsAlloc | 1.3.6.1.4.1.33049.2.4.1.4.1.1.10 | OCTET STRING | read-only | Transmit Buffer-to-Buffer credits allocation on this port |
| C64 bxFcCntRcvPkts | 1.3.6.1.4.1.33049.2.4.1.4.1.1.11 | Counter64 | read-only | Number of frames received on this port |
| C64 bxFcCntRcvData | 1.3.6.1.4.1.33049.2.4.1.4.1.1.12 | Counter64 | read-only | Number of bytes received on this port |
| C64 bxFcCntRcvDiscards | 1.3.6.1.4.1.33049.2.4.1.4.1.1.13 | Counter64 | read-only | Number of discarded frames received on this port |
| C64 bxFcCntRcvErr | 1.3.6.1.4.1.33049.2.4.1.4.1.1.14 | Counter64 | read-only | Number of erroneous frames received on this port |
| C64 bxFcCntRcvCRC | 1.3.6.1.4.1.33049.2.4.1.4.1.1.15 | Counter64 | read-only | Number of crc erroneous frames received on this port |
| C64 bxFcCntRcvUnknown | 1.3.6.1.4.1.33049.2.4.1.4.1.1.16 | Counter64 | read-only | Number of unknown ordered set frames received on this port |
| C64 bxFcCntRcvLong | 1.3.6.1.4.1.33049.2.4.1.4.1.1.17 | Counter64 | read-only | Number of frames longer than the maximum frame size received on this port |
| C64 bxFcCntRcvShort | 1.3.6.1.4.1.33049.2.4.1.4.1.1.18 | Counter64 | read-only | Number of frames shorter than the minimum frame size received on this port |
| C64 bxFcCntRcvOffline | 1.3.6.1.4.1.33049.2.4.1.4.1.1.19 | Counter64 | read-only | Number of offline frames received on this port |
| C64 bxFcCntRcvLinkReset | 1.3.6.1.4.1.33049.2.4.1.4.1.1.20 | Counter64 | read-only | Number of link reset frames received on this port |
| C64 bxFcCntRcvNonOperational | 1.3.6.1.4.1.33049.2.4.1.4.1.1.21 | Counter64 | read-only | Number of non operational frames received on this port |
| C64 bxFcCntRcvRemainCredits | 1.3.6.1.4.1.33049.2.4.1.4.1.1.22 | Counter64 | read-only | Remaining receive Buffer-to-Buffer credits on this port |
| C64 bxFcCntXmitPkts | 1.3.6.1.4.1.33049.2.4.1.4.1.1.23 | Counter64 | read-only | Number of frames sent on this port |
| C64 bxFcCntXmitData | 1.3.6.1.4.1.33049.2.4.1.4.1.1.24 | Counter64 | read-only | Number of bytes sent on this port |
| C64 bxFcCntXmitDiscards | 1.3.6.1.4.1.33049.2.4.1.4.1.1.25 | Counter64 | read-only | Number of discarded frames sent on this port |
| C64 bxFcCntXmitErr | 1.3.6.1.4.1.33049.2.4.1.4.1.1.26 | Counter64 | read-only | Number of erroneous frames sent on this port |
| C64 bxFcCntXmitOffline | 1.3.6.1.4.1.33049.2.4.1.4.1.1.27 | Counter64 | read-only | Number of offline frames sent on this port |
| C64 bxFcCntXmitLinkReset | 1.3.6.1.4.1.33049.2.4.1.4.1.1.28 | Counter64 | read-only | Number of link reset frames sent on this port |
| C64 bxFcCntXmitNonOperational | 1.3.6.1.4.1.33049.2.4.1.4.1.1.29 | Counter64 | read-only | Number of non operational frames sent on this port |
| C64 bxFcCntXmitRemainCredits | 1.3.6.1.4.1.33049.2.4.1.4.1.1.30 | Counter64 | read-only | Remaining transmit Buffer-to-Buffer credits on this port |
| bxNotifications | 1.3.6.1.4.1.33049.2.4.2 | |||
| NTF bxAsicChipDown | 1.3.6.1.4.1.33049.2.4.2.1 | ASIC is down, fatal error | ||
| NTF bxAsicOverTempReset | 1.3.6.1.4.1.33049.2.4.2.2 | reset happened due to over temperature of ASIC | ||
| NTF bxAsicOverTemp | 1.3.6.1.4.1.33049.2.4.2.3 | Temperature too high | ||
| mlxIBObjects | 1.3.6.1.4.1.33049.2.5 | |||
| mlxIBCAInfoGroup | 1.3.6.1.4.1.33049.2.5.1 | |||
| U32 mlxIBCAInfoTableNumCAs | 1.3.6.1.4.1.33049.2.5.1.1 | Unsigned32 | read-only | Total number of channel adapters in the mlxIBCAInfoTable. |
| mlxIBCAInfoTable | 1.3.6.1.4.1.33049.2.5.1.2 | not-accessible | A table containing general information about the Channel Adapters in a system. Holes in this table are possible due to persistent numbering. | |
| mlxIBCAInfoEntry | 1.3.6.1.4.1.33049.2.5.1.2.1 | not-accessible | A conceptual row of the mlxIBCAInfoTable containing information about the general characteristics of each Channel Adapter. | |
| U32 mlxIBCAIndex | 1.3.6.1.4.1.33049.2.5.1.2.1.1 | Unsigned32 | not-accessible | Index that identifies a specific Channel Adapter in the system. |
| OCT mlxIBCADeviceName | 1.3.6.1.4.1.33049.2.5.1.2.1.2 | OCTET STRING | read-only | The device name of the Channel Adapter. |
| U32 mlxIBCAPCIDomain | 1.3.6.1.4.1.33049.2.5.1.2.1.3 | Unsigned32 | read-only | The PCI domain of the Channel Adapter. Same domain as indicated by lspci. |
| U32 mlxIBCAPCIBus | 1.3.6.1.4.1.33049.2.5.1.2.1.4 | Unsigned32 | read-only | The PCI bus of the Channel Adapter. Same bus as indicated by lspci. |
| U32 mlxIBCAPCISlot | 1.3.6.1.4.1.33049.2.5.1.2.1.5 | Unsigned32 | read-only | The PCI (logical) slot of the Channel Adapter. Same slot as indicated by lspci. |
| U32 mlxIBCAPCIFunction | 1.3.6.1.4.1.33049.2.5.1.2.1.6 | Unsigned32 | read-only | The PCI function of the Channel Adapter. Same function as indicated by lspci. |
| I32 mlxIBCAPCIPhysicalSlot | 1.3.6.1.4.1.33049.2.5.1.2.1.7 | Integer32 | read-only | The PCI (physical) slot of the Channel Adapter. The number zero (0) indicates an embedded interface (on the system board). A value of -1 indicates an interface whose slot is unknown. |
| U32 mlxIBCAIrq | 1.3.6.1.4.1.33049.2.5.1.2.1.8 | Unsigned32 | read-only | The interrupt request for the Channel Adapter. |
| OCT mlxIBCAModelString | 1.3.6.1.4.1.33049.2.5.1.2.1.9 | OCTET STRING | read-only | The model string of the Channel Adapter. |
| OCT mlxIBCASerialNumber | 1.3.6.1.4.1.33049.2.5.1.2.1.10 | OCTET STRING | read-only | The serial number of the Channel Adapter. |
| OCT mlxIBCAPartNumber | 1.3.6.1.4.1.33049.2.5.1.2.1.11 | OCTET STRING | read-only | The part number of the Channel Adapter. |
| IBG mlxIBCANodeGUID | 1.3.6.1.4.1.33049.2.5.1.2.1.12 | IbGuid | read-only | The NodeGUID of the Channel Adapter. All ports on the same node shall report the same node GUID value. This provides a means for uniquely identifying a CA node within a subnet and helps to determine the co-location of the ports on that CA. |
| IBG mlxIBCASystemImageGUID | 1.3.6.1.4.1.33049.2.5.1.2.1.13 | IbGuid | read-only | The SystemImageGUID of the Channel Adapter. This GUID associates this node with other nodes controlled by common supervisory code. Provides a means for system software to indicate the availability of multiple paths to the same destination via multiple nodes. Set to zero if indication of node association is not desired. The SystemImageGUID may be the NodeGUID of one of the associated nodes if that node is not field-replaceable. |
| OCT mlxIBCAFirmwareVersion | 1.3.6.1.4.1.33049.2.5.1.2.1.14 | OCTET STRING | read-only | The firmware version of the Channel Adapter. |
| OCT mlxIBCAHardwareVersion | 1.3.6.1.4.1.33049.2.5.1.2.1.15 | OCTET STRING | read-only | The hardware version of the Channel Adapter. |
| INT mlxIBCAHealthStatus | 1.3.6.1.4.1.33049.2.5.1.2.1.16 | INTEGER | read-only | The overall health status of the Channel Adapter. |
| U32 mlxIBCANumPorts | 1.3.6.1.4.1.33049.2.5.1.2.1.17 | Unsigned32 | read-only | Number of physical IB data ports on this Channel Adapter. Ports are numbered starting from 1. If there is more than one port, the ports are numbered sequentially. |
| INT mlxIBCAType | 1.3.6.1.4.1.33049.2.5.1.2.1.18 | INTEGER | read-only | Type of Channel Adapter; either a Host Channel Adapter (HCA), or a Target Channel Adapter (TCA). The key difference between an HCA and a TCA is that the HCA supports the IBA Verbs layer, while a TCA uses an implementation dependent interface to the transport layer. If the type of CA cannot be determined, the unknown(1) value is returned. |
| mlxIBSwitchInfoGroup | 1.3.6.1.4.1.33049.2.5.2 | |||
| U32 mlxIBSwitchInfoTableNumSwitches | 1.3.6.1.4.1.33049.2.5.2.1 | Unsigned32 | read-only | Total number of switches in the mlxIBSwitchInfoTable. |
| mlxIBSwitchInfoTable | 1.3.6.1.4.1.33049.2.5.2.2 | not-accessible | A table containing general information about the switches in a system. Holes in this table are possible due to persistent numbering. | |
| mlxIBSwitchInfoEntry | 1.3.6.1.4.1.33049.2.5.2.2.1 | not-accessible | A conceptual row of the mlxIBSwitchInfoTable containing information about the general characteristics of each switch. This is currently a placeholder until what's needed in IBSwitchInfo is defined. | |
| U32 mlxIBSwitchIndex | 1.3.6.1.4.1.33049.2.5.2.2.1.1 | Unsigned32 | not-accessible | Index that identifies a specific switch in the system. |
| mlxIBRouterInfoGroup | 1.3.6.1.4.1.33049.2.5.3 | |||
| U32 mlxIBRouterInfoTableNumRouters | 1.3.6.1.4.1.33049.2.5.3.1 | Unsigned32 | read-only | Total number of routers in the mlxIBRouterInfoTable. |
| mlxIBRouterInfoTable | 1.3.6.1.4.1.33049.2.5.3.2 | not-accessible | A table containing general information about the routers in a system. Holes in this table are possible due to persistent numbering. | |
| mlxIBRouterInfoEntry | 1.3.6.1.4.1.33049.2.5.3.2.1 | not-accessible | A conceptual row of the mlxIBRouterInfoTable containing information about the general characteristics of each router. This is currently a placeholder until what's needed in IBRouterInfo is defined. | |
| U32 mlxIBRouterIndex | 1.3.6.1.4.1.33049.2.5.3.2.1.1 | Unsigned32 | not-accessible | Index that identifies a specific router in the system. |
| mlxIBPortInfoGroup | 1.3.6.1.4.1.33049.2.5.4 | |||
| U32 mlxIBPortInfoTableNumPorts | 1.3.6.1.4.1.33049.2.5.4.1 | Unsigned32 | read-only | Total number of IB ports in the mlxIBPortInfoTable. |
| mlxIBPortInfoTable | 1.3.6.1.4.1.33049.2.5.4.2 | not-accessible | A table containing general information about the IB ports in the system. Holes in this table are possible due to persistent numbering. | |
| mlxIBPortInfoEntry | 1.3.6.1.4.1.33049.2.5.4.2.1 | not-accessible | A conceptual row of the mlxIBPortInfoTable containing information about the general characteristics of an IB port in the system. | |
| U32 mlxIBPortIndex | 1.3.6.1.4.1.33049.2.5.4.2.1.1 | Unsigned32 | not-accessible | Index that identifies the InfiniBand data port in the system. Note that if IB ports are included in MIB-2 ifTable, this can be the same as ifNumber so two different persistent numbering schemes are not needed with translation between the two. |
| U32 mlxIBPortLocalPortNumber | 1.3.6.1.4.1.33049.2.5.4.2.1.2 | Unsigned32 | read-only | Index that identifies the InfiniBand data port. IBA defines a range of valid data ports from 1 to N for CAs and router and 0 to N for switches, where N can have a maximum value of 254. |
| INT mlxIBPortState | 1.3.6.1.4.1.33049.2.5.4.2.1.3 | INTEGER | read-only | The state of the link of this port. Enumerated as: 1 : Down (includes failed links) 2 : Initialize 3 : Armed 4 : Active 5 : Other (0, 5-15: Reserved) |
| INT mlxIBPortPhysicalState | 1.3.6.1.4.1.33049.2.5.4.2.1.4 | INTEGER | read-only | Physical Port State. Enumerated as: 1 : Sleep 2 : Polling 3 : Disabled 4 : PortConfigurationTraining 5 : LinkUp 6 : LinkErrorRecovery 7 : PhyTest 8 : other (0, 8-15: Reserved) |
| IBG mlxIBPortGUID | 1.3.6.1.4.1.33049.2.5.4.2.1.5 | IbGuid | read-only | The GUID of this IB port. All ports on the same CA shall report a unique mlxIBPortGUID value. This provides a means for uniquely identifying a CA port within a subnet. One port within a node can return the NodeGUID as its PortGUID if the port is an integral part of the node and is not field-replaceable. |
| INT mlxIBPortNodeType | 1.3.6.1.4.1.33049.2.5.4.2.1.6 | INTEGER | read-only | The node type for this port. Enumerated as: 1 : Channel Adapter 2 : Switch 3 : Router 4 : Other (0, 4-15: Reserved) |
| U32 mlxIBPortNodeIndex | 1.3.6.1.4.1.33049.2.5.4.2.1.7 | Unsigned32 | read-only | Index of the IB node in the mlxIBTable which contains this port. |
| mlxIBNotifications | 1.3.6.1.4.1.33049.2.5.5 | |||
| NTF mlxIBCAHealthStatusChange | 1.3.6.1.4.1.33049.2.5.5.1 | The overall health status of the channel adapter has changed. SNMPv1 trap for this has mlxIBNotifications as the enterprise and 1 as the specific trap. | ||
| NTF mlxIBCAInsertion | 1.3.6.1.4.1.33049.2.5.5.2 | A channel adapter has been inserted in the system. Insertion of a CA means all its ports have also been inserted (separate port insertion events are not generated). SNMPv1 trap for this has mlxIBNotifications as the enterprise and 2 as the specific trap. | ||
| NTF mlxIBCARemoval | 1.3.6.1.4.1.33049.2.5.5.3 | A channel adapter has been removed from the system. Removal of a CA means all its ports have also been removed (separate port removal events are not generated). SNMPv1 trap for this has mlxIBNotifications as the enterprise and 3 as the specific trap. | ||
| NTF mlxIBSwitchInsertion | 1.3.6.1.4.1.33049.2.5.5.4 | A switch has been inserted in the system. Insertion of a switch means all its ports have also been inserted (separate port insertion events are not generated). SNMPv1 trap for this has mlxIBNotifications as the enterprise and 4 as the specific trap. | ||
| NTF mlxIBSwitchRemoval | 1.3.6.1.4.1.33049.2.5.5.5 | A switch has been removed from the system. Removal of a switch means all its ports have also been removed (separate port removal events are not generated). SNMPv1 trap for this has mlxIBNotifications as the enterprise and 5 as the specific trap. | ||
| NTF mlxIBRouterInsertion | 1.3.6.1.4.1.33049.2.5.5.6 | A router has been inserted in the system. Insertion of a router means all its ports have also been inserted (separate port insertion events are not generated). SNMPv1 trap for this has mlxIBNotifications as the enterprise and 6 as the specific trap. | ||
| NTF mlxIBRouterRemoval | 1.3.6.1.4.1.33049.2.5.5.7 | A router has been removed from the system. Removal of a router means all its ports have also been removed (separate port removal events are not generated). SNMPv1 trap for this has mlxIBNotifications as the enterprise and 7 as the specific trap. | ||
| NTF mlxIBPortStateChange | 1.3.6.1.4.1.33049.2.5.5.8 | The port state has changed. Refer to mlxIBPortState. SNMPv1 trap for this has mlxIBNotifications as the enterprise and 8 as the specific trap. | ||
| NTF mlxIBPortPhysicalStateChange | 1.3.6.1.4.1.33049.2.5.5.9 | The physical port state has changed. Refer to mlxIBPortPhysicalState. SNMPv1 trap for this has mlxIBNotifications as the enterprise and 9 as the specific trap. | ||
| NTF mlxIBPortInsertion | 1.3.6.1.4.1.33049.2.5.5.10 | An IBA port has been inserted in the system. SNMPv1 trap for this has mlxIBNotifications as the enterprise and 10 as the specific trap. | ||
| NTF mlxIBPortRemoval | 1.3.6.1.4.1.33049.2.5.5.11 | An IB port has been removed from the system. SNMPv1 trap for this has mlxIBNotifications as the enterprise and 11 as the specific trap. |
RFC description
Manages Mellanox InfiniBand and Ethernet switches, including IB port, GUID, and fabric health monitoring.
Start monitoring Mellanox (NVIDIA) InfiniBand/Ethernet switch or network adapter with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.