INTEL-WBR-MIB

All MIBs › INTEL-WBR-MIB

Category: Domain: WAN, Vendor: Intel

Description: Intel WAN bridge/router MIB providing SNMP objects for managing WAN interface bridging and routing on Intel access products.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is INTEL-WBR-MIB?

INTEL-WBR-MIB is a vendor-specific MIB for Intel's WAN Bridge/Router products, covering WAN bridging of IP and IPX traffic together with Spanning Tree Protocol status. It exposes base bridging configuration (whether IP/IPX bridging is enabled), STP bridge aging time and root status, and counters for transmitted, received, and failed BPDUs, including counters for spoofed BPDUs. Its monitoring emphasis is software/protocol-level bridging and STP health: whether the device holds the STP root role and BPDU exchange counts reveal spanning-tree stability, a topology-level fault indicator rather than a physical hardware sensor. It depends on the IEEE 802.1D Spanning Tree Protocol standard for its STP-related semantics. It is deployed on Intel WAN bridge/router access devices connecting remote sites over bridged WAN links, and administrators typically begin with an INTEL-WBR-MIB download to load these objects into their monitoring tools.

IPNetwork Monitor allows you to monitor SNMP objects defined in INTEL-WBR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Intel WAN bridge/router access device

Monitoring Examples

wbrStpBridgeIsRoot indicates whether this bridge currently holds the STP root role, while wbrStpRxBPDUs/wbrStpTxBPDUs and wbrStpTxBPDUsFailed reveal BPDU exchange health. wbrBaseLastConfigTime shows when bridging configuration last changed, and a spike in wbrStpRxSpoofBPDUs or wbrStpTxSpoofFailed would flag a potential spanning-tree spoofing or misconfiguration issue destabilizing the topology.

What Can Be Monitored

bridging enable status (IP/IPX)
STP root bridge status
BPDU transmit/receive counts
BPDU transmission failures
spoofed BPDU counts
bridge configuration change time

Imported Objects

From INTEL-GEN-MIB

mib2ext

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
TimeTicks

OIDs

OID symbolic	OID numeric	Type	Access	Description
wbr	1.3.6.1.4.1.343.6.25
wbrBase	1.3.6.1.4.1.343.6.25.1
INT wbrBaseBridging	1.3.6.1.4.1.343.6.25.1.2	INTEGER	read-only	Is Bridging (except of IP/IPX) enabled - 'Enabled' or 'Disabled'
INT wbrBaseBridgingIP	1.3.6.1.4.1.343.6.25.1.3	INTEGER	read-only	Is Bridging of IP traffic Enabled - 'Enabled' or 'Disabled'
INT wbrBaseBridgingIPX	1.3.6.1.4.1.343.6.25.1.4	INTEGER	read-only	Is Bridging of IPX traffic Enabled - 'Enabled' or 'Disabled'
TIK wbrBaseLastConfigTime	1.3.6.1.4.1.343.6.25.1.1	TimeTicks	read-only	Time of last change in bridge configuration
wbrStp	1.3.6.1.4.1.343.6.25.2
INT wbrStpBridgeAgeingTime	1.3.6.1.4.1.343.6.25.2.1	INTEGER	read-only	The Ageing Time configured for this Bridge
INT wbrStpBridgeIsRoot	1.3.6.1.4.1.343.6.25.2.2	INTEGER	read-only	Is this Bridge the Root Bridge - 'Yes' or 'No'
OCT wbrStpLinkBPDUSpoofing	1.3.6.1.4.1.343.6.25.2.10.1.16	OCTET STRING	read-only	Whether Configuration BPDU packets are spoofed - 'Yes' or 'Not Active'
INT wbrStpLinkConfigBPDUAge	1.3.6.1.4.1.343.6.25.2.10.1.15	INTEGER	read-only	The age of the information within the last Configuration BPDU packet received from the Designated Bridge
INT wbrStpLinkConfigBPDUAgeActive	1.3.6.1.4.1.343.6.25.2.10.1.14	INTEGER	read-only	Whether ConfigBPDUAge is active/valid for monitoring. If not active then ConfigBPDUAge is undefined i.e. 'Not Active'
INT wbrStpLinkConfigBPDUPending	1.3.6.1.4.1.343.6.25.2.10.1.12	INTEGER	read-only	Whether a Configuration BPDU packet is to be forwarded to the Bridges on the Designated ports (via Configuration BPDUs) - 'Yes' or 'No'
wbrStpLinkEntry	1.3.6.1.4.1.343.6.25.2.10.1		not-accessible
INT wbrStpLinkIfIndex	1.3.6.1.4.1.343.6.25.2.10.1.1	INTEGER	read-only	Link Index
OCT wbrStpLinkNonBPDUSpoofing	1.3.6.1.4.1.343.6.25.2.10.1.17	OCTET STRING	read-only	Whether Non-BPDU packets are spoofed - 'Yes' or 'Not Active'
CTR wbrStpLinkRxBPDUs	1.3.6.1.4.1.343.6.25.2.10.1.4	Counter	read-only	Number of BPDUs packets received
CTR wbrStpLinkRxProtocolBytes	1.3.6.1.4.1.343.6.25.2.10.1.2	Counter	read-only	BPDUs bytes received
CTR wbrStpLinkRxSpoofBPDUs	1.3.6.1.4.1.343.6.25.2.10.1.7	Counter	read-only	Number of BPDUs packets spoofed instead of received on link
INT wbrStpLinkSpoofing	1.3.6.1.4.1.343.6.25.2.10.1.18	INTEGER	read-only	If Spoofing is enabled in Setup
OCT wbrStpLinkSPTStatus	1.3.6.1.4.1.343.6.25.2.10.1.11	OCTET STRING	read-only	Status for Spanning Tree Link
wbrStpLinkTable	1.3.6.1.4.1.343.6.25.2.10		not-accessible	A table that contains port-specific information for the Spanning Tree Protocol.
INT wbrStpLinkTopologyChangeAck	1.3.6.1.4.1.343.6.25.2.10.1.13	INTEGER	read-only	Determines if the configuration change is to be forwarded to the Bridges on the Designated Ports (via Configuration BPDUs) - 'Yes' or 'No'
CTR wbrStpLinkTxBPDUs	1.3.6.1.4.1.343.6.25.2.10.1.5	Counter	read-only	Number of BPDUs packets transmitted
CTR wbrStpLinkTxBPDUsFailed	1.3.6.1.4.1.343.6.25.2.10.1.6	Counter	read-only	Number of BPDUs packets unsuccessfully transmitted from the link
CTR wbrStpLinkTxProtocolBytes	1.3.6.1.4.1.343.6.25.2.10.1.3	Counter	read-only	BPDU bytes transmitted
CTR wbrStpLinkTxSpoofBPDUs	1.3.6.1.4.1.343.6.25.2.10.1.8	Counter	read-only	Number of BPDUs packets spoofed instead of transmitted on link
CTR wbrStpLinkTxSpoofData	1.3.6.1.4.1.343.6.25.2.10.1.10	Counter	read-only	Number of packets spoofed instead of transmitted on link
CTR wbrStpLinkTxSpoofFailed	1.3.6.1.4.1.343.6.25.2.10.1.9	Counter	read-only	Number of spoofing protocol packets unsuccessfully transmitted from the link
CTR wbrStpRxBPDUs	1.3.6.1.4.1.343.6.25.2.3	Counter	read-only	Total number of BPDUs packets received
CTR wbrStpRxSpoofBPDUs	1.3.6.1.4.1.343.6.25.2.6	Counter	read-only	Total number of BPDUs packets spoofed instead of received
CTR wbrStpTxBPDUs	1.3.6.1.4.1.343.6.25.2.4	Counter	read-only	Total number of BPDUs packets transmitted
CTR wbrStpTxBPDUsFailed	1.3.6.1.4.1.343.6.25.2.5	Counter	read-only	Total number of BPDUs packets unsuccessfully transmitted
CTR wbrStpTxSpoofBPDUs	1.3.6.1.4.1.343.6.25.2.7	Counter	read-only	Total number of BPDUs packets spoofed instead of transmitted
CTR wbrStpTxSpoofData	1.3.6.1.4.1.343.6.25.2.9	Counter	read-only	Total number of packets spoofed instead of transmitted
CTR wbrStpTxSpoofFailed	1.3.6.1.4.1.343.6.25.2.8	Counter	read-only	Total number of spoofing protocol packets unsuccessfully transmitted
wbrTp	1.3.6.1.4.1.343.6.25.3
wbrTpLinkEntry	1.3.6.1.4.1.343.6.25.3.15.1		not-accessible
INT wbrTpLinkIfIndex	1.3.6.1.4.1.343.6.25.3.15.1.1	INTEGER	read-only	Link Index
CTR wbrTpLinkRxInvalid	1.3.6.1.4.1.343.6.25.3.15.1.7	Counter	read-only	Number of erroneous packets received
CTR wbrTpLinkRxOtherBytes	1.3.6.1.4.1.343.6.25.3.15.1.2	Counter	read-only	Non-BPDU bytes received
CTR wbrTpLinkRxRejDefaultMulticast	1.3.6.1.4.1.343.6.25.3.15.1.14	Counter	read-only	Number of packets received on this link which were rejected by the Default Action of the Multicast Destination Forwarding Table
CTR wbrTpLinkRxRejDefaultSource	1.3.6.1.4.1.343.6.25.3.15.1.15	Counter	read-only	Number of packets received on this link which were rejected by the Default Action of the Source Forwarding Table
CTR wbrTpLinkRxRejDefaultType	1.3.6.1.4.1.343.6.25.3.15.1.16	Counter	read-only	Number of packets received on this link which were rejected by the Default Action of the Type Forwarding Table
CTR wbrTpLinkRxRejDefaultUnicast	1.3.6.1.4.1.343.6.25.3.15.1.13	Counter	read-only	Number of packets received on this link which were rejected by the Default Action of the Unicast Destination Forwarding Table
CTR wbrTpLinkRxRejectedBytes	1.3.6.1.4.1.343.6.25.3.15.1.4	Counter	read-only	Number of non-BPDU bytes received on this link which were rejected
CTR wbrTpLinkRxRejMulticast	1.3.6.1.4.1.343.6.25.3.15.1.10	Counter	read-only	Number of packets received on this link which were rejected by the Multicast Destination Forwarding Table
CTR wbrTpLinkRxRejSource	1.3.6.1.4.1.343.6.25.3.15.1.11	Counter	read-only	Number of packets received on this link which were rejected by the Source Forwarding Table
CTR wbrTpLinkRxRejType	1.3.6.1.4.1.343.6.25.3.15.1.12	Counter	read-only	Number of packets received on this link which were rejected by the Type Forwarding Table
CTR wbrTpLinkRxRejUnicast	1.3.6.1.4.1.343.6.25.3.15.1.9	Counter	read-only	Number of packets received on this link which were rejected by the Unicast Destination Forwarding Table
CTR wbrTpLinkRxRejUnknown	1.3.6.1.4.1.343.6.25.3.15.1.6	Counter	read-only	Number of unknown Unicast packets received on the link which were discarded due to exceeding the maximum number of unknown Unicast packets (5 within 5 seconds for the entire Bridge)
wbrTpLinkTable	1.3.6.1.4.1.343.6.25.3.15		not-accessible	A table that contains information about every port that is associated with this transparent bridge.
CTR wbrTpLinkTxFailed	1.3.6.1.4.1.343.6.25.3.15.1.8	Counter	read-only	Number of non-BPDU packets unsuccessfully transmitted from the link
CTR wbrTpLinkTxOtherBytes	1.3.6.1.4.1.343.6.25.3.15.1.3	Counter	read-only	Non-BPDU bytes transmitted
CTR wbrTpLinkTxRejectedBytes	1.3.6.1.4.1.343.6.25.3.15.1.5	Counter	read-only	Number of non-BPDU bytes to be transmitted on this link which were rejected
CTR wbrTpRejDefaultMulticast	1.3.6.1.4.1.343.6.25.3.10	Counter	read-only	Total number of packets received which were rejected by the Default Action of the Multicast Destination Forwarding Table
CTR wbrTpRejDefaultSource	1.3.6.1.4.1.343.6.25.3.12	Counter	read-only	Total number of packets received which were rejected by the Default Action of the Source Forwarding Table
CTR wbrTpRejDefaultType	1.3.6.1.4.1.343.6.25.3.14	Counter	read-only	Total number of packets received which were rejected by the Default Action of the Type Forwarding Table
CTR wbrTpRejDefaultUnicast	1.3.6.1.4.1.343.6.25.3.8	Counter	read-only	Total number of packets received which were rejected by the Default Action of the Unicast Destination Forwarding Table
CTR wbrTpRejMulticast	1.3.6.1.4.1.343.6.25.3.9	Counter	read-only	Total number of packets received which were rejected by the Multicast Destination Forwarding Table
CTR wbrTpRejSource	1.3.6.1.4.1.343.6.25.3.11	Counter	read-only	Total number of packets received which were rejected by the Source Forwarding Table
CTR wbrTpRejType	1.3.6.1.4.1.343.6.25.3.13	Counter	read-only	Total number of packets received which were rejected by the Type Forwarding Table
CTR wbrTpRejUnicast	1.3.6.1.4.1.343.6.25.3.7	Counter	read-only	Total number of packets received which were rejected by the Unicast Destination Forwarding Table
CTR wbrTpRxInvalid	1.3.6.1.4.1.343.6.25.3.6	Counter	read-only	Total number of erroneous packets received
CTR wbrTpRxPackets	1.3.6.1.4.1.343.6.25.3.1	Counter	read-only	Total number of bridged packets (non BPDU packets) received
CTR wbrTpRxRejTotal	1.3.6.1.4.1.343.6.25.3.5	Counter	read-only	Total number of valid frames received which were rejected (i.e., filtered) by the Forwarding Process
CTR wbrTpRxRejUnknown	1.3.6.1.4.1.343.6.25.3.4	Counter	read-only	Total number of unknown Unicast packets received which were discarded due to exceeding the maximum number of unknown Unicast packets (5 within 5 seconds for the entire Bridge)
CTR wbrTpTxFailed	1.3.6.1.4.1.343.6.25.3.3	Counter	read-only	Total number of packets that the router failed to transmit
CTR wbrTpTxPackets	1.3.6.1.4.1.343.6.25.3.2	Counter	read-only	Total number of bridged packets (non BPDU packets) transmitted

RFC description

Monitors WAN bridging configuration, Spanning Tree Protocol (STP) status, and transparent bridging operations on Intel WAN routers.

Start monitoring Intel WAN bridges/routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download INTEL-WBR-MIB

What Is INTEL-WBR-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description