All MIBs › MBG-SNMP-LT-MIB
Organization: www.meinberg.de
Last Updated: 2012-01-25
Category: Technology: Time Synchronization, Vendor: Meinberg
Description: Meinberg Radio Clocks SNMP MIB for LanTime series network time servers providing GPS/PPS synchronization status and configuration.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is MBG-SNMP-LT-MIB?
MBG-SNMP-LT-MIB is a Meinberg Radio Clocks proprietary module for the LanTime series of network time servers, exposing GPS/PPS-based time synchronization status and configuration objects. It provides firmware version information, current NTP synchronization state, stratum level, and details of the active reference clock including its ID, name, and offset. Its monitoring value directly covers both software status (firmware version, NTP daemon state) and core device function health: it lets administrators confirm the time server is synchronized, identify which reference clock (e.g., GPS) is currently active, and measure the offset/accuracy of that synchronization along with authentication key configuration. It builds on the standard NTP protocol model, exposing Meinberg-specific detail beyond what a generic NTP MIB would provide. It is typically deployed wherever precise, GPS-disciplined time synchronization is required, such as data centers, telecom facilities, or financial trading environments using Meinberg LanTime appliances. Engineers can download the MBG-SNMP-LT-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in MBG-SNMP-LT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Meinberg LanTime network time server
Monitoring Examples
An administrator would poll mbgLtNtpCurrentState and mbgLtNtpStratum together with mbgLtNtpActiveRefclockName and mbgLtNtpActiveRefclockOffset to confirm the LanTime server is synchronized to its GPS reference and within acceptable offset. A degraded mbgLtNtpCurrentStateVal or a growing mbgLtNtpActiveRefclockOffsetVal would reveal a loss of GPS signal or clock drift requiring investigation, while mbgLtFirmwareVersion confirms the installed software version.
What Can Be Monitored
- NTP synchronization state
- stratum level
- active reference clock and offset
- firmware version
- number of reference clocks
- NTP authentication key ID
This MIB depends on
Related MIBs
Imported Objects
From MBG-SNMP-ROOT-MIB
| mbgSnmpRoot | MODULE-IDENTITY |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE |
From SNMPv2-TC
| DisplayString |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| mbgLantime | 1.3.6.1.4.1.5597.3 | Meinberg SNMP Management Information Base | ||
| mbgLtInfo | 1.3.6.1.4.1.5597.3.0 | |||
| STR mbgLtFirmwareVersion | 1.3.6.1.4.1.5597.3.0.1 | DisplayString | read-only | shows the installed firmware version of your LANTIME |
| I32 mbgLtFirmwareVersionVal | 1.3.6.1.4.1.5597.3.0.2 | Integer32 | read-only | shows the installed firmware version of your LANTIME as an Integer32 value |
| mbgLtNtp | 1.3.6.1.4.1.5597.3.1 | |||
| STR mbgLtNtpCurrentState | 1.3.6.1.4.1.5597.3.1.1 | DisplayString | read-only | actual state of the NTP as string |
| INT mbgLtNtpCurrentStateVal | 1.3.6.1.4.1.5597.3.1.2 | INTEGER | read-only | current state of the NTP as Integer32 value |
| I32 mbgLtNtpStratum | 1.3.6.1.4.1.5597.3.1.3 | Integer32 | read-only | Stratum value of the NTP |
| INT mbgLtNtpActiveRefclockId | 1.3.6.1.4.1.5597.3.1.4 | INTEGER | read-only | Index of the current refclock selected by the NTP |
| STR mbgLtNtpActiveRefclockName | 1.3.6.1.4.1.5597.3.1.5 | DisplayString | read-only | Name of the current refclock selected by the NTP |
| STR mbgLtNtpActiveRefclockOffset | 1.3.6.1.4.1.5597.3.1.6 | DisplayString | read-only | Time offset between the current selected refclock and time of NTP as string |
| I32 mbgLtNtpActiveRefclockOffsetVal | 1.3.6.1.4.1.5597.3.1.7 | Integer32 | read-only | Time offset in micro seconds between the current selected refclock and time of NTP |
| I32 mbgLtNtpNumberOfRefclocks | 1.3.6.1.4.1.5597.3.1.8 | Integer32 | read-only | Number of refclocks configured in the NTP |
| I32 mbgLtNtpAuthKeyId | 1.3.6.1.4.1.5597.3.1.9 | Integer32 | read-only | Authentication Key ID of active refclock is active |
| STR mbgLtNtpVersion | 1.3.6.1.4.1.5597.3.1.10 | DisplayString | read-only | integrated NTP version |
| mbgLtRefclock | 1.3.6.1.4.1.5597.3.2 | |||
| STR mbgLtRefClockType | 1.3.6.1.4.1.5597.3.2.1 | DisplayString | read-only | Type of refclock connected to NTP time server |
| INT mbgLtRefClockTypeVal | 1.3.6.1.4.1.5597.3.2.2 | INTEGER | read-only | Type of refclock connected to NTP time server as value |
| STR mbgLtRefClockMode | 1.3.6.1.4.1.5597.3.2.3 | DisplayString | read-only | current mode of refclock connected to NTP time server |
| INT mbgLtRefClockModeVal | 1.3.6.1.4.1.5597.3.2.4 | INTEGER | read-only | current mode of refclock connected to NTP time server as value |
| STR mbgLtRefGpsState | 1.3.6.1.4.1.5597.3.2.5 | DisplayString | read-only | current State of GPS refclock conneted to NTP time server |
| INT mbgLtRefGpsStateVal | 1.3.6.1.4.1.5597.3.2.6 | INTEGER | read-only | current State of GPS refclock conneted to NTP time server as value |
| STR mbgLtRefGpsPosition | 1.3.6.1.4.1.5597.3.2.7 | DisplayString | read-only | current Position of GPS refclock conneted to NTP time server |
| STR mbgLtRefGpsSatellites | 1.3.6.1.4.1.5597.3.2.8 | DisplayString | read-only | current Satellites in view and good of GPS refclock connected to NTP time server |
| I32 mbgLtRefGpsSatellitesGood | 1.3.6.1.4.1.5597.3.2.9 | Integer32 | read-only | current good Satellites of GPS refclock connected to NTP time server as value |
| I32 mbgLtRefGpsSatellitesInView | 1.3.6.1.4.1.5597.3.2.10 | Integer32 | read-only | current Satellites in view of GPS refclock conneted to NTP time server as value |
| STR mbgLtRefPzfState | 1.3.6.1.4.1.5597.3.2.11 | DisplayString | read-only | current State of DCF77/PZF refclock connected to NTP time server |
| INT mbgLtRefPzfStateVal | 1.3.6.1.4.1.5597.3.2.12 | INTEGER | read-only | current State of DCF77/PZF refclock connected to NTP time server as value |
| I32 mbgLtRefPzfKorrelation | 1.3.6.1.4.1.5597.3.2.13 | Integer32 | read-only | current Korrelation of DCF77/PZF refclock connected to NTP time server |
| I32 mbgLtRefPzfField | 1.3.6.1.4.1.5597.3.2.14 | Integer32 | read-only | current strength of field of DCF77/PZF refclock connected to NTP time server |
| STR mbgLtRefGpsMode | 1.3.6.1.4.1.5597.3.2.15 | DisplayString | read-only | current Mode of GPS refclock connected to NTP time server |
| INT mbgLtRefGpsModeVal | 1.3.6.1.4.1.5597.3.2.16 | INTEGER | read-only | current Mode of GPS refclock connected to NTP time server as value |
| STR mbgLtRefIrigMode | 1.3.6.1.4.1.5597.3.2.17 | DisplayString | read-only | current Mode of IRIG refclock conneted to NTP time server |
| INT mbgLtRefIrigModeVal | 1.3.6.1.4.1.5597.3.2.18 | INTEGER | read-only | current Mode of IRIG refclock conneted to NTP time server as value |
| STR mbgLtRefPzfMode | 1.3.6.1.4.1.5597.3.2.19 | DisplayString | read-only | current Mode of PZF refclock connected to NTP time server |
| INT mbgLtRefPzfModeVal | 1.3.6.1.4.1.5597.3.2.20 | INTEGER | read-only | current Mode of PZF refclock connected to NTP time server as value |
| STR mbgLtRefIrigState | 1.3.6.1.4.1.5597.3.2.21 | DisplayString | read-only | current State of IRIG refclock connected to NTP time server |
| I32 mbgLtRefIrigStateVal | 1.3.6.1.4.1.5597.3.2.22 | Integer32 | read-only | current State of IRIG refclock connected to NTP time server as value |
| STR mbgLtRefSHSMode | 1.3.6.1.4.1.5597.3.2.23 | DisplayString | read-only | current Mode of SHS system connected to NTP time server |
| INT mbgLtRefSHSModeVal | 1.3.6.1.4.1.5597.3.2.24 | INTEGER | read-only | current Mode of SHS system connected to NTP time server as value |
| I32 mbgLtRefSHSTimeDiff | 1.3.6.1.4.1.5597.3.2.25 | Integer32 | read-only | current time difference between the two SHS reference time sources in miliseconds |
| STR mbgLtRefDctState | 1.3.6.1.4.1.5597.3.2.26 | DisplayString | read-only | current State of DCF77 refclock connected to NTP time server |
| INT mbgLtRefDctStateVal | 1.3.6.1.4.1.5597.3.2.27 | INTEGER | read-only | current State of DCF77 refclock connected to NTP time server as value |
| STR mbgLtRefDctField | 1.3.6.1.4.1.5597.3.2.28 | DisplayString | read-only | current strength of field of DCF77 refclock connected to NTP time server |
| STR mbgLtRefDctMode | 1.3.6.1.4.1.5597.3.2.29 | DisplayString | read-only | current Mode of DCF77 refclock connected to NTP time server |
| INT mbgLtRefDctModeVal | 1.3.6.1.4.1.5597.3.2.30 | INTEGER | read-only | current Mode of DCF77 refclock connected to NTP time server as value |
| STR mbgLtRefGpsLeapSecond | 1.3.6.1.4.1.5597.3.2.31 | DisplayString | read-only | Date and Time of leap second announcement received via GPS |
| I32 mbgLtRefGpsLeapCorrection | 1.3.6.1.4.1.5597.3.2.32 | Integer32 | read-only | Leap Second Correction received via GPS |
| mbgLtMrs | 1.3.6.1.4.1.5597.3.2.50 | |||
| STR mbgLtRefMrsRef | 1.3.6.1.4.1.5597.3.2.50.1 | DisplayString | read-only | ID of currently active reference source as a string |
| INT mbgLtRefMrsRefVal | 1.3.6.1.4.1.5597.3.2.50.2 | INTEGER | read-only | currently active reference as a value |
| STR mbgLtRefMrsRefList | 1.3.6.1.4.1.5597.3.2.50.3 | DisplayString | read-only | List of all supported MRS references in a comma separated list |
| STR mbgLtRefMrsPrioList | 1.3.6.1.4.1.5597.3.2.50.4 | DisplayString | read-only | List of all active MRS references in a comma separated list sorted by priority |
| mbgLtMrsRef | 1.3.6.1.4.1.5597.3.2.50.10 | |||
| mbgLtMrsRefGps | 1.3.6.1.4.1.5597.3.2.50.10.1 | |||
| STR mbgLtMrsGpsOffs | 1.3.6.1.4.1.5597.3.2.50.10.1.1 | DisplayString | read-only | Offset of this reference to the currently active reference, unit included in the string |
| I32 mbgLtMrsGpsOffsVal | 1.3.6.1.4.1.5597.3.2.50.10.1.2 | Integer32 | read-only | Offset of this reference to the currently active reference, unit see below |
| INT mbgLtMrsGpsOffsBase | 1.3.6.1.4.1.5597.3.2.50.10.1.3 | INTEGER | read-only | base of the offset value shown in mbgLtMrsGpsOffsVal |
| I32 mbgLtMrsGpsPrio | 1.3.6.1.4.1.5597.3.2.50.10.1.4 | Integer32 | read-only | the configured priority of this reference |
| STR mbgLtMrsGpsState | 1.3.6.1.4.1.5597.3.2.50.10.1.5 | DisplayString | read-only | the current status of this reference as a string |
| INT mbgLtMrsGpsStateVal | 1.3.6.1.4.1.5597.3.2.50.10.1.6 | INTEGER | read-only | the current status of this reference as an Integer value |
| I32 mbgLtMrsGpsPrecision | 1.3.6.1.4.1.5597.3.2.50.10.1.7 | Integer32 | read-write | Precision Factor of this reference in nanoseconds |
| mbgLtMrsRefIrig | 1.3.6.1.4.1.5597.3.2.50.10.2 | |||
| STR mbgLtMrsIrigOffs | 1.3.6.1.4.1.5597.3.2.50.10.2.1 | DisplayString | read-only | Offset of this reference to the currently active reference, unit included in the string |
| I32 mbgLtMrsIrigOffsVal | 1.3.6.1.4.1.5597.3.2.50.10.2.2 | Integer32 | read-only | Offset of this reference to the currently active reference, unit see below |
| INT mbgLtMrsIrigOffsBase | 1.3.6.1.4.1.5597.3.2.50.10.2.3 | INTEGER | read-only | base of the offset value shown in mbgLtMrsIrigOffsVal |
| I32 mbgLtMrsIrigPrio | 1.3.6.1.4.1.5597.3.2.50.10.2.4 | Integer32 | read-only | the configured priority of this reference |
| STR mbgLtMrsIrigState | 1.3.6.1.4.1.5597.3.2.50.10.2.5 | DisplayString | read-only | the current status of this reference as a string |
| INT mbgLtMrsIrigStateVal | 1.3.6.1.4.1.5597.3.2.50.10.2.6 | INTEGER | read-only | the current status of this reference as an Integer value |
| I32 mbgLtMrsIrigCorr | 1.3.6.1.4.1.5597.3.2.50.10.2.7 | Integer32 | read-write | Correction Value (Fixed Offset) of this reference in nanoseconds |
| I32 mbgLtMrsIrigOffsLimit | 1.3.6.1.4.1.5597.3.2.50.10.2.8 | Integer32 | read-write | Offset Limit in nanoseconds, if exceeded this will trigger a notification |
| I32 mbgLtMrsIrigPrecision | 1.3.6.1.4.1.5597.3.2.50.10.2.9 | Integer32 | read-write | Precision Factor of this reference in nanoseconds |
| mbgLtMrsRefPps | 1.3.6.1.4.1.5597.3.2.50.10.3 | |||
| STR mbgLtMrsPpsOffs | 1.3.6.1.4.1.5597.3.2.50.10.3.1 | DisplayString | read-only | Offset of this reference to the currently active reference, unit included in the string |
| I32 mbgLtMrsPpsOffsVal | 1.3.6.1.4.1.5597.3.2.50.10.3.2 | Integer32 | read-only | Offset of this reference to the currently active reference, unit see below |
| INT mbgLtMrsPpsOffsBase | 1.3.6.1.4.1.5597.3.2.50.10.3.3 | INTEGER | read-only | base of the offset value shown in mbgLtMrsPpsOffsVal |
| I32 mbgLtMrsPpsPrio | 1.3.6.1.4.1.5597.3.2.50.10.3.4 | Integer32 | read-only | the configured priority of this reference |
| STR mbgLtMrsPpsState | 1.3.6.1.4.1.5597.3.2.50.10.3.5 | DisplayString | read-only | the current status of this reference as a string |
| INT mbgLtMrsPpsStateVal | 1.3.6.1.4.1.5597.3.2.50.10.3.6 | INTEGER | read-only | the current status of this reference as an Integer value |
| I32 mbgLtMrsPpsCorr | 1.3.6.1.4.1.5597.3.2.50.10.3.7 | Integer32 | read-write | Correction Value (Fixed Offset) of this reference in nanoseconds |
| I32 mbgLtMrsPpsOffsLimit | 1.3.6.1.4.1.5597.3.2.50.10.3.8 | Integer32 | read-write | Offset Limit in nanoseconds, if exceeded this will trigger a notification |
| I32 mbgLtMrsPpsPrecision | 1.3.6.1.4.1.5597.3.2.50.10.3.9 | Integer32 | read-write | Precision Factor of this reference in nanoseconds |
| mbgLtMrsRefFreq | 1.3.6.1.4.1.5597.3.2.50.10.4 | |||
| STR mbgLtMrsFreqOffs | 1.3.6.1.4.1.5597.3.2.50.10.4.1 | DisplayString | read-only | Offset of this reference to the currently active reference, unit included in the string |
| I32 mbgLtMrsFreqOffsVal | 1.3.6.1.4.1.5597.3.2.50.10.4.2 | Integer32 | read-only | Offset of this reference to the currently active reference, unit see below |
| INT mbgLtMrsFreqOffsBase | 1.3.6.1.4.1.5597.3.2.50.10.4.3 | INTEGER | read-only | base of the offset value shown in mbgLtMrsFreqOffsVal |
| I32 mbgLtMrsFreqPrio | 1.3.6.1.4.1.5597.3.2.50.10.4.4 | Integer32 | read-only | the configured priority of this reference |
| STR mbgLtMrsFreqState | 1.3.6.1.4.1.5597.3.2.50.10.4.5 | DisplayString | read-only | the current status of this reference as a string |
| INT mbgLtMrsFreqStateVal | 1.3.6.1.4.1.5597.3.2.50.10.4.6 | INTEGER | read-only | the current status of this reference as an Integer value |
| I32 mbgLtMrsFreqCorr | 1.3.6.1.4.1.5597.3.2.50.10.4.7 | Integer32 | read-write | Correction Value (Fixed Offset) of this reference in nanoseconds |
| I32 mbgLtMrsFreqOffsLimit | 1.3.6.1.4.1.5597.3.2.50.10.4.8 | Integer32 | read-write | Offset Limit in nanoseconds, if exceeded this will trigger a notification |
| I32 mbgLtMrsFreqPrecision | 1.3.6.1.4.1.5597.3.2.50.10.4.9 | Integer32 | read-write | Precision Factor of this reference in nanoseconds |
| mbgLtMrsRefPtp | 1.3.6.1.4.1.5597.3.2.50.10.5 | |||
| STR mbgLtMrsPtpOffs | 1.3.6.1.4.1.5597.3.2.50.10.5.1 | DisplayString | read-only | Offset of this reference to the currently active reference, unit included in the string |
| I32 mbgLtMrsPtpOffsVal | 1.3.6.1.4.1.5597.3.2.50.10.5.2 | Integer32 | read-only | Offset of this reference to the currently active reference, unit see below |
| INT mbgLtMrsPtpOffsBase | 1.3.6.1.4.1.5597.3.2.50.10.5.3 | INTEGER | read-only | base of the offset value shown in mbgLtMrsPtpOffsVal |
| I32 mbgLtMrsPtpPrio | 1.3.6.1.4.1.5597.3.2.50.10.5.4 | Integer32 | read-only | the configured priority of this reference |
| STR mbgLtMrsPtpState | 1.3.6.1.4.1.5597.3.2.50.10.5.5 | DisplayString | read-only | the current status of this reference as a string |
| INT mbgLtMrsPtpStateVal | 1.3.6.1.4.1.5597.3.2.50.10.5.6 | INTEGER | read-only | the current status of this reference as an Integer value |
| I32 mbgLtMrsPtpCorr | 1.3.6.1.4.1.5597.3.2.50.10.5.7 | Integer32 | read-write | Correction Value (Fixed Offset) of this reference in nanoseconds |
| I32 mbgLtMrsPtpOffsLimit | 1.3.6.1.4.1.5597.3.2.50.10.5.8 | Integer32 | read-write | Offset Limit in nanoseconds, if exceeded this will trigger a notification |
| I32 mbgLtMrsPtpPrecision | 1.3.6.1.4.1.5597.3.2.50.10.5.9 | Integer32 | read-write | Precision Factor of this reference in nanoseconds |
| mbgLtMrsRefNtp | 1.3.6.1.4.1.5597.3.2.50.10.6 | |||
| STR mbgLtMrsNtpOffs | 1.3.6.1.4.1.5597.3.2.50.10.6.1 | DisplayString | read-only | Offset of this reference to the currently active reference, unit included in the string |
| I32 mbgLtMrsNtpOffsVal | 1.3.6.1.4.1.5597.3.2.50.10.6.2 | Integer32 | read-only | Offset of this reference to the currently active reference, unit see below |
| INT mbgLtMrsNtpOffsBase | 1.3.6.1.4.1.5597.3.2.50.10.6.3 | INTEGER | read-only | base of the offset value shown in mbgLtMrsNtpOffsVal |
| I32 mbgLtMrsNtpPrio | 1.3.6.1.4.1.5597.3.2.50.10.6.4 | Integer32 | read-only | the configured priority of this reference |
| STR mbgLtMrsNtpState | 1.3.6.1.4.1.5597.3.2.50.10.6.5 | DisplayString | read-only | the current status of this reference as a string |
| INT mbgLtMrsNtpStateVal | 1.3.6.1.4.1.5597.3.2.50.10.6.6 | INTEGER | read-only | the current status of this reference as an Integer value |
| I32 mbgLtMrsNtpCorr | 1.3.6.1.4.1.5597.3.2.50.10.6.7 | Integer32 | read-write | Correction Value (Fixed Offset) of this reference in nanoseconds |
| I32 mbgLtMrsNtpOffsLimit | 1.3.6.1.4.1.5597.3.2.50.10.6.8 | Integer32 | read-write | Offset Limit in nanoseconds, if exceeded this will trigger a notification |
| I32 mbgLtMrsNtpPrecision | 1.3.6.1.4.1.5597.3.2.50.10.6.9 | Integer32 | read-write | Precision Factor of this reference in nanoseconds |
| mbgLtNotifications | 1.3.6.1.4.1.5597.3.3 | |||
| mbgLtTraps | 1.3.6.1.4.1.5597.3.3.0 | |||
| NTF mbgLtTrapNTPNotSync | 1.3.6.1.4.1.5597.3.3.0.1 | trap to be sent when NTP is not synchronised | ||
| NTF mbgLtTrapNTPStopped | 1.3.6.1.4.1.5597.3.3.0.2 | trap to be sent when NTP is stopped | ||
| NTF mbgLtTrapServerBoot | 1.3.6.1.4.1.5597.3.3.0.3 | trap to be sent when time server has finished boot sequence | ||
| NTF mbgLtTrapReceiverNotResponding | 1.3.6.1.4.1.5597.3.3.0.4 | trap to be sent when receiver is not responding | ||
| NTF mbgLtTrapReceiverNotSync | 1.3.6.1.4.1.5597.3.3.0.5 | trap to be sent when receiver is not synchronised | ||
| NTF mbgLtTrapAntennaFaulty | 1.3.6.1.4.1.5597.3.3.0.6 | trap to be sent when connection to antenna is broken | ||
| NTF mbgLtTrapAntennaReconnect | 1.3.6.1.4.1.5597.3.3.0.7 | trap to be sent when antenna has been reconnected | ||
| NTF mbgLtTrapConfigChanged | 1.3.6.1.4.1.5597.3.3.0.8 | trap to be sent when timeserver reloaded its configuration | ||
| NTF mbgLtTrapLeapSecondAnnounced | 1.3.6.1.4.1.5597.3.3.0.9 | trap to be sent when a leap second has been announced | ||
| NTF mbgLtTrapSHSTimeLimitError | 1.3.6.1.4.1.5597.3.3.0.10 | trap to be sent when SHS timelimit exceeded | ||
| NTF mbgLtTrapSecondaryRecNotSync | 1.3.6.1.4.1.5597.3.3.0.11 | trap to be sent when secondary receiver in SHS system is not synchronised | ||
| NTF mbgLtTrapPowerSupplyFailure | 1.3.6.1.4.1.5597.3.3.0.12 | trap to be sent when one of the redundant power supplies fails | ||
| NTF mbgLtTrapAntennaShortCircuit | 1.3.6.1.4.1.5597.3.3.0.13 | trap to be sent when a connected antenna fails due to a short circuit | ||
| NTF mbgLtTrapReceiverSync | 1.3.6.1.4.1.5597.3.3.0.14 | trap to be sent when receiver is synchronised | ||
| NTF mbgLtTrapNTPClientAlarm | 1.3.6.1.4.1.5597.3.3.0.15 | trap to be sent when an NTP Client Monitoring alarm occurs, e.g. when a monitored client is not reachable. | ||
| NTF mbgLtTrapPowerSupplyUp | 1.3.6.1.4.1.5597.3.3.0.16 | trap to be sent when a power supply returned to a healthy state. | ||
| NTF mbgLtTrapNetworkDown | 1.3.6.1.4.1.5597.3.3.0.17 | trap to be sent when a monitored network port is down. | ||
| NTF mbgLtTrapNetworkUp | 1.3.6.1.4.1.5597.3.3.0.18 | trap to be sent when a monitored network port is up. | ||
| NTF mbgLtTrapSecondaryRecNotResp | 1.3.6.1.4.1.5597.3.3.0.19 | trap to be sent when secondary receiver is not responding | ||
| NTF mbgLtTrapXmrLimitExceeded | 1.3.6.1.4.1.5597.3.3.0.30 | trap to be sent when a reference offset exceeds the configured limit | ||
| NTF mbgLtTrapXmrRefDisconnect | 1.3.6.1.4.1.5597.3.3.0.31 | trap to be sent when a reference signal has been lost | ||
| NTF mbgLtTrapXmrRefReconnect | 1.3.6.1.4.1.5597.3.3.0.32 | trap to be sent when a reference signal recovered | ||
| NTF mbgLtTrapFdmError | 1.3.6.1.4.1.5597.3.3.0.33 | trap to be sent when the Fdm module generates an alarm | ||
| NTF mbgLtTrapSHSTimeLimitWarning | 1.3.6.1.4.1.5597.3.3.0.34 | trap to be sent when SHS warning limit exceeded | ||
| NTF mbgLtTrapSecondaryRecSync | 1.3.6.1.4.1.5597.3.3.0.35 | trap to be sent when secondary receiver is synchronised | ||
| NTF mbgLtTrapNTPSync | 1.3.6.1.4.1.5597.3.3.0.36 | trap to be sent when NTP is synchronised | ||
| NTF mbgLtTrapPtpPortDisconnected | 1.3.6.1.4.1.5597.3.3.0.37 | trap to be sent when PTP network port got disconnected | ||
| NTF mbgLtTrapPtpPortConnected | 1.3.6.1.4.1.5597.3.3.0.38 | trap to be sent when PTP network port got connected | ||
| NTF mbgLtTrapPtpStateChanged | 1.3.6.1.4.1.5597.3.3.0.39 | trap to be sent when PTP state changed (e.g. from 'passive' to 'master') | ||
| NTF mbgLtTrapPtpError | 1.3.6.1.4.1.5597.3.3.0.40 | trap to be sent when PTP raised an error | ||
| NTF mbgLtTrapNormalOperation | 1.3.6.1.4.1.5597.3.3.0.77 | trap to be sent when the system returned to a healthy state | ||
| NTF mbgLtTrapHeartbeat | 1.3.6.1.4.1.5597.3.3.0.88 | trap to be sent periodically to indicate that time server is still alive | ||
| NTF mbgLtTrapTestNotification | 1.3.6.1.4.1.5597.3.3.0.99 | trap to be sent when a test notification has been requested | ||
| STR mbgLtTrapMessage | 1.3.6.1.4.1.5597.3.3.0.100 | DisplayString | read-only | used as a payload object for all traps, holds a clear text event message |
| mbgLtCfg | 1.3.6.1.4.1.5597.3.4 | |||
| mbgLtCfgNetwork | 1.3.6.1.4.1.5597.3.4.1 | |||
| STR mbgLtCfgHostname | 1.3.6.1.4.1.5597.3.4.1.1 | DisplayString | read-write | The hostname configured for this LANTIME |
| STR mbgLtCfgDomainname | 1.3.6.1.4.1.5597.3.4.1.2 | DisplayString | read-write | The domainname configured for this LANTIME |
| STR mbgLtCfgNameserver1 | 1.3.6.1.4.1.5597.3.4.1.3 | DisplayString | read-write | The first nameserver used by this LANTIME |
| STR mbgLtCfgNameserver2 | 1.3.6.1.4.1.5597.3.4.1.4 | DisplayString | read-write | The second nameserver used this LANTIME |
| STR mbgLtCfgSyslogserver1 | 1.3.6.1.4.1.5597.3.4.1.5 | DisplayString | read-write | The first syslog server we are sending log entries to |
| STR mbgLtCfgSyslogserver2 | 1.3.6.1.4.1.5597.3.4.1.6 | DisplayString | read-write | The second syslog server we are sending log entries to |
| INT mbgLtCfgTelnetAccess | 1.3.6.1.4.1.5597.3.4.1.7 | INTEGER | read-write | Is telnet administration enabled |
| INT mbgLtCfgFTPAccess | 1.3.6.1.4.1.5597.3.4.1.8 | INTEGER | read-write | Is FTP administration enabled |
| INT mbgLtCfgHTTPAccess | 1.3.6.1.4.1.5597.3.4.1.9 | INTEGER | read-write | Is web based administration enabled |
| INT mbgLtCfgHTTPSAccess | 1.3.6.1.4.1.5597.3.4.1.10 | INTEGER | read-write | Is secure web based administration enabled |
| INT mbgLtCfgSNMPAccess | 1.3.6.1.4.1.5597.3.4.1.11 | INTEGER | read-write | Is SNMP administration enabled |
| INT mbgLtCfgSambaAccess | 1.3.6.1.4.1.5597.3.4.1.12 | INTEGER | read-write | Is Samba administration enabled |
| INT mbgLtCfgIPv6Access | 1.3.6.1.4.1.5597.3.4.1.13 | INTEGER | read-write | Is IPv6 support enabled |
| INT mbgLtCfgSSHAccess | 1.3.6.1.4.1.5597.3.4.1.14 | INTEGER | read-write | Is SSH administration enabled |
| mbgLtCfgNTP | 1.3.6.1.4.1.5597.3.4.2 | |||
| mbgLtCfgNTPServer1 | 1.3.6.1.4.1.5597.3.4.2.1 | |||
| STR mbgLtCfgNTPServer1IP | 1.3.6.1.4.1.5597.3.4.2.1.1 | DisplayString | read-write | IP address for external NTP server |
| I32 mbgLtCfgNTPServer1Key | 1.3.6.1.4.1.5597.3.4.2.1.2 | Integer32 | read-write | Key for external NTP server |
| INT mbgLtCfgNTPServer1Autokey | 1.3.6.1.4.1.5597.3.4.2.1.3 | INTEGER | read-write | Is autokey enabled for the external NTP server |
| INT mbgLtCfgNTPServer1Prefer | 1.3.6.1.4.1.5597.3.4.2.1.4 | INTEGER | read-write | Is the preferred flag enabled for the external NTP server |
| mbgLtCfgNTPServer2 | 1.3.6.1.4.1.5597.3.4.2.2 | |||
| STR mbgLtCfgNTPServer2IP | 1.3.6.1.4.1.5597.3.4.2.2.1 | DisplayString | read-write | IP address for external NTP server |
| I32 mbgLtCfgNTPServer2Key | 1.3.6.1.4.1.5597.3.4.2.2.2 | Integer32 | read-write | Key for external NTP server |
| INT mbgLtCfgNTPServer2Autokey | 1.3.6.1.4.1.5597.3.4.2.2.3 | INTEGER | read-write | Is autokey enabled for the external NTP server |
| INT mbgLtCfgNTPServer2Prefer | 1.3.6.1.4.1.5597.3.4.2.2.4 | INTEGER | read-write | Is the preferred flag enabled for the external NTP server |
| mbgLtCfgNTPServer3 | 1.3.6.1.4.1.5597.3.4.2.3 | |||
| STR mbgLtCfgNTPServer3IP | 1.3.6.1.4.1.5597.3.4.2.3.1 | DisplayString | read-write | IP address for external NTP server |
| I32 mbgLtCfgNTPServer3Key | 1.3.6.1.4.1.5597.3.4.2.3.2 | Integer32 | read-write | Key for external NTP server |
| INT mbgLtCfgNTPServer3Autokey | 1.3.6.1.4.1.5597.3.4.2.3.3 | INTEGER | read-write | Is autokey enabled for the external NTP server |
| INT mbgLtCfgNTPServer3Prefer | 1.3.6.1.4.1.5597.3.4.2.3.4 | INTEGER | read-write | Is the preferred flag enabled for the external NTP server |
| mbgLtCfgNTPServer4 | 1.3.6.1.4.1.5597.3.4.2.4 | |||
| STR mbgLtCfgNTPServer4IP | 1.3.6.1.4.1.5597.3.4.2.4.1 | DisplayString | read-write | IP address for external NTP server |
| I32 mbgLtCfgNTPServer4Key | 1.3.6.1.4.1.5597.3.4.2.4.2 | Integer32 | read-write | Key for external NTP server |
| INT mbgLtCfgNTPServer4Autokey | 1.3.6.1.4.1.5597.3.4.2.4.3 | INTEGER | read-write | Is autokey enabled for the external NTP server |
| INT mbgLtCfgNTPServer4Prefer | 1.3.6.1.4.1.5597.3.4.2.4.4 | INTEGER | read-write | Is the preferred flag enabled for the external NTP server |
| mbgLtCfgNTPServer5 | 1.3.6.1.4.1.5597.3.4.2.5 | |||
| STR mbgLtCfgNTPServer5IP | 1.3.6.1.4.1.5597.3.4.2.5.1 | DisplayString | read-write | IP address for external NTP server |
| I32 mbgLtCfgNTPServer5Key | 1.3.6.1.4.1.5597.3.4.2.5.2 | Integer32 | read-write | Key for external NTP server |
| INT mbgLtCfgNTPServer5Autokey | 1.3.6.1.4.1.5597.3.4.2.5.3 | INTEGER | read-write | Is autokey enabled for the external NTP server |
| INT mbgLtCfgNTPServer5Prefer | 1.3.6.1.4.1.5597.3.4.2.5.4 | INTEGER | read-write | Is the preferred flag enabled for the external NTP server |
| mbgLtCfgNTPServer6 | 1.3.6.1.4.1.5597.3.4.2.6 | |||
| STR mbgLtCfgNTPServer6IP | 1.3.6.1.4.1.5597.3.4.2.6.1 | DisplayString | read-write | IP address for external NTP server |
| I32 mbgLtCfgNTPServer6Key | 1.3.6.1.4.1.5597.3.4.2.6.2 | Integer32 | read-write | Key for external NTP server |
| INT mbgLtCfgNTPServer6Autokey | 1.3.6.1.4.1.5597.3.4.2.6.3 | INTEGER | read-write | Is autokey enabled for the external NTP server |
| INT mbgLtCfgNTPServer6Prefer | 1.3.6.1.4.1.5597.3.4.2.6.4 | INTEGER | read-write | Is the preferred flag enabled for the external NTP server |
| mbgLtCfgNTPServer7 | 1.3.6.1.4.1.5597.3.4.2.7 | |||
| STR mbgLtCfgNTPServer7IP | 1.3.6.1.4.1.5597.3.4.2.7.1 | DisplayString | read-write | IP address for external NTP server |
| I32 mbgLtCfgNTPServer7Key | 1.3.6.1.4.1.5597.3.4.2.7.2 | Integer32 | read-write | Key for external NTP server |
| INT mbgLtCfgNTPServer7Autokey | 1.3.6.1.4.1.5597.3.4.2.7.3 | INTEGER | read-write | Is autokey enabled for the external NTP server |
| INT mbgLtCfgNTPServer7Prefer | 1.3.6.1.4.1.5597.3.4.2.7.4 | INTEGER | read-write | Is the preferred flag enabled for the external NTP server |
| I32 mbgLtCfgNTPStratumLocalClock | 1.3.6.1.4.1.5597.3.4.2.8 | Integer32 | read-write | The stratum value assigned to the local clock of the timeserver |
| I32 mbgLtCfgNTPTrustedKey | 1.3.6.1.4.1.5597.3.4.2.9 | Integer32 | read-write | The key used for the internal refclock of the timeserver |
| STR mbgLtCfgNTPBroadcastIP | 1.3.6.1.4.1.5597.3.4.2.10 | DisplayString | read-write | NTP broadcast IP address |
| I32 mbgLtCfgNTPBroadcastKey | 1.3.6.1.4.1.5597.3.4.2.11 | Integer32 | read-write | Key used for NTP broadcasts |
| INT mbgLtCfgNTPBroadcastAutokey | 1.3.6.1.4.1.5597.3.4.2.12 | INTEGER | read-write | Is autokey generation used for NTP broadcasts |
| INT mbgLtCfgNTPAutokeyFeature | 1.3.6.1.4.1.5597.3.4.2.13 | INTEGER | read-write | Is the NTP autokey feature enabled |
| INT mbgLtCfgNTPAtomPPS | 1.3.6.1.4.1.5597.3.4.2.14 | INTEGER | read-write | Is the NTP atom pps feature enabled |
| mbgLtCfgEMail | 1.3.6.1.4.1.5597.3.4.3 | |||
| STR mbgLtCfgEMailTo | 1.3.6.1.4.1.5597.3.4.3.1 | DisplayString | read-write | EMail address to send alerts etc. to (receiving address) |
| STR mbgLtCfgEMailFrom | 1.3.6.1.4.1.5597.3.4.3.2 | DisplayString | read-write | EMail address to send alerts etc. from (sending address) |
| STR mbgLtCfgEMailSmarthost | 1.3.6.1.4.1.5597.3.4.3.3 | DisplayString | read-write | SMTP smarthost used to send mail |
| mbgLtCfgSNMP | 1.3.6.1.4.1.5597.3.4.4 | |||
| STR mbgLtCfgSNMPTrapReceiver1 | 1.3.6.1.4.1.5597.3.4.4.1 | DisplayString | read-write | First SNMP trap receiver host |
| STR mbgLtCfgSNMPTrapReceiver2 | 1.3.6.1.4.1.5597.3.4.4.2 | DisplayString | read-write | Second SNMP trap receiver host |
| STR mbgLtCfgSNMPTrapRec1Community | 1.3.6.1.4.1.5597.3.4.4.3 | DisplayString | read-write | First SNMP trap receiver community |
| STR mbgLtCfgSNMPTrapRec2Community | 1.3.6.1.4.1.5597.3.4.4.4 | DisplayString | read-write | Second SNMP trap receiver community |
| STR mbgLtCfgSNMPReadOnlyCommunity | 1.3.6.1.4.1.5597.3.4.4.5 | DisplayString | read-write | SNMP community string for read-only access |
| STR mbgLtCfgSNMPReadWriteCommunity | 1.3.6.1.4.1.5597.3.4.4.6 | DisplayString | read-write | SNMP community string for read-write access |
| STR mbgLtCfgSNMPContact | 1.3.6.1.4.1.5597.3.4.4.7 | DisplayString | read-write | SNMP contact string for Lantime |
| STR mbgLtCfgSNMPLocation | 1.3.6.1.4.1.5597.3.4.4.8 | DisplayString | read-write | SNMP location string for Lantime |
| mbgLtCfgWinpopup | 1.3.6.1.4.1.5597.3.4.5 | |||
| STR mbgLtCfgWMailAddress1 | 1.3.6.1.4.1.5597.3.4.5.1 | DisplayString | read-write | First windows popup alert receiver |
| STR mbgLtCfgWMailAddress2 | 1.3.6.1.4.1.5597.3.4.5.2 | DisplayString | read-write | Second windows popup alert receiver |
| mbgLtCfgWalldisplay | 1.3.6.1.4.1.5597.3.4.6 | |||
| STR mbgLtCfgVP100Display1IP | 1.3.6.1.4.1.5597.3.4.6.1 | DisplayString | read-write | IP address of first VP100 wall display |
| STR mbgLtCfgVP100Display1SN | 1.3.6.1.4.1.5597.3.4.6.2 | DisplayString | read-write | Serial number of first VP100 wall display |
| STR mbgLtCfgVP100Display2IP | 1.3.6.1.4.1.5597.3.4.6.3 | DisplayString | read-write | IP address of second VP100 wall display |
| STR mbgLtCfgVP100Display2SN | 1.3.6.1.4.1.5597.3.4.6.4 | DisplayString | read-write | Serial number of second VP100 wall display |
| mbgLtCfgNotify | 1.3.6.1.4.1.5597.3.4.7 | |||
| STR mbgLtCfgNotifyNTPNotSync | 1.3.6.1.4.1.5597.3.4.7.1 | DisplayString | read-write | Which alerts are sent in case of a NTP_not_sync event |
| STR mbgLtCfgNotifyNTPStopped | 1.3.6.1.4.1.5597.3.4.7.2 | DisplayString | read-write | Which alerts are sent in case of a NTP_stopped event |
| STR mbgLtCfgNotifyServerBoot | 1.3.6.1.4.1.5597.3.4.7.3 | DisplayString | read-write | Which alerts are sent in case of a server_boot event |
| STR mbgLtCfgNotifyRefclkNoResponse | 1.3.6.1.4.1.5597.3.4.7.4 | DisplayString | read-write | Which alerts are sent in case of a refclock_not_responding event |
| STR mbgLtCfgNotifyRefclockNotSync | 1.3.6.1.4.1.5597.3.4.7.5 | DisplayString | read-write | Which alerts are sent in case of a refclock_not_sync event |
| STR mbgLtCfgNotifyAntennaFaulty | 1.3.6.1.4.1.5597.3.4.7.6 | DisplayString | read-write | Which alerts are sent in case of an antenna_faulty event |
| STR mbgLtCfgNotifyAntennaReconnect | 1.3.6.1.4.1.5597.3.4.7.7 | DisplayString | read-write | Which alerts are sent in case of an antenna_reconnect event |
| STR mbgLtCfgNotifyConfigChanged | 1.3.6.1.4.1.5597.3.4.7.8 | DisplayString | read-write | Which alerts are sent in case of a config_changed event |
| STR mbgLtCfgNotifySHSTimeLimitError | 1.3.6.1.4.1.5597.3.4.7.9 | DisplayString | read-write | Which alerts are sent in case of a SHS_timelimiterror event |
| STR mbgLtCfgNotifyLeapSecond | 1.3.6.1.4.1.5597.3.4.7.10 | DisplayString | read-write | Which alerts are sent in case of a Leap_Second_Announced event |
| mbgLtCfgEthernet | 1.3.6.1.4.1.5597.3.4.8 | |||
| mbgLtCfgEthernetIf0 | 1.3.6.1.4.1.5597.3.4.8.0 | |||
| STR mbgLtCfgEthernetIf0IPv4IP | 1.3.6.1.4.1.5597.3.4.8.0.1 | DisplayString | read-write | The IPv4 address of the first ethernet interface |
| STR mbgLtCfgEthernetIf0IPv4Netmask | 1.3.6.1.4.1.5597.3.4.8.0.2 | DisplayString | read-write | The IPv4 netmask of the first ethernet interface |
| STR mbgLtCfgEthernetIf0IPv4Gateway | 1.3.6.1.4.1.5597.3.4.8.0.3 | DisplayString | read-write | The IPv4 gateway address of the first ethernet interface |
| INT mbgLtCfgEthernetIf0DHCPClient | 1.3.6.1.4.1.5597.3.4.8.0.4 | INTEGER | read-write | Is DHCP used to get IP parameters for this interface |
| STR mbgLtCfgEthernetIf0IPv6IP1 | 1.3.6.1.4.1.5597.3.4.8.0.5 | DisplayString | read-write | The first IPv6 address of the first ethernet interface |
| STR mbgLtCfgEthernetIf0IPv6IP2 | 1.3.6.1.4.1.5597.3.4.8.0.6 | DisplayString | read-write | The second IPv6 address of the first ethernet interface |
| STR mbgLtCfgEthernetIf0IPv6IP3 | 1.3.6.1.4.1.5597.3.4.8.0.7 | DisplayString | read-write | The third IPv6 address of the first ethernet interface |
| INT mbgLtCfgEthernetIf0IPv6Autoconf | 1.3.6.1.4.1.5597.3.4.8.0.8 | INTEGER | read-write | Is IPv6 Autoconf used for this interface |
| INT mbgLtCfgEthernetIf0NetLinkMode | 1.3.6.1.4.1.5597.3.4.8.0.9 | INTEGER | read-write | Link mode for this interface |
| mbgLtCfgEthernetIf1 | 1.3.6.1.4.1.5597.3.4.8.1 | |||
| STR mbgLtCfgEthernetIf1IPv4IP | 1.3.6.1.4.1.5597.3.4.8.1.1 | DisplayString | read-write | The IPv4 address of the second ethernet interface |
| STR mbgLtCfgEthernetIf1IPv4Netmask | 1.3.6.1.4.1.5597.3.4.8.1.2 | DisplayString | read-write | The IPv4 netmask of the second ethernet interface |
| STR mbgLtCfgEthernetIf1IPv4Gateway | 1.3.6.1.4.1.5597.3.4.8.1.3 | DisplayString | read-write | The IPv4 gateway address of the second ethernet interface |
| INT mbgLtCfgEthernetIf1DHCPClient | 1.3.6.1.4.1.5597.3.4.8.1.4 | INTEGER | read-write | Is DHCP used to get IP parameters for this interface |
| STR mbgLtCfgEthernetIf1IPv6IP1 | 1.3.6.1.4.1.5597.3.4.8.1.5 | DisplayString | read-write | The first IPv6 address of the second ethernet interface |
| STR mbgLtCfgEthernetIf1IPv6IP2 | 1.3.6.1.4.1.5597.3.4.8.1.6 | DisplayString | read-write | The second IPv6 address of the second ethernet interface |
| STR mbgLtCfgEthernetIf1IPv6IP3 | 1.3.6.1.4.1.5597.3.4.8.1.7 | DisplayString | read-write | The third IPv6 address of the second ethernet interface |
| INT mbgLtCfgEthernetIf1IPv6Autoconf | 1.3.6.1.4.1.5597.3.4.8.1.8 | INTEGER | read-write | Is IPv6 Autoconf used for this interface |
| INT mbgLtCfgEthernetIf1NetLinkMode | 1.3.6.1.4.1.5597.3.4.8.1.9 | INTEGER | read-write | Link mode for this interface |
| mbgLtCfgEthernetIf2 | 1.3.6.1.4.1.5597.3.4.8.2 | |||
| STR mbgLtCfgEthernetIf2IPv4IP | 1.3.6.1.4.1.5597.3.4.8.2.1 | DisplayString | read-write | The IPv4 address of the third ethernet interface |
| STR mbgLtCfgEthernetIf2IPv4Netmask | 1.3.6.1.4.1.5597.3.4.8.2.2 | DisplayString | read-write | The IPv4 netmask of the third ethernet interface |
| STR mbgLtCfgEthernetIf2IPv4Gateway | 1.3.6.1.4.1.5597.3.4.8.2.3 | DisplayString | read-write | The IPv4 gateway address of the third ethernet interface |
| INT mbgLtCfgEthernetIf2DHCPClient | 1.3.6.1.4.1.5597.3.4.8.2.4 | INTEGER | read-write | Is DHCP used to get IP parameters for this interface |
| STR mbgLtCfgEthernetIf2IPv6IP1 | 1.3.6.1.4.1.5597.3.4.8.2.5 | DisplayString | read-write | The first IPv6 address of the third ethernet interface |
| STR mbgLtCfgEthernetIf2IPv6IP2 | 1.3.6.1.4.1.5597.3.4.8.2.6 | DisplayString | read-write | The second IPv6 address of the third ethernet interface |
| STR mbgLtCfgEthernetIf2IPv6IP3 | 1.3.6.1.4.1.5597.3.4.8.2.7 | DisplayString | read-write | The third IPv6 address of the third ethernet interface |
| INT mbgLtCfgEthernetIf2IPv6Autoconf | 1.3.6.1.4.1.5597.3.4.8.2.8 | INTEGER | read-write | Is IPv6 Autoconf used for this interface |
| INT mbgLtCfgEthernetIf2NetLinkMode | 1.3.6.1.4.1.5597.3.4.8.2.9 | INTEGER | read-write | Link mode for this interface |
| mbgLtCfgEthernetIf3 | 1.3.6.1.4.1.5597.3.4.8.3 | |||
| STR mbgLtCfgEthernetIf3IPv4IP | 1.3.6.1.4.1.5597.3.4.8.3.1 | DisplayString | read-write | The IPv4 address of the fourth ethernet interface |
| STR mbgLtCfgEthernetIf3IPv4Netmask | 1.3.6.1.4.1.5597.3.4.8.3.2 | DisplayString | read-write | The IPv4 netmask of the fourth ethernet interface |
| STR mbgLtCfgEthernetIf3IPv4Gateway | 1.3.6.1.4.1.5597.3.4.8.3.3 | DisplayString | read-write | The IPv4 gateway address of the fourth ethernet interface |
| INT mbgLtCfgEthernetIf3DHCPClient | 1.3.6.1.4.1.5597.3.4.8.3.4 | INTEGER | read-write | Is DHCP used to get IP parameters for this interface |
| STR mbgLtCfgEthernetIf3IPv6IP1 | 1.3.6.1.4.1.5597.3.4.8.3.5 | DisplayString | read-write | The first IPv6 address of the fourth ethernet interface |
| STR mbgLtCfgEthernetIf3IPv6IP2 | 1.3.6.1.4.1.5597.3.4.8.3.6 | DisplayString | read-write | The second IPv6 address of the fourth ethernet interface |
| STR mbgLtCfgEthernetIf3IPv6IP3 | 1.3.6.1.4.1.5597.3.4.8.3.7 | DisplayString | read-write | The third IPv6 address of the fourth ethernet interface |
| INT mbgLtCfgEthernetIf3IPv6Autoconf | 1.3.6.1.4.1.5597.3.4.8.3.8 | INTEGER | read-write | Is IPv6 Autoconf used for this interface |
| INT mbgLtCfgEthernetIf3NetLinkMode | 1.3.6.1.4.1.5597.3.4.8.3.9 | INTEGER | read-write | Link mode for this interface |
| mbgLtCfgEthernetIf4 | 1.3.6.1.4.1.5597.3.4.8.4 | |||
| STR mbgLtCfgEthernetIf4IPv4IP | 1.3.6.1.4.1.5597.3.4.8.4.1 | DisplayString | read-write | The IPv4 address of the fifth ethernet interface |
| STR mbgLtCfgEthernetIf4IPv4Netmask | 1.3.6.1.4.1.5597.3.4.8.4.2 | DisplayString | read-write | The IPv4 netmask of the fifth ethernet interface |
| STR mbgLtCfgEthernetIf4IPv4Gateway | 1.3.6.1.4.1.5597.3.4.8.4.3 | DisplayString | read-write | The IPv4 gateway address of the fifth ethernet interface |
| INT mbgLtCfgEthernetIf4DHCPClient | 1.3.6.1.4.1.5597.3.4.8.4.4 | INTEGER | read-write | Is DHCP used to get IP parameters for this interface |
| STR mbgLtCfgEthernetIf4IPv6IP1 | 1.3.6.1.4.1.5597.3.4.8.4.5 | DisplayString | read-write | The first IPv6 address of the fifth ethernet interface |
| STR mbgLtCfgEthernetIf4IPv6IP2 | 1.3.6.1.4.1.5597.3.4.8.4.6 | DisplayString | read-write | The second IPv6 address of the fifth ethernet interface |
| STR mbgLtCfgEthernetIf4IPv6IP3 | 1.3.6.1.4.1.5597.3.4.8.4.7 | DisplayString | read-write | The third IPv6 address of the fifth ethernet interface |
| INT mbgLtCfgEthernetIf4IPv6Autoconf | 1.3.6.1.4.1.5597.3.4.8.4.8 | INTEGER | read-write | Is IPv6 Autoconf used for this interface |
| INT mbgLtCfgEthernetIf4NetLinkMode | 1.3.6.1.4.1.5597.3.4.8.4.9 | INTEGER | read-write | Link mode for this interface |
| mbgLtCfgEthernetIf5 | 1.3.6.1.4.1.5597.3.4.8.5 | |||
| STR mbgLtCfgEthernetIf5IPv4IP | 1.3.6.1.4.1.5597.3.4.8.5.1 | DisplayString | read-write | The IPv4 address of the sixth ethernet interface |
| STR mbgLtCfgEthernetIf5IPv4Netmask | 1.3.6.1.4.1.5597.3.4.8.5.2 | DisplayString | read-write | The IPv4 netmask of the sixth ethernet interface |
| STR mbgLtCfgEthernetIf5IPv4Gateway | 1.3.6.1.4.1.5597.3.4.8.5.3 | DisplayString | read-write | The IPv4 gateway address of the sixth ethernet interface |
| INT mbgLtCfgEthernetIf5DHCPClient | 1.3.6.1.4.1.5597.3.4.8.5.4 | INTEGER | read-write | Is DHCP used to get IP parameters for this interface |
| STR mbgLtCfgEthernetIf5IPv6IP1 | 1.3.6.1.4.1.5597.3.4.8.5.5 | DisplayString | read-write | The first IPv6 address of the sixth ethernet interface |
| STR mbgLtCfgEthernetIf5IPv6IP2 | 1.3.6.1.4.1.5597.3.4.8.5.6 | DisplayString | read-write | The second IPv6 address of the sixth ethernet interface |
| STR mbgLtCfgEthernetIf5IPv6IP3 | 1.3.6.1.4.1.5597.3.4.8.5.7 | DisplayString | read-write | The third IPv6 address of the sixth ethernet interface |
| INT mbgLtCfgEthernetIf5IPv6Autoconf | 1.3.6.1.4.1.5597.3.4.8.5.8 | INTEGER | read-write | Is IPv6 Autoconf used for this interface |
| INT mbgLtCfgEthernetIf5NetLinkMode | 1.3.6.1.4.1.5597.3.4.8.5.9 | INTEGER | read-write | Link mode for this interface |
| mbgLtCfgEthernetIf6 | 1.3.6.1.4.1.5597.3.4.8.6 | |||
| STR mbgLtCfgEthernetIf6IPv4IP | 1.3.6.1.4.1.5597.3.4.8.6.1 | DisplayString | read-write | The IPv4 address of the seventh ethernet interface |
| STR mbgLtCfgEthernetIf6IPv4Netmask | 1.3.6.1.4.1.5597.3.4.8.6.2 | DisplayString | read-write | The IPv4 netmask of the seventh ethernet interface |
| STR mbgLtCfgEthernetIf6IPv4Gateway | 1.3.6.1.4.1.5597.3.4.8.6.3 | DisplayString | read-write | The IPv4 gateway address of the seventh ethernet interface |
| INT mbgLtCfgEthernetIf6DHCPClient | 1.3.6.1.4.1.5597.3.4.8.6.4 | INTEGER | read-write | Is DHCP used to get IP parameters for this interface |
| STR mbgLtCfgEthernetIf6IPv6IP1 | 1.3.6.1.4.1.5597.3.4.8.6.5 | DisplayString | read-write | The first IPv6 address of the seventh ethernet interface |
| STR mbgLtCfgEthernetIf6IPv6IP2 | 1.3.6.1.4.1.5597.3.4.8.6.6 | DisplayString | read-write | The second IPv6 address of the seventh ethernet interface |
| STR mbgLtCfgEthernetIf6IPv6IP3 | 1.3.6.1.4.1.5597.3.4.8.6.7 | DisplayString | read-write | The third IPv6 address of the seventh ethernet interface |
| INT mbgLtCfgEthernetIf6IPv6Autoconf | 1.3.6.1.4.1.5597.3.4.8.6.8 | INTEGER | read-write | Is IPv6 Autoconf used for this interface |
| INT mbgLtCfgEthernetIf6NetLinkMode | 1.3.6.1.4.1.5597.3.4.8.6.9 | INTEGER | read-write | Link mode for this interface |
| mbgLtCfgEthernetIf7 | 1.3.6.1.4.1.5597.3.4.8.7 | |||
| STR mbgLtCfgEthernetIf7IPv4IP | 1.3.6.1.4.1.5597.3.4.8.7.1 | DisplayString | read-write | The IPv4 address of the eighth ethernet interface |
| STR mbgLtCfgEthernetIf7IPv4Netmask | 1.3.6.1.4.1.5597.3.4.8.7.2 | DisplayString | read-write | The IPv4 netmask of the eighth ethernet interface |
| STR mbgLtCfgEthernetIf7IPv4Gateway | 1.3.6.1.4.1.5597.3.4.8.7.3 | DisplayString | read-write | The IPv4 gateway address of the eighth ethernet interface |
| INT mbgLtCfgEthernetIf7DHCPClient | 1.3.6.1.4.1.5597.3.4.8.7.4 | INTEGER | read-write | Is DHCP used to get IP parameters for this interface |
| STR mbgLtCfgEthernetIf7IPv6IP1 | 1.3.6.1.4.1.5597.3.4.8.7.5 | DisplayString | read-write | The first IPv6 address of the eighth ethernet interface |
| STR mbgLtCfgEthernetIf7IPv6IP2 | 1.3.6.1.4.1.5597.3.4.8.7.6 | DisplayString | read-write | The second IPv6 address of the eighth ethernet interface |
| STR mbgLtCfgEthernetIf7IPv6IP3 | 1.3.6.1.4.1.5597.3.4.8.7.7 | DisplayString | read-write | The third IPv6 address of the eighth ethernet interface |
| INT mbgLtCfgEthernetIf7IPv6Autoconf | 1.3.6.1.4.1.5597.3.4.8.7.8 | INTEGER | read-write | Is IPv6 Autoconf used for this interface |
| INT mbgLtCfgEthernetIf7NetLinkMode | 1.3.6.1.4.1.5597.3.4.8.7.9 | INTEGER | read-write | Link mode for this interface |
| mbgLtCfgEthernetIf8 | 1.3.6.1.4.1.5597.3.4.8.8 | |||
| STR mbgLtCfgEthernetIf8IPv4IP | 1.3.6.1.4.1.5597.3.4.8.8.1 | DisplayString | read-write | The IPv4 address of the nineth ethernet interface |
| STR mbgLtCfgEthernetIf8IPv4Netmask | 1.3.6.1.4.1.5597.3.4.8.8.2 | DisplayString | read-write | The IPv4 netmask of the nineth ethernet interface |
| STR mbgLtCfgEthernetIf8IPv4Gateway | 1.3.6.1.4.1.5597.3.4.8.8.3 | DisplayString | read-write | The IPv4 gateway address of the nineth ethernet interface |
| INT mbgLtCfgEthernetIf8DHCPClient | 1.3.6.1.4.1.5597.3.4.8.8.4 | INTEGER | read-write | Is DHCP used to get IP parameters for this interface |
| STR mbgLtCfgEthernetIf8IPv6IP1 | 1.3.6.1.4.1.5597.3.4.8.8.5 | DisplayString | read-write | The first IPv6 address of the nineth ethernet interface |
| STR mbgLtCfgEthernetIf8IPv6IP2 | 1.3.6.1.4.1.5597.3.4.8.8.6 | DisplayString | read-write | The second IPv6 address of the nineth ethernet interface |
| STR mbgLtCfgEthernetIf8IPv6IP3 | 1.3.6.1.4.1.5597.3.4.8.8.7 | DisplayString | read-write | The third IPv6 address of the nineth ethernet interface |
| INT mbgLtCfgEthernetIf8IPv6Autoconf | 1.3.6.1.4.1.5597.3.4.8.8.8 | INTEGER | read-write | Is IPv6 Autoconf used for this interface |
| INT mbgLtCfgEthernetIf8NetLinkMode | 1.3.6.1.4.1.5597.3.4.8.8.9 | INTEGER | read-write | Link mode for this interface |
| mbgLtCfgEthernetIf9 | 1.3.6.1.4.1.5597.3.4.8.9 | |||
| STR mbgLtCfgEthernetIf9IPv4IP | 1.3.6.1.4.1.5597.3.4.8.9.1 | DisplayString | read-write | The IPv4 address of the tenth ethernet interface |
| STR mbgLtCfgEthernetIf9IPv4Netmask | 1.3.6.1.4.1.5597.3.4.8.9.2 | DisplayString | read-write | The IPv4 netmask of the tenth ethernet interface |
| STR mbgLtCfgEthernetIf9IPv4Gateway | 1.3.6.1.4.1.5597.3.4.8.9.3 | DisplayString | read-write | The IPv4 gateway address of the tenth ethernet interface |
| INT mbgLtCfgEthernetIf9DHCPClient | 1.3.6.1.4.1.5597.3.4.8.9.4 | INTEGER | read-write | Is DHCP used to get IP parameters for this interface |
| STR mbgLtCfgEthernetIf9IPv6IP1 | 1.3.6.1.4.1.5597.3.4.8.9.5 | DisplayString | read-write | The first IPv6 address of the tenth ethernet interface |
| STR mbgLtCfgEthernetIf9IPv6IP2 | 1.3.6.1.4.1.5597.3.4.8.9.6 | DisplayString | read-write | The second IPv6 address of the tenth ethernet interface |
| STR mbgLtCfgEthernetIf9IPv6IP3 | 1.3.6.1.4.1.5597.3.4.8.9.7 | DisplayString | read-write | The third IPv6 address of the tenth ethernet interface |
| INT mbgLtCfgEthernetIf9IPv6Autoconf | 1.3.6.1.4.1.5597.3.4.8.9.8 | INTEGER | read-write | Is IPv6 Autoconf used for this interface |
| INT mbgLtCfgEthernetIf9NetLinkMode | 1.3.6.1.4.1.5597.3.4.8.9.9 | INTEGER | read-write | Link mode for this interface |
| mbgLtCfgSHS | 1.3.6.1.4.1.5597.3.4.9 | |||
| I32 mbgLtCfgSHSCritLimit | 1.3.6.1.4.1.5597.3.4.9.1 | Integer32 | read-write | Max. number of milliseconds the two SHS references can differ before a SHS Critical Timelimit error is issued |
| I32 mbgLtCfgSHSWarnLimit | 1.3.6.1.4.1.5597.3.4.9.2 | Integer32 | read-write | Max. number of milliseconds the two SHS references can differ before a SHS Warning Timelimit error is issued |
| mbgLtCfgMRS | 1.3.6.1.4.1.5597.3.4.10 | |||
| STR mbgLtCfgMRSRefPriority | 1.3.6.1.4.1.5597.3.4.10.1 | DisplayString | read-write | Priority of MRS Reference Sources, as a comma-separated list |
| mbgLtCmd | 1.3.6.1.4.1.5597.3.5 | |||
| INT mbgLtCmdExecute | 1.3.6.1.4.1.5597.3.5.1 | INTEGER | read-write | Send a command to the timeserver to be executed |
| STR mbgLtCmdSetRefTime | 1.3.6.1.4.1.5597.3.5.2 | DisplayString | read-write | Set the time of the reference clock and the LANTIME itself |
| mbgLtPtp | 1.3.6.1.4.1.5597.3.10 | |||
| STR mbgLtPtpMode | 1.3.6.1.4.1.5597.3.10.1 | DisplayString | read-only | Display current PTPv2 modus as string |
| INT mbgLtPtpModeVal | 1.3.6.1.4.1.5597.3.10.2 | INTEGER | read-only | Display current PTPv2 modus as integer |
| STR mbgLtPtpPortState | 1.3.6.1.4.1.5597.3.10.3 | DisplayString | read-only | Current PTPv2 port state as string |
| INT mbgLtPtpPortStateVal | 1.3.6.1.4.1.5597.3.10.4 | INTEGER | read-only | Current PTPv2 port state as integer |
| STR mbgLtPtpOffsetFromGM | 1.3.6.1.4.1.5597.3.10.5 | DisplayString | read-only | Current PTPv2 offset from grandmaster as string |
| I32 mbgLtPtpOffsetFromGMVal | 1.3.6.1.4.1.5597.3.10.6 | Integer32 | read-only | Current PTPv2 offset from grandmaster in nanoseconds |
| STR mbgLtPtpDelay | 1.3.6.1.4.1.5597.3.10.7 | DisplayString | read-only | shows the current network delay in nanoseconds as string |
| I32 mbgLtPtpDelayVal | 1.3.6.1.4.1.5597.3.10.8 | Integer32 | read-only | shows the current network delay in nanoseconds |
| mbgLtFdm | 1.3.6.1.4.1.5597.3.11 | |||
| I32 mbgLtFdmPlFreq | 1.3.6.1.4.1.5597.3.11.1 | Integer32 | read-only | shows the current powerline frequency in mHz as an Integer32 value |
| I32 mbgLtFdmFreqDev | 1.3.6.1.4.1.5597.3.11.2 | Integer32 | read-only | shows the current frequency deviation in mHz as an Integer32 value |
| I32 mbgLtFdmNomFreq | 1.3.6.1.4.1.5597.3.11.3 | Integer32 | read-only | shows the nominal frequency in mHz as an Integer32 value |
| mbgLtConformance | 1.3.6.1.4.1.5597.3.90 | |||
| mbgLtCompliances | 1.3.6.1.4.1.5597.3.90.1 | |||
| mbgLtCompliance | 1.3.6.1.4.1.5597.3.90.1.1 | The compliance statement for SNMP entities which implement version 2 of the LANTIME MIB | ||
| mbgLtGroups | 1.3.6.1.4.1.5597.3.90.2 | |||
| mbgLtObjectsGroup | 1.3.6.1.4.1.5597.3.90.2.1 | The collection of objects for the LANTIME MIB | ||
| mbgLtTrapsGroup | 1.3.6.1.4.1.5597.3.90.2.2 | The collection of traps for the LANTIME MIB |
RFC description
Meinberg LANTIME SNMP MIB for monitoring and managing Meinberg LANTIME time synchronization and NTP/PTP devices.
Start monitoring Meinberg LanTime network time server with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.