All MIBs › IMCO-LS110-MIB › sdsRE2state
sdsRE2state
Module: IMCO-LS110-MIB
OID (symbolic): IMCO-LS110-MIB::sdsRE2state
OID (numeric): 1.3.6.1.4.1.33283.1.30.3.2.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Current RELAY 2 output status.
What is sdsRE2state?
Read/write state of output relay 2: off(0) or activated(255), controlled and read the same way as sdsRE1state but for the second independent relay output.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.33283.1.30.3.2.1 snmpwalk -v2c -c public <target> IMCO-LS110-MIB::sdsRE2state
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.33283.1.30.3.2.1.1 snmpget -v2c -c public <target> IMCO-LS110-MIB::sdsRE2state.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.33283.1.30.3.2.1.1 i <value>
Start monitoring ViaNet.sk environmental/power monitoring units with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IMCO-LS110-MIB::sdsRE2state OID value, configure state conditions and alerts, and monitor any ViaNet.sk environmental/power monitoring units from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.33283 | mib_AN_Dcz_SDS | IMCO-LS110-MIB |
| 1.3.6.1.4.1.33283.1 | sdsxpublic | IMCO-LS110-MIB |
| 1.3.6.1.4.1.33283.1.30 | sdsBIGandSTSW | IMCO-LS110-MIB |
| 1.3.6.1.4.1.33283.1.30.3 | sdsOutputRelays | IMCO-LS110-MIB |
| 1.3.6.1.4.1.33283.1.30.3.2 | sdsOutputRelay2 | IMCO-LS110-MIB |
| 1.3.6.1.4.1.33283.1.30.3.2.1 | sdsRE2state | IMCO-LS110-MIB |