All MIBs › Juniper-ISIS-MIB › juniIsisSysReferenceBandwidth
juniIsisSysReferenceBandwidth
Module: Juniper-ISIS-MIB
OID (symbolic): Juniper-ISIS-MIB::juniIsisSysReferenceBandwidth
OID (numeric): 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.44
Node type: OBJECT-TYPE
Type: Gauge32
Access: read-write
Description: Configure the reference bandwitdth used to calculate the link cost in bits per second.If the reference bandwidth is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295) and juniIsisSysHighReferenceBandwidth must be used to report the reference bandwidth.
What is juniIsisSysReferenceBandwidth?
Read-write Gauge32 setting the reference bandwidth (in bits per second) IS-IS uses to compute default link costs; if the true reference bandwidth exceeds the 4,294,967,295 max this field can hold, juniIsisSysHighReferenceBandwidth must be used instead. Admins raise this on networks with very high-speed links so cost differences between, say, 10G and 100G interfaces remain meaningful.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.44 snmpwalk -v2c -c public <target> Juniper-ISIS-MIB::juniIsisSysReferenceBandwidth
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.44.1 snmpget -v2c -c public <target> Juniper-ISIS-MIB::juniIsisSysReferenceBandwidth.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.44.1 i <value>
Start monitoring Juniper E-series router (IS-IS routing protocol) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-ISIS-MIB::juniIsisSysReferenceBandwidth OID value, configure state conditions and alerts, and monitor any Juniper E-series router (IS-IS routing protocol) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.38 | juniIsisMIB | Juniper-ISIS-MIB |
| 1.3.6.1.4.1.4874.2.2.38.1 | juniIsisObjects | Juniper-ISIS-MIB |
| 1.3.6.1.4.1.4874.2.2.38.1.1 | juniIsisSystemGroup | Juniper-ISIS-MIB |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1 | juniIsisSysTable | Juniper-ISIS-MIB |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1 | juniIsisSysEntry | Juniper-ISIS-MIB |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.44 | juniIsisSysReferenceBandwidth | Juniper-ISIS-MIB |