IEEE8023-DOT3-LLDP-EXT-V2-MIB

All MIBs › IEEE8023-DOT3-LLDP-EXT-V2-MIB

Organization: IEEE 802.3 Working Group

Last Updated: 2013-04-11

Category: Protocol: LLDP, Standard: IEEE 802

Description: IEEE 802.3 MIB for LLDP extensions providing IEEE 802.3-specific TLVs including MAC/PHY configuration and EEE information.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is IEEE8023-DOT3-LLDP-EXT-V2-MIB?

IEEE8023-DOT3-LLDP-EXT-V2-MIB is a vendor-neutral IEEE 802.3 standards extension to the Link Layer Discovery Protocol version 2 (LLDPv2) MIB, defining organizationally-specific TLVs for Ethernet physical-layer discovery. It belongs to the networking/Ethernet interface management space, extending core LLDP with 802.3-specific attributes such as auto-negotiation capability, operational MAU type, and Power-via-MDI (PoE) power-class details. It exposes per-port configuration data (which 802.3 TLVs are enabled for transmission), local physical-layer port data, and power-class data useful for verifying link-partner compatibility. Administrators use it primarily to monitor hardware link status - auto-negotiation state, advertised versus operational speed/duplex capability, MAU type, and PoE power class - to detect mismatched or misconfigured Ethernet links. It depends on the base LLDP-MIB/LLDP-V2-MIB framework for indexing and general discovery objects, and is typically deployed on managed Ethernet switches and network interface cards across multi-vendor environments. Engineers implementing or auditing this functionality typically reference the IEEE8023-DOT3-LLDP-EXT-V2-MIB RFC/standard documentation for the authoritative specification.

IPNetwork Monitor allows you to monitor SNMP objects defined in IEEE8023-DOT3-LLDP-EXT-V2-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

managed Ethernet switch
network interface card
vendor-neutral, standards-based MIB, not tied to a specific manufacturer

Monitoring Examples

An administrator can poll lldpV2Xdot3LocPortAutoNegSupported and lldpV2Xdot3LocPortAutoNegEnabled alongside lldpV2Xdot3LocPortAutoNegAdvertisedCap in the lldpV2Xdot3LocPortTable to confirm a switch port's auto-negotiation settings match its link partner's, and lldpV2Xdot3LocPortOperMauType to check operational speed/duplex. Cross-referencing lldpV2Xdot3PortConfigTLVsTxEnable in lldpV2Xdot3PortConfigTable shows which 802.3 TLVs are advertised per port. The lldpV2Xdot3LocPowerTable's lldpV2Xdot3LocPowerPortClass reveals PoE power class, letting an admin spot a port drawing an unexpected power class - a sign of a misidentified or faulty powered device.

What Can Be Monitored

auto-negotiation support/enabled state
advertised auto-negotiation capabilities
operational MAU type
PoE power class
per-port 802.3 TLV transmit configuration

Imported Objects

From IF-MIB

ifGeneralInformationGroup

OBJECT-GROUP

From LLDP-V2-MIB

lldpV2LocPortIfIndex	OBJECT-TYPE
lldpV2PortConfigEntry	OBJECT-TYPE
lldpV2RemIndex	OBJECT-TYPE
lldpV2RemLocalDestMACAddress	OBJECT-TYPE
lldpV2RemLocalIfIndex	OBJECT-TYPE
lldpV2RemTimeMark	OBJECT-TYPE

From LLDP-V2-TC-MIB

LldpV2PowerPortClass

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32
org

From SNMPv2-TC

TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
ieee8023lldpV2Xdot3MIB	1.3.111.2.802.3.1.5			The LLDP Management Information Base extension module for IEEE 802.3 organizationally defined discovery information.
lldpV2Xdot3Objects	1.3.111.2.802.3.1.5.1
lldpV2Xdot3Config	1.3.111.2.802.3.1.5.1.1
lldpV2Xdot3PortConfigTable	1.3.111.2.802.3.1.5.1.1.1		not-accessible	A table that controls selection of LLDP TLVs to be transmitted on individual ports.
lldpV2Xdot3PortConfigEntry	1.3.111.2.802.3.1.5.1.1.1.1		not-accessible	LLDP configuration information that controls the transmission of IEEE 802.3 organizationally defined TLVs on LLDP transmission capable ports. This configuration object augments the lldpV2PortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpV2PortConfigEntry entry. Each active lldpV2Xdot3PortConfigEntry is restored from non-volatile storage (along with the corresponding lldpV2PortConfigEntry) after a re-initialization of the management system.
BIT lldpV2Xdot3PortConfigTLVsTxEnable	1.3.111.2.802.3.1.5.1.1.1.1.1	Bits	read-write	The lldpV2Xdot3PortConfigTLVsTxEnable, defined as a bitmap, includes the IEEE 802.3 organizationally defined set of LLDP TLVs whose transmission is allowed by the local LLDP agent by the network management. Each bit in the bitmap corresponds to an IEEE 802.3 subtype associated with a specific IEEE 802.3 optional TLV. The bit 'macPhyConfigStatus(0)' indicates that the LLDP agent should transmit 'MAC/PHY configuration/status TLV'. The bit 'powerViaMDI(1)' indicates that the LLDP agent should transmit 'Power via MDI TLV'. The bit 'unused(2)' is no longer used; this was used for the 'Link Aggregation TLV' in the previous version. The bit 'maxFrameSize(3)' indicates that the LLDP agent should transmit 'Maximum-frame-size TLV'. The default value for lldpV2Xdot3PortConfigTLVsTxEnable object is an empty set, which means no enumerated values are set. The value of this object is restored from non-volatile storage after a re-initialization of the management system.
lldpV2Xdot3LocalData	1.3.111.2.802.3.1.5.1.2
lldpV2Xdot3LocPortTable	1.3.111.2.802.3.1.5.1.2.1		not-accessible	This table contains one row per port of Ethernet port information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent.
lldpV2Xdot3LocPortEntry	1.3.111.2.802.3.1.5.1.2.1.1		not-accessible	Information about a particular port component.
T/F lldpV2Xdot3LocPortAutoNegSupported	1.3.111.2.802.3.1.5.1.2.1.1.1	TruthValue	read-only	The truth value used to indicate whether the given port (associated with the local system) supports Auto-negotiation.
T/F lldpV2Xdot3LocPortAutoNegEnabled	1.3.111.2.802.3.1.5.1.2.1.1.2	TruthValue	read-only	The truth value used to indicate whether port Auto-negotiation is enabled on the given port associated with the local system.
OCT lldpV2Xdot3LocPortAutoNegAdvertisedCap	1.3.111.2.802.3.1.5.1.2.1.1.3	OCTET STRING	read-only	This object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the local system.
U32 lldpV2Xdot3LocPortOperMauType	1.3.111.2.802.3.1.5.1.2.1.1.4	Unsigned32	read-only	An integer value that indicates the operational MAU type of the given port on the local system. This object contains the integer value derived from the list position of the corresponding dot3MauType as listed in Clause 13 and is equal to the last number in the respective dot3MauType OID. For example, if the ifMauType object is dot3MauType1000BaseTHD which corresponds to {dot3MauType 29}, the numerical value of this field is 29. For MAU types not listed in Clause 13, the value of this field shall be set to zero.
lldpV2Xdot3LocPowerTable	1.3.111.2.802.3.1.5.1.2.2		not-accessible	This table contains one row per port of power Ethernet information (as a part of the LLDP IEEE 802.3 organizational extension) on the local system known to this agent.
lldpV2Xdot3LocPowerEntry	1.3.111.2.802.3.1.5.1.2.2.1		not-accessible	Information about a particular port component.
LLD lldpV2Xdot3LocPowerPortClass	1.3.111.2.802.3.1.5.1.2.2.1.1	LldpV2PowerPortClass	read-only	The value that identifies the port Class of the given port associated with the local system.
T/F lldpV2Xdot3LocPowerMDISupported	1.3.111.2.802.3.1.5.1.2.2.1.2	TruthValue	read-only	The truth value used to indicate whether the MDI power is supported on the given port associated with the local system.
T/F lldpV2Xdot3LocPowerMDIEnabled	1.3.111.2.802.3.1.5.1.2.2.1.3	TruthValue	read-only	The truth value used to identify whether MDI power is enabled on the given port associated with the local system.
T/F lldpV2Xdot3LocPowerPairControlable	1.3.111.2.802.3.1.5.1.2.2.1.4	TruthValue	read-only	The truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in Clause 8) and is used to indicate whether the pair selection can be controlled on the given port associated with the local system.
U32 lldpV2Xdot3LocPowerPairs	1.3.111.2.802.3.1.5.1.2.2.1.5	Unsigned32	read-only	This object contains the value of the pethPsePortPowerPairs object (defined in Clause 8) which is associated with the given port on the local system.
U32 lldpV2Xdot3LocPowerClass	1.3.111.2.802.3.1.5.1.2.2.1.6	Unsigned32	read-only	This object contains the value of the pethPsePortPowerClassifications object (defined in Clause 8) which is associated with the given port on the local system.
INT lldpV2Xdot3LocPowerType	1.3.111.2.802.3.1.5.1.2.2.1.7	INTEGER	read-only	A GET returns an integer indicating whether the local system is a PSE or a PD and whether it is Type 1 or Type 2.
INT lldpV2Xdot3LocPowerSource	1.3.111.2.802.3.1.5.1.2.2.1.8	INTEGER	read-only	A GET returns an integer indicating the power sources of the local system. A PSE indicates whether it is being powered by a primary power source; a backup power source; or unknown. A PD indicates whether it is being powered by a PSE and locally; by a PSE only; or unknown.
INT lldpV2Xdot3LocPowerPriority	1.3.111.2.802.3.1.5.1.2.2.1.9	INTEGER	read-write	A GET returns the priority of a PD system. For a PSE, this is the priority that the PSE assigns to the PD. For a PD, this is the priority that the PD requests from the PSE. A SET operation changes the priority of the PD system to the indicated value.
I32 lldpV2Xdot3LocPDRequestedPowerValue	1.3.111.2.802.3.1.5.1.2.2.1.10	Integer32	read-only	A GET returns the PD requested power value. For a PD, it is the power value that the PD has currently requested from the remote system. PD requested power value is the maximum input average power the PD ever draws under this power allocation if accepted. For a PSE, it is the power value that the PSE mirrors back to the remote system. This is the PD requested power value that was used by the PSE to compute the power it has currently allocated to the remote system. The PD requested power value is encoded according to IEEE Std 802.3 Equation (79?1), where X is the decimal value of aLldpXdot3LocPDRequestedPowerValue.
I32 lldpV2Xdot3LocPSEAllocatedPowerValue	1.3.111.2.802.3.1.5.1.2.2.1.11	Integer32	read-only	A GET returns the PSE allocated power value. For a PSE, it is the power value that the PSE has currently allocated to the remote system. The PSE allocated power value is the maximum input average power that the PSE wants the PD to ever draw under this allocation if it is accepted. For a PD, it is the power value that the PD mirrors back to the remote system. This is the PSE allocated power value that was used by the PD to compute the power that it has currently requested from the remote system. The PSE allocated power value is encoded according to IEEE Std 802.3 Equation (79?2), where X is the decimal value of aLldpXdot3LocPSEAllocatedPowerValue.
I32 lldpV2Xdot3LocResponseTime	1.3.111.2.802.3.1.5.1.2.2.1.12	Integer32	read-only	A GET returns the response time in seconds of the local system. For a PD, it is the maximum time required to update the value of lldpV2Xdot3LocPDRequestedPowerValue when the remote system requests the PD to change its max power draw. For a PSE, it is the maximum time required to update the value of lldpV2Xdot3LocPDRequestedPowerValue when the remote system requests of the PSE a new power value.
T/F lldpV2Xdot3LocReady	1.3.111.2.802.3.1.5.1.2.2.1.13	TruthValue	read-only	The truth value used to identify whether the local Data Link Layer classification engine has completed initialization and is ready to receive and transmit LLDPDUs.
I32 lldpV2Xdot3LocReducedOperationPowerValue	1.3.111.2.802.3.1.5.1.2.2.1.14	Integer32	read-only	A GET returns the reduced operation power value. For a PD, it is a power value that is lower than the currently requested power value. This reduced operation power value represents a power state in which the PD could continue to operate, but with less functionality than at the current PD requested power value. The PSE could optionally use this information in the event that the PSE subsequently requests a lower PD power value than the PD requested power value. For a PSE, it is a power value that the PSE could ask the PD to move to if the PSE wants the PD to move to a lower power state. The definition and encoding of PD requested power value is the same as described in lldpV2Xdot3LocPDRequestedPowerValue. The default value for this field is the hexadecimal value FFFF
lldpV2Xdot3LocMaxFrameSizeTable	1.3.111.2.802.3.1.5.1.2.3		not-accessible	This table contains one row per port of maximum frame size information (as a part of the LLDP IEEE 802.3 organizational extension) on the local system known to this agent.
lldpV2Xdot3LocMaxFrameSizeEntry	1.3.111.2.802.3.1.5.1.2.3.1		not-accessible	Maximum Frame Size information about a particular port component.
U32 lldpV2Xdot3LocMaxFrameSize	1.3.111.2.802.3.1.5.1.2.3.1.1	Unsigned32	read-only	An integer value indicating the maximum supported frame size in octets on the given port of the local system.
lldpV2Xdot3LocEEETable	1.3.111.2.802.3.1.5.1.2.4		not-accessible	This table contains one row per port of Energy Efficient Ethernet information (as a part of the LLDP IEEE 802.3 organizational extension) on the local system known to this agent.
lldpV2Xdot3LocEEEEntry	1.3.111.2.802.3.1.5.1.2.4.1		not-accessible	Information about a particular port component.
I32 lldpV2Xdot3LocTxTwSys	1.3.111.2.802.3.1.5.1.2.4.1.1	Integer32	read-only	A GET returns the value of Tw_sys_tx that the local system can support in the transmit direction. This object maps to the variable LocTxSystemValue as defined in IEEE Std 802.3 78.4.2.3.
I32 lldpV2Xdot3LocTxTwSysEcho	1.3.111.2.802.3.1.5.1.2.4.1.2	Integer32	read-only	A GET returns the value of Tw_sys_tx that the remote system is advertising that it can support in the transmit direction and is echoed by the local system under the control of the EEE DLL receiver state diagram. This object maps to the variable LocTxSystemValueEcho as defined in IEEE Std 802.3 78.4.2.3
I32 lldpV2Xdot3LocRxTwSys	1.3.111.2.802.3.1.5.1.2.4.1.3	Integer32	read-only	A GET returns the value of Tw_sys_tx that the local system is requesting in the receive direction. This object maps to the variable LocRxSystemValue as defined in IEEE Std 802.3 78.4.2.3.
I32 lldpV2Xdot3LocRxTwSysEcho	1.3.111.2.802.3.1.5.1.2.4.1.4	Integer32	read-only	A GET returns the value of Tw_sys_tx that the remote system is advertising that it is requesting in the receive direction and is echoed by the local system under the control of the EEE DLL transmitter state diagram. This object maps to the variable LocRxSystemValueEcho as defined in IEEE Std 802.3 78.4.2.3.
I32 lldpV2Xdot3LocFbTwSys	1.3.111.2.802.3.1.5.1.2.4.1.5	Integer32	read-only	A GET returns the value of the fallback Tw_sys_tx that the local system is advertising to the remote system. This object maps to the variable LocFbSystemValue as defined in IEEE Std 802.3 78.4.2.3.
T/F lldpV2Xdot3TxDllReady	1.3.111.2.802.3.1.5.1.2.4.1.6	TruthValue	read-only	The truth value used to identify whether the local Data Link Layer EEE layer management function has completed initialization and is ready to receive and transmit LLDPDUs.
T/F lldpV2Xdot3RxDllReady	1.3.111.2.802.3.1.5.1.2.4.1.7	TruthValue	read-only	The truth value used to identify whether the local Data Link Layer EEE layer management function has completed initialization and is ready to receive and transmit LLDPDUs.
T/F lldpV2Xdot3LocDllEnabled	1.3.111.2.802.3.1.5.1.2.4.1.8	TruthValue	read-only	The truth value used to identify whether the local system has completed auto-negotiation with a link partner that has indicated at leat one EEE capability.
lldpV2Xdot3RemoteData	1.3.111.2.802.3.1.5.1.3
lldpV2Xdot3RemPortTable	1.3.111.2.802.3.1.5.1.3.1		not-accessible	This table contains Ethernet port information (as a part of the LLDP IEEE 802.3 organizational extension) of the remote system.
lldpV2Xdot3RemPortEntry	1.3.111.2.802.3.1.5.1.3.1.1		not-accessible	Information about a particular physical network connection.
T/F lldpV2Xdot3RemPortAutoNegSupported	1.3.111.2.802.3.1.5.1.3.1.1.1	TruthValue	read-only	The truth value used to indicate whether the given port (associated with remote system) supports Auto-negotiation.
T/F lldpV2Xdot3RemPortAutoNegEnabled	1.3.111.2.802.3.1.5.1.3.1.1.2	TruthValue	read-only	The truth value used to indicate whether port Auto-negotiation is enabled on the given port associated with the remote system.
OCT lldpV2Xdot3RemPortAutoNegAdvertisedCap	1.3.111.2.802.3.1.5.1.3.1.1.3	OCTET STRING	read-only	This object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the remote system.
U32 lldpV2Xdot3RemPortOperMauType	1.3.111.2.802.3.1.5.1.3.1.1.4	Unsigned32	read-only	An integer value that indicates the operational MAU type of the sending device. This object contains the integer value derived from the list position of the corresponding dot3MauType as listed in in Clause 13 and is equal to the last number in the respective dot3MauType OID. For example, if the ifMauType object is dot3MauType1000BaseTHD which corresponds to {dot3MauType 29}, the numerical value of this field is 29. For MAU types not listed in Clause 13, the value of this field shall be set to zero.
lldpV2Xdot3RemPowerTable	1.3.111.2.802.3.1.5.1.3.2		not-accessible	This table contains Ethernet power information (as a part of the LLDP IEEE 802.3 organizational extension) of the remote system.
lldpV2Xdot3RemPowerEntry	1.3.111.2.802.3.1.5.1.3.2.1		not-accessible	Information about a particular physical network connection.
LLD lldpV2Xdot3RemPowerPortClass	1.3.111.2.802.3.1.5.1.3.2.1.1	LldpV2PowerPortClass	read-only	The value that identifies the port Class of the given port associated with the remote system.
T/F lldpV2Xdot3RemPowerMDISupported	1.3.111.2.802.3.1.5.1.3.2.1.2	TruthValue	read-only	The truth value used to indicate whether the MDI power is supported on the given port associated with the remote system.
T/F lldpV2Xdot3RemPowerMDIEnabled	1.3.111.2.802.3.1.5.1.3.2.1.3	TruthValue	read-only	The truth value used to identify whether MDI power is enabled on the given port associated with the remote system.
T/F lldpV2Xdot3RemPowerPairControlable	1.3.111.2.802.3.1.5.1.3.2.1.4	TruthValue	read-only	The truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in Clause 8) and is used to indicate whether the pair selection can be controlled on the given port associated with the remote system.
U32 lldpV2Xdot3RemPowerPairs	1.3.111.2.802.3.1.5.1.3.2.1.5	Unsigned32	read-only	This object contains the value of the pethPsePortPowerPairs object (defined in Clause 8) which is associated with the given port on the remote system.
U32 lldpV2Xdot3RemPowerClass	1.3.111.2.802.3.1.5.1.3.2.1.6	Unsigned32	read-only	This object contains the value of the pethPsePortPowerClassifications object (defined in Clause 8) which is associated with the given port on the remote system.
INT lldpV2Xdot3RemPowerType	1.3.111.2.802.3.1.5.1.3.2.1.7	INTEGER	read-only	A GET returns an integer indicating whether the remote system is a PSE or a PD and whether it is Type 1 or Type 2.
INT lldpV2Xdot3RemPowerSource	1.3.111.2.802.3.1.5.1.3.2.1.8	INTEGER	read-only	A GET returns an integer indicating the power sources of the remote system. When the remote system is a PSE, it indicates whether it is being powered by a primary power source; a backup power source; or unknown. When the remote system is a PD, it indicates whether it is being powered by a PSE and locally; locally only; by a PSE only; or unknown.
INT lldpV2Xdot3RemPowerPriority	1.3.111.2.802.3.1.5.1.3.2.1.9	INTEGER	read-write	A GET returns the priority of a PD system. For a PSE, this is the priority that the remote system requests. For a PD, this is the priority that the remote system has assigned.
I32 lldpV2Xdot3RemPDRequestedPowerValue	1.3.111.2.802.3.1.5.1.3.2.1.10	Integer32	read-only	A GET returns the PD requested power value that was used by the remote system to compute the power value that is has currently allocated to the PD. For a PSE, it is the PD requested power value received from the remote system. The definition and encoding of PD requested power value is the same as described in lldpV2Xdot3LocPDRequestedPowerValue.
I32 lldpV2Xdot3RemPSEAllocatedPowerValue	1.3.111.2.802.3.1.5.1.3.2.1.11	Integer32	read-only	A GET returns the PSE allocated power value received from the remote system. For a PSE, it is the PSE allocated power value that was used by the remote system to compute the power value that it has currently requested from the PSE. For a PD, it is the PSE allocated power value received from the remote system. The definition and encoding of PSE allocated power value is the same as described in lldpV2Xdot3LocPSEAllocatedPowerValue.
lldpV2Xdot3RemMaxFrameSizeTable	1.3.111.2.802.3.1.5.1.3.3		not-accessible	This table contains one row per port/destination address pair of maximum frame size information (as a part of the LLDP IEEE 802.3 organizational extension) of the remote system.
lldpV2Xdot3RemMaxFrameSizeEntry	1.3.111.2.802.3.1.5.1.3.3.1		not-accessible	Maximum Frame Size information about a particular port component.
U32 lldpV2Xdot3RemMaxFrameSize	1.3.111.2.802.3.1.5.1.3.3.1.1	Unsigned32	read-only	An integer value indicating the maximum supported frame size in octets on the port component associated with the remote system.
lldpV2Xdot3RemEEETable	1.3.111.2.802.3.1.5.1.3.4		not-accessible	This table contains one row per port of Energy Efficient Ethernet information (as a part of the LLDP IEEE 802.3 organizational extension) on the local system known to this agent.
lldpV2Xdot3RemEEEEntry	1.3.111.2.802.3.1.5.1.3.4.1		not-accessible	Information about a particular port component.
I32 lldpV2Xdot3RemTxTwSys	1.3.111.2.802.3.1.5.1.3.4.1.1	Integer32	read-only	A GET returns the value of Tw_sys_tx that the remote system can support in the transmit direction. This object maps to the variable RemTxSystemValue as defined in IEEE Std 802.3 78.4.2.3.
I32 lldpV2Xdot3RemTxTwSysEcho	1.3.111.2.802.3.1.5.1.3.4.1.2	Integer32	read-only	A GET returns the value of Tw_sys_tx that the local system is advertising that it can support in the transmit direction as echoed by the remote system under the control of the EEE DLL receiver state diagram. This object maps to the variable RemTxSystemValueEcho as defined in IEEE Std 802.3 78.4.2.3
I32 lldpV2Xdot3RemRxTwSys	1.3.111.2.802.3.1.5.1.3.4.1.3	Integer32	read-only	A GET returns the value of Tw_sys_tx that the remote system is requesting in the receive direction. This object maps to the variable RemRxSystemValue as defined in IEEE Std 802.3 78.4.2.3.
I32 lldpV2Xdot3RemRxTwSysEcho	1.3.111.2.802.3.1.5.1.3.4.1.4	Integer32	read-only	A GET returns the value of Tw_sys_tx that the local system is advertising that it is requesting in the receive direction and is echoed by the remote system under the control of the EEE DLL transmitter state diagram. This object maps to the variable RemRxSystemValueEcho as defined in IEEE Std 802.3 78.4.2.3.
I32 lldpV2Xdot3RemFbTwSys	1.3.111.2.802.3.1.5.1.3.4.1.5	Integer32	read-only	A GET returns the value of the fallback Tw_sys_tx that the remote system is advertising. This object maps to the variable RemFbSystemValue as defined in IEEE Std 802.3 78.4.2.3.
lldpV2Xdot3Conformance	1.3.111.2.802.3.1.5.2
lldpV2Xdot3Compliances	1.3.111.2.802.3.1.5.2.1
lldpV2Xdot3TxRxCompliance	1.3.111.2.802.3.1.5.2.1.1			A compliance statement for SNMP entities that implement the LLDP IEEE 802.3 organizational extension MIB. This group is mandatory for all agents that implement the LLDP IEEE 802.3 organizational extension in TX and/or RX mode. This version defines compliance requirements for V2 of the LLDP MIB.
lldpV2Xdot3TxCompliance	1.3.111.2.802.3.1.5.2.1.2			The compliance statement for SNMP entities that implement the LLDP IEEE 802.3 organizational extension MIB. This group is mandatory for agents that implement the LLDP IEEE 802.3 organizational extension in the TX mode. This version defines compliance requirements for V2 of the LLDP MIB.
lldpV2Xdot3RxCompliance	1.3.111.2.802.3.1.5.2.1.3			The compliance statement for SNMP entities that implement the LLDP IEEE 802.3 organizational extension MIB. This group is mandatory for agents that implement the LLDP IEEE 802.3 organizational extension in the RX mode. This version defines compliance requirements for V2 of the LLDP MIB.
lldpV2Xdot3Groups	1.3.111.2.802.3.1.5.2.2
lldpV2Xdot3ConfigGroup	1.3.111.2.802.3.1.5.2.2.1			The collection of objects that are used to configure the LLDP IEEE 802.3 organizational extension implementation behavior.
lldpV2Xdot3LocSysGroup	1.3.111.2.802.3.1.5.2.2.2			The collection of objects that are used to represent LLDP IEEE 802.3 organizational extension Local Device Information.
lldpV2Xdot3RemSysGroup	1.3.111.2.802.3.1.5.2.2.3			The collection of objects that are used to represent LLDP IEEE 802.3 organizational extension Local Device Information.

RFC description

IEEE 802.3 LLDP (Link Layer Discovery Protocol) extension for DOT3 MAU types (RFC 8357), defining power classification and management.

Start monitoring Vendor-neutral IEEE 802.3 standard (managed Ethernet switch/NIC, LLDP extension) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download IEEE8023-DOT3-LLDP-EXT-V2-MIB

What Is IEEE8023-DOT3-LLDP-EXT-V2-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description