All MIBs › ME1200-PORT-MIB › me1200PortVeriPhyResultVeriPhyStatusPairB
me1200PortVeriPhyResultVeriPhyStatusPairB
Module: ME1200-PORT-MIB
OID (symbolic): ME1200-PORT-MIB::me1200PortVeriPhyResultVeriPhyStatusPairB
OID (numeric): 1.3.6.1.4.1.9.9.815.1.11.1.3.3.1.1.3
Node type: OBJECT-TYPE
Type: ME1200PortPhyVeriPhyStatus
Access: read-only
Description: VeriPhy status for the cable pair
0 - Cable is Correctly terminated pair
1 - Open pair
2 - Shorted pair
4 - Abnormal termination
8 - Cross-pair short to pair A
9 - Cross-pair short to pair B
10 - Cross-pair short to pair C
11 - Cross-pair short to pair D
12 - Abnormal cross-pair coupling - pair A
13 - Abnormal cross-pair coupling - pair B
14 - Abnormal cross-pair coupling - pair C
15 - Abnormal cross-pair coupling - pair D
What is me1200PortVeriPhyResultVeriPhyStatusPairB?
This reports the VeriPhy cable diagnostic result for wire pair B on this port, using the same status codes as pair A (correctly terminated, open, shorted, or cross-pair faults). Admins use it, alongside the other three pairs, to isolate which specific conductor in the cable has a fault.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.11.1.3.3.1.1.3 snmpwalk -v2c -c public <target> ME1200-PORT-MIB::me1200PortVeriPhyResultVeriPhyStatusPairB
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.11.1.3.3.1.1.3.1 snmpget -v2c -c public <target> ME1200-PORT-MIB::me1200PortVeriPhyResultVeriPhyStatusPairB.1
Start monitoring Cisco ME1200 Metro Ethernet switch (physical port config/status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-PORT-MIB::me1200PortVeriPhyResultVeriPhyStatusPairB OID value, configure state conditions and alerts, and monitor any Cisco ME1200 Metro Ethernet switch (physical port config/status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.815 | ciscoME1200MIB | CISCOME1200-MIB |
| 1.3.6.1.4.1.9.9.815.1 | me1200SwitchMgmt | CISCOME1200-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.815.1.11 | me1200PortMib | ME1200-PORT-MIB |
| 1.3.6.1.4.1.9.9.815.1.11.1 | me1200PortObjects | ME1200-PORT-MIB |
| 1.3.6.1.4.1.9.9.815.1.11.1.3 | me1200PortStatus | ME1200-PORT-MIB |
| 1.3.6.1.4.1.9.9.815.1.11.1.3.3 | me1200PortVeriPhyResult | ME1200-PORT-MIB |
| 1.3.6.1.4.1.9.9.815.1.11.1.3.3.1 | me1200PortVeriPhyResultTable | ME1200-PORT-MIB |
| 1.3.6.1.4.1.9.9.815.1.11.1.3.3.1.1 | me1200PortVeriPhyResultEntry | ME1200-PORT-MIB |
| 1.3.6.1.4.1.9.9.815.1.11.1.3.3.1.1.3 | me1200PortVeriPhyResultVeriPhyStatusPairB | ME1200-PORT-MIB |