All MIBs › IEEE8023-DOT3-LLDP-EXT-V2-MIB › lldpV2Xdot3PortConfigTLVsTxEnable
lldpV2Xdot3PortConfigTLVsTxEnable
Module: IEEE8023-DOT3-LLDP-EXT-V2-MIB
OID (symbolic): IEEE8023-DOT3-LLDP-EXT-V2-MIB::lldpV2Xdot3PortConfigTLVsTxEnable
OID (numeric): 1.3.111.2.802.3.1.5.1.1.1.1.1
Node type: OBJECT-TYPE
Type: Bits
Access: read-write
Description: The lldpV2Xdot3PortConfigTLVsTxEnable, defined as a bitmap, includes the IEEE 802.3 organizationally defined set of LLDP TLVs whose transmission is allowed by the local LLDP agent by the network management. Each bit in the bitmap corresponds to an IEEE 802.3 subtype associated with a specific IEEE 802.3 optional TLV.
The bit 'macPhyConfigStatus(0)' indicates that the LLDP agent should transmit 'MAC/PHY configuration/status TLV'.
The bit 'powerViaMDI(1)' indicates that the LLDP agent should transmit 'Power via MDI TLV'.
The bit 'unused(2)' is no longer used; this was used for the 'Link Aggregation TLV' in the previous version.
The bit 'maxFrameSize(3)' indicates that the LLDP agent should transmit 'Maximum-frame-size TLV'.
The default value for lldpV2Xdot3PortConfigTLVsTxEnable object is an empty set, which means no enumerated values are set.
The value of this object is restored from non-volatile storage after a re-initialization of the management system.
What is lldpV2Xdot3PortConfigTLVsTxEnable?
A bitmap an admin sets to choose which optional IEEE 802.3 LLDP TLVs this port advertises to neighbors: macPhyConfigStatus(0) for auto-neg/duplex info, powerViaMDI(1) for PoE capability, and maxFrameSize(3) for the port's max frame size, with an empty set as the default meaning none are sent.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.111.2.802.3.1.5.1.1.1.1.1 snmpwalk -v2c -c public <target> IEEE8023-DOT3-LLDP-EXT-V2-MIB::lldpV2Xdot3PortConfigTLVsTxEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.111.2.802.3.1.5.1.1.1.1.1.1 snmpget -v2c -c public <target> IEEE8023-DOT3-LLDP-EXT-V2-MIB::lldpV2Xdot3PortConfigTLVsTxEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.111.2.802.3.1.5.1.1.1.1.1.1 s <value>
Start monitoring Vendor-neutral IEEE 802.3 standard (managed Ethernet switch/NIC, LLDP extension) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IEEE8023-DOT3-LLDP-EXT-V2-MIB::lldpV2Xdot3PortConfigTLVsTxEnable OID value, configure state conditions and alerts, and monitor any Vendor-neutral IEEE 802.3 standard (managed Ethernet switch/NIC, LLDP extension) from a single console.
OID Breakdown
Upper-level ancestors (2 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.111.2.802.3.1.5 | ieee8023lldpV2Xdot3MIB | IEEE8023-DOT3-LLDP-EXT-V2-MIB |
| 1.3.111.2.802.3.1.5.1 | lldpV2Xdot3Objects | IEEE8023-DOT3-LLDP-EXT-V2-MIB |
| 1.3.111.2.802.3.1.5.1.1 | lldpV2Xdot3Config | IEEE8023-DOT3-LLDP-EXT-V2-MIB |
| 1.3.111.2.802.3.1.5.1.1.1 | lldpV2Xdot3PortConfigTable | IEEE8023-DOT3-LLDP-EXT-V2-MIB |
| 1.3.111.2.802.3.1.5.1.1.1.1 | lldpV2Xdot3PortConfigEntry | IEEE8023-DOT3-LLDP-EXT-V2-MIB |
| 1.3.111.2.802.3.1.5.1.1.1.1.1 | lldpV2Xdot3PortConfigTLVsTxEnable | IEEE8023-DOT3-LLDP-EXT-V2-MIB |