GBNPlatformOAMSntpClient-MIB

All MIBs › GBNPlatformOAMSntpClient-MIB

Organization: Greentech

Last Updated: 2001-07-15

Category: Protocol: NTP, Technology: Time Synchronization, Vendor: Greentech

Description: Greentech OAM MIB for SNTP client configuration, server settings, and time synchronization status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is GBNPlatformOAMSntpClient-MIB?

GBNPlatformOAMSntpClient-MIB is a Greentech Platform OAM MIB module that defines managed objects for configuring the device's SNTP (Simple Network Time Protocol) client, including time-server addresses, polling interval, and synchronization mode. It exposes configuration data alongside operational status indicating whether the device's clock is currently synchronized to its configured time source. Its monitoring relevance is centered on software/system status -- primarily whether time synchronization is functioning, since a device with a drifted or unsynchronized clock can produce misleading timestamps in logs, alarms, and performance counters across the rest of the system. As a client-side implementation of a standard time-sync protocol, it conceptually parallels (though does not necessarily reuse the OIDs of) the IETF/RFC-based SNTP and NTP specifications. It is typically deployed on Greentech routers, switches, or gateways where accurate device time is needed for correlating logged events and alarms, typically after a GBNPlatformOAMSntpClient-MIB download to load the module into a MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in GBNPlatformOAMSntpClient-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Greentech network device (router/switch/gateway)

Monitoring Examples

No sample object or table names are provided for this module (sample_objects is empty); the module description is limited to 'SNTP mib definition.' A concrete monitoring scenario cannot be honestly built from confirmed object names, though the module plausibly exposes an SNTP server address, poll interval, and a synchronization-status flag consistent with its stated purpose.

What Can Be Monitored

SNTP server configuration
time synchronization status
clock polling interval

Imported Objects

From GBNPlatformOAM-MIB

gbnPlatformOAM

MODULE-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
gbnPlatformOAMSntpClient	1.3.6.1.4.1.13464.1.2.1.1.8			SNTP mib definition.
sntpClientGeneral	1.3.6.1.4.1.13464.1.2.1.1.8.1
INT sntpClientMode	1.3.6.1.4.1.13464.1.2.1.1.8.1.1	INTEGER	read-write	SNTP client work
INT sntpClientPollInterval	1.3.6.1.4.1.13464.1.2.1.1.8.1.2	INTEGER	read-write	Send the request interval, for unicast and broadcast any way
INT sntpClientRetransInterval	1.3.6.1.4.1.13464.1.2.1.1.8.1.3	INTEGER	read-write	Client request retransmission interval
INT sntpClientRetransTimes	1.3.6.1.4.1.13464.1.2.1.1.8.1.4	INTEGER	read-write	Client does not receive the response, the number of retransmission requests for unicast and broadcast any way
IP sntpClientServer	1.3.6.1.4.1.13464.1.2.1.1.8.1.5	IpAddress	read-write	Are using the server address for the unicast and broadcast any way.
T/F sntpClientSynthFlag	1.3.6.1.4.1.13464.1.2.1.1.8.1.6	TruthValue	read-only	Whether the time the client is synchronized.
INT sntpClientState	1.3.6.1.4.1.13464.1.2.1.1.8.1.7	INTEGER	read-only	The current state of the client, idle state or wait for a response message status.
I32 sntpClientLastSynthTime	1.3.6.1.4.1.13464.1.2.1.1.8.1.8	Integer32	read-only	The last time the client synchronized time.
INT sntpClientLastSynthErrno	1.3.6.1.4.1.13464.1.2.1.1.8.1.9	INTEGER	read-only	If the client fails the last time synchronization error code.
INT sntpClientAdminStatus	1.3.6.1.4.1.13464.1.2.1.1.8.1.10	INTEGER	read-write	Clients open and closed.
INT sntpClientBcastDelay	1.3.6.1.4.1.13464.1.2.1.1.8.1.11	INTEGER	read-write	Working in broadcast client mode, the estimated transmission delay (milliseconds).
INT sntpClientMcastTtl	1.3.6.1.4.1.13464.1.2.1.1.8.1.12	INTEGER	read-write	Work in multicast client mode, the TTL value.
T/F sntpClientAuthFlag	1.3.6.1.4.1.13464.1.2.1.1.8.1.13	TruthValue	read-write	authentication enable flag
U32 sntpClientUniKeyID	1.3.6.1.4.1.13464.1.2.1.1.8.1.14	Unsigned32	read-write	in client/server mode, client send request with this keyID
U32 sntpClientAnyKeyID	1.3.6.1.4.1.13464.1.2.1.1.8.1.15	Unsigned32	read-write	in anycast mode, client send request with this keyID
sntpClientValidServerTable	1.3.6.1.4.1.13464.1.2.1.1.8.2		not-accessible	Legitimate server segment table, SNTP packets according to time table to check the source address, only the source address is located in this newspaper literary talent in this table as legitimate messages, or discarded. Equivalent to access control lists.
sntpClientValidServerEntry	1.3.6.1.4.1.13464.1.2.1.1.8.2.1		not-accessible	Definition of a legitimate server list.
IP sntpClientValidServerNet	1.3.6.1.4.1.13464.1.2.1.1.8.2.1.1	IpAddress	read-only	Source address of the subnet number.
IP sntpClientValidServerMask	1.3.6.1.4.1.13464.1.2.1.1.8.2.1.2	IpAddress	read-only	Source address of the subnet mask.
ROW sntpClientValidServerRowStatus	1.3.6.1.4.1.13464.1.2.1.1.8.2.1.3	RowStatus	read-write	Line state.
sntpAuthKeyTable	1.3.6.1.4.1.13464.1.2.1.1.8.3		not-accessible	keys userd for SNTP authentication
sntpAuthKeyEntry	1.3.6.1.4.1.13464.1.2.1.1.8.3.1		not-accessible	define a key item.
U32 sntpAuthKeyId	1.3.6.1.4.1.13464.1.2.1.1.8.3.1.1	Unsigned32	read-only	key number
STR sntpAuthKeyValue	1.3.6.1.4.1.13464.1.2.1.1.8.3.1.2	DisplayString	read-write	key value
T/F sntpAuthKeyTrustFlag	1.3.6.1.4.1.13464.1.2.1.1.8.3.1.3	TruthValue	read-write	whether the key is trusted
ROW sntpAuthKeyRowStatus	1.3.6.1.4.1.13464.1.2.1.1.8.3.1.4	RowStatus	read-write	row status

RFC description

Greenbone Networks platform SNTP client OAM MIB providing management of SNTP (Simple Network Time Protocol) clients on GBN platform equipment (vendor-private).

Start monitoring Greentech (GBN) managed network device (SNTP client) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download GBNPlatformOAMSntpClient-MIB

What Is GBNPlatformOAMSntpClient-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description