HUAWEI-WLAN-AP-UPDATE-MIB

All MIBs › HUAWEI-WLAN-AP-UPDATE-MIB

Organization: Huawei Technologies Co.,Ltd.

Last Updated: 2020-07-08

Category: Technology: Wireless, Vendor: Huawei, Wireless and WLAN

Description: Huawei WLAN MIB for managing AP firmware and software update operations including upgrade scheduling and status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-WLAN-AP-UPDATE-MIB?

HUAWEI-WLAN-AP-UPDATE-MIB is a Huawei-proprietary SNMP module for Huawei WLAN controller/AP solutions that manages firmware and software update operations for wireless access points, including upgrade scheduling and progress tracking. It exposes objects describing the update/upgrade workflow state for one or more APs, such as progress status and conditions that can interrupt an update. Operators use it to monitor the software status of APs during upgrade windows - tracking hwWlanApUpdateProgressStatus to confirm an AP has successfully advanced through download, verification, and activation stages, and watching for conditions like insufficient memory that would cause an upgrade to stall or fail, a direct software-health signal for the AP's firmware lifecycle. It depends on Huawei's broader WLAN AP management MIBs for AP identity and inventory context. It is typically deployed on Huawei WLAN Access Controllers (ACs) managing fleets of APs where centralized, NMS-driven firmware rollouts need to be tracked for success/failure across many devices. Engineers can download the HUAWEI-WLAN-AP-UPDATE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-WLAN-AP-UPDATE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei WLAN Access Controller (AC)
Huawei wireless Access Point (AP)

Monitoring Examples

An operator rolling out a firmware update would poll hwWlanApUpdateProgressStatus per AP to confirm each device advances through the expected upgrade stages; if an AP reports the insufficient-memory condition (insufficientMemoryAsNgeEnable) instead of completing, this flags a specific AP that needs a manual reboot or memory cleanup before the upgrade can proceed. No additional object/table names beyond these were present in the sample set for this module.

What Can Be Monitored

AP firmware upgrade progress status
upgrade scheduling state
insufficient-memory upgrade failure condition
AP software version after update

Imported Objects

From HUAWEI-WLAN-AP-MIB

hwWlanApId	OBJECT-TYPE
hwWlanApMac	OBJECT-TYPE
hwWlanApName	OBJECT-TYPE
hwWlanApType	OBJECT-TYPE

From HUAWEI-WLAN-CONFIGURATION-MIB

hwAPGroupName

OBJECT-TYPE

From HUAWEI-WLAN-MIB

hwWlan

MODULE-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
MacAddress
RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
I32 hwWlanApFlashProgress	1.3.6.1.4.1.2011.6.139.14.3.3.1.3	Integer32	read-only	This object indicates the flash writing progress.
INT hwWlanApTypeGroupUpdateAdminOper	1.3.6.1.4.1.2011.6.139.14.3.5.1.2	INTEGER	read-write	This object indicates an upgrade operation start(1): The AP upgrade starts reset(2): After the upgrade is complete, the APs are restarted cancel(3): The upgrade is canceled.
hwWlanApTypeGroupUpdateEntry	1.3.6.1.4.1.2011.6.139.14.3.5.1		not-accessible	The indexes of this table are hwWlanApType and hwAPGroupName.
OCT hwWlanApTypeGroupUpdateFilename	1.3.6.1.4.1.2011.6.139.14.3.5.1.1	OCTET STRING	read-write	This object indicates the name of the upgrade file matching the type of the APs to be upgraded.
OCT hwWlanApTypeGroupUpdatePatchFilename	1.3.6.1.4.1.2011.6.139.14.3.5.1.5	OCTET STRING	read-write	This object indicates the name of the patch upgrade file matching the type of the APs to be upgraded.
I32 hwWlanApTypeGroupUpdatePercent	1.3.6.1.4.1.2011.6.139.14.3.5.1.3	Integer32	read-only	This object indicates the AP upgrade progress, namely, the percentage of upgraded APs to all APs of the same type.
ROW hwWlanApTypeGroupUpdateRowStatus	1.3.6.1.4.1.2011.6.139.14.3.5.1.4	RowStatus	read-create	This object indicates the row status of this table.
hwWlanApTypeGroupUpdateTable	1.3.6.1.4.1.2011.6.139.14.3.5		not-accessible	This table is used to map AP types and AP groups to upgrade file names. It allows you to upgrade APs in batches based on AP types and AP groups.
hwWlanApUpdate	1.3.6.1.4.1.2011.6.139.14			V1.21, add insufficientMemoryAsNgeEnable for hwWlanApUpdateProgressStatus
INT hwWlanApUpdateAdminOper	1.3.6.1.4.1.2011.6.139.14.3.2.1.2	INTEGER	read-create	This object indicates that the APs begin to upgrade start(1): The AP upgrade starts reset(2): After the upgrade is complete, the APs are restarted cancel(3): The upgrade is canceled.
I32 hwWlanApUpdateApChannel	1.3.6.1.4.1.2011.6.139.14.3.3.1.10	Integer32	read-only	This object indicates the Ap channel of the APs upgraded.
OCT hwWlanApUpdateApGroup	1.3.6.1.4.1.2011.6.139.14.3.3.1.8	OCTET STRING	read-only	This object indicates the Ap group of the APs upgraded.
I32 hwWlanApUpdateApPartitionId	1.3.6.1.4.1.2011.6.139.14.3.3.1.9	Integer32	read-only	This object indicates the Ap partition id of the APs upgraded.
NTF hwWlanApUpdateBeginTrap	1.3.6.1.4.1.2011.6.139.14.1.1			This object indicates an AP upgrade start alarm..
OCT hwWlanApUpdateByFileName	1.3.6.1.4.1.2011.6.139.14.2.3	OCTET STRING	read-only	AP upgrade file name.
hwWlanApUpdateCompliance	1.3.6.1.4.1.2011.6.139.14.4.1.1			Description.
hwWlanApUpdateCompliances	1.3.6.1.4.1.2011.6.139.14.4.1
hwWlanApUpdateConfig	1.3.6.1.4.1.2011.6.139.14.3.1
hwWlanApUpdateConformance	1.3.6.1.4.1.2011.6.139.14.4
hwWlanApUpdateEntry	1.3.6.1.4.1.2011.6.139.14.3.2.1		not-accessible	The index of this table is hwWlanApType.
OCT hwWlanApUpdateFilename	1.3.6.1.4.1.2011.6.139.14.3.2.1.1	OCTET STRING	read-create	This object indicates the name of the upgrade file matching the type of the APs to be upgraded.
INT hwWlanApUpdateFileType	1.3.6.1.4.1.2011.6.139.14.3.3.1.5	INTEGER	read-only	This object indicates the AP upgrade file type.
OCT hwWlanApUpdateFileVersion	1.3.6.1.4.1.2011.6.139.14.3.3.1.6	OCTET STRING	read-only	This object indicates the version of the upgrade file matching the type of the APs upgraded.
IP hwWlanApUpdateFTPIPAddress	1.3.6.1.4.1.2011.6.139.14.3.1.1	IpAddress	read-write	This object indicates the IPv4 address of the FTP server used in FTP upgrade mode.
OCT hwWlanApUpdateFTPIPv6Address	1.3.6.1.4.1.2011.6.139.14.3.1.10	OCTET STRING	read-write	This object indicates the IPv6 address of the FTP server.
I32 hwWlanApUpdateFTPIPv6MaxConnectNum	1.3.6.1.4.1.2011.6.139.14.3.1.16	Integer32	read-write	This object indicates the maximum number of FTP IPv6 connections.
OCT hwWlanApUpdateFTPIPv6Password	1.3.6.1.4.1.2011.6.139.14.3.1.13	OCTET STRING	read-write	This object indicates the password of the FTP IPv6 client used in FTP upgrade mode. NOTE: It should be configured together with hwWlanApUpdateFTPIPv6Address.
OCT hwWlanApUpdateFTPIPv6Username	1.3.6.1.4.1.2011.6.139.14.3.1.12	OCTET STRING	read-write	This object indicates the user name of the FTP IPv6 client used in FTP upgrade mode. NOTE: It should be configured together with hwWlanApUpdateFTPIPv6Address.
I32 hwWlanApUpdateFTPMaxConnectNum	1.3.6.1.4.1.2011.6.139.14.3.1.8	Integer32	read-write	This object indicates the maximum number of FTP IPv4 connections.
OCT hwWlanApUpdateFTPPassword	1.3.6.1.4.1.2011.6.139.14.3.1.3	OCTET STRING	read-write	This object indicates the password of the FTP IPv4 client used in FTP upgrade mode. NOTE: It should be configured together with hwWlanApUpdateFTPIPAddress.
OCT hwWlanApUpdateFTPUsername	1.3.6.1.4.1.2011.6.139.14.3.1.2	OCTET STRING	read-write	This object indicates the user name of the FTP IPv4 client used in FTP upgrade mode. NOTE: It should be configured together with hwWlanApUpdateFTPIPAddress.
OCT hwWlanApUpdateLastEndTime	1.3.6.1.4.1.2011.6.139.14.3.3.1.7	OCTET STRING	read-only	This object indicates the end-time of the upgrading.
INT hwWlanApUpdateMode	1.3.6.1.4.1.2011.6.139.14.3.1.4	INTEGER	read-write	This object indicates the AP upgrade mode.
INT hwWlanApUpdateNextOper	1.3.6.1.4.1.2011.6.139.14.2.4	INTEGER	read-only	Action after the upgrade.
hwWlanApUpdateObjectGroups	1.3.6.1.4.1.2011.6.139.14.4.2
hwWlanApUpdateObjects	1.3.6.1.4.1.2011.6.139.14.3
hwWlanApUpdateObjectsGroup	1.3.6.1.4.1.2011.6.139.14.4.2.3			Description.
INT hwWlanApUpdateOperAdminOper	1.3.6.1.4.1.2011.6.139.14.3.7.1	INTEGER	read-write	This object indicates that the APs begin to upgrade start(1): The AP upgrade starts reset(2): After the upgrade is complete, the APs are restarted cancel(3): The upgrade is canceled.
OCT hwWlanApUpdateOperApGroup	1.3.6.1.4.1.2011.6.139.14.3.7.3	OCTET STRING	read-write	This object indicates the group of the APs to be upgraded.
I32 hwWlanApUpdateOperApType	1.3.6.1.4.1.2011.6.139.14.3.7.2	Integer32	read-write	This object indicates the type of the APs to be upgraded.
hwWlanApUpdateOperEntry	1.3.6.1.4.1.2011.6.139.14.3.7
I32 hwWlanApUpdateOperPercent	1.3.6.1.4.1.2011.6.139.14.3.7.4	Integer32	read-only	This object indicates the AP upgrade progress, namely, the percentage of upgraded APs to all APs.
OCT hwWlanApUpdatePatchFilename	1.3.6.1.4.1.2011.6.139.14.3.2.1.5	OCTET STRING	read-create	This object indicates the name of the upgrade patch file matching the type of the APs to be upgraded.
I32 hwWlanApUpdatePercent	1.3.6.1.4.1.2011.6.139.14.3.2.1.3	Integer32	read-only	This object indicates the AP upgrade progress, namely, the percentage of upgraded APs to all APs of the same type.
I32 hwWlanApUpdateProgress	1.3.6.1.4.1.2011.6.139.14.3.3.1.2	Integer32	read-only	This object indicates the AP upgrade progress.
hwWlanApUpdateProgressEntry	1.3.6.1.4.1.2011.6.139.14.3.3.1		not-accessible	The index of this table is hwWlanApMac.
INT hwWlanApUpdateProgressStatus	1.3.6.1.4.1.2011.6.139.14.3.3.1.1	INTEGER	read-only	This object indicates the AP upgrade status.
hwWlanApUpdateProgressTable	1.3.6.1.4.1.2011.6.139.14.3.3		not-accessible	This table is used to query the AP upgrade progress.
I32 hwWlanApUpdateResetPartitionId	1.3.6.1.4.1.2011.6.139.14.3.2.1.6	Integer32	read-write	This object indicates the partition id for reset partition.
IP hwWlanApUpdateResetPrimaryAccessIPv4	1.3.6.1.4.1.2011.6.139.14.3.2.1.7	IpAddress	read-write	This object indicates the Ipv4 address for reset partition.
OCT hwWlanApUpdateResetPrimaryAccessIPv6	1.3.6.1.4.1.2011.6.139.14.3.2.1.8	OCTET STRING	read-write	This object indicates the Ipv6 address for reset partition.
INT hwWlanApUpdateResult	1.3.6.1.4.1.2011.6.139.14.2.1	INTEGER	read-only	AP upgrade result.
OCT hwWlanApUpdateResultStatus	1.3.6.1.4.1.2011.6.139.14.2.5	OCTET STRING	read-only	AP upgrade result status.
NTF hwWlanApUpdateResultTrap	1.3.6.1.4.1.2011.6.139.14.1.2			This object indicates the upgrade result alarm.
ROW hwWlanApUpdateRowStatus	1.3.6.1.4.1.2011.6.139.14.3.2.1.4	RowStatus	read-create	This object indicates the row status of this table.
OCT hwWlanApUpdateScheduleTaskApGroup	1.3.6.1.4.1.2011.6.139.14.3.6.1.5	OCTET STRING	read-write	This object indicates the group of the APs to be upgraded.
I32 hwWlanApUpdateScheduleTaskApType	1.3.6.1.4.1.2011.6.139.14.3.6.1.4	Integer32	read-write	This object indicates the type of the APs to be upgraded.
hwWlanApUpdateScheduleTaskEntry	1.3.6.1.4.1.2011.6.139.14.3.6.1		not-accessible	The indexes of this table is hwWlanApUpdateScheduleTaskId.
I32 hwWlanApUpdateScheduleTaskId	1.3.6.1.4.1.2011.6.139.14.3.6.1.1	Integer32	not-accessible	This object indicates the ID of the task.
ROW hwWlanApUpdateScheduleTaskRowStatus	1.3.6.1.4.1.2011.6.139.14.3.6.1.7	RowStatus	read-create	This object indicates the row status.
OCT hwWlanApUpdateScheduleTaskStartTime	1.3.6.1.4.1.2011.6.139.14.3.6.1.2	OCTET STRING	read-write	This object indicates the starting time that is in the format of 'YYYY/MM/DD,HH:MM'.
INT hwWlanApUpdateScheduleTaskState	1.3.6.1.4.1.2011.6.139.14.3.6.1.6	INTEGER	read-only	This object indicates the state of the task.
OCT hwWlanApUpdateScheduleTaskStopTime	1.3.6.1.4.1.2011.6.139.14.3.6.1.3	OCTET STRING	read-write	This object indicates the stopping time that is in the format of 'YYYY/MM/DD,HH:MM'.
hwWlanApUpdateScheduleTaskTable	1.3.6.1.4.1.2011.6.139.14.3.6		not-accessible	This table is used to create, query, and delete scheduled upgrade tasks.
IP hwWlanApUpdateSFTPIPAddress	1.3.6.1.4.1.2011.6.139.14.3.1.5	IpAddress	read-write	This object indicates the IPv4 address of the SFTP server used in SFTP upgrade mode.
OCT hwWlanApUpdateSFTPIPv6Address	1.3.6.1.4.1.2011.6.139.14.3.1.11	OCTET STRING	read-write	This object indicates the IPv6 address of the SFTP server.
I32 hwWlanApUpdateSFTPIPv6MaxConnectNum	1.3.6.1.4.1.2011.6.139.14.3.1.17	Integer32	read-write	This object indicates the maximum number of SFTP IPv6 connections.
OCT hwWlanApUpdateSFTPIPv6Password	1.3.6.1.4.1.2011.6.139.14.3.1.15	OCTET STRING	read-write	This object indicates the password of the SFTP IPv6 client used in SFTP upgrade mode. NOTE: It should be configured together with hwWlanApUpdateSFTPIPv6Address.
OCT hwWlanApUpdateSFTPIPv6Username	1.3.6.1.4.1.2011.6.139.14.3.1.14	OCTET STRING	read-write	This object indicates the user name of the SFTP IPv6 client used in SFTP upgrade mode. NOTE: It should be configured together with hwWlanApUpdateSFTPIPv6Address.
I32 hwWlanApUpdateSFTPMaxConnectNum	1.3.6.1.4.1.2011.6.139.14.3.1.9	Integer32	read-write	This object indicates the maximum number of SFTP IPv4 connections.
OCT hwWlanApUpdateSFTPPassword	1.3.6.1.4.1.2011.6.139.14.3.1.7	OCTET STRING	read-write	This object indicates the password of the SFTP IPv4 client used in SFTP upgrade mode. NOTE: It should be configured together with hwWlanApUpdateSFTPIPAddress.
OCT hwWlanApUpdateSFTPUsername	1.3.6.1.4.1.2011.6.139.14.3.1.6	OCTET STRING	read-write	This object indicates the user name of the SFTP IPv4 client used in SFTP upgrade mode. NOTE: It should be configured together with hwWlanApUpdateSFTPIPAddress.
hwWlanApUpdateTable	1.3.6.1.4.1.2011.6.139.14.3.2		not-accessible	This table maps AP types to upgrade file names. It allows you to upgrade APs in batches based on AP types.
OCT hwWlanApUpdateTime	1.3.6.1.4.1.2011.6.139.14.2.2	OCTET STRING	read-only	AP upgrade time.
hwWlanApUpdateTrap	1.3.6.1.4.1.2011.6.139.14.1
hwWlanApUpdateTrapGroup	1.3.6.1.4.1.2011.6.139.14.4.2.1			Description.
hwWlanApUpdateTrapObjects	1.3.6.1.4.1.2011.6.139.14.2
hwWlanApUpdateTrapObjectsGroup	1.3.6.1.4.1.2011.6.139.14.4.2.2			Description.
INT hwWlanApUpdateType	1.3.6.1.4.1.2011.6.139.14.3.3.1.4	INTEGER	read-only	This object indicates the AP upgrade type.
NTF hwWlanApUpdateUbootNotMatchTrap	1.3.6.1.4.1.2011.6.139.14.1.3			This object indicates that the Uboot version does not match the AP version.
INT hwWlanSingleApUpdateAdminOper	1.3.6.1.4.1.2011.6.139.14.3.4.1.1	INTEGER	read-write	This object indicates a single AP upgrade start(1): The AP upgrade starts reset(2): After the upgrade is complete, the AP is restarted cancel(3): The upgrade is canceled.
hwWlanSingleApUpdateEntry	1.3.6.1.4.1.2011.6.139.14.3.4.1		not-accessible	The index of this table is hwWlanApMac.
OCT hwWlanSingleApUpdateFilename	1.3.6.1.4.1.2011.6.139.14.3.4.1.3	OCTET STRING	read-create	This object indicates the name of the upgrade file matching the type of the AP to be upgraded.
I32 hwWlanSingleApUpdatePercent	1.3.6.1.4.1.2011.6.139.14.3.4.1.2	Integer32	read-only	This object indicates the single AP upgrade progress.
IP hwWlanSingleApUpdatePrimaryAccessIPv4	1.3.6.1.4.1.2011.6.139.14.3.4.1.4	IpAddress	read-write	This object indicates the Ipv4 address of the upgrade reset partition.
OCT hwWlanSingleApUpdatePrimaryAccessIPv6	1.3.6.1.4.1.2011.6.139.14.3.4.1.5	OCTET STRING	read-write	This object indicates the Ipv6 address of the upgrade reset partition.
hwWlanSingleApUpdateTable	1.3.6.1.4.1.2011.6.139.14.3.4		not-accessible	This table is used to specify the mapping relationship between AP IDs and upgrade file names and to perform upgrade based on specified APs.

RFC description

Manages wireless AP firmware update operations including progress tracking and upgrade status monitoring.

Start monitoring Huawei WLAN Access Controller/access point (AP firmware update rollout) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-WLAN-AP-UPDATE-MIB

What Is HUAWEI-WLAN-AP-UPDATE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description