LaserJet6P-MIB :: io_buffer_size

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsLaserJet6P-MIBio_buffer_size

io_buffer_size

Module: LaserJet6P-MIB

OID (symbolic): LaserJet6P-MIB::io_buffer_size

OID (numeric): 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Returns or configures the amount of memory, in bytes, dedicated to I/O print job data buffering. Attempting to set to an unsupported value causes the device to use the closest supported value. Each device POS should document the list of supported values. Additional information: In LaserJet 6P the minimum supported value is 10,240. The maximum supported value is dependent on total memory installed and the amount of memory currently being used by other memory consumers. The buffer size must be a multiple of 1024, with the minimum value being 10,240. Setting to an unsupported value causes the printer to substitute the nearest value that is a multiple of 10,240 (if <100K) or 102,400 (if > 100K) and to return status. Examples of substituted values: <= 15,360 will snap to 10,240 > 15,360 and <= 25,600 will snap to 20,480 > 25,600 and <= 35,840 will snap to 30,720 > 35,840 and <= 46,080 will snap to 40,960 > 46,080 and <= 56,320 will snap to 51,200 > 56,320 and <= 66,560 will snap to 61,440 > 66,560 and <= 76,800 will snap to 71,680 > 76,800 and <= 87,040 will snap to 81,920 > 87,040 and <= 97,280 will snap to 92,160 > 97,280 and <= 153,600 will snap to 102,400 > 153,600 and <= 256,000 will snap to 204,800 > 256,000 and <= 358,400 will snap to 307,200 > 358,400 and <= 460,800 will snap to 409,600 > 460,800 and <= 563,200 will snap to 512,000 > 563,200 and <= 665,600 will snap to 614,400 > 665,600 and <= 768,000 will snap to 716,800 > 768,000 and <= 870,400 will snap to 819,200 > 870,400 and <= 972,800 will snap to 921,600 > 972,800 and <= 1,075,200 will snap to 1,024,000 > 1,075,200 and <= 1,177,600 will snap to 1,126,400 > 1,177,600 and <= 1,280,000 will snap to 1,228,800 etc. up to the maximum supported amount of memory. Attempting to set this object when IO-BUFFERING is eOff will cause a status of to be returned. When IO-BUFFERING is eOff, reading this object will return a value of zero. In base memory (2MB) the IO-BUFFER is eAuto, the IO-BUFFER-SIZE will be 0, if IO-BUFFER is turned eOn, then the IO-BUFFER-SIZE will be 10,240

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.6
snmpwalk -v2c -c public <target> LaserJet6P-MIB::io_buffer_size

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.6.1
snmpget -v2c -c public <target> LaserJet6P-MIB::io_buffer_size.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.6.1 i <value>

Start monitoring HP LaserJet printers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LaserJet6P-MIB::io_buffer_size OID value, configure state conditions and alerts, and monitor any HP LaserJet printers from a single console.

OID Breakdown

Upper-level ancestors (16 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.3hpsystemCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9net_peripheralCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4netdmCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4.2dmCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4.2.1deviceCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4.2.1.2source_subsystemCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4.2.1.2.1ioCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1settings_ioCLJ8500-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.6io_buffer_sizeLaserJet6P-MIB