Description: The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job has requested binding, cBindingError will be set in NOT- READY-DESTINATION-PRINT-ENGINE. Additional information: This is a read only object that returns the number of 20# pages that this bin can bind(i.e. staple). This number is used by the host applications to prevent jobs that exceed this amount from being sent to this bin. If this bin does not have a finishing function like stapling where this object is necessary the object will return 0. OUTBIN3 is the topmost bin on the output device. This bin replaces the left output bin on the base printer. OUTBIN4 through OUTBIN8 are the additional 5 regular bins supplied by the MBM5S device. OUTBIN9 is the stapler unit and is the lowest bin in the device. NOTE: Because HP is marketing a device with a max of 7 bins (MBM5S) the OUTBINn-MAXIMUM-BINDING objects are 3-9 but the external device specification requires support of up to 315 output bins. Therefore if these bins exist above 7, then the coresponding objects will also exist OUTBIN10-MAXIMUM-BINDING through OUTBIN317-MAXIMUM-BINDING.