All MIBs › IPAD-MIB
Category: Domain: WAN, Vendor: ARRIS, Vendor: Verilink
Description:
Verilink IPAD base MIB providing core SNMP management objects for the IPAD integrated access device platform.
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| IpAddress | |
| TimeTicks | |
| enterprises |
From RFC1213-MIB
| DisplayString |
What Is IPAD-MIB?
IPAD-MIB is a vendor MIB from Verilink for its IPAD family of Integrated Access Devices (IADs), which combine Frame Relay/WAN access with LAN termination in a single box. It exposes Frame Relay port configuration and status objects, including LMI signaling parameters and per-port alarm thresholds for transmit and receive errors. This MIB is squarely aimed at monitoring the operational and fault status of the WAN interface hardware: whether a Frame Relay port is active, what LMI type/mode it is running, and whether receive or transmit alarm thresholds have been breached, which flags a degrading or failing WAN link. It is a self-contained proprietary MIB but is typically polled alongside standard IF-MIB interface counters for a complete picture. Deployment context is small-to-midsize branch offices or telco customer premises where an IPAD device provides Frame Relay-based WAN access. Engineers can download the IPAD-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in IPAD-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- Frame Relay port active/service state
- LMI type and mode
- receive alarm threshold and status
- transmit alarm threshold and status
- receive invalid-frame alarm status
Supported Devices
- Verilink IPAD Integrated Access Device
Monitoring Examples
An administrator would poll ipadFrPortTable/ipadFrPortTableEntry to enumerate each Frame Relay port and check ipadFrPortActive and ipadFrPortService to confirm the port is provisioned and up. Watching ipadFrPortRxAlmAlarm and ipadFrPortTxAlmAlarm against their configured ipadFrPortRxAlmThreshold and ipadFrPortTxAlmThreshold values reveals when error rates on a WAN link exceed acceptable bounds, often the first sign of a failing circuit. ipadFrPortLMIType and ipadFrPortLMIMode would be checked when a port fails to establish Frame Relay signaling with the carrier.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| verilink | 1.3.6.1.4.1.321 | |||
| hbu | 1.3.6.1.4.1.321.100 | |||
| NTF ipadFrPortRxInvalidFramesExceeded | 1.3.6.1.4.1.321.100.0.25000 | This trap is sent out when an ipad frame relay port receive invalid frames alarm threshold has been exceeded. | ||
| NTF ipadFrPortRxThroughputExceeded | 1.3.6.1.4.1.321.100.0.25001 | This trap is sent out when an ipad frame relay port receive throughput threshold has been exceeded. | ||
| NTF ipadFrPortTxThroughputExceeded | 1.3.6.1.4.1.321.100.0.25002 | This trap is sent out when an ipad frame relay port transmit throughput threshold has been exceeded. | ||
| NTF ipadDLCItxCIRexceeded | 1.3.6.1.4.1.321.100.0.25003 | This trap is sent out when the Tx over CIR threshold has been exceeded. This threshold is the number of frames in excess of CIR. | ||
| NTF ipadDLCItxBEexceeded | 1.3.6.1.4.1.321.100.0.25004 | This trap is sent out when the Tx over Be threshold has been exceeded. This threshold is the number of frames in excess of Be. | ||
| NTF ipadDLCIRxCongestionExceeded | 1.3.6.1.4.1.321.100.0.25005 | This trap is sent out when the Rx congestion threshold has been exceeded. This threshold is the number of frames received with BECN/FECN. | ||
| NTF ipadUserTxExceeded | 1.3.6.1.4.1.321.100.0.25006 | This trap is sent out when the Tx throughput threshold in bits per second has been exceeded. This threshold represents the number of bits for the user-selected protocol. | ||
| NTF ipadDlciRxBECNinCIRAlarm | 1.3.6.1.4.1.321.100.0.25007 | This trap is sent out when a frame with BECN set has been received within CIR. | ||
| NTF ipadDlciUASExceeded | 1.3.6.1.4.1.321.100.0.25008 | This trap is sent out when the UAS (unavailable seconds) threshold for the DLCI has been exceeded. | ||
| NTF ipadserialDteDTRAlarmExists | 1.3.6.1.4.1.321.100.0.25009 | This trap is sent out when a DTR Loss alarm is declared. | ||
| NTF ipadt1e1ESAlarmDeclared | 1.3.6.1.4.1.321.100.0.25010 | This trap is sent out when an Errored Seconds alarm is declared. | ||
| NTF ipadt1e1SESAlarmDeclared | 1.3.6.1.4.1.321.100.0.25011 | This trap is sent out when a Severely Errored Seconds alarm is declared. | ||
| NTF ipadt1e1LOSSAlarmDeclared | 1.3.6.1.4.1.321.100.0.25012 | This trap is sent out when a Loss of Signal Seconds alarm is declared. | ||
| NTF ipadt1e1UASAlarmDeclared | 1.3.6.1.4.1.321.100.0.25013 | This trap is sent out when an Unavailable Seconds alarm is declared. | ||
| NTF ipadt1e1CSSAlarmDeclared | 1.3.6.1.4.1.321.100.0.25014 | This trap is sent out when a Controlled Slip Seconds alarm is declared. | ||
| NTF ipadt1e1BPVSAlarmDeclared | 1.3.6.1.4.1.321.100.0.25015 | This trap is sent out when a Bipolar Violation Seconds alarm is declared. | ||
| NTF ipadt1e1OOFSAlarmDeclared | 1.3.6.1.4.1.321.100.0.25016 | This trap is sent out when an Out of Frame Seconds alarm is declared. | ||
| NTF ipadt1e1AISAlarmExists | 1.3.6.1.4.1.321.100.0.25017 | This trap is sent out when an Alarm Indication Signal alarm is declared. | ||
| NTF ipadt1e1RASAlarmExists | 1.3.6.1.4.1.321.100.0.25018 | This trap is sent out when a Remote Alarm Signal alarm is declared. | ||
| NTF ipadDLCIremoteSOSAlarm | 1.3.6.1.4.1.321.100.0.25019 | This trap is sent when the remote unit for a DLCI senses and reports an SOS condition. | ||
| ipad | 1.3.6.1.4.1.321.100.1 | |||
| ipadFrPort | 1.3.6.1.4.1.321.100.1.1 | |||
| ipadFrPortTable | 1.3.6.1.4.1.321.100.1.1.1 | not-accessible | Table of frame relay port parameters. | |
| ipadFrPortTableEntry | 1.3.6.1.4.1.321.100.1.1.1.1 | not-accessible | An entry in the ipad frame relay port table. | |
| INT ipadFrPortService | 1.3.6.1.4.1.321.100.1.1.1.1.1 | INTEGER | read-only | Index into the ipad frame relay port table; an entry in the ipad service table. |
| INT ipadFrPortActive | 1.3.6.1.4.1.321.100.1.1.1.1.2 | INTEGER | read-only | Specifies if the port is active. |
| INT ipadFrPortLMIType | 1.3.6.1.4.1.321.100.1.1.1.1.3 | INTEGER | read-only | Specifies the link management information type used on this port. |
| INT ipadFrPortLMIMode | 1.3.6.1.4.1.321.100.1.1.1.1.4 | INTEGER | read-only | Specifies the link management information mode used on this port. |
| INT ipadFrPortRxInvAlmThreshold | 1.3.6.1.4.1.321.100.1.1.1.1.5 | INTEGER | read-write | Sets the rx invalid frames alarm threshold. Setting this field to 0 disables the alarm. |
| INT ipadFrPortRxInvAlmAlarm | 1.3.6.1.4.1.321.100.1.1.1.1.6 | INTEGER | read-only | Reports if the invalid frames threshold has been exceeded. |
| INT ipadFrPortTxAlmThreshold | 1.3.6.1.4.1.321.100.1.1.1.1.7 | INTEGER | read-write | Sets the tx throughput alarm threshold (in octets/second). Setting this field to 0 disables the alarm. |
| INT ipadFrPortTxAlmAlarm | 1.3.6.1.4.1.321.100.1.1.1.1.8 | INTEGER | read-only | Reports if the tx throughput threshold has been exceeded. |
| INT ipadFrPortRxAlmThreshold | 1.3.6.1.4.1.321.100.1.1.1.1.9 | INTEGER | read-write | Sets the rx throughput alarm threshold (in octets/second). Setting this field to 0 disables the alarm. |
| INT ipadFrPortRxAlmAlarm | 1.3.6.1.4.1.321.100.1.1.1.1.10 | INTEGER | read-only | Reports if the rx throughput threshold has been exceeded. |
| ipadService | 1.3.6.1.4.1.321.100.1.2 | |||
| ipadServiceTable | 1.3.6.1.4.1.321.100.1.2.1 | not-accessible | The ipad service table. | |
| ipadServiceTableEntry | 1.3.6.1.4.1.321.100.1.2.1.1 | not-accessible | An entry in the ipad service table. | |
| INT ipadServiceIndex | 1.3.6.1.4.1.321.100.1.2.1.1.1 | INTEGER | read-only | The index for the ipad service table. |
| INT ipadServiceifIndex | 1.3.6.1.4.1.321.100.1.2.1.1.2 | INTEGER | read-write | The MIB-II ifIndex for this service. |
| INT ipadServiceType | 1.3.6.1.4.1.321.100.1.2.1.1.3 | INTEGER | read-write | The type of this service. |
| INT ipadServicePair | 1.3.6.1.4.1.321.100.1.2.1.1.4 | INTEGER | read-write | An entry in this table, which establishes a service pairing. |
| INT ipadServiceAddService | 1.3.6.1.4.1.321.100.1.2.2 | INTEGER | read-write | Adds a row to the Service Table. |
| INT ipadServiceDeleteService | 1.3.6.1.4.1.321.100.1.2.3 | INTEGER | read-write | Identifies a Service to be deleted; an index into the Service Table. |
| ipadChannel | 1.3.6.1.4.1.321.100.1.3 | |||
| ipadChannelTable | 1.3.6.1.4.1.321.100.1.3.1 | not-accessible | The ipad channel table. | |
| ipadChannelTableEntry | 1.3.6.1.4.1.321.100.1.3.1.1 | not-accessible | An entry in the ipad channel table. | |
| INT ipadChannelifIndex | 1.3.6.1.4.1.321.100.1.3.1.1.1 | INTEGER | read-only | Primary index into ipad channel table, MIB-II ifIndex. |
| INT ipadChannelIndex | 1.3.6.1.4.1.321.100.1.3.1.1.2 | INTEGER | read-only | Channel index for the physical interface. |
| INT ipadChannelService | 1.3.6.1.4.1.321.100.1.3.1.1.3 | INTEGER | read-write | Index into service table for this channel. |
| INT ipadChannelPair | 1.3.6.1.4.1.321.100.1.3.1.1.4 | INTEGER | read-write | Pair for this channel; an entry in the channel table. Use service pair in service table to determine which service contains this channel. |
| INT ipadChannelRate | 1.3.6.1.4.1.321.100.1.3.1.1.5 | INTEGER | read-write | Rate for this channel. |
| ipadDLCI | 1.3.6.1.4.1.321.100.1.4 | |||
| ipadDLCITable | 1.3.6.1.4.1.321.100.1.4.1 | not-accessible | The ipad DLCI table. | |
| ipadDLCITableEntry | 1.3.6.1.4.1.321.100.1.4.1.1 | not-accessible | An entry in the ipad DLCI table. | |
| INT ipadDLCIservice | 1.3.6.1.4.1.321.100.1.4.1.1.1 | INTEGER | read-only | An index into the ipad service table. |
| INT ipadDLCInumber | 1.3.6.1.4.1.321.100.1.4.1.1.2 | INTEGER | read-only | The DLCI number for this entry. |
| INT ipadDLCIactive | 1.3.6.1.4.1.321.100.1.4.1.1.3 | INTEGER | read-only | Specifies if the DLCI is active. |
| INT ipadDLCIcongestion | 1.3.6.1.4.1.321.100.1.4.1.1.4 | INTEGER | read-only | Specifies if the dlci is receiving frames with FECN or BECN bit set. |
| INT ipadDLCIremote | 1.3.6.1.4.1.321.100.1.4.1.1.5 | INTEGER | read-only | Remote DLCI number. |
| STR ipadDLCIremoteUnit | 1.3.6.1.4.1.321.100.1.4.1.1.6 | DisplayString | read-only | Name of the remote DLCI. |
| INT ipadDLCIremoteEquipActive | 1.3.6.1.4.1.321.100.1.4.1.1.7 | INTEGER | read-only | Reports if the equipment attached to the remote unit is active. |
| INT ipadDLCIencapsulation | 1.3.6.1.4.1.321.100.1.4.1.1.8 | INTEGER | read-write | Type of protocol encapsulation used on this DLCI. |
| INT ipadDLCIproprietary | 1.3.6.1.4.1.321.100.1.4.1.1.9 | INTEGER | read-write | When the encapsulation is proprietary, the traffic type must be configured to gather protocol specific statistics. |
| INT ipadDLCIpropOffset | 1.3.6.1.4.1.321.100.1.4.1.1.10 | INTEGER | read-write | When the encapsulation is proprietary, this is the number of bytes after the frame relay header to look for the specified protocol decode. |
| INT ipadDLCIinBand | 1.3.6.1.4.1.321.100.1.4.1.1.11 | INTEGER | read-write | Determines if frames on this DLCI will be parsed to look for management frames destined for the unit itself. |
| INT ipadDLCICIR | 1.3.6.1.4.1.321.100.1.4.1.1.12 | INTEGER | read-write | Default committed information rate in bits per second. |
| INT ipadDLCIBe | 1.3.6.1.4.1.321.100.1.4.1.1.13 | INTEGER | read-write | Default excess burst rate in bits per second. |
| INT ipadDLCIminBC | 1.3.6.1.4.1.321.100.1.4.1.1.14 | INTEGER | read-write | If the corresponding interface is configured to enable congestion management, the minimum transfer rate at which the unit will throttle back offering data to the network. |
| INT ipadDLCIrxMon | 1.3.6.1.4.1.321.100.1.4.1.1.15 | INTEGER | read-write | Determines if the SLA parameters will be monitored for received frames. |
| INT ipadDLCIdEctrl | 1.3.6.1.4.1.321.100.1.4.1.1.16 | INTEGER | read-write | Determines if the Rx monitor will set the DE bit on all frames received in excess of the CIR before they are switched to their destination port. |
| INT ipadDLCIenableDelay | 1.3.6.1.4.1.321.100.1.4.1.1.17 | INTEGER | read-write | Enable or disable delay. |
| INT ipadDLCItxExCIRThreshold | 1.3.6.1.4.1.321.100.1.4.1.1.18 | INTEGER | read-write | Sets the Tx over CIR alarm threshold. This threshold is the number of octets per second in excess of CIR. Setting this field to 0 disables the alarm. |
| INT ipadDLCItxExCIRAlarm | 1.3.6.1.4.1.321.100.1.4.1.1.19 | INTEGER | read-only | Reports if the Tx over CIR threshold has been exceeded. |
| INT ipadDLCItxExBeThreshold | 1.3.6.1.4.1.321.100.1.4.1.1.20 | INTEGER | read-write | Sets the Tx over Be alarm threshold. This threshold is the number of octets per second in excess of Be. Setting this field to 0 disables the alarm. |
| INT ipadDLCItxExBeAlarm | 1.3.6.1.4.1.321.100.1.4.1.1.21 | INTEGER | read-only | Reports if the Tx over Be threshold has been exceeded. |
| INT ipadDLCIrxCongThreshold | 1.3.6.1.4.1.321.100.1.4.1.1.22 | INTEGER | read-write | Sets the Rx congestion alarm threshold. This threshold is the number of frames received with BECN/FECN. Setting this field to 0 disables the alarm. |
| INT ipadDLCIrxCongAlarm | 1.3.6.1.4.1.321.100.1.4.1.1.23 | INTEGER | read-only | Reports if the Rx congestion threshold has been exceeded. |
| INT ipadDLCIrxBECNinCIR | 1.3.6.1.4.1.321.100.1.4.1.1.24 | INTEGER | read-only | Reports if BECN has been received within CIR. |
| INT ipadDLCIUASThreshold | 1.3.6.1.4.1.321.100.1.4.1.1.25 | INTEGER | read-write | Sets the UAS (unavailable seconds) alarm threshold. This threshold is the number of seconds passed that the DLCI is unavailable. Setting this field to 0 disables the alarm. |
| INT ipadDLCIUASAlarm | 1.3.6.1.4.1.321.100.1.4.1.1.26 | INTEGER | read-only | Reports if the UAS threshold has been exceeded. |
| TIK ipadDLCILastChange | 1.3.6.1.4.1.321.100.1.4.2 | TimeTicks | read-only | Time of the last change in the DLCI table. |
| ipadEndpoint | 1.3.6.1.4.1.321.100.1.5 | |||
| ipadEndpointTable | 1.3.6.1.4.1.321.100.1.5.1 | not-accessible | The ipad endpoint table. | |
| ipadEndpointTableEntry | 1.3.6.1.4.1.321.100.1.5.1.1 | not-accessible | An entry in the ipad endpoint table. | |
| INT ipadEndpointIndex | 1.3.6.1.4.1.321.100.1.5.1.1.1 | INTEGER | read-only | The index into the ipad endpoint table. |
| STR ipadEndpointName | 1.3.6.1.4.1.321.100.1.5.1.1.2 | DisplayString | read-write | The name for the endpoint. |
| INT ipadEndpointService | 1.3.6.1.4.1.321.100.1.5.1.1.3 | INTEGER | read-write | An index into the ipad service table. |
| INT ipadEndpointDLCInumber | 1.3.6.1.4.1.321.100.1.5.1.1.4 | INTEGER | read-write | Data link connection identifier for this endpoint; The DLCI number for this entry. |
| INT ipadEndpointType | 1.3.6.1.4.1.321.100.1.5.1.1.5 | INTEGER | read-write | Endpoint type. |
| INT ipadEndpointForward | 1.3.6.1.4.1.321.100.1.5.1.1.6 | INTEGER | read-write | Index into the endpoint names table. This is the endpoint on which data should be forwarded for switched endpoints. |
| INT ipadEndpointBackup | 1.3.6.1.4.1.321.100.1.5.1.1.7 | INTEGER | read-write | Index into the endpoint table. This is the endpoint on which data should be forwarded in the case where the endpoint becomes inactive. |
| INT ipadEndpointRefSLP | 1.3.6.1.4.1.321.100.1.5.1.1.8 | INTEGER | read-write | Index into the endpoint table. The service level parameters can be copied from another configured endpoint. |
| IP ipadEndpointRemoteIpAddr | 1.3.6.1.4.1.321.100.1.5.1.1.9 | IpAddress | read-write | IP address for remote. |
| IP ipadEndpointRemoteIpMask | 1.3.6.1.4.1.321.100.1.5.1.1.10 | IpAddress | read-write | IP address mask for remote. |
| STR ipadEndpointAddEndpoint | 1.3.6.1.4.1.321.100.1.5.2 | DisplayString | read-write | Identifies an Endpoint to be added. |
| STR ipadEndpointDeleteEndpoint | 1.3.6.1.4.1.321.100.1.5.3 | DisplayString | read-write | Identifies an Endpoint to be deleted. |
| TIK ipadEndpointLastChange | 1.3.6.1.4.1.321.100.1.5.4 | TimeTicks | read-only | Time of the last change in the Endpoint table. |
| ipadUser | 1.3.6.1.4.1.321.100.1.6 | |||
| ipadUserTable | 1.3.6.1.4.1.321.100.1.6.1 | not-accessible | Table of user selected parameters. | |
| ipadUserTableEntry | 1.3.6.1.4.1.321.100.1.6.1.1 | not-accessible | An entry in the ipad user table. | |
| INT ipadUserIndex | 1.3.6.1.4.1.321.100.1.6.1.1.1 | INTEGER | read-only | Index into the ipad user table. |
| INT ipadUserFilterByDLCI | 1.3.6.1.4.1.321.100.1.6.1.1.2 | INTEGER | read-write | Enables Service+DLCI filtering for this user statistic. |
| INT ipadUserService | 1.3.6.1.4.1.321.100.1.6.1.1.3 | INTEGER | read-write | Specifies the service for this user type; identifies an entry in the ipad DLCI table when combined with ipadUserDLCI. Meaningful when ipadUserFilterByDLCI is enabled. Meaningless when collecting PPP statistics. |
| INT ipadUserDLCI | 1.3.6.1.4.1.321.100.1.6.1.1.4 | INTEGER | read-write | Specifies the DLCI for this user type; identifies an entry in the ipad DLCI table when combined with ipadUserService. Meaningful when ipadUserFilterByDLCI is enabled. Meaningless when collecting PPP statistics. |
| INT ipadUserFilterByIPAddress | 1.3.6.1.4.1.321.100.1.6.1.1.5 | INTEGER | read-write | Enables IP address filtering for this user statistic. A packet is counted towards the user statistics if the result of a bitwise-and of an IP address in a transmitted packet with ipadUserIPMask equals ipadUserIPAddress. |
| IP ipadUserIPAddress | 1.3.6.1.4.1.321.100.1.6.1.1.6 | IpAddress | read-write | Specifies the IP address for this user type. |
| IP ipadUserIPMask | 1.3.6.1.4.1.321.100.1.6.1.1.7 | IpAddress | read-write | Specifies the IP address mask for this user type. |
| INT ipadUserFilterByIPPort | 1.3.6.1.4.1.321.100.1.6.1.1.8 | INTEGER | read-write | Enables IP Port filtering for this user statistic. |
| INT ipadUserIPPort | 1.3.6.1.4.1.321.100.1.6.1.1.9 | INTEGER | read-write | Specifies the IP port for this user type. |
| INT ipadUserTxAlmThreshold | 1.3.6.1.4.1.321.100.1.6.1.1.10 | INTEGER | read-write | Sets the tx throughput alarm threshold in octets per second. Setting this field to 0 disables the alarm. |
| INT ipadUserTxAlmAlarm | 1.3.6.1.4.1.321.100.1.6.1.1.11 | INTEGER | read-only | Reports if the tx throughput threshold has been exceeded. |
| INT ipadUserIPStatTimeRemaining | 1.3.6.1.4.1.321.100.1.6.2 | INTEGER | read-write | Specifies seconds until the next IP TopN report is generated. |
| INT ipadUserIPStatTimeDuration | 1.3.6.1.4.1.321.100.1.6.3 | INTEGER | read-only | The value of TimeRemaining when TimeRemaining was last set. Indicates the number of seconds that the next IP TopN report will cover. |
| TIK ipadUserIPStatStartTime | 1.3.6.1.4.1.321.100.1.6.4 | TimeTicks | read-only | The value of SysUpTime when TimeRemaining was last set. |
| INT ipadUserIPStatRequestedReportSize | 1.3.6.1.4.1.321.100.1.6.5 | INTEGER | read-write | Determines the requested maximum number of entries in the topN report. |
| INT ipadUserIPStatGrantedReportSize | 1.3.6.1.4.1.321.100.1.6.6 | INTEGER | read-only | Determines the granted number of entries in the topN report. This is by definition less than or equal to requested report size. |
| INT ipadUserIPStatReportNumber | 1.3.6.1.4.1.321.100.1.6.7 | INTEGER | read-only | Specifies the number of reports that have been generated. This value resets to zero when the unit is restarted. |
| INT ipadUserIPStatDiscardType | 1.3.6.1.4.1.321.100.1.6.8 | INTEGER | read-write | The internal table used to track TopN statistics is finite in size. On the condition when the internal table is full and a new IP address is encountered, an element already existing in the table must be removed. This variable determines the manner of selection. Writing byTime(1) will cause the entry with the least recent frame to be discarded. That is, all other entries in the table will have transmitted or received at least one packet more recently. Writing byFrames(2) will select the entry with the fewest transmitted or received frames. Writing byOctets(3) will select the entry with the fewest transmitted or received octets. The default is byTime(1). |
| ipadPPP | 1.3.6.1.4.1.321.100.1.7 | |||
| ipadPPPCfgTable | 1.3.6.1.4.1.321.100.1.7.1 | not-accessible | The ipad PPP configuration table. | |
| ipadPPPCfgTableEntry | 1.3.6.1.4.1.321.100.1.7.1.1 | not-accessible | An entry in the ipad PPP configuration table. | |
| INT ipadPPPCfgService | 1.3.6.1.4.1.321.100.1.7.1.1.1 | INTEGER | read-only | The index into the PPP configuration table; an entry in the ipad service table. |
| INT ipadPPPCfgDialMode | 1.3.6.1.4.1.321.100.1.7.1.1.2 | INTEGER | read-write | Determines the permancency of a communications connection. |
| INT ipadPPPCfgInactivityTimer | 1.3.6.1.4.1.321.100.1.7.1.1.3 | INTEGER | read-write | Determines when a dial-up or demand-dial connection will be disconnected due to inactivity in both directions. When this parameter is set to zero then the timer is disabled. |
| INT ipadPPPCfgNegotiationInit | 1.3.6.1.4.1.321.100.1.7.1.1.4 | INTEGER | read-write | Determines if the port waits for the other end to initiate parameter negotiations. |
| INT ipadPPPCfgMRU | 1.3.6.1.4.1.321.100.1.7.1.1.5 | INTEGER | read-write | The maximum receive unit the interface will accept. Valid values are in the range 128 - 4096, default is 1500. |
| INT ipadPPPCfgACCM | 1.3.6.1.4.1.321.100.1.7.1.1.6 | INTEGER | read-write | Sets the async control character map used when generating async HDLC frames. Setting a bit in the map causes the corresponding character to be mapped for transparency. |
| INT ipadPPPCfgNegMRU | 1.3.6.1.4.1.321.100.1.7.1.1.7 | INTEGER | read-write | Determines if MRU size is negotiated. |
| INT ipadPPPCfgNegACCM | 1.3.6.1.4.1.321.100.1.7.1.1.8 | INTEGER | read-write | Determines if ACCM is negotiated. |
| INT ipadPPPCfgNegMagic | 1.3.6.1.4.1.321.100.1.7.1.1.9 | INTEGER | read-write | Determines if the magic number is negotiated. |
| INT ipadPPPCfgNegCompression | 1.3.6.1.4.1.321.100.1.7.1.1.10 | INTEGER | read-write | Determines if the PPP protocol header compression is negotiated. |
| INT ipadPPPCfgNegAddress | 1.3.6.1.4.1.321.100.1.7.1.1.11 | INTEGER | read-write | Determines if the PPP HDLC header compression is negotiated. |
| INT ipadPPPCfgNegPAP | 1.3.6.1.4.1.321.100.1.7.1.1.12 | INTEGER | read-write | Determines if PAP is negotiated with the peer when a more secure authentication protocol is rejected. |
| INT ipadPPPCfgNegCHAP | 1.3.6.1.4.1.321.100.1.7.1.1.13 | INTEGER | read-write | Determines if CHAP is negotiated with the peer when a more secure authentication protocol is rejected. |
| INT ipadPPPCfgAllowPAP | 1.3.6.1.4.1.321.100.1.7.1.1.14 | INTEGER | read-write | Determines if PAP is allowed to be negotiated by the peer. |
| INT ipadPPPCfgAllowCHAP | 1.3.6.1.4.1.321.100.1.7.1.1.15 | INTEGER | read-write | Determines if CHAP is allowed to be negotiated by the peer. |
| STR ipadPPPCfgPAPUsername | 1.3.6.1.4.1.321.100.1.7.1.1.16 | DisplayString | read-write | Identification string to determine the user identity. |
| STR ipadPPPCfgPAPPassword | 1.3.6.1.4.1.321.100.1.7.1.1.17 | DisplayString | read-write | Password string to validate the user identity. |
| STR ipadPPPCfgCHAPUsername | 1.3.6.1.4.1.321.100.1.7.1.1.18 | DisplayString | read-write | Identification string to determine the user identity. |
| STR ipadPPPCfgCHAPSecret | 1.3.6.1.4.1.321.100.1.7.1.1.19 | DisplayString | read-write | Password string to validate the user identity. |
| IP ipadPPPCfgPortIpAddress | 1.3.6.1.4.1.321.100.1.7.1.1.20 | IpAddress | read-write | Sets the IP address of the unit's port. |
| IP ipadPPPCfgPeerIpAddress | 1.3.6.1.4.1.321.100.1.7.1.1.21 | IpAddress | read-write | Sets the IP address of the unit's peer. |
| INT ipadPPPCfgNegIpAddress | 1.3.6.1.4.1.321.100.1.7.1.1.22 | INTEGER | read-write | Determines if IP addresses are dynamically negotiated. |
| INT ipadPPPCfgNegIPCPCompression | 1.3.6.1.4.1.321.100.1.7.1.1.23 | INTEGER | read-write | Determines if Van Jacobson TCPIP header compression is negotiated. |
| IP ipadPPPCfgSubnetMask | 1.3.6.1.4.1.321.100.1.7.1.1.24 | IpAddress | read-write | Specifies the subnet mask. |
| INT ipadPPPCfgAuthChallengeInterval | 1.3.6.1.4.1.321.100.1.7.1.1.25 | INTEGER | read-write | Specifies the authentication challenge interval. |
| ipadPPPPAPTable | 1.3.6.1.4.1.321.100.1.7.2 | not-accessible | Table of PAP authentication parameters. | |
| ipadPPPPAPTableEntry | 1.3.6.1.4.1.321.100.1.7.2.1 | not-accessible | An entry in the ipad PPP PAP table. | |
| INT ipadPPPPAPTableIndex | 1.3.6.1.4.1.321.100.1.7.2.1.1 | INTEGER | read-only | The index into the PPP PAP association table. |
| STR ipadPPPPAPTableUsername | 1.3.6.1.4.1.321.100.1.7.2.1.2 | DisplayString | read-write | Identification string to identify the user. |
| STR ipadPPPPAPTablePassword | 1.3.6.1.4.1.321.100.1.7.2.1.3 | DisplayString | read-write | Password string to validate the user identity. |
| ipadPPPCHAPTable | 1.3.6.1.4.1.321.100.1.7.3 | not-accessible | Table of CHAP authentication parameters. | |
| ipadPPPCHAPTableEntry | 1.3.6.1.4.1.321.100.1.7.3.1 | not-accessible | An entry in the ipad PPP CHAP table. | |
| INT ipadPPPCHAPTableIndex | 1.3.6.1.4.1.321.100.1.7.3.1.1 | INTEGER | read-only | The index into the PPP CHAP association table. |
| STR ipadPPPCHAPTableUsername | 1.3.6.1.4.1.321.100.1.7.3.1.2 | DisplayString | read-write | Identification string to identify the user. |
| STR ipadPPPCHAPTableSecret | 1.3.6.1.4.1.321.100.1.7.3.1.3 | DisplayString | read-write | Password string to validate the user identity. |
| ipadModem | 1.3.6.1.4.1.321.100.1.8 | |||
| ipadModemDialTable | 1.3.6.1.4.1.321.100.1.8.1 | not-accessible | Table of modem dialing parameters. | |
| ipadModemDialTableEntry | 1.3.6.1.4.1.321.100.1.8.1.1 | not-accessible | An entry in the ipad modem dialing parameters table. | |
| INT ipadModemDialTableIndex | 1.3.6.1.4.1.321.100.1.8.1.1.1 | INTEGER | read-only | The index into the ipad modem dialing parameters table. Equivalent to MIB-II ifIndex. |
| INT ipadModemDialDataIndex | 1.3.6.1.4.1.321.100.1.8.1.1.2 | INTEGER | read-write | An index into the Modem Data Table, which selects a modem. |
| STR ipadModemDialNumber | 1.3.6.1.4.1.321.100.1.8.1.1.3 | DisplayString | read-write | Specifies the telephone number to dial. |
| INT ipadModemDialAbortTimer | 1.3.6.1.4.1.321.100.1.8.1.1.4 | INTEGER | read-write | Aborts a connection attempt if an initialed dial-up connection has failed to connect within the specified number of seconds. Range is 1..255. |
| INT ipadModemDialRedialAttempts | 1.3.6.1.4.1.321.100.1.8.1.1.5 | INTEGER | read-write | Determines how many attempts to initiate a dial-up connection after the initial failure. Range is 0..10. |
| INT ipadModemDialDelayBeforeRedial | 1.3.6.1.4.1.321.100.1.8.1.1.6 | INTEGER | read-write | Specifies the number of seconds to wait before redialing. Range is 1..255. |
| STR ipadModemDialLoginScript | 1.3.6.1.4.1.321.100.1.8.1.1.7 | DisplayString | read-write | Script string interpreted after a dial-up connection is first established. |
| STR ipadModemDialUsername | 1.3.6.1.4.1.321.100.1.8.1.1.8 | DisplayString | read-write | Identification string to determine the user identity. |
| STR ipadModemDialPassword | 1.3.6.1.4.1.321.100.1.8.1.1.9 | DisplayString | read-write | Password string to validate the user identity. |
| ipadModemDataTable | 1.3.6.1.4.1.321.100.1.8.2 | not-accessible | Table of modem database parameters. | |
| ipadModemDataTableEntry | 1.3.6.1.4.1.321.100.1.8.2.1 | not-accessible | An entry in the ipad modem database parameters table. | |
| INT ipadModemDataTableIndex | 1.3.6.1.4.1.321.100.1.8.2.1.1 | INTEGER | read-only | The index into the ipad modem database parameters table. |
| STR ipadModemDataModemName | 1.3.6.1.4.1.321.100.1.8.2.1.2 | DisplayString | read-write | Identification string for the modem database. |
| STR ipadModemDataSetupScript | 1.3.6.1.4.1.321.100.1.8.2.1.3 | DisplayString | read-write | Script interpreted when a modem port is first started. |
| STR ipadModemDataDialingScript | 1.3.6.1.4.1.321.100.1.8.2.1.4 | DisplayString | read-write | Script interpreted when a dial-up connection is initiated. |
| STR ipadModemDataAnswerScript | 1.3.6.1.4.1.321.100.1.8.2.1.5 | DisplayString | read-write | Script interpreted when a modem port is waiting for an incoming call. |
| STR ipadModemDataHangupScript | 1.3.6.1.4.1.321.100.1.8.2.1.6 | DisplayString | read-write | Script interpreted when a dial-up connection is no longer needed. |
| ipadSvcAware | 1.3.6.1.4.1.321.100.1.9 | |||
| ipadFrPortStatsTable | 1.3.6.1.4.1.321.100.1.9.1 | not-accessible | Port statistics. | |
| ipadFrPortStatsEntry | 1.3.6.1.4.1.321.100.1.9.1.1 | not-accessible | An entry in the service aware ports statistics table. | |
| INT ipadFrPortStatsService | 1.3.6.1.4.1.321.100.1.9.1.1.1 | INTEGER | read-only | Port index in the ipadFrPortStats table; an entry in the ipad service table. |
| INT ipadFrPortStatsPeriod | 1.3.6.1.4.1.321.100.1.9.1.1.2 | INTEGER | read-only | The index into the port stats 24-hour table. |
| INT ipadFrPortStatsTxFrames | 1.3.6.1.4.1.321.100.1.9.1.1.3 | INTEGER | read-only | Number of transmitted frames for the period. |
| INT ipadFrPortStatsRxFrames | 1.3.6.1.4.1.321.100.1.9.1.1.4 | INTEGER | read-only | Number of received frames for the period. |
| INT ipadFrPortStatsTxOctets | 1.3.6.1.4.1.321.100.1.9.1.1.5 | INTEGER | read-only | Number of transmitted octets for the period. |
| INT ipadFrPortStatsRxOctets | 1.3.6.1.4.1.321.100.1.9.1.1.6 | INTEGER | read-only | Number of received octets for the period. |
| INT ipadFrPortStatsTxMgmtFrames | 1.3.6.1.4.1.321.100.1.9.1.1.7 | INTEGER | read-only | Number of transmitted management frames for the period. |
| INT ipadFrPortStatsRxMgmtFrames | 1.3.6.1.4.1.321.100.1.9.1.1.8 | INTEGER | read-only | Number of received management frames for the period. |
| INT ipadFrPortStatsTxMgmtOctets | 1.3.6.1.4.1.321.100.1.9.1.1.9 | INTEGER | read-only | Number of transmitted management octets for the period. |
| INT ipadFrPortStatsRxMgmtOctets | 1.3.6.1.4.1.321.100.1.9.1.1.10 | INTEGER | read-only | Number of received management octets for the period. |
| INT ipadFrPortStatsRxFECN | 1.3.6.1.4.1.321.100.1.9.1.1.11 | INTEGER | read-only | Number of received frames with FECN set for the period. |
| INT ipadFrPortStatsRxBECN | 1.3.6.1.4.1.321.100.1.9.1.1.12 | INTEGER | read-only | Number of received frames with BECN set for the period. |
| INT ipadFrPortStatsRxInvalid | 1.3.6.1.4.1.321.100.1.9.1.1.13 | INTEGER | read-only | Number of invalid received frames for the period. |
| INT ipadFrPortStatsTxStatInq | 1.3.6.1.4.1.321.100.1.9.1.1.14 | INTEGER | read-only | Number of transmitted status inquiry frames for the period. |
| INT ipadFrPortStatsRxStatInq | 1.3.6.1.4.1.321.100.1.9.1.1.15 | INTEGER | read-only | Number of received status inquiry frames for the period. |
| INT ipadFrPortStatsTxStatResp | 1.3.6.1.4.1.321.100.1.9.1.1.16 | INTEGER | read-only | Number of transmitted status response frames for the period. |
| INT ipadFrPortStatsRxStatResp | 1.3.6.1.4.1.321.100.1.9.1.1.17 | INTEGER | read-only | Number of received status response frames for the period. |
| INT ipadFrPortStatsRxInvLMI | 1.3.6.1.4.1.321.100.1.9.1.1.18 | INTEGER | read-only | Number of received frames with an invalid LMI for the period. |
| INT ipadFrPortStatsPeak | 1.3.6.1.4.1.321.100.1.9.1.1.19 | INTEGER | read-only | Peak throughput rate for the period (in octets/second). |
| INT ipadFrPortStatsAverage | 1.3.6.1.4.1.321.100.1.9.1.1.20 | INTEGER | read-only | Average throughput rate for the period (in octets/second). |
| ipadDLCIstatsTable | 1.3.6.1.4.1.321.100.1.9.2 | not-accessible | Port statistics. | |
| ipadDLCIstatsEntry | 1.3.6.1.4.1.321.100.1.9.2.1 | not-accessible | An entry in the service aware DLCI statistics table. | |
| INT ipadDLCIstatsService | 1.3.6.1.4.1.321.100.1.9.2.1.1 | INTEGER | read-only | The service index for the service aware stats table; identifies an entry in the ipad DLCI table when combined with ipadDLCIstatsDLCI. |
| INT ipadDLCIstatsDLCI | 1.3.6.1.4.1.321.100.1.9.2.1.2 | INTEGER | read-only | The DLCI index for the service aware stats table; identifies an entry in the ipad DLCI table when combined with ipadDLCIstatsService. |
| INT ipadDLCIstatsPeriod | 1.3.6.1.4.1.321.100.1.9.2.1.3 | INTEGER | read-only | The index into the DLCI stats 24-hour table. |
| INT ipadDLCIstatsTxFrames | 1.3.6.1.4.1.321.100.1.9.2.1.4 | INTEGER | read-only | The number of transmitted frames for the period. |
| INT ipadDLCIstatsRxFrames | 1.3.6.1.4.1.321.100.1.9.2.1.5 | INTEGER | read-only | The number of received frames for the period. |
| INT ipadDLCIstatsTxOctets | 1.3.6.1.4.1.321.100.1.9.2.1.6 | INTEGER | read-only | The number of transmitted octets for the period. |
| INT ipadDLCIstatsRxOctets | 1.3.6.1.4.1.321.100.1.9.2.1.7 | INTEGER | read-only | The number of received octets for the period. |
| INT ipadDLCIstatsRxFECN | 1.3.6.1.4.1.321.100.1.9.2.1.8 | INTEGER | read-only | The number of received frames with FECN set for the period. |
| INT ipadDLCIstatsRxBECN | 1.3.6.1.4.1.321.100.1.9.2.1.9 | INTEGER | read-only | The number of received frames with BECN set for the period. |
| INT ipadDLCIstatsRxDE | 1.3.6.1.4.1.321.100.1.9.2.1.10 | INTEGER | read-only | The number of received frames with DE bit set for the period. |
| INT ipadDLCIstatsTxExcessCIR | 1.3.6.1.4.1.321.100.1.9.2.1.11 | INTEGER | read-only | The number of transmitted octets in excess of CIR for the period. |
| INT ipadDLCIstatsTxExcessBe | 1.3.6.1.4.1.321.100.1.9.2.1.12 | INTEGER | read-only | The number of transmitted octets in excess of Be for the period. |
| INT ipadDLCIstatsTxMgmtFrames | 1.3.6.1.4.1.321.100.1.9.2.1.13 | INTEGER | read-only | The number of transmitted management frames for the period. |
| INT ipadDLCIstatsRxMgmtFrames | 1.3.6.1.4.1.321.100.1.9.2.1.14 | INTEGER | read-only | The number of received management frames for the period. |
| INT ipadDLCIstatsTxMgmtOctets | 1.3.6.1.4.1.321.100.1.9.2.1.15 | INTEGER | read-only | The number of transmitted management octets for the period. |
| INT ipadDLCIstatsRxMgmtOctets | 1.3.6.1.4.1.321.100.1.9.2.1.16 | INTEGER | read-only | The number of received management octets for the period. |
| INT ipadDLCIstatsPeak | 1.3.6.1.4.1.321.100.1.9.2.1.17 | INTEGER | read-only | Peak throughput rate for the period (in octets/second). |
| INT ipadDLCIstatsAverage | 1.3.6.1.4.1.321.100.1.9.2.1.18 | INTEGER | read-only | Average throughput rate for the period (in octets/second). |
| INT ipadDLCIstatsDelayPeak | 1.3.6.1.4.1.321.100.1.9.2.1.19 | INTEGER | read-only | Peak roundtrip delay for the period. |
| INT ipadDLCIstatsDelayAverage | 1.3.6.1.4.1.321.100.1.9.2.1.20 | INTEGER | read-only | Average roundtrip delay for the period. |
| INT ipadDLCIstatsRoundTripTimeouts | 1.3.6.1.4.1.321.100.1.9.2.1.21 | INTEGER | read-only | Number of timeouts on roundtrip delay for the period. |
| INT ipadDLCIstatsUAS | 1.3.6.1.4.1.321.100.1.9.2.1.22 | INTEGER | read-only | Number of seconds the DLCI is unavailable. |
| ipadUserStatsTable | 1.3.6.1.4.1.321.100.1.9.3 | not-accessible | User-selected protocol statistics. | |
| ipadUserStatsEntry | 1.3.6.1.4.1.321.100.1.9.3.1 | not-accessible | An entry in the user statistics table. | |
| INT ipadUserStatsIndex | 1.3.6.1.4.1.321.100.1.9.3.1.1 | INTEGER | read-only | Index into the user statistics table. |
| INT ipadUserStatsPeriod | 1.3.6.1.4.1.321.100.1.9.3.1.2 | INTEGER | read-only | The index into the user stats 24-hour table. |
| INT ipadUserStatsTxFrames | 1.3.6.1.4.1.321.100.1.9.3.1.3 | INTEGER | read-only | Number of transmitted frames for the period. |
| INT ipadUserStatsRxFrames | 1.3.6.1.4.1.321.100.1.9.3.1.4 | INTEGER | read-only | Number of received frames for the period. |
| INT ipadUserStatsTxOctets | 1.3.6.1.4.1.321.100.1.9.3.1.5 | INTEGER | read-only | Number of transmitted octets for the period. |
| INT ipadUserStatsRxOctets | 1.3.6.1.4.1.321.100.1.9.3.1.6 | INTEGER | read-only | Number of received octets for the period. |
| INT ipadUserStatsTxRatePeak | 1.3.6.1.4.1.321.100.1.9.3.1.7 | INTEGER | read-only | Peak throughput rate for the period (in octets/second). |
| INT ipadUserStatsTxRateAverage | 1.3.6.1.4.1.321.100.1.9.3.1.8 | INTEGER | read-only | Average throughput rate for the period (in octets/second). |
| ipadIPTopNStatsTable | 1.3.6.1.4.1.321.100.1.9.4 | not-accessible | IP TopN statistics. | |
| ipadIPTopNStatsEntry | 1.3.6.1.4.1.321.100.1.9.4.1 | not-accessible | An entry in the user statistics table. | |
| INT ipadIPTopNStatsIndex | 1.3.6.1.4.1.321.100.1.9.4.1.1 | INTEGER | read-only | Index into the IP TopN statistics table. |
| OCT ipadIPTopNStatsAddress | 1.3.6.1.4.1.321.100.1.9.4.1.2 | OCTET STRING | read-only | IP address of this entry. |
| TIK ipadIPTopNStatsTimestamp | 1.3.6.1.4.1.321.100.1.9.4.1.3 | TimeTicks | read-only | Time of last IP frame for this entry. |
| INT ipadIPTopNStatsRxFrames | 1.3.6.1.4.1.321.100.1.9.4.1.4 | INTEGER | read-only | Number of received IP frames for this entry. |
| INT ipadIPTopNStatsRxOctets | 1.3.6.1.4.1.321.100.1.9.4.1.5 | INTEGER | read-only | Number of received IP octets for this entry. |
| INT ipadIPTopNStatsTxFrames | 1.3.6.1.4.1.321.100.1.9.4.1.6 | INTEGER | read-only | Number of transmitted IP frames for this entry. |
| INT ipadIPTopNStatsTxOctets | 1.3.6.1.4.1.321.100.1.9.4.1.7 | INTEGER | read-only | Number of transmitted IP octets for this entry. |
| ipadPktSwitch | 1.3.6.1.4.1.321.100.1.10 | |||
| INT ipadPktSwOperatingMode | 1.3.6.1.4.1.321.100.1.10.1 | INTEGER | read-write | Selects overall mode of operation. |
| ipadPktSwCfgTable | 1.3.6.1.4.1.321.100.1.10.2 | not-accessible | The ipad packet switch configuration table. | |
| ipadPktSwCfgTableEntry | 1.3.6.1.4.1.321.100.1.10.2.1 | not-accessible | An entry in the ipad packet switch configuration table. | |
| INT ipadPktSwCfgService | 1.3.6.1.4.1.321.100.1.10.2.1.1 | INTEGER | read-only | The index into the packet switch configuration table; an entry in the ipad Service table. |
| INT ipadPktSwCfgInterfaceType | 1.3.6.1.4.1.321.100.1.10.2.1.2 | INTEGER | read-write | Network ports should be set to User Network Interface (uni) and user ports should be set to Network Interface (ni). |
| INT ipadPktSwCfgLnkMgmtType | 1.3.6.1.4.1.321.100.1.10.2.1.3 | INTEGER | read-write | If set to auto, the frame relay LMI type will be learned from the network side. If set to none, all DLCI must be configured. |
| INT ipadPktSwCfgMaxFrameSize | 1.3.6.1.4.1.321.100.1.10.2.1.4 | INTEGER | read-write | This is the maximum frame size configured in the frame relay network. |
| INT ipadPktSwCfgnN1 | 1.3.6.1.4.1.321.100.1.10.2.1.5 | INTEGER | read-write | Number of keep alive requests between full status request. |
| INT ipadPktSwCfgnN2 | 1.3.6.1.4.1.321.100.1.10.2.1.6 | INTEGER | read-write | Number of errors from FRAD before alarm. |
| INT ipadPktSwCfgnN3 | 1.3.6.1.4.1.321.100.1.10.2.1.7 | INTEGER | read-write | Number of events to sample nN2. |
| INT ipadPktSwCfgnT1 | 1.3.6.1.4.1.321.100.1.10.2.1.8 | INTEGER | read-write | Delay before issuing a poll sequence. |
| INT ipadPktSwCfgDefCIR | 1.3.6.1.4.1.321.100.1.10.2.1.9 | INTEGER | read-write | Default committed information rate in bits per second. |
| INT ipadPktSwCfgDefExBurst | 1.3.6.1.4.1.321.100.1.10.2.1.10 | INTEGER | read-write | Default excess burst rate in bits per second. |
| INT ipadPktSwCfgCIREE | 1.3.6.1.4.1.321.100.1.10.2.1.11 | INTEGER | read-write | Determines if the interface will enforce CIR and excess burst configured values. |
| INT ipadPktSwCfgLinkInjection | 1.3.6.1.4.1.321.100.1.10.2.1.12 | INTEGER | read-write | Indicates how to process frames in excess of the CIR when congestion exists. |
| INT ipadPktSwCfgAutoDiagnostic | 1.3.6.1.4.1.321.100.1.10.2.1.13 | INTEGER | read-write | Determines if the unit will put itself into diagnostic mode everytime it determines that there are no LMI received on a network service. |
| INT ipadPktSwCfgAutoDiscovery | 1.3.6.1.4.1.321.100.1.10.2.1.14 | INTEGER | read-write | Determines if the unit will learn the DLCIs from the LMMI received on this service. |
| INT ipadPktSwCfgMgmtDLCI | 1.3.6.1.4.1.321.100.1.10.2.1.15 | INTEGER | read-write | Specifies the DLCI that will be used by the unit for management information. Specifying a 0 disables this feature. |
| ipadTrapDest | 1.3.6.1.4.1.321.100.1.11 | |||
| ipadTrapDestTable | 1.3.6.1.4.1.321.100.1.11.1 | not-accessible | The ipad trap destination table. | |
| ipadTrapDestTableEntry | 1.3.6.1.4.1.321.100.1.11.1.1 | not-accessible | An entry in the ipad trap destination table. | |
| INT ipadTrapDestIndex | 1.3.6.1.4.1.321.100.1.11.1.1.1 | INTEGER | read-only | Index into the ipad trap destination table. |
| IP ipadTrapDestination | 1.3.6.1.4.1.321.100.1.11.1.1.2 | IpAddress | read-write | Trap destination. |
| ipadMisc | 1.3.6.1.4.1.321.100.1.12 | |||
| ipadMiscPortSettings | 1.3.6.1.4.1.321.100.1.12.1 | not-accessible | The ipad miscellaneous port settings table. | |
| ipadMiscPortSettingsEntry | 1.3.6.1.4.1.321.100.1.12.1.1 | not-accessible | An entry in the ipad miscellaneous port settings table. | |
| INT ipadMiscPortSettingsIndex | 1.3.6.1.4.1.321.100.1.12.1.1.1 | INTEGER | read-only | The MIB-II ifIndex for this port. |
| INT ipadMiscPortSettingsSerialType | 1.3.6.1.4.1.321.100.1.12.1.1.2 | INTEGER | read-write | The type of this serial port. |
| INT ipadMiscClearStatusCounts | 1.3.6.1.4.1.321.100.1.12.2 | INTEGER | read-write | Writing a 2 to this field will clear all status counts. |
| ipadRouter | 1.3.6.1.4.1.321.100.1.13 | |||
| ipadSoftKey | 1.3.6.1.4.1.321.100.1.14 | |||
| ipadSoftKeyTable | 1.3.6.1.4.1.321.100.1.14.1 | not-accessible | Table of software keys. | |
| ipadSoftKeyTableEntry | 1.3.6.1.4.1.321.100.1.14.1.1 | not-accessible | An entry in the software key table. | |
| INT ipadSoftKeyIndex | 1.3.6.1.4.1.321.100.1.14.1.1.1 | INTEGER | read-only | Index into the ipad software key table. |
| STR ipadSoftKeyAcronym | 1.3.6.1.4.1.321.100.1.14.1.1.2 | DisplayString | read-only | Three-letter acronym for software key. |
| STR ipadSoftKeyDescription | 1.3.6.1.4.1.321.100.1.14.1.1.3 | DisplayString | read-only | Description, if available, of this software key. |
| STR ipadSoftKeyExpirationDate | 1.3.6.1.4.1.321.100.1.14.1.1.4 | DisplayString | read-only | Expiration date of this software key in the format YY/MM/DD. |
| STR ipadSoftKeyEntry | 1.3.6.1.4.1.321.100.1.14.2 | DisplayString | read-write | Writing a software key will enable that feature (assuming a correct and valid key is entered). |
RFC description
Manages frame relay ports, PPP, modem, and routing configuration for IPAD systems.
Start monitoring Verilink IPAD Integrated Access Device (Frame Relay WAN port) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.