All MIBs › ISIS-MIB
Organization: IETF IS-IS for IP Internets Working Group
Last Updated: 2006-04-04
Category: IP and Core Protocols, Routing Protocols
Description: Defines managed objects for the Intermediate System to Intermediate System (IS-IS) routing protocol as defined in ISO 10589, when used for constructing IP routing tables.
IPNetwork Monitor uses several OIDs from this MIB in network discovery and polling the applicable devices. Start monitoring ISIS-MIB with a free 30-day trial of IPNetwork Monitor.
What Is ISIS-MIB?
ISIS-MIB is an IETF-standard MIB module defining managed objects for the IS-IS (Intermediate System to Intermediate System) routing protocol as specified in ISO 10589, adapted here for building IP routing tables per RFC 1195. It exposes routing-protocol data categories: system-level IS-IS configuration and level parameters, adjacency and area information, link-state database contents, and protocol notifications/traps for events like adjacency changes. Its monitoring role is focused on protocol/software operational status rather than physical hardware - administrators use it to confirm IS-IS is running with the expected level configuration, that neighbor adjacencies are up, and to be alerted via traps when adjacencies or areas change state, which reveals routing instability or misconfiguration. As a routing-protocol MIB it depends on and complements standard MIB-II interface objects to correlate IS-IS state with the underlying network interfaces. An ISIS-MIB OID under the isisSystem or isisObjects subtree is what an NMS would poll to build a live view of adjacency and topology health. It is deployed on any vendor-neutral router or Layer 3 switch running IS-IS, common in large service-provider and enterprise core networks.
IPNetwork Monitor allows you to monitor SNMP objects defined in ISIS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- vendor-neutral, standards-based MIB (ISO 10589/RFC 1195), applicable to any router or Layer 3 switch running IS-IS
Monitoring Examples
An operator would poll isisSysLevel-related objects to confirm a router's configured IS-IS level (Level 1, Level 2, or both) matches design intent, and watch for isisNotifications traps such as adjacency state changes to catch a neighbor going down. Objects under isisSystem give the baseline protocol configuration state, while the isisObjects subtree groups the adjacency, area, and link-state data an NMS would poll to build a live view of IS-IS topology health.
What Can Be Monitored
- IS-IS system level configuration
- adjacency status
- area/link-state database state
- adjacency change notifications
This MIB depends on
Related MIBs
Imported Objects
From DIFFSERV-MIB
| IndexInteger | |
| IndexIntegerNextFree |
From IF-MIB
| InterfaceIndex |
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressPrefixLength | |
| InetAddressType |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 | |
| mib-2 |
From SNMPv2-TC
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TimeStamp | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| NTF isisAdjacencyChange | 1.3.6.1.2.1.138.0.17 | A notification sent when an adjacency changes state, entering or leaving state up. The first 6 bytes of the isisPduLspId are the SystemID of the adjacent IS. The isisAdjState is the new state of the adjacency. | ||
| INT isisAdjState | 1.3.6.1.2.1.138.1.10.1.12 | INTEGER | accessible-for-notify | The current state of an adjacency. |
| isisAdvancedCompliance | 1.3.6.1.2.1.138.2.1.2 | The compliance statement for agents that fully support the IS-IS MIB. There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there are compliance requirements. Those requirements and similar requirements for related objects are expressed below, in pseudo-OBJECT clause form, in this description: -- OBJECT isisSummAddressType -- SYNTAX InetAddressType { ipv4(1), ipv6(2) } -- -- DESCRIPTION -- The MIB requires support for IPv4 Summary -- Addresses and anticipates the support of -- IPv6 addresses. -- -- -- OBJECT isisRedistributeAddrType -- SYNTAX InetAddressType { ipv4(1), ipv6(2) } -- -- DESCRIPTION -- The MIB requires support for IPv4 -- Redistribution Addresses and anticipates -- the support of IPv6 addresses. | ||
| ADR isisAreaAddr | 1.3.6.1.2.1.138.1.1.3.1.1 | IsisOSINSAddress | read-only | An area address reported in a Level 1 LSP. |
| isisAreaAddrEntry | 1.3.6.1.2.1.138.1.1.3.1 | not-accessible | Each entry contains one area address reported in a Level 1 LSP generated or received by this Intermediate System. Dynamically learned rows do not survive an agent reboot. | |
| isisAreaAddrTable | 1.3.6.1.2.1.138.1.1.3 | not-accessible | The union of the sets of area addresses reported in all Level 1 LSPs with fragment number zero generated by this Intermediate System, or received from other Intermediate Systems that are reachable via Level 1 routing. | |
| NTF isisAreaMismatch | 1.3.6.1.2.1.138.0.12 | A notification sent when we receive a Hello PDU from an IS that does not share any area address. This notification includes the header of the packet, which may help a network manager identify the source of the confusion. The agent must throttle the generation of consecutive isisAreaMismatch notifications so that there is at least a 5-second gap between notifications of this type. When notifications are throttled, they are dropped, not queued for sending at a future time. | ||
| NTF isisAttemptToExceedMaxSequence | 1.3.6.1.2.1.138.0.4 | When the sequence number on an LSP we generate wraps the 32-bit sequence counter, we purge and wait to re-announce this information. This notification describes that event. Since these should not be generated rapidly, we generate an event each time this happens. While the first 6 bytes of the LSPID are ours, the other two contain useful information. | ||
| NTF isisAuthenticationFailure | 1.3.6.1.2.1.138.0.10 | A notification sent when we receive a PDU with an incorrect authentication information field. This notification includes the header of the packet, which may help a network manager identify the source of the confusion. The agent must throttle the generation of consecutive isisAuthenticationFailure notifications so that there is at least a 5-second gap between notifications of this type. When notifications are throttled, they are dropped, not queued for sending at a future time. | ||
| NTF isisAuthenticationTypeFailure | 1.3.6.1.2.1.138.0.9 | A notification sent when we receive a PDU with the wrong authentication type field. This notification includes the header of the packet, which may help a network manager identify the source of the confusion. The agent must throttle the generation of consecutive isisAuthenticationTypeFailure notifications so that there is at least a 5-second gap between notifications of this type. When notifications are throttled, they are dropped, not queued for sending at a future time. | ||
| isisCirc | 1.3.6.1.2.1.138.1.3 | |||
| T/F isisCirc3WayEnabled | 1.3.6.1.2.1.138.1.3.2.1.13 | TruthValue | read-create | Is this circuit enabled to run 3Way handshake? |
| C32 isisCircAdjChanges | 1.3.6.1.2.1.138.1.5.2.1.2 | Counter32 | read-only | The number of times an adjacency state change has occurred on this circuit. |
| ISI isisCircAdminState | 1.3.6.1.2.1.138.1.3.2.1.3 | IsisAdminState | read-create | The administrative state of the circuit. |
| C32 isisCircAuthFails | 1.3.6.1.2.1.138.1.5.2.1.9 | Counter32 | read-only | The number of times an IS-IS control PDU with the correct auth type has failed to pass authentication validation. |
| C32 isisCircAuthTypeFails | 1.3.6.1.2.1.138.1.5.2.1.8 | Counter32 | read-only | The number of times an IS-IS control PDU with an auth type field different from that for this system has been received. |
| isisCircEntry | 1.3.6.1.2.1.138.1.3.2.1 | not-accessible | An isisCircEntry exists for each circuit configured for Integrated IS-IS on this system. Dynamically created rows MUST survive an agent reboot. | |
| ROW isisCircExistState | 1.3.6.1.2.1.138.1.3.2.1.4 | RowStatus | read-create | The existence state of this circuit. Setting the state to 'notInService' halts the generation and processing of IS-IS protocol PDUs on this circuit. Setting the state to destroy will also erase any configuration associated with the circuit. Support for 'createAndWait' and 'notInService' is not required. A row entry cannot be modified when the value of this object is 'active'. |
| T/F isisCircExtDomain | 1.3.6.1.2.1.138.1.3.2.1.6 | TruthValue | read-create | If true, suppress normal transmission of and interpretation of Intra-domain IS-IS PDUs on this circuit. |
| U32 isisCircExtendedCircID | 1.3.6.1.2.1.138.1.3.2.1.14 | Unsigned32 | read-create | The value to be used as the extended circuit ID in 3Way handshake. This value is only used if isisCirc3WayEnabled is true, and it must be unique across all circuits on this IS. |
| C32 isisCircIDFieldLenMismatches | 1.3.6.1.2.1.138.1.5.2.1.6 | Counter32 | read-only | The number of times an IS-IS control PDU with an ID field length different from that for this system has been received. |
| NUM isisCircIfIndex | 1.3.6.1.2.1.138.1.3.2.1.2 | InterfaceIndex | read-create | The value of ifIndex for the interface to which this circuit corresponds. This object cannot be modified after creation. |
| NUM isisCircIndex | 1.3.6.1.2.1.138.1.3.2.1.1 | IndexInteger | not-accessible | An index used to uniquely identify this circuit. When creating a row in this table, the isisNextCircIndex object should be retrieved, and its value should be specified as the value of this index using a SET operation. A retrieved value of zero(0) indicates that no rows can be created at this time. |
| C32 isisCircInitFails | 1.3.6.1.2.1.138.1.5.2.1.4 | Counter32 | read-only | The number of times initialization of this circuit has failed. This counts events such as PPP NCP failures. Failures to form an adjacency are counted by isisCircRejAdjs. |
| C32 isisCircLANDesISChanges | 1.3.6.1.2.1.138.1.5.2.1.10 | Counter32 | read-only | The number of times the Designated IS has changed on this circuit at this level. If the circuit is point to point, this count is zero. |
| TIM isisCircLastUpTime | 1.3.6.1.2.1.138.1.3.2.1.12 | TimeStamp | read-only | How long the circuit has been enabled, measured in hundredths of seconds since the last re-initialization of the network management subsystem; 0 if the circuit has never been 'on'. |
| U32 isisCircLevelCSNPInterval | 1.3.6.1.2.1.138.1.4.1.1.13 | Unsigned32 | read-write | Interval of time, in seconds, between periodic transmission of a complete set of CSNPs on multiaccess networks if this router is the designated router at this level. This object follows the ResettingTimer behavior. |
| ISI isisCircLevelDesIS | 1.3.6.1.2.1.138.1.4.1.1.7 | IsisCircuitID | read-only | The ID of the LAN-Designated Intermediate System on this circuit at this level. If, for any reason, this system is not partaking in the relevant Designated Intermediate System election process, then the value returned is the zero-length OCTET STRING. |
| U32 isisCircLevelDRHelloTimer | 1.3.6.1.2.1.138.1.4.1.1.10 | Unsigned32 | read-write | Period, in milliseconds, between Hello PDUs on multiaccess networks when this IS is the Designated Intermediate System. This object follows the ResettingTimer behavior. |
| isisCircLevelEntry | 1.3.6.1.2.1.138.1.4.1.1 | not-accessible | An isisCircLevelEntry exists for each level on each circuit configured for Integrated IS-IS on this system. Configured values MUST survive an agent reboot. | |
| U32 isisCircLevelHelloMultiplier | 1.3.6.1.2.1.138.1.4.1.1.8 | Unsigned32 | read-write | This value is multiplied by the corresponding HelloTimer, and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used by receivers of hello packets from this IS. |
| U32 isisCircLevelHelloTimer | 1.3.6.1.2.1.138.1.4.1.1.9 | Unsigned32 | read-write | Maximum period, in milliseconds, between IIH PDUs on multiaccess networks at this level for LANs. The value at L1 is used as the period between Hellos on L1L2 point-to-point circuits. Setting this value at level 2 on an L1L2 point-to-point circuit will result in an error of InconsistentValue. This object follows the ResettingTimer behavior. |
| ISI isisCircLevelID | 1.3.6.1.2.1.138.1.4.1.1.6 | IsisCircuitID | read-only | On a point-to-point circuit with a fully initialized adjacency to a peer IS, the value of this object is the circuit ID negotiated during adjacency initialization. On a point to point circuit without such an adjacency, the value is the concatenation of the local system ID and the one-byte isisCircLevelIDOctet for this circuit, i.e., the value that would be proposed for the circuit ID. On other circuit types, the value returned is the zero- length OCTET STRING. |
| U32 isisCircLevelIDOctet | 1.3.6.1.2.1.138.1.4.1.1.5 | Unsigned32 | read-only | A one-byte identifier for the circuit selected by the Intermediate System. On point-to-point circuits, the value is used as the Local Circuit ID in point-to-point IIH PDUs transmitted on this circuit. In this case, values of isisCircLevelIDOctet do not need to be unique. For broadcast circuits, the value is used to generate the LAN ID that will be used if this Intermediate System is elected as the Designated IS on this circuit. The value is required to differ on LANs where the Intermediate System is the Designated Intermediate System. |
| ISI isisCircLevelIndex | 1.3.6.1.2.1.138.1.4.1.1.1 | IsisISLevel | not-accessible | The level that this entry describes. |
| ISI isisCircLevelISPriority | 1.3.6.1.2.1.138.1.4.1.1.4 | IsisISPriority | read-write | The priority for becoming the LAN-Designated Intermediate System at this level. |
| ISI isisCircLevelLSPThrottle | 1.3.6.1.2.1.138.1.4.1.1.11 | IsisUnsigned16TC | read-write | Minimal interval of time, in milliseconds, between transmissions of LSPs on an interface at this level. |
| ISI isisCircLevelMetric | 1.3.6.1.2.1.138.1.4.1.1.2 | IsisDefaultMetric | read-write | The metric value of this circuit for this level. |
| U32 isisCircLevelMinLSPRetransInt | 1.3.6.1.2.1.138.1.4.1.1.12 | Unsigned32 | read-write | Minimum interval, in seconds, between re-transmission of an LSP at this level. This object follows the ResettingTimer behavior. Note that isisCircLevelLSPThrottle controls how fast we send back-to-back LSPs. This variable controls how fast we re-send the same LSP. |
| U32 isisCircLevelPartSNPInterval | 1.3.6.1.2.1.138.1.4.1.1.14 | Unsigned32 | read-write | Minimum interval, in seconds, between sending Partial Sequence Number PDUs at this level. This object follows the ResettingTimer behavior. |
| isisCircLevelTable | 1.3.6.1.2.1.138.1.4.1 | not-accessible | Level specific information about circuits used by IS-IS. | |
| ISI isisCircLevelType | 1.3.6.1.2.1.138.1.3.2.1.7 | IsisLevel | read-create | Indicates which type of packets will be sent and accepted on this circuit. The values set will be saved, but the values used will be modified by the settings of isisSysLevelType. Thus, if the isisSysTpe is level2 and the isisCircLevelType for a circuit is level1, the circuit will not send or receive IS-IS packets. This object follows the ReplaceOnlyWhileDisabled behavior. |
| isisCircLevelValues | 1.3.6.1.2.1.138.1.4 | |||
| ISI isisCircLevelWideMetric | 1.3.6.1.2.1.138.1.4.1.1.3 | IsisWideMetric | read-write | The wide metric value of this circuit for this level. |
| C32 isisCircMaxAreaAddrMismatches | 1.3.6.1.2.1.138.1.5.2.1.7 | Counter32 | read-only | The number of times an IS-IS control PDU with a max area address field different from that for this system has been received. |
| U32 isisCircMeshGroup | 1.3.6.1.2.1.138.1.3.2.1.10 | Unsigned32 | read-create | Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flooded to another circuit in the same mesh group. If isisCircMeshGroupEnabled is inactive or blocked, this value is ignored. |
| INT isisCircMeshGroupEnabled | 1.3.6.1.2.1.138.1.3.2.1.9 | INTEGER | read-create | Is this port a member of a mesh group, or is it blocked? Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flooded to another circuit in the same mesh group. |
| U32 isisCircNumAdj | 1.3.6.1.2.1.138.1.5.2.1.3 | Unsigned32 | read-only | The number of adjacencies on this circuit. |
| T/F isisCircPassiveCircuit | 1.3.6.1.2.1.138.1.3.2.1.8 | TruthValue | read-create | Should we include this interface in LSPs, even if it is not running the IS-IS Protocol? |
| C32 isisCircRejAdjs | 1.3.6.1.2.1.138.1.5.2.1.5 | Counter32 | read-only | The number of times an adjacency has been rejected on this circuit. |
| T/F isisCircSmallHellos | 1.3.6.1.2.1.138.1.3.2.1.11 | TruthValue | read-create | Can we send unpadded hellos on LAN circuits? False means the LAN Hellos must be padded. Implementations should allow the administrator to read this value. An implementation need not be able to support unpadded hellos to be conformant. |
| isisCircTable | 1.3.6.1.2.1.138.1.3.2 | not-accessible | The table of circuits used by this Intermediate System. | |
| INT isisCircType | 1.3.6.1.2.1.138.1.3.2.1.5 | INTEGER | read-create | The type of the circuit. This object follows the ReplaceOnlyWhileDisabled behavior. The type specified must be compatible with the type of the interface defined by the value of isisCircIfIndex. |
| isisCircuitCounterEntry | 1.3.6.1.2.1.138.1.5.2.1 | not-accessible | An isisCircuitCounterEntry exists for each circuit used by Integrated IS-IS on this system. | |
| isisCircuitCounterTable | 1.3.6.1.2.1.138.1.5.2 | not-accessible | Circuit specific counters for this Intermediate System. | |
| isisCircuitGroup | 1.3.6.1.2.1.138.2.2.2 | The collections of objects used to describe an IS-IS Circuit. | ||
| INT isisCircuitType | 1.3.6.1.2.1.138.1.5.2.1.1 | INTEGER | not-accessible | What type of circuit saw these counts? The point-to-point Hello PDU includes both L1 and L2, and ISs form a single adjacency on point-to-point links. Thus, we combine counts on point-to-point links into one group. |
| isisCompliance | 1.3.6.1.2.1.138.2.1.1 | The compliance statement for agents that support the IS-IS MIB. There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there are compliance requirements. Those requirements and similar requirements for related objects are expressed below, in pseudo-OBJECT clause form, in this description: -- OBJECT isisSummAddressType -- SYNTAX InetAddressType { ipv4(1), ipv6(2) } -- -- DESCRIPTION -- The MIB requires support for IPv4 Summary -- Addresses and anticipates the support of -- IPv6 addresses. -- -- -- OBJECT isisRedistributeAddrType -- SYNTAX InetAddressType { ipv4(1), ipv6(2) } -- -- DESCRIPTION -- The MIB requires support for IPv4 -- Redistribution Addresses and anticipates -- the support of IPv6 addresses. | ||
| isisCompliances | 1.3.6.1.2.1.138.2.1 | |||
| isisConformance | 1.3.6.1.2.1.138.2 | |||
| NTF isisCorruptedLSPDetected | 1.3.6.1.2.1.138.0.3 | This notification is generated when we find that an LSP that was stored in memory has become corrupted. The number of times this has been generated is counted by isisSysCorrLSPs. We forward an LSP ID. We may have independent knowledge of the ID, but in some implementations there is a chance that the ID itself will be corrupted. | ||
| isisCounters | 1.3.6.1.2.1.138.1.5 | |||
| NTF isisDatabaseOverload | 1.3.6.1.2.1.138.0.1 | This notification is generated when the system enters or leaves the Overload state. The number of times this has been generated and cleared is kept track of by isisSysStatLSPDbaseOloads. | ||
| U32 isisErrorOffset | 1.3.6.1.2.1.138.1.10.1.13 | Unsigned32 | accessible-for-notify | An offset to a problem in a PDU. If the problem is a malformed TLV, this points to the beginning of the TLV. If the problem is in the header, this points to the byte that is suspicious. |
| U32 isisErrorTLVType | 1.3.6.1.2.1.138.1.10.1.14 | Unsigned32 | accessible-for-notify | The type for a malformed TLV. |
| isisGroups | 1.3.6.1.2.1.138.2.2 | |||
| NTF isisIDLenMismatch | 1.3.6.1.2.1.138.0.5 | A notification sent when we receive a PDU with a different value for the System ID Length. This notification includes an index to identify the circuit where we saw the PDU and the header of the PDU, which may help a network manager identify the source of the confusion. The agent must throttle the generation of consecutive isisIDLenMismatch notifications so that there is at least a 5-second gap between notifications of this type. When notifications are throttled, they are dropped, not queued for sending at a future time. | ||
| ISI isisIPRAAdminState | 1.3.6.1.2.1.138.1.8.1.1.9 | IsisAdminState | read-create | The administrative state of the IP Reachable Address. This object follows the IsisAdminState and ManualOrAutomatic behaviors. |
| IP isisIPRADest | 1.3.6.1.2.1.138.1.8.1.1.2 | InetAddress | not-accessible | The destination of this IP Reachable Address. This is a network address, subnetwork address, or host address. The type of this address is determined by the value of the isisIPRADestType object. |
| ADR isisIPRADestPrefixLen | 1.3.6.1.2.1.138.1.8.1.1.3 | InetAddressPrefixLength | not-accessible | The length of the IP Netmask for Reachability Address. The values for the index objects isisIPRADest and isisIPRADestPrefixLen must be consistent. When the value of isisIPRADest (excluding the zone index, if one is present) is x, then the bitwise logical-AND of x with the value of the mask formed from the corresponding index object isisIPRADestPrefixLen MUST be equal to x. If not, then the index pair is not consistent, and an inconsistentName error must be returned on SET or CREATE requests. |
| IPt isisIPRADestType | 1.3.6.1.2.1.138.1.8.1.1.1 | InetAddressType | not-accessible | The type of this IP Reachable Address. |
| isisIPRAEntry | 1.3.6.1.2.1.138.1.8.1.1 | not-accessible | Each entry defines an IP Reachable Address to a network, subnetwork, or host. Each IP Reachable Address may have multiple entries in the table, one for each equal cost path to the reachable address. Dynamically created rows MUST survive an agent reboot. Implementers need to be aware that if the total number of elements (octets or sub-identifiers) in isisIPRADestr, isisIPRADestPrefixLen, and isisIPRANextHopIndex is too great, then OIDs of column instances in this table will have more than 128 subidentifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3. | |
| ROW isisIPRAExistState | 1.3.6.1.2.1.138.1.8.1.1.8 | RowStatus | read-create | The state of this IP Reachable Address. This object follows the ExistenceState and ManualOrAutomatic behaviors. Support for 'createAndWait' and 'notInService' is not required. A row entry cannot be modified when the value of this object is 'active'. |
| ISI isisIPRAFullMetric | 1.3.6.1.2.1.138.1.8.1.1.12 | IsisFullMetric | read-create | The wide metric value for reaching the specified destination over this circuit. This object follows the ManualOrAutomatic behavior. |
| ISI isisIPRAMetric | 1.3.6.1.2.1.138.1.8.1.1.10 | IsisDefaultMetric | read-create | The metric value for reaching the specified destination over this circuit. This object follows the ManualOrAutomatic behavior. |
| ISI isisIPRAMetricType | 1.3.6.1.2.1.138.1.8.1.1.11 | IsisMetricType | read-create | Indicates whether the metric is internal or external. This object follows the ManualOrAutomatic behavior. |
| IP isisIPRANextHop | 1.3.6.1.2.1.138.1.8.1.1.6 | InetAddress | read-create | The IP next hop to this destination. The type of this address is determined by the value of the isisIPRANextHopType object. |
| U32 isisIPRANextHopIndex | 1.3.6.1.2.1.138.1.8.1.1.4 | Unsigned32 | not-accessible | Index of next hop. Used when there are multiple Equal Cost Multipath alternatives for the same destination. |
| IPt isisIPRANextHopType | 1.3.6.1.2.1.138.1.8.1.1.5 | InetAddressType | read-create | The type of the IP next hop address. |
| ADR isisIPRASNPAAddress | 1.3.6.1.2.1.138.1.8.1.1.13 | IsisOSINSAddress | read-create | The SNPA Address to which a PDU may be forwarded in order to reach a destination that matches this IP Reachable Address. This object follows the ManualOrAutomatic behavior. |
| INT isisIPRASourceType | 1.3.6.1.2.1.138.1.8.1.1.14 | INTEGER | read-only | The origin of this route. |
| isisIPRATable | 1.3.6.1.2.1.138.1.8.1 | not-accessible | The table of IP Reachable Addresses to networks, subnetworks, or hosts either manually configured or learned from another protocol. | |
| INT isisIPRAType | 1.3.6.1.2.1.138.1.8.1.1.7 | INTEGER | read-create | The type of this IP Reachable Address. Those of type manual are created by the network manager. Those of type automatic are created through propagation of routing information from another routing protocol. This object follows the ManualOrAutomatic behavior. |
| isisIPReachAddr | 1.3.6.1.2.1.138.1.8 | |||
| isisISAdj | 1.3.6.1.2.1.138.1.6 | |||
| INT isisISAdj3WayState | 1.3.6.1.2.1.138.1.6.1.1.3 | INTEGER | read-only | The 3Way state of the adjacency. These are picked to match the historical on-the-wire representation of the 3Way state and are not intended to match isisISAdjState. |
| isisISAdjAreaAddrEntry | 1.3.6.1.2.1.138.1.6.2.1 | not-accessible | Each entry contains one Area Address reported by a neighboring Intermediate System in its IIH PDUs. Dynamically learned rows do not survive an agent reboot. | |
| ADR isisISAdjAreaAddress | 1.3.6.1.2.1.138.1.6.2.1.2 | IsisOSINSAddress | read-only | One Area Address as reported in IIH PDUs received from the neighbor. |
| U32 isisISAdjAreaAddrIndex | 1.3.6.1.2.1.138.1.6.2.1.1 | Unsigned32 | not-accessible | An index for the areas associated with one neighbor. This provides a simple way to walk the table. |
| isisISAdjAreaAddrTable | 1.3.6.1.2.1.138.1.6.2 | not-accessible | This table contains the set of Area Addresses of neighboring Intermediate Systems as reported in received IIH PDUs. | |
| isisISAdjEntry | 1.3.6.1.2.1.138.1.6.1.1 | not-accessible | Each entry corresponds to one adjacency to an Intermediate System on this system. Dynamically learned rows do not survive an agent reboot. | |
| isisISAdjGroup | 1.3.6.1.2.1.138.2.2.3 | The collections of objects used to manage an IS-IS Adjacency. | ||
| ISI isisISAdjHoldTimer | 1.3.6.1.2.1.138.1.6.1.1.9 | IsisUnsigned16TC | read-only | The holding time, in seconds, for this adjacency. This value is based on received IIH PDUs and the elapsed time since receipt. |
| U32 isisISAdjIndex | 1.3.6.1.2.1.138.1.6.1.1.1 | Unsigned32 | not-accessible | A unique value identifying the IS adjacency from all other such adjacencies on this circuit. This value is automatically assigned by the system when the adjacency is created. |
| IP isisISAdjIPAddrAddress | 1.3.6.1.2.1.138.1.6.3.1.3 | InetAddress | read-only | One IP Address as reported in IIH PDUs received from the neighbor. The type of this address is determined by the value of the isisISAdjIPAddrType object. |
| isisISAdjIPAddrEntry | 1.3.6.1.2.1.138.1.6.3.1 | not-accessible | Each entry contains one IP Address reported by a neighboring Intermediate System in its IIH PDUs. Dynamically learned rows do not survive an agent reboot. | |
| U32 isisISAdjIPAddrIndex | 1.3.6.1.2.1.138.1.6.3.1.1 | Unsigned32 | not-accessible | An index to this table that identifies the IP addresses to which this entry belongs. |
| isisISAdjIPAddrTable | 1.3.6.1.2.1.138.1.6.3 | not-accessible | This table contains the set of IP Addresses of neighboring Intermediate Systems as reported in received IIH PDUs. | |
| IPt isisISAdjIPAddrType | 1.3.6.1.2.1.138.1.6.3.1.2 | InetAddressType | read-only | The type of one IP Address as reported in IIH PDUs received from the neighbor. |
| TIM isisISAdjLastUpTime | 1.3.6.1.2.1.138.1.6.1.1.11 | TimeStamp | read-only | When the adjacency most recently entered the state 'up', measured in hundredths of a second since the last re-initialization of the network management subsystem. Holds 0 if the adjacency has never been in state 'up'. |
| U32 isisISAdjNbrExtendedCircID | 1.3.6.1.2.1.138.1.6.1.1.7 | Unsigned32 | read-only | The 4-byte Extended Circuit ID learned from the Neighbor during 3-way handshake, or 0. |
| ISI isisISAdjNeighPriority | 1.3.6.1.2.1.138.1.6.1.1.10 | IsisISPriority | read-only | Priority of the neighboring Intermediate System for becoming the Designated Intermediate System. |
| ADR isisISAdjNeighSNPAAddress | 1.3.6.1.2.1.138.1.6.1.1.4 | IsisOSINSAddress | read-only | The SNPA address of the neighboring system. |
| ISI isisISAdjNeighSysID | 1.3.6.1.2.1.138.1.6.1.1.6 | IsisSystemID | read-only | The system ID of the neighboring Intermediate System. |
| INT isisISAdjNeighSysType | 1.3.6.1.2.1.138.1.6.1.1.5 | INTEGER | read-only | The type of the neighboring system. |
| isisISAdjProtSuppEntry | 1.3.6.1.2.1.138.1.6.4.1 | not-accessible | Each entry contains one protocol supported by a neighboring Intermediate System as reported in its IIH PDUs. Dynamically learned rows do not survive an agent reboot. | |
| ISI isisISAdjProtSuppProtocol | 1.3.6.1.2.1.138.1.6.4.1.1 | IsisSupportedProtocol | read-only | One supported protocol as reported in IIH PDUs received from the neighbor. |
| isisISAdjProtSuppTable | 1.3.6.1.2.1.138.1.6.4 | not-accessible | This table contains the set of protocols supported by neighboring Intermediate Systems as reported in received IIH PDUs. | |
| INT isisISAdjState | 1.3.6.1.2.1.138.1.6.1.1.2 | INTEGER | read-only | The state of the adjacency. |
| isisISAdjTable | 1.3.6.1.2.1.138.1.6.1 | not-accessible | The table of adjacencies to Intermediate Systems. | |
| ISI isisISAdjUsage | 1.3.6.1.2.1.138.1.6.1.1.8 | IsisLevel | read-only | How is the adjacency used? On a point-to-point link, this might be level1and2, but on a LAN, the usage will be level1 on the adjacency between peers at L1, and level2 for the adjacency between peers at L2. |
| isisISIPRADestGroup | 1.3.6.1.2.1.138.2.2.8 | The collections of objects used to manage configured IP addresses. | ||
| isisISPDUCounterGroup | 1.3.6.1.2.1.138.2.2.6 | The collections of objects used to count protocol PDUs. | ||
| ISI isisLSPAttributes | 1.3.6.1.2.1.138.1.9.1.1.8 | IsisUnsigned8TC | read-only | Flags carried by the LSP. |
| ISI isisLSPChecksum | 1.3.6.1.2.1.138.1.9.1.1.5 | IsisUnsigned16TC | read-only | The 16-bit Fletcher Checksum for this LSP. |
| isisLSPDataBase | 1.3.6.1.2.1.138.1.9 | |||
| NTF isisLSPErrorDetected | 1.3.6.1.2.1.138.0.18 | This notification is generated when we receive an LSP with a parse error. The isisCircIfIndex holds an index of the circuit on which the PDU arrived. The isisPduFragment holds the start of the LSP, and the isisErrorOffset points to the problem. If the problem is a malformed TLV, isisErrorOffset points to the start of the TLV, and isisErrorTLVType holds the value of the type. If the problem is with the LSP header, isisErrorOffset points to the suspicious byte. The number of such LSPs is accumulated in isisSysStatLSPErrors. | ||
| isisLSPGroup | 1.3.6.1.2.1.138.2.2.9 | The collections of objects used to observe the LSP Database. | ||
| ISI isisLSPID | 1.3.6.1.2.1.138.1.9.1.1.2 | IsisLinkStatePDUID | not-accessible | The 8-byte LSP ID for this Link State PDU. |
| ISI isisLSPLevel | 1.3.6.1.2.1.138.1.9.1.1.1 | IsisISLevel | not-accessible | At which level does this LSP appear? |
| ISI isisLSPLifetimeRemain | 1.3.6.1.2.1.138.1.9.1.1.6 | IsisUnsigned16TC | read-only | The remaining lifetime, in seconds, for this LSP. |
| ISI isisLSPPDULength | 1.3.6.1.2.1.138.1.9.1.1.7 | IsisUnsigned16TC | read-only | The length of this LSP. |
| U32 isisLSPSeq | 1.3.6.1.2.1.138.1.9.1.1.3 | Unsigned32 | read-only | The sequence number for this LSP. |
| isisLSPSummaryEntry | 1.3.6.1.2.1.138.1.9.1.1 | not-accessible | Each entry provides a summary describing an LSP currently stored in the system. Dynamically learned rows will not survive an agent reboot. | |
| isisLSPSummaryTable | 1.3.6.1.2.1.138.1.9.1 | not-accessible | The table of LSP Headers. | |
| ISI isisLSPTLVChecksum | 1.3.6.1.2.1.138.1.9.2.1.3 | IsisUnsigned16TC | read-only | The 16-bit Fletcher Checksum for this LSP. |
| isisLSPTLVEntry | 1.3.6.1.2.1.138.1.9.2.1 | not-accessible | Each entry describes a TLV within an LSP currently stored in the system. Dynamically learned rows will not survive an agent reboot. | |
| U32 isisLSPTLVIndex | 1.3.6.1.2.1.138.1.9.2.1.1 | Unsigned32 | not-accessible | The index of this TLV in the LSP. The first TLV has index 1, and the Nth TLV has an index of N. |
| ISI isisLSPTLVLen | 1.3.6.1.2.1.138.1.9.2.1.5 | IsisUnsigned8TC | read-only | The length of this TLV. |
| U32 isisLSPTLVSeq | 1.3.6.1.2.1.138.1.9.2.1.2 | Unsigned32 | read-only | The sequence number for this LSP. |
| isisLSPTLVTable | 1.3.6.1.2.1.138.1.9.2 | not-accessible | The table of LSPs in the database. | |
| ISI isisLSPTLVType | 1.3.6.1.2.1.138.1.9.2.1.4 | IsisUnsigned8TC | read-only | The type of this TLV. |
| OCT isisLSPTLVValue | 1.3.6.1.2.1.138.1.9.2.1.6 | OCTET STRING | read-only | The value of this TLV. |
| NTF isisLSPTooLargeToPropagate | 1.3.6.1.2.1.138.0.14 | A notification sent when we attempt to propagate an LSP that is larger than the dataLinkBlockSize for the circuit. The agent must throttle the generation of consecutive isisLSPTooLargeToPropagate notifications so that there is at least a 5-second gap between notifications of this type. When notifications are throttled, they are dropped, not queued for sending at a future time. | ||
| T/F isisLSPZeroLife | 1.3.6.1.2.1.138.1.9.1.1.4 | TruthValue | read-only | Is this LSP being purged by this system? |
| ADR isisManAreaAddr | 1.3.6.1.2.1.138.1.1.2.1.1 | IsisOSINSAddress | not-accessible | A manually configured area address for this system. Note: An index for the entry {1, {49.0001} active} in this table would be the ordered pair (1, (0x03 0x49 0x00 0x01)), as the length of an octet string is part of the OID. |
| isisManAreaAddrEntry | 1.3.6.1.2.1.138.1.1.2.1 | not-accessible | Each entry contains one area address manually configured on this system. Dynamically created rows MUST survive an agent reboot. | |
| ROW isisManAreaAddrExistState | 1.3.6.1.2.1.138.1.1.2.1.2 | RowStatus | read-create | The state of the isisManAreaAddrEntry. If the isisSysAdminState for this Intermediate System is 'on' and an attempt is made to set this object to the value 'destroy' or 'notInService' when this is the only isisManAreaAddrEntry in state 'active' for this Intermediate System should return inconsistentValue. A row entry cannot be modified when the value of this object is 'active'. |
| isisManAreaAddrTable | 1.3.6.1.2.1.138.1.1.2 | not-accessible | The set of manual area addresses configured on this Intermediate System. At least one row in which the value of isisManAreaAddrExistState is active must be present. The maximum number of rows in this table for which the object isisManAreaAddrExistState has the value active is 3. An attempt to create more than 3 rows of isisManAreaAddrEntry with state 'active' in one instance of the IS-IS protocol should return inconsistentValue. | |
| NTF isisManualAddressDrops | 1.3.6.1.2.1.138.0.2 | This notification is generated when one of the manual areaAddresses assigned to this system is ignored when computing routes. The object isisNotificationAreaAddress describes the area that has been dropped. The number of times this event has been generated is counted by isisSysStatManAddrDropFromAreas. The agent must throttle the generation of consecutive isisManualAddressDrops notifications so that there is at least a 5-second gap between notifications of this type. When notifications are throttled, they are dropped, not queued for sending at a future time. | ||
| NTF isisMaxAreaAddressesMismatch | 1.3.6.1.2.1.138.0.6 | A notification sent when we receive a PDU with a different value for the Maximum Area Addresses. This notification includes the header of the packet, which may help a network manager identify the source of the confusion. The agent must throttle the generation of consecutive isisMaxAreaAddressesMismatch notifications so that there is at least a 5-second gap between notifications of this type. When notifications are throttled, they are dropped, not queued for sending at a future time. | ||
| isisMIB | 1.3.6.1.2.1.138 | This document describes a management information base for the IS-IS Routing protocol, as described in ISO 10589, when it is used to construct routing tables for IP networks, as described in RFC 1195. This document is based on a 1994 IETF document by Chris Gunner. This version has been modified to include current syntax, to exclude portions of the protocol that are not relevant to IP, and to add management support for current practice. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC 4444; see the RFC itself for full legal notices. | ||
| NUM isisNextCircIndex | 1.3.6.1.2.1.138.1.3.1 | IndexIntegerNextFree | read-only | This object is used to assist a management application in creating new rows in the isisCircTable. If it is possible to create a new instance of isisCircEntry, then this object will contain a non-zero value that is not in use as the index of any row in the isisCircTable. The network manager reads the value of this object and then (if the value read is non-zero) attempts to create the corresponding instance of isisCircEntry. If the set request fails with the code 'inconsistentValue', then the process must be repeated; if the set request succeeds, then the agent will change the value of this object according to an implementation-specific algorithm. |
| isisNotification | 1.3.6.1.2.1.138.1.10 | |||
| ADR isisNotificationAreaAddress | 1.3.6.1.2.1.138.1.10.1.15 | IsisOSINSAddress | accessible-for-notify | An Area Address. |
| U32 isisNotificationCircIfIndex | 1.3.6.1.2.1.138.1.10.1.2 | Unsigned32 | accessible-for-notify | The identifier of this circuit relevant to this notification. |
| isisNotificationEntry | 1.3.6.1.2.1.138.1.10.1 | |||
| isisNotificationGroup | 1.3.6.1.2.1.138.2.2.5 | The collections of notifications sent by an IS. | ||
| isisNotificationObjectGroup | 1.3.6.1.2.1.138.2.2.4 | The objects used to record notification parameters. | ||
| isisNotifications | 1.3.6.1.2.1.138.0 | |||
| ISI isisNotificationSysLevelIndex | 1.3.6.1.2.1.138.1.10.1.1 | IsisLevel | accessible-for-notify | The system level for this notification. |
| isisObjects | 1.3.6.1.2.1.138.1 | |||
| NTF isisOrigLSPBuffSizeMismatch | 1.3.6.1.2.1.138.0.15 | A notification sent when a Level 1 LSP or Level 2 LSP is received that is larger than the local value for isisSysLevelOrigLSPBuffSize, or when an LSP is received that contains the supported Buffer Size option and the value in the PDU option field does not match the local value for isisSysLevelOrigLSPBuffSize. We pass up the size from the option field and the size of the LSP when one of them exceeds our configuration. The agent must throttle the generation of consecutive isisOrigLSPBuffSizeMismatch notifications so that there is at least a 5-second gap between notifications of this type. When notifications are throttled, they are dropped, not queued for sending at a future time. | ||
| NTF isisOwnLSPPurge | 1.3.6.1.2.1.138.0.7 | A notification sent when we receive a PDU with our systemID and zero age. This notification includes the circuit Index and router ID from the LSP, if available, which may help a network manager identify the source of the confusion. | ||
| C32 isisPacketCountCSNP | 1.3.6.1.2.1.138.1.5.3.1.7 | Counter32 | read-only | The number of IS-IS CSNPs seen in this direction at this level. |
| INT isisPacketCountDirection | 1.3.6.1.2.1.138.1.5.3.1.2 | INTEGER | not-accessible | Were we sending or receiving these PDUs? |
| isisPacketCounterEntry | 1.3.6.1.2.1.138.1.5.3.1 | not-accessible | Information about IS-IS protocol traffic at one level, on one circuit, in one direction. | |
| isisPacketCounterTable | 1.3.6.1.2.1.138.1.5.3 | not-accessible | Information about IS-IS protocol traffic at one level, on one circuit, in one direction. | |
| C32 isisPacketCountESHello | 1.3.6.1.2.1.138.1.5.3.1.5 | Counter32 | read-only | The number of ES Hello PDUs seen in this direction. ESH PDUs are counted at the lowest enabled level: at L1 on L1 or L1L2 circuits, and at L2 otherwise. |
| C32 isisPacketCountIIHello | 1.3.6.1.2.1.138.1.5.3.1.3 | Counter32 | read-only | The number of IS-IS Hello PDUs seen in this direction at this level. Point-to-Point IIH PDUs are counted at the lowest enabled level: at L1 on L1 or L1L2 circuits, and at L2 otherwise. |
| C32 isisPacketCountISHello | 1.3.6.1.2.1.138.1.5.3.1.4 | Counter32 | read-only | The number of ES-IS Hello PDUs seen in this direction. ISH PDUs are counted at the lowest enabled level: at L1 on L1 or L1L2 circuits, and at L2 otherwise. |
| ISI isisPacketCountLevel | 1.3.6.1.2.1.138.1.5.3.1.1 | IsisISLevel | not-accessible | The level at which these PDU counts have been collected. |
| C32 isisPacketCountLSP | 1.3.6.1.2.1.138.1.5.3.1.6 | Counter32 | read-only | The number of IS-IS LSPs seen in this direction at this level. |
| C32 isisPacketCountPSNP | 1.3.6.1.2.1.138.1.5.3.1.8 | Counter32 | read-only | The number of IS-IS PSNPs seen in this direction at this level. |
| C32 isisPacketCountUnknown | 1.3.6.1.2.1.138.1.5.3.1.9 | Counter32 | read-only | The number of unknown IS-IS PDUs seen at this level. |
| ISI isisPduBufferSize | 1.3.6.1.2.1.138.1.10.1.10 | IsisUnsigned16TC | accessible-for-notify | Holds the size of LSP received from peer. |
| ISI isisPduFieldLen | 1.3.6.1.2.1.138.1.10.1.5 | IsisUnsigned8TC | accessible-for-notify | Holds the System ID length reported in PDU we received. |
| ISI isisPduFragment | 1.3.6.1.2.1.138.1.10.1.4 | IsisPDUHeader | accessible-for-notify | Holds up to 64 initial bytes of a PDU that triggered the notification. |
| ISI isisPduLspId | 1.3.6.1.2.1.138.1.10.1.3 | IsisLinkStatePDUID | accessible-for-notify | An Octet String that uniquely identifies a Link State PDU. |
| U32 isisPduLspSize | 1.3.6.1.2.1.138.1.10.1.8 | Unsigned32 | accessible-for-notify | Holds the size of LSP we received that is too big to forward. |
| ISI isisPduMaxAreaAddress | 1.3.6.1.2.1.138.1.10.1.6 | IsisUnsigned8TC | accessible-for-notify | Holds the Max Area Addresses reported in a PDU we received. |
| ISI isisPduOriginatingBufferSize | 1.3.6.1.2.1.138.1.10.1.9 | IsisUnsigned16TC | accessible-for-notify | Holds the size of isisSysLevelOrigLSPBuffSize advertised by the peer in the originatingLSPBufferSize TLV. If the peer does not advertise this TLV, this value is set to 0. |
| OCT isisPduProtocolsSupported | 1.3.6.1.2.1.138.1.10.1.11 | OCTET STRING | accessible-for-notify | The list of protocols supported by an adjacent system. This may be empty. |
| ISI isisPduProtocolVersion | 1.3.6.1.2.1.138.1.10.1.7 | IsisUnsigned8TC | accessible-for-notify | Holds the Protocol version reported in PDU we received. |
| NTF isisProtocolsSupportedMismatch | 1.3.6.1.2.1.138.0.16 | A notification sent when a non-pseudonode segment 0 LSP is received that has no matching protocols supported. This may be because the system does not generate the field, or because there are no common elements. The list of protocols supported should be included in the notification: it may be empty if the TLV is not supported, or if the TLV is empty. The agent must throttle the generation of consecutive isisProtocolsSupportedMismatch notifications so that there is at least a 5-second gap between notifications of this type. When notifications are throttled, they are dropped, not queued for sending at a future time. | ||
| ADR isisRAAddrPrefix | 1.3.6.1.2.1.138.1.7.1.1.4 | IsisOSINSAddress | read-create | The destination of this Reachable Address. This is an Address Prefix. This object follows the ReplaceOnlyWhileDisabled and ManualOrAutomatic behaviors. |
| ISI isisRAAdminState | 1.3.6.1.2.1.138.1.7.1.1.3 | IsisAdminState | read-create | The administrative state of the Reachable Address. This object follows the ManualOrAutomatic behaviors. |
| isisRAEntry | 1.3.6.1.2.1.138.1.7.1.1 | not-accessible | Each entry defines a configured Reachable Address to an NSAP or Address Prefix. Dynamically created rows MUST survive an agent reboot. | |
| ROW isisRAExistState | 1.3.6.1.2.1.138.1.7.1.1.2 | RowStatus | read-create | The existence state of this Reachable Address. This object follows the ManualOrAutomatic behaviors. Support for 'createAndWait' and 'notInService' is not required. A row entry cannot be modified when the value of this object is 'active'. |
| U32 isisRAIndex | 1.3.6.1.2.1.138.1.7.1.1.1 | Unsigned32 | not-accessible | The identifier for this isisRAEntry. This value must be unique amongst all Reachable Addresses on the same parent Circuit. |
| INT isisRAMapType | 1.3.6.1.2.1.138.1.7.1.1.5 | INTEGER | read-create | The type of mapping to be employed to ascertain the SNPA Address that should be used in forwarding PDUs for this Reachable Address prefix. This object follows the ManualOrAutomatic behavior. The following values of mapping type are defined: none: The mapping is null because the neighbor SNPA is implicit by nature of the subnetwork (e.g., a point-to-point linkage). explicit: The subnetwork addresses in the object isisRASNPAAddress are to be used. extractIDI: The SNPA is embedded in the IDI of the destination NSAP Address. The mapping algorithm extracts the SNPA to be used according to the format and encoding rules of ISO8473/Add2. This SNPA extraction algorithm can be used in conjunction with Reachable Address prefixes from the X.121, F.69, E.163, and E.164 addressing subdomains. extractDSP: All, or a suffix, of the SNPA is embedded in the DSP of the destination address. This SNPA extraction algorithm extracts the embedded subnetwork addressing information by performing a logical AND of the isisRASNPAMask object value with the destination address. The part of the SNPA extracted from the destination NSAP is appended to the isisRASNPAPrefix object value to form the next hop subnetwork addressing information. |
| ISI isisRAMetric | 1.3.6.1.2.1.138.1.7.1.1.6 | IsisDefaultMetric | read-create | The metric value for reaching the specified prefix over this circuit. This object follows the ManualOrAutomatic behavior. |
| ISI isisRAMetricType | 1.3.6.1.2.1.138.1.7.1.1.7 | IsisMetricType | read-create | Indicates whether the metric is internal or external. This object follows the ManualOrAutomatic behavior. |
| ADR isisRASNPAAddress | 1.3.6.1.2.1.138.1.7.1.1.8 | IsisOSINSAddress | read-create | The SNPA Address to which a PDU may be forwarded in order to reach a destination that matches the address prefix of the Reachable Address. This object follows the ManualOrAutomatic behavior. |
| ADR isisRASNPAMask | 1.3.6.1.2.1.138.1.7.1.1.9 | IsisOSINSAddress | read-create | A bit mask with 1 bit indicating the positions in the effective destination address from which embedded SNPA information is to be extracted. For the extraction, the first octet of the isisRASNPAMask object value is aligned with the first octet (AFI) of the NSAP Address. If the isisRASNPAMask object value and NSAP Address are of different lengths, the shorter of the two is logically padded with zeros before performing the extraction. This object follows the ManualOrAutomatic behavior. |
| ADR isisRASNPAPrefix | 1.3.6.1.2.1.138.1.7.1.1.10 | IsisOSINSAddress | read-create | A fixed SNPA prefix for use when the isisRAMapType is extractDSP. The SNPA Address to use is formed by concatenating the fixed SNPA prefix with a variable SNPA part that is extracted from the effective destination address. For Reachable Address prefixes in which the entire SNPA is embedded in the DSP, the SNPA Prefix shall be null. This object follows the ManualOrAutomatic behavior. |
| isisRATable | 1.3.6.1.2.1.138.1.7.1 | not-accessible | The table of Reachable Addresses to NSAPs or Address Prefixes. | |
| isisRATableGroup | 1.3.6.1.2.1.138.2.2.7 | The collections of objects used to manage the reachable NSAP prefixes. | ||
| INT isisRAType | 1.3.6.1.2.1.138.1.7.1.1.11 | INTEGER | read-create | The type of Reachable address. Those of type manual are created by the network manager. Those of type automatic are created through propagation of routing information from another routing protocol (e.g., IDRP). |
| isisReachAddr | 1.3.6.1.2.1.138.1.7 | |||
| isisReadOnlyCompliance | 1.3.6.1.2.1.138.2.1.3 | When this MIB is implemented without support for read-create (i.e., in read-only mode), the implementation can claim read-only compliance. Such a device can then be monitored but cannot be configured with this MIB. | ||
| IP isisRedistributeAddrAddress | 1.3.6.1.2.1.138.1.1.5.1.2 | InetAddress | not-accessible | The IP Address value for this summary address. The type of this address is determined by the value of the isisRedistributeAddrType object. The address must not contain any set host bits - bits set after the address prefix determined by isisRedistributeAddrPrefixLen. |
| isisRedistributeAddrEntry | 1.3.6.1.2.1.138.1.1.5.1 | not-accessible | Each entry contains one configured IP summary address to manage leaking L2 addresses into L1. Dynamically created rows MUST survive an agent reboot. Implementers need to be aware that if the total number of elements (octets or sub-identifiers) in isisRedistributeAddrAddress and isisRedistributeAddrPrefixLen is too great, then OIDs of column instances in this table will have more than 128 subidentifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3. | |
| ROW isisRedistributeAddrExistState | 1.3.6.1.2.1.138.1.1.5.1.4 | RowStatus | read-create | The existence state of this summary address. Support for createAndWait and notInService is not required. A row entry cannot be modified when the value of this object is 'active'. |
| ADR isisRedistributeAddrPrefixLen | 1.3.6.1.2.1.138.1.1.5.1.3 | InetAddressPrefixLength | not-accessible | The Length of the IP NetMask for this summary address. The values for the index objects isisRedistributeAddrAddress and isisRedistributeAddrPrefixLen must be consistent. When the value of isisRedistributeAddrAddress (excluding the zone index, if one is present) is x, then the bitwise logical-AND of x with the value of the mask formed from the corresponding index object isisRedistributeAddrPrefixLen MUST be equal to x. If not, then the index pair is not consistent, and an inconsistentName error must be returned on SET or CREATE requests. |
| isisRedistributeAddrTable | 1.3.6.1.2.1.138.1.1.5 | not-accessible | This table provides criteria to decide if a route should be leaked from L2 to L1 when Domain Wide Prefix leaking is enabled. Addresses that match the summary mask in the table MUST be announced at L1 by routers when isisSysL2toL1Leaking is enabled. Routes that fall into the ranges specified are announced as is, without being summarized. Routes that do not match a summary mask are not announced. | |
| IPt isisRedistributeAddrType | 1.3.6.1.2.1.138.1.1.5.1.1 | InetAddressType | not-accessible | The Type of IP address for this summary address. |
| NTF isisRejectedAdjacency | 1.3.6.1.2.1.138.0.13 | A notification sent when we receive a Hello PDU from an IS but do not establish an adjacency for some reason. The agent must throttle the generation of consecutive isisRejectedAdjacency notifications so that there is at least a 5-second gap between notifications of this type. When notifications are throttled, they are dropped, not queued for sending at a future time. | ||
| isisRouterEntry | 1.3.6.1.2.1.138.1.1.6.1 | not-accessible | Each entry tracks information about one Intermediate System at one level. Dynamically learned rows do not survive an agent reboot. | |
| STR isisRouterHostName | 1.3.6.1.2.1.138.1.1.6.1.3 | SnmpAdminString | read-only | The hostname listed in the LSP, or a zero-length string if none. |
| U32 isisRouterID | 1.3.6.1.2.1.138.1.1.6.1.4 | Unsigned32 | read-only | The Router ID found in the LSP, or zero if none. |
| ISI isisRouterLevel | 1.3.6.1.2.1.138.1.1.6.1.2 | IsisISLevel | not-accessible | The level at which the information about this Intermediate System was received. |
| ISI isisRouterSysID | 1.3.6.1.2.1.138.1.1.6.1.1 | IsisSystemID | not-accessible | The System ID of the Intermediate System. |
| isisRouterTable | 1.3.6.1.2.1.138.1.1.6 | not-accessible | The set of hostnames and router ID. | |
| NTF isisSequenceNumberSkip | 1.3.6.1.2.1.138.0.8 | When we receive an LSP with our System ID and different contents, we may need to reissue the LSP with a higher sequence number. We send this notification if we need to increase the sequence number by more than one. If two Intermediate Systems are configured with the same System ID, this notification will fire. | ||
| isisSummAddrEntry | 1.3.6.1.2.1.138.1.1.4.1 | not-accessible | Each entry contains one IP summary address. Dynamically created rows MUST survive an agent reboot. Implementers need to be aware that if the total number of elements (octets or sub-identifiers) in isisSummAddress and isisSummAddrPrefixLen is too great, then OIDs of column instances in this table will have more than 128 subidentifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3. | |
| IP isisSummAddress | 1.3.6.1.2.1.138.1.1.4.1.2 | InetAddress | not-accessible | The IP Address value for this summary address. The address must not contain any set host bits (bits set after the address prefix determined by isisSummAddrPrefixLen). The type of this address is determined by the value of the isisSummAddressType object. |
| IPt isisSummAddressType | 1.3.6.1.2.1.138.1.1.4.1.1 | InetAddressType | not-accessible | The Type of IP address for this summary address. |
| ROW isisSummAddrExistState | 1.3.6.1.2.1.138.1.1.4.1.4 | RowStatus | read-create | The existence state of this summary address. Support for 'createAndWait' and 'notInService' is not required. A row entry cannot be modified when the value of this object is 'active'. |
| ISI isisSummAddrFullMetric | 1.3.6.1.2.1.138.1.1.4.1.6 | IsisFullMetric | read-create | The wide metric value to announce this summary address within LSPs generated by this system. |
| ISI isisSummAddrMetric | 1.3.6.1.2.1.138.1.1.4.1.5 | IsisDefaultMetric | read-create | The metric value to announce this summary address within LSPs generated by this system. |
| ADR isisSummAddrPrefixLen | 1.3.6.1.2.1.138.1.1.4.1.3 | InetAddressPrefixLength | not-accessible | The Length of the IP NetMask for this summary address. The values for the index objects isisSummAddress and isisSummAddrPrefixLen must be consistent. When the value of isisSummAddress (excluding the zone index, if one is present) is x, then the bitwise logical-AND of x with the value of the mask formed from the corresponding index object isisSummAddrPrefixLen MUST be equal to x. If not, then the index pair is not consistent, and an inconsistentName error must be returned on SET or CREATE requests. |
| isisSummAddrTable | 1.3.6.1.2.1.138.1.1.4 | not-accessible | The set of IP summary addresses to use in forming summary TLVs originated by this Intermediate System. An administrator may use a summary address to combine and modify IP Reachability announcements. If the Intermediate system can reach any subset of the summary address, the summary address MUST be announced instead, at the configured metric. | |
| ISI isisSysAdminState | 1.3.6.1.2.1.138.1.1.1.8 | IsisAdminState | read-write | The administrative state of this Intermediate System. Setting this object to the value 'on' when its current value is 'off' enables the Intermediate System. Configured values MUST survive an agent reboot. |
| ISI isisSysID | 1.3.6.1.2.1.138.1.1.1.3 | IsisSystemID | read-write | The ID for this Intermediate System. This value is appended to each of the area addresses to form the Network Entity Titles. The derivation of a value for this object is implementation specific. Some implementations may automatically assign values and not permit an SNMP write, while others may require the value to be set manually. Configured values MUST survive an agent reboot. |
| T/F isisSysL2toL1Leaking | 1.3.6.1.2.1.138.1.1.1.9 | TruthValue | read-write | If true, allow the router to leak L2 routes into L1. Configured values MUST survive an agent reboot. |
| isisSysLevel | 1.3.6.1.2.1.138.1.2 | |||
| isisSysLevelEntry | 1.3.6.1.2.1.138.1.2.1.1 | not-accessible | Each row describes variables configured for Area or Domain. Configured values MUST survive an agent reboot. | |
| ISI isisSysLevelIndex | 1.3.6.1.2.1.138.1.2.1.1.1 | IsisISLevel | not-accessible | The level that this entry describes. |
| ISI isisSysLevelMetricStyle | 1.3.6.1.2.1.138.1.2.1.1.7 | IsisMetricStyle | read-write | Which style of metric do we generate in our LSPs at this level? |
| ISI isisSysLevelMinLSPGenInt | 1.3.6.1.2.1.138.1.2.1.1.3 | IsisUnsigned16TC | read-write | Minimum interval, in seconds, between successive generation of LSPs with the same LSPID at this level by this Intermediate System. |
| ISI isisSysLevelOrigLSPBuffSize | 1.3.6.1.2.1.138.1.2.1.1.2 | IsisLSPBuffSize | read-write | The maximum size of LSPs and SNPs originated by this Intermediate System at this level. This object may not be modified when the isisSysAdminState variable is in state 'on' for this Intermediate System. |
| T/F isisSysLevelSetOverload | 1.3.6.1.2.1.138.1.2.1.1.5 | TruthValue | read-write | Administratively set the overload bit for the level. The overload bit MUST continue to be set if the implementation runs out of memory, independent of this variable. It may also be set manually independent of this variable, using the isisSysLevelSetOverloadUntil object. |
| U32 isisSysLevelSetOverloadUntil | 1.3.6.1.2.1.138.1.2.1.1.6 | Unsigned32 | read-write | If this object is non-zero, the overload bit is set at this level when the isisSysAdminState variable goes to state 'on' for this Intermediate System. The overload bit remains set for isisSysLevelSetOverloadUntil seconds. When isisSysLevelSetOverloadUntil seconds have elapsed, the overload flag remains set if the implementation has run out of memory, or if it is set manually using the isisSysLevelSetOverload object. If isisSysLevelSetOverload is false, the system clears the overload bit when isisSysLevelSetOverloadUntil seconds have elapsed, if the system has not run out of memory. |
| ISI isisSysLevelSPFConsiders | 1.3.6.1.2.1.138.1.2.1.1.8 | IsisMetricStyle | read-write | Which style of metric do we consider in our SPF computation at this level? |
| ISI isisSysLevelState | 1.3.6.1.2.1.138.1.2.1.1.4 | IsisLevelState | read-only | The state of the database at this level. The value 'off' indicates that IS-IS is not active at this level. The value 'on' indicates that IS-IS is active at this level and is not overloaded. The value 'waiting' indicates a database that is low on an essential resource, such as memory. The administrator may force the state to 'overloaded' by setting the object isisSysLevelSetOverload. If the state is 'waiting' or 'overloaded', we originate LSPs with the overload bit set. |
| isisSysLevelTable | 1.3.6.1.2.1.138.1.2.1 | not-accessible | Level specific information about the System. | |
| T/F isisSysLevelTEEnabled | 1.3.6.1.2.1.138.1.2.1.1.9 | TruthValue | read-write | Do we do Traffic Engineering at this level? |
| ISI isisSysLevelType | 1.3.6.1.2.1.138.1.1.1.2 | IsisLevel | read-write | At which levels is the Intermediate System running? This object may not be modified when the isisSysAdminState variable is in state 'on' for this Intermediate System. Configured values MUST survive an agent reboot. |
| ISI isisSysMaxAge | 1.3.6.1.2.1.138.1.1.1.10 | IsisUnsigned16TC | read-write | Value to place in RemainingLifeTime field of the LSPs we generate. This should be at least 300 seconds greater than isisSysMaxLSPGenInt. Configured values MUST survive an agent reboot. |
| U32 isisSysMaxLSPGenInt | 1.3.6.1.2.1.138.1.1.1.5 | Unsigned32 | read-write | Maximum interval, in seconds, between generated LSPs by this Intermediate System. This object follows the ResettingTimer behavior. The value must be greater than any value configured for isisSysLevelMinLSPGenInt, and should be at least 300 seconds less than isisSysMaxAge. Configured values MUST survive an agent reboot. |
| U32 isisSysMaxPathSplits | 1.3.6.1.2.1.138.1.1.1.4 | Unsigned32 | read-write | Maximum number of paths with equal routing metric value which it is permitted to split between. This object may not be modified when the isisSysAdminState variable is in state 'on' for this Intermediate System. Configured values MUST survive an agent reboot. |
| T/F isisSysNotificationEnable | 1.3.6.1.2.1.138.1.1.1.13 | TruthValue | read-write | If this object is set to true(1), then it enables the emission of IS-IS Notifications. If it is set to false(2), these notifications are not sent. Configured values MUST survive an agent reboot. |
| isisSysObject | 1.3.6.1.2.1.138.1.1.1 | |||
| ISI isisSysPollESHelloRate | 1.3.6.1.2.1.138.1.1.1.6 | IsisUnsigned16TC | read-write | The value, in seconds, to be used for the suggested ES configuration timer in ISH PDUs when soliciting the ES configuration. Configured values MUST survive an agent reboot. |
| BIT isisSysProtSupported | 1.3.6.1.2.1.138.1.1.1.12 | Bits | read-only | This attribute contains the set of protocols supported by this Intermediate System. |
| ISI isisSysReceiveLSPBufferSize | 1.3.6.1.2.1.138.1.1.1.11 | IsisUnsigned16TC | read-write | Size of the largest buffer we are designed or configured to store. This should be at least as big as the maximum isisSysLevelOrigLSPBuffSize supported by the system. If resources allow, we will store and flood LSPs larger than isisSysReceiveLSPBufferSize, as this can help avoid problems in networks with different values for isisSysLevelOrigLSPBuffSize. Configured values MUST survive an agent reboot. |
| C32 isisSysStatAttmptToExMaxSeqNums | 1.3.6.1.2.1.138.1.5.1.1.7 | Counter32 | read-only | Number of times the IS has attempted to exceed the maximum sequence number. |
| C32 isisSysStatAuthFails | 1.3.6.1.2.1.138.1.5.1.1.4 | Counter32 | read-only | The number of authentication key failures recognized by this Intermediate System. |
| C32 isisSysStatAuthTypeFails | 1.3.6.1.2.1.138.1.5.1.1.3 | Counter32 | read-only | The number of authentication type mismatches recognized by this Intermediate System. |
| C32 isisSysStatCorrLSPs | 1.3.6.1.2.1.138.1.5.1.1.2 | Counter32 | read-only | Number of corrupted in-memory LSPs detected. LSPs received from the wire with a bad checksum are silently dropped and are not counted. LSPs received from the wire with parse errors are counted by isisSysStatLSPErrors. |
| C32 isisSysStatIDFieldLenMismatches | 1.3.6.1.2.1.138.1.5.1.1.10 | Counter32 | read-only | Number of times a PDU is received with a different value for ID field length from that of the receiving system. |
| ISI isisSysStatLevel | 1.3.6.1.2.1.138.1.5.1.1.1 | IsisISLevel | not-accessible | The level that this entry describes. |
| C32 isisSysStatLSPDbaseOloads | 1.3.6.1.2.1.138.1.5.1.1.5 | Counter32 | read-only | Number of times the LSP database has become overloaded. |
| C32 isisSysStatLSPErrors | 1.3.6.1.2.1.138.1.5.1.1.13 | Counter32 | read-only | Number of LSPs with errors we have received. |
| C32 isisSysStatManAddrDropFromAreas | 1.3.6.1.2.1.138.1.5.1.1.6 | Counter32 | read-only | Number of times a manual address has been dropped from the area. |
| C32 isisSysStatOwnLSPPurges | 1.3.6.1.2.1.138.1.5.1.1.9 | Counter32 | read-only | Number of times a zero-aged copy of the system's own LSP is received from some other node. |
| C32 isisSysStatPartChanges | 1.3.6.1.2.1.138.1.5.1.1.11 | Counter32 | read-only | Partition changes. |
| C32 isisSysStatSeqNumSkips | 1.3.6.1.2.1.138.1.5.1.1.8 | Counter32 | read-only | Number of times a sequence number skip has occurred. |
| C32 isisSysStatSPFRuns | 1.3.6.1.2.1.138.1.5.1.1.12 | Counter32 | read-only | Number of times we ran SPF at this level. |
| isisSystem | 1.3.6.1.2.1.138.1.1 | |||
| isisSystemCounterEntry | 1.3.6.1.2.1.138.1.5.1.1 | not-accessible | System-wide IS-IS counters. | |
| isisSystemCounterTable | 1.3.6.1.2.1.138.1.5.1 | not-accessible | System-wide counters for this Intermediate System. | |
| isisSystemGroup | 1.3.6.1.2.1.138.2.2.1 | The collections of objects used to manage an IS-IS router. | ||
| INT isisSysVersion | 1.3.6.1.2.1.138.1.1.1.1 | INTEGER | read-only | The version number of the IS-IS protocol that is implemented. |
| ISI isisSysWaitTime | 1.3.6.1.2.1.138.1.1.1.7 | IsisUnsigned16TC | read-write | Number of seconds to delay in state 'waiting' before entering the state 'on'. This object follows the ResettingTimer behavior. Configured values MUST survive an agent reboot. |
| NTF isisVersionSkew | 1.3.6.1.2.1.138.0.11 | A notification sent when we receive a Hello PDU from an IS running a different version of the protocol. This notification includes the header of the packet, which may help a network manager identify the source of the confusion. The agent must throttle the generation of consecutive isisVersionSkew notifications so that there is at least a 5-second gap between notifications of this type. When notifications are throttled, they are dropped, not queued for sending at a future time. |
RFC description
Defines objects for monitoring and managing IS-IS routing protocol (RFC 4444).
Start monitoring Vendor-neutral IETF standard, RFC 4444 (router/Layer 3 switch running IS-IS) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.