HUAWEI-BFD-MIB

All MIBs › HUAWEI-BFD-MIB

Organization: Organization.

Last Updated: 2006-12-27

Category: Routing Protocols, Vendor: Huawei

Description: Huawei BFD (Bidirectional Forwarding Detection) MIB for monitoring and configuring fast failure detection sessions for routing protocols.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-BFD-MIB?

HUAWEI-BFD-MIB is a Huawei enterprise MIB for Bidirectional Forwarding Detection (BFD), a lightweight protocol used to rapidly detect faults in the forwarding path between two adjacent devices, typically to trigger fast failover in routing protocols. No detailed module description or sample objects were available for this MIB beyond a placeholder description, so exact object/table names cannot be confirmed here. Its intended monitoring value is software/protocol session status: tracking BFD session state (up/down), detection timers, and session identifiers to confirm sub-second fault detection is functioning between peer devices. It depends conceptually on the routing protocols (e.g., OSPF, BGP, static routes) that register with BFD to receive fast failure notifications. It is deployed on Huawei routers and switches in networks requiring fast convergence upon link or peer failure. Engineers can download the HUAWEI-BFD-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-BFD-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei routers and switches

Monitoring Examples

No sample objects were provided for this module, so a concrete object-level monitoring scenario cannot be responsibly constructed; in practice an operator would poll a BFD session table for session state and detection-time objects to confirm sessions are up and detecting failures within the configured interval, but the exact object/table names are unconfirmed from the available data.

Imported Objects

From HUAWEI-MIB

hwDatacomm

OBJECT-IDENTITY

From P-BRIDGE-MIB

EnabledStatus

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwBFDMIB	1.3.6.1.4.1.2011.5.25.38			Description.
hwBfdScalarsObjects	1.3.6.1.4.1.2011.5.25.38.1
U32 hwBfdVersionNumber	1.3.6.1.4.1.2011.5.25.38.1.1	Unsigned32	read-only	The current version number of the BFD protocol is 1.
ENA hwBfdAdminStatus	1.3.6.1.4.1.2011.5.25.38.1.2	EnabledStatus	read-write	Describe the administrative status of a BFD protocol. The value 'enabled' denotes that the BFD Process is active on all interface; The value 'disabled' denotes that the BFD process is disabled on all interfaces.
U32 hwBfdSessLimitNumber	1.3.6.1.4.1.2011.5.25.38.1.3	Unsigned32	read-only	Define the maximum number of BFD sessions allowed in the logic router.
U32 hwBfdSessInterfaceLimitNumber	1.3.6.1.4.1.2011.5.25.38.1.4	Unsigned32	read-only	Define the maximum number of BFD sessions allowed per board.
U32 hwBfdSessStaticNumber	1.3.6.1.4.1.2011.5.25.38.1.5	Unsigned32	read-only	The total number of BFD static sessions.
U32 hwBfdSessDynamicNumber	1.3.6.1.4.1.2011.5.25.38.1.6	Unsigned32	read-only	The total number of BFD dynamic sessions.
IP hwBfdSessGlobalDefaultIpAddr	1.3.6.1.4.1.2011.5.25.38.1.7	IpAddress	read-write	Define the default multicast IP address used in BFD multicast detection.
ENA hwBfdEchoPassiveStatus	1.3.6.1.4.1.2011.5.25.38.1.8	EnabledStatus	read-write	The passive Echo function of BFD.
U32 hwBfdEchoAclNum	1.3.6.1.4.1.2011.5.25.38.1.9	Unsigned32	read-write	The Acl Number for passive Echo function of BFD.
U32 hwBfdSessDynamicPingInterval	1.3.6.1.4.1.2011.5.25.38.1.10	Unsigned32	read-write	Define the sending interval of the MPLS echo packet. The unit is second.
ENA hwBfdSessDynamicSupportPassive	1.3.6.1.4.1.2011.5.25.38.1.11	EnabledStatus	read-write	The capability of automatically creating BFD sessions on the LSP egress 'enable'denotes that the egress can create BFD sessions; 'disabled'denotes that the egress can not create BFD sessions.
U32 hwBfdSessDelayUpTime	1.3.6.1.4.1.2011.5.25.38.1.12	Unsigned32	read-write	Define delay interval before the session turns to up. The unit is second.
I32 hwBfdSessMultiDstPort	1.3.6.1.4.1.2011.5.25.38.1.13	Integer32	read-write	The destination UDP port of multi-hop BFD session. When the administrative status of BFD protocol is disabled, this value will be 0.
I32 hwBfdTrapSendInterval	1.3.6.1.4.1.2011.5.25.38.1.14	Integer32	read-write	Define the sending interval of TRAP message. The unit is seconds.
hwBfdObjects	1.3.6.1.4.1.2011.5.25.38.2
hwBfdIfConfTable	1.3.6.1.4.1.2011.5.25.38.2.1		not-accessible	The interface configuration table of BFD entries.
hwBfdIfConfEntry	1.3.6.1.4.1.2011.5.25.38.2.1.1		not-accessible	The BFD Interface Entry describes BFD Interface.
INT hwBfdIfConfIndex	1.3.6.1.4.1.2011.5.25.38.2.1.1.1	INTEGER	not-accessible	It is the Configuration's Index of this interface.
OCT hwBfdIfConfName	1.3.6.1.4.1.2011.5.25.38.2.1.1.2	OCTET STRING	read-create	It is the name of this Interface.
I32 hwBfdIfConfEnable	1.3.6.1.4.1.2011.5.25.38.2.1.1.3	Integer32	read-only	The flag that whether the interface has enabled BFD.
I32 hwBfdIfConfDeleting	1.3.6.1.4.1.2011.5.25.38.2.1.1.4	Integer32	read-only	The flag that whether the interface is in deleting. 0:The interface is not deleted. 1:The interface is deleted
I32 hwBfdIfConfAvailable	1.3.6.1.4.1.2011.5.25.38.2.1.1.5	Integer32	read-only	The flag that whether the interface is available. 0:The interface is not available. 1:The interface is available.
I32 hwBfdIfConfSessCnt	1.3.6.1.4.1.2011.5.25.38.2.1.1.6	Integer32	read-only	The number of sessions that has been bound to this interface.
ROW hwBfdIfConfRowStatus	1.3.6.1.4.1.2011.5.25.38.2.1.1.7	RowStatus	read-create	used to manage the creation and deletion of conceptual rows.
hwBfdSessionConfTable	1.3.6.1.4.1.2011.5.25.38.2.2		not-accessible	The BFD Session Configuration Table describes the BFD sessions.
hwBfdSessionConfEntry	1.3.6.1.4.1.2011.5.25.38.2.2.1		not-accessible	The BFD Session Configuration Entry describes BFD session.
OCT hwBfdSessConfName	1.3.6.1.4.1.2011.5.25.38.2.2.1.1	OCTET STRING	not-accessible	It is the name of this Configuration model.
U32 hwBfdSessConfMIndex	1.3.6.1.4.1.2011.5.25.38.2.2.1.2	Unsigned32	read-only	It is the Configuration's Index of this session.
U32 hwBfdSessConfLocalDiscr	1.3.6.1.4.1.2011.5.25.38.2.2.1.3	Unsigned32	read-create	Define the local discriminator of the BFD session.
U32 hwBfdSessConfRemoteDiscr	1.3.6.1.4.1.2011.5.25.38.2.2.1.4	Unsigned32	read-create	Define the remote discriminator of the BFD session.
IP hwBfdSessConfPeerAddr	1.3.6.1.4.1.2011.5.25.38.2.2.1.5	IpAddress	read-create	Define the IP address of the peer in the BFD session.
U32 hwBfdSessConfBindIfIndex	1.3.6.1.4.1.2011.5.25.38.2.2.1.6	Unsigned32	read-only	It is the index of the binding interface in the BFD configuration.
OCT hwBfdSessConfBindIfName	1.3.6.1.4.1.2011.5.25.38.2.2.1.7	OCTET STRING	read-create	It is the name of the binding interface in the BFD configuration.
INT hwBfdSessConfDemandEnable	1.3.6.1.4.1.2011.5.25.38.2.2.1.8	INTEGER	read-create	It is the flag of the BFD demand mode. 0:Disable the BFD demand mode. 1:Enable the BFD demand mode.
U32 hwBfdSessConfDemandTimerInterval	1.3.6.1.4.1.2011.5.25.38.2.2.1.9	Unsigned32	read-create	Define the detecting interval in the BFD session with the demand mode. The unit is millisecond.
U32 hwBfdSessConfDetectMult	1.3.6.1.4.1.2011.5.25.38.2.2.1.10	Unsigned32	read-create	It is Detect time multiplier of the configuration. The negotiated transmit interval, multiplied by this value, provides the detection time for the transmitting system in Asynchronous mode.
NUM hwBfdSessConfDesiredMinRxInterval	1.3.6.1.4.1.2011.5.25.38.2.2.1.11	BfdInterval	read-create	This is the minimum interval of the configuration,in milliseconds, between received BFD Control packets that this system is capable of supporting.
NUM hwBfdSessConfDesiredMinTxInterval	1.3.6.1.4.1.2011.5.25.38.2.2.1.12	BfdInterval	read-create	This is the minimum interval of the configuration, in milliseconds, that the local system would like to use when transmitting BFD Control packets.
INT hwBfdSessConfWTRInterval	1.3.6.1.4.1.2011.5.25.38.2.2.1.13	INTEGER	read-create	This is the WTR interval of bfd session. The unit is minute.
INT hwBfdSessConfTOS	1.3.6.1.4.1.2011.5.25.38.2.2.1.14	INTEGER	read-create	This is the TOS value of bfd packet.
INT hwBfdSessConfPSTFlag	1.3.6.1.4.1.2011.5.25.38.2.2.1.15	INTEGER	read-create	The PST flag of the BFD session configuration.
INT hwBfdSessConfCommitFlag	1.3.6.1.4.1.2011.5.25.38.2.2.1.16	INTEGER	read-create	It is the commit flag of the configuration entry. 0: not commit 1: commit
INT hwBfdSessConfAdminStatus	1.3.6.1.4.1.2011.5.25.38.2.2.1.17	INTEGER	read-create	There may be circumstances where it is desirable to administratively enable or disable a BFD session of the configuration. The AdminStatus exists so that a session can be administratively put down indefinitely.
ROW hwBfdSessConfRowStatus	1.3.6.1.4.1.2011.5.25.38.2.2.1.18	RowStatus	read-create	used to manage the creation and deletion of conceptual rows.
IP hwBfdSessConfSourceAddr	1.3.6.1.4.1.2011.5.25.38.2.2.1.19	IpAddress	read-create	Define the source IP address of the BFD session.
U32 hwBfdSessConfVrfIndex	1.3.6.1.4.1.2011.5.25.38.2.2.1.20	Unsigned32	read-only	The index of the VPN interface.
OCT hwBfdSessConfVPNName	1.3.6.1.4.1.2011.5.25.38.2.2.1.21	OCTET STRING	read-create	The name of VPN interface.
INT hwBfdSessConfDefaultIp	1.3.6.1.4.1.2011.5.25.38.2.2.1.22	INTEGER	read-create	BFD session use default multicast IP as the detect peer-ip 1 : do not use the default multicast IP 2 : use the default multicast IP default value is 1 (do not use)
INT hwBfdSessConfPISFlag	1.3.6.1.4.1.2011.5.25.38.2.2.1.23	INTEGER	read-create	The state of BFD session is associated with the state of the binding interface 1 : do not associate with interface state 2 : associate with interface state 3 : associate with interface and correlative sub interface . default value is 1 (do not associate)
INT hwBfdSessConfBindType	1.3.6.1.4.1.2011.5.25.38.2.2.1.24	INTEGER	read-create	The binding type of the BFD session: 1: BFD for IP with peer-ip and interface; 2: BFD for IP only with peer-ip; 3: BFD for IP with peer-ip and source-ip; 4: BFD for IP with peer-ip, interface and source-ip; 5: BFD for FEC(NOT support now); 6: BFD for Tunnel interface(NOT support now); 7: BFD for OSPF; 8: BFD for ISIS; 9: BFD for LDP-LSP; 10: BFD for static LSP; 11: BFD for TE-LSP; 12: BFD for TE-Tunnel; 13: BFD for PW; 15: BFD for VSI PW;
IP hwBfdSessConfNextHop	1.3.6.1.4.1.2011.5.25.38.2.2.1.25	IpAddress	read-create	It is the next hop of the BFD session.
OCT hwBfdSessConfStaticLspName	1.3.6.1.4.1.2011.5.25.38.2.2.1.26	OCTET STRING	read-create	It is the static LSP name of the BFD session.
INT hwBfdSessConfPWSecondaryFlag	1.3.6.1.4.1.2011.5.25.38.2.2.1.27	INTEGER	read-create	The role of the PW bound with BFD session: 1: master PW; 2: secondary PW; 3: no PW
INT hwBfdSessConfTunnelDetectType	1.3.6.1.4.1.2011.5.25.38.2.2.1.28	INTEGER	read-create	Set the failure notifies policy type: 1: Notify applications when detecting both Detect-Down and Neighbor-Down; 2: Notify applications only when detecting Neighbor-Down;
U32 hwBfdSessConfVcId	1.3.6.1.4.1.2011.5.25.38.2.2.1.29	Unsigned32	read-create	It is the ID of VC.
OCT hwBfdSessConfVsiName	1.3.6.1.4.1.2011.5.25.38.2.2.1.30	OCTET STRING	read-create	It is the name of VSI.
IP hwBfdSessConfVsiPeerAddr	1.3.6.1.4.1.2011.5.25.38.2.2.1.31	IpAddress	read-create	It is the peer-ip of VSI.
ENA hwBfdSessConfDiscrAuto	1.3.6.1.4.1.2011.5.25.38.2.2.1.32	EnabledStatus	read-create	Describe whether the discriminator can be auto allocated: disabled: The discriminator can not be allocated automatically; enabled: The discriminator can be allocated automatically.
hwBfdSessionTable	1.3.6.1.4.1.2011.5.25.38.2.3		not-accessible	The BFD Session Table describes the BFD sessions.
hwBfdSessionEntry	1.3.6.1.4.1.2011.5.25.38.2.3.1		not-accessible	The BFD Session Entry describes BFD session.
U32 hwBfdSessIndex	1.3.6.1.4.1.2011.5.25.38.2.3.1.1	Unsigned32	not-accessible	It is unique and the Index of this session.
U32 hwBfdSessMIndex	1.3.6.1.4.1.2011.5.25.38.2.3.1.2	Unsigned32	read-only	This value indicate the configuration has Main Index.
INT hwBfdSessBindVRRP	1.3.6.1.4.1.2011.5.25.38.2.3.1.3	INTEGER	read-only	Describe the capability of bound with VRRP for the BFD session. 0: not bind 1: bind
OCT hwBfdSessCfgName	1.3.6.1.4.1.2011.5.25.38.2.3.1.4	OCTET STRING	read-only	This indicate the name of the session which will be display course information or statistic information of the session.
IP hwBfdSessPeerAddr	1.3.6.1.4.1.2011.5.25.38.2.3.1.5	IpAddress	read-only	Define the peer IP address of the BFD session.
INT hwBfdSessBindIfIndex	1.3.6.1.4.1.2011.5.25.38.2.3.1.6	INTEGER	read-only	It is the index of the binding interface in the BFD session
OCT hwBfdSessBindIfName	1.3.6.1.4.1.2011.5.25.38.2.3.1.7	OCTET STRING	read-only	It is the name of the binding interface in the BFD session.
U32 hwBfdSessLocalDiscr	1.3.6.1.4.1.2011.5.25.38.2.3.1.8	Unsigned32	read-only	A unique, nonzero discriminator value generated by the transmitting system, used to demultiplex multiple BFD sessions between the same pair of system.
U32 hwBfdSessRemoteDiscr	1.3.6.1.4.1.2011.5.25.38.2.3.1.9	Unsigned32	read-only	The discriminator received from the corresponding remote system. This field reflects back the received value of My Discriminator, or is zero if that value is unknown.
I32 hwBfdSessOperMode	1.3.6.1.4.1.2011.5.25.38.2.3.1.10	Integer32	read-only	Describe the current operating mode configured with the BFD session. 0: Asynchronous mode with echo function; 1: Asynchronous mode without echo function; 2: Demand mode with echo function; 3: Demand mode without echo function;
U32 hwBfdSessDetectMult	1.3.6.1.4.1.2011.5.25.38.2.3.1.11	Unsigned32	read-only	Detect time multiplier. The negotiated transmit interval, multiplied by this value, provides the detection time for the transmitting system in Asynchronous mode.
NUM hwBfdSessDemandTimerInterval	1.3.6.1.4.1.2011.5.25.38.2.3.1.12	BfdInterval	read-only	It is the detecting interval in the BFD session with the demand mode. The unit is millisecond.
NUM hwBfdSessActualRxInterval	1.3.6.1.4.1.2011.5.25.38.2.3.1.13	BfdInterval	read-only	This is the minimum interval, in milliseconds, between received BFD Control packets that this system is capable of supporting.
NUM hwBfdSessActualTxInterval	1.3.6.1.4.1.2011.5.25.38.2.3.1.14	BfdInterval	read-only	This is the minimum interval, in milliseconds, that the local system would like to use when transmitting BFD Control packets.
INT hwBfdSessWTRInterval	1.3.6.1.4.1.2011.5.25.38.2.3.1.15	INTEGER	read-only	The WTR interval of the BFD session. The unit is minute.
INT hwBfdSessTOS	1.3.6.1.4.1.2011.5.25.38.2.3.1.16	INTEGER	read-only	This is the TOS value of bfd packet.
I32 hwBfdSessState	1.3.6.1.4.1.2011.5.25.38.2.3.1.17	Integer32	read-only	Describe the current state of the BFD session. 0: Admin Down; 1: Down; 2: Init; 3: Up;
I32 hwBfdSessDiag	1.3.6.1.4.1.2011.5.25.38.2.3.1.18	Integer32	read-only	A diagnostic code specifying the local system's reason for the last session state change. Values are: 0--No Diagnostic 1--Control Detection Time Expired 2--Echo Function Failed 3--Neighbor Signaled Session Down 4--Forwarding Plane Reset 5--Path Down 6--Concatenated Path Down 7--Administratively Down 8--Reverse Concatenated Path Down 9--Neighbor Signaled Session Down (Receive AdminDown) 10-31--Reserved for future use
IP hwBfdSessSourceAddr	1.3.6.1.4.1.2011.5.25.38.2.3.1.19	IpAddress	read-only	The source address of the session.
U32 hwBfdSessVrfIndex	1.3.6.1.4.1.2011.5.25.38.2.3.1.20	Unsigned32	read-only	The index of the VPN interface.
OCT hwBfdSessVPNName	1.3.6.1.4.1.2011.5.25.38.2.3.1.21	OCTET STRING	read-only	The name of VPN interface.
INT hwBfdSessType	1.3.6.1.4.1.2011.5.25.38.2.3.1.22	INTEGER	read-only	The type of the BFD session. 1:static 2:dynamic 3:entire dynamic
INT hwBfdSessBindAppType	1.3.6.1.4.1.2011.5.25.38.2.3.1.23	INTEGER	read-only	The Application type that this BFD session has been bound to 1:No application 2:VRRP 3:IFNET 4:VRRP&IFNET 5:BGP 6:OSPF 7:BGP&OSPF 8:OAM&LSPM&L2VPN (for LDP LSP and static LSP) 9:OAM&LSPM&TUNNEL&L2VPN (for TE_Tunnnel) 10:LSPM&TUNNEL&TUNNEL_PS&L2VPN (for TE_LSP) 11:OAM&MPLSFW&L2VPN (for PW) 12:ISIS 13:VSIPW (for VSI PW) 14:VRRP&OAM&LSPM&L2VPN 15:VRRP&OAM&TUNNEL&L2VPN 16:VRRP&LSPM&TUNNEL&TUNNEL_PS&L2VPN 17:VRRP&OAM&MPLSFW&L2VPN 18:PIM 19:BGP&ISIS 20:BGP&PIM 21:OSPF&ISIS 22:OSPF&PIM 23:ISIS&PIM 24:BGP&OSPF&ISIS 25:BGP&OSPF&PIM 26:BGP&ISIS&PIM 27:OSPF&ISIS&PIM 28:BGPOSPF&ISIS&PIM
INT hwBfdSessDefaultIp	1.3.6.1.4.1.2011.5.25.38.2.3.1.24	INTEGER	read-only	BFD session use default multicast IP as the detect peer-ip 1 : do not use the default multicast IP 2 : use the default multicast IP
INT hwBfdSessPISFlag	1.3.6.1.4.1.2011.5.25.38.2.3.1.25	INTEGER	read-only	The state of BFD session is associated with the state of the binding interface 1 : do not associate with interface state 2 : associate with interface state 3 : associate with interface and correlative sub interface.
INT hwBfdSessBindType	1.3.6.1.4.1.2011.5.25.38.2.3.1.26	INTEGER	read-only	The binding type of the BFD session: 1: BFD for IP with peer-ip and interface; 2: BFD for IP only with peer-ip; 3: BFD for IP with peer-ip and source-ip; 4: BFD for IP with peer-ip, interface and source-ip; 5: BFD for FEC(NOT support now); 6: BFD for Tunnel interface(NOT support now); 7: BFD for OSPF; 8: BFD for ISIS; 9: BFD for LDP-LSP; 10: BFD for static LSP; 11: BFD for TE-LSP; 12: BFD for TE-Tunnel; 13: BFD for PW; 15: BFD for VSI PW;
IP hwBfdSessNextHop	1.3.6.1.4.1.2011.5.25.38.2.3.1.27	IpAddress	read-only	It is the next hop of the BFD session.
OCT hwBfdSessStaticLspName	1.3.6.1.4.1.2011.5.25.38.2.3.1.28	OCTET STRING	read-only	It is the static LSP name of the BFD session.
U32 hwBfdSessLspIndex	1.3.6.1.4.1.2011.5.25.38.2.3.1.29	Unsigned32	read-only	It is the index of the static LSP or LDP LSP in BFD session, mapping the channel index in MPLS network.
INT hwBfdSessPWSecondaryFlag	1.3.6.1.4.1.2011.5.25.38.2.3.1.30	INTEGER	read-only	The role of the PW bound with BFD session: 1: master PW; 2: secondary PW; 3: no PW;
INT hwBfdSessTunnelDetectType	1.3.6.1.4.1.2011.5.25.38.2.3.1.31	INTEGER	read-only	Set the failure notifies policy type: 1: Notify applications when detecting both Detect-Down and Neighbor-Down; 2: Notify applications only when detecting Neighbor-Down;
U32 hwBfdSessVcId	1.3.6.1.4.1.2011.5.25.38.2.3.1.32	Unsigned32	read-only	It is the ID of VC.
OCT hwBfdSessVsiName	1.3.6.1.4.1.2011.5.25.38.2.3.1.33	OCTET STRING	read-only	It is the name of VSI.
IP hwBfdSessVsiPeerAddr	1.3.6.1.4.1.2011.5.25.38.2.3.1.34	IpAddress	read-only	It is the peer-ip of VSI.
ENA hwBfdSessDiscrAuto	1.3.6.1.4.1.2011.5.25.38.2.3.1.35	EnabledStatus	read-only	Describe whether the discriminator can be auto allocated: disabled: The discriminator can not be allocated automatically; enabled: The discriminator can be allocated automatically.
hwBfdSessionPerTable	1.3.6.1.4.1.2011.5.25.38.2.4		not-accessible	This table specifies BFD Session performance counters.
hwBfdSessionPerEntry	1.3.6.1.4.1.2011.5.25.38.2.4.1		not-accessible	An entry in this table is created by a BFD-enabled node for every BFD Session.
U32 hwBfdSessPerIndex	1.3.6.1.4.1.2011.5.25.38.2.4.1.1	Unsigned32	not-accessible	The index of BFD session statistics.
C32 hwBfdSessPerfPktIn	1.3.6.1.4.1.2011.5.25.38.2.4.1.2	Counter32	read-only	The statistical information of the received Octets in local system in this session.The total received packet number.
C32 hwBfdSessPerfPktInHC	1.3.6.1.4.1.2011.5.25.38.2.4.1.3	Counter32	read-only	The statistical information of the received Octets in local system in this session.The high 4 bytes of total received packet number.
C32 hwBfdSessPerfPktOut	1.3.6.1.4.1.2011.5.25.38.2.4.1.4	Counter32	read-only	The statistical information of the send Packets in local system in this session.
C32 hwBfdSessPerfPktOutHC	1.3.6.1.4.1.2011.5.25.38.2.4.1.5	Counter32	read-only	The statistical information of the send Packets in local system in this session.The high 4 bytes of total send packet number
C32 hwBfdSessPerfBadIn	1.3.6.1.4.1.2011.5.25.38.2.4.1.6	Counter32	read-only	The statistical information of the received Errors in local system in this session.
C32 hwBfdSessPerfBadInHC	1.3.6.1.4.1.2011.5.25.38.2.4.1.7	Counter32	read-only	The statistical information of the received Errors in local system in this session.The high 4 bytes of total received wrong packet number.
C32 hwBfdSessPerfBadOut	1.3.6.1.4.1.2011.5.25.38.2.4.1.8	Counter32	read-only	The statistical information of the send Errors in local system in this session.
C32 hwBfdSessPerfBadOutHC	1.3.6.1.4.1.2011.5.25.38.2.4.1.9	Counter32	read-only	The statistical information of the send Errors in local system in this session.The high 4 bytes of total send wrong packet number
OCT hwBfdSessPerfLastSessDownTime	1.3.6.1.4.1.2011.5.25.38.2.4.1.10	OCTET STRING	read-only	The statistical information of the trammitted Octets in local system in this session.
U32 hwBfdSessPerfSessDownCount	1.3.6.1.4.1.2011.5.25.38.2.4.1.11	Unsigned32	read-only	The total count of session down.
U32 hwBfdSessPerfSessShortBreakCount	1.3.6.1.4.1.2011.5.25.38.2.4.1.12	Unsigned32	read-only	The total count of session shortbreak.
OCT hwBfdSessionPerStartTime	1.3.6.1.4.1.2011.5.25.38.2.4.1.13	OCTET STRING	read-only	The time that session start detection.
hwBfdSlotTable	1.3.6.1.4.1.2011.5.25.38.2.5		not-accessible	The Slot table of BFD entries.
hwBfdSlotEntry	1.3.6.1.4.1.2011.5.25.38.2.5.1		not-accessible	BFD statistics on specify board of containing the following objects.
U32 hwBfdSlotID	1.3.6.1.4.1.2011.5.25.38.2.5.1.1	Unsigned32	not-accessible	The ID of Slot.
U32 hwBfdSlotReserveOneHopSessNum	1.3.6.1.4.1.2011.5.25.38.2.5.1.2	Unsigned32	read-create	The number of session reserving for one-hop session on the board.
U32 hwBfdSlotOneHopSessNum	1.3.6.1.4.1.2011.5.25.38.2.5.1.3	Unsigned32	read-only	The number of session for one-hop session on the board.
U32 hwBfdSlotCurrentSessNum	1.3.6.1.4.1.2011.5.25.38.2.5.1.4	Unsigned32	read-only	The number of session on the board on current.
ROW hwBfdSlotRowStatus	1.3.6.1.4.1.2011.5.25.38.2.5.1.5	RowStatus	read-create	Used to manage the creation and deletion of conceptual rows.
hwBfdTtlConfTable	1.3.6.1.4.1.2011.5.25.38.2.6		not-accessible	The TTL configuration table.
hwBfdTtlConfEntry	1.3.6.1.4.1.2011.5.25.38.2.6.1		not-accessible	The TTL configuration entry.
IP hwBfdTtlConfAddr	1.3.6.1.4.1.2011.5.25.38.2.6.1.1	IpAddress	not-accessible	IP address.
I32 hwBfdTtlConfMaskLen	1.3.6.1.4.1.2011.5.25.38.2.6.1.2	Integer32	not-accessible	Length of IP address mask.
INT hwBfdTtlConfType	1.3.6.1.4.1.2011.5.25.38.2.6.1.3	INTEGER	not-accessible	Type of BFD session.
I32 hwBfdTtlConfValue	1.3.6.1.4.1.2011.5.25.38.2.6.1.4	Integer32	read-create	TTL value.
ROW hwBfdTtlConfRowStatus	1.3.6.1.4.1.2011.5.25.38.2.6.1.50	RowStatus	read-create	The status of this table entry.
hwBfdNotifications	1.3.6.1.4.1.2011.5.25.38.3
NTF hwBfdSessDown	1.3.6.1.4.1.2011.5.25.38.3.1			This trap occurred when the state of the BFD session became down. The BFD session is characterized by the objects in this node.
NTF hwBfdSessUp	1.3.6.1.4.1.2011.5.25.38.3.2			This trap occurred when the state of the BFD session became up. The BFD session is characterized by the objects in this node.
NTF hwBfdSessReachLimit	1.3.6.1.4.1.2011.5.25.38.3.3			There is the notify when the session number reach the global limit.
NTF hwBfdSessReachLimitBindIf	1.3.6.1.4.1.2011.5.25.38.3.4			There is the notify when the session number reach the interface limit.
hwBfdConformance	1.3.6.1.4.1.2011.5.25.38.4
hwBfdCompliances	1.3.6.1.4.1.2011.5.25.38.4.1
hwBfdFullCompliance	1.3.6.1.4.1.2011.5.25.38.4.1.1			Description.
hwBfdGroups	1.3.6.1.4.1.2011.5.25.38.4.2
hwBfdGroup	1.3.6.1.4.1.2011.5.25.38.4.2.1			Description.
hwBfdSessGroup	1.3.6.1.4.1.2011.5.25.38.4.2.2			Description.
hwBfdObsoleteGroup	1.3.6.1.4.1.2011.5.25.38.4.2.3			Description.
hwBfdNotificationGroup	1.3.6.1.4.1.2011.5.25.38.4.2.4			Description.

RFC description

Huawei Bidirectional Forwarding Detection (BFD) protocol session and instance management MIB; vendor-private.

Start monitoring Huawei router or switch (Bidirectional Forwarding Detection) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-BFD-MIB

What Is HUAWEI-BFD-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description