HUAWEI-WLAN-CAPWAP-MIB

All MIBs › HUAWEI-WLAN-CAPWAP-MIB

Organization: Huawei Technologies Co.,Ltd.

Last Updated: 2019-04-23

Category: Technology: Wireless, Vendor: Huawei, Wireless and WLAN

Description: Huawei WLAN MIB implementing CAPWAP (Control and Provisioning of Wireless Access Points) protocol management for AC-to-AP tunnels.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-WLAN-CAPWAP-MIB?

HUAWEI-WLAN-CAPWAP-MIB is a Huawei Technologies proprietary MIB configuring CAPWAP (Control And Provisioning of Wireless Access Points) tunnel security between a Huawei WLAN controller and its access points. Its objects cover the source-interface selection method and IPv4/IPv6 address, DTLS enable and pre-shared key (with a default-PSK switch), IPv6-enable flag, inter-controller DTLS encryption/PSK, echo interval/retry count, local/remote control-priority, message-integrity and sensitive-info PSKs (with inter-controller variants and a mandatory-match switch), and a message-check switch. As a configuration/security MIB it lets an administrator confirm CAPWAP tunnel encryption (DTLS) is enabled and correctly keyed between controller and APs. It is deployed on Huawei Technologies WLAN controllers/access points (CAPWAP). Engineers can download the HUAWEI-WLAN-CAPWAP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-WLAN-CAPWAP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei Technologies WLAN controllers/access points (CAPWAP)

Monitoring Examples

An administrator checks hwWlanCapwapDtlsSwitch and hwWlanCapwapDtlsPsk to confirm CAPWAP tunnel encryption is correctly configured between a Huawei WLAN controller and its access points.

What Can Be Monitored

CAPWAP tunnel DTLS encryption and key configuration

Imported Objects

From HUAWEI-WLAN-MIB

hwWlan

MODULE-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
MacAddress
RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwWlanCapwap	1.3.6.1.4.1.2011.6.139.9			Modify the enumerated values and property of the node hwWlanCapwapIpv6Enable at the WMPV1R19C00 of WMP version.
hwWlanCapwapSourceInterface	1.3.6.1.4.1.2011.6.139.9.1
I32 hwWlanCapwapSourceInterfaceValue	1.3.6.1.4.1.2011.6.139.9.1.1	Integer32	read-write	This object indicates the interface number when hwWlanCapwapSourceInterfaceMethod is set to vlanif(2) or loopback(3).
INT hwWlanCapwapSourceInterfaceMethod	1.3.6.1.4.1.2011.6.139.9.1.2	INTEGER	read-write	operation method of capwap source interface.It can be set default(1): use default setting vlanif(2): use vlanif interface loopback(3): use loopback interface ipaddress(4):user ip address
IP hwWlanCapwapSourceIPv4Address	1.3.6.1.4.1.2011.6.139.9.1.3	IpAddress	read-write	If hwWlanCapwapSourceInterfaceMethod is set to ipaddress(4), this object is used to identify the IP address of the source port.
OCT hwWlanCapwapSourceIPv6Address	1.3.6.1.4.1.2011.6.139.9.1.4	OCTET STRING	read-write	If hwWlanCapwapSourceInterfaceMethod is set to ipaddress(6), this object is used to identify the IP address of the source port.
hwWlanCapwapSysPara	1.3.6.1.4.1.2011.6.139.9.2
INT hwWlanCapwapDtlsSwitch	1.3.6.1.4.1.2011.6.139.9.2.1	INTEGER	read-write	This object indicates the status of the global DTLS function. The default value is 1: enable 2: disable.
OCT hwWlanCapwapDtlsPsk	1.3.6.1.4.1.2011.6.139.9.2.2	OCTET STRING	read-write	The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device
INT hwWlanCapwapDtlsDefaultPskSwitch	1.3.6.1.4.1.2011.6.139.9.2.3	INTEGER	read-write	The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device.
INT hwWlanCapwapIpv6Enable	1.3.6.1.4.1.2011.6.139.9.2.4	INTEGER	read-write	Work mode of capwap source. It can be set ipv4(1): capwap source just can be configed to ipv4 source. ipv6(2): capwap source just can be configed to ipv6 source. doubleStack(3): capwap source can be configed to ipv4 and ipv6 source at the same time.
INT hwWlanCapwapInterControllerDtlsEncrpyt	1.3.6.1.4.1.2011.6.139.9.2.5	INTEGER	read-write	The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device.
OCT hwWlanCapwapInterControllerDtlsPsk	1.3.6.1.4.1.2011.6.139.9.2.6	OCTET STRING	read-write	The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device.
I32 hwCapwapEchoInterval	1.3.6.1.4.1.2011.6.139.9.2.7	Integer32	read-write	The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device.
I32 hwCapwapEchoTimes	1.3.6.1.4.1.2011.6.139.9.2.8	Integer32	read-write	The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device.
I32 hwWlanCapwapControlPriorityLocal	1.3.6.1.4.1.2011.6.139.9.2.9	Integer32	read-write	The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device.
I32 hwWlanCapwapControlPriorityRemote	1.3.6.1.4.1.2011.6.139.9.2.10	Integer32	read-write	The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device.
OCT hwWlanCapwapSensitiveInfoPsk	1.3.6.1.4.1.2011.6.139.9.2.11	OCTET STRING	read-write	The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device
OCT hwWlanCapwapInterControllerSensitiveInfoPsk	1.3.6.1.4.1.2011.6.139.9.2.12	OCTET STRING	read-write	The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device.
OCT hwWlanCapwapMessageIntegrityPsk	1.3.6.1.4.1.2011.6.139.9.2.13	OCTET STRING	read-write	The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device
OCT hwWlanCapwapInterControllerMessageIntegrityPsk	1.3.6.1.4.1.2011.6.139.9.2.14	OCTET STRING	read-write	The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device.
INT hwWlanCapwapMessageIntegrityPskMandatoryMatchSwitch	1.3.6.1.4.1.2011.6.139.9.2.15	INTEGER	read-write	The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device.
INT hwWlanCapwapMsgCheckSwitch	1.3.6.1.4.1.2011.6.139.9.2.16	INTEGER	read-write	The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device.
INT hwWlanCapwapInterControllerMsgCheckSwitch	1.3.6.1.4.1.2011.6.139.9.2.17	INTEGER	read-write	The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device.
INT hwWlanCapwapDtlsDataSwitch	1.3.6.1.4.1.2011.6.139.9.2.18	INTEGER	read-write	This object indicates the status of the global DTLS function of data-link. The default value is 1: disable.
INT hwWlanCapwapInterControllerDtlsDataSwitch	1.3.6.1.4.1.2011.6.139.9.2.19	INTEGER	read-write	This object indicates the status of the inter-controller DTLS function of data-link. The default value is 1: disable.
hwWlanCapwapSource	1.3.6.1.4.1.2011.6.139.9.3
hwWlanCapwapSourceTable	1.3.6.1.4.1.2011.6.139.9.3.1		not-accessible	Description.
hwWlanCapwapSourceEntry	1.3.6.1.4.1.2011.6.139.9.3.1.1		not-accessible	Description.
I32 hwWlanCapwapSourceIndex	1.3.6.1.4.1.2011.6.139.9.3.1.1.1	Integer32	not-accessible	the index of capwap source interface.
INT hwWlanCapwapSourceMethod	1.3.6.1.4.1.2011.6.139.9.3.1.1.2	INTEGER	read-write	Operation method of capwap source interface.It can be set vlanif(2): use vlanif interface loopback(3): use loopback interface ipv4Address(4): use ipv4 adddress ipv6Address(5): use ipv6 address.
I32 hwWlanCapwapSourceValue	1.3.6.1.4.1.2011.6.139.9.3.1.1.3	Integer32	read-write	the value of capwap source interface.
ROW hwWlanCapwapSourceRowStatus	1.3.6.1.4.1.2011.6.139.9.3.1.1.4	RowStatus	read-write	Row status: mainly to support to add or delete the relationship of the interface and the capwap-source. createAndGo(4): add a relationship. destroy(6): delete the relationship.
IP hwWlanCapwapSourceIPv4	1.3.6.1.4.1.2011.6.139.9.3.1.1.5	IpAddress	read-write	This object indicates the value of capwap source ipv4 address.
OCT hwWlanCapwapSourceIPv6	1.3.6.1.4.1.2011.6.139.9.3.1.1.6	OCTET STRING	read-write	This object indicates the value of capwap source ipv6 address.
hwWlanCapwapConformance	1.3.6.1.4.1.2011.6.139.9.4
hwWlanCapwapCompliances	1.3.6.1.4.1.2011.6.139.9.4.1
hwWlanCapwapCompliance	1.3.6.1.4.1.2011.6.139.9.4.1.1			Description.
hwWlanCapwapObjectGroups	1.3.6.1.4.1.2011.6.139.9.4.2
hwWlanCapwapSourceInterfaceGroup	1.3.6.1.4.1.2011.6.139.9.4.2.1			Description.
hwWlanCapwapSysParaGroup	1.3.6.1.4.1.2011.6.139.9.4.2.2			Description.
hwWlanCapwapSourceGroup	1.3.6.1.4.1.2011.6.139.9.4.2.3			Description.

RFC description

Manages CAPWAP (Control and Provisioning of Wireless Access Points) configuration for Huawei WLAN access points, including IPv4/IPv6 addressing and protocol security settings.

Start monitoring Huawei WLAN controller/access point (CAPWAP DTLS tunnel security) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-WLAN-CAPWAP-MIB

What Is HUAWEI-WLAN-CAPWAP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description