All MIBs › LaserJet-5-MIB › pcl_resource_saving_memory_size
pcl_resource_saving_memory_size
Module: LaserJet-5-MIB
OID (symbolic): LaserJet-5-MIB::pcl_resource_saving_memory_size
OID (numeric): 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Returns or changes the amount of resource saving memory set aside to hold permanent soft PCL resources. Additional information: The value returned by this object is the amount of Resource Saving memory currently dedicated to PCL, regardless of the value of RESOURCE-SAVING. For a PCL-only printer, the value of this object is zero. All memory is dedicated to PCL, but it is not shown as such. If PostScript is installed without a duplex unit, the default value of this object is as follows: Zero if <7M memory is installed. Zero if 7M memory is installed and RESOURCE-SAVING=eOff. 409600 if 7 memory is installed and RESOURCE-SAVING=eOn. 409600 if 7M memory is installed and RESOURCE-SAVING=eAuto; plus 102400 for each 1M over 7M memory installed. If PostScript is installed with a duplex unit, the default value of this object is as follows: Zero if <13M memory is installed. Zero if 13M memory is installed and RESOURCE-SAVING=eOff. 409600 if 13M memory is installed and RESOURCE-SAVING=eOn. 409600 if 13M memory is installed and RESOURCE-SAVING=eAuto; plus 102400 for each 1M over 13M memory installed. If RESOURCE-SAVING=eOn, this object can be used to set the amount of Resource Saving memory currently dedicated to PCL. The values supported are zero (to turn resource saving off for PCL) and 409600 through 409600 plus the value of MAXIMUM-RESOURCE-SAVING-MEMORY, in increments of 102400. If a value is received that is between 1 and 409599, it will be snapped to 409600 and a status of
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.2 snmpwalk -v2c -c public <target> LaserJet-5-MIB::pcl_resource_saving_memory_size
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.2.1 snmpget -v2c -c public <target> LaserJet-5-MIB::pcl_resource_saving_memory_size.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.2.1 i <value>
Start monitoring HP LaserJet 5 printer with JetDirect network interface with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LaserJet-5-MIB::pcl_resource_saving_memory_size OID value, configure state conditions and alerts, and monitor any HP LaserJet 5 printer with JetDirect network interface from a single console.
OID Breakdown
Upper-level ancestors (16 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9 | net_peripheral | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4 | netdm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2 | dm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1 | device | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3 | processing_subsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3 | pdl | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3 | pdl_pcl | CLJ8500-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.2 | pcl_resource_saving_memory_size | LaserJet-5-MIB |