All MIBs › IMCO-LS110-MIB › sdsRE1state
sdsRE1state
Module: IMCO-LS110-MIB
OID (symbolic): IMCO-LS110-MIB::sdsRE1state
OID (numeric): 1.3.6.1.4.1.33283.1.30.3.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Current RELAY 1 output status.
What is sdsRE1state?
Read/write state of output relay 1: off(0) or activated(255). Set this to activated to energize the relay (e.g. to trigger a siren or auxiliary device) and read it back to confirm the switch took effect.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.33283.1.30.3.1.1 snmpwalk -v2c -c public <target> IMCO-LS110-MIB::sdsRE1state
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.33283.1.30.3.1.1.1 snmpget -v2c -c public <target> IMCO-LS110-MIB::sdsRE1state.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.33283.1.30.3.1.1.1 i <value>
Start monitoring ViaNet.sk environmental/power monitoring units with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IMCO-LS110-MIB::sdsRE1state OID value, configure state conditions and alerts, and monitor any ViaNet.sk environmental/power monitoring units from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.33283 | mib_AN_Dcz_SDS | IMCO-LS110-MIB |
| 1.3.6.1.4.1.33283.1 | sdsxpublic | IMCO-LS110-MIB |
| 1.3.6.1.4.1.33283.1.30 | sdsBIGandSTSW | IMCO-LS110-MIB |
| 1.3.6.1.4.1.33283.1.30.3 | sdsOutputRelays | IMCO-LS110-MIB |
| 1.3.6.1.4.1.33283.1.30.3.1 | sdsOutputRelay1 | IMCO-LS110-MIB |
| 1.3.6.1.4.1.33283.1.30.3.1.1 | sdsRE1state | IMCO-LS110-MIB |