All MIBs › ISIS-MIB › isisSysWaitTime
isisSysWaitTime
Module: ISIS-MIB
OID (symbolic): ISIS-MIB::isisSysWaitTime
OID (numeric): 1.3.6.1.2.1.138.1.1.1.7
Node type: OBJECT-TYPE
Type: IsisUnsigned16TC
Access: read-write
Description: Number of seconds to delay in state 'waiting' before entering the state 'on'. This object follows the ResettingTimer behavior.
Configured values MUST survive an agent reboot.
What is isisSysWaitTime?
Sets how many seconds the router waits in the 'waiting' state before transitioning to 'on' when IS-IS starts up or recovers from an overload condition -- a settling-time delay before the router fully joins the topology.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.138.1.1.1.7 snmpwalk -v2c -c public <target> ISIS-MIB::isisSysWaitTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.138.1.1.1.7.1 snmpget -v2c -c public <target> ISIS-MIB::isisSysWaitTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.138.1.1.1.7.1 i <value>
Start monitoring Vendor-neutral IETF standard, RFC 4444 (router/Layer 3 switch running IS-IS) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ISIS-MIB::isisSysWaitTime OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard, RFC 4444 (router/Layer 3 switch running IS-IS) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.138 | isisMIB | ISIS-MIB |
| 1.3.6.1.2.1.138.1 | isisObjects | ISIS-MIB |
| 1.3.6.1.2.1.138.1.1 | isisSystem | ISIS-MIB |
| 1.3.6.1.2.1.138.1.1.1 | isisSysObject | ISIS-MIB |
| 1.3.6.1.2.1.138.1.1.1.7 | isisSysWaitTime | ISIS-MIB |