IMCO-LS110-MIB

All MIBs › IMCO-LS110-MIB

Organization: ViaNet.sk

Last Updated: 2017-02-09

Category: Device Management

Description: ViaNet.sk MIB for the IMCO LS110 device providing local status and configuration management for this network appliance.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is IMCO-LS110-MIB?

IMCO-LS110-MIB is a vendor-specific MIB from ViaNet.sk for the IMCO LS110 device, describing a PSMSmicro-based SDS unit that provides environmental and power monitoring for network/telecom cabinets. It exposes environmental sensor data (temperature readings and names, discrete opto inputs), power output voltages, relay/alarm states, and free-text alarm descriptions. Its central purpose is hardware status monitoring: cabinet temperature, DC output voltage levels, maximum load threshold, and alarm relay states directly reflect the physical health of powered equipment in the site. No dependency on other standard MIBs is evident - this is a self-contained private enterprise MIB. It is typically deployed as a small supervisory/telemetry unit in telecom or network equipment cabinets at remote sites, alerting operators to power or temperature excursions. Engineers can download the IMCO-LS110-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in IMCO-LS110-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ViaNet.sk IMCO LS110 environmental/power monitoring unit
telecom cabinet remote monitoring appliance

Monitoring Examples

An operator polls sdsTempSensValue alongside sdsTempSensName to track cabinet temperature per named sensor, and sdsOutputVoltage1/sdsOutputVoltage2 to confirm DC power rails stay within range. sdsAlarmText combined with sdsRE1state/sdsRE2state/sdsRE3state relay states shows which alarm relay has tripped, while opto1/opto2/opto3 digital inputs and sdsMaximumLoad reveal an over-temperature or over-load condition that triggered the alarm.

What Can Be Monitored

cabinet/environment temperature
output voltage levels
alarm relay/state status
digital opto input status
maximum load threshold
alarm text/description

Imported Objects

From RFC-1215

TRAP-TYPE

From SNMPv2-SMI

Counter32
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks
enterprises

How to Use in IPNetwork Monitor

Example using sdsTempSensValue OID:

Select a ViaNet.sk environmental/power monitoring unit as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type sdsTempSensValue into the Find box to locate it in the OID tree, then select it and click OK. It reports the temperature Sensor (C) multiplied by 100. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Gauge32-type OID, Value bounds is the most useful condition here — trigger an alert if the reported value exceeds the level expected for healthy operation, since sustained high temperature often precedes thermal shutdown or hardware degradation. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
mib_AN_Dcz_SDS	1.3.6.1.4.1.33283			The MIB module to describe PSMSmicro version of SDS.
NTF opto1_trap	1.3.6.1.4.1.33283.0.100			TRAP: optical input 1 status.
NTF opto2_trap	1.3.6.1.4.1.33283.0.101			TRAP: optical input 2 status.
NTF opto3_trap	1.3.6.1.4.1.33283.0.102			TRAP: optical input 3 status.
NTF sdsRE1state_trap	1.3.6.1.4.1.33283.0.150			TRAP: Current RELAY 1 output status.
NTF sdsRE2state_trap	1.3.6.1.4.1.33283.0.153			TRAP: Current RELAY 2 output status.
NTF sdsTempSensValue_trap	1.3.6.1.4.1.33283.0.222			TRAP: Temperature Sensor (C) multiplied by 100.
NTF sdsTempSensName_trap	1.3.6.1.4.1.33283.0.223			TRAP: User name for analog temperature sensor.
NTF sdsMaximumLoad_trap	1.3.6.1.4.1.33283.0.401			TRAP: SDS Maximum Load-trap.
NTF sdsAlarmText_trap	1.3.6.1.4.1.33283.0.402			TRAP: SDS Alarm Text.
NTF sdsOutputVoltage1_trap	1.3.6.1.4.1.33283.0.403			TRAP: SDS Output Voltage1-trap.
NTF sdsOutputVoltage2_trap	1.3.6.1.4.1.33283.0.404			TRAP: SDS Outpur Voltage2-trap.
NTF sdsOutputCurrent_trap	1.3.6.1.4.1.33283.0.405			TRAP: SDS Output current-trap.
NTF sdsBatteryCapacity_trap	1.3.6.1.4.1.33283.0.406			TRAP: SDS Battery Capacity-trap.
NTF sdsLoad_trap	1.3.6.1.4.1.33283.0.407			TRAP: SDS Load-trap.
NTF sdsCapTestTime_trap	1.3.6.1.4.1.33283.0.408			TRAP: SDS CapTestTime-trap.
sdsxpublic	1.3.6.1.4.1.33283.1
sdsBIGandSTSW	1.3.6.1.4.1.33283.1.30
sdsOptoInput	1.3.6.1.4.1.33283.1.30.2
INT opto1	1.3.6.1.4.1.33283.1.30.2.1	INTEGER	read-only	Current OPTO1 binary input status.
INT opto2	1.3.6.1.4.1.33283.1.30.2.2	INTEGER	read-only	Current OPTO2 binary input status.
INT opto3	1.3.6.1.4.1.33283.1.30.2.3	INTEGER	read-only	Current Mains (OPTO3) binary input status.
sdsOutputRelays	1.3.6.1.4.1.33283.1.30.3
sdsOutputRelay1	1.3.6.1.4.1.33283.1.30.3.1
INT sdsRE1state	1.3.6.1.4.1.33283.1.30.3.1.1	INTEGER	read-write	Current RELAY 1 output status.
sdsOutputRelay2	1.3.6.1.4.1.33283.1.30.3.2
INT sdsRE2state	1.3.6.1.4.1.33283.1.30.3.2.1	INTEGER	read-write	Current RELAY 2 output status.
sdsOutputRelay3	1.3.6.1.4.1.33283.1.30.3.3
INT sdsRE3state	1.3.6.1.4.1.33283.1.30.3.3.1	INTEGER	read-write	Current RELAY 3 output status.
sdsADCinputs	1.3.6.1.4.1.33283.1.30.5
sdsADCitem0	1.3.6.1.4.1.33283.1.30.5.1
G32 sdsTempSensValueEx	1.3.6.1.4.1.33283.1.30.5.1.3	Gauge32	read-only	Temperature Sensor (C) multiplied by 100.
OCT sdsTempSensName	1.3.6.1.4.1.33283.1.30.5.1.4	OCTET STRING	read-only	User name for the analog temperature sensor.
sdsADCvalues	1.3.6.1.4.1.33283.1.30.7
I32 sdsMaximumLoad	1.3.6.1.4.1.33283.1.30.7.2	Integer32	read-only	Maximum Load (W) multiplied by 10.
OCT sdsAlarmText	1.3.6.1.4.1.33283.1.30.7.3	OCTET STRING	read-only	SDS Alarm Text.
I32 sdsOutputVoltage1	1.3.6.1.4.1.33283.1.30.7.4	Integer32	read-only	Output voltage U1 (V) multiplied by 100.
I32 sdsOutputVoltage2	1.3.6.1.4.1.33283.1.30.7.5	Integer32	read-only	Output voltage U2 (V) multiplied by 100.
I32 sdsOutputCurrent	1.3.6.1.4.1.33283.1.30.7.6	Integer32	read-only	Output current I (A) multiplied by 10.
I32 sdsBatteryCapacity	1.3.6.1.4.1.33283.1.30.7.7	Integer32	read-only	Battery Capacity (%) multiplied by 10.
I32 sdsLoad	1.3.6.1.4.1.33283.1.30.7.8	Integer32	read-only	Load (%) multiplied by 10.
I32 sdsCapTestTime	1.3.6.1.4.1.33283.1.30.7.9	Integer32	read-only	Time (min) of last Capacity Test.
sdsGeneralInfoEntry	1.3.6.1.4.1.33283.1.30.8
OCT sdsManufacturer	1.3.6.1.4.1.33283.1.30.8.80	OCTET STRING	read-only	Manufacturer of the device.
OCT sdsModel	1.3.6.1.4.1.33283.1.30.8.81	OCTET STRING	read-only	Model (type) of the device.
OCT sdsName	1.3.6.1.4.1.33283.1.30.8.82	OCTET STRING	read-only	Name/Location of the device.
OCT sdsSerialNumber	1.3.6.1.4.1.33283.1.30.8.83	OCTET STRING	read-only	Serial number of the device.
OCT sdsSoftware	1.3.6.1.4.1.33283.1.30.8.84	OCTET STRING	read-only	Software version of the device.

RFC description

Vendor-private MIB for IMCO LS110 devices; management information for network storage or communication equipment.

Start monitoring ViaNet.sk environmental/power monitoring units with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download IMCO-LS110-MIB