Description: Returns the maximum amount of additional memory, in bytes, that can be dedicated to holding PDL permanent soft resources. Additional information: The following numbers assume that IO-BUFFERING=eOff; if IO-BUFFERING<>eOff, the following numbers will be reduced by the value of IO-BUFFER-SIZE. Memory for resource saving is allocated in increments of 102400 bytes. Therefore, for each 1M (1048576 bytes) of memory added to the printer, 102400 bytes are made available to resource saving (and I/O buffering) and 24576 bytes are retained until an additional 102400 byte block can be made available. The value reported by this object is always rounded down to the nearest multiple of 102400. For a PCL-only printer, the value of this object is zero (all resource saving memory is dedicated to PCL). The table below describes the memory available for Resource Saving with PostScript Installed, assuming that no other personality resource or I/O buffering is being done. Total RAM Minimum Maximum Default 2 N/A N/A N/A 3 N/A N/A N/A 4 N/A N/A N/A 5 N/A N/A N/A 6 N/A N/A N/A 7 N/A N/A N/A 8 N/A N/A N/A 9 N/A N/A N/A 10 N/A N/A N/A 11 N/A N/A N/A 12 0K 1000K 800K 13 0K 2000K 1000K 14 N/A N/A N/A 15 0K 4000K 1400K 16 N/A N/A N/A 17 N/A N/A N/A 18 N/A N/A N/A 19 0K 8100K 2200K 20 0K 9200K 2400K 21 0K 10200K 2600K 22 N/A N/A N/A 23 0K 12200K 3000K 24 N/A N/A N/A 25 N/A N/A N/A 26 N/A N/A N/A 23 0K 16300K 3800K