HUAWEI-WLAN-CONFIGURATION-MIB

All MIBs › HUAWEI-WLAN-CONFIGURATION-MIB

Organization: Huawei Technologies Co.,Ltd.

Last Updated: 2020-08-13

Category: Technology: Wireless, Vendor: Huawei, Wireless and WLAN

Description: Huawei WLAN MIB for managing global WLAN configuration parameters on wireless LAN controllers and access points.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-WLAN-CONFIGURATION-MIB?

This is a Huawei private enterprise MIB for managing global WLAN configuration parameters on Huawei wireless LAN controllers and access points, covering settings that apply across the wireless system rather than to a single VAP. It exposes system-wide WLAN configuration objects — controller/AP global parameters such as RF management defaults, WLAN service enablement, and related feature toggles. As a configuration MIB it doesn't report sensor data directly, but administrators rely on it to confirm global WLAN feature settings are correctly applied across the controller, which underlies the software behavior of every AP and VAP it manages. It is closely related to and used alongside HUAWEI-WLAN-VAP-MIB, which handles per-VAP settings that sit beneath this global configuration. It is deployed on Huawei WLAN access controllers and access points in enterprise and campus Wi-Fi deployments, and the HUAWEI-WLAN-CONFIGURATION-MIB MIB defines the global feature-enablement and RF-management objects administrators check before troubleshooting individual APs.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-WLAN-CONFIGURATION-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei WLAN access controller (AC)
Huawei wireless access point (AP)

Monitoring Examples

No sample_objects were provided; based on its description of global WLAN configuration, a realistic use would be checking system-wide WLAN feature-enablement and RF-management default objects to confirm the controller's global settings match intended policy before troubleshooting individual AP or VAP issues.

What Can Be Monitored

global WLAN service enablement
system-wide RF management defaults
controller-level WLAN feature settings

Imported Objects

From HUAWEI-WLAN-AP-MIB

hwWlanApMac	OBJECT-TYPE
hwWlanApName	OBJECT-TYPE

From HUAWEI-WLAN-AP-RADIO-MIB

hwWlanRadioID

OBJECT-TYPE

From HUAWEI-WLAN-MIB

hwWlan

MODULE-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DateAndTime
MacAddress
RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT hw2gRadioAgileAntennaPolarSwitch	1.3.6.1.4.1.2011.6.139.11.1.16.1.64	INTEGER	read-write	This object indicates the status of the agile antenna polarization. The default value is 1.
OCT hw2gRadioAirScanProfile	1.3.6.1.4.1.2011.6.139.11.1.16.1.55	OCTET STRING	read-write	This object indicates the bound air scan profile.
INT hw2gRadioApEDCABEAckPolicy	1.3.6.1.4.1.2011.6.139.11.1.16.1.33	INTEGER	read-write	This object indicates the EDCA parameter AckPolicy for BE services on APs. The default value is 1.
U32 hw2gRadioApEDCABEAIFSN	1.3.6.1.4.1.2011.6.139.11.1.16.1.31	Unsigned32	read-write	This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for BE services on APs. The default value is 3.
U32 hw2gRadioApEDCABEECWmax	1.3.6.1.4.1.2011.6.139.11.1.16.1.29	Unsigned32	read-write	This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for BE services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 6.
U32 hw2gRadioApEDCABEECWmin	1.3.6.1.4.1.2011.6.139.11.1.16.1.30	Unsigned32	read-write	This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for BE services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 4.
U32 hw2gRadioApEDCABETXOPLimit	1.3.6.1.4.1.2011.6.139.11.1.16.1.32	Unsigned32	read-write	This object indicates the EDCA parameter TXOPLimit for BE services on APs. It indicates the transmission opportunity limit. The default value is 0. The unit is 32 us.
INT hw2gRadioApEDCABKAckPolicy	1.3.6.1.4.1.2011.6.139.11.1.16.1.38	INTEGER	read-write	This object indicates the EDCA parameter AckPolicy for BK services on APs. The default value is 1.
U32 hw2gRadioApEDCABKAIFSN	1.3.6.1.4.1.2011.6.139.11.1.16.1.36	Unsigned32	read-write	This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for BK services on APs. The default value is 7.
U32 hw2gRadioApEDCABKECWmax	1.3.6.1.4.1.2011.6.139.11.1.16.1.34	Unsigned32	read-write	This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for BK services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 10.
U32 hw2gRadioApEDCABKECWmin	1.3.6.1.4.1.2011.6.139.11.1.16.1.35	Unsigned32	read-write	This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for BK services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 4.
U32 hw2gRadioApEDCABKTXOPLimit	1.3.6.1.4.1.2011.6.139.11.1.16.1.37	Unsigned32	read-write	This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for BK services on APs. The default value is 0. The unit is 32 us.
INT hw2gRadioApEDCAVideoAckPolicy	1.3.6.1.4.1.2011.6.139.11.1.16.1.28	INTEGER	read-write	This object indicates the EDCA parameter AckPolicy for video services on APs. The default value is 1.
U32 hw2gRadioApEDCAVideoAIFSN	1.3.6.1.4.1.2011.6.139.11.1.16.1.26	Unsigned32	read-write	This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for video services on APs. The default value is 1.
U32 hw2gRadioApEDCAVideoECWmax	1.3.6.1.4.1.2011.6.139.11.1.16.1.24	Unsigned32	read-write	This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for video services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 4.
U32 hw2gRadioApEDCAVideoECWmin	1.3.6.1.4.1.2011.6.139.11.1.16.1.25	Unsigned32	read-write	This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for video services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 3.
U32 hw2gRadioApEDCAVideoTXOPLimit	1.3.6.1.4.1.2011.6.139.11.1.16.1.27	Unsigned32	read-write	This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for video services on APs. The default value is 94. The unit is 32 us.
INT hw2gRadioApEDCAVoiceAckPolicy	1.3.6.1.4.1.2011.6.139.11.1.16.1.23	INTEGER	read-write	This object indicates the EDCA parameter AckPolicy for voice services on APs. The default value is 1.
U32 hw2gRadioApEDCAVoiceAIFSN	1.3.6.1.4.1.2011.6.139.11.1.16.1.21	Unsigned32	read-write	This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for voice services on APs. The default value is 1.
U32 hw2gRadioApEDCAVoiceECWmax	1.3.6.1.4.1.2011.6.139.11.1.16.1.19	Unsigned32	read-write	This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for voice services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 3.
U32 hw2gRadioApEDCAVoiceECWmin	1.3.6.1.4.1.2011.6.139.11.1.16.1.20	Unsigned32	read-write	This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for voice services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 2.
U32 hw2gRadioApEDCAVoiceTXOPLimit	1.3.6.1.4.1.2011.6.139.11.1.16.1.22	Unsigned32	read-write	This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for voice services on APs. The default value is 47. The unit is 32 us.
U32 hw2gRadioAutonavigationBeaconInterval	1.3.6.1.4.1.2011.6.139.11.1.16.1.73	Unsigned32	read-write	This object indicates a autonavigation beacon interval. The default value is 60. It is expressed in ms.
OCT hw2gRadioAutoOffServiceEndTime	1.3.6.1.4.1.2011.6.139.11.1.16.1.49	OCTET STRING	read-write	This object indicates the end time for disabling of the radio. The value is in the format of hh:mm:ss NOTE ? hh specifies the hour. The value is an integer that ranges from 0 to 23.? mm specifies the minute. The value is an integer that ranges from 0 to 59.? ss specifies the second. The value is an integer that ranges from 0 to 59.
OCT hw2gRadioAutoOffServiceStartTime	1.3.6.1.4.1.2011.6.139.11.1.16.1.48	OCTET STRING	read-write	This object indicates the start time for disabling the radio. The value is in the format of hh:mm:ss NOTE ? hh specifies the hour. The value is an integer that ranges from 0 to 23.? mm specifies the minute. The value is an integer that ranges from 0 to 59.? ss specifies the second. The value is an integer that ranges from 0 to 59.
INT hw2gRadioAutoOffServiceSwitch	1.3.6.1.4.1.2011.6.139.11.1.16.1.47	INTEGER	read-write	This object indicates the status of the scheduled radio disabling function. The default value is 1.
U32 hw2gRadioBeaconInterval	1.3.6.1.4.1.2011.6.139.11.1.16.1.6	Unsigned32	read-write	This object indicates a Beacon interval. The default value is 100. It is expressed in ms.
INT hw2gRadioBeamformingSwitch	1.3.6.1.4.1.2011.6.139.11.1.16.1.43	INTEGER	read-write	This object indicates the status of the beamforming function. The default value is 1.
INT hw2gRadioChannelSwitchAnnouncementSwitch	1.3.6.1.4.1.2011.6.139.11.1.16.1.45	INTEGER	read-write	This object indicates the status of the channel switchover announcement function. The default value is 1.
INT hw2gRadioChannelSwitchMode	1.3.6.1.4.1.2011.6.139.11.1.16.1.46	INTEGER	read-write	This object indicates the channel switch announcement mode. The default value is 1.
INT hw2gRadioDot11axGuardIntervalMode	1.3.6.1.4.1.2011.6.139.11.1.16.1.71	INTEGER	read-write	This object indicates the dot11ax GI mode. The default value is 1.
U32 hw2gRadioDot11bgBasicRate	1.3.6.1.4.1.2011.6.139.11.1.16.1.15	Unsigned32	read-write	This object indicates the basic rate set of the 802.11bg protocol. The default value is 3 ? bit0: 1 Mbit/s ? bit1: 2 Mbit/s ? bit2: 5.5 Mbit/s ? bit3: 6 Mbit/s ? bit4: 9 Mbit/s ? bit5: 11 Mbit/s ? bit6: 12 Mbit/s ? bit7: 18 Mbit/s ? bit8: 24 Mbit/s ? bit9: 36 Mbit/s ? bit10: 48 Mbit/s ? bit11: 54 Mbit/s.
U32 hw2gRadioDot11bgSupportRate	1.3.6.1.4.1.2011.6.139.11.1.16.1.16	Unsigned32	read-write	This object indicates the supported rate set of the 802.11bg protocol. The default value is 0xFFF ? bit0: 1 Mbit/s? bit1: 2 Mbit/s? bit2: 5.5 Mbit/s? bit3: 6 Mbit/s? bit4: 9 Mbit/s? bit5: 11 Mbit/s? bit6: 12 Mbit/s ? bit7: 18 Mbit/s? bit8: 24 Mbit/s? bit9: 36 Mbit/s? bit10: 48 Mbit/s? bit11: 54 Mbit/s.
I32 hw2gRadioFragmentationThreshold	1.3.6.1.4.1.2011.6.139.11.1.16.1.12	Integer32	read-write	This object indicates the packet fragmentation threshold. The default value is 2346. It is expressed in bytes.
INT hw2gRadioGuardIntervalMode	1.3.6.1.4.1.2011.6.139.11.1.16.1.10	INTEGER	read-write	This object indicates the GI mode. The default value is 1.
MAC hw2gRadioHighwayBssid	1.3.6.1.4.1.2011.6.139.11.1.16.1.72	MacAddress	read-write	This object indicates the highway bssid.
I32 hw2gRadioHtAmpduMaxLengthExponent	1.3.6.1.4.1.2011.6.139.11.1.16.1.14	Integer32	read-write	This object indicates the maximum length of frames converged by an MPDU. The default value is 3 ? 0: 8191 bytes ? 1: 16383 bytes ? 2: 32767 bytes ? 3: 65535 bytes.
INT hw2gRadioHtAmpduSwitch	1.3.6.1.4.1.2011.6.139.11.1.16.1.13	INTEGER	read-write	This object indicates the status of the aggregation function. The default value is 2.
U32 hw2gRadioInterferenceAdjacentFrequencyThreshold	1.3.6.1.4.1.2011.6.139.11.1.16.1.52	Unsigned32	read-write	This object indicates the alarm threshold for adjacent-channel interference, namely, the percentage of the adjacent-channel interference power against the maximum power. The default value is 50.
INT hw2gRadioInterferenceDetectSwitch	1.3.6.1.4.1.2011.6.139.11.1.16.1.50	INTEGER	read-write	This object indicates the status of the user-by-user power control function. The default value is 1.
U32 hw2gRadioInterferenceIntraFrequencyThreshold	1.3.6.1.4.1.2011.6.139.11.1.16.1.51	Unsigned32	read-write	This object indicates the alarm threshold for co-channel interference, namely, the percentage of the co-channel interference power against the maximum power. The default value is 50.
U32 hw2gRadioInterferenceStationThreshold	1.3.6.1.4.1.2011.6.139.11.1.16.1.53	Unsigned32	read-write	This object indicates the alarm threshold for station interference. When the number of the STAs detected exceeds the specified alarm threshold, the AP reports alarms to the AC.The default value is 32.
U32 hw2gRadioMulticastRate	1.3.6.1.4.1.2011.6.139.11.1.16.1.17	Unsigned32	read-write	This object indicates the multicast rate. The default value is 0x2F ? bit0: 1 Mbit/s ? bit1: 2 Mbit/s ? bit2: 5.5 Mbit/s ? bit3: 6 Mbit/s ? bit4: 9 Mbit/s ? bit5: 11 Mbit/s ? bit6: 12 Mbit/s ? bit7: 18 Mbit/s ? bit8: 24 Mbit/s ? bit9: 36 Mbit/s ? bit10: 48 Mbit/s ? bit11: 54 Mbit/s.
INT hw2gRadioPowerAutoAdjustSwitch	1.3.6.1.4.1.2011.6.139.11.1.16.1.42	INTEGER	read-write	This object indicates the status of the user-by-user power control function. The default value is 1.
OCT hw2gRadioProfileAutoOffTimeRange	1.3.6.1.4.1.2011.6.139.11.1.16.1.63	OCTET STRING	read-write	This object indicates the time range for disabling the radio.
I32 hw2gRadioProfileCCAThreshold	1.3.6.1.4.1.2011.6.139.11.1.16.1.65	Integer32	read-write	This object indicates the value of the CCA threshold. The default value is 0.
hw2gRadioProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.16.1		not-accessible	The index of this table is hw2gRadioProfileName.
hw2gRadioProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.15			Description.
OCT hw2gRadioProfileName	1.3.6.1.4.1.2011.6.139.11.1.16.1.1	OCTET STRING	not-accessible	This object indicates the name of a 2G radio profile. It is the index of the table.
INT hw2gRadioProfileRadioType	1.3.6.1.4.1.2011.6.139.11.1.16.1.59	INTEGER	read-write	This object indicates the type of radio. The default value is 17.
ROW hw2gRadioProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.16.1.56	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined? ROWSTATUS_ACTIVE: active? ROWSTATUS_NOTINSERVICE: notInService? ROWSTATUS_NOTREADY: notReady? ROWSTATUS_CREATEANDFLOW: createAndGo? ROWSTATUS_CREATEANDWAIT: createAndWait? ROWSTATUS_DESTROY: destroy.
U32 hw2gRadioProfileRxChainNum	1.3.6.1.4.1.2011.6.139.11.1.16.1.62	Unsigned32	read-write	This object indicates the number of the RX chain. The default value is 4.
INT hw2gRadioProfileSmartAntennaEnable	1.3.6.1.4.1.2011.6.139.11.1.16.1.60	INTEGER	read-write	This object indicates the status of the smart antenna switch. The default value is 1.
U32 hw2gRadioProfileSmartAntennaHighPerThreshold	1.3.6.1.4.1.2011.6.139.11.1.16.1.67	Unsigned32	read-write	This object indicates the value of the smart antenna high per threshold. The default value is 80.
U32 hw2gRadioProfileSmartAntennaLowPerThreshold	1.3.6.1.4.1.2011.6.139.11.1.16.1.66	Unsigned32	read-write	This object indicates the value of the smart antenna low per threshold. The default value is 20.
U32 hw2gRadioProfileSmartAntennaTrainingInterval	1.3.6.1.4.1.2011.6.139.11.1.16.1.68	Unsigned32	read-write	This object indicates the value of the smart antenna training interval. The default value is 0.
U32 hw2gRadioProfileSmartAntennaTrainingMPDUNum	1.3.6.1.4.1.2011.6.139.11.1.16.1.69	Unsigned32	read-write	This object indicates the value of the smart antenna training MPDU number. The default value is 640.
U32 hw2gRadioProfileSmartAntThruputTrainThreshold	1.3.6.1.4.1.2011.6.139.11.1.16.1.70	Unsigned32	read-write	This object indicates the value of the smart antenna throughput trigger training threshold. The default value is 10.
hw2gRadioProfileTable	1.3.6.1.4.1.2011.6.139.11.1.16		not-accessible	This table is used to configure 2.4 GHz radio parameters, including physical radio parameters such as channel, power, antenna gain, and working mode, and bind air scan and RRM profiles.
U32 hw2gRadioProfileTxChainNum	1.3.6.1.4.1.2011.6.139.11.1.16.1.61	Unsigned32	read-write	This object indicates the number of the TX chain. The default value is 4.
INT hw2gRadioProfileUtmostPowerSwitch	1.3.6.1.4.1.2011.6.139.11.1.16.1.57	INTEGER	read-write	This object indicates the switch for the function of sending packets at maximum power, the default value is 2(auto).
OCT hw2gRadioRrmProfile	1.3.6.1.4.1.2011.6.139.11.1.16.1.54	OCTET STRING	read-write	This object indicates the bound RRM profile.
INT hw2gRadioRtsCtsMode	1.3.6.1.4.1.2011.6.139.11.1.16.1.41	INTEGER	read-write	This object indicates the RTS-CTS mode set for the specified radio profile. The default value is 3(from V2R8C10; The default value is 2 before V2R8C10.).
U32 hw2gRadioRtsCtsThreshold	1.3.6.1.4.1.2011.6.139.11.1.16.1.40	Unsigned32	read-write	This object indicates the request To Send/Clear To Send (RTS/CTS) threshold. If the length of a frame to be sent by the MAC Layer exceeds this threshold, an RTS frame needs to be sent before this frame. The default value is 1400(from V2R8C10; The default value is 2347 before V2R8C10.). It is expressed in bytes.
INT hw2GRadioRu26ToleranceSwitch	1.3.6.1.4.1.2011.6.139.11.1.16.1.76	INTEGER	read-write	This object indicates the status of ru26-tolerance switch. The default value is 2.
INT hw2gRadioShortPreamble	1.3.6.1.4.1.2011.6.139.11.1.16.1.11	INTEGER	read-write	This object indicates the preamble mode. The default value is 2.
U32 hw2gRadioVipUserBandwidthReservationRatio	1.3.6.1.4.1.2011.6.139.11.1.16.1.75	Unsigned32	read-write	This object indicates the proportion of reserved bandwidth for VIP users. The default value is 20.
INT hw2gRadioWifiLight	1.3.6.1.4.1.2011.6.139.11.1.16.1.44	INTEGER	read-write	This object indicates information reflected by the blinking frequency of the Wireless LED on an AP.
INT hw2gRadioWmmMandatorySwitch	1.3.6.1.4.1.2011.6.139.11.1.16.1.18	INTEGER	read-write	This object indicates the status of the mandatory WMM matching function. The default value is 1.
INT hw2gRadioWmmSwitch	1.3.6.1.4.1.2011.6.139.11.1.16.1.39	INTEGER	read-write	This object indicates the status of the WMM function. The default value is 2.
INT hw5gRadioAgileAntennaPolarSwitch	1.3.6.1.4.1.2011.6.139.11.1.17.1.69	INTEGER	read-write	This object indicates the status of the agile antenna polarization. The default value is 1.
OCT hw5gRadioAirScanProfile	1.3.6.1.4.1.2011.6.139.11.1.17.1.59	OCTET STRING	read-write	This object indicates the bound air scan profile.
INT hw5gRadioApEDCABEAckPolicy	1.3.6.1.4.1.2011.6.139.11.1.17.1.37	INTEGER	read-write	This object indicates the EDCA parameter AckPolicy for BE services on APs. The default value is 1.
U32 hw5gRadioApEDCABEAIFSN	1.3.6.1.4.1.2011.6.139.11.1.17.1.35	Unsigned32	read-write	This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for BE services on APs. The default value is 3.
U32 hw5gRadioApEDCABEECWmax	1.3.6.1.4.1.2011.6.139.11.1.17.1.33	Unsigned32	read-write	This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for BE services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 6.
U32 hw5gRadioApEDCABEECWmin	1.3.6.1.4.1.2011.6.139.11.1.17.1.34	Unsigned32	read-write	This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for BE services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 4.
U32 hw5gRadioApEDCABETXOPLimit	1.3.6.1.4.1.2011.6.139.11.1.17.1.36	Unsigned32	read-write	This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for BE services on APs. The default value is 0. The unit is 32 us.
INT hw5gRadioApEDCABKAckPolicy	1.3.6.1.4.1.2011.6.139.11.1.17.1.42	INTEGER	read-write	This object indicates the EDCA parameter AckPolicy for BK services on APs. The default value is 1.
U32 hw5gRadioApEDCABKAIFSN	1.3.6.1.4.1.2011.6.139.11.1.17.1.40	Unsigned32	read-write	This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for BK services on APs. The default value is 7..
U32 hw5gRadioApEDCABKECWmax	1.3.6.1.4.1.2011.6.139.11.1.17.1.38	Unsigned32	read-write	This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for BK services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 10.
U32 hw5gRadioApEDCABKECWmin	1.3.6.1.4.1.2011.6.139.11.1.17.1.39	Unsigned32	read-write	This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for BK services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 4.
U32 hw5gRadioApEDCABKTXOPLimit	1.3.6.1.4.1.2011.6.139.11.1.17.1.41	Unsigned32	read-write	This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for BK services on APs. The default value is 0. The unit is 32 us.
INT hw5gRadioApEDCAVideoAckPolicy	1.3.6.1.4.1.2011.6.139.11.1.17.1.32	INTEGER	read-write	This object indicates the EDCA parameter AckPolicy for video services on APs. The default value is 1.
U32 hw5gRadioApEDCAVideoAIFSN	1.3.6.1.4.1.2011.6.139.11.1.17.1.30	Unsigned32	read-write	This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for video services on APs. The default value is 1.
U32 hw5gRadioApEDCAVideoECWmax	1.3.6.1.4.1.2011.6.139.11.1.17.1.28	Unsigned32	read-write	This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for video services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 4.
U32 hw5gRadioApEDCAVideoECWmin	1.3.6.1.4.1.2011.6.139.11.1.17.1.29	Unsigned32	read-write	This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for video services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 3.
U32 hw5gRadioApEDCAVideoTXOPLimit	1.3.6.1.4.1.2011.6.139.11.1.17.1.31	Unsigned32	read-write	This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for video services on APs. The default value is 94. The unit is 32 us.
INT hw5gRadioApEDCAVoiceAckPolicy	1.3.6.1.4.1.2011.6.139.11.1.17.1.27	INTEGER	read-write	This object indicates the EDCA parameter AckPolicy for voice services on APs. The default value is 1.
U32 hw5gRadioApEDCAVoiceAIFSN	1.3.6.1.4.1.2011.6.139.11.1.17.1.25	Unsigned32	read-write	This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for voice services on APs. The default value is 1.
U32 hw5gRadioApEDCAVoiceECWmax	1.3.6.1.4.1.2011.6.139.11.1.17.1.23	Unsigned32	read-write	This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for voice services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 3.
U32 hw5gRadioApEDCAVoiceECWmin	1.3.6.1.4.1.2011.6.139.11.1.17.1.24	Unsigned32	read-write	This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for voice services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 2.
U32 hw5gRadioApEDCAVoiceTXOPLimit	1.3.6.1.4.1.2011.6.139.11.1.17.1.26	Unsigned32	read-write	This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for voice services on APs. The default value is 47. The unit is 32 us.
U32 hw5gRadioAutonavigationBeaconInterval	1.3.6.1.4.1.2011.6.139.11.1.17.1.78	Unsigned32	read-write	This object indicates a autonavigation beacon interval. The default value is 60. It is expressed in ms.
OCT hw5gRadioAutoOffServiceEndTime	1.3.6.1.4.1.2011.6.139.11.1.17.1.53	OCTET STRING	read-write	This object indicates the end time for disabling of the radio. The value is in the format of hh:mm:ss. NOTE? hh specifies the hour. The value is an integer that ranges from 0 to 23.? mm specifies the minute. The value is an integer that ranges from 0 to 59.? ss specifies the second. The value is an integer that ranges from 0 to 59.
OCT hw5gRadioAutoOffServiceStartTime	1.3.6.1.4.1.2011.6.139.11.1.17.1.52	OCTET STRING	read-write	This object indicates the start time for disabling the radio. The value is in the format of hh:mm:ss NOTE ? hh specifies the hour. The value is an integer that ranges from 0 to 23.? mm specifies the minute. The value is an integer that ranges from 0 to 59.? ss specifies the second. The value is an integer that ranges from 0 to 59..
INT hw5gRadioAutoOffServiceSwitch	1.3.6.1.4.1.2011.6.139.11.1.17.1.51	INTEGER	read-write	This object indicates the status of the scheduled radio disabling function. The default value is 1.
U32 hw5gRadioBeaconInterval	1.3.6.1.4.1.2011.6.139.11.1.17.1.6	Unsigned32	read-write	This object indicates a Beacon interval. The default value is 100. It is expressed in ms.
INT hw5gRadioBeamformingSwitch	1.3.6.1.4.1.2011.6.139.11.1.17.1.47	INTEGER	read-write	This object indicates the status of the beamforming function. The default value is 1.
INT hw5gRadioChannelSwitchAnnouncementSwitch	1.3.6.1.4.1.2011.6.139.11.1.17.1.49	INTEGER	read-write	This object indicates the status of the channel switchover announcement function. The default value is 2.
INT hw5gRadioChannelSwitchMode	1.3.6.1.4.1.2011.6.139.11.1.17.1.50	INTEGER	read-write	This object indicates the channel switch announcement mode. The default value is 1.
U32 hw5gRadioDot11aBasicRate	1.3.6.1.4.1.2011.6.139.11.1.17.1.18	Unsigned32	read-write	This object indicates the basic rate set of the 802.11bg protocol. The default value is 0x148 (6 Mbit/s/12 Mbit/s/24 Mbit/s) ? bit0: 1 Mbit/s? bit1: 2 Mbit/s? bit2: 5.5 Mbit/s? bit3: 6 Mbit/s? bit4: 9 Mbit/s? bit5: 11 Mbit/s? bit6: 12 Mbit/s? bit7: 18 Mbit/s? bit8: 24 Mbit/s? bit9: 36 Mbit/s? bit10: 48 Mbit/s? bit11: 54 Mbit/s.
U32 hw5gRadioDot11aSupportRate	1.3.6.1.4.1.2011.6.139.11.1.17.1.19	Unsigned32	read-write	This object indicates the supported rate set of the 802.11bg protocol. The default value is 0xFD8 (6 Mbit/s/9 Mbit/s/12 Mbit/s/18 Mbit/s/24 Mbit/s/36 Mbit/s/48 Mbit/s/54 Mbit/s).? bit0: 1 Mbit/s? bit1: 2 Mbit/s? bit2: 5.5 Mbit/s? bit3: 6 Mbit/s? bit4: 9 Mbit/s? bit5: 11 Mbit/s? bit6: 12 Mbit/s? bit7: 18 Mbit/s? bit8: 24 Mbit/s? bit9: 36 Mbit/s? bit10: 48 Mbit/s? bit11: 54 Mbit/s.
INT hw5gRadioDot11axGuardIntervalMode	1.3.6.1.4.1.2011.6.139.11.1.17.1.76	INTEGER	read-write	This object indicates the dot11ax GI mode. The default value is 1.
U32 hw5gRadioFragmentationThreshold	1.3.6.1.4.1.2011.6.139.11.1.17.1.12	Unsigned32	read-write	This object indicates the packet fragmentation threshold. The default value is 2346. It is expressed in bytes.
INT hw5gRadioGuardIntervalMode	1.3.6.1.4.1.2011.6.139.11.1.17.1.10	INTEGER	read-write	This object indicates the GI mode. The default value is 1.
MAC hw5gRadioHighwayBssid	1.3.6.1.4.1.2011.6.139.11.1.17.1.77	MacAddress	read-write	This object indicates the highway bssid.
U32 hw5gRadioHtAmpduMaxLengthExponent	1.3.6.1.4.1.2011.6.139.11.1.17.1.14	Unsigned32	read-write	This object indicates the maximum length of frames converged by an MPDU. The default value is 3 ? 0: 8191 bytes? 1: 16383 bytes? 2: 32767 bytes ? 3: 65535 bytes.
INT hw5gRadioHtAmpduSwitch	1.3.6.1.4.1.2011.6.139.11.1.17.1.13	INTEGER	read-write	This object indicates the status of the aggregation function. The default value is 2.
U32 hw5gRadioInterferenceAdjacentFrequencyThreshold	1.3.6.1.4.1.2011.6.139.11.1.17.1.56	Unsigned32	read-write	This object indicates the alarm threshold for adjacent-channel interference, namely, the percentage of the adjacent-channel interference power against the maximum power. The default value is 50.
INT hw5gRadioInterferenceDetectSwitch	1.3.6.1.4.1.2011.6.139.11.1.17.1.54	INTEGER	read-write	This object indicates the status of the user-by-user power control function. The default value is 1.
U32 hw5gRadioInterferenceIntraFrequencyThreshold	1.3.6.1.4.1.2011.6.139.11.1.17.1.55	Unsigned32	read-write	This object indicates the alarm threshold for co-channel interference, namely, the percentage of the co-channel interference power against the maximum power. The default value is 50.
U32 hw5gRadioInterferenceStationThreshold	1.3.6.1.4.1.2011.6.139.11.1.17.1.57	Unsigned32	read-write	This object indicates the alarm threshold for adjacent-channel interference. When the number of the STAs detected exceeds the specified alarm threshold, the AP reports alarms to the AC. The default value is 32.
U32 hw5gRadioMulticastRate	1.3.6.1.4.1.2011.6.139.11.1.17.1.20	Unsigned32	read-write	This object indicates the multicast rate. The default value is 0x8(6M).? bit0: 1 Mbit/s? bit1: 2 Mbit/s? bit2: 5.5 Mbit/s? bit3: 6 Mbit/s? bit4: 9 Mbit/s? bit5: 11 Mbit/s? bit6: 12 Mbit/s? bit7: 18 Mbit/s? bit8: 24 Mbit/s? bit9: 36 Mbit/s? bit10: 48 Mbit/s? bit11: 54 Mbit/s.
INT hw5gRadioPowerAutoAdjustSwitch	1.3.6.1.4.1.2011.6.139.11.1.17.1.46	INTEGER	read-write	This object indicates the status of the user-by-user power control function. The default value is 1.
OCT hw5gRadioProfileAutoOffTimeRange	1.3.6.1.4.1.2011.6.139.11.1.17.1.68	OCTET STRING	read-write	This object indicates the time range for disabling the radio.
I32 hw5gRadioProfileCCAThreshold	1.3.6.1.4.1.2011.6.139.11.1.17.1.70	Integer32	read-write	This object indicates the value of the CCA threshold. The default value is 0.
hw5gRadioProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.17.1		not-accessible	The index of this table is hw5gRadioProfileName.
hw5gRadioProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.16			Description.
INT hw5gRadioProfileMuMIMOEnable	1.3.6.1.4.1.2011.6.139.11.1.17.1.65	INTEGER	read-write	This object indicates the status of the MU MIMO switch. The default value is 1.
OCT hw5gRadioProfileName	1.3.6.1.4.1.2011.6.139.11.1.17.1.1	OCTET STRING	not-accessible	This object indicates the name of a 5G radio profile. It is the index of the table.
INT hw5gRadioProfileRadioType	1.3.6.1.4.1.2011.6.139.11.1.17.1.63	INTEGER	read-write	This object indicates the type of radio. The default value is 16.
ROW hw5gRadioProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.17.1.60	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.? ROWSTATUS_UNDEFINED: undefined? ROWSTATUS_ACTIVE: active? ROWSTATUS_NOTINSERVICE: notInService? ROWSTATUS_NOTREADY: notReady? ROWSTATUS_CREATEANDFLOW: createAndGo? ROWSTATUS_CREATEANDWAIT: createAndWait? ROWSTATUS_DESTROY: destroy.
U32 hw5gRadioProfileRxChainNum	1.3.6.1.4.1.2011.6.139.11.1.17.1.67	Unsigned32	read-write	This object indicates the number of the RX chain. The default value is 4.
INT hw5gRadioProfileSmartAntennaEnable	1.3.6.1.4.1.2011.6.139.11.1.17.1.64	INTEGER	read-write	This object indicates the status of the smart antenna switch. The default value is 1.
U32 hw5gRadioProfileSmartAntennaHighPerThreshold	1.3.6.1.4.1.2011.6.139.11.1.17.1.72	Unsigned32	read-write	This object indicates the value of the smart antenna high per threshold. The default value is 80.
U32 hw5gRadioProfileSmartAntennaLowPerThreshold	1.3.6.1.4.1.2011.6.139.11.1.17.1.71	Unsigned32	read-write	This object indicates the value of the smart antenna low per threshold. The default value is 20.
U32 hw5gRadioProfileSmartAntennaTrainingInterval	1.3.6.1.4.1.2011.6.139.11.1.17.1.73	Unsigned32	read-write	This object indicates the value of the smart antenna training interval. The default value is 0.
U32 hw5gRadioProfileSmartAntennaTrainingMPDUNum	1.3.6.1.4.1.2011.6.139.11.1.17.1.74	Unsigned32	read-write	This object indicates the value of the smart antenna training MPDU number. The default value is 640.
U32 hw5gRadioProfileSmartAntThruputTrainThreshold	1.3.6.1.4.1.2011.6.139.11.1.17.1.75	Unsigned32	read-write	This object indicates the value of the smart antenna throughput trigger training threshold. The default value is 10.
hw5gRadioProfileTable	1.3.6.1.4.1.2011.6.139.11.1.17		not-accessible	This table is used to configure 5 GHz radio parameters, including physical radio parameters such as channel, power, antenna gain, and working mode, and bind air scan profiles and RRM profiles.
U32 hw5gRadioProfileTxChainNum	1.3.6.1.4.1.2011.6.139.11.1.17.1.66	Unsigned32	read-write	This object indicates the number of the TX chain. The default value is 4.
INT hw5gRadioProfileUtmostPowerSwitch	1.3.6.1.4.1.2011.6.139.11.1.17.1.61	INTEGER	read-write	This object indicates the switch for the function of sending packets at maximum power, the default value is 2(auto).
OCT hw5gRadioRrmProfile	1.3.6.1.4.1.2011.6.139.11.1.17.1.58	OCTET STRING	read-write	This object indicates the bound RRM profile.
INT hw5gRadioRtsCtsMode	1.3.6.1.4.1.2011.6.139.11.1.17.1.45	INTEGER	read-write	This object indicates the RTS-CTS mode set for the specified radio profile. The default value is 3(from V2R8C10; The default value is 2 before V2R8C10.). In V200R019C10 and later versions, 2 is not supported and will switch to 3 automatically.
U32 hw5gRadioRtsCtsThreshold	1.3.6.1.4.1.2011.6.139.11.1.17.1.44	Unsigned32	read-write	This object indicates the request To Send/Clear To Send (RTS/CTS) threshold. If the length of a frame to be sent by the MAC Layer exceeds this threshold, an RTS frame needs to be sent before this frame. The default value is 1400 bytes(from V2R8C10; The default value is 2347 before V2R8C10.).
INT hw5GRadioRu26ToleranceSwitch	1.3.6.1.4.1.2011.6.139.11.1.17.1.80	INTEGER	read-write	This object indicates the status of ru26-tolerance switch. The default value is 2.
INT hw5gRadioShortPreamble	1.3.6.1.4.1.2011.6.139.11.1.17.1.11	INTEGER	read-write	This object indicates whether the short preamble is enabled. The default value is 2.
I32 hw5gRadioVhtAmpduMaxLengthExponent	1.3.6.1.4.1.2011.6.139.11.1.17.1.15	Integer32	read-write	This object indicates the maximum length of frames converged by an MPDU. The default value is 7 ? 0: 8191 bytes? 1: 16383 bytes? 2: 32767 bytes? 3: 65535 bytes? 4: 131071 bytes? 5: 262143 bytes? 6: 524287 bytes? 7: 1048575 bytes.
U32 hw5gRadioVhtAmsduMaxFrameNum	1.3.6.1.4.1.2011.6.139.11.1.17.1.17	Unsigned32	read-write	This object indicates the maximum number of sub-frames that can be aggregated into an A-MSDU. The default value is 2.
INT hw5gRadioVhtAmsduSwitch	1.3.6.1.4.1.2011.6.139.11.1.17.1.16	INTEGER	read-write	This object indicates the status of the A-MSDU aggregation function. The default value is 1.
OCT hw5gRadioVhtNssMapMaxMcs	1.3.6.1.4.1.2011.6.139.11.1.17.1.21	OCTET STRING	read-write	This object indicates the maximum MCS value for 802.11ac radios. The number of spatial flows is 8 and the maximum MCS value is 7-9. The format is x?x?x?x?x?x?x?x. The default value is 9?9?9?9?9?9?9?9.
U32 hw5gRadioVipUserBandwidthReservationRatio	1.3.6.1.4.1.2011.6.139.11.1.17.1.79	Unsigned32	read-write	This object indicates the proportion of reserved bandwidth for VIP users. The default value is 20.
INT hw5gRadioWifiLight	1.3.6.1.4.1.2011.6.139.11.1.17.1.48	INTEGER	read-write	This object indicates information reflected by the blinking frequency of the Wireless LED on an AP. The default value is 1 NOTE ? If Mesh is enabled on an AP, the Wireless indicator blinking frequency reflects the signal strength of the AP with the weakest signal among received signals from all neighboring APs.? If WDS is enabled on an AP, the the Wireless indicator blinking frequency reflects the signal strength of the connected WDS AP.? For a Leaf AP, the Wireless indicator blinking frequency reflects the signal strength of the connected Middle AP.? For a Middle AP, the Wireless indicator blinking frequency reflects the signal strength of the connected Root AP.? For a root AP, the Wireless indicator blinking frequency reflects the signal strength of the connected Middle AP with the weakest signal.? If WDS or Mesh is not enabled on an AP, the Wireless indicator blinking frequency reflects the service traffic volume on the radio.
INT hw5gRadioWmmMandatorySwitch	1.3.6.1.4.1.2011.6.139.11.1.17.1.22	INTEGER	read-write	This object indicates the status of the mandatory WMM matching function. The default value is 1.
INT hw5gRadioWmmSwitch	1.3.6.1.4.1.2011.6.139.11.1.17.1.43	INTEGER	read-write	This object indicates the status of the WMM function. The default value is 2.
INT hwAirScanChannelSet	1.3.6.1.4.1.2011.6.139.11.1.19.1.4	INTEGER	read-write	This object indicates the scan channel set. The default value is 1.
INT hwAirScanEnhancement	1.3.6.1.4.1.2011.6.139.11.1.19.1.9	INTEGER	read-write	This object indicates the scan enhancement status. The default value is disable.
U32 hwAirScanInterval	1.3.6.1.4.1.2011.6.139.11.1.19.1.3	Unsigned32	read-write	This object indicates the scan interval. The default value is 10000. The unit is 1ms.
U32 hwAirScanPeriod	1.3.6.1.4.1.2011.6.139.11.1.19.1.2	Unsigned32	read-write	This object indicates the air scan period. The default value is 60. It is expressed in ms.
hwAirScanProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.19.1		not-accessible	The index of this table is hwAirScanProfileName.
hwAirScanProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.18			Description.
OCT hwAirScanProfileName	1.3.6.1.4.1.2011.6.139.11.1.19.1.1	OCTET STRING	not-accessible	This object indicates the name of an air scan profile. It is the index of the table.
hwAirScanProfileTable	1.3.6.1.4.1.2011.6.139.11.1.19		not-accessible	This table is used to configure air scan intervals, duration, and scan channel sets.
ROW hwAirScanProfilRowStatus	1.3.6.1.4.1.2011.6.139.11.1.19.1.5	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.? ROWSTATUS_UNDEFINED: undefined? ROWSTATUS_ACTIVE: active? ROWSTATUS_NOTINSERVICE: notInService? ROWSTATUS_NOTREADY: notReady? ROWSTATUS_CREATEANDFLOW: createAndGo? ROWSTATUS_CREATEANDWAIT: createAndWait? ROWSTATUS_DESTROY: destroy.
INT hwAirScanSwitch	1.3.6.1.4.1.2011.6.139.11.1.19.1.8	INTEGER	read-write	This object indicates the scan switch status. The default value is enable.
INT hwAirScanVideoAware	1.3.6.1.4.1.2011.6.139.11.1.19.1.7	INTEGER	read-write	This object indicates the video aware set. The default value is enable.
INT hwAirScanVoiceAware	1.3.6.1.4.1.2011.6.139.11.1.19.1.6	INTEGER	read-write	This object indicates the voice aware set. The default value is enable.
hwApAuthObjects	1.3.6.1.4.1.2011.6.139.11.1.2
hwApAuthObjectsGroups	1.3.6.1.4.1.2011.6.139.11.2.2.2			Description.
hwAPBranchGroupFileEntry	1.3.6.1.4.1.2011.6.139.11.1.88.2.1		not-accessible	The indexes of this table are hwBranchGroupName and hwWlanApMac.
INT hwAPBranchGroupFileStatus	1.3.6.1.4.1.2011.6.139.11.1.88.2.1.1	INTEGER	read-only	This object indicates the branch group file load status.
hwAPBranchGroupFileTable	1.3.6.1.4.1.2011.6.139.11.1.88.2		not-accessible	This table is used to get branh group file load status.
hwAPGroupCardEntry	1.3.6.1.4.1.2011.6.139.11.1.74.1		not-accessible	Description.
hwAPGroupCardGroups	1.3.6.1.4.1.2011.6.139.11.2.2.67			Description.
hwAPGroupCardTable	1.3.6.1.4.1.2011.6.139.11.1.74		not-accessible	Description.
OCT hwAPGroupCardWiredPortProfile	1.3.6.1.4.1.2011.6.139.11.1.74.1.7	OCTET STRING	read-write	Description.
hwAPGroupEntry	1.3.6.1.4.1.2011.6.139.11.1.3.1		not-accessible	The index of this table is hwAPGroupName.
hwAPGroupGroups	1.3.6.1.4.1.2011.6.139.11.2.2.3			Description.
OCT hwAPGroupName	1.3.6.1.4.1.2011.6.139.11.1.3.1.1	OCTET STRING	not-accessible	This object indicates the AP group name. It is the index of the table.
INT hwAPGroupRadioCalibrateFlexibleRadio	1.3.6.1.4.1.2011.6.139.11.1.5.1.30	INTEGER	read-write	Description.
hwAPGroupRadioEntry	1.3.6.1.4.1.2011.6.139.11.1.5.1		not-accessible	Indexes of this table are hwAPGroupName and hwAPGrpRadioId.
hwAPGroupRadioGroups	1.3.6.1.4.1.2011.6.139.11.2.2.5			Description.
hwAPGroupRadioTable	1.3.6.1.4.1.2011.6.139.11.1.5		not-accessible	This table is used to bind a 5G radio profile, Mesh profile, WDS profile, WIDS profile, location profile, or spectrum profile to an AP group or unbind a 5G radio profile, Mesh profile, WDS profile, WIDS profile, location profile, or spectrum profile from an AP group..
hwAPGroupTable	1.3.6.1.4.1.2011.6.139.11.1.3		not-accessible	This table is used to create or delete AP groups and bind or unbind the AP system profile, 2G radio profile, and domain profile.
hwAPGroupVapEntry	1.3.6.1.4.1.2011.6.139.11.1.6.1		not-accessible	Indexes of this table are hwAPGroupName, hwAPGrpRadioId, and hwAPGrpWlanId.
hwAPGroupVapGroups	1.3.6.1.4.1.2011.6.139.11.2.2.6			Description.
hwAPGroupVapTable	1.3.6.1.4.1.2011.6.139.11.1.6		not-accessible	This table is used to create VAPs in an AP group.
hwAPGroupWiredPortEntry	1.3.6.1.4.1.2011.6.139.11.1.4.1		not-accessible	Indexes of this table are hwAPGroupName, hwAPGrpWPInterfaceType, and hwAPGrpWPInterfaceNum.
hwAPGroupWiredPortGroups	1.3.6.1.4.1.2011.6.139.11.2.2.4			Description.
hwAPGroupWiredPortTable	1.3.6.1.4.1.2011.6.139.11.1.4		not-accessible	This table is the AP wired port profile table.This table is used to bind a wired port profile to an AP group or unbind a wired port profile from an AP group.
INT hwAPGrpAPIPVersion	1.3.6.1.4.1.2011.6.139.11.1.3.1.15	INTEGER	read-write	This object indicates the IP Version of AP.
U32 hwAPGrpApNum	1.3.6.1.4.1.2011.6.139.11.1.3.1.13	Unsigned32	read-only	This object indicates the ap numbers of Group.
OCT hwAPGrpAPSystemProfile	1.3.6.1.4.1.2011.6.139.11.1.3.1.2	OCTET STRING	read-write	This object indicates the system profile to which AP groups are bound. The default value is default.
INT hwAPGrpAutoBandwidthSelectSwitch	1.3.6.1.4.1.2011.6.139.11.1.5.1.31	INTEGER	read-write	This object indicates the status of the automatic bandwidth selection function. The default value is 1.
INT hwAPGrpAutoChannelSelectSwitch	1.3.6.1.4.1.2011.6.139.11.1.5.1.25	INTEGER	read-write	This object indicates the status of the automatic channel selection function. The default value is 2.
INT hwAPGrpAutoTxPowerSelectSwitch	1.3.6.1.4.1.2011.6.139.11.1.5.1.26	INTEGER	read-write	This object indicates the status of the automatic power selection function. The default value is 2.
OCT hwAPGrpBleProfile	1.3.6.1.4.1.2011.6.139.11.1.3.1.7	OCTET STRING	read-write	This object indicates the bound BLE profile.
INT hwAPGrpCardConnType	1.3.6.1.4.1.2011.6.139.11.1.74.1.8	INTEGER	read-write	Description.
U32 hwAPGrpCardIndex	1.3.6.1.4.1.2011.6.139.11.1.74.1.1	Unsigned32	not-accessible	Description.
U32 hwAPGrpCardNetExtPort	1.3.6.1.4.1.2011.6.139.11.1.74.1.11	Unsigned32	read-write	Description.
U32 hwAPGrpCardNetPort	1.3.6.1.4.1.2011.6.139.11.1.74.1.10	Unsigned32	read-write	Description.
INT hwAPGrpCardNetProtocolType	1.3.6.1.4.1.2011.6.139.11.1.74.1.9	INTEGER	read-write	Description.
U32 hwAPGrpCardNetTCPPort	1.3.6.1.4.1.2011.6.139.11.1.74.1.6	Unsigned32	read-write	Description.
U32 hwAPGrpCardNetUDPPort	1.3.6.1.4.1.2011.6.139.11.1.74.1.4	Unsigned32	read-write	Description.
OCT hwAPGrpCardProfile	1.3.6.1.4.1.2011.6.139.11.1.74.1.3	OCTET STRING	read-write	Description.
OCT hwAPGrpCardSerialProfile	1.3.6.1.4.1.2011.6.139.11.1.74.1.2	OCTET STRING	read-write	Description.
OCT hwAPGrpDomainName	1.3.6.1.4.1.2011.6.139.11.1.3.1.11	OCTET STRING	read-write	This object indicates the domain name of Group.
OCT hwAPGrpDomainProfile	1.3.6.1.4.1.2011.6.139.11.1.3.1.4	OCTET STRING	read-write	This object indicates the domain profile to which AP groups are bound. The default value is default.
OCT hwAPGrpHighwayProfileName	1.3.6.1.4.1.2011.6.139.11.1.3.1.14	OCTET STRING	read-write	This object indicates the UUID String value of Group.
ROW hwAPGrpIoTRowStatus	1.3.6.1.4.1.2011.6.139.11.1.74.1.5	RowStatus	read-write	Description.
OCT hwAPGrpLocation	1.3.6.1.4.1.2011.6.139.11.1.3.1.12	OCTET STRING	read-write	This object indicates the ap location of Group.
OCT hwAPGrpLocationProfile	1.3.6.1.4.1.2011.6.139.11.1.5.1.6	OCTET STRING	read-write	This object indicates the bound location profile.
OCT hwAPGrpMeshProfile	1.3.6.1.4.1.2011.6.139.11.1.5.1.3	OCTET STRING	read-write	This object indicates the bound Mesh profile.
OCT hwAPGrpMeshWhitelistProfile	1.3.6.1.4.1.2011.6.139.11.1.5.1.10	OCTET STRING	read-write	This object indicates the bound whitelist profile.
OCT hwAPGrpRadio2gProfile	1.3.6.1.4.1.2011.6.139.11.1.5.1.9	OCTET STRING	read-write	This object indicates the 2G radio profile to which AP groups are bound. The default value is default.
OCT hwAPGrpRadio5gProfile	1.3.6.1.4.1.2011.6.139.11.1.5.1.2	OCTET STRING	read-write	This object indicates the bound 5G radio profile.
I32 hwAPGrpRadioAntennaGain	1.3.6.1.4.1.2011.6.139.11.1.5.1.16	Integer32	read-write	This object indicates antenna gains. The default value 0xFF indicates that the default gain of an AP is used. It is expressed in dB. Default gains vary with different types of APs.
INT hwAPGrpRadioBandwidth	1.3.6.1.4.1.2011.6.139.11.1.5.1.14	INTEGER	read-write	This object indicate a bandwidth. The default value is 1.
U32 hwAPGrpRadioChannel	1.3.6.1.4.1.2011.6.139.11.1.5.1.13	Unsigned32	read-write	This object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 196 (with a separation interval of 4).
U32 hwAPGrpRadioCoverageDistance	1.3.6.1.4.1.2011.6.139.11.1.5.1.17	Unsigned32	read-write	This object indicates a radio coverage distance. The default value is 3. The unit is 0.1 km.
U32 hwAPGrpRadioEirp	1.3.6.1.4.1.2011.6.139.11.1.5.1.15	Unsigned32	read-write	This object indicates a power value. The default value is 127. The configuration is saved but the actual power is determined by the maximum power supported by the AP.
INT hwAPGrpRadioFrequency	1.3.6.1.4.1.2011.6.139.11.1.5.1.19	INTEGER	read-write	This object indicates the setting of the frequency band for radio 0. The default value is 1. 1: frequency2G, 2: frequency5G.
U32 hwAPGrpRadioId	1.3.6.1.4.1.2011.6.139.11.1.5.1.1	Unsigned32	not-accessible	This object indicates the radio ID. It is the index of the table.
ROW hwAPGrpRadioRowStatus	1.3.6.1.4.1.2011.6.139.11.1.5.1.8	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.
U32 hwAPGrpRadioSecondChannel	1.3.6.1.4.1.2011.6.139.11.1.5.1.24	Unsigned32	read-write	This object indicates a radio-frequency channel. The value ranges from 42,58,106,122,138,155.
INT hwAPGrpRadioSwitch	1.3.6.1.4.1.2011.6.139.11.1.5.1.12	INTEGER	read-write	This object indicates the name of a 2G radio profile. It is the index of the table.
INT hwAPGrpRadioWorkMode	1.3.6.1.4.1.2011.6.139.11.1.5.1.18	INTEGER	read-write	This object indicates the radio working mode. The default value is 1.
INT hwAPGrpReferenceDataAnalysis	1.3.6.1.4.1.2011.6.139.11.1.5.1.32	INTEGER	read-write	This object indicates the status of the referencing data-analysis function. The default value is 2.
ROW hwAPGrpRowStatus	1.3.6.1.4.1.2011.6.139.11.1.3.1.5	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ROWSTATUS_ACTIVE: active ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy
INT hwAPGrpSfnRoamBeaconSwitch	1.3.6.1.4.1.2011.6.139.11.1.5.1.28	INTEGER	read-write	Description.
I32 hwAPGrpSfnRoamCtsDelay	1.3.6.1.4.1.2011.6.139.11.1.5.1.29	Integer32	read-write	Description.
INT hwAPGrpSfnRoamCtsSwitch	1.3.6.1.4.1.2011.6.139.11.1.5.1.27	INTEGER	read-write	Description.
OCT hwAPGrpSiteCode	1.3.6.1.4.1.2011.6.139.11.1.3.1.10	OCTET STRING	read-write	This object indicates the site code of Group.
INT hwAPGrpSpectrumAnalysisSwitch	1.3.6.1.4.1.2011.6.139.11.1.5.1.20	INTEGER	read-write	This object indicates the status of the spectrum analysis function. The default value is 1.
OCT hwAPGrpUUIDHex	1.3.6.1.4.1.2011.6.139.11.1.3.1.9	OCTET STRING	read-write	This object indicates the UUID Hex value of Group.
OCT hwAPGrpUUIDString	1.3.6.1.4.1.2011.6.139.11.1.3.1.8	OCTET STRING	read-write	This object indicates the UUID String value of Group.
OCT hwAPGrpVapProfile	1.3.6.1.4.1.2011.6.139.11.1.6.1.2	OCTET STRING	read-write	This object indicates the bound VAP profile.
ROW hwAPGrpVapRowStatus	1.3.6.1.4.1.2011.6.139.11.1.6.1.3	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
U32 hwAPGrpVapServiceVlan	1.3.6.1.4.1.2011.6.139.11.1.6.1.4	Unsigned32	read-write	This object indicates the service VLAN for the VAP. The invalid value is 0.
OCT hwAPGrpVapVlanPool	1.3.6.1.4.1.2011.6.139.11.1.6.1.5	OCTET STRING	read-write	This object indicates the VLAN pool to which the VAP is bound.
OCT hwAPGrpWdsProfile	1.3.6.1.4.1.2011.6.139.11.1.5.1.4	OCTET STRING	read-write	This object indicates the bound WDS profile.
OCT hwAPGrpWdsWhitelistProfile	1.3.6.1.4.1.2011.6.139.11.1.5.1.11	OCTET STRING	read-write	This object indicates the bound whitelist profile.
U32 hwAPGrpWidsAttackDetectEnBmp	1.3.6.1.4.1.2011.6.139.11.1.5.1.22	Unsigned32	read-write	This object indicates the bit map of the brute force attack switch. bit0:weak-iv, bit1:spoof, bit2:flood, bit3:wpa-psk, bit4:wpa2-psk, bit5:wapi-psk, bit6:wep-psk.
INT hwAPGrpWidsDeviceDetectSwitch	1.3.6.1.4.1.2011.6.139.11.1.5.1.21	INTEGER	read-write	This object indicates the status of the device detection function. The default value is 1.
OCT hwAPGrpWidsProfile	1.3.6.1.4.1.2011.6.139.11.1.3.1.6	OCTET STRING	read-write	This object indicates the bound WIDS profile.
INT hwAPGrpWidsRogueContainSwitch	1.3.6.1.4.1.2011.6.139.11.1.5.1.23	INTEGER	read-write	This object indicates the status of the device detection function. The default value is 1.
U32 hwAPGrpWlanId	1.3.6.1.4.1.2011.6.139.11.1.6.1.1	Unsigned32	not-accessible	This object indicates the WLAN ID. It is the index of the table.
U32 hwAPGrpWPInterfaceNum	1.3.6.1.4.1.2011.6.139.11.1.4.1.2	Unsigned32	not-accessible	This object indicates the interface index.
INT hwAPGrpWPInterfaceType	1.3.6.1.4.1.2011.6.139.11.1.4.1.1	INTEGER	not-accessible	This object indicates the interface type. It is the index of the table.
OCT hwAPGrpWPProfile	1.3.6.1.4.1.2011.6.139.11.1.4.1.3	OCTET STRING	read-write	This object indicates the bound wired port profile.
ROW hwAPGrpWPRowStatus	1.3.6.1.4.1.2011.6.139.11.1.4.1.4	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEAN.
INT hwAPPortLinkProfileAdminStatus	1.3.6.1.4.1.2011.6.139.11.1.15.1.13	INTEGER	read-write	This object indicates whether to enable port shutdown.The default value is 2.
INT hwAPPortLinkProfileCrcAlarmEnable	1.3.6.1.4.1.2011.6.139.11.1.15.1.4	INTEGER	read-write	This object indicates the status of the CRC error alarm function. The default value is 1.
U32 hwAPPortLinkProfileCrcAlarmResumeThreshold	1.3.6.1.4.1.2011.6.139.11.1.15.1.6	Unsigned32	read-write	This object indicates a CRC error alarm clearing threshold. The default value is 20. The unit is 1/10000.
U32 hwAPPortLinkProfileCrcAlarmThreshold	1.3.6.1.4.1.2011.6.139.11.1.15.1.5	Unsigned32	read-write	This object indicates a CRC error alarm threshold. The default value is 50. The unit is 1/10000.
hwAPPortLinkProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.15.1		not-accessible	The index of this table is hwAPPortLinkProfileName.
hwAPPortLinkProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.14			Description.
INT hwAPPortLinkProfileLldpdot3PowerFormat	1.3.6.1.4.1.2011.6.139.11.1.15.1.15	INTEGER	read-write	Description.
U32 hwAPPortLinkProfileLldpdot3TlvType	1.3.6.1.4.1.2011.6.139.11.1.15.1.14	Unsigned32	read-write	Description.
INT hwAPPortLinkProfileLldpEnable	1.3.6.1.4.1.2011.6.139.11.1.15.1.2	INTEGER	read-write	This object indicates the status of the LLDP function. The default value is 2.
INT hwAPPortLinkProfileLldpLegacyPowerCapability	1.3.6.1.4.1.2011.6.139.11.1.15.1.17	INTEGER	read-write	This object indicates whether to enable the Power Capability.The default value is 1.
U32 hwAPPortLinkProfileLldpLegacyTlvType	1.3.6.1.4.1.2011.6.139.11.1.15.1.16	Unsigned32	read-write	Description.
U32 hwAPPortLinkProfileLldpTlvType	1.3.6.1.4.1.2011.6.139.11.1.15.1.3	Unsigned32	read-write	This object indicates the types of TLVs that can be advertised from an AP's wired port. The default value is all(31) ? 0: invalid ? bit0: management-address ? bit1: port-description ? bit2: system-capability ? bit3: system-description ? bit4: system-name.
OCT hwAPPortLinkProfileName	1.3.6.1.4.1.2011.6.139.11.1.15.1.1	OCTET STRING	not-accessible	This object indicates the name of an AP wired port link profile.
INT hwAPPortLinkProfilePoeForcePowerSwitch	1.3.6.1.4.1.2011.6.139.11.1.15.1.10	INTEGER	read-write	This object indicates whether to enable forcible PoE power supply on an interface.The default value is 1.
INT hwAPPortLinkProfilePoeLegacySwitch	1.3.6.1.4.1.2011.6.139.11.1.15.1.11	INTEGER	read-write	This object indicates whether to enable the PSE to check compatibility of the connected PDs.The default value is 1.
OCT hwAPPortLinkProfilePoeOffTimeRange	1.3.6.1.4.1.2011.6.139.11.1.15.1.12	OCTET STRING	read-write	This object indicates whether to make a configured PoE power-off time range effective on interfaces.
INT hwAPPortLinkProfilePoePriority	1.3.6.1.4.1.2011.6.139.11.1.15.1.9	INTEGER	read-write	This object indicates the power priority of PoE interfaces.The default value is 3.
INT hwAPPortLinkProfilePoeSwitch	1.3.6.1.4.1.2011.6.139.11.1.15.1.8	INTEGER	read-write	This object indicates whether to enable the PoE function on the interface.The default value is 2.
ROW hwAPPortLinkProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.15.1.7	RowStatus	read-create	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE:notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.
U32 hwAPPortLinkProfileSpeed	1.3.6.1.4.1.2011.6.139.11.1.15.1.18	Unsigned32	read-write	Configure the speed of AP interface.
hwAPPortLinkProfileTable	1.3.6.1.4.1.2011.6.139.11.1.15		not-accessible	This table is used to create or delete an AP wired port link profile and configure parameters.
U32 hwApProfAlarmRestrictionPeriod	1.3.6.1.4.1.2011.6.139.11.1.12.1.26	Unsigned32	read-write	This object indicates the alarm suppression period. The default value is 60 seconds.
INT hwApProfAlarmRestrictionSwitch	1.3.6.1.4.1.2011.6.139.11.1.12.1.25	INTEGER	read-write	This object indicates the status of the alarm suppression switch. The default value is 2.
INT hwApProfAntennaOutputMode	1.3.6.1.4.1.2011.6.139.11.1.12.1.48	INTEGER	read-write	Description.
IP hwApProfBackupLinkIPv4	1.3.6.1.4.1.2011.6.139.11.1.12.1.63	IpAddress	read-write	This object indicates the IP address of the backup AC.
OCT hwApProfBackupLinkIPv6	1.3.6.1.4.1.2011.6.139.11.1.12.1.64	OCTET STRING	read-write	This object indicates the IPv6 address of the backup AC.
U32 hwApProfBcSuppresionAutoDetectThreshold	1.3.6.1.4.1.2011.6.139.11.1.12.1.85	Unsigned32	read-write	This object indicates the value of broadcast value .The default value is 256.
INT hwApProfBroadcastSuppressionAllEnable	1.3.6.1.4.1.2011.6.139.11.1.12.1.75	INTEGER	read-write	This object indicates whether to enable all the broadcast suppression.The default value is 2.
INT hwApProfBroadcastSuppressionArpEnable	1.3.6.1.4.1.2011.6.139.11.1.12.1.67	INTEGER	read-write	This object indicates whether to enable the arp broadcast suppression.The default value is 2.
U32 hwApProfBroadcastSuppressionArpThreshold	1.3.6.1.4.1.2011.6.139.11.1.12.1.68	Unsigned32	read-write	This object indicates the threshold of arp broadcast suppression. The default value is 256.
INT hwApProfBroadcastSuppressionIgmpEnable	1.3.6.1.4.1.2011.6.139.11.1.12.1.69	INTEGER	read-write	This object indicates whether to enable the igmp broadcast suppression.The default value is 2.
U32 hwApProfBroadcastSuppressionIgmpThreshold	1.3.6.1.4.1.2011.6.139.11.1.12.1.70	Unsigned32	read-write	This object indicates the threshold of igmp broadcast suppression. The default value is 256.
INT hwApProfBroadcastSuppressionNdEnable	1.3.6.1.4.1.2011.6.139.11.1.12.1.71	INTEGER	read-write	This object indicates whether to enable the nd broadcast suppression.The default value is 2.
U32 hwApProfBroadcastSuppressionNdThreshold	1.3.6.1.4.1.2011.6.139.11.1.12.1.72	Unsigned32	read-write	This object indicates the threshold of nd broadcast suppression. The default value is 256.
INT hwApProfBroadcastSuppressionOtherEnable	1.3.6.1.4.1.2011.6.139.11.1.12.1.73	INTEGER	read-write	This object indicates whether to enable the other broadcast suppression.The default value is 2.
U32 hwApProfBroadcastSuppressionOtherThreshold	1.3.6.1.4.1.2011.6.139.11.1.12.1.74	Unsigned32	read-write	This object indicates the threshold of other broadcast suppression. The default value is 256.
INT hwApProfCapwapDtlsDataSwitch	1.3.6.1.4.1.2011.6.139.11.1.12.1.76	INTEGER	read-write	This object indicates the status of the DTLS function of data-link. The default value is 3.
INT hwApProfCardConnectType	1.3.6.1.4.1.2011.6.139.11.1.12.1.82	INTEGER	read-write	Description.
INT hwApProfChannelLoadMode	1.3.6.1.4.1.2011.6.139.11.1.11.1.8	INTEGER	read-write	This object indicates channel lode mode. The default value is outdoor.
INT hwApProfConsoleBLEMode	1.3.6.1.4.1.2011.6.139.11.1.12.1.88	INTEGER	read-write	This object indicates the type of ble console .The default value is 2.
INT hwApProfConsoleSwitch	1.3.6.1.4.1.2011.6.139.11.1.12.1.21	INTEGER	read-write	This object indicates whether to enable the console. The default value is 2.
U32 hwApProfCpuUsageThreshold	1.3.6.1.4.1.2011.6.139.11.1.12.1.18	Unsigned32	read-write	This object indicates the CPU usage alarm threshold of an AP. The default value is 90. It is expressed in percentage.
INT hwApProfDhcpv4Option12	1.3.6.1.4.1.2011.6.139.11.1.12.1.84	INTEGER	read-write	This object indicates the type of dhcpve option12 .The default value is 1.
U32 hwApProfDiskUsageThreshold	1.3.6.1.4.1.2011.6.139.11.1.12.1.89	Unsigned32	read-write	This object indicates the AP disk usage rate alarm threshold. The default value is 95.
U32 hwApProfDynamicBlackListAgingTime	1.3.6.1.4.1.2011.6.139.11.1.12.1.47	Unsigned32	read-write	This object indicates the aging time of the dynamic blacklist entries. The default value is 300.
INT hwApProfEapResponseMode	1.3.6.1.4.1.2011.6.139.11.1.12.1.34	INTEGER	read-write	This object indicates the EAP Response packet conversion mode. The default value is 4.
INT hwApProfEapResponseTransform	1.3.6.1.4.1.2011.6.139.11.1.12.1.35	INTEGER	read-write	This object indicates the EAP Response packet conversion mode. The default value is 1.
MAC hwApProfEapResponseUnicastMac	1.3.6.1.4.1.2011.6.139.11.1.12.1.36	MacAddress	read-write	This object indicates that EAP Response packets are converted to those with specific MAC addresses.
INT hwApProfEapStartMode	1.3.6.1.4.1.2011.6.139.11.1.12.1.31	INTEGER	read-write	This object indicates the EAP Start packet conversion mode. The default value is 2.
INT hwApProfEapStartTransform	1.3.6.1.4.1.2011.6.139.11.1.12.1.32	INTEGER	read-write	This object indicates the EAP Start packet conversion mode. The default value is 1.
MAC hwApProfEapStartUnicastMac	1.3.6.1.4.1.2011.6.139.11.1.12.1.33	MacAddress	read-write	This object indicates that EAP Start packets are converted to those with specific MAC addresses.
U32 hwApProfHighTempApEnvironmentThreshold	1.3.6.1.4.1.2011.6.139.11.1.12.1.97	Unsigned32	read-write	Description.
U32 hwApProfHighTempCpuThreshold	1.3.6.1.4.1.2011.6.139.11.1.12.1.98	Unsigned32	read-write	Description.
U32 hwApProfHighTempNpThreshold	1.3.6.1.4.1.2011.6.139.11.1.12.1.99	Unsigned32	read-write	Description.
U32 hwApProfHighTempThreshold	1.3.6.1.4.1.2011.6.139.11.1.12.1.11	Unsigned32	read-write	This object indicates the high temperature alarm threshold on an AP. The default value 0xFFFFFFFF indicates the system threshold of the AP NOTE System thresholds vary with different AP types. For details, see AP device information.
U32 hwAPProfIGMPSnoopingGroupBandwidth	1.3.6.1.4.1.2011.6.139.11.1.80.1.4	Unsigned32	read-write	Description.
IP hwAPProfIGMPSnoopingGroupEndGroupAddr	1.3.6.1.4.1.2011.6.139.11.1.80.1.3	IpAddress	read-write	Description.
hwApProfIGMPSnoopingGroupEntry	1.3.6.1.4.1.2011.6.139.11.1.80.1		not-accessible	Description.
U32 hwAPProfIGMPSnoopingGroupIndex	1.3.6.1.4.1.2011.6.139.11.1.80.1.1	Unsigned32	not-accessible	Description.
ROW hwAPProfIGMPSnoopingGroupRowStatus	1.3.6.1.4.1.2011.6.139.11.1.80.1.5	RowStatus	read-write	Description.
IP hwAPProfIGMPSnoopingGroupStartGroupAddr	1.3.6.1.4.1.2011.6.139.11.1.80.1.2	IpAddress	read-write	Description.
hwApProfIGMPSnoopingGroupTable	1.3.6.1.4.1.2011.6.139.11.1.80		not-accessible	Description.
INT hwApProfKeepServiceSwitch	1.3.6.1.4.1.2011.6.139.11.1.12.1.27	INTEGER	read-write	This object indicates whether to enable the offline service retaining function. The default value is 2.
OCT hwApProfLedOffTimeRange	1.3.6.1.4.1.2011.6.139.11.1.12.1.65	OCTET STRING	read-write	This object indicates whether to make a configured Led off time range effective.
INT hwApProfLedSwitch	1.3.6.1.4.1.2011.6.139.11.1.12.1.5	INTEGER	read-write	This object indicates whether to enable the AP's LED indicator. The default value is 2.
INT hwApProfLldpAdminStatus	1.3.6.1.4.1.2011.6.139.11.1.12.1.38	INTEGER	read-write	This object indicates the operation mode of LLDP. The default value is 1.
U32 hwApProfLldpInterval	1.3.6.1.4.1.2011.6.139.11.1.12.1.41	Unsigned32	read-write	This object indicates the interval at which LLDP packets are sent. The default value is 30 seconds.
INT hwApProfLldpReportEnable	1.3.6.1.4.1.2011.6.139.11.1.12.1.83	INTEGER	read-write	This object indicates whether to enable the lldp report .The default value is 1.
U32 hwApProfLldpReportInterval	1.3.6.1.4.1.2011.6.139.11.1.12.1.42	Unsigned32	read-write	This object indicates the interval at which LLDP packets are reported. The default value is 30 seconds.
U32 hwApProfLldpRestartDelay	1.3.6.1.4.1.2011.6.139.11.1.12.1.37	Unsigned32	read-write	This object indicates the delay for re-enabling LLDP. The default value is 2. It is expressed in seconds.
U32 hwApProfLldpRetransDelay	1.3.6.1.4.1.2011.6.139.11.1.12.1.39	Unsigned32	read-write	This object indicates the message retransmitting delay. The default value is 2. It is expressed in seconds.
U32 hwApProfLldpRetransHoldMultiplier	1.3.6.1.4.1.2011.6.139.11.1.12.1.40	Unsigned32	read-write	This object indicates the hold time multiplier of device information on neighbors (cardinal number is the interval time). The default value is 4.
INT hwApProfLogRecordLevel	1.3.6.1.4.1.2011.6.139.11.1.12.1.22	INTEGER	read-write	This object indicates the log backup level. The default value is 7.
IP hwApProfLogServerIp	1.3.6.1.4.1.2011.6.139.11.1.12.1.23	IpAddress	read-write	This object indicates the IP address of the log server.
OCT hwApProfLogServerIpv6	1.3.6.1.4.1.2011.6.139.11.1.12.1.24	OCTET STRING	read-write	This object indicates the IPv6 address of the log server.
U32 hwApProfLogServerPort	1.3.6.1.4.1.2011.6.139.11.1.12.1.90	Unsigned32	read-write	This object indicates syslog server port. The default value is 514.
I32 hwApProfLowTempApEnvironmentThreshold	1.3.6.1.4.1.2011.6.139.11.1.12.1.100	Integer32	read-write	Description.
I32 hwApProfLowTempCpuThreshold	1.3.6.1.4.1.2011.6.139.11.1.12.1.101	Integer32	read-write	Description.
I32 hwApProfLowTempNpThreshold	1.3.6.1.4.1.2011.6.139.11.1.12.1.102	Integer32	read-write	Description.
I32 hwApProfLowTempThreshold	1.3.6.1.4.1.2011.6.139.11.1.12.1.12	Integer32	read-write	This object indicates the low temperature alarm threshold on an AP. The default value 0xFFFF indicates the system threshold of the AP.
U32 hwApProfManagementVlan	1.3.6.1.4.1.2011.6.139.11.1.12.1.10	Unsigned32	read-write	This object indicates the management VLAN for APs. The default value is 0xFFFFFFFF.
U32 hwApProfMaxStaNum	1.3.6.1.4.1.2011.6.139.11.1.12.1.6	Unsigned32	read-write	This object indicates the maximum number of access users on an AP. The default value is 128.
U32 hwApProfMcSuppresionAutoDetectThreshold	1.3.6.1.4.1.2011.6.139.11.1.12.1.86	Unsigned32	read-write	This object indicates the value of multicast value .The default value is 256.
U32 hwApProfMemoryUsageThreshold	1.3.6.1.4.1.2011.6.139.11.1.12.1.17	Unsigned32	read-write	This object indicates the memory usage alarm threshold of an AP. The default value is 80. It is expressed in percentage.
INT hwApProfMeshRole	1.3.6.1.4.1.2011.6.139.11.1.12.1.8	INTEGER	read-write	This object indicates a Mesh role. The default value is 1.
INT hwApProfMppActiveReselectionSwitch	1.3.6.1.4.1.2011.6.139.11.1.12.1.49	INTEGER	read-write	This object indicates of mpp active reselection.
U32 hwApProfMtu	1.3.6.1.4.1.2011.6.139.11.1.12.1.7	Unsigned32	read-write	This object indicates the MTU of an AP interface. The default value is 1500.
U32 hwApProfOpHRxPowerThreshold	1.3.6.1.4.1.2011.6.139.11.1.12.1.13	Unsigned32	read-write	This object indicates the high power threshold of an optical module. The default value is 1000.
U32 hwApProfOpHTempThreshold	1.3.6.1.4.1.2011.6.139.11.1.12.1.15	Unsigned32	read-write	This object indicates the high temperature threshold of an optical module. The default value is 70.
U32 hwApProfOpLRxPowerThreshold	1.3.6.1.4.1.2011.6.139.11.1.12.1.14	Unsigned32	read-write	This object indicates the low power threshold of an optical module. The default value is 50.
I32 hwApProfOpLTempThreshold	1.3.6.1.4.1.2011.6.139.11.1.12.1.16	Integer32	read-write	This object indicates the low temperature threshold of an optical module. The default value is -5.
OCT hwApProfPkiCertFileName	1.3.6.1.4.1.2011.6.139.11.1.12.1.95	OCTET STRING	read-write	This object indicates the AP PKI certificate filename.
OCT hwApProfPkiCertFilePassword	1.3.6.1.4.1.2011.6.139.11.1.12.1.96	OCTET STRING	read-write	This object indicates the AP PKI certificate file password.
INT hwApProfPkiCertFileType	1.3.6.1.4.1.2011.6.139.11.1.12.1.94	INTEGER	read-write	This object indicates the AP PKI certificate file type.
INT hwApProfPoeAfInrushSwitch	1.3.6.1.4.1.2011.6.139.11.1.12.1.59	INTEGER	read-write	This object indicates whether to enable the IEEE 802.3at-compliant device to provide power in accordance with IEEE 802.3af.The default value is 1.
INT hwApProfPoeHighInrushSwitch	1.3.6.1.4.1.2011.6.139.11.1.12.1.60	INTEGER	read-write	This object indicates whether to enable the device to allow high inrush current during power-on.The default value is 1.
U32 hwApProfPoeMaxPower	1.3.6.1.4.1.2011.6.139.11.1.12.1.56	Unsigned32	read-write	This object indicates the maximum output power of the AP.The default value is 750000.
U32 hwApProfPoePowerReserved	1.3.6.1.4.1.2011.6.139.11.1.12.1.57	Unsigned32	read-write	This object indicates the percentage of reserved PoE power to the available PoE power.The default value is 255.
U32 hwApProfPoePowerThreshold	1.3.6.1.4.1.2011.6.139.11.1.12.1.58	Unsigned32	read-write	This object indicates the alarm threshold of PoE power consumption percentage.The default value is 255.
INT hwApProfPowerForceWorkmode	1.3.6.1.4.1.2011.6.139.11.1.12.1.106	INTEGER	read-write	This object indicates the force workmode of power. The default value is 255.
IP hwApProfPrimaryLinkIPv4	1.3.6.1.4.1.2011.6.139.11.1.12.1.61	IpAddress	read-write	This object indicates the IP address of the primary AC.
OCT hwApProfPrimaryLinkIPv6	1.3.6.1.4.1.2011.6.139.11.1.12.1.62	OCTET STRING	read-write	This object indicates the IPv6 address of the primary AC.
IP hwApProfProtectACIp	1.3.6.1.4.1.2011.6.139.11.1.12.1.29	IpAddress	read-write	This object indicates the IP address of the standby AC.
OCT hwApProfProtectACIpv6	1.3.6.1.4.1.2011.6.139.11.1.12.1.30	OCTET STRING	read-write	This object indicates the IPv6 address of the standby AC.
U32 hwApProfProtectLinkSwitchEchoProbeTime	1.3.6.1.4.1.2011.6.139.11.1.12.1.79	Unsigned32	read-write	This object indicates the time of echo probe. The default value is 20.
U32 hwApProfProtectLinkSwitchGapThreshold	1.3.6.1.4.1.2011.6.139.11.1.12.1.81	Unsigned32	read-write	This object indicates the gap threshold of packet-loss rate. The default value is 15.
INT hwApProfProtectLinkSwitchMode	1.3.6.1.4.1.2011.6.139.11.1.12.1.78	INTEGER	read-write	This object indicates the mode of the ac protect link-switch. The default value is 1.
U32 hwApProfProtectLinkSwitchStartThreshold	1.3.6.1.4.1.2011.6.139.11.1.12.1.80	Unsigned32	read-write	This object indicates the start threshold of packet-loss rate. The default value is 20.
U32 hwApProfProtectPriority	1.3.6.1.4.1.2011.6.139.11.1.12.1.28	Unsigned32	read-write	This object indicates the AC priority. A smaller value indicates a higher priority. The default value 0xFFFFFFFF indicates that no priority is configured.
INT hwApProfRadioMode	1.3.6.1.4.1.2011.6.139.11.1.12.1.105	INTEGER	read-write	This object indicates the radio mode for AP. The default value is 255.
ROW hwApProfRowStatus	1.3.6.1.4.1.2011.6.139.11.1.12.1.45	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.
U32 hwApProfSampleTime	1.3.6.1.4.1.2011.6.139.11.1.12.1.4	Unsigned32	read-write	This object indicates the sampling interval for the AC to collecting AP performance data. The default value is 30. It is expressed in seconds.
INT hwApProfSFTPSwitch	1.3.6.1.4.1.2011.6.139.11.1.12.1.46	INTEGER	read-write	This object indicates whether to enable the SFTP. The default value is 2.
U32 hwApProfSpectrumNonWifiDeviceAgingTime	1.3.6.1.4.1.2011.6.139.11.1.12.1.55	Unsigned32	read-write	This object indicates the aging time of non-WLAN devices on the AC. The default value is 3 minutes.
IP hwApProfSpectrumServerIPAddress	1.3.6.1.4.1.2011.6.139.11.1.12.1.50	IpAddress	read-write	This object indicates the IPv6 address of the spectrum analysis server. You choose an IPv4 or IPv6 address. By default, the IPv4 address 255.255.255.255 is used.
OCT hwApProfSpectrumServerIPv6Address	1.3.6.1.4.1.2011.6.139.11.1.12.1.51	OCTET STRING	read-write	This object indicates the IPv6 address of the spectrum analysis server. You choose an IPv4 or IPv6 address. By default, it is not configured.
U32 hwApProfSpectrumServerPort	1.3.6.1.4.1.2011.6.139.11.1.12.1.52	Unsigned32	read-write	This object indicates the port of the spectrum analysis server. The default value is 0.
U32 hwApProfSpectrumViaACPort	1.3.6.1.4.1.2011.6.139.11.1.12.1.54	Unsigned32	read-write	This object indicates the port number used by the AP to report spectrum analysis data to the AC. The default value is 0.
INT hwApProfSpectrumViaACSwitch	1.3.6.1.4.1.2011.6.139.11.1.12.1.53	INTEGER	read-write	This object indicates the status of the spectrum analysis function. The default value is 1.
INT hwApProfStaAccessMode	1.3.6.1.4.1.2011.6.139.11.1.12.1.43	INTEGER	read-write	This object indicates the access mode. The default value is 1.
OCT hwApProfStaAccessModeProfile	1.3.6.1.4.1.2011.6.139.11.1.12.1.44	OCTET STRING	read-write	This object indicates blacklist and whitelist profiles.
INT hwApProfStaArpNDProxyBeforeAssoc	1.3.6.1.4.1.2011.6.139.11.1.12.1.92	INTEGER	read-write	This object indicates the mode of the station arp-nd-proxy before association .The default value is 1.
U32 hwApProfStatInterval	1.3.6.1.4.1.2011.6.139.11.1.12.1.3	Unsigned32	read-write	Description.
MAC hwApProfStationConnectivityDetectStaMac	1.3.6.1.4.1.2011.6.139.11.1.97.1.1	MacAddress	not-accessible	This object indicates the connectivity detect station mac, MAX number is 8
hwApProfStationConnectivityDetectStaMacEntry	1.3.6.1.4.1.2011.6.139.11.1.97.1		not-accessible	The indexes of this table are hwApSystemProfName and hwApProfStationConnectivityDetectStaMac.
ROW hwApProfStationConnectivityDetectStaMacRowStatus	1.3.6.1.4.1.2011.6.139.11.1.97.1.2	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDGO and ROWSTATUS_DESTROY are commonly used.
hwApProfStationConnectivityDetectStaMacTable	1.3.6.1.4.1.2011.6.139.11.1.97		not-accessible	This table is used to configure Station Connectivity Detect Mac.
INT hwApProfStationConnectivityDetectSwitch	1.3.6.1.4.1.2011.6.139.11.1.12.1.91	INTEGER	read-write	This object indicates whether to disable the Station Connectivity Detect. The default value is enable.
INT hwApProfSTelnetSwitch	1.3.6.1.4.1.2011.6.139.11.1.12.1.20	INTEGER	read-write	This object indicates whether to enable SSH. The default value is 2.
INT hwApProfTelnetSwitch	1.3.6.1.4.1.2011.6.139.11.1.12.1.19	INTEGER	read-write	This object indicates whether to enable Telnet. The default value is 1.
INT hwApProfTemporaryManagement	1.3.6.1.4.1.2011.6.139.11.1.12.1.9	INTEGER	read-write	This object indicates the status of the AP-based offline VAP switch. The default value is 2.
OCT hwApProfTemporaryManagementPsk	1.3.6.1.4.1.2011.6.139.11.1.12.1.77	OCTET STRING	read-write	This object indicates the psk of the AP-based offline VAP.
U32 hwApProfUcSuppresionAutoDetectThreshold	1.3.6.1.4.1.2011.6.139.11.1.12.1.87	Unsigned32	read-write	This object indicates the value of unicast value .The default value is 256.
INT hwApProfUcSuppressionAutoDetectSwitch	1.3.6.1.4.1.2011.6.139.11.1.12.1.93	INTEGER	read-write	This object indicates the switch of the unicast-suppression auto detect .The default value is 2.
INT hwApProfUsbSwitch	1.3.6.1.4.1.2011.6.139.11.1.12.1.66	INTEGER	read-write	This object indicates whether to enable the USB. The default value is 1.
hwAPProvisionGroups	1.3.6.1.4.1.2011.6.139.11.2.2.50			Description.
INT hwApPwdIsExpired	1.3.6.1.4.1.2011.6.139.11.1.1.18.7	INTEGER	read-only	Query password is expired or not
INT hwApPwdIsOrginal	1.3.6.1.4.1.2011.6.139.11.1.1.18.8	INTEGER	read-only	Query password is original or not
U32 hwApPwdPolicyAlertBefore	1.3.6.1.4.1.2011.6.139.11.1.1.18.4	Unsigned32	read-write	The days of password before-expire,the default is 30
INT hwApPwdPolicyAlertOriginal	1.3.6.1.4.1.2011.6.139.11.1.1.18.5	INTEGER	read-write	Set password original-alert,the default is enable
INT hwApPwdPolicyEnable	1.3.6.1.4.1.2011.6.139.11.1.1.18.1	INTEGER	read-write	Ap password policy,the default is disable
U32 hwApPwdPolicyExpire	1.3.6.1.4.1.2011.6.139.11.1.1.18.2	Unsigned32	read-write	Set the days of password expire,the default is 90
U32 hwApPwdPolicyHistoryRecordNum	1.3.6.1.4.1.2011.6.139.11.1.1.18.3	Unsigned32	read-write	The number of password history record,the default is 5
OCT hwApPwdSetTime	1.3.6.1.4.1.2011.6.139.11.1.1.18.6	OCTET STRING	read-only	Get the password set time
OCT hwAPSp5gRadioProfile	1.3.6.1.4.1.2011.6.139.11.1.9.1.2	OCTET STRING	read-write	This object indicates the bound 5G radio profile.
INT hwAPSpApAddressMode	1.3.6.1.4.1.2011.6.139.11.1.7.1.13	INTEGER	read-write	This object indicates the IP address allocation mode.
U32 hwAPSpApId	1.3.6.1.4.1.2011.6.139.11.1.7.1.7	Unsigned32	read-write	This object indicates the AP ID.
IP hwAPSpApIPv4Address	1.3.6.1.4.1.2011.6.139.11.1.7.1.14	IpAddress	read-write	This object indicates the AP's IPv4 address. hwAPSpApIPv4Address takes effect if hwAPSpApAddressMode is set to static.
IP hwAPSpApIPv4Gateway	1.3.6.1.4.1.2011.6.139.11.1.7.1.16	IpAddress	read-write	This object indicates the AP's IPv4 gateway. hwAPSpApIPv4Gateway takes effect if hwAPSpApAddressMode is set to static.
IP hwAPSpApIPv4Mask	1.3.6.1.4.1.2011.6.139.11.1.7.1.15	IpAddress	read-write	This object indicates the AP's IPv4 mask. hwAPSpApIPv4Mask takes effect if hwAPSpApAddressMode is set to static.
OCT hwAPSpApIPv6Address	1.3.6.1.4.1.2011.6.139.11.1.7.1.17	OCTET STRING	read-write	This object indicates the AP's IPv6 address. hwAPSpApIPv6Address takes effect if hwAPSpApAddressMode is set to static.
OCT hwAPSpApIPv6Gateway	1.3.6.1.4.1.2011.6.139.11.1.7.1.19	OCTET STRING	read-write	This object indicates the AP's IPv6 gateway. hwAPSpApIPv6Gateway takes effect if hwAPSpApAddressMode is set to static.
I32 hwAPSpApIPv6PrefixLen	1.3.6.1.4.1.2011.6.139.11.1.7.1.18	Integer32	read-write	This object indicates the length of the IPv6 address prefix.
MAC hwAPSpApMac	1.3.6.1.4.1.2011.6.139.11.1.7.1.6	MacAddress	not-accessible	This object indicates the MAC address of an AP.
OCT hwAPSpApName	1.3.6.1.4.1.2011.6.139.11.1.7.1.23	OCTET STRING	read-write	Description.
OCT hwAPSpAPSystemProfile	1.3.6.1.4.1.2011.6.139.11.1.7.1.2	OCTET STRING	read-write	This object indicates the system profile bound to the AP specific profile.
OCT hwAPSpApTypeInfo	1.3.6.1.4.1.2011.6.139.11.1.7.1.8	OCTET STRING	read-write	This object indicates the domain profile bound to the AP specific profile.
OCT hwAPSpApZoneName	1.3.6.1.4.1.2011.6.139.11.1.7.1.28	OCTET STRING	read-write	This object indicates the AP zone name.
INT hwAPSpAutoBandwidthSelectSwitch	1.3.6.1.4.1.2011.6.139.11.1.9.1.32	INTEGER	read-write	This object indicates the status of the automatic bandwidth selection function. The default value is 255.
INT hwAPSpAutoChannelSelectSwitch	1.3.6.1.4.1.2011.6.139.11.1.9.1.26	INTEGER	read-write	This object indicates the status of the automatic channel selection function. The default value is 255.
INT hwAPSpAutoTxPowerSelectSwitch	1.3.6.1.4.1.2011.6.139.11.1.9.1.27	INTEGER	read-write	This object indicates the status of the automatic power selection function. The default value is 255.
OCT hwAPSpBleProfile	1.3.6.1.4.1.2011.6.139.11.1.7.1.10	OCTET STRING	read-write	This object indicates the bound BLE profile.
OCT hwAPSpBranchGroupName	1.3.6.1.4.1.2011.6.139.11.1.7.1.24	OCTET STRING	read-write	This object indicates the AP branch group name.
INT hwAPSpCardConnType	1.3.6.1.4.1.2011.6.139.11.1.75.1.8	INTEGER	read-write	Description.
OCT hwAPSpDomainName	1.3.6.1.4.1.2011.6.139.11.1.7.1.27	OCTET STRING	read-write	This object indicates the domain name.
OCT hwAPSpDomainProfile	1.3.6.1.4.1.2011.6.139.11.1.7.1.4	OCTET STRING	read-write	This object indicates the domain profile bound to the AP specific profile.
hwAPSpecificCardEntry	1.3.6.1.4.1.2011.6.139.11.1.75.1		not-accessible	Description.
hwAPSpecificCardGroups	1.3.6.1.4.1.2011.6.139.11.2.2.68			Description.
hwAPSpecificCardTable	1.3.6.1.4.1.2011.6.139.11.1.75		not-accessible	Description.
hwAPSpecificEntry	1.3.6.1.4.1.2011.6.139.11.1.7.1		not-accessible	The index of this table is hwAPSpApMac.
hwAPSpecificGroups	1.3.6.1.4.1.2011.6.139.11.2.2.7			Description.
hwAPSpecificRadioEntry	1.3.6.1.4.1.2011.6.139.11.1.9.1		not-accessible	Indexes of this table are hwAPSpecificName and hwAPSpRadio.
hwAPSpecificRadioGroups	1.3.6.1.4.1.2011.6.139.11.2.2.9			Description.
hwAPSpecificRadioTable	1.3.6.1.4.1.2011.6.139.11.1.9		not-accessible	This table records the information about profiles bound based on radio in an AP specific profile, including 5G radio profile, Mesh profile, WDS profile, WIDS profile, location profile, and spectrum profile.
hwAPSpecificTable	1.3.6.1.4.1.2011.6.139.11.1.7		not-accessible	This table is used to create or delete an AP specific profile and bind an AP system profile, 2G radio profile, or domain profile to it or unbind an AP system profile, 2G radio profile, or domain profile from it.
hwAPSpecificVapEntry	1.3.6.1.4.1.2011.6.139.11.1.10.1		not-accessible	Indexes of this table are hwAPSpWlan, hwAPSpRadio, and hwAPSpApMac.
hwAPSpecificVapGroups	1.3.6.1.4.1.2011.6.139.11.2.2.10			Description.
hwAPSpecificVapTable	1.3.6.1.4.1.2011.6.139.11.1.10		not-accessible	This table is used to create VAPs in an AP specific profile.
hwAPSpecificWiredPortEntry	1.3.6.1.4.1.2011.6.139.11.1.8.1		not-accessible	Indexes of this table are hwAPSpWPInterfaceType, hwAPSpWPInterfaceNum and hwAPSpApMac.
hwAPSpecificWiredPortGroups	1.3.6.1.4.1.2011.6.139.11.2.2.8			Description.
hwAPSpecificWiredPortTable	1.3.6.1.4.1.2011.6.139.11.1.8		not-accessible	This table is used to bind an AP wired port profile to an AP specific profile or unbind an AP wired port profile from an AP specific profile..
OCT hwAPSpGroupName	1.3.6.1.4.1.2011.6.139.11.1.7.1.22	OCTET STRING	read-write	Description.
U32 hwAPSpIoTIndex	1.3.6.1.4.1.2011.6.139.11.1.75.1.1	Unsigned32	not-accessible	Description.
U32 hwAPSpIoTNetExtPort	1.3.6.1.4.1.2011.6.139.11.1.75.1.11	Unsigned32	read-write	Description.
U32 hwAPSpIoTNetPort	1.3.6.1.4.1.2011.6.139.11.1.75.1.10	Unsigned32	read-write	Description.
INT hwAPSpIoTNetProtocolType	1.3.6.1.4.1.2011.6.139.11.1.75.1.9	INTEGER	read-write	Description.
U32 hwAPSpIoTNetTCPPort	1.3.6.1.4.1.2011.6.139.11.1.75.1.6	Unsigned32	read-write	Description.
U32 hwAPSpIoTNetUDPPort	1.3.6.1.4.1.2011.6.139.11.1.75.1.4	Unsigned32	read-write	Description.
OCT hwAPSpIoTProfile	1.3.6.1.4.1.2011.6.139.11.1.75.1.3	OCTET STRING	read-write	Description.
ROW hwAPSpIoTRowStatus	1.3.6.1.4.1.2011.6.139.11.1.75.1.5	RowStatus	read-write	Description.
OCT hwAPSpIoTSerialProfile	1.3.6.1.4.1.2011.6.139.11.1.75.1.2	OCTET STRING	read-write	Description.
OCT hwAPSpIoTWiredPortProfile	1.3.6.1.4.1.2011.6.139.11.1.75.1.7	OCTET STRING	read-write	Description.
OCT hwAPSpIPv4ACList	1.3.6.1.4.1.2011.6.139.11.1.7.1.20	OCTET STRING	read-write	This object indicates the AC IPv4 address list. NOTE AC lists are separated by question marks (?).A maximum of four AC lists can be configured.
OCT hwAPSpIPv6ACList	1.3.6.1.4.1.2011.6.139.11.1.7.1.21	OCTET STRING	read-write	This object indicates the AC IPv6 address list. NOTE AC lists are separated by question marks (?).A maximum of four AC lists can be configured.
OCT hwAPSpLatitude	1.3.6.1.4.1.2011.6.139.11.1.7.1.12	OCTET STRING	read-write	This object indicates the latitude.
OCT hwAPSpLocation	1.3.6.1.4.1.2011.6.139.11.1.7.1.25	OCTET STRING	read-write	This object indicates the ap location.
OCT hwAPSpLocationProfile	1.3.6.1.4.1.2011.6.139.11.1.9.1.6	OCTET STRING	read-write	This object indicates the bound location profile.
OCT hwAPSpLongitude	1.3.6.1.4.1.2011.6.139.11.1.7.1.11	OCTET STRING	read-write	This object indicates the longitude.
OCT hwAPSpMeshProfile	1.3.6.1.4.1.2011.6.139.11.1.9.1.3	OCTET STRING	read-write	This object indicates the bound Mesh profile.
OCT hwAPSpMeshWhitelistProfile	1.3.6.1.4.1.2011.6.139.11.1.9.1.10	OCTET STRING	read-write	This object indicates the bound whitelist profile.
U32 hwAPSpRadio	1.3.6.1.4.1.2011.6.139.11.1.9.1.1	Unsigned32	not-accessible	This object indicates the radio ID. It is the index of the table.
OCT hwAPSpRadio2gProfile	1.3.6.1.4.1.2011.6.139.11.1.9.1.9	OCTET STRING	read-write	This object indicates the bound 2G radio profile.
I32 hwAPSpRadioAntennaGain	1.3.6.1.4.1.2011.6.139.11.1.9.1.16	Integer32	read-write	This object indicates antenna gains. The default value 0xFF indicates that the default gain of an AP is used. It is expressed in dB. Default gains vary with different types of APs.
U32 hwAPSpRadioApId	1.3.6.1.4.1.2011.6.139.11.1.9.1.24	Unsigned32	read-only	This object indicates the AP ID.
INT hwAPSpRadioBandwidth	1.3.6.1.4.1.2011.6.139.11.1.9.1.14	INTEGER	read-write	This object indicate a bandwidth. The default value is 255.
INT hwAPSpRadioCalibrateFlexibleRadio	1.3.6.1.4.1.2011.6.139.11.1.9.1.31	INTEGER	read-write	This object indicates the status of Beacon Switch. The default value is 255.
U32 hwAPSpRadioChannel	1.3.6.1.4.1.2011.6.139.11.1.9.1.13	Unsigned32	read-write	This object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 196 (with a separation interval of 4).
U32 hwAPSpRadioCoverageDistance	1.3.6.1.4.1.2011.6.139.11.1.9.1.17	Unsigned32	read-write	This object indicates a radio coverage distance. The default value is 65535. The unit is 0.1 km.
U32 hwAPSpRadioEirp	1.3.6.1.4.1.2011.6.139.11.1.9.1.15	Unsigned32	read-write	This object indicates a power value. The default value is 255. The configuration is saved but the actual power is determined by the maximum power supported by the AP.
INT hwAPSpRadioFrequency	1.3.6.1.4.1.2011.6.139.11.1.9.1.19	INTEGER	read-write	This object indicates the setting of the frequency band for radio 0. The default value is invalid. 1: frequency2G, 2: frequency5G.
ROW hwAPSpRadioRowStatus	1.3.6.1.4.1.2011.6.139.11.1.9.1.8	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
U32 hwAPSpRadioSecondChannel	1.3.6.1.4.1.2011.6.139.11.1.9.1.25	Unsigned32	read-write	This object indicates a radio-frequency channel. The value ranges from 42,58,106,122,138,155.
INT hwAPSpRadioSwitch	1.3.6.1.4.1.2011.6.139.11.1.9.1.12	INTEGER	read-write	This object indicates the switch of radio. The default value is 255.
INT hwAPSpRadioWorkMode	1.3.6.1.4.1.2011.6.139.11.1.9.1.18	INTEGER	read-write	This object indicates the radio working mode. The default value is 255.
INT hwAPSpReferenceDataAnalysis	1.3.6.1.4.1.2011.6.139.11.1.9.1.33	INTEGER	read-write	This object indicates the status of the referencing data-analysis function. The default value is 255.
ROW hwAPSpRowStatus	1.3.6.1.4.1.2011.6.139.11.1.7.1.5	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.
INT hwAPSpSfnRoamBeaconSwitch	1.3.6.1.4.1.2011.6.139.11.1.9.1.29	INTEGER	read-write	This object indicates the status of Beacon Switch. The default value is 255.
I32 hwAPSpSfnRoamCtsDelay	1.3.6.1.4.1.2011.6.139.11.1.9.1.30	Integer32	read-write	This object indicates Cts Delay time. The default value is 0.
INT hwAPSpSfnRoamCtsSwitch	1.3.6.1.4.1.2011.6.139.11.1.9.1.28	INTEGER	read-write	This object indicates the status of Cts Switch. The default value is 255.
OCT hwAPSpSiteCode	1.3.6.1.4.1.2011.6.139.11.1.7.1.26	OCTET STRING	read-write	This object indicates the site code.
INT hwAPSpSpectrumAnalysisSwitch	1.3.6.1.4.1.2011.6.139.11.1.9.1.20	INTEGER	read-write	This object indicates the status of the spectrum analysis function. The default value is 255.
U32 hwAPSpVapApId	1.3.6.1.4.1.2011.6.139.11.1.10.1.4	Unsigned32	read-only	This object indicates the AP ID.
OCT hwAPSpVapProfile	1.3.6.1.4.1.2011.6.139.11.1.10.1.2	OCTET STRING	read-write	This object indicates the bound VAP profile.
ROW hwAPSpVapRowStatus	1.3.6.1.4.1.2011.6.139.11.1.10.1.3	RowStatus	read-write	This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
U32 hwAPSpVapServiceVlan	1.3.6.1.4.1.2011.6.139.11.1.10.1.5	Unsigned32	read-write	This object indicates the service VLAN for the VAP. The invalid value is 0.
OCT hwAPSpVapVlanPool	1.3.6.1.4.1.2011.6.139.11.1.10.1.6	OCTET STRING	read-write	This object indicates the VLAN pool to which the VAP is bound.
OCT hwAPSpWdsProfile	1.3.6.1.4.1.2011.6.139.11.1.9.1.4	OCTET STRING	read-write	This object indicates the bound WDS profile.
OCT hwAPSpWdsWhitelistProfile	1.3.6.1.4.1.2011.6.139.11.1.9.1.11	OCTET STRING	read-write	This object indicates the bound whitelist profile.
U32 hwAPSpWidsAttackDetectEnBmp	1.3.6.1.4.1.2011.6.139.11.1.9.1.22	Unsigned32	read-write	This object indicates the bit map of the brute force attack switch. bit0:weak-iv, bit1:spoof, bit2:flood, bit3:wpa-psk, bit4:wpa2-psk, bit5:wapi-psk, bit6:wep-psk.
INT hwAPSpWidsAttackDetectFlood	1.3.6.1.4.1.2011.6.139.11.1.9.1.36	INTEGER	read-write	This object indicates flood attack detection. The default value is 255.
INT hwAPSpWidsAttackDetectSpoof	1.3.6.1.4.1.2011.6.139.11.1.9.1.35	INTEGER	read-write	This object indicates spoofing attack detection. The default value is 255.
INT hwAPSpWidsAttackDetectWapiPsk	1.3.6.1.4.1.2011.6.139.11.1.9.1.39	INTEGER	read-write	This object indicates brute force attack detection in WAPI-PSK authentication. The default value is 255.
INT hwAPSpWidsAttackDetectWeakIv	1.3.6.1.4.1.2011.6.139.11.1.9.1.34	INTEGER	read-write	This object indicates weak IV attack detection. The default value is 255.
INT hwAPSpWidsAttackDetectWepShareKey	1.3.6.1.4.1.2011.6.139.11.1.9.1.40	INTEGER	read-write	This object indicates brute force attack detection in WEP shared key authentication. The default value is 255.
INT hwAPSpWidsAttackDetectWpa2Psk	1.3.6.1.4.1.2011.6.139.11.1.9.1.38	INTEGER	read-write	This object indicates brute force attack detection in WPA2-PSK authentication. The default value is 255.
INT hwAPSpWidsAttackDetectWpaPsk	1.3.6.1.4.1.2011.6.139.11.1.9.1.37	INTEGER	read-write	This object indicates brute force attack detection in WPA-PSK authentication. The default value is 255.
INT hwAPSpWidsDeviceDetectSwitch	1.3.6.1.4.1.2011.6.139.11.1.9.1.21	INTEGER	read-write	This object indicates the status of the device detection function. The default value is 255.
OCT hwAPSpWidsProfile	1.3.6.1.4.1.2011.6.139.11.1.7.1.9	OCTET STRING	read-write	This object indicates the bound WIDS profile.
INT hwAPSpWidsRogueContainSwitch	1.3.6.1.4.1.2011.6.139.11.1.9.1.23	INTEGER	read-write	This object indicates the status of the device detection function. The default value is 255.
U32 hwAPSpWlan	1.3.6.1.4.1.2011.6.139.11.1.10.1.1	Unsigned32	not-accessible	This object indicates the WLAN ID. It is the index of the table.
U32 hwAPSpWPApId	1.3.6.1.4.1.2011.6.139.11.1.8.1.5	Unsigned32	read-only	This object indicates the AP ID.
U32 hwAPSpWPInterfaceNum	1.3.6.1.4.1.2011.6.139.11.1.8.1.2	Unsigned32	not-accessible	This object indicates the interface index.
INT hwAPSpWPInterfaceType	1.3.6.1.4.1.2011.6.139.11.1.8.1.1	INTEGER	not-accessible	This object indicates the interface type.
OCT hwAPSpWPProfile	1.3.6.1.4.1.2011.6.139.11.1.8.1.3	OCTET STRING	read-write	This object indicates the bound wired port profile.
ROW hwAPSpWPRowStatus	1.3.6.1.4.1.2011.6.139.11.1.8.1.4	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.
hwApSysBCMCSuppressionEntry	1.3.6.1.4.1.2011.6.139.11.1.95.1		not-accessible	The indexes of this table are hwApSystemProfName, hwApSysBCMCSuppressionPktType.
hwApSysBCMCSuppressionGroups	1.3.6.1.4.1.2011.6.139.11.2.2.95			Description.
INT hwApSysBCMCSuppressionPktType	1.3.6.1.4.1.2011.6.139.11.1.95.1.1	INTEGER	not-accessible	This object indicates the packet type of the ap broadcast and multicast suppression function. This parameter has no default value.
ROW hwApSysBCMCSuppressionRowStatus	1.3.6.1.4.1.2011.6.139.11.1.95.1.4	RowStatus	read-create	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
INT hwApSysBCMCSuppressionSwitch	1.3.6.1.4.1.2011.6.139.11.1.95.1.2	INTEGER	read-write	This object indicates the status of the ap broadcast and multicast suppression function. The default value is 2.
hwApSysBCMCSuppressionTable	1.3.6.1.4.1.2011.6.139.11.1.95		not-accessible	This table is used to configure ap broadcast and multicast suppression information.
U32 hwApSysBCMCSuppressionThreshold	1.3.6.1.4.1.2011.6.139.11.1.95.1.3	Unsigned32	read-write	This object indicates the broadcast and multicast suppression threshold for the AP. The default value is 256 pps, otherBroadcast and otherMulticast is 16pps.
hwApSystemProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.12.1		not-accessible	The index of this table is hwApSystemProfName.
hwApSystemProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.12			Description.
INT hwApSystemProfileNPCapwapReassemblySwitch	1.3.6.1.4.1.2011.6.139.11.1.12.1.104	INTEGER	read-write	This object indicates whether to enable the NP capwap reassembly function. The default value is 1.
INT hwApSystemProfileNPFastForwardingSwitch	1.3.6.1.4.1.2011.6.139.11.1.12.1.103	INTEGER	read-write	This object indicates whether to enable the NP fast forwarding function. The default value is 1.
hwApSystemProfileTable	1.3.6.1.4.1.2011.6.139.11.1.12		not-accessible	This table is used to create or delete an AP system profile and configure AP attributes.
OCT hwApSystemProfName	1.3.6.1.4.1.2011.6.139.11.1.12.1.1	OCTET STRING	not-accessible	This object indicates the name of an AP system profile. It is the index of the table.
U32 hwApSystemWmiIndex	1.3.6.1.4.1.2011.6.139.11.1.92.1.1	Unsigned32	not-accessible	This object indicates the channel index which the wmi server will bind to.
OCT hwApSystemWmiProfile	1.3.6.1.4.1.2011.6.139.11.1.92.1.2	OCTET STRING	read-write	This object indicates the wmi server which will bind to the ap system profile.
hwApSystemWmiProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.92.1		not-accessible	The indexes of this table is hwAPSystemProfName and hwApSystemWmiIndex.
hwApSystemWmiProfileTable	1.3.6.1.4.1.2011.6.139.11.1.92		not-accessible	This table is used to bind the wmi server to the ap system profile by indexed and get binding status.
ROW hwApSystemWmiRowStatus	1.3.6.1.4.1.2011.6.139.11.1.92.1.3	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
hwAPTrafficProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.23.1		not-accessible	The index of this table is hwAPTrafficProfileName.
I32 hwAPTrafficProfileFilterACLID	1.3.6.1.4.1.2011.6.139.11.1.24.1.3	Integer32	read-write	This object indicates the ACL rule for packet filtering in a traffic profile.
INT hwAPTrafficProfileFilterDirection	1.3.6.1.4.1.2011.6.139.11.1.24.1.1	INTEGER	not-accessible	This object indicates the ACL rule direction for packet filtering in a traffic profile. This parameter has no default value.
hwAPTrafficProfileFilterEntry	1.3.6.1.4.1.2011.6.139.11.1.24.1		not-accessible	The indexes of this table are hwAPTrafficProfileName, hwAPTrafficProfileFilterType, and hwAPTrafficProfileFilterDirection.
ROW hwAPTrafficProfileFilterRowStatus	1.3.6.1.4.1.2011.6.139.11.1.24.1.4	RowStatus	read-create	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
hwAPTrafficProfileFilterTable	1.3.6.1.4.1.2011.6.139.11.1.24		not-accessible	This table is used to configure QoS filter information.
INT hwAPTrafficProfileFilterType	1.3.6.1.4.1.2011.6.139.11.1.24.1.2	INTEGER	not-accessible	This object indicates the ACL rule type for packet filtering in a traffic profile. This parameter has no default value.
hwAPTrafficProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.22			Description.
INT hwAPTrafficProfileIGMPSnooping	1.3.6.1.4.1.2011.6.139.11.1.23.1.11	INTEGER	read-write	This object indicates the status of the IGMP snooping function. The default value is 1.
U32 hwAPTrafficProfileIGMPSnoopingMaxBandwidth	1.3.6.1.4.1.2011.6.139.11.1.23.1.30	Unsigned32	read-write	This object indicates the status of the IGMP snooping max bandwidth function. The invalid value is 0.
U32 hwAPTrafficProfileIGMPSnoopingMaxUser	1.3.6.1.4.1.2011.6.139.11.1.23.1.31	Unsigned32	read-write	This object indicates the status of the IGMP snooping max user function. The invalid value is 0.
INT hwAPTrafficProfileIGMPSnoopingReportSuppress	1.3.6.1.4.1.2011.6.139.11.1.23.1.12	INTEGER	read-write	This object indicates the status of the IGMP snooping report suppression function. The default value is 1.
INT hwAPTrafficProfileMcToUc	1.3.6.1.4.1.2011.6.139.11.1.23.1.13	INTEGER	read-write	This object indicates the status of the function of converting multicast to unicast. The default value is 1.
INT hwAPTrafficProfileMcToUcDynamicAdatptive	1.3.6.1.4.1.2011.6.139.11.1.23.1.29	INTEGER	read-write	This object indicates the status of the multicast to unicast dynamic adaptive function. The default value is 2.
INT hwAPTrafficProfileMldSnooping	1.3.6.1.4.1.2011.6.139.11.1.23.1.10	INTEGER	read-write	This object indicates the status of the MLD snooping function. The default value is 1.
OCT hwAPTrafficProfileName	1.3.6.1.4.1.2011.6.139.11.1.23.1.1	OCTET STRING	not-accessible	This object indicates the name of a traffic profile.
INT hwAPTrafficProfileOptimizeBcMcDenyAll	1.3.6.1.4.1.2011.6.139.11.1.23.1.23	INTEGER	read-write	After this function is enabled, other multicast packets, except for proxy response packets and multicast packets converted to unicast packets, are discarded. The default value is 1.
INT hwAPTrafficProfileOptimizeBcMcMismatchAct	1.3.6.1.4.1.2011.6.139.11.1.23.1.28	INTEGER	read-write	This object indicates the status of the bcmc unicast send mismacth action function. The default value is 2.
INT hwAPTrafficProfileOptimizeProxyARP	1.3.6.1.4.1.2011.6.139.11.1.23.1.18	INTEGER	read-write	This object indicates the status of the ARP proxy function. The default value is 1.
INT hwAPTrafficProfileOptimizeProxyND	1.3.6.1.4.1.2011.6.139.11.1.23.1.19	INTEGER	read-write	This object indicates the status of the ND proxy function. The default value is 1.
INT hwAPTrafficProfileOptimizeStaBridgeForward	1.3.6.1.4.1.2011.6.139.11.1.23.1.24	INTEGER	read-write	This object indicates the status of the STA bridge forwarding function. The default value is 2.
U32 hwAPTrafficProfileOptimizeSuppressionBc	1.3.6.1.4.1.2011.6.139.11.1.23.1.14	Unsigned32	read-write	This object indicates the information about broadcast storm suppression. The unit is pps. The default value is 0xFFFFFFFF, indicating that the broadcast storm suppression is not enabled.
U32 hwAPTrafficProfileOptimizeSuppressionMc	1.3.6.1.4.1.2011.6.139.11.1.23.1.16	Unsigned32	read-write	This object indicates the information about multicast storm suppression. The unit is pps. The default value is 0xFFFFFFFF, indicating that the broadcast storm suppression is not enabled.
U32 hwAPTrafficProfileOptimizeSuppressionUc	1.3.6.1.4.1.2011.6.139.11.1.23.1.15	Unsigned32	read-write	This object indicates the information about unknown unicast storm suppression. The unit is pps. The default value is 0xFFFFFFFF, indicating that the broadcast storm suppression is not enabled.
U32 hwAPTrafficProfileOptimizeTCPAdjustMSS	1.3.6.1.4.1.2011.6.139.11.1.23.1.17	Unsigned32	read-write	This object indicates the information about the automatic MSS adjustment. The default value is 0xFFFFFFFF, indicating that this function is not enabled.
INT hwAPTrafficProfileOptimizeUcSendARP	1.3.6.1.4.1.2011.6.139.11.1.23.1.20	INTEGER	read-write	This object indicates the status of the unicast ARP function. The default value is 2.
INT hwAPTrafficProfileOptimizeUcSendDHCP	1.3.6.1.4.1.2011.6.139.11.1.23.1.22	INTEGER	read-write	This object indicates the status of the unicast DHCP function. The default value is 1.
INT hwAPTrafficProfileOptimizeUcSendND	1.3.6.1.4.1.2011.6.139.11.1.23.1.21	INTEGER	read-write	This object indicates the status of the unicast ND function. The default value is 2.
OCT hwAPTrafficProfilePriority80211eUpMap8021p	1.3.6.1.4.1.2011.6.139.11.1.23.1.33	OCTET STRING	read-write	This object indicates the mapping relationship between 802.11e and 802.1p. 802.11e values range from 0 to 7. Two mapped data are separated by a comma.
OCT hwAPTrafficProfilePriority80211eUpMapDscp	1.3.6.1.4.1.2011.6.139.11.1.23.1.4	OCTET STRING	read-write	This object indicates the tunnel priority mappings when data packets are sent from APs to an AC. DSCP values range from 0 to 63 and 802.11e priorities range from 0 to 7. Two mapped data are separated by a comma.
OCT hwAPTrafficProfilePriority8021pDnMap80211e	1.3.6.1.4.1.2011.6.139.11.1.23.1.34	OCTET STRING	read-write	This object indicates the mapping relationship between 802.11e and 802.1p. 802.11e values range from 0 to 7. Two mapped data are separated by a comma.
OCT hwAPTrafficProfilePriorityDscpDnMap80211e	1.3.6.1.4.1.2011.6.139.11.1.23.1.3	OCTET STRING	read-write	This object indicates the mapping relationship between 802.1p priorities of 802.3 packets and user priorities of 802.11 packets when data packets are sent to a downstream AP. DSCP values range from 0 to 63 and 802.11e priorities range from 0 to 7. Two mapped data are separated by a comma.
OCT hwAPTrafficProfilePriorityDscpUpMap8021p	1.3.6.1.4.1.2011.6.139.11.1.23.1.32	OCTET STRING	read-write	This object indicates the mapping relationship between DSCP and 802.1p. DSCP values range from 0 to 63. Two mapped data are separated by a comma.
OCT hwAPTrafficProfilePriorityDscpUpMapDscp	1.3.6.1.4.1.2011.6.139.11.1.23.1.27	OCTET STRING	read-write	This object indicates the mapping relationship between DSCP and DSCP. DSCP values range from 0 to 63. Two mapped data are separated by a comma.
INT hwAPTrafficProfilePriorityMapDnTrustMode	1.3.6.1.4.1.2011.6.139.11.1.23.1.2	INTEGER	read-write	This object indicates the downstream service priority mapping mode. The default value is 1.
INT hwAPTrafficProfilePriorityMapUpPayloadTrustMode	1.3.6.1.4.1.2011.6.139.11.1.23.1.35	INTEGER	read-write	This object indicates the status of priority-map upstream trust. The default value is 1.
INT hwAPTrafficProfilePriorityMapUpTrustMode	1.3.6.1.4.1.2011.6.139.11.1.23.1.26	INTEGER	read-write	This object indicates the tunnel priority mapping mode.
U32 hwAPTrafficProfileRateLimitClientDn	1.3.6.1.4.1.2011.6.139.11.1.23.1.7	Unsigned32	read-write	This object indicates the STA's downlink rate limit. The default value is 0xFFFFFFFF. It is expressed in kbit/s.
INT hwAPTrafficProfileRateLimitClientDynamic	1.3.6.1.4.1.2011.6.139.11.1.23.1.37	INTEGER	read-write	This object indicates the rate limit switch of client. The default value is 2.
U32 hwAPTrafficProfileRateLimitClientDynamicThr	1.3.6.1.4.1.2011.6.139.11.1.23.1.38	Unsigned32	read-write	This object indicates the limit rate of client. Can only be configed with 8,16,32. The default value is 16. It is expressed in Mbps.
U32 hwAPTrafficProfileRateLimitClientUp	1.3.6.1.4.1.2011.6.139.11.1.23.1.6	Unsigned32	read-write	This object indicates the STA's uplink rate limit. The default value is 0xFFFFFFFF. It is expressed in kbit/s.
U32 hwAPTrafficProfileRateLimitVapDn	1.3.6.1.4.1.2011.6.139.11.1.23.1.9	Unsigned32	read-write	This object indicates the VAP's downlink rate limit. The default value is 0xFFFFFFFF. It is expressed in kbit/s.
U32 hwAPTrafficProfileRateLimitVapUp	1.3.6.1.4.1.2011.6.139.11.1.23.1.8	Unsigned32	read-write	This object indicates the VAP's uplink rate limit. The default value is 0xFFFFFFFF. It is expressed in kbit/s.
I32 hwAPTrafficProfileRemarkACLID	1.3.6.1.4.1.2011.6.139.11.1.82.1.3	Integer32	read-write	This object indicates the ACL rule for packet remarking in a traffic profile.
INT hwAPTrafficProfileRemarkDirection	1.3.6.1.4.1.2011.6.139.11.1.82.1.1	INTEGER	not-accessible	This object indicates the ACL rule direction for packet remarking in a traffic profile. This parameter has no default value.
hwAPTrafficProfileRemarkEntry	1.3.6.1.4.1.2011.6.139.11.1.82.1		not-accessible	Description.
INT hwAPTrafficProfileRemarkIPType	1.3.6.1.4.1.2011.6.139.11.1.82.1.2	INTEGER	not-accessible	This object indicates the ACL rule type for packet remarking in a traffic profile. This parameter has no default value.
ROW hwAPTrafficProfileRemarkRowStatus	1.3.6.1.4.1.2011.6.139.11.1.82.1.6	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
hwAPTrafficProfileRemarkTable	1.3.6.1.4.1.2011.6.139.11.1.82		not-accessible	Description.
INT hwAPTrafficProfileRemarkType	1.3.6.1.4.1.2011.6.139.11.1.82.1.4	INTEGER	read-write	This object indicates the ACL rule type for packet remarking in a traffic profile. This parameter has no default value.
I32 hwAPTrafficProfileRemarkValue	1.3.6.1.4.1.2011.6.139.11.1.82.1.5	Integer32	read-write	This object indicates the ACL rule value for packet remarking in a traffic profile. This parameter has no default value.
ROW hwAPTrafficProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.23.1.25	RowStatus	read-create	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
INT hwAPTrafficProfileSvpVoice	1.3.6.1.4.1.2011.6.139.11.1.23.1.36	INTEGER	read-write	This object indicates the status of the SVP voice function. The default value is 1.
hwAPTrafficProfileTable	1.3.6.1.4.1.2011.6.139.11.1.23		not-accessible	This table is used to configure and query traffic profile parameters.
INT hwAPTrafficProfileUserIsolate	1.3.6.1.4.1.2011.6.139.11.1.23.1.5	INTEGER	read-write	This object indicates the user isolation mode. The default value is 1.
OCT hwAPWiredPortDot1xClientProfileName	1.3.6.1.4.1.2011.6.139.11.1.13.1.31	OCTET STRING	read-write	This object indicates the bound dot1x client profile.
OCT hwAPWiredPortPortLinkProfileName	1.3.6.1.4.1.2011.6.139.11.1.13.1.2	OCTET STRING	read-write	This object indicates the bound AP wired port link profile.
INT hwAPWiredPortProfileArpBindCheck	1.3.6.1.4.1.2011.6.139.11.1.13.1.16	INTEGER	read-write	This object indicates whether to enable ARP packet checking against the binding table.The default value is 1.
INT hwAPWiredPortProfileDhcpTrust	1.3.6.1.4.1.2011.6.139.11.1.13.1.11	INTEGER	read-write	This object indicates whether a port is configured as a DHCP trusted port. The default value is 1.
hwAPWiredPortProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.13.1		not-accessible	The index of this table is hwAPWiredPortProfileName.
hwAPWiredPortProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.13			Description.
INT hwAPWiredPortProfileIGMPSnooping	1.3.6.1.4.1.2011.6.139.11.1.13.1.22	INTEGER	read-write	This object indicates whether to enable IGMP-snooping.The default value is 1.
INT hwAPWiredPortProfileIpBindCheck	1.3.6.1.4.1.2011.6.139.11.1.13.1.15	INTEGER	read-write	This object indicates whether to enable IP packet checking against the binding table.The default value is 1.
INT hwAPWiredPortProfileLearnAddress	1.3.6.1.4.1.2011.6.139.11.1.13.1.14	INTEGER	read-write	This object indicates whether to enable ipv4 address learning.The default value is 1.
INT hwAPWiredPortProfileLearnIpv6Address	1.3.6.1.4.1.2011.6.139.11.1.13.1.23	INTEGER	read-write	This object indicates whether to enable ipv6 address learning.The default value is 1.
INT hwAPWiredPortProfileLoopbackDetect	1.3.6.1.4.1.2011.6.139.11.1.13.1.32	INTEGER	read-write	This object indicates whether to enable Loopback detection on wired ports. The default value is disable(1).
INT hwAPWiredPortProfileMLDSnooping	1.3.6.1.4.1.2011.6.139.11.1.13.1.24	INTEGER	read-write	This object indicates whether to enable MLD-snooping.The default value is 1.
OCT hwAPWiredPortProfileName	1.3.6.1.4.1.2011.6.139.11.1.13.1.1	OCTET STRING	not-accessible	This object indicates the name of an AP wired port link profile.
INT hwAPWiredPortProfileNdTrust	1.3.6.1.4.1.2011.6.139.11.1.13.1.12	INTEGER	read-write	This object indicates whether a port is configured as a ND trusted port. The default value is 1.
OCT hwAPWiredPortProfilePortDesc	1.3.6.1.4.1.2011.6.139.11.1.13.1.3	OCTET STRING	read-write	This object indicates the description of an interface.
U32 hwAPWiredPortProfilePortEthTrunkID	1.3.6.1.4.1.2011.6.139.11.1.13.1.4	Unsigned32	read-write	This object indicates the ID of a Trunk. 0 is valid and 0xFFFFFFFF is invalid. The default value is 0xFFFFFFFF.
INT hwAPWiredPortProfilePortForwardMode	1.3.6.1.4.1.2011.6.139.11.1.13.1.30	INTEGER	read-write	This object indicates whether to config port forward mode.The default value is direct forward.
INT hwAPWiredPortProfilePortMode	1.3.6.1.4.1.2011.6.139.11.1.13.1.6	INTEGER	read-write	This object indicates the mode of the wired port. the default value is 256.
INT hwAPWiredPortProfilePortSec	1.3.6.1.4.1.2011.6.139.11.1.13.1.26	INTEGER	read-write	This object indicates the status of the port security function. The default value is 1.
I32 hwAPWiredPortProfilePortSecMACMaxNum	1.3.6.1.4.1.2011.6.139.11.1.13.1.27	Integer32	read-write	This object indicates the max number of the port security mac. The default value is 1.
INT hwAPWiredPortProfilePortSecProtectAction	1.3.6.1.4.1.2011.6.139.11.1.13.1.29	INTEGER	read-write	This object indicates the protect action of the port security function. The default value is 1.
INT hwAPWiredPortProfilePortSecStickyMac	1.3.6.1.4.1.2011.6.139.11.1.13.1.28	INTEGER	read-write	This object indicates the status of the port security sticky mac function. The default value is 1.
INT hwAPWiredPortProfilePortSTPSwitch	1.3.6.1.4.1.2011.6.139.11.1.13.1.5	INTEGER	read-write	This object indicates whether to enable STP on wired ports. The default value is 3.
U32 hwAPWiredPortProfilePortVlanPvid	1.3.6.1.4.1.2011.6.139.11.1.13.1.7	Unsigned32	read-write	This object indicates the PVID of a port. The default value is 1.
OCT hwAPWiredPortProfilePortVlanTagged	1.3.6.1.4.1.2011.6.139.11.1.13.1.8	OCTET STRING	read-write	This object indicates whether to tag ports with VLAN IDs. The default value is 0.
OCT hwAPWiredPortProfilePortVlanUntagged	1.3.6.1.4.1.2011.6.139.11.1.13.1.9	OCTET STRING	read-write	This object indicates whether to untag VLAN IDS from ports. The default value is 1.
ROW hwAPWiredPortProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.13.1.13	RowStatus	read-create	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
INT hwAPWiredPortProfileSTPAutoShutdown	1.3.6.1.4.1.2011.6.139.11.1.13.1.17	INTEGER	read-write	This object indicates whether to enable STP-triggered port shutdown.The default value is 1.
U32 hwAPWiredPortProfileSTPAutoShutdownRecoveryTime	1.3.6.1.4.1.2011.6.139.11.1.13.1.18	Unsigned32	read-write	This object indicates the automatic port recovery time after an STP-triggered shutdown.The default value is 600.
hwAPWiredPortProfileTable	1.3.6.1.4.1.2011.6.139.11.1.13		not-accessible	This table is used to create or delete an AP wired port link profile and modify or query attributes.
I32 hwAPWiredPortProfileTrafficFilterAclID	1.3.6.1.4.1.2011.6.139.11.1.14.1.3	Integer32	read-write	This object indicates ACL rules for packet filtering.
INT hwAPWiredPortProfileTrafficFilterDirection	1.3.6.1.4.1.2011.6.139.11.1.14.1.1	INTEGER	not-accessible	This object indicates the direction of the ACL-based packet filtering.
hwAPWiredPortProfileTrafficFilterEntry	1.3.6.1.4.1.2011.6.139.11.1.14.1		not-accessible	Indexes of this table are hwAPWiredPortProfileName.
ROW hwAPWiredPortProfileTrafficFilterRowStatus	1.3.6.1.4.1.2011.6.139.11.1.14.1.4	RowStatus	read-create	This object indicates packet filtering rules configured on the wired interface.
hwAPWiredPortProfileTrafficFilterTable	1.3.6.1.4.1.2011.6.139.11.1.14		not-accessible	This table is used to configure ACL-based packet filtering in an AP wired port profile.
INT hwAPWiredPortProfileTrafficFilterType	1.3.6.1.4.1.2011.6.139.11.1.14.1.2	INTEGER	not-accessible	This object indicates the type of the ACL-based packet filtering.
U32 hwAPWiredPortProfileTrafficOptimizeSuppressionBc	1.3.6.1.4.1.2011.6.139.11.1.13.1.19	Unsigned32	read-write	This object indicates the rate limit for broadcast storm suppression.The default value is 0xFFFFFFFF.
U32 hwAPWiredPortProfileTrafficOptimizeSuppressionMc	1.3.6.1.4.1.2011.6.139.11.1.13.1.21	Unsigned32	read-write	This object indicates the rate limit for multicast storm suppression.The default value is 0xFFFFFFFF.
U32 hwAPWiredPortProfileTrafficOptimizeSuppressionUc	1.3.6.1.4.1.2011.6.139.11.1.13.1.20	Unsigned32	read-write	This object indicates the rate limit for unknown unicast storm suppression.The default value is 0xFFFFFFFF.
U32 hwAPWiredPortProfileTrafficOptimizeTcpAdjustMss	1.3.6.1.4.1.2011.6.139.11.1.13.1.25	Unsigned32	read-write	Description.
U32 hwAPWiredPortProfileTrafficRemarkACLID	1.3.6.1.4.1.2011.6.139.11.1.81.1.3	Unsigned32	read-write	Description.
INT hwAPWiredPortProfileTrafficRemarkDirection	1.3.6.1.4.1.2011.6.139.11.1.81.1.1	INTEGER	not-accessible	Description.
hwAPWiredPortProfileTrafficRemarkEntry	1.3.6.1.4.1.2011.6.139.11.1.81.1		not-accessible	Description.
INT hwAPWiredPortProfileTrafficRemarkIPType	1.3.6.1.4.1.2011.6.139.11.1.81.1.2	INTEGER	not-accessible	Description.
ROW hwAPWiredPortProfileTrafficRemarkRowStatus	1.3.6.1.4.1.2011.6.139.11.1.81.1.6	RowStatus	read-write	Description.
hwAPWiredPortProfileTrafficRemarkTable	1.3.6.1.4.1.2011.6.139.11.1.81		not-accessible	Description.
INT hwAPWiredPortProfileTrafficRemarkType	1.3.6.1.4.1.2011.6.139.11.1.81.1.4	INTEGER	read-write	Description.
U32 hwAPWiredPortProfileTrafficRemarkValue	1.3.6.1.4.1.2011.6.139.11.1.81.1.5	Unsigned32	read-write	Description.
INT hwAPWiredPortProfileUserIsolate	1.3.6.1.4.1.2011.6.139.11.1.13.1.10	INTEGER	read-write	This object indicates the status of the user isolation function. The default value is 1.
hwBleProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.73.1		not-accessible	Description.
hwBleProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.66			Description.
hwBleProfileTable	1.3.6.1.4.1.2011.6.139.11.1.73		not-accessible	Description.
I32 hwBranchGroupAPNumber	1.3.6.1.4.1.2011.6.139.11.1.88.1.1.3	Integer32	read-only	This object indicates the AP branch group name AP number.
hwBranchGroupEntry	1.3.6.1.4.1.2011.6.139.11.1.88.1.1		not-accessible	The indexes of this table are hwBranchGroupName.
I32 hwBranchGroupFileLoadFailedAP	1.3.6.1.4.1.2011.6.139.11.1.88.1.1.13	Integer32	read-only	This object indicates the AP branch group file failed AP.
INT hwBranchGroupFileLoadOper	1.3.6.1.4.1.2011.6.139.11.1.88.1.1.11	INTEGER	read-write	This object indicates the AP branch group file load oper.
I32 hwBranchGroupFileLoadPercent	1.3.6.1.4.1.2011.6.139.11.1.88.1.1.12	Integer32	read-only	This object indicates the AP branch group file load percent.
INT hwBranchGroupFileStatus	1.3.6.1.4.1.2011.6.139.11.1.88.1.1.4	INTEGER	read-only	This object indicates the AP branch group file status.
hwBranchGroupGroups	1.3.6.1.4.1.2011.6.139.11.2.2.88			Description.
OCT hwBranchGroupName	1.3.6.1.4.1.2011.6.139.11.1.88.1.1.1	OCTET STRING	not-accessible	This object indicates the AP branch group name. It is the index of the table.
ROW hwBranchGroupRowStatus	1.3.6.1.4.1.2011.6.139.11.1.88.1.1.14	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
OCT hwBranchGroupServerCAFileName	1.3.6.1.4.1.2011.6.139.11.1.88.1.1.7	OCTET STRING	read-write	This object indicates the AP branch group CA file name.
OCT hwBranchGroupServerCertFileName	1.3.6.1.4.1.2011.6.139.11.1.88.1.1.6	OCTET STRING	read-write	This object indicates the AP branch group Cert file name.
INT hwBranchGroupServerCertFileType	1.3.6.1.4.1.2011.6.139.11.1.88.1.1.5	INTEGER	read-write	This object indicates the AP branch group Cert file type.
OCT hwBranchGroupServerPSKFileName	1.3.6.1.4.1.2011.6.139.11.1.88.1.1.9	OCTET STRING	read-write	This object indicates the AP branch group PSK file name.
OCT hwBranchGroupServerPSKPassword	1.3.6.1.4.1.2011.6.139.11.1.88.1.1.10	OCTET STRING	read-write	This object indicates the AP branch group PSK file password.
INT hwBranchGroupServerPSKType	1.3.6.1.4.1.2011.6.139.11.1.88.1.1.8	INTEGER	read-write	This object indicates the AP branch group PSK type.
hwBranchGroupTable	1.3.6.1.4.1.2011.6.139.11.1.88.1		not-accessible	This table is used to configure branch group information.
I32 hwBranchGroupUserAccountNumber	1.3.6.1.4.1.2011.6.139.11.1.88.1.1.2	Integer32	read-only	This object indicates the AP branch group name user accout number.
hwCellularNetworkProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.46.1		not-accessible	The index of this table is hwCellularNetworkProfileName.
hwCellularNetworkProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.40			Description.
OCT hwCellularNetworkProfileName	1.3.6.1.4.1.2011.6.139.11.1.46.1.1	OCTET STRING	not-accessible	This object indicates the name of a cellular network profile. It is the index of the table.
OCT hwCellularNetworkProfilePlmnIDList	1.3.6.1.4.1.2011.6.139.11.1.46.1.2	OCTET STRING	read-write	NOTE By default, no configuration is added.PLMNs are separated by question marks (?).A maximum of 32 PLMNs can be configured.A PLMN is a 5-digit or 6-digit numeric string.
ROW hwCellularNetworkProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.46.1.3	RowStatus	read-write	This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
hwCellularNetworkProfileTable	1.3.6.1.4.1.2011.6.139.11.1.46		not-accessible	This table is used to configure and query cellular network profile parameters.
INT hwConnectionCapabilityEsp	1.3.6.1.4.1.2011.6.139.11.1.47.1.2	INTEGER	read-write	This object indicates whether ESP is supported. The default value is unknown(1).
INT hwConnectionCapabilityIcmp	1.3.6.1.4.1.2011.6.139.11.1.47.1.3	INTEGER	read-write	This object indicates whether ICMP is supported. The default value is unknown(1).
hwConnectionCapabilityProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.47.1		not-accessible	The index of this table is hwConnectionCapabilityProfileName.
hwConnectionCapabilityProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.41			Description.
OCT hwConnectionCapabilityProfileName	1.3.6.1.4.1.2011.6.139.11.1.47.1.1	OCTET STRING	not-accessible	This object indicates the name of a connection capability profile. It is the index of the table.
ROW hwConnectionCapabilityProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.47.1.13	RowStatus	read-write	This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
hwConnectionCapabilityProfileTable	1.3.6.1.4.1.2011.6.139.11.1.47		not-accessible	This table is used to configure and query connection capability profile parameters.
INT hwConnectionCapabilityTcpFtp	1.3.6.1.4.1.2011.6.139.11.1.47.1.4	INTEGER	read-write	This object indicates whether FTP(TCP) is supported. The default value is unknown(1).
INT hwConnectionCapabilityTcpHttp	1.3.6.1.4.1.2011.6.139.11.1.47.1.5	INTEGER	read-write	This object indicates whether HTTP (port 80) is supported. The default value is unknown(1).
INT hwConnectionCapabilityTcpPptpVpn	1.3.6.1.4.1.2011.6.139.11.1.47.1.6	INTEGER	read-write	This object indicates whether PPTP for VPN services (port 1723) is supported. The default value is unknown(1).
INT hwConnectionCapabilityTcpSsh	1.3.6.1.4.1.2011.6.139.11.1.47.1.7	INTEGER	read-write	This object indicates whether SSH is supported. The default value is unknown(1).
INT hwConnectionCapabilityTcpTlsVpn	1.3.6.1.4.1.2011.6.139.11.1.47.1.8	INTEGER	read-write	This object indicates whether TLS VPN (port 443) is supported. The default value is unknown(1).
INT hwConnectionCapabilityTcpVoip	1.3.6.1.4.1.2011.6.139.11.1.47.1.9	INTEGER	read-write	This object indicates whether VoIP (port 5060) is supported. The default value is unknown(1).
INT hwConnectionCapabilityUdpIke2Port4500	1.3.6.1.4.1.2011.6.139.11.1.47.1.10	INTEGER	read-write	This object indicates whether IKEv2 (port 4500) is supported. The default value is unknown(1).
INT hwConnectionCapabilityUdpIke2Port500	1.3.6.1.4.1.2011.6.139.11.1.47.1.11	INTEGER	read-write	This object indicates whether IKEv2 (port 500) is supported. The default value is unknown(1).
INT hwConnectionCapabilityUdpVoip	1.3.6.1.4.1.2011.6.139.11.1.47.1.12	INTEGER	read-write	This object indicates whether VoIP (port 5060) is supported. The default value is unknown(1).
OCT hwCountryCode	1.3.6.1.4.1.2011.6.139.11.1.11.1.2	OCTET STRING	read-write	This object indicates the country code. Its value range is subject to the country code table. The default value is CN.
OCT hwDcaChannel2GChannelSet	1.3.6.1.4.1.2011.6.139.11.1.11.1.5	OCTET STRING	read-write	This object indicates the calibration channel set on the 2 GHz frequency band.
INT hwDcaChannel5GBandwidth	1.3.6.1.4.1.2011.6.139.11.1.11.1.3	INTEGER	read-write	This object indicates the calibration bandwidth on the 5 GHz frequency band. The default value is 1 ? 1: bw20 MHz ? 2: bw40 MHz ? 3: bw80 MHz.
OCT hwDcaChannel5GChannelSet	1.3.6.1.4.1.2011.6.139.11.1.11.1.4	OCTET STRING	read-write	This object indicates the calibration channel set on the 5 GHz frequency band.
INT hwFatApAntennaOutputMode	1.3.6.1.4.1.2011.6.139.11.1.60.1.11	INTEGER	read-write	Description.
INT hwFatApAutoBandwidthSelectSwitch	1.3.6.1.4.1.2011.6.139.11.1.60.2.1.25	INTEGER	read-write	This object indicates the status of the automatic bandwidth selection function. The default value is 1.
INT hwFatApAutoChannelSelectSwitch	1.3.6.1.4.1.2011.6.139.11.1.60.2.1.22	INTEGER	read-write	This object indicates the status of the automatic channel selection function. The default value is 2.
INT hwFatApAutoTxPowerSelectSwitch	1.3.6.1.4.1.2011.6.139.11.1.60.2.1.23	INTEGER	read-write	This object indicates the status of the automatic power selection function. The default value is 2.
INT hwFatApCalibrateFlexibleRadioSwitch	1.3.6.1.4.1.2011.6.139.11.1.60.2.1.24	INTEGER	read-write	This object indicates the status of the calibrate flexible-radio switch function. The default value is 2.
INT hwFatApChannelLoadMode	1.3.6.1.4.1.2011.6.139.11.1.60.1.12	INTEGER	read-write	Description.
hwFatApConfigGroups	1.3.6.1.4.1.2011.6.139.11.2.2.54			Description.
hwFatApConfigObjects	1.3.6.1.4.1.2011.6.139.11.1.60
OCT hwFatApCountryCode	1.3.6.1.4.1.2011.6.139.11.1.60.1.1	OCTET STRING	read-write	Description.
OCT hwFatApDcaChannel2GChannelSet	1.3.6.1.4.1.2011.6.139.11.1.60.1.9	OCTET STRING	read-write	Description.
INT hwFatApDcaChannel5GBandwidth	1.3.6.1.4.1.2011.6.139.11.1.60.1.7	INTEGER	read-write	Description.
OCT hwFatApDcaChannel5GChannelSet	1.3.6.1.4.1.2011.6.139.11.1.60.1.8	OCTET STRING	read-write	Description.
U32 hwFatApDynamicBlackAgingTime	1.3.6.1.4.1.2011.6.139.11.1.60.1.10	Unsigned32	read-write	Description.
hwFatApGlobalConfig	1.3.6.1.4.1.2011.6.139.11.1.60.1
U32 hwFatApHighTempThreshold	1.3.6.1.4.1.2011.6.139.11.1.60.1.5	Unsigned32	read-write	Description.
OCT hwFatApLocationProfile	1.3.6.1.4.1.2011.6.139.11.1.60.2.1.7	OCTET STRING	read-write	Description.
I32 hwFatApLowTempThreshold	1.3.6.1.4.1.2011.6.139.11.1.60.1.6	Integer32	read-write	Description.
U32 hwFatApMaxStaNum	1.3.6.1.4.1.2011.6.139.11.1.60.1.2	Unsigned32	read-write	Description.
OCT hwFatApMeshWhitelistProfile	1.3.6.1.4.1.2011.6.139.11.1.60.2.1.9	OCTET STRING	read-write	This object indicates the bound whitelist profile.
U32 hwFatApRadio	1.3.6.1.4.1.2011.6.139.11.1.60.2.1.1	Unsigned32	not-accessible	Description.
INT hwFatApRadio0Frequency	1.3.6.1.4.1.2011.6.139.11.1.60.2.1.2	INTEGER	read-write	Description.
OCT hwFatApRadio2gProfile	1.3.6.1.4.1.2011.6.139.11.1.60.2.1.3	OCTET STRING	read-write	Description.
OCT hwFatApRadio5gProfile	1.3.6.1.4.1.2011.6.139.11.1.60.2.1.4	OCTET STRING	read-write	Description.
I32 hwFatApRadioAntennaGain	1.3.6.1.4.1.2011.6.139.11.1.60.2.1.15	Integer32	read-write	This object indicates antenna gains. The default value 0xFF indicates that the default gain of an AP is used. It is expressed in dB. Default gains vary with different types of APs.
INT hwFatApRadioBandwidth	1.3.6.1.4.1.2011.6.139.11.1.60.2.1.13	INTEGER	read-write	This object indicate a bandwidth. The default value is 1.
U32 hwFatApRadioChannel	1.3.6.1.4.1.2011.6.139.11.1.60.2.1.12	Unsigned32	read-write	This object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 165 (with a separation interval of 4).
U32 hwFatApRadioCoverageDistance	1.3.6.1.4.1.2011.6.139.11.1.60.2.1.16	Unsigned32	read-write	This object indicates a radio coverage distance. The default value is 3. The unit is 0.1 km.
U32 hwFatApRadioEirp	1.3.6.1.4.1.2011.6.139.11.1.60.2.1.14	Unsigned32	read-write	This object indicates a power value. The default value is 127. The configuration is saved but the actual power is determined by the maximum power supported by the AP.
hwFatApRadioEntry	1.3.6.1.4.1.2011.6.139.11.1.60.2.1		not-accessible	Description.
U32 hwFatApRadioId	1.3.6.1.4.1.2011.6.139.11.1.60.3.1.2	Unsigned32	not-accessible	Description.
OCT hwFatApRadioIdxMeshWlistProfile	1.3.6.1.4.1.2011.6.139.11.1.60.4.1.3	OCTET STRING	read-write	This object indicates the bound whitelist profile.
U32 hwFatApRadioIdxSecondChannel	1.3.6.1.4.1.2011.6.139.11.1.60.4.1.6	Unsigned32	read-write	This object indicates a radio-frequency channel. The value ranges from 42,58,106,122,138,155.
OCT hwFatApRadioMeshProfile	1.3.6.1.4.1.2011.6.139.11.1.60.2.1.5	OCTET STRING	read-write	Description.
ROW hwFatApRadioRowStatus	1.3.6.1.4.1.2011.6.139.11.1.60.2.1.8	RowStatus	read-write	Description.
U32 hwFatApRadioSecondChannel	1.3.6.1.4.1.2011.6.139.11.1.60.2.1.21	Unsigned32	read-write	This object indicates a radio-frequency channel. The value ranges from 42,58,106,122,138,155.
U32 hwFatApRadioServiceIdx	1.3.6.1.4.1.2011.6.139.11.1.60.4.1.1	Unsigned32	not-accessible	This object indicates the service index. The current value is 1.
INT hwFatApRadioServiceIdxBandwidth	1.3.6.1.4.1.2011.6.139.11.1.60.4.1.5	INTEGER	read-write	This object indicate a bandwidth. The default value is 1.
U32 hwFatApRadioServiceIdxChannel	1.3.6.1.4.1.2011.6.139.11.1.60.4.1.4	Unsigned32	read-write	This object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 165 (with a separation interval of 4).
hwFatApRadioServiceIdxEntry	1.3.6.1.4.1.2011.6.139.11.1.60.4.1		not-accessible	Indexes of this table are hwFatApRadio and hwFatApRadioServiceIdx.
OCT hwFatApRadioServiceIdxMeshProf	1.3.6.1.4.1.2011.6.139.11.1.60.4.1.2	OCTET STRING	read-write	This object indicates the bound mesh profile.
ROW hwFatApRadioServiceIdxRowStatus	1.3.6.1.4.1.2011.6.139.11.1.60.4.1.7	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
hwFatApRadioServiceIdxTable	1.3.6.1.4.1.2011.6.139.11.1.60.4		not-accessible	This table stores information about the Mesh link with the index of 1 on the vehicle-mounted Fat AP and can also be used for subsequent index-based service expansion.
INT hwFatApRadioSwitch	1.3.6.1.4.1.2011.6.139.11.1.60.2.1.11	INTEGER	read-write	This object indicates the name of a 2G radio profile. It is the index of the table.
hwFatApRadioTable	1.3.6.1.4.1.2011.6.139.11.1.60.2		not-accessible	Description.
INT hwFatApRadioWorkMode	1.3.6.1.4.1.2011.6.139.11.1.60.2.1.17	INTEGER	read-write	This object indicates the radio working mode. The default value is 1.
INT hwFatApReferenceDataAnalysis	1.3.6.1.4.1.2011.6.139.11.1.60.2.1.26	INTEGER	read-write	This object indicates the status of the referencing data-analysis function. The default value is 2.
INT hwFatApStaAccessMode	1.3.6.1.4.1.2011.6.139.11.1.60.1.3	INTEGER	read-write	Description.
OCT hwFatApStaAccessModePorfile	1.3.6.1.4.1.2011.6.139.11.1.60.1.4	OCTET STRING	read-write	Description.
INT hwFatApStaArpNDProxyBeforeAssoc	1.3.6.1.4.1.2011.6.139.11.1.60.1.13	INTEGER	read-write	Description.
hwFatApVapEntry	1.3.6.1.4.1.2011.6.139.11.1.60.3.1		not-accessible	Description.
OCT hwFatApVapProfile	1.3.6.1.4.1.2011.6.139.11.1.60.3.1.3	OCTET STRING	read-write	Description.
ROW hwFatApVapProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.60.3.1.4	RowStatus	read-write	Description.
hwFatApVapTable	1.3.6.1.4.1.2011.6.139.11.1.60.3		not-accessible	Description.
OCT hwFatApWdsWhitelistProfile	1.3.6.1.4.1.2011.6.139.11.1.60.2.1.10	OCTET STRING	read-write	This object indicates the bound whitelist profile.
U32 hwFatApWidsAttackDetectEnBmp	1.3.6.1.4.1.2011.6.139.11.1.60.2.1.19	Unsigned32	read-write	This object indicates the bit map of the brute force attack switch. bit0:weak-iv, bit1:spoof, bit2:flood, bit3:wpa-psk, bit4:wpa2-psk, bit5:wapi-psk, bit6:wep-psk.
INT hwFatApWidsDeviceDetectSwitch	1.3.6.1.4.1.2011.6.139.11.1.60.2.1.18	INTEGER	read-write	This object indicates the status of the device detection function. The default value is 1.
INT hwFatApWidsRogueContainSwitch	1.3.6.1.4.1.2011.6.139.11.1.60.2.1.20	INTEGER	read-write	This object indicates the status of the device detection function. The default value is 1.
U32 hwFatApWlanId	1.3.6.1.4.1.2011.6.139.11.1.60.3.1.1	Unsigned32	not-accessible	Description.
hwHighwayApMemberEntry	1.3.6.1.4.1.2011.6.139.11.1.90.2.1		not-accessible	The indexes of this table are hwHighwayApMemberTable .
hwHighwayApMemberTable	1.3.6.1.4.1.2011.6.139.11.1.90.2		not-accessible	This table is used to set highway member.
INT hwHighwayDeloyType	1.3.6.1.4.1.2011.6.139.11.1.90.2.1.5	INTEGER	read-write	This object indicates member deloy type.
INT hwHighwayDirection	1.3.6.1.4.1.2011.6.139.11.1.90.2.1.2	INTEGER	read-write	This object indicates direction.
I32 hwHighwayMaxRoamDistance	1.3.6.1.4.1.2011.6.139.11.1.90.2.1.8	Integer32	read-write	This object indicates member max roam distance.
OCT hwHighwayMemberName	1.3.6.1.4.1.2011.6.139.11.1.90.2.1.4	OCTET STRING	read-write	This object indicates member name.
ROW hwHighwayMemberRowStatus	1.3.6.1.4.1.2011.6.139.11.1.90.2.1.15	RowStatus	read-write	This object indicates the highway member status.
INT hwHighwayMemberStatus	1.3.6.1.4.1.2011.6.139.11.1.90.2.1.9	INTEGER	read-only	This object indicates member status.
INT hwHighwayMemberType	1.3.6.1.4.1.2011.6.139.11.1.90.2.1.3	INTEGER	read-write	This object indicates member type.
I32 hwHighwayMinRoamDistance	1.3.6.1.4.1.2011.6.139.11.1.90.2.1.7	Integer32	read-write	This object indicates member min roam distance.
OCT hwHighwayNextMemberName	1.3.6.1.4.1.2011.6.139.11.1.90.2.1.6	OCTET STRING	read-write	This object indicates member name.
hwHighwayObjects	1.3.6.1.4.1.2011.6.139.11.1.90
hwHighwayProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.90.1.1		not-accessible	The indexes of this table are hwHighwayProfileName.
OCT hwHighwayProfileName	1.3.6.1.4.1.2011.6.139.11.1.90.1.1.1	OCTET STRING	read-write	This object indicates the Highway Profile name. It is the index of the table.
ROW hwHighwayProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.90.1.1.10	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
hwHighwayProfileTable	1.3.6.1.4.1.2011.6.139.11.1.90.1		not-accessible	This table is used to configure highway profile information.
INT hwHighwayRadioType	1.3.6.1.4.1.2011.6.139.11.1.90.2.1.1	INTEGER	read-write	This object indicates radiotype.
I32 hwHighwayStationMinSpeed	1.3.6.1.4.1.2011.6.139.11.1.90.1.1.2	Integer32	read-write	This object indicates the minimum movement speed of a STA, in km/h. The default value is 36.
INT hwHotspot2CarryP2PCrossConnectInfo	1.3.6.1.4.1.2011.6.139.11.1.45.1.11	INTEGER	read-write	This object indicates whether hot spot networks allow P2P devices to set up cross connections. Currently, this function is supported. The default value is 2.
OCT hwHotspot2CellularNetworkProfile	1.3.6.1.4.1.2011.6.139.11.1.45.1.12	OCTET STRING	read-write	This object indicates the bound cellular network profile. By default, no cellular network profile is bound.
OCT hwHotspot2ConnectionCapabilityProfile	1.3.6.1.4.1.2011.6.139.11.1.45.1.13	OCTET STRING	read-write	This object indicates the bound connection capability profile. By default, no connection capability profile is bound.
MAC hwHotspot2Hessid	1.3.6.1.4.1.2011.6.139.11.1.45.1.6	MacAddress	read-write	This object indicates the HESSID of a hot spot network. The default value is null, indicating that no configuration is added.
INT hwHotspot2InternetAccess	1.3.6.1.4.1.2011.6.139.11.1.45.1.3	INTEGER	read-write	This object indicates that the Internet attribute is an interworking information element. This configuration is mandatory. The AP adds this information to Beacon and Probe Response packets, which indicates whether users are allowed to access the Internet, to assist users in discovering and selecting networks. The default value is 2.
U32 hwHotspot2IPv4AddressAvail	1.3.6.1.4.1.2011.6.139.11.1.45.1.7	Unsigned32	read-write	This object indicates available types of IPv4 addresses. 8 to 63 are reserved. The default value 0xFFFFFFFF indicates that no configuration is added.0: Address type not available.1: Public IPv4 address available,2: Port-restricted IPv4 address available,3: Single NATed private IPv4 address available,4: Double NATed private IPv4 address available,5: Port-restricted IPv4 address and single NATed IPv4 address available,6: Port-restricted IPv4 address and double NATed IPv4 address available,7: Availability of the address type is not known,8 to 63: Reserved
U32 hwHotspot2IPv6AddressAvail	1.3.6.1.4.1.2011.6.139.11.1.45.1.8	Unsigned32	read-write	This object indicates available types of IPv4 addresses. 3 is reserved. The default value 0xFFFFFFFF indicates that no configuration is added.0: Address type not available1: Address type available2: Availability of the address type not known3: Reserved
OCT hwHotspot2NaiRealmProfile	1.3.6.1.4.1.2011.6.139.11.1.45.1.17	OCTET STRING	read-write	This object indicates the bound NAI realm profile. By default, no NAI realm profile is bound.
U32 hwHotspot2NetworkAuthenType	1.3.6.1.4.1.2011.6.139.11.1.45.1.9	Unsigned32	read-write	This object indicates the network authentication type. 4 to 255 are reserved. The default value 0xFFFFFFFF indicates that no configuration is added.0: Acceptance of terms and conditions.1: On-line enrollment supported,2: http/https redirection,3: DNS redirection,4 to 255: Reserved
U32 hwHotspot2NetworkType	1.3.6.1.4.1.2011.6.139.11.1.45.1.2	Unsigned32	read-write	This object indicates that the network type is an interworking information element. This configuration is mandatory. The AP adds this information to Beacon and Probe Response packets, which indicates network types, to assist users in discovering and selecting networks. The default value is 15.0: Private-network1: private-guest2: public-chargeable3: public-free4: personal-device5: emergency-service14: Test15: Wildcard
OCT hwHotspot2OperatingClassProfile	1.3.6.1.4.1.2011.6.139.11.1.45.1.15	OCTET STRING	read-write	This object indicates the bound operating class profile. By default, no operating class profile is bound.
OCT hwHotspot2OperatorDomainProfile	1.3.6.1.4.1.2011.6.139.11.1.45.1.16	OCTET STRING	read-write	This object indicates the bound operator domain profile. By default, no operator domain profile is bound.
OCT hwHotspot2OperatorNameProfile	1.3.6.1.4.1.2011.6.139.11.1.45.1.14	OCTET STRING	read-write	This object indicates the bound operator name profile. By default, no operator name profile is bound.
hwHotspot2ProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.45.1		not-accessible	The index of this table is hwHotspot2ProfileName.
hwHotspot2ProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.39			Description.
OCT hwHotspot2ProfileName	1.3.6.1.4.1.2011.6.139.11.1.45.1.1	OCTET STRING	not-accessible	This object indicates the name of a Hotspot2.0 profile. It is the index of the table.
ROW hwHotspot2ProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.45.1.20	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.ROWSTATUS_UNDEFINED: undefinedROWSTATUS_ACTIVE: activeROWSTATUS_NOTINSERVICE: notInServiceROWSTATUS_NOTREADY: notReadyROWSTATUS_CREATEANDFLOW: createAndGoROWSTATUS_CREATEANDWAIT: createAndWaitROWSTATUS_DESTROY: destroy
hwHotspot2ProfileTable	1.3.6.1.4.1.2011.6.139.11.1.45		not-accessible	This table is used to configure and query Hotspot2.0 profile parameters.
OCT hwHotspot2RedirectUrl	1.3.6.1.4.1.2011.6.139.11.1.45.1.10	OCTET STRING	read-write	This object indicates the redirection URL.This parameter is optional when Network Authentication Type is set to acceptance.This parameter is mandatory when Network Authentication Type is set to http-https-redirection.This parameter is not configurable when Network Authentication Type is set to other values.
OCT hwHotspot2RoamingConsortiumProfile	1.3.6.1.4.1.2011.6.139.11.1.45.1.19	OCTET STRING	read-write	This object indicates the bound roaming consortium profile. By default, no roaming consortium profile is bound.
U32 hwHotspot2VenueGroupCode	1.3.6.1.4.1.2011.6.139.11.1.45.1.4	Unsigned32	read-write	For details, see Table 7-25m-Venue Group codes and descriptions in the 802.11u protocol. The default value 0xFFFFFFFF indicates that no configuration is added.
OCT hwHotspot2VenueNameProfile	1.3.6.1.4.1.2011.6.139.11.1.45.1.18	OCTET STRING	read-write	This object indicates the bound venue name profile. By default, no venue name profile is bound.
U32 hwHotspot2VenueTypeCode	1.3.6.1.4.1.2011.6.139.11.1.45.1.5	Unsigned32	read-write	For details, see Table 7-25n-Venue Type assignments in the 802.11u protocol. The default value 0xFFFFFFFF indicates that no configuration is added.
OCT hwIDIndexedAPSp5gRadioProfile	1.3.6.1.4.1.2011.6.139.11.1.71.1.2	OCTET STRING	read-write	This object indicates the bound 5G radio profile.
INT hwIDIndexedAPSpAutoBandwidthSelectSwitch	1.3.6.1.4.1.2011.6.139.11.1.71.1.29	INTEGER	read-write	This object indicates the status of the automatic bandwidth selection function. The default value is 255.
INT hwIDIndexedAPSpAutoChannelSelectSwitch	1.3.6.1.4.1.2011.6.139.11.1.71.1.23	INTEGER	read-write	This object indicates the status of the automatic channel selection function.
INT hwIDIndexedAPSpAutoTxPowerSelectSwitch	1.3.6.1.4.1.2011.6.139.11.1.71.1.24	INTEGER	read-write	This object indicates the status of the automatic power selection function.
hwIDIndexedAPSpecificRadioEntry	1.3.6.1.4.1.2011.6.139.11.1.71.1		not-accessible	Indexes of this table are hwIDIndexedAPSpRadio and hwWlanIDIndexedAPSpApId.
hwIDIndexedAPSpecificRadioTable	1.3.6.1.4.1.2011.6.139.11.1.71		not-accessible	This table records the information about profiles bound based on radio in an AP specific profile, including 5G radio profile, Mesh profile, WDS profile, WIDS profile, location profile, and spectrum profile.
hwIDIndexedAPSpecificVapEntry	1.3.6.1.4.1.2011.6.139.11.1.72.1		not-accessible	Indexes of this table are hwIDIndexedAPSpWlan, hwIDIndexedAPSpRadio, and hwWlanIDIndexedAPSpApId.
hwIDIndexedAPSpecificVapTable	1.3.6.1.4.1.2011.6.139.11.1.72		not-accessible	This table is used to create VAPs in an AP specific profile.
hwIDIndexedAPSpecificWiredPortEntry	1.3.6.1.4.1.2011.6.139.11.1.70.1		not-accessible	Indexes of this table are hwIDIndexedAPSpWPInterfaceType, hwIDIndexedAPSpWPInterfaceNum and hwWlanIDIndexedAPSpApId.
hwIDIndexedAPSpecificWiredPortTable	1.3.6.1.4.1.2011.6.139.11.1.70		not-accessible	This table is used to bind an AP wired port profile to an AP specific profile or unbind an AP wired port profile from an AP specific profile..
OCT hwIDIndexedAPSpLocationProfile	1.3.6.1.4.1.2011.6.139.11.1.71.1.5	OCTET STRING	read-write	This object indicates the bound location profile.
OCT hwIDIndexedAPSpMeshProfile	1.3.6.1.4.1.2011.6.139.11.1.71.1.3	OCTET STRING	read-write	This object indicates the bound Mesh profile.
OCT hwIDIndexedAPSpMeshWhitelistProfile	1.3.6.1.4.1.2011.6.139.11.1.71.1.7	OCTET STRING	read-write	This object indicates the bound whitelist profile.
U32 hwIDIndexedAPSpRadio	1.3.6.1.4.1.2011.6.139.11.1.71.1.1	Unsigned32	not-accessible	This object indicates the radio ID. It is the index of the table.
OCT hwIDIndexedAPSpRadio2gProfile	1.3.6.1.4.1.2011.6.139.11.1.71.1.6	OCTET STRING	read-write	This object indicates the system profile to which AP groups are bound. The default value is default.
I32 hwIDIndexedAPSpRadioAntennaGain	1.3.6.1.4.1.2011.6.139.11.1.71.1.13	Integer32	read-write	This object indicates antenna gains. The default value 0xFF indicates that the default gain of an AP is used. It is expressed in dB. Default gains vary with different types of APs.
INT hwIDIndexedAPSpRadioBandwidth	1.3.6.1.4.1.2011.6.139.11.1.71.1.11	INTEGER	read-write	This object indicate a bandwidth. The default value is 1.
INT hwIDIndexedAPSpRadioCalibrateFlexibleRadio	1.3.6.1.4.1.2011.6.139.11.1.71.1.28	INTEGER	read-write	This object indicates the status of calibrate flexible-radio. The default value is 255.
U32 hwIDIndexedAPSpRadioChannel	1.3.6.1.4.1.2011.6.139.11.1.71.1.10	Unsigned32	read-write	This object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 196 (with a separation interval of 4).
U32 hwIDIndexedAPSpRadioCoverageDistance	1.3.6.1.4.1.2011.6.139.11.1.71.1.14	Unsigned32	read-write	This object indicates a radio coverage distance. The default value is 3. The unit is 0.1 km.
U32 hwIDIndexedAPSpRadioEirp	1.3.6.1.4.1.2011.6.139.11.1.71.1.12	Unsigned32	read-write	This object indicates a power value. The default value is 127(from V2R8C10; The default value is 255 before V2R8C10.). The configuration is saved but the actual power is determined by the maximum power supported by the AP.
INT hwIDIndexedAPSpRadioFrequency	1.3.6.1.4.1.2011.6.139.11.1.71.1.16	INTEGER	read-write	This object indicates the setting of the frequency band for radio 0. The default value is invalid. 1: frequency2G, 2: frequency5G.
ROW hwIDIndexedAPSpRadioRowStatus	1.3.6.1.4.1.2011.6.139.11.1.71.1.21	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
U32 hwIDIndexedAPSpRadioSecondChannel	1.3.6.1.4.1.2011.6.139.11.1.71.1.22	Unsigned32	read-write	This object indicates a second radio-frequency channel.The value ranges from 42,58,106,122,138,155.
INT hwIDIndexedAPSpRadioSwitch	1.3.6.1.4.1.2011.6.139.11.1.71.1.9	INTEGER	read-write	This object indicates the name of a 2G radio profile. It is the index of the table.
INT hwIDIndexedAPSpRadioWorkMode	1.3.6.1.4.1.2011.6.139.11.1.71.1.15	INTEGER	read-write	This object indicates the radio working mode. The default value is 1.
INT hwIDIndexedAPSpReferenceDataAnalysis	1.3.6.1.4.1.2011.6.139.11.1.71.1.30	INTEGER	read-write	This object indicates the status of the referencing data-analysis function. The default value is 255.
INT hwIDIndexedAPSpSfnRoamBeaconSwitch	1.3.6.1.4.1.2011.6.139.11.1.71.1.26	INTEGER	read-write	This object indicates the status of Beacon Switch. The default value is 255.
U32 hwIDIndexedAPSpSfnRoamCtsDelay	1.3.6.1.4.1.2011.6.139.11.1.71.1.27	Unsigned32	read-write	This object indicates Cts Delay time. The default value is 0.
INT hwIDIndexedAPSpSfnRoamCtsSwitch	1.3.6.1.4.1.2011.6.139.11.1.71.1.25	INTEGER	read-write	This object indicates the status of Cts Switch. The default value is 255.
INT hwIDIndexedAPSpSpectrumAnalysisSwitch	1.3.6.1.4.1.2011.6.139.11.1.71.1.17	INTEGER	read-write	This object indicates the status of the spectrum analysis function. The default value is 1.
OCT hwIDIndexedAPSpVapProfile	1.3.6.1.4.1.2011.6.139.11.1.72.1.2	OCTET STRING	read-write	This object indicates the bound VAP profile.
ROW hwIDIndexedAPSpVapRowStatus	1.3.6.1.4.1.2011.6.139.11.1.72.1.3	RowStatus	read-write	This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
U32 hwIDIndexedAPSpVapServiceVlan	1.3.6.1.4.1.2011.6.139.11.1.72.1.4	Unsigned32	read-write	This object indicates the service VLAN for the VAP. The invalid value is 0.
OCT hwIDIndexedAPSpVapVlanPool	1.3.6.1.4.1.2011.6.139.11.1.72.1.5	OCTET STRING	read-write	This object indicates the VLAN pool to which the VAP is bound.
OCT hwIDIndexedAPSpWdsProfile	1.3.6.1.4.1.2011.6.139.11.1.71.1.4	OCTET STRING	read-write	This object indicates the bound WDS profile.
OCT hwIDIndexedAPSpWdsWhitelistProfile	1.3.6.1.4.1.2011.6.139.11.1.71.1.8	OCTET STRING	read-write	This object indicates the bound whitelist profile.
U32 hwIDIndexedAPSpWidsAttackDetectEnBmp	1.3.6.1.4.1.2011.6.139.11.1.71.1.19	Unsigned32	read-write	This object indicates the bit map of the brute force attack switch. bit0:weak-iv, bit1:spoof, bit2:flood, bit3:wpa-psk, bit4:wpa2-psk, bit5:wapi-psk, bit6:wep-psk.
INT hwIDIndexedAPSpWidsAttackDetectFlood	1.3.6.1.4.1.2011.6.139.11.1.71.1.33	INTEGER	read-write	This object indicates flood attack detection. The default value is 255.
INT hwIDIndexedAPSpWidsAttackDetectSpoof	1.3.6.1.4.1.2011.6.139.11.1.71.1.32	INTEGER	read-write	This object indicates spoofing attack detection. The default value is 255.
INT hwIDIndexedAPSpWidsAttackDetectWapiPsk	1.3.6.1.4.1.2011.6.139.11.1.71.1.36	INTEGER	read-write	This object indicates brute force attack detection in WAPI-PSK authentication. The default value is 255.
INT hwIDIndexedAPSpWidsAttackDetectWeakIv	1.3.6.1.4.1.2011.6.139.11.1.71.1.31	INTEGER	read-write	This object indicates weak IV attack detection. The default value is 255.
INT hwIDIndexedAPSpWidsAttackDetectWepShareKey	1.3.6.1.4.1.2011.6.139.11.1.71.1.37	INTEGER	read-write	This object indicates brute force attack detection in WEP shared key authentication. The default value is 255.
INT hwIDIndexedAPSpWidsAttackDetectWpa2Psk	1.3.6.1.4.1.2011.6.139.11.1.71.1.35	INTEGER	read-write	This object indicates brute force attack detection in WPA2-PSK authentication. The default value is 255.
INT hwIDIndexedAPSpWidsAttackDetectWpaPsk	1.3.6.1.4.1.2011.6.139.11.1.71.1.34	INTEGER	read-write	This object indicates brute force attack detection in WPA-PSK authentication. The default value is 255.
INT hwIDIndexedAPSpWidsDeviceDetectSwitch	1.3.6.1.4.1.2011.6.139.11.1.71.1.18	INTEGER	read-write	This object indicates the status of the device detection function. The default value is 1.
INT hwIDIndexedAPSpWidsRogueContainSwitch	1.3.6.1.4.1.2011.6.139.11.1.71.1.20	INTEGER	read-write	This object indicates the status of the device detection function. The default value is 1.
U32 hwIDIndexedAPSpWlan	1.3.6.1.4.1.2011.6.139.11.1.72.1.1	Unsigned32	not-accessible	This object indicates the WLAN ID. It is the index of the table.
U32 hwIDIndexedAPSpWPInterfaceNum	1.3.6.1.4.1.2011.6.139.11.1.70.1.2	Unsigned32	not-accessible	This object indicates the interface index.
INT hwIDIndexedAPSpWPInterfaceType	1.3.6.1.4.1.2011.6.139.11.1.70.1.1	INTEGER	not-accessible	This object indicates the interface type.
OCT hwIDIndexedAPSpWPProfile	1.3.6.1.4.1.2011.6.139.11.1.70.1.3	OCTET STRING	read-write	This object indicates the bound wired port profile.
ROW hwIDIndexedAPSpWPRowStatus	1.3.6.1.4.1.2011.6.139.11.1.70.1.4	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.
INT hwIoTProfileAntennaStatus	1.3.6.1.4.1.2011.6.139.11.1.77.1.7	INTEGER	read-write	This object indicates the antenna status of card.
IP hwIoTProfileConfigAgentPermitIp	1.3.6.1.4.1.2011.6.139.11.1.77.1.2	IpAddress	read-write	Description.
U32 hwIoTProfileConfigAgentPermitMaskLen	1.3.6.1.4.1.2011.6.139.11.1.77.1.3	Unsigned32	read-write	Description.
hwIoTProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.77.1		not-accessible	Description.
hwIoTProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.70			Description.
OCT hwIoTProfileManagementServerDomain	1.3.6.1.4.1.2011.6.139.11.1.78.1.5	OCTET STRING	read-write	Description.
hwIoTProfileManagementServerEntry	1.3.6.1.4.1.2011.6.139.11.1.78.1		not-accessible	Description.
hwIoTProfileManagementServerGroups	1.3.6.1.4.1.2011.6.139.11.2.2.71			Description.
U32 hwIoTProfileManagementServerIndex	1.3.6.1.4.1.2011.6.139.11.1.78.1.1	Unsigned32	not-accessible	Description.
IP hwIoTProfileManagementServerIp	1.3.6.1.4.1.2011.6.139.11.1.78.1.2	IpAddress	read-write	Description.
U32 hwIoTProfileManagementServerPort	1.3.6.1.4.1.2011.6.139.11.1.78.1.3	Unsigned32	read-write	Description.
ROW hwIoTProfileManagementServerRowStatus	1.3.6.1.4.1.2011.6.139.11.1.78.1.4	RowStatus	read-write	Description.
hwIoTProfileManagementServerTable	1.3.6.1.4.1.2011.6.139.11.1.78		not-accessible	Description.
OCT hwIoTProfileName	1.3.6.1.4.1.2011.6.139.11.1.77.1.1	OCTET STRING	not-accessible	Description.
ROW hwIoTProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.77.1.5	RowStatus	read-write	Description.
OCT hwIoTProfileShareKey	1.3.6.1.4.1.2011.6.139.11.1.77.1.4	OCTET STRING	read-write	Description.
hwIoTProfileTable	1.3.6.1.4.1.2011.6.139.11.1.77		not-accessible	Description.
INT hwIoTProfileType	1.3.6.1.4.1.2011.6.139.11.1.77.1.6	INTEGER	read-write	This object indicates the profile type. The default value is 0.
INT hwIoTSerialFrameFormat	1.3.6.1.4.1.2011.6.139.11.1.76.1.5	INTEGER	read-write	Description.
U32 hwIoTSerialFrameLength	1.3.6.1.4.1.2011.6.139.11.1.76.1.6	Unsigned32	read-write	Description.
U32 hwIoTSerialFrameStart	1.3.6.1.4.1.2011.6.139.11.1.76.1.7	Unsigned32	read-write	Description.
U32 hwIoTSerialFrameStop	1.3.6.1.4.1.2011.6.139.11.1.76.1.8	Unsigned32	read-write	Description.
INT hwIoTSerialParity	1.3.6.1.4.1.2011.6.139.11.1.76.1.3	INTEGER	read-write	Description.
hwIoTSerialProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.76.1		not-accessible	Description.
hwIoTSerialProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.69			Description.
OCT hwIoTSerialProfileName	1.3.6.1.4.1.2011.6.139.11.1.76.1.1	OCTET STRING	not-accessible	Description.
ROW hwIoTSerialProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.76.1.9	RowStatus	read-write	Description.
hwIoTSerialProfileTable	1.3.6.1.4.1.2011.6.139.11.1.76		not-accessible	Description.
U32 hwIoTSerialSpeed	1.3.6.1.4.1.2011.6.139.11.1.76.1.2	Unsigned32	read-write	Description.
INT hwIoTSerialStopbits	1.3.6.1.4.1.2011.6.139.11.1.76.1.4	INTEGER	read-write	Description.
U32 hwLocationAeroscoutCompoundTime	1.3.6.1.4.1.2011.6.139.11.1.43.1.7	Unsigned32	read-write	This object indicates the AerosScout location data compound time. The value 0 indicates that data is not compounded and the AP reports location data in real time. The default value is 65535 and the unit is 0.1s.
INT hwLocationAeroscoutMuSwitch	1.3.6.1.4.1.2011.6.139.11.1.43.1.3	INTEGER	read-write	This object indicates the status of the AeroScout MU location function. The default value is 1.
U32 hwLocationAeroscoutServerPort	1.3.6.1.4.1.2011.6.139.11.1.43.1.4	Unsigned32	read-write	This object indicates the port used by APs or ACs to report AeroScout location data to the AE server.
INT hwLocationAeroscoutTagSwitch	1.3.6.1.4.1.2011.6.139.11.1.43.1.2	INTEGER	read-write	This object indicates the status of the AeroScout tag location function. The default value is 1.
U32 hwLocationAeroscoutViaACPort	1.3.6.1.4.1.2011.6.139.11.1.43.1.6	Unsigned32	read-write	This object indicates that AeroScout location data is reported to the AC that forwards the data to the AE. A port is configured for the AP to report location data to the AC. The value ranges from 1025 to 65535. The value 0 indicates ViaACSwitch is disable.
INT hwLocationAeroscoutViaACSwitch	1.3.6.1.4.1.2011.6.139.11.1.43.1.5	INTEGER	read-write	This object indicates whether AeroScout tag location data is reported to the AC. This parameter has no default value.
I32 hwLocationCollectLocationDataRSSIThreshold	1.3.6.1.4.1.2011.6.139.11.1.43.1.48	Integer32	read-write	This object indicates the collect location data rssi threshold. The default value is -75
INT hwLocationCollectLocationDataSwitch	1.3.6.1.4.1.2011.6.139.11.1.43.1.47	INTEGER	read-write	This object indicates whether collect location data enable. The default value is 1.1: Disable2: Enable
IP hwLocationEkahauServerIPAddress	1.3.6.1.4.1.2011.6.139.11.1.43.1.9	IpAddress	read-write	This object indicates the IP address of the location server for Ekahau tag location.
OCT hwLocationEkahauServerIPv6Address	1.3.6.1.4.1.2011.6.139.11.1.43.1.10	OCTET STRING	read-write	This object indicates the IPv6 address of the location server for Ekahau tag location.
U32 hwLocationEkahauServerPort	1.3.6.1.4.1.2011.6.139.11.1.43.1.11	Unsigned32	read-write	This object indicates the port number of the location server for Ekahau tag location.
INT hwLocationEkahauTagEnable	1.3.6.1.4.1.2011.6.139.11.1.43.1.8	INTEGER	read-write	This object indicates the status of the Ekahau tag location function. The default value is 1.
INT hwLocationEkahauViaACEnable	1.3.6.1.4.1.2011.6.139.11.1.43.1.12	INTEGER	read-write	This object indicates whether Ekahau tag location data is reported to the AC.
U32 hwLocationEkahauViaACPort	1.3.6.1.4.1.2011.6.139.11.1.43.1.13	Unsigned32	read-write	This object indicates that Ekahau location data is reported to the AC that forwards the data to the AE. A port is configured for the AP to report location data to the AC.
OCT hwLocationPaiboIV	1.3.6.1.4.1.2011.6.139.11.1.43.1.32	OCTET STRING	read-write	This object indicates the iv of paibo server.
INT hwLocationPaiboMuEnable	1.3.6.1.4.1.2011.6.139.11.1.43.1.25	INTEGER	read-write	This object indicates whether Paibo terminal location data is reported to the AC. The default value is 1.1: Disable2: Enable
OCT hwLocationPaiboPSK	1.3.6.1.4.1.2011.6.139.11.1.43.1.31	OCTET STRING	read-write	This object indicates the psk of paibo server.
U32 hwLocationPaiboReportFrequency	1.3.6.1.4.1.2011.6.139.11.1.43.1.26	Unsigned32	read-write	This object indicates the interval for the AP to report location data in Paibo terminal location mode. The default value is 60000 ms.
IP hwLocationPaiboServerIPAddress	1.3.6.1.4.1.2011.6.139.11.1.43.1.27	IpAddress	read-write	This object indicates the IP address of the server for the Paibo location function.
OCT hwLocationPaiboServerIPv6Address	1.3.6.1.4.1.2011.6.139.11.1.43.1.28	OCTET STRING	read-write	This object indicates the IPv6 address of the server for the Paibo location function.
U32 hwLocationPaiboServerPort	1.3.6.1.4.1.2011.6.139.11.1.43.1.29	Unsigned32	read-write	This object indicates the port number of the server for the Paibo location function.
U32 hwLocationPaiboViaACPort	1.3.6.1.4.1.2011.6.139.11.1.43.1.30	Unsigned32	read-write	This object indicates the port number of the server for the Paibo location function.
INT hwLocationPrivateMuEnable	1.3.6.1.4.1.2011.6.139.11.1.43.1.16	INTEGER	read-write	This object indicates the status of the Huawei proprietary terminal location function. The default value is 1.
OCT hwLocationPrivateMUVersion	1.3.6.1.4.1.2011.6.139.11.1.43.1.33	OCTET STRING	read-write	This object indicates the protocol version of the Huawei proprietary terminal location function. The default value is v3.
INT hwLocationPrivateProtocol	1.3.6.1.4.1.2011.6.139.11.1.43.1.35	INTEGER	read-write	This object indicates the report protocol for the Huawei proprietary location function. The default value is 1. The Value of https(2) is not support since V200R019C10.
U32 hwLocationPrivateReportFrequency	1.3.6.1.4.1.2011.6.139.11.1.43.1.22	Unsigned32	read-write	This object indicates the interval for the AP to report location data in Huawei proprietary terminal location mode. The default value is 20000 ms.
OCT hwLocationPrivateServerAddressDomain	1.3.6.1.4.1.2011.6.139.11.1.43.1.34	OCTET STRING	read-write	This object indicates the domain of the server for the Huawei proprietary location function.
IP hwLocationPrivateServerIPAddress	1.3.6.1.4.1.2011.6.139.11.1.43.1.17	IpAddress	read-write	This object indicates the IP address of the server for the Huawei proprietary location function.
OCT hwLocationPrivateServerIPv6Address	1.3.6.1.4.1.2011.6.139.11.1.43.1.18	OCTET STRING	read-write	This object indicates the IPv6 address of the server for the Huawei proprietary location function.
U32 hwLocationPrivateServerPort	1.3.6.1.4.1.2011.6.139.11.1.43.1.19	Unsigned32	read-write	This object indicates the port number of the server for the Huawei proprietary location function.
OCT hwLocationPrivateSSLPolicyName	1.3.6.1.4.1.2011.6.139.11.1.43.1.36	OCTET STRING	read-write	This object indicates the ssl policy name for the Huawei proprietary location function.
INT hwLocationPrivateViaACEnable	1.3.6.1.4.1.2011.6.139.11.1.43.1.20	INTEGER	read-write	This object indicates whether Huawei proprietary terminal location data is reported to the AC. The default value is 2.1: Enable2: Disable
U32 hwLocationPrivateViaACPort	1.3.6.1.4.1.2011.6.139.11.1.43.1.21	Unsigned32	read-write	This object indicates that Huawei proprietary terminal location data is reported to the AC that forwards the data to the location server. A port is configured for the AP to report location data to the AC. The default destination IP address and port number to which the AP reports terminal location data is the AC's IP address and 6411 respectively.
OCT hwLocationProfileAeroscoutShareKey	1.3.6.1.4.1.2011.6.139.11.1.43.1.24	OCTET STRING	read-write	This object indicates the sharekey of the aeroscout server.
hwLocationProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.43.1		not-accessible	The index of this table is hwLocationProfileName.
hwLocationProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.37			Description.
OCT hwLocationProfileName	1.3.6.1.4.1.2011.6.139.11.1.43.1.1	OCTET STRING	not-accessible	This object indicates the name of a location profile. It is the index of the table.
ROW hwLocationProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.43.1.23	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.ROWSTATUS_UNDEFINED: undefinedROWSTATUS_ACTIVE: activeROWSTATUS_NOTINSERVICE: notInServiceROWSTATUS_NOTREADY: notReadyROWSTATUS_CREATEANDFLOW: createAndGoROWSTATUS_CREATEANDWAIT: createAndWaitROWSTATUS_DESTROY: destroy
hwLocationProfileTable	1.3.6.1.4.1.2011.6.139.11.1.43		not-accessible	This table is used to configure terminal location and tag location.
IP hwLocationSourceIPAddress	1.3.6.1.4.1.2011.6.139.11.1.43.1.14	IpAddress	read-write	This object indicates the source IPv4 address for reporting location data in AeroScout or Ekahau location mode. You choose an IPv4 or IPv6 address.
OCT hwLocationSourceIPv6Address	1.3.6.1.4.1.2011.6.139.11.1.43.1.15	OCTET STRING	read-write	This object indicates the source IPv6 address for reporting location data in AeroScout or Ekahau location mode. You choose an IPv4 or IPv6 address.
INT hwLocationSurFilterCompress	1.3.6.1.4.1.2011.6.139.11.1.43.1.46	INTEGER	read-write	This object indicates whether the Surfilter terminal location data reported to the AC is compressed. The default value is 1. 1: Compress 2: Uncompress
OCT hwLocationSurFilterDataSourceID	1.3.6.1.4.1.2011.6.139.11.1.43.1.45	OCTET STRING	read-write	This object indicates the data source ID of the server for the Surfilter location function.
INT hwLocationSurFilterMuEnable	1.3.6.1.4.1.2011.6.139.11.1.43.1.37	INTEGER	read-write	This object indicates whether Surfilter terminal location data is reported to the AC. The default value is 1. 1: Disable 2: Enable
OCT hwLocationSurFilterPassword	1.3.6.1.4.1.2011.6.139.11.1.43.1.44	OCTET STRING	read-write	This object indicates the password of the server for the Surfilter location function.
U32 hwLocationSurFilterReportFrequency	1.3.6.1.4.1.2011.6.139.11.1.43.1.38	Unsigned32	read-write	This object indicates the protoc for the AP to report location data in Surfilter terminal location mode. The default value is 60000 ms.
INT hwLocationSurFilterReportProtocol	1.3.6.1.4.1.2011.6.139.11.1.43.1.39	INTEGER	read-write	This object indicates the protocol using for the AP to report location data in Surfilter terminal location mode. The default protocol is sftp.
IP hwLocationSurFilterServerIPAddress	1.3.6.1.4.1.2011.6.139.11.1.43.1.40	IpAddress	read-write	This object indicates the IP address of the server for the Surfilter location function.
U32 hwLocationSurFilterServerPort	1.3.6.1.4.1.2011.6.139.11.1.43.1.41	Unsigned32	read-write	This object indicates the port number of the server for the Surfilter location function.
OCT hwLocationSurFilterUserName	1.3.6.1.4.1.2011.6.139.11.1.43.1.43	OCTET STRING	read-write	This object indicates the user name of the server for the Surfilter location function.
U32 hwLocationSurFilterViaACPort	1.3.6.1.4.1.2011.6.139.11.1.43.1.42	Unsigned32	read-write	This object indicates the port number of the server for the Surfilter location function.
hwMeshHandoverProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.34			Description.
hwMeshProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.32			Description.
hwMeshWhitelistProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.33			Description.
U32 hwNAIRealmEapAuthenID	1.3.6.1.4.1.2011.6.139.11.1.51.1.4	Unsigned32	not-accessible	This object indicates the authorization ID. The default value is 0xffffffff that indicates that all IDs within the value range are supported.
U32 hwNAIRealmEapAuthenPara	1.3.6.1.4.1.2011.6.139.11.1.51.1.5	Unsigned32	read-write	This object indicate authorization parameter. The default value is 0xffffffff that indicates all parameters within the value range are supported.
U32 hwNAIRealmEapMethodType	1.3.6.1.4.1.2011.6.139.11.1.51.1.3	Unsigned32	not-accessible	This object indicates the authorization type. The default value is 0xffffffff that indicates that the following four types are supported: EAP_AKA, EAP_SIM, EAP_TLS, and EAP_TTLS.
OCT hwNAIRealmName	1.3.6.1.4.1.2011.6.139.11.1.51.1.2	OCTET STRING	not-accessible	This object indicates a network identifier.
hwNAIRealmProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.51.1		not-accessible	Indexes of this table are hwNAIRealmProfileName, hwNAIRealmName, hwNAIRealmEapMethodType, and hwNAIRealmEapAuthenID.
hwNAIRealmProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.45			Description.
hwNAIRealmProfileListEntry	1.3.6.1.4.1.2011.6.139.11.1.61.1		not-accessible	The index of this table is hwNAIRealmProfileListProfileName.
OCT hwNAIRealmProfileListProfileName	1.3.6.1.4.1.2011.6.139.11.1.61.1.1	OCTET STRING	not-accessible	This object indicates the profile name.
ROW hwNAIRealmProfileListRowStatus	1.3.6.1.4.1.2011.6.139.11.1.61.1.2	RowStatus	read-write	This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
hwNAIRealmProfileListTable	1.3.6.1.4.1.2011.6.139.11.1.61		not-accessible	This table describes the NAI realm profile.
OCT hwNAIRealmProfileName	1.3.6.1.4.1.2011.6.139.11.1.51.1.1	OCTET STRING	not-accessible	This object indicates the name of a NAI realm profile. It is the index of the table.
ROW hwNAIRealmProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.51.1.6	RowStatus	read-write	This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
hwNAIRealmProfileTable	1.3.6.1.4.1.2011.6.139.11.1.51		not-accessible	This table is used to configure and query NAI realm profile parameters.
OCT hwOperatorClassIndicationList	1.3.6.1.4.1.2011.6.139.11.1.49.1.2	OCTET STRING	read-write	NOTE By default, no configuration is added.A value of OperatorClassIndication is an integer that ranges from 1 to 255.A maximum of 32 OperatorClassIndication values can be configured.
hwOperatorClassProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.49.1		not-accessible	The index of this table is hwOperatorClassProfileName.
hwOperatorClassProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.43			Description.
OCT hwOperatorClassProfileName	1.3.6.1.4.1.2011.6.139.11.1.49.1.1	OCTET STRING	not-accessible	This object indicates the name of an operating class profile profile. It is the index of the table.
ROW hwOperatorClassProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.49.1.3	RowStatus	read-write	This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
hwOperatorClassProfileTable	1.3.6.1.4.1.2011.6.139.11.1.49		not-accessible	This table is used to configure operating class profile parameters.
OCT hwOperatorDomainNameList	1.3.6.1.4.1.2011.6.139.11.1.50.1.2	OCTET STRING	read-write	NOTE By default, no configuration is added.A DomainName value is a string of 1-64 characters in compliance with RFC1035.DomainName values are separated by question marks (?).A maximum of 32 DomainName values can be configured.
hwOperatorDomainNameProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.50.1		not-accessible	The index of this table is hwOperatorDomainNameProfileName.
hwOperatorDomainNameProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.44			Description.
OCT hwOperatorDomainNameProfileName	1.3.6.1.4.1.2011.6.139.11.1.50.1.1	OCTET STRING	not-accessible	This object indicates the name of an operating class profile profile. It is the index of the table.
ROW hwOperatorDomainNameProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.50.1.3	RowStatus	read-write	This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
hwOperatorDomainNameProfileTable	1.3.6.1.4.1.2011.6.139.11.1.50		not-accessible	This table is used to configure and query operator domain profile parameters.
OCT hwOperatorFriendlyNameList	1.3.6.1.4.1.2011.6.139.11.1.48.1.3	OCTET STRING	read-write	NOTE By default, no configuration is added.A FriendlyName value is a string of 1-32 characters. FriendlyName values are separated by question marks (?).A maximum of 32 FriendlyName values can be configured.A LanguageCode value must match a FriendlyName value.
OCT hwOperatorNameLanguageCodeList	1.3.6.1.4.1.2011.6.139.11.1.48.1.2	OCTET STRING	read-write	A value of LanguageCode indicates a language. It is a string of 2-3 characters. chi/zho/zh indicates Chinese and eng/en indicates English. NOTE By default, no configuration is added.Values of LanguageCode are separated by question marks (?).A maximum of 32 LanguageCode values can be configured.A LanguageCode value must match a FriendlyName value.
hwOperatorNameProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.48.1		not-accessible	The index of this table is hwOperatorNameProfileName.
hwOperatorNameProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.42			Description.
OCT hwOperatorNameProfileName	1.3.6.1.4.1.2011.6.139.11.1.48.1.1	OCTET STRING	not-accessible	This object indicates the name of an operator name profile. It is the index of the table.
ROW hwOperatorNameProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.48.1.4	RowStatus	read-write	This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
hwOperatorNameProfileTable	1.3.6.1.4.1.2011.6.139.11.1.48		not-accessible	This table is used to configure and query operator name profile parameters.
INT hwRadio2GProfileAmsduSwitch	1.3.6.1.4.1.2011.6.139.11.1.16.1.74	INTEGER	read-write	This object indicates the status of a-msdu switch. The default value is 1.
hwRegulatoryDomainProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.11.1		not-accessible	The index of this table is hwRegulatoryDomainProfileName.
hwRegulatoryDomainProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.11			Description.
OCT hwRegulatoryDomainProfileName	1.3.6.1.4.1.2011.6.139.11.1.11.1.1	OCTET STRING	not-accessible	This object indicates the name of a regulatory domain profile. It is the index of the table.
hwRegulatoryDomainProfileTable	1.3.6.1.4.1.2011.6.139.11.1.11		not-accessible	This table is used to configure country codes, calibration channels, and calibration channel bandwidths.
ROW hwRegulatoryDomainProfilRowStatus	1.3.6.1.4.1.2011.6.139.11.1.11.1.6	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.
OCT hwRoamingConsortiumOIInBeaconList	1.3.6.1.4.1.2011.6.139.11.1.53.1.3	OCTET STRING	read-write	This object indicates whether a roaming consortium member carries the inbeacon tag, for example, YES?NO?NO. NOTE By default, no configuration is added.A RoamingConsortiumOI value must match an OIInBeacon value.A maximum of three RoamingConsortiumOI values can be configured.in-beacon can be set to YES.
OCT hwRoamingConsortiumOIList	1.3.6.1.4.1.2011.6.139.11.1.53.1.2	OCTET STRING	read-write	This object indicates the roaming consortium member. The roaming consortium OI is a hexadecimal number in the format of HH-HH-HH or HH-HH-HH-HH-HH. The length of a roaming consortium OI is three to five bytes, for example, 12-34-56?12-34-58?34-45-67. NOTE By default, no configuration is added.RoamingConsortiumOI values are separated by question marks (?).A maximum of 32 RoamingConsortiumOI values can be configured.A RoamingConsortiumOI value must match an OIInBeacon value.
hwRoamingConsortiumProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.53.1		not-accessible	The index of this table is hwRoamingConsortiumProfileName.
hwRoamingConsortiumProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.47			Description.
OCT hwRoamingConsortiumProfileName	1.3.6.1.4.1.2011.6.139.11.1.53.1.1	OCTET STRING	not-accessible	This object indicates the name of a roaming consortium profile. It is the index of the table.
ROW hwRoamingConsortiumProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.53.1.4	RowStatus	read-write	This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
hwRoamingConsortiumProfileTable	1.3.6.1.4.1.2011.6.139.11.1.53		not-accessible	This table is used to configure and query roaming consortium profile parameters.
INT hwRrmAirtimeFairSchduleSwitch	1.3.6.1.4.1.2011.6.139.11.1.18.1.5	INTEGER	read-write	This object indicates the status of the airtime scheduling function. The default value is 1.
INT hwRrmAutoChannelSelectSwitch	1.3.6.1.4.1.2011.6.139.11.1.18.1.2	INTEGER	read-write	This object indicates the status of the automatic channel selection function. The default value is 2.
INT hwRrmAutoTxPowerSelectSwitch	1.3.6.1.4.1.2011.6.139.11.1.18.1.3	INTEGER	read-write	This object indicates the status of the automatic power selection function. The default value is 2.
U32 hwRrmBandSteerClientBandsExpire	1.3.6.1.4.1.2011.6.139.11.1.18.1.17	Unsigned32	read-write	This object indicates the expiration condition for records of terminal supported bands. If the AP continuously receives probe messages from a terminal on the same band and the number of received probe messages exceeds the specified threshold, the records of terminal supported bands will be updated and the AP will consider that the terminal supports only this band. The default value is 35.
U32 hwRrmBandSteerDenyThreshold	1.3.6.1.4.1.2011.6.139.11.1.18.1.14	Unsigned32	read-write	This object indicates the maximum number of times the band steering function rejects association requests from terminals. The default value is 0.
U32 hwRrmBandSteerLbClientThreshold	1.3.6.1.4.1.2011.6.139.11.1.18.1.15	Unsigned32	read-write	This object indicates the minimum number of terminals for triggering inter-band load balancing. The default value is 100.
U32 hwRrmBandSteerLbGapThreshold	1.3.6.1.4.1.2011.6.139.11.1.18.1.16	Unsigned32	read-write	This object indicates the percentage threshold for access STAs on the 5 GHz radio. The default value is 90.
I32 hwRrmBandSteerSNRThreshold	1.3.6.1.4.1.2011.6.139.11.1.18.1.35	Integer32	read-write	This object indicates the start SNR threshold for triggering 5G-prior access. The default value is 20, in dB.
INT hwRrmBssColorSwitch	1.3.6.1.4.1.2011.6.139.11.1.18.1.81	INTEGER	read-write	This object indicates the status of the bss color function. The default value is 2.
U32 hwRrmCalibrate5gMaxTxPwr	1.3.6.1.4.1.2011.6.139.11.1.18.1.76	Unsigned32	read-write	Calibrate 5g maximum TX power.
U32 hwRrmCalibrate5gMinTxPwr	1.3.6.1.4.1.2011.6.139.11.1.18.1.77	Unsigned32	read-write	Calibrate 5g minimum TX power.
I32 hwRrmCalibrateCoverageThr	1.3.6.1.4.1.2011.6.139.11.1.18.1.39	Integer32	read-write	Calibrate TPC coverage threshold.
U32 hwRrmCalibrateMaxTxPwr	1.3.6.1.4.1.2011.6.139.11.1.18.1.40	Unsigned32	read-write	Calibrate maximum TX power.
U32 hwRrmCalibrateMinTxPwr	1.3.6.1.4.1.2011.6.139.11.1.18.1.41	Unsigned32	read-write	Calibrate minimum TX power.
I32 hwRrmCalibrateNoiseFloorThr	1.3.6.1.4.1.2011.6.139.11.1.18.1.42	Integer32	read-write	Calibrate nose-floor threshold.
I32 hwRrmDFSRecoverDelayTime	1.3.6.1.4.1.2011.6.139.11.1.18.1.44	Integer32	read-write	This object indicates the delay in switching back the DFS channel.
INT hwRrmDFSSmartSelectionSwitch	1.3.6.1.4.1.2011.6.139.11.1.18.1.43	INTEGER	read-write	This object indicates whether DFS smart selection is enabled. By default, this function is enabled.
INT hwRrmDynamicEdcaSwitch	1.3.6.1.4.1.2011.6.139.11.1.18.1.6	INTEGER	read-write	This object indicates the status of the dynamic EDCA parameter adjustment function. The default value is 1.
U32 hwRrmDynamicEdcaThresholdBE	1.3.6.1.4.1.2011.6.139.11.1.18.1.75	Unsigned32	read-write	This object indicates the restrict threshold of edca.
I32 hwRrmErrRateCheckInterval	1.3.6.1.4.1.2011.6.139.11.1.18.1.48	Integer32	read-write	Description.
I32 hwRrmErrRateCheckTrafficThreshold	1.3.6.1.4.1.2011.6.139.11.1.18.1.49	Integer32	read-write	Description.
U32 hwRrmErrRateThreshold	1.3.6.1.4.1.2011.6.139.11.1.18.1.4	Unsigned32	read-write	This object indicate the error packet threshold triggering the automatic channel or power selection function. The default value is 60. It is expressed in percentage.
INT hwRrmHighDensityAmcOptimizeSwitch	1.3.6.1.4.1.2011.6.139.11.1.18.1.60	INTEGER	read-write	This object indicates high density AMC optimize switch.
INT hwRrmInterferenceImmuneSwitch	1.3.6.1.4.1.2011.6.139.11.1.18.1.80	INTEGER	read-write	This object indicates the status of the interference immune function. The default value is 2.
U32 hwRrmLbBtmFailTime	1.3.6.1.4.1.2011.6.139.11.1.18.1.68	Unsigned32	read-write	This object indicates the number of attempts to steer STAs in BTM mode. The default value is 5.
U32 hwRrmLbDeauthFailTime	1.3.6.1.4.1.2011.6.139.11.1.18.1.67	Unsigned32	read-write	This object indicates the number of attempts to steer STAs in Deauthentication mode. The default value is 0.
U32 hwRrmLbProbeReportInterval	1.3.6.1.4.1.2011.6.139.11.1.18.1.66	Unsigned32	read-write	This object indicates the interval for reporting Probe frames. The default value is 120, in seconds.
U32 hwRrmLbRssiDiffGap	1.3.6.1.4.1.2011.6.139.11.1.18.1.72	Unsigned32	read-write	This object indicates the threshold of the RSSI gap between the associated radio and target radio. The default value is 5, in dB..
U32 hwRrmLbSteerAuthRestrictThreshold	1.3.6.1.4.1.2011.6.139.11.1.18.1.71	Unsigned32	read-write	This object indicates the number of times non-target APs suppress STA Probe frames during STA steering. The default value is 0.
U32 hwRrmLbSteerProbeRestrictThreshold	1.3.6.1.4.1.2011.6.139.11.1.18.1.70	Unsigned32	read-write	This object indicates the number of times non-target APs suppress STA Probe frames during STA steering. The default value is 5.
U32 hwRrmLbSteerRestrictTime	1.3.6.1.4.1.2011.6.139.11.1.18.1.69	Unsigned32	read-write	This object indicates the time for suppressing STA association with non-target APs during STA steering. The default value is 5, in seconds.
INT hwRrmLinkMeasurementSwitch	1.3.6.1.4.1.2011.6.139.11.1.18.1.79	INTEGER	read-write	This object indicates the status of the link measurement function. The default value is 2.
U32 hwRrmLoadBalanceChUtilGapThreshold	1.3.6.1.4.1.2011.6.139.11.1.18.1.37	Unsigned32	read-write	This object indicates the load difference threshold of a static load balancing group in channel-utilization mode.
U32 hwRrmLoadBalanceChUtilStartThreshold	1.3.6.1.4.1.2011.6.139.11.1.18.1.38	Unsigned32	read-write	This object indicates the start threshold for load balancing in a static load balancing group in channel-utilization mode.
U32 hwRrmLoadBalanceClientThreshold	1.3.6.1.4.1.2011.6.139.11.1.18.1.19	Unsigned32	read-write	This object indicates the percentage of terminals for triggering load balancing. The default value is 10. It is expressed in percentage.
U32 hwRrmLoadBalanceDenyThreshold	1.3.6.1.4.1.2011.6.139.11.1.18.1.21	Unsigned32	read-write	This object indicates the maximum number of times the load balancing function rejects association requests from terminals. The default value is 3.
I32 hwRrmLoadBalanceGapStaNumThreshold	1.3.6.1.4.1.2011.6.139.11.1.18.1.65	Integer32	read-write	This object indicates the load difference threshold for triggering dynamic load balancing based on the number of STAs. The value 0 indicates that load balancing is based on the percentage of STAs.
U32 hwRrmLoadBalanceGapThreshold	1.3.6.1.4.1.2011.6.139.11.1.18.1.20	Unsigned32	read-write	This object indicates the load difference threshold for triggering load balancing, which is expressed in the number of terminals. The default value is 10.
INT hwRrmLoadBalanceMode	1.3.6.1.4.1.2011.6.139.11.1.18.1.36	INTEGER	read-write	This object indicates the mode for load balancing in a static load balancing group.
I32 hwRrmLoadBalanceRssiThreshold	1.3.6.1.4.1.2011.6.139.11.1.18.1.50	Integer32	read-write	This object indicates the load balance rssi threshold.
INT hwRrmLoadBalanceSwitch	1.3.6.1.4.1.2011.6.139.11.1.18.1.18	INTEGER	read-write	This object indicates the status of the load balancing group function. The default value is 2.
INT hwRrmMultimediaAirOptimize	1.3.6.1.4.1.2011.6.139.11.1.18.1.59	INTEGER	read-write	This object indicates multimedia optimized edca.
U32 hwRrmMultimediaOptimizedThresholdVideo	1.3.6.1.4.1.2011.6.139.11.1.18.1.62	Unsigned32	read-write	This object indicates multimedia optimized edca adaptive video threshold.
U32 hwRrmMultimediaOptimizedThresholdVoice	1.3.6.1.4.1.2011.6.139.11.1.18.1.61	Unsigned32	read-write	This object indicates multimedia optimized edca adaptive voice threshold.
hwRrmProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.18.1		not-accessible	The index of this table is hwRrmProfileName.
hwRrmProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.17			Description.
OCT hwRrmProfileName	1.3.6.1.4.1.2011.6.139.11.1.18.1.1	OCTET STRING	not-accessible	This object indicates the name of the RRM profile. It is the index of the table.
ROW hwRrmProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.18.1.30	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
hwRrmProfileTable	1.3.6.1.4.1.2011.6.139.11.1.18		not-accessible	This table is used to configure radio resource management parameters, including parameters related to band steering, dynamic load balancing, smart roaming, and UAC.
INT hwRrmSmartRoamAdvancedScan	1.3.6.1.4.1.2011.6.139.11.1.18.1.73	INTEGER	read-write	This object indicates the switch of advanced scan.
INT hwRrmSmartRoamCheckType	1.3.6.1.4.1.2011.6.139.11.1.18.1.22	INTEGER	read-write	This object indicates whether STA active roaming is triggered by rate check or SNR check.The values are as follows:? 1: checkSnr? 2: checkRate? 3: checkAll.
U32 hwRrmSmartRoamQuickKickoffBackOffTime	1.3.6.1.4.1.2011.6.139.11.1.18.1.74	Unsigned32	read-write	This object indicates the back-off time of kick off.
INT hwRrmSmartRoamQuickKickoffCheckType	1.3.6.1.4.1.2011.6.139.11.1.18.1.64	INTEGER	read-write	This object indicates the check mode for determining whether to quickly disconnect STAs. The default value is 1.
U32 hwRrmSmartRoamQuickKickoffRateThr	1.3.6.1.4.1.2011.6.139.11.1.18.1.33	Unsigned32	read-write	Smart roam quick-kickoff rate threshold
I32 hwRrmSmartRoamQuickKickoffSNRCheckInterval	1.3.6.1.4.1.2011.6.139.11.1.18.1.45	Integer32	read-write	This object indicates the interval for checking the SNR to determine whether to quickly disconnect STAs. The default value is 500, in milliseconds.
I32 hwRrmSmartRoamQuickKickoffSNRPNObserveTime	1.3.6.1.4.1.2011.6.139.11.1.18.1.46	Integer32	read-write	Description.
I32 hwRrmSmartRoamQuickKickoffSNRPNQualifyTime	1.3.6.1.4.1.2011.6.139.11.1.18.1.47	Integer32	read-write	Description.
U32 hwRrmSmartRoamQuickKickoffSnrThr	1.3.6.1.4.1.2011.6.139.11.1.18.1.34	Unsigned32	read-write	Smart roam quick-kickoff SNR threshold
INT hwRrmSmartRoamQuickKickoffSwitch	1.3.6.1.4.1.2011.6.139.11.1.18.1.63	INTEGER	read-write	This object the status of the smart roam quick-kickoff function. The default value is 2 except the Fat AP.
U32 hwRrmSmartRoamRateThreshold	1.3.6.1.4.1.2011.6.139.11.1.18.1.25	Unsigned32	read-write	This object indicates the rate threshold for triggering the smart roaming function. It is expressed in the percentage against the maximum rate supported by the terminal. The default value is 0. It is expressed in percentage.
U32 hwRrmSmartRoamSnrCheckInterval	1.3.6.1.4.1.2011.6.139.11.1.18.1.28	Unsigned32	read-write	This object indicates the terminal SNR detection interval for smart roaming. The default value is 3. It is expressed in s.
U32 hwRrmSmartRoamSnrHighLevelMargin	1.3.6.1.4.1.2011.6.139.11.1.18.1.26	Unsigned32	read-write	This object indicates the upper SNR difference threshold for triggering smart roaming. The default value is 15. It is expressed in dB.
U32 hwRrmSmartRoamSnrLowLevelMargin	1.3.6.1.4.1.2011.6.139.11.1.18.1.27	Unsigned32	read-write	This object indicates the lower SNR difference threshold for triggering smart roaming. The default value is 6. It is expressed in dB.
U32 hwRrmSmartRoamSnrThreshold	1.3.6.1.4.1.2011.6.139.11.1.18.1.24	Unsigned32	read-write	This object indicates the SNR threshold for triggering the smart roaming function. The default value is 20 dB.
INT hwRrmSmartRoamSwitch	1.3.6.1.4.1.2011.6.139.11.1.18.1.23	INTEGER	read-write	This object indicates the status of the smart roaming function. The default value is 2.
U32 hwRrmSmartRoamUnableRoamExpireTime	1.3.6.1.4.1.2011.6.139.11.1.18.1.29	Unsigned32	read-write	This object indicates the aging time of records that terminals are unable to roam. The default value is 120. It is expressed in minutes.
INT hwRrmSpatialReuseSwitch	1.3.6.1.4.1.2011.6.139.11.1.18.1.82	INTEGER	read-write	This object indicates the status of the spatial reuse function. The default value is 2.
INT hwRrmTpcRequestSwitch	1.3.6.1.4.1.2011.6.139.11.1.18.1.78	INTEGER	read-write	This object indicates the status of the tpc request function. The default value is 1.
U32 hwRrmUacChannelUtiAccessThreshold	1.3.6.1.4.1.2011.6.139.11.1.18.1.31	Unsigned32	read-write	This object indicates the user CAC access threshold based on the channel utilization. If the channel utilization reaches the threshold after a new user goes online, the AP will reject access requests of other new users.The default value is 80, in percentage.
U32 hwRrmUacChannelUtiRoamThreshold	1.3.6.1.4.1.2011.6.139.11.1.18.1.32	Unsigned32	read-write	This object indicates the user CAC roaming threshold based on the channel utilization. When a user roams to an AP, the AP checks whether the current channel utilization reaches the roaming threshold. If so, the AP denies access of the user.The default value is 80, in percentage.
U32 hwRrmUacClientNumAccessThreshold	1.3.6.1.4.1.2011.6.139.11.1.18.1.11	Unsigned32	read-write	This object indicates the user CAC access threshold based on the number of users. If the number of online users reaches the threshold after a new user goes online, the AP will reject access requests of other new users. The default value is 64.
U32 hwRrmUacClientNumRoamThreshold	1.3.6.1.4.1.2011.6.139.11.1.18.1.12	Unsigned32	read-write	This object indicates the user CAC roaming threshold based on the number of users. When a user roams to an AP, the AP checks whether the current number of online users reaches the roaming threshold. If so, the AP denies access of the user.The default value is 64.
U32 hwRrmUacClientSnrThreshold	1.3.6.1.4.1.2011.6.139.11.1.18.1.8	Unsigned32	read-write	This object indicates the SNR threshold for rejecting access from terminals. The default value is 15(from V2R8C10; The default value is 20 before V2R8C10.). The value ranges from 5 to 25 from V200R010C00 and 5 to 75 before V200R010C00. It is expressed in dB.
INT hwRrmUacLimitClientSnrSwitch	1.3.6.1.4.1.2011.6.139.11.1.18.1.7	INTEGER	read-write	This object indicates the status of the rejecting access from terminals with weak signals function. The default value is 1.
INT hwRrmUacPolicySwitch	1.3.6.1.4.1.2011.6.139.11.1.18.1.9	INTEGER	read-write	This object indicates the status of the UAC policy function. The default value is 1.
INT hwRrmUacPolicyType	1.3.6.1.4.1.2011.6.139.11.1.18.1.10	INTEGER	read-write	This object indicates the UAC policy. The default value is 1.
INT hwRrmUacReachThresholdHideSsidSwitch	1.3.6.1.4.1.2011.6.139.11.1.18.1.13	INTEGER	read-write	This object indicates the disposal method when the value of UAC reaches the specified threshold. The default value is 1.
hwSACProfActionGroups	1.3.6.1.4.1.2011.6.139.11.2.2.49			Description.
U32 hwSACProfileActCarCir	1.3.6.1.4.1.2011.6.139.11.1.55.1.6	Unsigned32	read-write	This object indicates the CAR CIR value.
hwSACProfileActionEntry	1.3.6.1.4.1.2011.6.139.11.1.55.1		not-accessible	Indexes of this table are hwSACProfileName and hwSACProfileActionIndex.
U32 hwSACProfileActionIndex	1.3.6.1.4.1.2011.6.139.11.1.55.1.1	Unsigned32	not-accessible	This object indicates the internal index of the action. It is the index of the table.
ROW hwSACProfileActionRowstatus	1.3.6.1.4.1.2011.6.139.11.1.55.1.9	RowStatus	read-write	This object indicates the row status.
hwSACProfileActionTable	1.3.6.1.4.1.2011.6.139.11.1.55		not-accessible	This table describes SAC profile action configurations.This table is used to configure actions in an SAC profile.
INT hwSACProfileActionType	1.3.6.1.4.1.2011.6.139.11.1.55.1.5	INTEGER	read-create	This object indicates the action type.
OCT hwSACProfileActProtocolGrpName	1.3.6.1.4.1.2011.6.139.11.1.55.1.4	OCTET STRING	read-write	This object indicates the protocol group name.
OCT hwSACProfileActProtocolName	1.3.6.1.4.1.2011.6.139.11.1.55.1.3	OCTET STRING	read-write	This object indicates the protocol name.
INT hwSACProfileActProtocolType	1.3.6.1.4.1.2011.6.139.11.1.55.1.2	INTEGER	read-write	This object indicates the protocol type.
U32 hwSACProfileActRemark8021pValue	1.3.6.1.4.1.2011.6.139.11.1.55.1.8	Unsigned32	read-write	This object indicates the 802.1p priority.
U32 hwSACProfileActRemarkDscpValue	1.3.6.1.4.1.2011.6.139.11.1.55.1.7	Unsigned32	read-write	This object indicates the DSCP value.
hwSACProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.54.1		not-accessible	The index of this table is hwSACProfileName.
hwSACProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.48			Description.
OCT hwSACProfileName	1.3.6.1.4.1.2011.6.139.11.1.54.1.1	OCTET STRING	not-accessible	This object indicates the name of an SAC profile. It is the index of the table.
hwSACProfileTable	1.3.6.1.4.1.2011.6.139.11.1.54		not-accessible	This table is used to configure and query SAC profile parameters.
ROW hwSACProfRowStatus	1.3.6.1.4.1.2011.6.139.11.1.54.1.4	RowStatus	read-write	This object indicates the row status.
INT hwSACProfUserStat	1.3.6.1.4.1.2011.6.139.11.1.54.1.2	INTEGER	read-write	This object indicates whether the user statistics function is enabled in the SAC profile. The default value is disable (1).
INT hwSACProfVapStat	1.3.6.1.4.1.2011.6.139.11.1.54.1.3	INTEGER	read-write	This object indicates whether the VAP statistics function is enabled in the SAC profile. The default value is disable (1).
U32 hwSecurityPMF	1.3.6.1.4.1.2011.6.139.11.1.22.1.38	Unsigned32	read-write	This object indicates the status of the PMF function. The default value is 1.
INT hwSecurityPolicy	1.3.6.1.4.1.2011.6.139.11.1.22.1.2	INTEGER	read-write	This object indicates the air interface authentication policy. The default value is 8(open).
hwSecurityProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.22.1		not-accessible	The index of this table is hwSecurityProfileName.
hwSecurityProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.21			Description.
OCT hwSecurityProfileName	1.3.6.1.4.1.2011.6.139.11.1.22.1.1	OCTET STRING	not-accessible	This object indicates the name of a security profile. It is the index of the table.
ROW hwSecurityProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.22.1.39	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
hwSecurityProfileTable	1.3.6.1.4.1.2011.6.139.11.1.22		not-accessible	This table is used to describe the information of a security profile.
OCT hwSecurityWapiAcCertFileName	1.3.6.1.4.1.2011.6.139.11.1.22.1.20	OCTET STRING	read-write	This object indicate the certificate file name of the WAPI AC.
OCT hwSecurityWapiAcPfxPassword	1.3.6.1.4.1.2011.6.139.11.1.22.1.24	OCTET STRING	read-write	This object indicates the WAPI AC certificate key.
OCT hwSecurityWapiAcPrvKeyFileName	1.3.6.1.4.1.2011.6.139.11.1.22.1.21	OCTET STRING	read-write	This object indicates the private key file name of the WAPI AC.
OCT hwSecurityWapiAcPrvKeyPassword	1.3.6.1.4.1.2011.6.139.11.1.22.1.25	OCTET STRING	read-write	This object indicates the key for reading the AC private key file.
OCT hwSecurityWapiAsuCertFileName	1.3.6.1.4.1.2011.6.139.11.1.22.1.19	OCTET STRING	read-write	This object indicate the certificate file name of the WAPI ASU.
IP hwSecurityWapiAsuIpAddress	1.3.6.1.4.1.2011.6.139.11.1.22.1.17	IpAddress	read-write	This object indicates the IP address of the WAPI ASU.
OCT hwSecurityWapiAsuPfxPassword	1.3.6.1.4.1.2011.6.139.11.1.22.1.23	OCTET STRING	read-write	This object indicates the WAPI ASU certificate key.
U32 hwSecurityWapiBkLifetime	1.3.6.1.4.1.2011.6.139.11.1.22.1.28	Unsigned32	read-write	This object indicates the interval for updating the WAPI BK. The default value is 43200 seconds.
U32 hwSecurityWapiBkThreshold	1.3.6.1.4.1.2011.6.139.11.1.22.1.27	Unsigned32	read-write	This object indicates the WAPI BK lifetime percentage. The default value is 70.
U32 hwSecurityWapiCertRetransCount	1.3.6.1.4.1.2011.6.139.11.1.22.1.26	Unsigned32	read-write	This object indicates the number of retransmissions of WAPI certificate authentication packets. The default value is 3.
OCT hwSecurityWapiIssuerCertFileName	1.3.6.1.4.1.2011.6.139.11.1.22.1.18	OCTET STRING	read-write	This object indicates the certificate file name of the WAPI issuer.
OCT hwSecurityWapiIssuerPfxPassword	1.3.6.1.4.1.2011.6.139.11.1.22.1.22	OCTET STRING	read-write	This object indicates the WAPI issuer certificate key.
U32 hwSecurityWapiMskRetansCount	1.3.6.1.4.1.2011.6.139.11.1.22.1.36	Unsigned32	read-write	This object indicates the maximum number of retransmissions of a WAPI MSK negotiation packet. The default value is 3.
U32 hwSecurityWapiMskUpdateInterval	1.3.6.1.4.1.2011.6.139.11.1.22.1.34	Unsigned32	read-write	This object indicates the time-based interval for updating the WAPI MSK. The default value is 86400 seconds.
INT hwSecurityWapiMskUpdateMethod	1.3.6.1.4.1.2011.6.139.11.1.22.1.30	INTEGER	read-write	This object indicates the WAPI MSK update mode. The default value is 2.
U32 hwSecurityWapiMskUpdatePackets	1.3.6.1.4.1.2011.6.139.11.1.22.1.35	Unsigned32	read-write	This object indicates the number of packets that will trigger WAPI MSK update. The default value is 10.
OCT hwSecurityWapiPsk	1.3.6.1.4.1.2011.6.139.11.1.22.1.16	OCTET STRING	read-write	This object indicates the WAPI PSK.
INT hwSecurityWapiPskMode	1.3.6.1.4.1.2011.6.139.11.1.22.1.15	INTEGER	read-write	This object indicates the WAPI PSK mode. The default value is 1. 1:pskPassphase 2:pskHex.
U32 hwSecurityWapiSATimeout	1.3.6.1.4.1.2011.6.139.11.1.22.1.37	Unsigned32	read-write	This object indicates the timeout period of a WAPI-based security association (SA). The default value is 60 seconds.
U32 hwSecurityWapiUskRetansCount	1.3.6.1.4.1.2011.6.139.11.1.22.1.33	Unsigned32	read-write	This object indicates the maximum number of retransmissions of a WAPI USK negotiation packet. The default value is 3.
U32 hwSecurityWapiUskUpdateInterval	1.3.6.1.4.1.2011.6.139.11.1.22.1.31	Unsigned32	read-write	This object indicates the time-based interval for updating the WAPI USK. The default value is 86400 seconds.
INT hwSecurityWapiUskUpdateMethod	1.3.6.1.4.1.2011.6.139.11.1.22.1.29	INTEGER	read-write	This object indicates the WAPI USK update mode. The default value is 2.
U32 hwSecurityWapiUskUpdatePackets	1.3.6.1.4.1.2011.6.139.11.1.22.1.32	Unsigned32	read-write	This object indicates the number of packets that will trigger WAPI USK update. The default value is 10.
U32 hwSecurityWepDefaultKeyId	1.3.6.1.4.1.2011.6.139.11.1.22.1.9	Unsigned32	read-write	This object indicates the default key ID for WEP. The default value is 1.
U32 hwSecurityWepDot1xMode	1.3.6.1.4.1.2011.6.139.11.1.22.1.40	Unsigned32	read-write	This object indicates that the WEP DOT1X key mode is wep40, wep104 or wep128. bit0~bit3:key0;bit4~bit7:key1;bit8~bit11:key2;bit12~bit16:key3.0:invalid;1:wep40;2:wep104;3:wep128.
U32 hwSecurityWepEncrypt	1.3.6.1.4.1.2011.6.139.11.1.22.1.3	Unsigned32	read-write	This object indicates the WEP encryption algorithm. The default value is 4369.
OCT hwSecurityWepPsk1	1.3.6.1.4.1.2011.6.139.11.1.22.1.5	OCTET STRING	read-write	This object indicates the WEP PSK1.
OCT hwSecurityWepPsk2	1.3.6.1.4.1.2011.6.139.11.1.22.1.6	OCTET STRING	read-write	This object indicates the WEP PSK2.
OCT hwSecurityWepPsk3	1.3.6.1.4.1.2011.6.139.11.1.22.1.7	OCTET STRING	read-write	This object indicates the WEP PSK3.
OCT hwSecurityWepPsk4	1.3.6.1.4.1.2011.6.139.11.1.22.1.8	OCTET STRING	read-write	This object indicates the WEP PSK4.
U32 hwSecurityWepPskMode	1.3.6.1.4.1.2011.6.139.11.1.22.1.4	Unsigned32	read-write	This object indicates that the WEP PSK mode is PassPhase or Hex. The default value is 4369.
INT hwSecurityWpaEncrypt	1.3.6.1.4.1.2011.6.139.11.1.22.1.10	INTEGER	read-write	This object indicates the WPA/WPA2/WPA3 encryption algorithm.
OCT hwSecurityWpaPsk	1.3.6.1.4.1.2011.6.139.11.1.22.1.12	OCTET STRING	read-write	This object indicates the WPA/WPA2 PSK.
INT hwSecurityWpaPskMode	1.3.6.1.4.1.2011.6.139.11.1.22.1.11	INTEGER	read-write	This object indicates whether the WPA PSK mode is PassPhase or Hex.
U32 hwSecurityWpaPtkUpdateInterval	1.3.6.1.4.1.2011.6.139.11.1.22.1.14	Unsigned32	read-write	This object indicates the WPA PTK update interval. The default value is 43200 seconds.
INT hwSecurityWpaPtkUpdateSwitch	1.3.6.1.4.1.2011.6.139.11.1.22.1.13	INTEGER	read-write	This object indicates the status of WPA PTK update function. The default value is 1.
I32 hwSfnRoamCheckBetterSnrTimes	1.3.6.1.4.1.2011.6.139.11.1.18.1.56	Integer32	read-write	This object indicates sfn roam check Better Snr Times.
I32 hwSfnRoamCheckGapRssiThreshold	1.3.6.1.4.1.2011.6.139.11.1.18.1.55	Integer32	read-write	This object indicates sfn roam check gap rssi Threshold.
I32 hwSfnRoamCheckHighThreshold	1.3.6.1.4.1.2011.6.139.11.1.18.1.51	Integer32	read-write	This object indicates sfn roam check high-threshold .
I32 hwSfnRoamCheckInterval	1.3.6.1.4.1.2011.6.139.11.1.18.1.57	Integer32	read-write	This object indicates sfn roam check Decision Interval .
I32 hwSfnRoamCheckLowThreshold	1.3.6.1.4.1.2011.6.139.11.1.18.1.52	Integer32	read-write	This object indicates sfn roam check low-threshold .
I32 hwSfnRoamCheckRssiAccumulateThreshold	1.3.6.1.4.1.2011.6.139.11.1.18.1.53	Integer32	read-write	This object indicates sfn roam check cumulative RSSI change threshold .
I32 hwSfnRoamCheckStaHoldingTimes	1.3.6.1.4.1.2011.6.139.11.1.18.1.54	Integer32	read-write	This object indicates sfn roam check Sta HoldingTimes .
I32 hwSfnRoamReportInterval	1.3.6.1.4.1.2011.6.139.11.1.18.1.58	Integer32	read-write	This object indicates sfn roam check Snr Report Interval
IP hwSoftgreDestinationIPAddress	1.3.6.1.4.1.2011.6.139.11.1.68.1.2	IpAddress	read-write	Description.
OCT hwSoftgreDestinationIPv6Address	1.3.6.1.4.1.2011.6.139.11.1.68.1.3	OCTET STRING	read-write	Description.
INT hwSoftgreKeepaliveFlag	1.3.6.1.4.1.2011.6.139.11.1.68.1.4	INTEGER	read-write	Description.
U32 hwSoftgreKeepalivePeriod	1.3.6.1.4.1.2011.6.139.11.1.68.1.5	Unsigned32	read-write	Description.
U32 hwSoftgreKeepaliveRetryTimes	1.3.6.1.4.1.2011.6.139.11.1.68.1.6	Unsigned32	read-write	Description.
OCT hwSoftgreProfile	1.3.6.1.4.1.2011.6.139.11.1.20.1.34	OCTET STRING	read-write	The object indicates the Softgre profile that is bound to the VAP.
hwSoftgreProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.68.1		not-accessible	Description.
hwSoftgreProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.61			Description.
OCT hwSoftgreProfileName	1.3.6.1.4.1.2011.6.139.11.1.68.1.1	OCTET STRING	not-accessible	Description.
ROW hwSoftgreProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.68.1.7	RowStatus	read-write	Description.
hwSoftgreProfileTable	1.3.6.1.4.1.2011.6.139.11.1.68		not-accessible	Description.
U32 hwSoftgreUntaggedVlanId	1.3.6.1.4.1.2011.6.139.11.1.68.1.8	Unsigned32	read-write	This object indicates the untagged vlan id of the softgre profile.
INT hwSsidActiveDullClient	1.3.6.1.4.1.2011.6.139.11.1.21.1.39	INTEGER	read-write	Description.
INT hwSsidAdvertiseApNameSwitch	1.3.6.1.4.1.2011.6.139.11.1.21.1.47	INTEGER	read-write	Description.
U32 hwSsidAssocTimeout	1.3.6.1.4.1.2011.6.139.11.1.21.1.4	Unsigned32	read-write	This object indicates the association timeout period of a user. The default value is 5 minutes.
INT hwSsidBeacon2gRate	1.3.6.1.4.1.2011.6.139.11.1.21.1.34	INTEGER	read-write	Description.
INT hwSsidBeacon5gRate	1.3.6.1.4.1.2011.6.139.11.1.21.1.35	INTEGER	read-write	Description.
INT hwSsidBeamformingSwitch	1.3.6.1.4.1.2011.6.139.11.1.21.1.58	INTEGER	read-write	This object indicates the transmit beamforming switch of SSID. The default value is 2.
U32 hwSsidClientEdcaBeAIFSN	1.3.6.1.4.1.2011.6.139.11.1.21.1.18	Unsigned32	read-write	This object indicates the AIFSN value, which determines the idle waiting time. The value of this object is the AIFSN value of the AC_BE queue on the station. The default value is 3. In V200R019C10 and later versions, 1 is not supported and will switch to 2 automatically.
U32 hwSsidClientEdcaBeECWmax	1.3.6.1.4.1.2011.6.139.11.1.21.1.16	Unsigned32	read-write	This object indicates the ECWmax value, which determines the average avoidance time. The value of this object is the ECWmax value of the AC_BE queue on the station. The default value is 10.
U32 hwSsidClientEdcaBeECWmin	1.3.6.1.4.1.2011.6.139.11.1.21.1.17	Unsigned32	read-write	This object indicates the ECWmin value, which determines the average avoidance time. The value of this object is the ECWmin value of the AC_BE queue on the station. The default value is 4.
U32 hwSsidClientEdcaBeTXOPLimit	1.3.6.1.4.1.2011.6.139.11.1.21.1.19	Unsigned32	read-write	This object indicates the TXOPLimit value, which determines the time for occupying the channel. The value of this object is the TXOPLimit value of the AC_BE queue on the station. The default value is 0.
U32 hwSsidClientEdcaBkAIFSN	1.3.6.1.4.1.2011.6.139.11.1.21.1.22	Unsigned32	read-write	This object indicates the AIFSN value, which determines the idle waiting time. The value of this object is the AIFSN value of the AC_BK queue on the station. The default value is 7. In V200R019C10 and later versions, 1 is not supported and will switch to 2 automatically.
U32 hwSsidClientEdcaBkECWmax	1.3.6.1.4.1.2011.6.139.11.1.21.1.20	Unsigned32	read-write	This object indicates the ECWmax value, which determines the average avoidance time. The value of this object is the ECWmax value of the AC_BK queue on the station. The default value is 10.
U32 hwSsidClientEdcaBkECWmin	1.3.6.1.4.1.2011.6.139.11.1.21.1.21	Unsigned32	read-write	This object indicates the ECWmin value, which determines the average avoidance time. The value of this object is the ECWmin value of the AC_BK queue on the station. The default value is 4.
U32 hwSsidClientEdcaBkTXOPLimit	1.3.6.1.4.1.2011.6.139.11.1.21.1.23	Unsigned32	read-write	This object indicates the TXOPLimit value, which determines the time for occupying the channel. The value of this object is the TXOPLimit value of the AC_BK queue on the station. The default value is 0.
U32 hwSsidClientEdcaVideoAIFSN	1.3.6.1.4.1.2011.6.139.11.1.21.1.14	Unsigned32	read-write	This object indicates the AIFSN value, which determines the idle waiting time. The value of this object is the AIFSN value of the AC_VI queue on the station. The default value is 2. In V200R019C10 and later versions, 1 is not supported and will switch to 2 automatically.
U32 hwSsidClientEdcaVideoECWmax	1.3.6.1.4.1.2011.6.139.11.1.21.1.12	Unsigned32	read-write	This object indicates the ECWmax value, which determines the average avoidance time. The value of this object is the ECWmax value of the AC_VI queue on the station. The default value is 4.
U32 hwSsidClientEdcaVideoECWmin	1.3.6.1.4.1.2011.6.139.11.1.21.1.13	Unsigned32	read-write	This object indicates the ECWmin value, which determines the average avoidance time. The value of this object is the ECWmin value of the AC_VI queue on the station. The default value is 3.
U32 hwSsidClientEdcaVideoTXOPLimit	1.3.6.1.4.1.2011.6.139.11.1.21.1.15	Unsigned32	read-write	This object indicates the TXOPLimit value, which determines the time for occupying the channel. The value of this object is the TXOPLimit value of the AC_VI queue on the station. The default value is 94.
U32 hwSsidClientEdcaVoiceAIFSN	1.3.6.1.4.1.2011.6.139.11.1.21.1.10	Unsigned32	read-write	This object indicates the AIFSN value, which determines the idle waiting time. The value of this object is the AIFSN value of the AC_VO queue on the station. The default value is 2. In V200R019C10 and later versions, 1 is not supported and will switch to 2 automatically.
U32 hwSsidClientEdcaVoiceECWmax	1.3.6.1.4.1.2011.6.139.11.1.21.1.8	Unsigned32	read-write	This object indicates the ECWmax value, which determines the average avoidance time. The value of this object is the ECWmax value of the AC_VO queue on the station. The default value is 3.
U32 hwSsidClientEdcaVoiceECWmin	1.3.6.1.4.1.2011.6.139.11.1.21.1.9	Unsigned32	read-write	This object indicates the ECWmin value, which determines the average avoidance time. The value of this object is the ECWmin value of the AC_VO queue on the station. The default value is 2.
U32 hwSsidClientEdcaVoiceTXOPLimit	1.3.6.1.4.1.2011.6.139.11.1.21.1.11	Unsigned32	read-write	This object indicates the TXOPLimit value, which determines the time for occupying the channel. The value of this object is the TXOPLimit value of the AC_VO queue on the station. The default value is 47.
INT hwSsidDenyBroadcastProbe	1.3.6.1.4.1.2011.6.139.11.1.21.1.36	INTEGER	read-write	Description.
U32 hwSsidDtimInterval	1.3.6.1.4.1.2011.6.139.11.1.21.1.7	Unsigned32	read-write	This object indicates the DTIM interval. The default value is 1.
INT hwSsidGameTurboSwitch	1.3.6.1.4.1.2011.6.139.11.1.21.1.64	INTEGER	read-write	This object indicates the game-turbo switch of SSID.
U32 hwSsidHERxMcsMap	1.3.6.1.4.1.2011.6.139.11.1.21.1.57	Unsigned32	read-write	This object indicates the maximum HE RX MCS value.
U32 hwSsidHERxNssCount	1.3.6.1.4.1.2011.6.139.11.1.21.1.55	Unsigned32	read-write	This object indicates the maximum number of HE RX spatial streams.
U32 hwSsidHETxMcsMap	1.3.6.1.4.1.2011.6.139.11.1.21.1.56	Unsigned32	read-write	This object indicates the maximum HE TX MCS value.
U32 hwSsidHETxNssCount	1.3.6.1.4.1.2011.6.139.11.1.21.1.54	Unsigned32	read-write	This object indicates the maximum number of HE TX spatial streams.
INT hwSsidHide	1.3.6.1.4.1.2011.6.139.11.1.21.1.3	INTEGER	read-write	This object indicates whether to enable SSID hiding. The default value is 1.
INT hwSsidHideWhileReachMaxSta	1.3.6.1.4.1.2011.6.139.11.1.21.1.33	INTEGER	read-write	This object indicates the disposal method when the number of stations reaches the specified threshold. The default value is 2.
U32 hwSsidInboundCarCbs	1.3.6.1.4.1.2011.6.139.11.1.21.1.26	Unsigned32	read-write	This object indicates the inbound committed burst size (CBS) of the SSID. The default value is 0 bytes. Invalid value is 1 to 1499.
U32 hwSsidInboundCarCir	1.3.6.1.4.1.2011.6.139.11.1.21.1.24	Unsigned32	read-write	This object indicates the inbound committed information rate (CIR) of the SSID. The default value is 0 kbit/s. Invalid value is 1 to 63.
U32 hwSsidInboundCarPbs	1.3.6.1.4.1.2011.6.139.11.1.21.1.27	Unsigned32	read-write	This object indicates the inbound peak burst size (PBS) of the SSID. The default value is 0 bytes. Invalid value is 1 to 1499.
U32 hwSsidInboundCarPir	1.3.6.1.4.1.2011.6.139.11.1.21.1.25	Unsigned32	read-write	This object indicates the inbound peak information rate (PIR) of the SSID. The default value is 0 kbit/s. Invalid value is 1 to 63.
INT hwSsidInterAcRoamSwitch	1.3.6.1.4.1.2011.6.139.11.1.21.1.49	INTEGER	read-write	This object indicates the inter-ac roam switch of SSID.
INT hwSsidLegacyStaSwitch	1.3.6.1.4.1.2011.6.139.11.1.21.1.6	INTEGER	read-write	This object indicates whether to allow access from legacy terminals. The default value is 2.
U32 hwSsidMaxStaNum	1.3.6.1.4.1.2011.6.139.11.1.21.1.5	Unsigned32	read-write	The object indicates the number of access users on a VAP. The default value is 64.
INT hwSsidMuMIMOOptimizeSwitch	1.3.6.1.4.1.2011.6.139.11.1.21.1.46	INTEGER	read-write	Description.
INT hwSsidMuMIMOSwitch	1.3.6.1.4.1.2011.6.139.11.1.21.1.40	INTEGER	read-write	Description.
U32 hwSsidOutboundCarCbs	1.3.6.1.4.1.2011.6.139.11.1.21.1.30	Unsigned32	read-write	This object indicates the outbound committed burst size (CBS) of the SSID. The default value is 0 bytes. Invalid value is 1 to 1499.
U32 hwSsidOutboundCarCir	1.3.6.1.4.1.2011.6.139.11.1.21.1.28	Unsigned32	read-write	This object indicates the outbound committed information rate (CIR) of the SSID. The default value is 0 kbit/s. Invalid value is 1 to 63.
U32 hwSsidOutboundCarPbs	1.3.6.1.4.1.2011.6.139.11.1.21.1.31	Unsigned32	read-write	This object indicates the outbound peak burst size (PBS) of the SSID. The default value is 0 bytes. Invalid value is 1 to 1499.
U32 hwSsidOutboundCarPir	1.3.6.1.4.1.2011.6.139.11.1.21.1.29	Unsigned32	read-write	This object indicates the outbound peak information rate (PIR) of the SSID. The default value is 0 kbit/s. Invalid value is 1 to 63.
U32 hwSsidProbeResponseRetry	1.3.6.1.4.1.2011.6.139.11.1.21.1.37	Unsigned32	read-write	Description.
INT hwSsidProfile80211rEnable	1.3.6.1.4.1.2011.6.139.11.1.21.1.41	INTEGER	read-write	This object indicates the switch of 802.11r.
INT hwSsidProfile80211rMode	1.3.6.1.4.1.2011.6.139.11.1.21.1.42	INTEGER	read-write	This object indicates the mode of 802.11r.
INT hwSsidProfile80211rPrivateSwitch	1.3.6.1.4.1.2011.6.139.11.1.21.1.63	INTEGER	read-write	This object indicates if 11r private is enabled. The default value is 1.
I32 hwSsidProfile80211rReassociateTimeout	1.3.6.1.4.1.2011.6.139.11.1.21.1.43	Integer32	read-write	This object indicates the reassociate timeout of 802.11r.
hwSsidProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.21.1		not-accessible	The index of this table is hwSsidProfileName.
hwSsidProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.20			Description.
OCT hwSsidProfileName	1.3.6.1.4.1.2011.6.139.11.1.21.1.1	OCTET STRING	not-accessible	This object indicates the name of a SSID profile. It is the index of the table.
INT hwSsidProfileOfdmaDownlinkSwitch	1.3.6.1.4.1.2011.6.139.11.1.21.1.60	INTEGER	read-write	This object indicates whether to enable the OFDMA downlink function. The default value is 2.
INT hwSsidProfileOfdmaUplinkSwitch	1.3.6.1.4.1.2011.6.139.11.1.21.1.61	INTEGER	read-write	This object indicates whether to enable the OFDMA uplink function. The default value is 2.
INT hwSsidProfilePartialMumimoDownlinkSwitch	1.3.6.1.4.1.2011.6.139.11.1.21.1.59	INTEGER	read-write	This object indicates whether to enable the partial-mu-mimo downlink function. The default value is 2.
ROW hwSsidProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.21.1.32	RowStatus	read-write	Description.
hwSsidProfileTable	1.3.6.1.4.1.2011.6.139.11.1.21		not-accessible	This table is used to configure and query SSID profile parameters.
INT hwSsidQbssLoadSwitch	1.3.6.1.4.1.2011.6.139.11.1.21.1.44	INTEGER	read-write	This object indicates the qbss load switch of VAP.
INT hwSsidServiceGuarantee	1.3.6.1.4.1.2011.6.139.11.1.21.1.48	INTEGER	read-write	This object indicates the service guarantee switch of VAP.
INT hwSsidSingleTxchainSwitch	1.3.6.1.4.1.2011.6.139.11.1.21.1.45	INTEGER	read-write	This object indicates the single txchain switch of VAP.
OCT hwSsidText	1.3.6.1.4.1.2011.6.139.11.1.21.1.2	OCTET STRING	read-write	This object indicates the SSID character string. The default value is HUAWEI-WLAN.
INT hwSsidTwtSwitch	1.3.6.1.4.1.2011.6.139.11.1.21.1.62	INTEGER	read-write	This object indicates whether to enable the twt function. The default value is 1.
INT hwSsidUapsd	1.3.6.1.4.1.2011.6.139.11.1.21.1.38	INTEGER	read-write	Description.
U32 hwSsidVhtRxMcsMap	1.3.6.1.4.1.2011.6.139.11.1.21.1.53	Unsigned32	read-write	This object indicates the maximum VHT RX MCS value.
U32 hwSsidVhtRxNssCount	1.3.6.1.4.1.2011.6.139.11.1.21.1.51	Unsigned32	read-write	This object indicates the maximum number of VHT RX spatial streams.
U32 hwSsidVhtTxMcsMap	1.3.6.1.4.1.2011.6.139.11.1.21.1.52	Unsigned32	read-write	This object indicates the maximum VHT TX MCS value.
U32 hwSsidVhtTxNssCount	1.3.6.1.4.1.2011.6.139.11.1.21.1.50	Unsigned32	read-write	This object indicates the maximum number of VHT TX spatial streams.
hwStaBlacklistProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.25			Description.
hwStaWhitelistProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.24			Description.
U32 hwSysWmiApplicationStatisticsDataInterval	1.3.6.1.4.1.2011.6.139.11.1.93.1.18	Unsigned32	read-write	Description.
hwSysWmiConfigEntry	1.3.6.1.4.1.2011.6.139.11.1.93.1		not-accessible	Description.
hwSysWmiConfigTable	1.3.6.1.4.1.2011.6.139.11.1.93		not-accessible	Description.
U32 hwSysWmiCpcarDataInterval	1.3.6.1.4.1.2011.6.139.11.1.93.1.20	Unsigned32	read-write	Description.
U32 hwSysWmiDeviceDataInterval	1.3.6.1.4.1.2011.6.139.11.1.93.1.9	Unsigned32	read-write	Description.
U32 hwSysWmiEmdiDataInterval	1.3.6.1.4.1.2011.6.139.11.1.93.1.19	Unsigned32	read-write	Description.
U32 hwSysWmiIndex	1.3.6.1.4.1.2011.6.139.11.1.93.1.1	Unsigned32	not-accessible	Description.
U32 hwSysWmiInterfaceDataInterval	1.3.6.1.4.1.2011.6.139.11.1.93.1.12	Unsigned32	read-write	Description.
U32 hwSysWmiKeepAliveInterval	1.3.6.1.4.1.2011.6.139.11.1.93.1.5	Unsigned32	read-write	Description.
U32 hwSysWmiLocationDataInterval	1.3.6.1.4.1.2011.6.139.11.1.93.1.15	Unsigned32	read-write	Description.
U32 hwSysWmiLogDataInterval	1.3.6.1.4.1.2011.6.139.11.1.93.1.14	Unsigned32	read-write	Description.
OCT hwSysWmiLogMIDList	1.3.6.1.4.1.2011.6.139.11.1.93.1.22	OCTET STRING	read-write	Description.
U32 hwSysWmiMaxPacketSize	1.3.6.1.4.1.2011.6.139.11.1.93.1.8	Unsigned32	read-write	Description.
U32 hwSysWmiMeshDataInterval	1.3.6.1.4.1.2011.6.139.11.1.93.1.26	Unsigned32	read-write	Description.
U32 hwSysWmiNeighborDataInterval	1.3.6.1.4.1.2011.6.139.11.1.93.1.21	Unsigned32	read-write	Description.
U32 hwSysWmiRadioDataInterval	1.3.6.1.4.1.2011.6.139.11.1.93.1.11	Unsigned32	read-write	Description.
U32 hwSysWmiReportInterval	1.3.6.1.4.1.2011.6.139.11.1.93.1.4	Unsigned32	read-write	Description.
U32 hwSysWmiRetryConnectionCnt	1.3.6.1.4.1.2011.6.139.11.1.93.1.7	Unsigned32	read-write	Description.
U32 hwSysWmiRetryConnectionInterval	1.3.6.1.4.1.2011.6.139.11.1.93.1.6	Unsigned32	read-write	Description.
U32 hwSysWmiRoamDataInterval	1.3.6.1.4.1.2011.6.139.11.1.93.1.17	Unsigned32	read-write	Description.
U32 hwSysWmiSecurityDataInterval	1.3.6.1.4.1.2011.6.139.11.1.93.1.16	Unsigned32	read-write	Description.
IP hwSysWmiServerIPv4	1.3.6.1.4.1.2011.6.139.11.1.93.1.2	IpAddress	read-write	Description.
U32 hwSysWmiServerPort	1.3.6.1.4.1.2011.6.139.11.1.93.1.3	Unsigned32	read-write	Description.
U32 hwSysWmiSsidDataInterval	1.3.6.1.4.1.2011.6.139.11.1.93.1.10	Unsigned32	read-write	Description.
U32 hwSysWmiTerminalDataInterval	1.3.6.1.4.1.2011.6.139.11.1.93.1.13	Unsigned32	read-write	Description.
U32 hwSysWmiTerminalDhcpOptionDataInterval	1.3.6.1.4.1.2011.6.139.11.1.93.1.23	Unsigned32	read-write	Description.
U32 hwSysWmiTerminalHttpUaDataInterval	1.3.6.1.4.1.2011.6.139.11.1.93.1.24	Unsigned32	read-write	Description.
U32 hwSysWmiTerminalMdnsDataInterval	1.3.6.1.4.1.2011.6.139.11.1.93.1.25	Unsigned32	read-write	Description.
I32 hwTestApNormalCollectCycle	1.3.6.1.4.1.2011.6.139.11.1.1.9	Integer32	read-write	This object indicates the regular period of an AC collecting AP performance data.
I32 hwTestApRtCollectCycle	1.3.6.1.4.1.2011.6.139.11.1.1.10	Integer32	read-write	This object indicates the real-time period of an AC collecting AP performance data.
I32 hwTestRtCollectOnoff	1.3.6.1.4.1.2011.6.139.11.1.1.8	Integer32	read-write	This object indicates the status of the real-time collection switch.
I32 hwTrafficProfileTrafficFilterACLNum1	1.3.6.1.4.1.2011.6.139.11.1.86.1.4	Integer32	read-write	This object indicates the ACL rule for packet filtering in a traffic profile.
I32 hwTrafficProfileTrafficFilterACLNum2	1.3.6.1.4.1.2011.6.139.11.1.86.1.5	Integer32	read-write	This object indicates the ACL rule for packet filtering in a traffic profile.
INT hwTrafficProfileTrafficFilterDirection	1.3.6.1.4.1.2011.6.139.11.1.86.1.1	INTEGER	not-accessible	This object indicates the ACL rule direction for packet filtering in a traffic profile. This parameter has no default value.
hwTrafficProfileTrafficFilterEntry	1.3.6.1.4.1.2011.6.139.11.1.86.1		not-accessible	The indexes of this table are hwAPTrafficProfileName, hwTrafficProfileTrafficFilterID and hwTrafficProfileTrafficFilterDirection.
U32 hwTrafficProfileTrafficFilterID	1.3.6.1.4.1.2011.6.139.11.1.86.1.2	Unsigned32	not-accessible	This object indicates the ACL rule ID for packet filtering in a traffic profile. This parameter has no default value.
ROW hwTrafficProfileTrafficFilterRowStatus	1.3.6.1.4.1.2011.6.139.11.1.86.1.6	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
hwTrafficProfileTrafficFilterTable	1.3.6.1.4.1.2011.6.139.11.1.86		not-accessible	This table is used to configure QoS filter information.
INT hwTrafficProfileTrafficFilterTpye	1.3.6.1.4.1.2011.6.139.11.1.86.1.3	INTEGER	read-write	This object indicates the ACL rule type for packet filtering in a traffic profile. This parameter has no default value.
I32 hwTrafficProfileTrafficRemarkACLNum1	1.3.6.1.4.1.2011.6.139.11.1.87.1.4	Integer32	read-write	This object indicates the ACL rule for packet remarking in a traffic profile.
I32 hwTrafficProfileTrafficRemarkACLNum2	1.3.6.1.4.1.2011.6.139.11.1.87.1.5	Integer32	read-write	This object indicates the ACL rule for packet remarking in a traffic profile.
INT hwTrafficProfileTrafficRemarkDirection	1.3.6.1.4.1.2011.6.139.11.1.87.1.1	INTEGER	not-accessible	This object indicates the ACL rule direction for packet remarking in a traffic profile. This parameter has no default value.
hwTrafficProfileTrafficRemarkEntry	1.3.6.1.4.1.2011.6.139.11.1.87.1		not-accessible	The indexes of this table are hwAPTrafficProfileName, hwTrafficProfileTrafficRemarkDirection and hwTrafficProfileTrafficRemarkID.
U32 hwTrafficProfileTrafficRemarkID	1.3.6.1.4.1.2011.6.139.11.1.87.1.2	Unsigned32	not-accessible	This object indicates the ACL rule ID for packet remarking in a traffic profile. This parameter has no default value.
INT hwTrafficProfileTrafficRemarkIPType	1.3.6.1.4.1.2011.6.139.11.1.87.1.3	INTEGER	read-write	This object indicates the ACL rule IP type for packet remarking in a traffic profile. This parameter has no default value.
ROW hwTrafficProfileTrafficRemarkRowStatus	1.3.6.1.4.1.2011.6.139.11.1.87.1.8	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
hwTrafficProfileTrafficRemarkTable	1.3.6.1.4.1.2011.6.139.11.1.87		not-accessible	This table is used to configure QoS remark information.
INT hwTrafficProfileTrafficRemarkType	1.3.6.1.4.1.2011.6.139.11.1.87.1.6	INTEGER	read-write	This object indicates the ACL rule mask type for packet remarking in a traffic profile. This parameter has no default value.
I32 hwTrafficProfileTrafficRemarkValue	1.3.6.1.4.1.2011.6.139.11.1.87.1.7	Integer32	read-write	This object indicates the ACL rule mask value for packet remarking in a traffic profile. This parameter has no default value.
hwUCCProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.67.1		not-accessible	The index of this table is hwUCCProfileName.
hwUccProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.60			Description.
OCT hwUCCProfileName	1.3.6.1.4.1.2011.6.139.11.1.67.1.1	OCTET STRING	not-accessible	This object indicates the name of a UCC profile. It is the index of the table.
ROW hwUCCProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.67.1.18	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
hwUCCProfileTable	1.3.6.1.4.1.2011.6.139.11.1.67		not-accessible	This table is used to configure and query UCC profile parameters.
INT hwUCCProfLyncFileTransfer8021p	1.3.6.1.4.1.2011.6.139.11.1.67.1.14	INTEGER	read-write	This object indicates the switch of lync-file-transfer remark 8021p.
U32 hwUCCProfLyncFileTransfer8021pValue	1.3.6.1.4.1.2011.6.139.11.1.67.1.15	Unsigned32	read-write	This object indicates the value of lync-file-transfer remark 8021p.
INT hwUCCProfLyncFileTransferDscp	1.3.6.1.4.1.2011.6.139.11.1.67.1.16	INTEGER	read-write	This object indicates the switch of lync-file-transfer remark dscp.
U32 hwUCCProfLyncFileTransferDscpValue	1.3.6.1.4.1.2011.6.139.11.1.67.1.17	Unsigned32	read-write	This object indicates the value of lync-file-transfer remark dscp.
INT hwUCCProfLyncShare8021p	1.3.6.1.4.1.2011.6.139.11.1.67.1.10	INTEGER	read-write	This object indicates the switch of lync-destop-share remark 8021p.
U32 hwUCCProfLyncShare8021pValue	1.3.6.1.4.1.2011.6.139.11.1.67.1.11	Unsigned32	read-write	This object indicates the value of lync-destop-share remark 8021p.
INT hwUCCProfLyncShareDscp	1.3.6.1.4.1.2011.6.139.11.1.67.1.12	INTEGER	read-write	This object indicates the switch of lync-destop-share remark dscp.
U32 hwUCCProfLyncShareDscpValue	1.3.6.1.4.1.2011.6.139.11.1.67.1.13	Unsigned32	read-write	This object indicates the value of lync-destop-share remark dscp.
INT hwUCCProfLyncVideo8021p	1.3.6.1.4.1.2011.6.139.11.1.67.1.6	INTEGER	read-write	This object indicates the switch of lync-video remark 8021p.
U32 hwUCCProfLyncVideo8021pValue	1.3.6.1.4.1.2011.6.139.11.1.67.1.7	Unsigned32	read-write	This object indicates the value of lync-video remark 8021p.
INT hwUCCProfLyncVideoDscp	1.3.6.1.4.1.2011.6.139.11.1.67.1.8	INTEGER	read-write	This object indicates the switch of lync-video remark dscp.
U32 hwUCCProfLyncVideoDscpValue	1.3.6.1.4.1.2011.6.139.11.1.67.1.9	Unsigned32	read-write	This object indicates the value of lync-video remark dscp.
INT hwUCCProfLyncVoice8021p	1.3.6.1.4.1.2011.6.139.11.1.67.1.2	INTEGER	read-write	This object indicates the switch of lync-voice remark 8021p.
U32 hwUCCProfLyncVoice8021pValue	1.3.6.1.4.1.2011.6.139.11.1.67.1.3	Unsigned32	read-write	This object indicates the value of lync-voice remark 8021p.
INT hwUCCProfLyncVoiceDscp	1.3.6.1.4.1.2011.6.139.11.1.67.1.4	INTEGER	read-write	This object indicates the switch of lync-voice remark dscp.
U32 hwUCCProfLyncVoiceDscpValue	1.3.6.1.4.1.2011.6.139.11.1.67.1.5	Unsigned32	read-write	This object indicates the value of lync-voice remark dscp.
I32 hwUndoWlanProtectIpAddress	1.3.6.1.4.1.2011.6.139.11.1.1.12.6	Integer32	read-write	This object indicates whether to restore the default setting of the IP address of the standby AC.
I32 hwUndoWlanProtectIPv6Address	1.3.6.1.4.1.2011.6.139.11.1.1.12.8	Integer32	read-write	This object indicates whether to restore the default setting of the IPv6 address of the standby AC.
I32 hwUndoWlanProtectPriority	1.3.6.1.4.1.2011.6.139.11.1.1.12.7	Integer32	read-write	This object indicates whether to restore the default setting of the priority of the standby AC.
INT hwVapAntiAttackARPFloodBlacklistSwitch	1.3.6.1.4.1.2011.6.139.11.1.20.1.47	INTEGER	read-write	This object indicates the status of the VAP anti-attack ARP flood blacklist function. The default value is 1.
U32 hwVapAntiAttackARPFloodStaRateThreshold	1.3.6.1.4.1.2011.6.139.11.1.20.1.46	Unsigned32	read-write	This object indicates the anti-attack ARP flood sta-rate-threshold for the VAP. The default value is 5.
INT hwVapAntiAttackARPFloodSwitch	1.3.6.1.4.1.2011.6.139.11.1.20.1.45	INTEGER	read-write	This object indicates the status of the VAP anti-attack ARP flood function. The default value is 2.
INT hwVapAntiAttackBroadcastFloodBlacklistSwitch	1.3.6.1.4.1.2011.6.139.11.1.20.1.43	INTEGER	read-write	This object indicates the status of the VAP anti-attack braoadcast flood blacklist function. The default value is 1.
U32 hwVapAntiAttackBroadcastFloodStaRateThreshold	1.3.6.1.4.1.2011.6.139.11.1.20.1.42	Unsigned32	read-write	This object indicates the anti-attack braoadcast flood sta-rate-threshold for the VAP. The default value is 10.
INT hwVapAntiAttackBroadcastFloodSwitch	1.3.6.1.4.1.2011.6.139.11.1.20.1.41	INTEGER	read-write	This object indicates the status of the VAP anti-attack braoadcast flood function. The default value is 2.
INT hwVapAntiAttackDefFloodBlacklistSwitch	1.3.6.1.4.1.2011.6.139.11.1.79.1.5	INTEGER	read-write	This object indicates the status of the VAP anti-attack user-defined flood blacklist function.
U32 hwVapAntiAttackDefFloodIndex	1.3.6.1.4.1.2011.6.139.11.1.79.1.1	Unsigned32	not-accessible	This object indicates the internal index of the action. It is the index of the table.
INT hwVapAntiAttackDefFloodProtocolType	1.3.6.1.4.1.2011.6.139.11.1.79.1.2	INTEGER	read-write	This object indicates the protocol type.
U32 hwVapAntiAttackDefFloodProtocolValue	1.3.6.1.4.1.2011.6.139.11.1.79.1.3	Unsigned32	read-write	This object indicates the protocol value.
ROW hwVapAntiAttackDefFloodRowStatus	1.3.6.1.4.1.2011.6.139.11.1.79.1.6	RowStatus	read-write	This object indicates the row status.
U32 hwVapAntiAttackDefFloodStaRateThreshold	1.3.6.1.4.1.2011.6.139.11.1.79.1.4	Unsigned32	read-write	This object indicates the anti-attack user-defined flood sta-rate-threshold for the VAP.
INT hwVapAntiAttackIGMPFloodBlacklistSwitch	1.3.6.1.4.1.2011.6.139.11.1.20.1.53	INTEGER	read-write	This object indicates the status of the VAP anti-attack IGMP flood blacklist function. The default value is 1.
U32 hwVapAntiAttackIGMPFloodStaRateThreshold	1.3.6.1.4.1.2011.6.139.11.1.20.1.52	Unsigned32	read-write	This object indicates the anti-attack IGMP flood sta-rate-threshold for the VAP. The default value is 4.
INT hwVapAntiAttackIGMPFloodSwitch	1.3.6.1.4.1.2011.6.139.11.1.20.1.51	INTEGER	read-write	This object indicates the status of the VAP anti-attack IGMP flood function. The default value is 2.
INT hwVapAntiAttackNDFloodBlacklistSwitch	1.3.6.1.4.1.2011.6.139.11.1.20.1.50	INTEGER	read-write	This object indicates the status of the VAP anti-attack ND flood blacklist function. The default value is 1.
U32 hwVapAntiAttackNDFloodStaRateThreshold	1.3.6.1.4.1.2011.6.139.11.1.20.1.49	Unsigned32	read-write	This object indicates the anti-attack ND flood sta-rate-threshold for the VAP. The default value is 16.
INT hwVapAntiAttackNDFloodSwitch	1.3.6.1.4.1.2011.6.139.11.1.20.1.48	INTEGER	read-write	This object indicates the status of the VAP anti-attack ND flood function. The default value is 2.
hwVapAntiAttackUserDefFloodEntry	1.3.6.1.4.1.2011.6.139.11.1.79.1		not-accessible	Indexes of this table are hwVapAntiAttackDefFloodIndex and hwVapProfileName.
hwVapAntiAttackUserDefFloodGroups	1.3.6.1.4.1.2011.6.139.11.2.2.79			Description.
hwVapAntiAttackUserDefFloodTable	1.3.6.1.4.1.2011.6.139.11.1.79		not-accessible	This table describes SAC profile action configurations.This table is used to configure actions in an SAC profile.
OCT hwVapApZoneName	1.3.6.1.4.1.2011.6.139.11.1.20.1.76	OCTET STRING	read-write	This object indicates the zone name of vap.
INT hwVapArpBindCheck	1.3.6.1.4.1.2011.6.139.11.1.20.1.21	INTEGER	read-write	This object indicates the status of the ARP binding relationship check function. The default value is 1.
OCT hwVapAuthenticationProfile	1.3.6.1.4.1.2011.6.139.11.1.20.1.29	OCTET STRING	read-write	The object indicates the authentication profile that is bound to the VAP. The default value is default.
INT hwVapAutonavigationRoamOptimizeSwitch	1.3.6.1.4.1.2011.6.139.11.1.20.1.71	INTEGER	read-write	This object indicates whether to enable autonavigation roaming optimization.
OCT hwVapAutoOffEndTime	1.3.6.1.4.1.2011.6.139.11.1.20.1.6	OCTET STRING	read-write	This object indicates the end time of VAP profile. The format is HH:MM:SS.
OCT hwVapAutoOffStartTime	1.3.6.1.4.1.2011.6.139.11.1.20.1.5	OCTET STRING	read-write	This object indicates the start time of VAP profile. The format is HH:MM:SS.
INT hwVapBackUpMode	1.3.6.1.4.1.2011.6.139.11.1.20.1.63	INTEGER	read-only	This object indicates the mode of the switch which triges vap on or off.
INT hwVapBackUpState	1.3.6.1.4.1.2011.6.139.11.1.20.1.62	INTEGER	read-write	This object indicates the state of the radiusdownBackup vap.
INT hwVapBandSteerSwitch	1.3.6.1.4.1.2011.6.139.11.1.20.1.16	INTEGER	read-write	This object indicates the status of the band steering function. The default value is 2.
OCT hwVapDefenceProfile	1.3.6.1.4.1.2011.6.139.11.1.20.1.54	OCTET STRING	read-write	The object indicates the Defence profile that is bound to the VAP.
INT hwVapDhcpTrustPort	1.3.6.1.4.1.2011.6.139.11.1.20.1.24	INTEGER	read-write	This object indicates the status of the radio interface DHCP trust function. The default value is 1.
INT hwVapForwardMode	1.3.6.1.4.1.2011.6.139.11.1.20.1.2	INTEGER	read-write	This object indicates the service forwarding mode. The default value is 2.
INT hwVapHighwayEnable	1.3.6.1.4.1.2011.6.139.11.1.20.1.68	INTEGER	read-write	This object indicates the status of vap highway status. The default value is 1.
OCT hwVapHotspot2Profile	1.3.6.1.4.1.2011.6.139.11.1.20.1.33	OCTET STRING	read-write	The object indicates the Hotspot2.0 profile that is bound to the VAP.
INT hwVapiConnectSwitch	1.3.6.1.4.1.2011.6.139.11.1.20.1.80	INTEGER	read-write	This object indicates the switch of iconnect. The default value is 1.
INT hwVapIpBindCheck	1.3.6.1.4.1.2011.6.139.11.1.20.1.20	INTEGER	read-write	This object indicates the status of the IP binding relationship check function. The default value is 1.
INT hwVapKeepServiceSwitch	1.3.6.1.4.1.2011.6.139.11.1.20.1.65	INTEGER	read-write	This object indicates the status of vap keep service function. The default value is 2.
INT hwVapLearnIpv4Address	1.3.6.1.4.1.2011.6.139.11.1.20.1.17	INTEGER	read-write	This object indicates the status of the IPv4 address learning function. The default value is 2.
INT hwVapLearnIpv4AddressIpconflictuncheck	1.3.6.1.4.1.2011.6.139.11.1.20.1.59	INTEGER	read-write	This object indicates the status of the IPv4 address conflict check function. The default value is 1.
INT hwVapLearnIpv4AddressStrict	1.3.6.1.4.1.2011.6.139.11.1.20.1.19	INTEGER	read-write	This object indicates the status of the strict address learning (only through the DHCP) function. The default value is 1.
INT hwVapLearnIpv6Address	1.3.6.1.4.1.2011.6.139.11.1.20.1.18	INTEGER	read-write	This object indicates the status of the IPv6 address learning function. The default value is 2.
INT hwVapLearnIpv6AddressIpconflictuncheck	1.3.6.1.4.1.2011.6.139.11.1.20.1.60	INTEGER	read-write	This object indicates the status of the IPv6 address conflict check function. The default value is 1.
INT hwVapLearnIpv6AddressStrict	1.3.6.1.4.1.2011.6.139.11.1.20.1.44	INTEGER	read-write	This object indicates the status of the strict address learning (only through the DHCPv6) function. The default value is 1.
INT hwVapMdnsPolicyLocalACSwitch	1.3.6.1.4.1.2011.6.139.11.1.20.1.72	INTEGER	read-write	This object indicates the status of vap MDNS policy on local ac. The default value is 1.
U32 hwVapNaviACID	1.3.6.1.4.1.2011.6.139.11.1.20.1.66	Unsigned32	read-write	This object indicates the AC index.
U32 hwVapNaviACWlanId	1.3.6.1.4.1.2011.6.139.11.1.20.1.67	Unsigned32	read-write	This object indicates the wlan index.
INT hwVapNdTrustPort	1.3.6.1.4.1.2011.6.139.11.1.20.1.25	INTEGER	read-write	This object indicates the status of the radio interface ND trust function. The default value is 1.
INT hwVapOptinon82CidMacFormat	1.3.6.1.4.1.2011.6.139.11.1.20.1.39	INTEGER	read-write	This object indicates the AP MAC address format of circuit-id(CID) in the Option 82 field to DHCP messages. The default value is 0.
OCT hwVapOptinon82CidUserDefined	1.3.6.1.4.1.2011.6.139.11.1.20.1.38	OCTET STRING	read-write	This object indicates the user-defined format of circuit-id(CID) in the Option 82 field to DHCP messages.
INT hwVapOptinon82InsertCidFormat	1.3.6.1.4.1.2011.6.139.11.1.20.1.37	INTEGER	read-write	This object indicates the format of circuit-id(CID) in the Option 82 field to DHCP messages. The default value is 1.
INT hwVapOptinon82InsertRidFormat	1.3.6.1.4.1.2011.6.139.11.1.20.1.23	INTEGER	read-write	This object indicates the format of remote-id(RID) in the Option 82 field to DHCP messages. The default value is 1.
INT hwVapOptinon82InsertSwitch	1.3.6.1.4.1.2011.6.139.11.1.20.1.22	INTEGER	read-write	This object indicates the status of the function of appending the Option 82 field to DHCP messages. The default value is 1.
INT hwVapOptinon82RidMacFormat	1.3.6.1.4.1.2011.6.139.11.1.20.1.36	INTEGER	read-write	This object indicates the AP MAC address format of remote-id(RID) in the Option 82 field to DHCP messages. The default value is 0.
OCT hwVapOptinon82RidUserDefined	1.3.6.1.4.1.2011.6.139.11.1.20.1.35	OCTET STRING	read-write	This object indicates the user-defined format of remote-id(RID) in the Option 82 field to DHCP messages.
OCT hwVapPermitVlanList	1.3.6.1.4.1.2011.6.139.11.1.20.1.56	OCTET STRING	read-write	This object indicates the PermitVlanList. The default value is 0.
INT hwVAPProfileAntiAttackBlacklistSwitch	1.3.6.1.4.1.2011.6.139.11.1.96.1.4	INTEGER	read-write	This object indicates the status of the VAP anti-attack ARP flood blacklist function. The default value is 1.
hwVAPProfileAntiAttackEntry	1.3.6.1.4.1.2011.6.139.11.1.96.1		not-accessible	The indexes of this table are hwVapProfileName, hwVAPProfileAntiAttackPacketType
hwVAPProfileAntiAttackGroups	1.3.6.1.4.1.2011.6.139.11.2.2.96			Description.
INT hwVAPProfileAntiAttackPacketType	1.3.6.1.4.1.2011.6.139.11.1.96.1.1	INTEGER	not-accessible	This object indicates the packet type of the VAP anti-attack flood function.This parameter has no default value.
ROW hwVAPProfileAntiAttackRowStatus	1.3.6.1.4.1.2011.6.139.11.1.96.1.5	RowStatus	read-create	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
U32 hwVAPProfileAntiAttackStaRateThreshold	1.3.6.1.4.1.2011.6.139.11.1.96.1.3	Unsigned32	read-write	This object indicates the anti-attack flood sta-rate-threshold for the VAP. The default value is related to the protocol type. arp:4(pps), nd:8(pps), igmp:4(pps), dhcp:4(pps), dhcpv6:4(pps), mdns:4(pps), other multicast:10(pps), other boradcast:10(pps).
INT hwVAPProfileAntiAttackSwitch	1.3.6.1.4.1.2011.6.139.11.1.96.1.2	INTEGER	read-write	This object indicates the status of the VAP anti-attack flood function. The default value is 2.
hwVAPProfileAntiAttackTable	1.3.6.1.4.1.2011.6.139.11.1.96		not-accessible	This table is used to configure vap anti-attack information.
INT hwVapProfileDynamicFlowInspection	1.3.6.1.4.1.2011.6.139.11.1.20.1.79	INTEGER	read-write	This object indicates the switch of dynamic flow inspection. The default value is 1.
hwVapProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.20.1		not-accessible	The index of this table is hwVapProfileName.
hwVapProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.19			Description.
INT hwVapProfileMdnsSnooping	1.3.6.1.4.1.2011.6.139.11.1.20.1.73	INTEGER	read-write	This object indicates the switch of MDNS snooping. The default value is 1.
INT hwVapProfileMuBaTriggerMode	1.3.6.1.4.1.2011.6.139.11.1.20.1.78	INTEGER	read-write	This object indicates the trigger mode of sending MU-BA. The default value is 2.
OCT hwVapProfileName	1.3.6.1.4.1.2011.6.139.11.1.20.1.1	OCTET STRING	not-accessible	This object indicates the name of a VAP profile. It is the index of the table.
ROW hwVapProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.20.1.31	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.? ROWSTATUS_UNDEFINED: undefined? ROWSTATUS_ACTIVE: active? ROWSTATUS_NOTINSERVICE: notInService? ROWSTATUS_NOTREADY: notReady? ROWSTATUS_CREATEANDFLOW: createAndGo? ROWSTATUS_CREATEANDWAIT: createAndWait? ROWSTATUS_DESTROY: destroy.
hwVapProfileTable	1.3.6.1.4.1.2011.6.139.11.1.20		not-accessible	This table is used to configure and query VAP profile parameters.
U32 hwVapRadio	1.3.6.1.4.1.2011.6.139.11.1.20.1.77	Unsigned32	read-write	This object indicates the radio that vap takes effect. The default value is 0.
INT hwVapRadiusState	1.3.6.1.4.1.2011.6.139.11.1.20.1.64	INTEGER	read-only	This object indicates the state of radius server.
OCT hwVapRadiusTemplate	1.3.6.1.4.1.2011.6.139.11.1.20.1.61	OCTET STRING	read-write	This object indicates the name of radius-server template.
INT hwVapRoamHomeAgent	1.3.6.1.4.1.2011.6.139.11.1.20.1.13	INTEGER	read-write	This object indicates the tunnel endpoint for inter-Layer 3 roaming. The default value is 1..
INT hwVapRoamLayer3Switch	1.3.6.1.4.1.2011.6.139.11.1.20.1.15	INTEGER	read-write	This object indicates the status of the Layer 3 roaming function. The default value is 2.
U32 hwVapRoamVlanMobilityGroup	1.3.6.1.4.1.2011.6.139.11.1.20.1.14	Unsigned32	read-write	This object indicates the VLAN group for roaming. For the same VLAN, if the VAP is in different VLAN groups for roaming, the roaming is also inter-Layer 3 roaming. The default value is 1..
OCT hwVapSacProfile	1.3.6.1.4.1.2011.6.139.11.1.20.1.30	OCTET STRING	read-write	The object indicates the SAC profile that is bound to the VAP.
OCT hwVapSecurityProfile	1.3.6.1.4.1.2011.6.139.11.1.20.1.26	OCTET STRING	read-write	The object indicates the security profile that is bound to the VAP. The default value is default.
U32 hwVapServiceExpAnalysisSnoopingPort	1.3.6.1.4.1.2011.6.139.11.1.20.1.70	Unsigned32	read-write	This object indicates SIP snooping port. The default value is 5060.
INT hwVapServiceExpAnalysisSwitch	1.3.6.1.4.1.2011.6.139.11.1.20.1.69	INTEGER	read-write	This object indicates the status of service experience analysis. The default value is 1.
INT hwVapServiceSwitch	1.3.6.1.4.1.2011.6.139.11.1.20.1.4	INTEGER	read-write	This object indicates the status of the VAP service function. The default value is 2.
U32 hwVapServiceVlan	1.3.6.1.4.1.2011.6.139.11.1.20.1.8	Unsigned32	read-write	This object indicates the service VLAN for the VAP. The default value is 1.
INT hwVapSfnRoamSwitch	1.3.6.1.4.1.2011.6.139.11.1.20.1.57	INTEGER	read-write	This object indicates the status of the SFN Roam function. The default value is 1.
U32 hwVapSplitTunnelAcl	1.3.6.1.4.1.2011.6.139.11.1.20.1.74	Unsigned32	read-write	This object indicates configure of split tunnel ACL.
U32 hwVapSplitTunnelAclIPv6	1.3.6.1.4.1.2011.6.139.11.1.20.1.75	Unsigned32	read-write	This object indicates configure of split tunnel IPv6 ACL.
OCT hwVapSsidProfile	1.3.6.1.4.1.2011.6.139.11.1.20.1.28	OCTET STRING	read-write	The object indicates the SSID profile that is bound to the VAP. The default value is default.
INT hwVapStaAccessMode	1.3.6.1.4.1.2011.6.139.11.1.20.1.11	INTEGER	read-write	This object indicates the access mode. The default value is 1.
OCT hwVapStaAccessModePorfile	1.3.6.1.4.1.2011.6.139.11.1.20.1.12	OCTET STRING	read-write	This object indicates blacklist and whitelist profiles.
INT hwVapStaNetworkDetectSwitch	1.3.6.1.4.1.2011.6.139.11.1.20.1.58	INTEGER	read-write	This object indicates the status of sta network reachable detect function. The default value is 2.
INT hwVapTemporaryManagementSwitch	1.3.6.1.4.1.2011.6.139.11.1.20.1.7	INTEGER	read-write	If this parameter is set to 2, the VAP automatically becomes the management VAP for offline APs after the AP is disconnected. It can still send signals so that maintenance personnel can access it to identify faults (the security mode is the non-authentication security mode and the SSID will be hidden). The default value is 1.
OCT hwVapTimeRange	1.3.6.1.4.1.2011.6.139.11.1.20.1.55	OCTET STRING	read-write	The object indicates the TimeRange .
OCT hwVapTrafficProfile	1.3.6.1.4.1.2011.6.139.11.1.20.1.27	OCTET STRING	read-write	The object indicates the traffic profile that is bound to the VAP. The default value is default.
U32 hwVapTunnelForwardProtocol	1.3.6.1.4.1.2011.6.139.11.1.20.1.3	Unsigned32	read-write	This object indicates the format of packets forwarded by tunnel. The default value is 0xd.? bit0: dot1x? bit1: dhcp? bit2: http? bit3: wapi? bit4: mdns.
INT hwVapType	1.3.6.1.4.1.2011.6.139.11.1.20.1.10	INTEGER	read-write	This object indicates the VAP type. The default value is 1.
OCT hwVapUccProfile	1.3.6.1.4.1.2011.6.139.11.1.20.1.40	OCTET STRING	read-write	The object indicates the UCC profile that is bound to the VAP.
OCT hwVapUserProfile	1.3.6.1.4.1.2011.6.139.11.1.20.1.32	OCTET STRING	read-write	The object indicates the user profile that is bound to the VAP.
OCT hwVapVlanPool	1.3.6.1.4.1.2011.6.139.11.1.20.1.9	OCTET STRING	read-write	This object indicates the VLAN pool to which the VAP is bound.
OCT hwVenueNameLanguageCodeList	1.3.6.1.4.1.2011.6.139.11.1.52.1.2	OCTET STRING	read-write	A value of LanguageCode indicates a language. It is a string of 2-3 characters. For details about GUI value ranges, see ISO 639 on the Codes for the Representation of Names of Languages page. The path is http://www.loc.gov/standards/iso639-2/php/ code_list.php. chi/zho/zh indicates Chinese and eng/en indicates English. NOTE By default, no configuration is added.Values of LanguageCode are separated by question marks (?).A maximum of 32 LanguageCode values can be configured.A LanguageCode value must match a VenueName value.
OCT hwVenueNameList	1.3.6.1.4.1.2011.6.139.11.1.52.1.3	OCTET STRING	read-write	If the language-code is set to eng, the name is a string of characters. Rules are the same as those for SSIDs. When it is set to other values, the venue-name is set to a hexadecimal UTF-8 code because current WLANs support English only, for example, venue-name language-code ZHO name 025AB1472568. NOTE By default, no configuration is added.A venue-name value cannot exceed 32 characters.venue-name values are separated by question marks (?).A LanguageCode value must match a VenueName value.
hwVenueNameProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.52.1		not-accessible	The index of this table is hwVenueNameProfileName.
hwVenueNameProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.46			Description.
OCT hwVenueNameProfileName	1.3.6.1.4.1.2011.6.139.11.1.52.1.1	OCTET STRING	not-accessible	This object indicates the name of a venue name profile. It is the index of the table.
ROW hwVenueNameProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.52.1.4	RowStatus	read-write	This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
hwVenueNameProfileTable	1.3.6.1.4.1.2011.6.139.11.1.52		not-accessible	This table is used to configure and query venue name profile parameters.
INT hwVlanPoolAssignMethod	1.3.6.1.4.1.2011.6.139.11.1.25.1.3	INTEGER	read-write	This object indicates the VLAN pool allocation algorithm. The default value is 1.
OCT hwVlanPoolName	1.3.6.1.4.1.2011.6.139.11.1.25.1.1	OCTET STRING	not-accessible	This object indicates the VLAN pool name. It is the index of the table.
ROW hwVlanPoolRowStatus	1.3.6.1.4.1.2011.6.139.11.1.25.1.4	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
OCT hwVlanPoolVlanlist	1.3.6.1.4.1.2011.6.139.11.1.25.1.2	OCTET STRING	read-write	This object indicates the VLAN list.
INT hwWdsDhcpTrustPort	1.3.6.1.4.1.2011.6.139.11.1.40.1.4	INTEGER	read-write	This object indicates whether to enable the DHCP trusted port on an AP. The default value is 2.
INT hwWdsMode	1.3.6.1.4.1.2011.6.139.11.1.40.1.3	INTEGER	read-write	This object indicates the mode of the WDS. The default value is 3.
INT hwWdsMuMIMOSwitch	1.3.6.1.4.1.2011.6.139.11.1.40.1.12	INTEGER	read-write	Description.
OCT hwWdsName	1.3.6.1.4.1.2011.6.139.11.1.40.1.2	OCTET STRING	read-write	This object indicates the WDS identifier. The value is a string of case-sensitive characters without question marks and spaces. It cannot begin or end with double quotation marks. The default value is huaweiwds.
INT hwWdsNdTrustPort	1.3.6.1.4.1.2011.6.139.11.1.40.1.9	INTEGER	read-write	This object indicates whether to enable the ND trusted port on an AP. The default value is 2.
INT hwWdsProfileBeacon2gRate	1.3.6.1.4.1.2011.6.139.11.1.40.1.13	INTEGER	read-write	This object indicates the wds 2g beacon rate. The default value is 1.
INT hwWdsProfileBeacon5gRate	1.3.6.1.4.1.2011.6.139.11.1.40.1.14	INTEGER	read-write	This object indicates the wds 5g beacon rate. The default value is 6.
hwWdsProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.40.1		not-accessible	The index of this table is hwWdsProfileName.
hwWdsProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.35			Description.
OCT hwWdsProfileName	1.3.6.1.4.1.2011.6.139.11.1.40.1.1	OCTET STRING	not-accessible	This object indicates the name of a WDS profile. It is the index of the table.
OCT hwWdsProfilePriorityDscpMap80211e	1.3.6.1.4.1.2011.6.139.11.1.40.1.11	OCTET STRING	read-write	Description.
INT hwWdsProfilePriorityMapTrustMode	1.3.6.1.4.1.2011.6.139.11.1.40.1.10	INTEGER	read-write	Description.
ROW hwWdsProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.40.1.8	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.ROWSTATUS_UNDEFINED: undefined ROWSTATUS_ACTIVE: active ROWSTATUS_NOTINSERVICE: notInService ROWSTATUS_NOTREADY: notReady ROWSTATUS_CREATEANDFLOW: createAndGoROWSTATUS_CREATEANDWAIT: createAndWaitROWSTATUS_DESTROY: destroy
hwWdsProfileTable	1.3.6.1.4.1.2011.6.139.11.1.40		not-accessible	This table is used to configure and query WDS profile parameters.
OCT hwWdsSecurityProfileName	1.3.6.1.4.1.2011.6.139.11.1.40.1.6	OCTET STRING	read-write	The object indicates the bound security profile.
OCT hwWdsVlanTagged	1.3.6.1.4.1.2011.6.139.11.1.40.1.5	OCTET STRING	read-write	This object indicates the tagged VLAN in a bridge profile. It is used to add one or a group of VLANs to the WDS bridge profile in tagged mode. By default, no VLAN is configured in the WDS bridge profile.
hwWdsWhitelistEntry	1.3.6.1.4.1.2011.6.139.11.1.42.1		not-accessible	Description.
MAC hwWdsWhitelistPeerApMac	1.3.6.1.4.1.2011.6.139.11.1.42.1.1	MacAddress	not-accessible	Description.
hwWdsWhitelistProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.41.1		not-accessible	Description.
hwWdsWhitelistProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.36			Description.
OCT hwWdsWhitelistProfileName	1.3.6.1.4.1.2011.6.139.11.1.41.1.1	OCTET STRING	not-accessible	Description.
ROW hwWdsWhitelistProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.41.1.2	RowStatus	read-write	Description.
hwWdsWhitelistProfileTable	1.3.6.1.4.1.2011.6.139.11.1.41		not-accessible	Description.
ROW hwWdsWhitelistRowStatus	1.3.6.1.4.1.2011.6.139.11.1.42.1.2	RowStatus	read-write	Description.
hwWdsWhitelistTable	1.3.6.1.4.1.2011.6.139.11.1.42		not-accessible	Description.
U32 hwWidsBruteForceDetectInterval	1.3.6.1.4.1.2011.6.139.11.1.28.1.10	Unsigned32	read-write	This object indicates the interval for brute force attack detection. The default value is 60. It is expressed in s.
U32 hwWidsBruteForceDetectThreshold	1.3.6.1.4.1.2011.6.139.11.1.28.1.11	Unsigned32	read-write	This object indicates the threshold for the number of brute force attack attempts, namely, the threshold for the number of key negotiation failures within a detection period. If the number of brute-force attack attempts exceeds the threshold, the terminal initiates brute force attacks. The default value is 20.
U32 hwWidsBruteForceQuietTime	1.3.6.1.4.1.2011.6.139.11.1.28.1.12	Unsigned32	read-write	This object indicates the quiet period for brute force attack alarm reporting. The default value is 600 seconds.
I32 hwWidsContainMinRssi	1.3.6.1.4.1.2011.6.139.11.1.28.1.21	Integer32	read-write	This object indicates min Rssi for contain.
U32 hwWidsContainMinStaNum	1.3.6.1.4.1.2011.6.139.11.1.28.1.22	Unsigned32	read-write	This object indicates min sta num for contain.
U32 hwWidsDeviceReportInterval	1.3.6.1.4.1.2011.6.139.11.1.28.1.6	Unsigned32	read-write	This object indicates the device detection reporting interval. The default value is 300 seconds. In V200R019C10 and later versions, the value range changes to 60-3600.
U32 hwWidsDeviceSyncInterval	1.3.6.1.4.1.2011.6.139.11.1.28.1.7	Unsigned32	read-write	This object indicates the interval for APs to report all device information to an AC. The default value is 360 minutes.
INT hwWidsDynamicBlackListSwitch	1.3.6.1.4.1.2011.6.139.11.1.28.1.18	INTEGER	read-write	This object indicates the status of the dynamic blacklist function. The default value is 2.
U32 hwWidsFloodDetectInterval	1.3.6.1.4.1.2011.6.139.11.1.28.1.13	Unsigned32	read-write	This object indicates the flood attack detection interval. The default value is 10. It is expressed in s.
U32 hwWidsFloodDetectThreshold	1.3.6.1.4.1.2011.6.139.11.1.28.1.14	Unsigned32	read-write	This object indicates the threshold for food attack detection. If the number of packets of the same type received within a detection period exceeds the threshold, flood attacks occur. The default value is 500.
U32 hwWidsFloodQuietTime	1.3.6.1.4.1.2011.6.139.11.1.28.1.15	Unsigned32	read-write	This object indicates the quiet period for flood attack alarm reporting. The default value is 600 seconds.
hwWidsProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.28.1		not-accessible	The index of this table is hwWidsProfileName.
hwWidsProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.26			Description.
OCT hwWidsProfileName	1.3.6.1.4.1.2011.6.139.11.1.28.1.1	OCTET STRING	not-accessible	This object indicates the name of a WIDS profile. It is the index of the table.
ROW hwWidsProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.28.1.5	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
hwWidsProfileTable	1.3.6.1.4.1.2011.6.139.11.1.28		not-accessible	This table is used to configure WIDS classify profiles, WIDS attack profiles, and WIDS contain profiles.
U32 hwWidsRogueContainModeBmp	1.3.6.1.4.1.2011.6.139.11.1.28.1.19	Unsigned32	read-write	This object indicates the bit map of rogue device countering types. The default value is 0.
OCT hwWidsSpoofProfile	1.3.6.1.4.1.2011.6.139.11.1.28.1.8	OCTET STRING	read-write	This object indicates the name of a WIDS spoof profile.
hwWidsSpoofProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.32.1		not-accessible	The indexes of this table are hwWidsSpoofProfileName and hwWidsSpoofSsidRegex.
hwWidsSpoofProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.30			Description.
hwWidsSpoofProfileListEntry	1.3.6.1.4.1.2011.6.139.11.1.62.1		not-accessible	The index of this table is hwWidsSpoofProfileListProfileName.
hwWidsSpoofProfileListGroups	1.3.6.1.4.1.2011.6.139.11.2.2.55			Description.
OCT hwWidsSpoofProfileListProfileName	1.3.6.1.4.1.2011.6.139.11.1.62.1.1	OCTET STRING	not-accessible	This object indicates the name of a WIDS spoof SSID profile.
ROW hwWidsSpoofProfileListRowStatus	1.3.6.1.4.1.2011.6.139.11.1.62.1.2	RowStatus	read-write	This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
hwWidsSpoofProfileListTable	1.3.6.1.4.1.2011.6.139.11.1.62		not-accessible	This table is used to create or delete WIDS spoof SSID profiles.
OCT hwWidsSpoofProfileName	1.3.6.1.4.1.2011.6.139.11.1.32.1.1	OCTET STRING	not-accessible	This object indicates the name of a WIDS spoof profile. It is the index of the table.
ROW hwWidsSpoofProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.32.1.3	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
hwWidsSpoofProfileTable	1.3.6.1.4.1.2011.6.139.11.1.32		not-accessible	This table is used to configure matching rules for spoof APs.
U32 hwWidsSpoofQuietTime	1.3.6.1.4.1.2011.6.139.11.1.28.1.17	Unsigned32	read-write	This object indicates the quiet period for spoofing attack alarm reporting. The default value is 600 seconds.
OCT hwWidsSpoofSsidRegex	1.3.6.1.4.1.2011.6.139.11.1.32.1.2	OCTET STRING	not-accessible	This object indicates the matching rules for spoofing SSIDs.
OCT hwWidsStaWhitelistProfile	1.3.6.1.4.1.2011.6.139.11.1.28.1.20	OCTET STRING	read-write	This object indicates the name of a sta whitelist profile.
U32 hwWidsWeakIvQuietTime	1.3.6.1.4.1.2011.6.139.11.1.28.1.16	Unsigned32	read-write	This object indicates the quiet period for weak IV attack alarm reporting. The default value is 600 seconds.
OCT hwWidsWhitelistProfile	1.3.6.1.4.1.2011.6.139.11.1.28.1.9	OCTET STRING	read-write	This object indicates the name of a WIDS confident profile.
hwWidsWhitelistProfileGroups	1.3.6.1.4.1.2011.6.139.11.2.2.31			Description.
hwWidsWhitelistProfileListEntry	1.3.6.1.4.1.2011.6.139.11.1.63.1		not-accessible	The index of this table is hwWidsWhitelistProfileListProfileName.
hwWidsWhitelistProfileListGroups	1.3.6.1.4.1.2011.6.139.11.2.2.56			Description.
OCT hwWidsWhitelistProfileListProfileName	1.3.6.1.4.1.2011.6.139.11.1.63.1.1	OCTET STRING	not-accessible	This object indicates the name of a WIDS confident profile.
ROW hwWidsWhitelistProfileListRowStatus	1.3.6.1.4.1.2011.6.139.11.1.63.1.2	RowStatus	read-write	This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
hwWidsWhitelistProfileListTable	1.3.6.1.4.1.2011.6.139.11.1.63		not-accessible	This table is used to create or delete WIDS confident profiles.
MAC hwWidsWhitelistProfileMac	1.3.6.1.4.1.2011.6.139.11.1.33.1.2	MacAddress	not-accessible	This object indicates the MAC address whitelist.
hwWidsWhitelistProfileMacEntry	1.3.6.1.4.1.2011.6.139.11.1.33.1		not-accessible	The index of this table is hwWidsWhitelistProfileName.
ROW hwWidsWhitelistProfileMacRowStatus	1.3.6.1.4.1.2011.6.139.11.1.33.1.3	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
hwWidsWhitelistProfileMacTable	1.3.6.1.4.1.2011.6.139.11.1.33		not-accessible	This table is used to configure WIDS MAC whitelists.
OCT hwWidsWhitelistProfileName	1.3.6.1.4.1.2011.6.139.11.1.33.1.1	OCTET STRING	not-accessible	This object indicates the name of a WIDS confident profile. It is the index of the table.
OCT hwWidsWhitelistProfileOui	1.3.6.1.4.1.2011.6.139.11.1.34.1.1	OCTET STRING	not-accessible	This object indicates the index of the OUI whitelist in the WIDS confident profile. Its format is XX-XX-XX. XX is a hexadecimal number.
hwWidsWhitelistProfileOuiEntry	1.3.6.1.4.1.2011.6.139.11.1.34.1		not-accessible	The index of this table is hwWidsWhitelistProfileOui.
ROW hwWidsWhitelistProfileOuiRowStatus	1.3.6.1.4.1.2011.6.139.11.1.34.1.2	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
hwWidsWhitelistProfileOuiTable	1.3.6.1.4.1.2011.6.139.11.1.34		not-accessible	This table is used to configure WIDS OUI whitelists.
OCT hwWidsWhitelistProfileSsid	1.3.6.1.4.1.2011.6.139.11.1.35.1.1	OCTET STRING	not-accessible	This object indicates the trusted SSIDs that are case-sensitive.
hwWidsWhitelistProfileSsidEntry	1.3.6.1.4.1.2011.6.139.11.1.35.1		not-accessible	The index of this table is hwWidsWhitelistProfileSsid.
ROW hwWidsWhitelistProfileSsidRowStatus	1.3.6.1.4.1.2011.6.139.11.1.35.1.2	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
hwWidsWhitelistProfileSsidTable	1.3.6.1.4.1.2011.6.139.11.1.35		not-accessible	This table is used to configure WIDS SSID whitelists.
I32 hwWiredPortProfileTrafficFilterACLNum1	1.3.6.1.4.1.2011.6.139.11.1.84.1.4	Integer32	read-write	This object indicates the ACL rule for packet filtering in a wired port profile.
I32 hwWiredPortProfileTrafficFilterACLNum2	1.3.6.1.4.1.2011.6.139.11.1.84.1.5	Integer32	read-write	This object indicates the ACL rule for packet filtering in a wired port profile.
INT hwWiredPortProfileTrafficFilterDirection	1.3.6.1.4.1.2011.6.139.11.1.84.1.1	INTEGER	not-accessible	This object indicates the ACL rule direction for packet filtering in a wired port profile. This parameter has no default value.
hwWiredPortProfileTrafficFilterEntry	1.3.6.1.4.1.2011.6.139.11.1.84.1		not-accessible	The indexes of this table are hwAPWiredPortProfileName, hwWiredPortProfileTrafficFilterID and hwWiredPortProfileTrafficFilterDirection.
U32 hwWiredPortProfileTrafficFilterID	1.3.6.1.4.1.2011.6.139.11.1.84.1.2	Unsigned32	not-accessible	This object indicates the ACL rule ID for packet filtering in a wired port profile. This parameter has no default value.
ROW hwWiredPortProfileTrafficFilterRowStatus	1.3.6.1.4.1.2011.6.139.11.1.84.1.6	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
hwWiredPortProfileTrafficFilterTable	1.3.6.1.4.1.2011.6.139.11.1.84		not-accessible	This table is used to configure QoS filter information.
INT hwWiredPortProfileTrafficFilterType	1.3.6.1.4.1.2011.6.139.11.1.84.1.3	INTEGER	read-write	This object indicates the ACL rule type for packet filtering in a wired port profile. This parameter has no default value.
I32 hwWiredPortProfileTrafficRemarkACLNum1	1.3.6.1.4.1.2011.6.139.11.1.85.1.4	Integer32	read-write	This object indicates the ACL rule for packet remarking in a wired port profile.
I32 hwWiredPortProfileTrafficRemarkACLNum2	1.3.6.1.4.1.2011.6.139.11.1.85.1.5	Integer32	read-write	This object indicates the ACL rule for packet remarking in a wired port profile.
INT hwWiredPortProfileTrafficRemarkDirection	1.3.6.1.4.1.2011.6.139.11.1.85.1.1	INTEGER	not-accessible	This object indicates the ACL rule direction for packet remarking in a wired port profile. This parameter has no default value.
hwWiredPortProfileTrafficRemarkEntry	1.3.6.1.4.1.2011.6.139.11.1.85.1		not-accessible	The indexes of this table are hwAPWiredPortProfileName, hwWiredPortProfileTrafficRemarkDirection and hwWiredPortProfileTrafficRemarkID.
U32 hwWiredPortProfileTrafficRemarkID	1.3.6.1.4.1.2011.6.139.11.1.85.1.2	Unsigned32	not-accessible	This object indicates the ACL rule ID for packet remarking in a wired port profile. This parameter has no default value.
INT hwWiredPortProfileTrafficRemarkIPType	1.3.6.1.4.1.2011.6.139.11.1.85.1.3	INTEGER	read-write	This object indicates the ACL rule IP type for packet remarking in a wired port profile. This parameter has no default value.
ROW hwWiredPortProfileTrafficRemarkRowStatus	1.3.6.1.4.1.2011.6.139.11.1.85.1.8	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
hwWiredPortProfileTrafficRemarkTable	1.3.6.1.4.1.2011.6.139.11.1.85		not-accessible	This table is used to configure QoS remark information.
INT hwWiredPortProfileTrafficRemarkType	1.3.6.1.4.1.2011.6.139.11.1.85.1.6	INTEGER	read-write	This object indicates the ACL rule mask type for packet remarking in a wired port profile. This parameter has no default value.
I32 hwWiredPortProfileTrafficRemarkValue	1.3.6.1.4.1.2011.6.139.11.1.85.1.7	Integer32	read-write	This object indicates the ACL rule mask value for packet remarking in a wired port profile. This parameter has no default value.
IP hwWlanAcIPv4Address	1.3.6.1.4.1.2011.6.139.11.1.58.2.1.2	IpAddress	read-write	This object indicates the AC's IPv4 address.
OCT hwWlanAcIPv6Address	1.3.6.1.4.1.2011.6.139.11.1.58.2.1.3	OCTET STRING	read-write	This object indicates the AC's IPv6 address.
ROW hwWlanAcRowStatus	1.3.6.1.4.1.2011.6.139.11.1.58.2.1.5	RowStatus	read-write	This object indicates the row status.
INT hwWlanAcState	1.3.6.1.4.1.2011.6.139.11.1.58.2.1.4	INTEGER	read-only	This object indicates the state of connections to the AC.
INT hwWlanApAuthMode	1.3.6.1.4.1.2011.6.139.11.1.2.1	INTEGER	read-write	This object indicates the AP authentication mode. The default value is 1.
I32 hwWlanApDataCollectionInterval	1.3.6.1.4.1.2011.6.139.11.1.1.7	Integer32	read-write	This object indicates the period of caching AP performance. The default value is 15. It is expressed in minutes.
hwWlanApMacBlacklistEntry	1.3.6.1.4.1.2011.6.139.11.1.2.4.1		not-accessible	The index of this table is hwWlanApMacBlacklistMacAddr.
MAC hwWlanApMacBlacklistMacAddr	1.3.6.1.4.1.2011.6.139.11.1.2.4.1.1	MacAddress	not-accessible	This object indicates the MAC address of an AP.
ROW hwWlanApMacBlacklistRowStatus	1.3.6.1.4.1.2011.6.139.11.1.2.4.1.2	RowStatus	read-create	This object indicates the row status of this table.
hwWlanApMacBlacklistTable	1.3.6.1.4.1.2011.6.139.11.1.2.4		not-accessible	This table describes the AP MAC blacklist.This table is used to add an AP's MAC address to the blacklist or delete an AP's MAC address from the blacklist.
hwWlanApMacWhitelistEntry	1.3.6.1.4.1.2011.6.139.11.1.2.2.1		not-accessible	The index of this table is hwWlanApMacWhitelistMacAddr.
MAC hwWlanApMacWhitelistMacAddr	1.3.6.1.4.1.2011.6.139.11.1.2.2.1.1	MacAddress	not-accessible	This object indicates the MAC address of an AP.
ROW hwWlanApMacWhitelistRowStatus	1.3.6.1.4.1.2011.6.139.11.1.2.2.1.2	RowStatus	read-create	This object indicates the row status of this table.
hwWlanApMacWhitelistTable	1.3.6.1.4.1.2011.6.139.11.1.2.2		not-accessible	This table is used to add and delete AP MAC addresses in the white lists.
hwWlanAPProvision	1.3.6.1.4.1.2011.6.139.11.1.56
INT hwWlanAPProvisionAddressMode	1.3.6.1.4.1.2011.6.139.11.1.56.1	INTEGER	read-write	This object indicates the IPv4 address allocation mode.
INT hwWlanAPProvisionAPMode	1.3.6.1.4.1.2011.6.139.11.1.56.15	INTEGER	read-write	This object indicates the AP mode.
I32 hwWlanAPProvisionCommitAll	1.3.6.1.4.1.2011.6.139.11.1.56.17	Integer32	read-write	This object indicates that the configuration is delivered to all APs.
OCT hwWlanAPProvisionCommitAPGroup	1.3.6.1.4.1.2011.6.139.11.1.56.14	OCTET STRING	read-write	This object indicates that the configuration is delivered based on AP groups.
U32 hwWlanAPProvisionCommitAPId	1.3.6.1.4.1.2011.6.139.11.1.56.16	Unsigned32	read-write	This object indicates that the configuration is delivered based on AP ID.
MAC hwWlanAPProvisionCommitAPMac	1.3.6.1.4.1.2011.6.139.11.1.56.13	MacAddress	read-write	This object indicates that the configuration is delivered based on MAC addresses of APs.
OCT hwWlanAPProvisionCommitAPName	1.3.6.1.4.1.2011.6.139.11.1.56.12	OCTET STRING	read-write	This object indicates that the configuration is delivered based on AP names.
OCT hwWlanAPProvisionGroupName	1.3.6.1.4.1.2011.6.139.11.1.56.8	OCTET STRING	read-write	This object indicates the group name.
OCT hwWlanAPProvisionIPv4ACList	1.3.6.1.4.1.2011.6.139.11.1.56.10	OCTET STRING	read-write	This object indicates the AC IPv4 address list. NOTE ACL rules are separated by question marks (?).A maximum of four ACL rules can be configured.
IP hwWlanAPProvisionIPv4Address	1.3.6.1.4.1.2011.6.139.11.1.56.2	IpAddress	read-write	This object indicates the AP's IPv4 address. hwWlanAPProvisionIPv4Address takes effect if hwAPIPv4Method is set to static.
IP hwWlanAPProvisionIPv4Gateway	1.3.6.1.4.1.2011.6.139.11.1.56.4	IpAddress	read-write	This object indicates the AP's IPv4 gateway. hwWlanAPProvisionIPv4Gateway takes effect if hwAPIPv4Method is set to static.
IP hwWlanAPProvisionIPv4Mask	1.3.6.1.4.1.2011.6.139.11.1.56.3	IpAddress	read-write	This object indicates the AP's IPv4 mask. hwWlanAPProvisionIPv4Mask takes effect if hwAPIPv4Method is set to static.
OCT hwWlanAPProvisionIPv6ACList	1.3.6.1.4.1.2011.6.139.11.1.56.11	OCTET STRING	read-write	This object indicates the AC IPv6 address list. NOTE ACL rules are separated by question marks (?).A maximum of four ACL rules can be configured.
OCT hwWlanAPProvisionIPv6Address	1.3.6.1.4.1.2011.6.139.11.1.56.5	OCTET STRING	read-write	This object indicates the AP's IPv6 address. hwWlanAPProvisionIPv6Address takes effect if hwAPIPv6Method is set to static.
OCT hwWlanAPProvisionIPv6Gateway	1.3.6.1.4.1.2011.6.139.11.1.56.7	OCTET STRING	read-write	This object indicates the AP's IPv6 gateway. hwWlanAPProvisionIPv6Gateway takes effect if hwAPIPv6Method is set to static.
U32 hwWlanAPProvisionIPv6PrefixLen	1.3.6.1.4.1.2011.6.139.11.1.56.6	Unsigned32	read-write	This object indicates the length of the IPv6 address prefix.
U32 hwWlanAPProvisionManagementVlan	1.3.6.1.4.1.2011.6.139.11.1.56.18	Unsigned32	read-write	This object indicates that the AP management vlan.
OCT hwWlanAPProvisionName	1.3.6.1.4.1.2011.6.139.11.1.56.9	OCTET STRING	read-write	This object indicates the name of an AP.
hwWlanApPwdPolicyConfig	1.3.6.1.4.1.2011.6.139.11.1.1.18
hwWlanApSnWhitelistEntry	1.3.6.1.4.1.2011.6.139.11.1.2.3.1		not-accessible	The index of this table is hwWlanApSnWhitelistSn.
ROW hwWlanApSnWhitelistRowStatus	1.3.6.1.4.1.2011.6.139.11.1.2.3.1.2	RowStatus	read-create	Indicate the row status of this table.
OCT hwWlanApSnWhitelistSn	1.3.6.1.4.1.2011.6.139.11.1.2.3.1.1	OCTET STRING	not-accessible	Description.
hwWlanApSnWhitelistTable	1.3.6.1.4.1.2011.6.139.11.1.2.3		not-accessible	This table is used to add and delete AP sequence numbers in the white lists of AP sequence numbers.
hwWlanBackupHsbConfig	1.3.6.1.4.1.2011.6.139.11.1.1.13
INT hwWlanBLEBroadcasterEnable	1.3.6.1.4.1.2011.6.139.11.1.73.1.2	INTEGER	read-write	Description.
U32 hwWlanBLEBroadcastingInterval	1.3.6.1.4.1.2011.6.139.11.1.73.1.8	Unsigned32	read-write	Description.
OCT hwWlanBLEBroadcastingMajor	1.3.6.1.4.1.2011.6.139.11.1.73.1.5	OCTET STRING	read-write	This object indicates the string type value of Major field in the BLE broadcast frame.
I32 hwWlanBLEBroadcastingMajorDecimal	1.3.6.1.4.1.2011.6.139.11.1.73.1.13	Integer32	read-write	This object indicates the decimal type value of Major field in the BLE broadcast frame. The default value is -1.
OCT hwWlanBLEBroadcastingMajorHex	1.3.6.1.4.1.2011.6.139.11.1.73.1.12	OCTET STRING	read-write	This object indicates the hex type value of Major field in the BLE broadcast frame.
OCT hwWlanBLEBroadcastingMinor	1.3.6.1.4.1.2011.6.139.11.1.73.1.6	OCTET STRING	read-write	This object indicates the string type value of Minor field in the BLE broadcast frame.
I32 hwWlanBLEBroadcastingMinorDecimal	1.3.6.1.4.1.2011.6.139.11.1.73.1.15	Integer32	read-write	This object indicates the decimal type value of Minor field in the BLE broadcast frame. The default value is -1.
OCT hwWlanBLEBroadcastingMinorHex	1.3.6.1.4.1.2011.6.139.11.1.73.1.14	OCTET STRING	read-write	This object indicates the hex type value of Minor field in the BLE broadcast frame.
I32 hwWlanBLEBroadcastingReferenceRSSI	1.3.6.1.4.1.2011.6.139.11.1.73.1.7	Integer32	read-write	Description.
OCT hwWlanBLEBroadcastingUUID	1.3.6.1.4.1.2011.6.139.11.1.73.1.4	OCTET STRING	read-write	This object indicates the string type value of UUID field in the BLE broadcast frame.
OCT hwWlanBLEBroadcastingUUIDHex	1.3.6.1.4.1.2011.6.139.11.1.73.1.11	OCTET STRING	read-write	This object indicates the hex type value of UUID field in the BLE broadcast frame.
U32 hwWlanBLEEquipReportInterval	1.3.6.1.4.1.2011.6.139.11.1.1.22	Unsigned32	read-write	Description.
I32 hwWlanBLELowPowerWarningThreshold	1.3.6.1.4.1.2011.6.139.11.1.1.16	Integer32	read-write	Description.
MAC hwWlanBLEMonitoringListMac	1.3.6.1.4.1.2011.6.139.11.1.1.17.1.1	MacAddress	not-accessible	Description.
ROW hwWlanBLEMonitoringListRowStatue	1.3.6.1.4.1.2011.6.139.11.1.1.17.1.2	RowStatus	read-write	Description.
hwWlanBLEMonitorListEntry	1.3.6.1.4.1.2011.6.139.11.1.1.17.1		not-accessible	Description.
hwWlanBLEMonitorListTable	1.3.6.1.4.1.2011.6.139.11.1.1.17		not-accessible	Description.
OCT hwWlanBLEProfileName	1.3.6.1.4.1.2011.6.139.11.1.73.1.1	OCTET STRING	not-accessible	Description.
ROW hwWlanBLEProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.73.1.10	RowStatus	read-write	This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
INT hwWlanBLEReportEnable	1.3.6.1.4.1.2011.6.139.11.1.73.1.17	INTEGER	read-write	Description.
I32 hwWlanBLEReportInterval	1.3.6.1.4.1.2011.6.139.11.1.73.1.19	Integer32	read-write	Description.
INT hwWlanBLEReportMode	1.3.6.1.4.1.2011.6.139.11.1.73.1.18	INTEGER	read-write	Description.
IP hwWlanBLEReportServerIPAddress	1.3.6.1.4.1.2011.6.139.11.1.73.1.20	IpAddress	read-write	Description.
OCT hwWlanBLEReportServerIPv6Address	1.3.6.1.4.1.2011.6.139.11.1.73.1.21	OCTET STRING	read-write	Description.
U32 hwWlanBLEReportServerPort	1.3.6.1.4.1.2011.6.139.11.1.73.1.22	Unsigned32	read-write	Description.
INT hwWlanBLEReportServerViaACEnable	1.3.6.1.4.1.2011.6.139.11.1.73.1.23	INTEGER	read-write	Description.
U32 hwWlanBLEReportServerViaACPort	1.3.6.1.4.1.2011.6.139.11.1.73.1.24	Unsigned32	read-write	Description.
OCT hwWlanBLEServerAddressDomain	1.3.6.1.4.1.2011.6.139.11.1.73.1.27	OCTET STRING	read-write	This object indicates server's domain name.
INT hwWlanBLESnifferEnable	1.3.6.1.4.1.2011.6.139.11.1.73.1.9	INTEGER	read-write	Description.
INT hwWlanBLESnifferMode	1.3.6.1.4.1.2011.6.139.11.1.73.1.16	INTEGER	read-write	Description.
IP hwWlanBLESourceIPAddress	1.3.6.1.4.1.2011.6.139.11.1.73.1.25	IpAddress	read-write	This object indicates the source IPv4 address for reporting ble location data. You choose an IPv4 address.
OCT hwWlanBLESourceIPv6Address	1.3.6.1.4.1.2011.6.139.11.1.73.1.26	OCTET STRING	read-write	This object indicates the source IPv6 address for reporting ble location data. You choose an IPv6 address.
I32 hwWlanBLETxPower	1.3.6.1.4.1.2011.6.139.11.1.73.1.3	Integer32	read-write	Description.
hwWlanBranchGroupConfig	1.3.6.1.4.1.2011.6.139.11.1.88
U32 hwWlanCfgHsbGroupId	1.3.6.1.4.1.2011.6.139.11.1.1.13.2	Unsigned32	read-write	This object indicates the HSB group ID. If the HSB type is set to Disable, the ID is 0xFFFFFFFF.
INT hwWlanCfgHsbServiceType	1.3.6.1.4.1.2011.6.139.11.1.1.13.1	INTEGER	read-write	This object indicates the HSB type. The default value is 1.
U32 hwWlanCfgHsbTunnelId	1.3.6.1.4.1.2011.6.139.11.1.1.13.3	Unsigned32	read-write	This object indicates the ID of the HSB channel. If the HSB type is set to Disable, the ID is 0xFFFFFFFF.
U32 hwWlanClusterACIndex	1.3.6.1.4.1.2011.6.139.11.1.83.6.1.1	Unsigned32	not-accessible	This object indicates the index of hwWlanClusterACListInfo.
IP hwWlanClusterACIPv4	1.3.6.1.4.1.2011.6.139.11.1.83.6.1.2	IpAddress	read-only	This object indicates the ipv4 address of the ac.
OCT hwWlanClusterACIPv6	1.3.6.1.4.1.2011.6.139.11.1.83.6.1.3	OCTET STRING	read-only	This object indicates the ipv6 address of the ac.
OCT hwWlanClusterACLastSynTime	1.3.6.1.4.1.2011.6.139.11.1.83.6.1.8	OCTET STRING	read-only	This object indicates the last synchronize time of the ac.
hwWlanClusterACListInfoEntry	1.3.6.1.4.1.2011.6.139.11.1.83.6.1		not-accessible	This table has no index.
hwWlanClusterACListInfoTable	1.3.6.1.4.1.2011.6.139.11.1.83.6		not-accessible	This table describes the ac information.
INT hwWlanClusterACRole	1.3.6.1.4.1.2011.6.139.11.1.83.6.1.4	INTEGER	read-only	This object indicates the role of the ac.
INT hwWlanClusterACStatus	1.3.6.1.4.1.2011.6.139.11.1.83.6.1.7	INTEGER	read-only	This object indicates the status of the ac.
OCT hwWlanClusterACType	1.3.6.1.4.1.2011.6.139.11.1.83.6.1.5	OCTET STRING	read-only	This object indicates the type of the ac.
OCT hwWlanClusterACVersion	1.3.6.1.4.1.2011.6.139.11.1.83.6.1.6	OCTET STRING	read-only	This object indicates the version of the ac.
hwWlanClusterConfig	1.3.6.1.4.1.2011.6.139.11.1.83
IP hwWlanClusterLocalIPv4Address	1.3.6.1.4.1.2011.6.139.11.1.83.3.1.1	IpAddress	not-accessible	This object indicates the IPv4 address of the local controller.
hwWlanClusterLocalIPv4Entry	1.3.6.1.4.1.2011.6.139.11.1.83.3.1		not-accessible	This table has no index.
OCT hwWlanClusterLocalIPv4Psk	1.3.6.1.4.1.2011.6.139.11.1.83.3.1.2	OCTET STRING	read-write	This object indicates the psk of the local controller.
ROW hwWlanClusterLocalIPv4RowStatus	1.3.6.1.4.1.2011.6.139.11.1.83.3.1.3	RowStatus	read-write	This object indicates the row status.
hwWlanClusterLocalIPv4Table	1.3.6.1.4.1.2011.6.139.11.1.83.3		not-accessible	This table describes the configuration of the local controller.
OCT hwWlanClusterLocalIPv6Address	1.3.6.1.4.1.2011.6.139.11.1.83.4.1.1	OCTET STRING	not-accessible	This object indicates the IPv6 address of the local controller.
hwWlanClusterLocalIPv6Entry	1.3.6.1.4.1.2011.6.139.11.1.83.4.1		not-accessible	This table has no index.
OCT hwWlanClusterLocalIPv6Psk	1.3.6.1.4.1.2011.6.139.11.1.83.4.1.2	OCTET STRING	read-write	This object indicates the psk of the local controller.
ROW hwWlanClusterLocalIPv6RowStatus	1.3.6.1.4.1.2011.6.139.11.1.83.4.1.3	RowStatus	read-write	This object indicates the row status.
hwWlanClusterLocalIPv6Table	1.3.6.1.4.1.2011.6.139.11.1.83.4		not-accessible	This table describes the configuration of the local controller.
hwWlanClusterMasterConfig	1.3.6.1.4.1.2011.6.139.11.1.83.1
IP hwWlanClusterMasterIPv4Address	1.3.6.1.4.1.2011.6.139.11.1.83.1.1	IpAddress	read-write	This object indicates the IPv4 address of the master controller.
OCT hwWlanClusterMasterIPv6Address	1.3.6.1.4.1.2011.6.139.11.1.83.1.2	OCTET STRING	read-write	This object indicates the IPv6 address of the master controller.
OCT hwWlanClusterPsk	1.3.6.1.4.1.2011.6.139.11.1.83.1.3	OCTET STRING	read-write	This object indicates the psk of the master controller.
hwWlanClusterRedundancyConfig	1.3.6.1.4.1.2011.6.139.11.1.83.2
IP hwWlanClusterRedundancyLocalIPv4Address	1.3.6.1.4.1.2011.6.139.11.1.83.2.1	IpAddress	read-write	This object indicates the IPv4 address of the local ac.
OCT hwWlanClusterRedundancyLocalIPv6Address	1.3.6.1.4.1.2011.6.139.11.1.83.2.2	OCTET STRING	read-write	This object indicates the IPv6 address of the local ac.
IP hwWlanClusterRedundancyPeerIPv4Address	1.3.6.1.4.1.2011.6.139.11.1.83.2.3	IpAddress	read-write	This object indicates the IPv4 address of the peer ac.
OCT hwWlanClusterRedundancyPeerIPv6Address	1.3.6.1.4.1.2011.6.139.11.1.83.2.4	OCTET STRING	read-write	This object indicates the IPv6 address of the peer ac.
OCT hwWlanClusterRedundancyPsk	1.3.6.1.4.1.2011.6.139.11.1.83.2.7	OCTET STRING	read-write	This object indicates the psk of the redundancy ac.
I32 hwWlanClusterRedundancyTrackInterface	1.3.6.1.4.1.2011.6.139.11.1.83.2.6	Integer32	read-write	This object indicates the interface index.
I32 hwWlanClusterRedundancyTrackVRRPID	1.3.6.1.4.1.2011.6.139.11.1.83.2.5	Integer32	read-write	This object indicates the vrrp id.
INT hwWlanClusterRedundancyTrackVRRPType	1.3.6.1.4.1.2011.6.139.11.1.83.2.8	INTEGER	read-write	This object indicates the information about the track VRRP type.
hwWlanClusterSynConfig	1.3.6.1.4.1.2011.6.139.11.1.83.5
INT hwWlanClusterSynConfigScheduleEnable	1.3.6.1.4.1.2011.6.139.11.1.83.5.4	INTEGER	read-write	This object indicates to the switch of scheduled synchronize configuration.
I32 hwWlanClusterSynConfigScheduleInterval	1.3.6.1.4.1.2011.6.139.11.1.83.5.6	Integer32	read-write	This object indicates the interval of scheduled synchronize configuration. It is expressed in minutes. The default value is 1440.
OCT hwWlanClusterSynConfigScheduleTime	1.3.6.1.4.1.2011.6.139.11.1.83.5.5	OCTET STRING	read-write	This object indicates the scheduled synchronize configuration time.
INT hwWlanClusterSynConfigurationOper	1.3.6.1.4.1.2011.6.139.11.1.83.5.3	INTEGER	read-write	This object indicates to synchronize configuration. It is write only.
IP hwWlanClusterSynIPv4Address	1.3.6.1.4.1.2011.6.139.11.1.83.5.1	IpAddress	read-write	This object indicates the Ipv4 address of the synchronize-configuration.
OCT hwWlanClusterSynIPv6Address	1.3.6.1.4.1.2011.6.139.11.1.83.5.2	OCTET STRING	read-write	This object indicates the Ipv6 address of the synchronize-configuration.
MAC hwWlanCommitApMac	1.3.6.1.4.1.2011.6.139.11.1.1.14.1.1	MacAddress	not-accessible	Description.
hwWlanCommitEntry	1.3.6.1.4.1.2011.6.139.11.1.1.14.1		not-accessible	Description.
hwWlanCommitTable	1.3.6.1.4.1.2011.6.139.11.1.1.14		not-accessible	Description.
hwWlanConfig	1.3.6.1.4.1.2011.6.139.11			V3.36 modify the node descriptions.
I32 hwWlanConfigCommit	1.3.6.1.4.1.2011.6.139.11.1.1.14.1.2	Integer32	read-write	Description.
I32 hwWlanConfigCommitAll	1.3.6.1.4.1.2011.6.139.11.1.1.11	Integer32	read-write	Description.
hwWlanConfigCompliance	1.3.6.1.4.1.2011.6.139.11.2.1.1			Description.
hwWlanConfigCompliances	1.3.6.1.4.1.2011.6.139.11.2.1
hwWlanConfigConformance	1.3.6.1.4.1.2011.6.139.11.2
hwWlanConfigObjectGroups	1.3.6.1.4.1.2011.6.139.11.2.2
hwWlanConfigObjects	1.3.6.1.4.1.2011.6.139.11.1
IP hwWlanConnectMasterControllerIPv4Addr	1.3.6.1.4.1.2011.6.139.11.1.58.1.3	IpAddress	read-write	This object indicates the IPv4 address of the CUC that needs to set up a link with the Master Controller.
OCT hwWlanConnectMasterControllerIPv6Addr	1.3.6.1.4.1.2011.6.139.11.1.58.1.4	OCTET STRING	read-write	This object indicates the IPv6 address of the CUC that needs to set up a link with the Master Controller.
INT hwWlanConnectMasterControllerSwitch	1.3.6.1.4.1.2011.6.139.11.1.58.1.2	INTEGER	read-write	This objection indicates the status of the connection between the AC and Master Controller. The establishment of connection between the AC and Master Controller requires the IP address of the Master Controller. The default value is disconnect(1).
OCT hwWlanCountryCode	1.3.6.1.4.1.2011.6.139.11.1.66.1.1	OCTET STRING	not-accessible	Description.
OCT hwWlanCountryCodeAvailableChannelSet2gBW20	1.3.6.1.4.1.2011.6.139.11.1.66.1.3	OCTET STRING	read-only	Description.
OCT hwWlanCountryCodeAvailableChannelSet2gBW40Minus	1.3.6.1.4.1.2011.6.139.11.1.66.1.5	OCTET STRING	read-only	Description.
OCT hwWlanCountryCodeAvailableChannelSet2gBW40Plus	1.3.6.1.4.1.2011.6.139.11.1.66.1.4	OCTET STRING	read-only	Description.
OCT hwWlanCountryCodeAvailableChannelSet5gBW160	1.3.6.1.4.1.2011.6.139.11.1.66.1.10	OCTET STRING	read-only	Description.
OCT hwWlanCountryCodeAvailableChannelSet5gBW20	1.3.6.1.4.1.2011.6.139.11.1.66.1.6	OCTET STRING	read-only	Description.
OCT hwWlanCountryCodeAvailableChannelSet5gBW40Minus	1.3.6.1.4.1.2011.6.139.11.1.66.1.8	OCTET STRING	read-only	Description.
OCT hwWlanCountryCodeAvailableChannelSet5gBW40Plus	1.3.6.1.4.1.2011.6.139.11.1.66.1.7	OCTET STRING	read-only	Description.
OCT hwWlanCountryCodeAvailableChannelSet5gBW80	1.3.6.1.4.1.2011.6.139.11.1.66.1.9	OCTET STRING	read-only	Description.
OCT hwWlanCountryCodeEngDescription	1.3.6.1.4.1.2011.6.139.11.1.66.1.2	OCTET STRING	read-only	Description.
hwWlanCountryCodeEntry	1.3.6.1.4.1.2011.6.139.11.1.66.1		not-accessible	Description.
hwWlanCountryCodeGroups	1.3.6.1.4.1.2011.6.139.11.2.2.59			Description.
hwWlanCountryCodeTable	1.3.6.1.4.1.2011.6.139.11.1.66		not-accessible	Description.
IP hwWlanGlobalAeroscoutLocalIPv4	1.3.6.1.4.1.2011.6.139.11.1.1.35	IpAddress	read-write	This object indicates the aeroscout local IPv4 address for receiving message from aeroscout server.
OCT hwWlanGlobalAeroscoutLocalIPv6	1.3.6.1.4.1.2011.6.139.11.1.1.36	OCTET STRING	read-write	This object indicates the aeroscout local IPv6 address for receiving message from aeroscout server.
INT hwWlanGlobalAntiInterferencePerPacketTpcSwitch	1.3.6.1.4.1.2011.6.139.11.1.1.34	INTEGER	read-write	This object indicates the status of anti-interference per-packet-TPC switch. The default value is 2. 1: disable 2: enable.
INT hwWlanGlobalAntiInterferenceSwitch	1.3.6.1.4.1.2011.6.139.11.1.1.33	INTEGER	read-write	This object indicates the status of anti-interference switch. The default value is 2. 1: disable 2: enable.
INT hwWlanGlobalApLldpSwitch	1.3.6.1.4.1.2011.6.139.11.1.1.4	INTEGER	read-write	This object indicates the status of the global LLDP function. The default value is 2.
OCT hwWlanGlobalApLoadRtuFileName	1.3.6.1.4.1.2011.6.139.11.1.1.37	OCTET STRING	read-write	This object indicates the AP RTU load file name.
OCT hwWlanGlobalApPassword	1.3.6.1.4.1.2011.6.139.11.1.1.2	OCTET STRING	read-write	This object indicates passwords for Telnet-based login to APs.
OCT hwWlanGlobalApUsername	1.3.6.1.4.1.2011.6.139.11.1.1.1	OCTET STRING	read-write	This object indicates user names for Telnet-based login to APs.
IP hwWlanGlobalBleSourceIPAddress	1.3.6.1.4.1.2011.6.139.11.1.1.26	IpAddress	read-write	This object indicates the global source IPv4 address for reporting ble location data. You choose an IPv4 address.
OCT hwWlanGlobalBleSourceIPv6Address	1.3.6.1.4.1.2011.6.139.11.1.1.27	OCTET STRING	read-write	This object indicates the global source IPv6 address for reporting ble location data. You choose an IPv6 address.
hwWlanGlobalConfig	1.3.6.1.4.1.2011.6.139.11.1.1
hwWlanGlobalConfigGroups	1.3.6.1.4.1.2011.6.139.11.2.2.1			Description.
INT hwWlanGlobalIpv6Enable	1.3.6.1.4.1.2011.6.139.11.1.1.5	INTEGER	read-write	This object indicates the status of the global IPv6 function. The default value is 1.
IP hwWlanGlobalLocationSourceIPAddress	1.3.6.1.4.1.2011.6.139.11.1.1.20	IpAddress	read-write	This object indicates the global source IPv4 address for reporting location data in AeroScout or Ekahau location mode. You choose an IPv4 or IPv6 address.
OCT hwWlanGlobalLocationSourceIPv6Address	1.3.6.1.4.1.2011.6.139.11.1.1.21	OCTET STRING	read-write	This object indicates the global source IPv6 address for reporting location data in AeroScout or Ekahau location mode. You choose an IPv4 or IPv6 address.
INT hwWlanGlobalRogueDeviceLogSwitch	1.3.6.1.4.1.2011.6.139.11.1.1.30	INTEGER	read-write	This object indicates the status of rogue device log switch. The default value is 1. 1: disable 2: enable.
IP hwWlanGlobalSpectrumAnalysisSourceIPAddress	1.3.6.1.4.1.2011.6.139.11.1.1.24	IpAddress	read-write	This object indicates the spectrum-analysis source IPv4 address for reporting spectrum-analysis data in spectrum-analysis server. You choose an IPv4 or IPv6 address.
OCT hwWlanGlobalSpectrumAnalysisSourceIPv6Address	1.3.6.1.4.1.2011.6.139.11.1.1.25	OCTET STRING	read-write	This object indicates the spectrum-analysis source IPv6 address for reporting spectrum-analysis data in spectrum-analysis server. You choose an IPv4 or IPv6 address.
U32 hwWlanIDIndexedAPSpApId	1.3.6.1.4.1.2011.6.139.11.1.69.1.1	Unsigned32	not-accessible	This object indicates the AP ID.
MAC hwWlanIDIndexedAPSpApMac	1.3.6.1.4.1.2011.6.139.11.1.69.1.4	MacAddress	read-write	This object indicates the MAC address of an AP.
OCT hwWlanIDIndexedAPSpAPSystemProfile	1.3.6.1.4.1.2011.6.139.11.1.69.1.2	OCTET STRING	read-write	This object indicates the system profile bound to the AP specific profile.
OCT hwWlanIDIndexedAPSpApTypeInfo	1.3.6.1.4.1.2011.6.139.11.1.69.1.5	OCTET STRING	read-write	This object indicates the domain profile bound to the AP specific profile.
OCT hwWlanIDIndexedAPSpBleProfile	1.3.6.1.4.1.2011.6.139.11.1.69.1.8	OCTET STRING	read-write	Description.
OCT hwWlanIDIndexedAPSpDomainName	1.3.6.1.4.1.2011.6.139.11.1.69.1.24	OCTET STRING	read-write	This object indicates the domain name.
OCT hwWlanIDIndexedAPSpDomainProfile	1.3.6.1.4.1.2011.6.139.11.1.69.1.3	OCTET STRING	read-write	This object indicates the domain profile bound to the AP specific profile.
hwWlanIDIndexedAPSpecificEntry	1.3.6.1.4.1.2011.6.139.11.1.69.1		not-accessible	The index of this table is hwWlanIDIndexedAPSpApId.
hwWlanIDIndexedAPSpecificTable	1.3.6.1.4.1.2011.6.139.11.1.69		not-accessible	This table is used to create or delete an AP specific profile and bind an AP system profile, 2G radio profile, or domain profile to it or unbind an AP system profile, 2G radio profile, or domain profile from it.
OCT hwWlanIDIndexedAPSpLatitude	1.3.6.1.4.1.2011.6.139.11.1.69.1.10	OCTET STRING	read-write	This object indicates the latitude.
OCT hwWlanIDIndexedAPSpLocation	1.3.6.1.4.1.2011.6.139.11.1.69.1.22	OCTET STRING	read-write	Description.
OCT hwWlanIDIndexedAPSpLongitude	1.3.6.1.4.1.2011.6.139.11.1.69.1.9	OCTET STRING	read-write	This object indicates the longitude.
ROW hwWlanIDIndexedAPSpRowStatus	1.3.6.1.4.1.2011.6.139.11.1.69.1.7	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.
OCT hwWlanIDIndexedAPSpSiteCode	1.3.6.1.4.1.2011.6.139.11.1.69.1.23	OCTET STRING	read-write	This object indicates the site code.
OCT hwWlanIDIndexedAPSpWidsProfile	1.3.6.1.4.1.2011.6.139.11.1.69.1.6	OCTET STRING	read-write	This object indicates the bound WIDS profile.
INT hwWlanIDIndexedSpApAddressMode	1.3.6.1.4.1.2011.6.139.11.1.69.1.11	INTEGER	read-write	This object indicates the IP address allocation mode.
IP hwWlanIDIndexedSpApIPv4Address	1.3.6.1.4.1.2011.6.139.11.1.69.1.12	IpAddress	read-write	This object indicates the AP's IPv4 address. hwWlanIDIndexedSpApIPv4Address takes effect if hwWlanIDIndexedSpApAddressMode is set to static.
IP hwWlanIDIndexedSpApIPv4Gateway	1.3.6.1.4.1.2011.6.139.11.1.69.1.14	IpAddress	read-write	This object indicates the AP's IPv4 gateway. hwWlanIDIndexedSpApIPv4Gateway takes effect if hwWlanIDIndexedSpApAddressMode is set to static.
IP hwWlanIDIndexedSpApIPv4Mask	1.3.6.1.4.1.2011.6.139.11.1.69.1.13	IpAddress	read-write	This object indicates the AP's IPv4 mask. hwWlanIDIndexedSpApIPv4Mask takes effect if hwWlanIDIndexedSpApAddressMode is set to static.
OCT hwWlanIDIndexedSpApIPv6Address	1.3.6.1.4.1.2011.6.139.11.1.69.1.15	OCTET STRING	read-write	This object indicates the AP's IPv6 address. hwWlanIDIndexedSpApIPv6Address takes effect if hwWlanIDIndexedSpApAddressMode is set to static.
OCT hwWlanIDIndexedSpApIPv6Gateway	1.3.6.1.4.1.2011.6.139.11.1.69.1.17	OCTET STRING	read-write	This object indicates the AP's IPv6 gateway. hwWlanIDIndexedSpApIPv6Gateway takes effect if hwWlanIDIndexedSpApAddressMode is set to static.
U32 hwWlanIDIndexedSpApIPv6PrefixLen	1.3.6.1.4.1.2011.6.139.11.1.69.1.16	Unsigned32	read-write	This object indicates the length of the IPv6 address prefix.
OCT hwWlanIDIndexedSpApName	1.3.6.1.4.1.2011.6.139.11.1.69.1.21	OCTET STRING	read-write	Description.
OCT hwWlanIDIndexedSpBranchGroupName	1.3.6.1.4.1.2011.6.139.11.1.69.1.25	OCTET STRING	read-write	This object indicates the AP branch group name.
OCT hwWlanIDIndexedSpGroupName	1.3.6.1.4.1.2011.6.139.11.1.69.1.20	OCTET STRING	read-write	Description.
OCT hwWlanIDIndexedSpIPv4ACList	1.3.6.1.4.1.2011.6.139.11.1.69.1.18	OCTET STRING	read-write	This object indicates the AC IPv4 address list. NOTE AC lists are separated by question marks (?).A maximum of four AC lists can be configured.
OCT hwWlanIDIndexedSpIPv6ACList	1.3.6.1.4.1.2011.6.139.11.1.69.1.19	OCTET STRING	read-write	This object indicates the AC IPv6 address list. NOTE AC lists are separated by question marks (?).A maximum of four AC lists can be configured.
U32 hwWlanIDIndexedSpManagementVlan	1.3.6.1.4.1.2011.6.139.11.1.69.1.26	Unsigned32	read-write	This object indicates the AP management vlan.
U32 hwWlanIotOperateCardId	1.3.6.1.4.1.2011.6.139.11.1.1.32.1.1	Unsigned32	not-accessible	This object indicates the AP card ID.
hwWlanIotOperateEntry	1.3.6.1.4.1.2011.6.139.11.1.1.32.1		not-accessible	Description.
hwWlanIotOperateTable	1.3.6.1.4.1.2011.6.139.11.1.1.32		not-accessible	Description.
INT hwWlanIotOperateType	1.3.6.1.4.1.2011.6.139.11.1.1.32.1.2	INTEGER	read-write	This object indicates the operation type to the IOT card of the AP.
OCT hwWlanLanguageCode	1.3.6.1.4.1.2011.6.139.11.1.59.1.1	OCTET STRING	not-accessible	This object indicates the language code.
OCT hwWlanLanguageCodeDescription	1.3.6.1.4.1.2011.6.139.11.1.59.1.2	OCTET STRING	read-only	This object indicates the description of language codes.
hwWlanLanguageCodeEntry	1.3.6.1.4.1.2011.6.139.11.1.59.1		not-accessible	The index of this table is hwWlanLanguageCode.
hwWlanLanguageCodeTable	1.3.6.1.4.1.2011.6.139.11.1.59		not-accessible	It is the language code table. It complies with ISO 639 and is used by hotspot networks to obtain language code information.
hwWlanLanguageGroups	1.3.6.1.4.1.2011.6.139.11.2.2.53			Description.
U32 hwWlanLBBtmFailTime	1.3.6.1.4.1.2011.6.139.11.1.64.1.12	Unsigned32	read-write	This object indicates the number of attempts to steer STAs in BTM mode. The default value is 5.
U32 hwWlanLBChUtilGapThreshold	1.3.6.1.4.1.2011.6.139.11.1.64.1.8	Unsigned32	read-write	This object indicates the load difference threshold of a static load balancing group in channel-utilization mode.
U32 hwWlanLBChUtilStartThreshold	1.3.6.1.4.1.2011.6.139.11.1.64.1.9	Unsigned32	read-write	This object indicates the start threshold for load balancing in a static load balancing group in channel-utilization mode.
U32 hwWlanLBDeauthFailTime	1.3.6.1.4.1.2011.6.139.11.1.64.1.11	Unsigned32	read-write	This object indicates the number of attempts to steer STAs in Deauthentication mode. The default value is 0.
U32 hwWlanLBDenyThreshold	1.3.6.1.4.1.2011.6.139.11.1.64.1.3	Unsigned32	read-write	This object indicates the maximum number of times an AP rejects association requests of a STA in the static load balancing group.
I32 hwWlanLBGapStaNumThreshold	1.3.6.1.4.1.2011.6.139.11.1.64.1.10	Integer32	read-write	This object indicates the load difference threshold for static load balancing based on the number of STAs. The value 0 indicates that load balancing is based on the percentage of STAs.
U32 hwWlanLBGapThreshold	1.3.6.1.4.1.2011.6.139.11.1.64.1.2	Unsigned32	read-write	This object indicates the load difference threshold of a static load balancing group.
OCT hwWlanLBGroupName	1.3.6.1.4.1.2011.6.139.11.1.64.1.1	OCTET STRING	not-accessible	This object indicates the name of the static load balancing group.
ROW hwWlanLBGroupRowStatus	1.3.6.1.4.1.2011.6.139.11.1.64.1.6	RowStatus	read-write	This object indicates the row status of this table, which can be createAndGo(4) or destroy(6).
U32 hwWlanLBGroupStatus	1.3.6.1.4.1.2011.6.139.11.1.64.1.5	Unsigned32	read-only	This object indicates the load balancing status in the static load balancing group.1: Load is not balanced.2: Load is balanced.
ROW hwWlanLBMemberRowStatus	1.3.6.1.4.1.2011.6.139.11.1.65.1.1	RowStatus	read-write	This object indicates the row status of this table.
INT hwWlanLBMode	1.3.6.1.4.1.2011.6.139.11.1.64.1.7	INTEGER	read-write	This object indicates the mode for load balancing in a static load balancing group.
U32 hwWlanLBRssiDiffGap	1.3.6.1.4.1.2011.6.139.11.1.64.1.17	Unsigned32	read-write	This object indicates the threshold of the RSSI gap between the associated radio and target radio. The default value is 5, in dB.
I32 hwWlanLBRssiThreshold	1.3.6.1.4.1.2011.6.139.11.1.64.1.16	Integer32	read-write	This object indicates the lower threshold of the target radio RSSI. The default value is -65, in dBm.
U32 hwWlanLBStartThreshold	1.3.6.1.4.1.2011.6.139.11.1.64.1.4	Unsigned32	read-write	This object indicates the start threshold for load balancing in a static load balancing group.
U32 hwWlanLBSteerAuthRestrictThreshold	1.3.6.1.4.1.2011.6.139.11.1.64.1.15	Unsigned32	read-write	This object indicates the number of times non-target APs suppress STA Authentication frames during STA steering. The default value is 0.
U32 hwWlanLBSteerProbeRestrictThreshold	1.3.6.1.4.1.2011.6.139.11.1.64.1.14	Unsigned32	read-write	This object indicates the number of times non-target APs suppress STA Probe frames during STA steering. The default value is 5.
U32 hwWlanLBSteerRestrictTime	1.3.6.1.4.1.2011.6.139.11.1.64.1.13	Unsigned32	read-write	This object indicates the time for suppressing STA association with non-target APs during STA steering. The default value is 5, in seconds.
IP hwWlanLicenseCentralizedClientIPv4Addr	1.3.6.1.4.1.2011.6.139.11.1.1.29.1.4	IpAddress	read-write	This object indicates the ipv4 address of license centralized client.
OCT hwWlanLicenseCentralizedClientIPv6Addr	1.3.6.1.4.1.2011.6.139.11.1.1.29.1.5	OCTET STRING	read-write	This object indicates the ipv6 address of license centralized client.
hwWlanLicenseCentralizedEntry	1.3.6.1.4.1.2011.6.139.11.1.94.1		not-accessible	The indexes of this table is hwWlanLicenseClientMac.
hwWlanLicenseCentralizedGlobal	1.3.6.1.4.1.2011.6.139.11.1.1.29.1
hwWlanLicenseCentralizedManagement	1.3.6.1.4.1.2011.6.139.11.1.1.29
INT hwWlanLicenseCentralizedRole	1.3.6.1.4.1.2011.6.139.11.1.1.29.1.6	INTEGER	read-only	This object indicates the current role of license centralized device.
IP hwWlanLicenseCentralizedServerIPv4Addr	1.3.6.1.4.1.2011.6.139.11.1.1.29.1.2	IpAddress	read-write	This object indicates the ipv4 address of license centralized server.
OCT hwWlanLicenseCentralizedServerIPv6Addr	1.3.6.1.4.1.2011.6.139.11.1.1.29.1.3	OCTET STRING	read-write	This object indicates the ipv6 address of license centralized server.
INT hwWlanLicenseCentralizedSwitch	1.3.6.1.4.1.2011.6.139.11.1.1.29.1.1	INTEGER	read-write	This object indicates the swtich of license centralized. The default value is 1.
hwWlanLicenseCentralizedTable	1.3.6.1.4.1.2011.6.139.11.1.94		not-accessible	This table is used to get the information of license pool.
U32 hwWlanLicenseClientAllocedLicense	1.3.6.1.4.1.2011.6.139.11.1.94.1.8	Unsigned32	read-only	This object indicates the alloced license of license client.
IP hwWlanLicenseClientIPv4Addr	1.3.6.1.4.1.2011.6.139.11.1.94.1.2	IpAddress	read-only	This object indicates the ipv4 address of license client.
OCT hwWlanLicenseClientIPv6Addr	1.3.6.1.4.1.2011.6.139.11.1.94.1.3	OCTET STRING	read-only	This object indicates the ipv6 address of license client.
U32 hwWlanLicenseClientLicenseRemain	1.3.6.1.4.1.2011.6.139.11.1.94.1.7	Unsigned32	read-only	This object indicates the remain days of license client.
U32 hwWlanLicenseClientLocalLicense	1.3.6.1.4.1.2011.6.139.11.1.94.1.6	Unsigned32	read-only	This object indicates the number of local license in license client.
MAC hwWlanLicenseClientMac	1.3.6.1.4.1.2011.6.139.11.1.94.1.1	MacAddress	not-accessible	This object indicates the mac-address of license centralized client.
INT hwWlanLicenseClientRole	1.3.6.1.4.1.2011.6.139.11.1.94.1.4	INTEGER	read-only	This object indicates the current role of license client.
INT hwWlanLicenseClientState	1.3.6.1.4.1.2011.6.139.11.1.94.1.5	INTEGER	read-only	This object indicates the state of license client.
I32 hwWlanLicensePoolTotal	1.3.6.1.4.1.2011.6.139.11.1.1.29.1.8	Integer32	read-only	This object indicates the total number of license pool.
I32 hwWlanLicensePoolUsed	1.3.6.1.4.1.2011.6.139.11.1.1.29.1.7	Integer32	read-only	This object indicates the used of license in license pool.
hwWlanLoadBalanceStaticGroupEntry	1.3.6.1.4.1.2011.6.139.11.1.64.1		not-accessible	The index of this table is hwWlanLBGroupName.
hwWlanLoadBalanceStaticGroupGroups	1.3.6.1.4.1.2011.6.139.11.2.2.57			Description.
hwWlanLoadBalanceStaticGroupMemberEntry	1.3.6.1.4.1.2011.6.139.11.1.65.1		not-accessible	The indexes of this table are hwWlanLBGroupName, hwWlanApName, and hwWlanRadioID.
hwWlanLoadBalanceStaticGroupMemberGroups	1.3.6.1.4.1.2011.6.139.11.2.2.58			Description.
hwWlanLoadBalanceStaticGroupMemberTable	1.3.6.1.4.1.2011.6.139.11.1.65		not-accessible	This table records information about members in the static load balancing group.
hwWlanLoadBalanceStaticGroupTable	1.3.6.1.4.1.2011.6.139.11.1.64		not-accessible	This table records information about the static load balancing group.
hwWlanManualContainListEntry	1.3.6.1.4.1.2011.6.139.11.1.1.28.1		not-accessible	Description.
MAC hwWlanManualContainListMac	1.3.6.1.4.1.2011.6.139.11.1.1.28.1.1	MacAddress	not-accessible	Description.
ROW hwWlanManualContainListRowStatus	1.3.6.1.4.1.2011.6.139.11.1.1.28.1.2	RowStatus	read-write	Description.
hwWlanManualContainListTable	1.3.6.1.4.1.2011.6.139.11.1.1.28		not-accessible	Description.
INT hwWlanMasterControllerSwitch	1.3.6.1.4.1.2011.6.139.11.1.58.1.1	INTEGER	read-write	This object indicates the status of the CUC function. The default value is disable (1).
I32 hwWlanMemAcIndex	1.3.6.1.4.1.2011.6.139.11.1.58.2.1.1	Integer32	not-accessible	This object indicates the AP ID.
U32 hwWlanMeshClientEdcaBeAIFSN	1.3.6.1.4.1.2011.6.139.11.1.36.1.23	Unsigned32	read-write	This object indicates the AIFSN for AC_BE packets, which determines the channel idle time.
U32 hwWlanMeshClientEdcaBeECWmax	1.3.6.1.4.1.2011.6.139.11.1.36.1.21	Unsigned32	read-write	This object indicates the exponent form of the maximum contention window (ECWmax) for AC_BE packets. ECWmin and ECWmax determine the average backoff time.
U32 hwWlanMeshClientEdcaBeECWmin	1.3.6.1.4.1.2011.6.139.11.1.36.1.22	Unsigned32	read-write	This object indicates the exponent form of the minimum contention window (ECWmin) for AC_BE packets. ECWmin and ECWmax determine the average backoff time.
U32 hwWlanMeshClientEdcaBeTXOPLimit	1.3.6.1.4.1.2011.6.139.11.1.36.1.24	Unsigned32	read-write	This object indicates the transmission opportunity limit (TXOPLimit) for AC_BE packets, which determines the maximum duration in which an STA can occupy a channel. A larger TXOPLimit value indicates a longer duration to occupy a channel.
U32 hwWlanMeshClientEdcaBkAIFSN	1.3.6.1.4.1.2011.6.139.11.1.36.1.27	Unsigned32	read-write	This object indicates the AIFSN for AC_BK packets, which determines the channel idle time.
U32 hwWlanMeshClientEdcaBkECWmax	1.3.6.1.4.1.2011.6.139.11.1.36.1.25	Unsigned32	read-write	This object indicates the exponent form of the maximum contention window (ECWmax) for AC_BK packets. ECWmin and ECWmax determine the average backoff time.
U32 hwWlanMeshClientEdcaBkECWmin	1.3.6.1.4.1.2011.6.139.11.1.36.1.26	Unsigned32	read-write	This object indicates the exponent form of the minimum contention window (ECWmin) for AC_BK packets. ECWmin and ECWmax determine the average backoff time.
U32 hwWlanMeshClientEdcaBkTXOPLimit	1.3.6.1.4.1.2011.6.139.11.1.36.1.28	Unsigned32	read-write	This object indicates the transmission opportunity limit (TXOPLimit) for AC_BK packets, which determines the maximum duration in which an STA can occupy a channel. A larger TXOPLimit value indicates a longer duration to occupy a channel.
U32 hwWlanMeshClientEdcaVideoAIFSN	1.3.6.1.4.1.2011.6.139.11.1.36.1.19	Unsigned32	read-write	This object indicates the AIFSN for AC_VI packets, which determines the channel idle time.
U32 hwWlanMeshClientEdcaVideoECWmax	1.3.6.1.4.1.2011.6.139.11.1.36.1.17	Unsigned32	read-write	This object indicates the exponent form of the maximum contention window (ECWmax) for AC_VI packets. ECWmin and ECWmax determine the average backoff time.
U32 hwWlanMeshClientEdcaVideoECWmin	1.3.6.1.4.1.2011.6.139.11.1.36.1.18	Unsigned32	read-write	This object indicates the exponent form of the minimum contention window (ECWmin) for AC_VI packets. ECWmin and ECWmax determine the average backoff time.
U32 hwWlanMeshClientEdcaVideoTXOPLimit	1.3.6.1.4.1.2011.6.139.11.1.36.1.20	Unsigned32	read-write	This object indicates the transmission opportunity limit (TXOPLimit) for AC_VI packets, which determines the maximum duration in which an STA can occupy a channel. A larger TXOPLimit value indicates a longer duration to occupy a channel.
U32 hwWlanMeshClientEdcaVoiceAIFSN	1.3.6.1.4.1.2011.6.139.11.1.36.1.15	Unsigned32	read-write	This object indicates the AIFSN for AC_VO packets, which determines the channel idle time.
U32 hwWlanMeshClientEdcaVoiceECWmax	1.3.6.1.4.1.2011.6.139.11.1.36.1.13	Unsigned32	read-write	This object indicates the exponent form of the maximum contention window (ECWmax) for AC_VO packets. ECWmin and ECWmax determine the average backoff time.
U32 hwWlanMeshClientEdcaVoiceECWmin	1.3.6.1.4.1.2011.6.139.11.1.36.1.14	Unsigned32	read-write	This object indicates the exponent form of the minimum contention window (ECWmin) for AC_VO packets. ECWmin and ECWmax determine the average backoff time.
U32 hwWlanMeshClientEdcaVoiceTXOPLimit	1.3.6.1.4.1.2011.6.139.11.1.36.1.16	Unsigned32	read-write	This object indicates the transmission opportunity limit (TXOPLimit) for AC_VO packets, which determines the maximum duration in which an STA can occupy a channel. A larger TXOPLimit value indicates a longer duration to occupy a channel.
INT hwWlanMeshDhcpTrustPort	1.3.6.1.4.1.2011.6.139.11.1.36.1.3	INTEGER	read-write	This object indicates whether to enable the DHCP trusted port on an AP. The default value is 2.
INT hwWlanMeshFwaEdcaMode	1.3.6.1.4.1.2011.6.139.11.1.36.1.11	INTEGER	read-write	This object indicates the EDCA mode in FWA mode. The default value is 1.
INT hwWlanMeshFwaSwitch	1.3.6.1.4.1.2011.6.139.11.1.36.1.10	INTEGER	read-write	This object indicates the status of the FWA mode function. The default value is 1.
hwWlanMeshHandoverProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.39.1		not-accessible	The index of this table is hwWlanMeshHandoverProfileName.
OCT hwWlanMeshHandoverProfileName	1.3.6.1.4.1.2011.6.139.11.1.39.1.1	OCTET STRING	not-accessible	This object indicates the name of a mesh profile. It is the index of the table.
ROW hwWlanMeshHandoverProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.39.1.15	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
hwWlanMeshHandoverProfileTable	1.3.6.1.4.1.2011.6.139.11.1.39		not-accessible	This table is used to configure and query Mesh handover profile parameters.
U32 hwWlanMeshHOLinkHoldPeriod	1.3.6.1.4.1.2011.6.139.11.1.39.1.5	Unsigned32	read-write	Description.
U32 hwWlanMeshHOLinkProbeInterval	1.3.6.1.4.1.2011.6.139.11.1.39.1.2	Unsigned32	read-write	Description.
INT hwWlanMeshHOLocationBasedAlgorithmEnable	1.3.6.1.4.1.2011.6.139.11.1.39.1.7	INTEGER	read-write	Description.
I32 hwWlanMeshHOMaxRssiThreshold	1.3.6.1.4.1.2011.6.139.11.1.39.1.4	Integer32	read-write	Description.
I32 hwWlanMeshHOMinRssiThreshold	1.3.6.1.4.1.2011.6.139.11.1.39.1.3	Integer32	read-write	Description.
INT hwWlanMeshHOMovingDirection	1.3.6.1.4.1.2011.6.139.11.1.39.1.8	INTEGER	read-write	Description.
U32 hwWlanMeshHOPNCriteriaObserveTime	1.3.6.1.4.1.2011.6.139.11.1.39.1.9	Unsigned32	read-write	Description.
U32 hwWlanMeshHOPNCriteriaQualifyTime	1.3.6.1.4.1.2011.6.139.11.1.39.1.10	Unsigned32	read-write	Description.
U32 hwWlanMeshHORssiMargin	1.3.6.1.4.1.2011.6.139.11.1.39.1.6	Unsigned32	read-write	Description.
OCT hwWlanMeshID	1.3.6.1.4.1.2011.6.139.11.1.36.1.2	OCTET STRING	read-write	This object indicates the mesh ID. The value is a string of case-sensitive characters without question marks (and spaces. It cannot begin or end with double quotation marks. The default value is huaweimesh.
U32 hwWlanMeshLinkAgingTime	1.3.6.1.4.1.2011.6.139.11.1.36.1.30	Unsigned32	read-write	This object indicates the mesh aging time.
U32 hwWlanMeshLinkReportInterval	1.3.6.1.4.1.2011.6.139.11.1.36.1.4	Unsigned32	read-write	This object indicates the interval for reporting mesh link information. The default value is 30 seconds.
U32 hwWlanMeshMaxLinkNum	1.3.6.1.4.1.2011.6.139.11.1.36.1.5	Unsigned32	read-write	In FWA mode, the maximum number of Mesh links supported is 32,otherwise, it is 8
INT hwWlanMeshNdTrustPort	1.3.6.1.4.1.2011.6.139.11.1.36.1.29	INTEGER	read-write	This object indicates whether to enable the ND trusted port on an AP. The default value is 2.
INT hwWlanMeshProfileBeacon2gRate	1.3.6.1.4.1.2011.6.139.11.1.36.1.34	INTEGER	read-write	This object indicates the mesh 2g beacon rate. The default value is 1.
INT hwWlanMeshProfileBeacon5gRate	1.3.6.1.4.1.2011.6.139.11.1.36.1.35	INTEGER	read-write	This object indicates the mesh 5g beacon rate. The default value is 6.
INT hwWlanMeshProfileClientModeSwitch	1.3.6.1.4.1.2011.6.139.11.1.36.1.33	INTEGER	read-write	This object indicates the status of the Mesh client mode function. The default value is 1.
hwWlanMeshProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.36.1		not-accessible	The index of this table is hwWlanMeshProfileName.
OCT hwWlanMeshProfileHandoverProfileName	1.3.6.1.4.1.2011.6.139.11.1.36.1.9	OCTET STRING	read-write	The object indicates the bound handover profile.
OCT hwWlanMeshProfileName	1.3.6.1.4.1.2011.6.139.11.1.36.1.1	OCTET STRING	not-accessible	This object indicates the name of a mesh profile. It is the index of the table.
OCT hwWlanMeshProfilePriorityDscpMap80211e	1.3.6.1.4.1.2011.6.139.11.1.36.1.32	OCTET STRING	read-write	Description.
INT hwWlanMeshProfilePriorityMapTrustMode	1.3.6.1.4.1.2011.6.139.11.1.36.1.31	INTEGER	read-write	Description.
ROW hwWlanMeshProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.36.1.12	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
U32 hwWlanMeshProfileSwitchProbeInterval	1.3.6.1.4.1.2011.6.139.11.1.36.1.36	Unsigned32	read-write	This object indicates the mesh profile switch probe interval. The default value is 60.
hwWlanMeshProfileTable	1.3.6.1.4.1.2011.6.139.11.1.36		not-accessible	This table is used to configure and query Mesh profile parameters.
I32 hwWlanMeshRssiThreshold	1.3.6.1.4.1.2011.6.139.11.1.36.1.6	Integer32	read-write	This object indicates the valid RSSI threshold for a Mesh link route. The default value is -75 dBm.
OCT hwWlanMeshSecurityProfileName	1.3.6.1.4.1.2011.6.139.11.1.36.1.8	OCTET STRING	read-write	The object indicates the bound security profile.
U32 hwWlanMeshUrgentHandoverLowRatePeriod	1.3.6.1.4.1.2011.6.139.11.1.39.1.12	Unsigned32	read-write	Description.
U32 hwWlanMeshUrgentHandoverLowRateThreshold	1.3.6.1.4.1.2011.6.139.11.1.39.1.11	Unsigned32	read-write	Description.
U32 hwWlanMeshUrgentHandoverPunishmentPeriod	1.3.6.1.4.1.2011.6.139.11.1.39.1.13	Unsigned32	read-write	Description.
U32 hwWlanMeshUrgentHandoverPunishmentRssi	1.3.6.1.4.1.2011.6.139.11.1.39.1.14	Unsigned32	read-write	Description.
MAC hwWlanMeshWhitelistPeerApMac	1.3.6.1.4.1.2011.6.139.11.1.38.1.1	MacAddress	not-accessible	This object indicates the whitelist.
hwWlanMeshWhitelistProfileConfigEntry	1.3.6.1.4.1.2011.6.139.11.1.38.1		not-accessible	Indexes of this table are hwWlanMeshWhitelistProfileName and hwWlanMeshWhitelistPeerApMac.
hwWlanMeshWhitelistProfileConfigTable	1.3.6.1.4.1.2011.6.139.11.1.38		not-accessible	This table describes Mesh whitelists in the Mesh whitelist profile.
hwWlanMeshWhitelistProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.37.1		not-accessible	The index of this table is hwWlanMeshWhitelistProfileName.
OCT hwWlanMeshWhitelistProfileName	1.3.6.1.4.1.2011.6.139.11.1.37.1.1	OCTET STRING	not-accessible	This object indicates the name of a mesh profile.
ROW hwWlanMeshWhitelistProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.37.1.2	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
hwWlanMeshWhitelistProfileTable	1.3.6.1.4.1.2011.6.139.11.1.37		not-accessible	This table describes the Mesh whitelist profile.
ROW hwWlanMeshWhitelistRowStatus	1.3.6.1.4.1.2011.6.139.11.1.38.1.2	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
hwWlanMobilityAcEntry	1.3.6.1.4.1.2011.6.139.11.1.58.2.1		not-accessible	The index of this table is hwWlanMemAcIndex.
hwWlanMobilityAcTable	1.3.6.1.4.1.2011.6.139.11.1.58.2		not-accessible	Description.
IP hwWlanMobilityClientIPv4Addr	1.3.6.1.4.1.2011.6.139.11.1.58.7.1.1	IpAddress	read-only	Description.
hwWlanMobilityClientIPv4Entry	1.3.6.1.4.1.2011.6.139.11.1.58.7.1		not-accessible	Description.
INT hwWlanMobilityClientIPv4State	1.3.6.1.4.1.2011.6.139.11.1.58.7.1.2	INTEGER	read-only	Description.
hwWlanMobilityClientIPv4Table	1.3.6.1.4.1.2011.6.139.11.1.58.7		not-accessible	Description.
OCT hwWlanMobilityClientIPv6Addr	1.3.6.1.4.1.2011.6.139.11.1.58.8.1.1	OCTET STRING	read-only	Description.
hwWlanMobilityClientIPv6Entry	1.3.6.1.4.1.2011.6.139.11.1.58.8.1		not-accessible	Description.
INT hwWlanMobilityClientIPv6State	1.3.6.1.4.1.2011.6.139.11.1.58.8.1.2	INTEGER	read-only	Description.
hwWlanMobilityClientIPv6Table	1.3.6.1.4.1.2011.6.139.11.1.58.8		not-accessible	Description.
hwWlanMobilityGroupEntry	1.3.6.1.4.1.2011.6.139.11.1.58.3.1		not-accessible	The index of this table is hwWlanMobilityGroupName.
I32 hwWlanMobilityGroupMemberACIndex	1.3.6.1.4.1.2011.6.139.11.1.58.4.1.1	Integer32	not-accessible	This object indicates mobility group members (AC ID).
hwWlanMobilityGroupMemberEntry	1.3.6.1.4.1.2011.6.139.11.1.58.4.1		not-accessible	Indexes of this table are hwWlanMobilityGroupName and hwWlanMobilityGroupMemberACIndex.
ROW hwWlanMobilityGroupMemberRowStatus	1.3.6.1.4.1.2011.6.139.11.1.58.4.1.2	RowStatus	read-write	This object indicates to add or delete mobility group members.
hwWlanMobilityGroupMemberTable	1.3.6.1.4.1.2011.6.139.11.1.58.4		not-accessible	Description.
OCT hwWlanMobilityGroupName	1.3.6.1.4.1.2011.6.139.11.1.58.3.1.1	OCTET STRING	not-accessible	This object indicates the mobility group name.
ROW hwWlanMobilityGroupRowStatus	1.3.6.1.4.1.2011.6.139.11.1.58.3.1.2	RowStatus	read-write	This object indicates to add or delete mobility groups.
hwWlanMobilityGroups	1.3.6.1.4.1.2011.6.139.11.2.2.52			Description.
hwWlanMobilityGroupTable	1.3.6.1.4.1.2011.6.139.11.1.58.3		not-accessible	Description.
hwWlanMobilityManagement	1.3.6.1.4.1.2011.6.139.11.1.58.1
IP hwWlanMobilityMemberIPv4Addr	1.3.6.1.4.1.2011.6.139.11.1.58.5.1.1	IpAddress	read-write	Description.
OCT hwWlanMobilityMemberIPv4Description	1.3.6.1.4.1.2011.6.139.11.1.58.5.1.2	OCTET STRING	read-write	Description.
hwWlanMobilityMemberIPv4Entry	1.3.6.1.4.1.2011.6.139.11.1.58.5.1		not-accessible	Description.
ROW hwWlanMobilityMemberIPv4RowStatus	1.3.6.1.4.1.2011.6.139.11.1.58.5.1.4	RowStatus	read-write	Description.
INT hwWlanMobilityMemberIPv4State	1.3.6.1.4.1.2011.6.139.11.1.58.5.1.3	INTEGER	read-only	Description.
hwWlanMobilityMemberIPv4Table	1.3.6.1.4.1.2011.6.139.11.1.58.5		not-accessible	Description.
OCT hwWlanMobilityMemberIPv6Addr	1.3.6.1.4.1.2011.6.139.11.1.58.6.1.1	OCTET STRING	read-write	Description.
OCT hwWlanMobilityMemberIPv6Description	1.3.6.1.4.1.2011.6.139.11.1.58.6.1.2	OCTET STRING	read-write	Description.
hwWlanMobilityMemberIPv6Entry	1.3.6.1.4.1.2011.6.139.11.1.58.6.1		not-accessible	Description.
ROW hwWlanMobilityMemberIPv6RowStatus	1.3.6.1.4.1.2011.6.139.11.1.58.6.1.4	RowStatus	read-write	Description.
INT hwWlanMobilityMemberIPv6State	1.3.6.1.4.1.2011.6.139.11.1.58.6.1.3	INTEGER	read-only	Description.
hwWlanMobilityMemberIPv6Table	1.3.6.1.4.1.2011.6.139.11.1.58.6		not-accessible	Description.
hwWlanMobilityObjects	1.3.6.1.4.1.2011.6.139.11.1.58
IP hwWlanMobilityServerIPv4	1.3.6.1.4.1.2011.6.139.11.1.58.1.5	IpAddress	read-write	Description.
OCT hwWlanMobilityServerIPv6	1.3.6.1.4.1.2011.6.139.11.1.58.1.6	OCTET STRING	read-write	Description.
IP hwWlanMobilityServerLocalIPv4	1.3.6.1.4.1.2011.6.139.11.1.58.1.9	IpAddress	read-write	Description.
INT hwWlanMobilityServerState	1.3.6.1.4.1.2011.6.139.11.1.58.1.7	INTEGER	read-only	Description.
INT hwWlanMobilityServerSwitch	1.3.6.1.4.1.2011.6.139.11.1.58.1.8	INTEGER	read-write	Description.
hwWlanNaviACLocalEntry	1.3.6.1.4.1.2011.6.139.11.1.89.1.1		not-accessible	Description.
hwWlanNaviACLocalTable	1.3.6.1.4.1.2011.6.139.11.1.89.1		not-accessible	Description.
hwWlanNaviACManagement	1.3.6.1.4.1.2011.6.139.11.1.89
INT hwWlanNaviACRemoteEnable	1.3.6.1.4.1.2011.6.139.11.1.89.2.1	INTEGER	read-write	Description.
hwWlanNaviACRemoteEntry	1.3.6.1.4.1.2011.6.139.11.1.89.3.1		not-accessible	Description.
hwWlanNaviACRemoteManagement	1.3.6.1.4.1.2011.6.139.11.1.89.2
hwWlanNaviACRemoteTable	1.3.6.1.4.1.2011.6.139.11.1.89.3		not-accessible	Description.
hwWlanNaviACVapEntry	1.3.6.1.4.1.2011.6.139.11.1.89.4.1		not-accessible	Description.
hwWlanNaviACVapTable	1.3.6.1.4.1.2011.6.139.11.1.89.4		not-accessible	Description.
OCT hwWlanNaviLocalACDescription	1.3.6.1.4.1.2011.6.139.11.1.89.3.1.4	OCTET STRING	read-write	Description.
I32 hwWlanNaviLocalACID	1.3.6.1.4.1.2011.6.139.11.1.89.3.1.1	Integer32	not-accessible	Description.
IP hwWlanNaviLocalACIPv4	1.3.6.1.4.1.2011.6.139.11.1.89.3.1.2	IpAddress	read-write	Description.
OCT hwWlanNaviLocalACIPv6	1.3.6.1.4.1.2011.6.139.11.1.89.3.1.3	OCTET STRING	read-write	Description.
MAC hwWlanNaviLocalACMac	1.3.6.1.4.1.2011.6.139.11.1.89.3.1.6	MacAddress	read-only	Description.
ROW hwWlanNaviLocalACRowStatus	1.3.6.1.4.1.2011.6.139.11.1.89.3.1.8	RowStatus	read-write	Description.
I32 hwWlanNaviLocalACStaNumber	1.3.6.1.4.1.2011.6.139.11.1.89.3.1.7	Integer32	read-only	Description.
INT hwWlanNaviLocalACState	1.3.6.1.4.1.2011.6.139.11.1.89.3.1.5	INTEGER	read-only	Description.
OCT hwWlanNaviRemoteACDescription	1.3.6.1.4.1.2011.6.139.11.1.89.1.1.4	OCTET STRING	read-write	Description.
I32 hwWlanNaviRemoteACID	1.3.6.1.4.1.2011.6.139.11.1.89.1.1.1	Integer32	not-accessible	Description.
IP hwWlanNaviRemoteACIPv4	1.3.6.1.4.1.2011.6.139.11.1.89.1.1.2	IpAddress	read-write	Description.
OCT hwWlanNaviRemoteACIPv6	1.3.6.1.4.1.2011.6.139.11.1.89.1.1.3	OCTET STRING	read-write	Description.
MAC hwWlanNaviRemoteACMac	1.3.6.1.4.1.2011.6.139.11.1.89.1.1.6	MacAddress	read-only	Description.
ROW hwWlanNaviRemoteACRowStatus	1.3.6.1.4.1.2011.6.139.11.1.89.1.1.8	RowStatus	read-write	Description.
I32 hwWlanNaviRemoteACStaNumber	1.3.6.1.4.1.2011.6.139.11.1.89.1.1.7	Integer32	read-only	Description.
INT hwWlanNaviRemoteACState	1.3.6.1.4.1.2011.6.139.11.1.89.1.1.5	INTEGER	read-only	Description.
U32 hwWlanNaviVapACWlanId	1.3.6.1.4.1.2011.6.139.11.1.89.4.1.1	Unsigned32	not-accessible	Description.
OCT hwWlanNaviVapProfileName	1.3.6.1.4.1.2011.6.139.11.1.89.4.1.2	OCTET STRING	read-write	Description.
ROW hwWlanNaviVapRowStatus	1.3.6.1.4.1.2011.6.139.11.1.89.4.1.3	RowStatus	read-write	Description.
hwWlanNeighborRelation	1.3.6.1.4.1.2011.6.139.11.1.1.31
OCT hwWlanNeighborRelationApName	1.3.6.1.4.1.2011.6.139.11.1.1.31.1.1.1	OCTET STRING	not-accessible	This object indicates the AP name.
hwWlanNeighborRelationEntry	1.3.6.1.4.1.2011.6.139.11.1.1.31.1.1		not-accessible	Description.
OCT hwWlanNeighborRelationNeighborApName	1.3.6.1.4.1.2011.6.139.11.1.1.31.1.1.2	OCTET STRING	not-accessible	This object indicates the neighbor AP name.
ROW hwWlanNeighborRelationNeighborRowStatus	1.3.6.1.4.1.2011.6.139.11.1.1.31.1.1.3	RowStatus	read-write	This object indicates the row status of this table.
hwWlanNeighborRelationTable	1.3.6.1.4.1.2011.6.139.11.1.1.31.1		not-accessible	Description.
OCT hwWlanPPSKBranchGroup	1.3.6.1.4.1.2011.6.139.11.1.29.1.9	OCTET STRING	read-write	This object indicates the branch group of this table.
hwWlanPPSKEntry	1.3.6.1.4.1.2011.6.139.11.1.29.1		not-accessible	The index of this table is hwWlanPPSKUserName
TIK hwWlanPPSKExpireDate	1.3.6.1.4.1.2011.6.139.11.1.29.1.5	TimeTicks	read-write	This object indicates the expire date of this table.
U32 hwWlanPPSKExpireHour	1.3.6.1.4.1.2011.6.139.11.1.29.1.6	Unsigned32	read-write	This object indicates the expire hour of this table.
U32 hwWlanPPSKMaxDevice	1.3.6.1.4.1.2011.6.139.11.1.29.1.8	Unsigned32	read-write	This object indicates the max device of this table.
INT hwWlanPPSKPskMode	1.3.6.1.4.1.2011.6.139.11.1.29.1.2	INTEGER	read-write	This object indicates the pre-shared key mode of this table.
OCT hwWlanPPSKPskUserGroup	1.3.6.1.4.1.2011.6.139.11.1.29.1.4	OCTET STRING	read-write	This object indicates the user group of this table.
OCT hwWlanPPSKPskValue	1.3.6.1.4.1.2011.6.139.11.1.29.1.3	OCTET STRING	read-write	This object indicates the pre-shared key value of this table.
ROW hwWlanPPSKRowStatus	1.3.6.1.4.1.2011.6.139.11.1.29.1.12	RowStatus	read-write	This object indicates the row status of this table.
OCT hwWlanPPSKSsid	1.3.6.1.4.1.2011.6.139.11.1.29.1.7	OCTET STRING	read-write	This object indicates the ssid of this table.
MAC hwWlanPPSKStaMac	1.3.6.1.4.1.2011.6.139.11.1.29.1.10	MacAddress	read-write	This object indicates the station mac-address of this table.
hwWlanPPSKTable	1.3.6.1.4.1.2011.6.139.11.1.29		not-accessible	This table is used to add and delete PPSK.
OCT hwWlanPPSKUserName	1.3.6.1.4.1.2011.6.139.11.1.29.1.1	OCTET STRING	read-write	Ppsk user name
U32 hwWlanPPSKVlan	1.3.6.1.4.1.2011.6.139.11.1.29.1.11	Unsigned32	read-write	This object indicates the vlan of this table.
hwWlanProtect	1.3.6.1.4.1.2011.6.139.11.1.1.12
IP hwWlanProtectIpAddress	1.3.6.1.4.1.2011.6.139.11.1.1.12.1	IpAddress	read-write	This object indicates the IP address of the standby AC.
OCT hwWlanProtectIPv6Address	1.3.6.1.4.1.2011.6.139.11.1.1.12.2	OCTET STRING	read-write	This object indicates setting of the IPv6 address of the standby AC.
U32 hwWlanProtectPriority	1.3.6.1.4.1.2011.6.139.11.1.1.12.3	Unsigned32	read-write	This object indicates the AC priority that determines whether the AC can be selected as the active AC. The default value is 0.
INT hwWlanProtectRestoreSwitch	1.3.6.1.4.1.2011.6.139.11.1.1.12.5	INTEGER	read-write	This object indicates the status of the switchback function. The default value is 1.
INT hwWlanProtectSwitch	1.3.6.1.4.1.2011.6.139.11.1.1.12.4	INTEGER	read-write	This object indicates the status of the hot backup function. The default value is 2.
I32 hwWlanRadioCalibrateAutoInterval	1.3.6.1.4.1.2011.6.139.11.1.57.4	Integer32	read-write	This object indicates the automatic radio calibration interval. It is expressed in minutes. The default value is 1440.
OCT hwWlanRadioCalibrateAutoStartTime	1.3.6.1.4.1.2011.6.139.11.1.57.7	OCTET STRING	read-write	This object indicates the start time of automatic radio calibration. The default value is 03:00:00.
U32 hwWlanRadioCalibrateEnvironmentDeteriorateValue	1.3.6.1.4.1.2011.6.139.11.1.57.18	Unsigned32	read-write	This object indicates the environment deterioration threshold function. The default value is 16.
INT hwWlanRadioCalibrateFlexibleRadio	1.3.6.1.4.1.2011.6.139.11.1.57.11	INTEGER	read-write	This object indicates the calibration radio flexible-radio status switch. The default value is disable(1).
INT hwWlanRadioCalibrateFlexibleRadioProcess	1.3.6.1.4.1.2011.6.139.11.1.57.13	INTEGER	read-only	This object indicates the calibration radio flexible-radio process.
OCT hwWlanRadioCalibrateFlexibleRadioRecognizeTime	1.3.6.1.4.1.2011.6.139.11.1.57.14	OCTET STRING	read-only	This object indicates the start time of flxible radio recolonization.
INT hwWlanRadioCalibrateFlexRadioManualRecognize	1.3.6.1.4.1.2011.6.139.11.1.57.12	INTEGER	read-write	This object indicates the calibration radio flexible-radio manual recognize.
hwWlanRadioCalibrateManagement	1.3.6.1.4.1.2011.6.139.11.1.57
hwWlanRadioCalibrateManagementGroups	1.3.6.1.4.1.2011.6.139.11.2.2.51			Description.
OCT hwWlanRadioCalibrateManualApGroup	1.3.6.1.4.1.2011.6.139.11.1.57.8	OCTET STRING	read-write	This object indicates the manually triggered radio calibration based on the AP group. It is valid only when the radio calibration mode is manual.
OCT hwWlanRadioCalibrateManualApList	1.3.6.1.4.1.2011.6.139.11.1.57.9	OCTET STRING	read-write	This object indicates the manually triggered radio calibrationbased on the AP list. It is valid only when the radio calibration mode is manual.
I32 hwWlanRadioCalibrateManualProcess	1.3.6.1.4.1.2011.6.139.11.1.57.10	Integer32	read-only	This object indicates the radio calibration status
I32 hwWlanRadioCalibrateManualStartup	1.3.6.1.4.1.2011.6.139.11.1.57.3	Integer32	read-write	This object indicates the manually triggered radio calibration. It is valid only when the radio calibration mode is manual.
INT hwWlanRadioCalibrateMode	1.3.6.1.4.1.2011.6.139.11.1.57.1	INTEGER	read-write	This object indicates the radio calibration mode. The default value is auto(1).
U32 hwWlanRadioCalibratePolicy	1.3.6.1.4.1.2011.6.139.11.1.57.5	Unsigned32	read-write	This object indicates the radio calibration policy.bit0: rogue-ap bit2: nonWifi bit3: noise-floor bit1 is invalid. The default value is 0, indicating that this function is not enabled.
INT hwWlanRadioCalibrateReferenceDataAnalysis	1.3.6.1.4.1.2011.6.139.11.1.57.17	INTEGER	read-write	This object indicates the status of the referencing data-analysis function. The default value is 2.
OCT hwWlanRadioCalibrateScheduleTime	1.3.6.1.4.1.2011.6.139.11.1.57.2	OCTET STRING	read-write	This object indicates the scheduled radio calibration time.
OCT hwWlanRadioCalibrateScheduleTimeRange	1.3.6.1.4.1.2011.6.139.11.1.57.16	OCTET STRING	read-write	Description.
INT hwWlanRadioCalibrateSensitivity	1.3.6.1.4.1.2011.6.139.11.1.57.6	INTEGER	read-write	This object indicates the radio calibration sensitivity. The default value is medium(1).
U32 hwWlanRadioCalibrateSensitivityCustomValue	1.3.6.1.4.1.2011.6.139.11.1.57.15	Unsigned32	read-write	This object indicates the custom threshold of calibrate sensitivity. It can be set when hwWlanRadioCalibrateSensitivity is custom(5). A larger value indicates lower calibration sensitivity.
INT hwWlanReportStaAssocInfo	1.3.6.1.4.1.2011.6.139.11.1.1.19	INTEGER	read-write	This object indicates the switch of recording user online and offline information in the log. 1:disable 2:enable.
INT hwWlanReportStaInfo	1.3.6.1.4.1.2011.6.139.11.1.1.15	INTEGER	read-write	This object indicates the switch of recording user information in the log. 1:disable 2:enable.
hwWlanStaBlacklistConfig	1.3.6.1.4.1.2011.6.139.11.1.27
hwWlanStaBlacklistProfileConfigEntry	1.3.6.1.4.1.2011.6.139.11.1.27.2.1		not-accessible	The indexes of this table are hwWlanStaBlacklistProfileName and hwWlanStaBlacklistStaMac.
hwWlanStaBlacklistProfileConfigTable	1.3.6.1.4.1.2011.6.139.11.1.27.2		not-accessible	This table is used to configure STA blacklist profiles.
hwWlanStaBlacklistProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.27.1.1		not-accessible	The index of this table is hwWlanStaBlacklistProfileName.
OCT hwWlanStaBlacklistProfileName	1.3.6.1.4.1.2011.6.139.11.1.27.1.1.1	OCTET STRING	not-accessible	This object indicates the STA blacklist profile name. It is the index of the table.
ROW hwWlanStaBlacklistProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.27.1.1.2	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
hwWlanStaBlacklistProfileTable	1.3.6.1.4.1.2011.6.139.11.1.27.1		not-accessible	This table is used to create STA blacklist profiles.
ROW hwWlanStaBlacklistRowStatus	1.3.6.1.4.1.2011.6.139.11.1.27.2.1.2	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
MAC hwWlanStaBlacklistStaMac	1.3.6.1.4.1.2011.6.139.11.1.27.2.1.1	MacAddress	not-accessible	This object indicates the blacklist.
OCT hwWlanStaBlacklistStaMacDescription	1.3.6.1.4.1.2011.6.139.11.1.27.2.1.3	OCTET STRING	read-write	This object indicates the description of the sta-mac.
hwWlanStaDelayOffline	1.3.6.1.4.1.2011.6.139.11.1.1.23
I32 hwWlanStaDelayOffLineAgingTime	1.3.6.1.4.1.2011.6.139.11.1.1.23.2	Integer32	read-write	This object indicates the station delay offline aging time. range(1..86400)
I32 hwWlanStaDelayOffLineMaxNum	1.3.6.1.4.1.2011.6.139.11.1.1.23.4	Integer32	read-write	This object indicates the max number of station delay offline. range (1..max)
INT hwWlanStaDelayOffLineNewStaOnlineSwitch	1.3.6.1.4.1.2011.6.139.11.1.1.23.3	INTEGER	read-write	This object indicates the switch of station delay offline new station online. 1:disable 2:enable.
INT hwWlanStaDelayOffLineSwitch	1.3.6.1.4.1.2011.6.139.11.1.1.23.1	INTEGER	read-write	This object indicates the switch of station delay offline. 1:disable 2:enable.
INT hwWlanStationIpv6Enable	1.3.6.1.4.1.2011.6.139.11.1.1.6	INTEGER	read-write	This object indicates the status of the IPv6 function of users. The default value is 1 . 1: disable 2: enable.
hwWlanStaWhitelistConfig	1.3.6.1.4.1.2011.6.139.11.1.26
OCT hwWlanStaWhitelistOui	1.3.6.1.4.1.2011.6.139.11.1.26.3.1.1	OCTET STRING	not-accessible	This object indicates the index of the OUI whitelist in the sta whitelist profile. Its format is XX-XX-XX.XX is a hexadecimal number.
OCT hwWlanStaWhitelistOuiDescription	1.3.6.1.4.1.2011.6.139.11.1.26.3.1.3	OCTET STRING	read-write	This object indicates the description of the oui.
ROW hwWlanStaWhitelistOuiRowStatus	1.3.6.1.4.1.2011.6.139.11.1.26.3.1.2	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
hwWlanStaWhitelistProfileConfigEntry	1.3.6.1.4.1.2011.6.139.11.1.26.2.1		not-accessible	The indexes of this table are hwWlanStaWhitelistProfileName and hwWlanStaWhitelistStaMac.
hwWlanStaWhitelistProfileConfigTable	1.3.6.1.4.1.2011.6.139.11.1.26.2		not-accessible	This table is used to configure STA whitelist profiles.
hwWlanStaWhitelistProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.26.1.1		not-accessible	The index of this table is hwWlanStaWhitelistProfileName.
OCT hwWlanStaWhitelistProfileName	1.3.6.1.4.1.2011.6.139.11.1.26.1.1.1	OCTET STRING	not-accessible	This object indicates the name of a STA whitelist profile. It is the index of the table.
hwWlanStaWhitelistProfileOuiEntry	1.3.6.1.4.1.2011.6.139.11.1.26.3.1		not-accessible	The indexes of this table are hwWlanStaWhitelistProfileName and hwWlanStaWhitelistOui.
hwWlanStaWhitelistProfileOuiTable	1.3.6.1.4.1.2011.6.139.11.1.26.3		not-accessible	This table is used to configure OUI of STA whitelist profiles.
ROW hwWlanStaWhitelistProfileRowStatus	1.3.6.1.4.1.2011.6.139.11.1.26.1.1.2	RowStatus	read-write	This object indicates the row status of this table.
hwWlanStaWhitelistProfileTable	1.3.6.1.4.1.2011.6.139.11.1.26.1		not-accessible	This table is used to create STA whitelist profiles.
ROW hwWlanStaWhitelistRowStatus	1.3.6.1.4.1.2011.6.139.11.1.26.2.1.2	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
MAC hwWlanStaWhitelistStaMac	1.3.6.1.4.1.2011.6.139.11.1.26.2.1.1	MacAddress	not-accessible	This object indicates the whitelist.
OCT hwWlanStaWhitelistStaMacDescription	1.3.6.1.4.1.2011.6.139.11.1.26.2.1.3	OCTET STRING	read-write	This object indicates the description of the sta-mac.
MAC hwWlanUsernamePasswordApMac	1.3.6.1.4.1.2011.6.139.11.1.1.3	MacAddress	read-write	This object indicates query and setting of MAC addresses of clients logging in to APs.
hwWlanVlanPoolEntry	1.3.6.1.4.1.2011.6.139.11.1.25.1		not-accessible	The index of this table is hwVlanPoolName.
hwWlanVlanPoolGroups	1.3.6.1.4.1.2011.6.139.11.2.2.23			Description.
hwWlanVlanPoolTable	1.3.6.1.4.1.2011.6.139.11.1.25		not-accessible	This table is used to configure VLAN pools.
INT hwWlanWideBandEnable	1.3.6.1.4.1.2011.6.139.11.1.11.1.7	INTEGER	read-write	This object indicates wide band status. The default value is disable.
U32 hwWmiApplicationStatisticsDataInterval	1.3.6.1.4.1.2011.6.139.11.1.91.1.21	Unsigned32	read-write	Configure the WMI application statistics data report interval, the default collecting interval is 300s
U32 hwWmiCpcarDataInterval	1.3.6.1.4.1.2011.6.139.11.1.91.1.19	Unsigned32	read-write	This object indicates the CP-CAR date collecting interval attribute of this wmi server profile. The default collecting interval is 300s.
U32 hwWmiDeviceDataInterval	1.3.6.1.4.1.2011.6.139.11.1.91.1.9	Unsigned32	read-write	This object indicates the device date collecting interval attribute of this wmi server profile. The default collecting interval is 10s.
U32 hwWmiEmdiDataInterval	1.3.6.1.4.1.2011.6.139.11.1.91.1.20	Unsigned32	read-write	This object indicates the enhanced media delivery index date collecting interval attribute of this wmi server profile. The default collecting interval is 10s.
U32 hwWmiInterfaceDataInterval	1.3.6.1.4.1.2011.6.139.11.1.91.1.12	Unsigned32	read-write	This object indicates the interface date collecting interval attribute of this wmi server profile. The default collecting interval is 60s.
U32 hwWmiKeepAliveInterval	1.3.6.1.4.1.2011.6.139.11.1.91.1.5	Unsigned32	read-write	This object indicates the keep alive interval attribute of this wmi server profile. The default report interval is 3min.
U32 hwWmiLocationDataInterval	1.3.6.1.4.1.2011.6.139.11.1.91.1.15	Unsigned32	read-write	This object indicates the location date collecting interval attribute of this wmi server profile. The default collecting interval is 60s.
U32 hwWmiLogDataInterval	1.3.6.1.4.1.2011.6.139.11.1.91.1.14	Unsigned32	read-write	This object indicates the log date collecting interval attribute of this wmi server profile. The default collecting interval is 300s.
OCT hwWmiLogModuleist	1.3.6.1.4.1.2011.6.139.11.1.91.1.22	OCTET STRING	read-write	This object indicates the log module list. For example, ff5a0000,ff630000,ffd10000. Setting this object to 0 indicates the deletion operation.
U32 hwWmiMaxPacketSize	1.3.6.1.4.1.2011.6.139.11.1.91.1.8	Unsigned32	read-write	This object indicates the max report packet size attribute of this wmi server profile. The default max report packet size is 5KB.
U32 hwWmiNeighborDataInterval	1.3.6.1.4.1.2011.6.139.11.1.91.1.18	Unsigned32	read-write	This object indicates the neighbor date collecting interval attribute of this wmi server profile. The default collecting interval is 60s.
U32 hwWmiNonWifiDataInterval	1.3.6.1.4.1.2011.6.139.11.1.91.1.26	Unsigned32	read-write	This object indicates the non-wifi data collecting interval attribute of this wmi server profile. The default collecting interval is 60s.
hwWmiProfileEntry	1.3.6.1.4.1.2011.6.139.11.1.91.1		not-accessible	The indexes of this table is hwWmiServerProfileName.
hwWmiProfileTable	1.3.6.1.4.1.2011.6.139.11.1.91		not-accessible	This table is used to get and set the wmi server profile attributes.
U32 hwWmiRadioDataInterval	1.3.6.1.4.1.2011.6.139.11.1.91.1.11	Unsigned32	read-write	This object indicates the radio date collecting interval attribute of this wmi server profile. The default collecting interval is 10s.
U32 hwWmiRadioPerformanceInterval	1.3.6.1.4.1.2011.6.139.11.1.91.1.27	Unsigned32	read-write	This object indicates the radio performance data collecting interval attribute of this wmi server profile. The default collecting interval is 300s.
U32 hwWmiReportInterval	1.3.6.1.4.1.2011.6.139.11.1.91.1.4	Unsigned32	read-write	This object indicates the report interval attribute of this wmi server profile. The default report interval is 60s.
U32 hwWmiRetryConnectionCnt	1.3.6.1.4.1.2011.6.139.11.1.91.1.7	Unsigned32	read-write	This object indicates the retry connection times attribute of this wmi server profile. The default retry times is 0, which means it will alway trys to reconnect.
U32 hwWmiRetryConnectionInterval	1.3.6.1.4.1.2011.6.139.11.1.91.1.6	Unsigned32	read-write	This object indicates the retry connection interval attribute of this wmi server profile. The default report interval is 5min.
ROW hwWmiRowStatus	1.3.6.1.4.1.2011.6.139.11.1.91.1.17	RowStatus	read-write	This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
U32 hwWmiSecurityDataInterval	1.3.6.1.4.1.2011.6.139.11.1.91.1.16	Unsigned32	read-write	This object indicates the wids date collecting interval attribute of this wmi server profile. The default collecting interval is 300s.
IP hwWmiServerIPv4	1.3.6.1.4.1.2011.6.139.11.1.91.1.2	IpAddress	read-write	This object indicates the server IPv4 address attribute of this wmi server profile.
U32 hwWmiServerPort	1.3.6.1.4.1.2011.6.139.11.1.91.1.3	Unsigned32	read-write	This object indicates the server port number attribute of this wmi server profile.
OCT hwWmiServerProfileName	1.3.6.1.4.1.2011.6.139.11.1.91.1.1	OCTET STRING	not-accessible	This object indicates the wmi server profile name.
U32 hwWmiSsidCapacityInterval	1.3.6.1.4.1.2011.6.139.11.1.91.1.28	Unsigned32	read-write	This object indicates the ssid capacity data collecting interval attribute of this wmi server profile. The default collecting interval is 300s.
U32 hwWmiSsidDataInterval	1.3.6.1.4.1.2011.6.139.11.1.91.1.10	Unsigned32	read-write	This object indicates the ssid date collecting interval attribute of this wmi server profile. The default collecting interval is 60s.
U32 hwWmiTerminalCapacityInterval	1.3.6.1.4.1.2011.6.139.11.1.91.1.29	Unsigned32	read-write	This object indicates the terminal capacity data collecting interval attribute of this wmi server profile. The default collecting interval is 300s.
U32 hwWmiTerminalDataInterval	1.3.6.1.4.1.2011.6.139.11.1.91.1.13	Unsigned32	read-write	This object indicates the terminal date collecting interval attribute of this wmi server profile. The default collecting interval is 10s.
U32 hwWmiTerminalDhcpOptionDataInterval	1.3.6.1.4.1.2011.6.139.11.1.91.1.23	Unsigned32	read-write	This object indicates the terminal Dhcp Option date collecting interval attribute of this wmi server profile. The default collecting interval is 300s.
U32 hwWmiTerminalHttpUaDataInterval	1.3.6.1.4.1.2011.6.139.11.1.91.1.24	Unsigned32	read-write	This object indicates the terminal Http Ua date collecting interval attribute of this wmi server profile. The default collecting interval is 300s.
U32 hwWmiTerminalMdnsDataInterval	1.3.6.1.4.1.2011.6.139.11.1.91.1.25	Unsigned32	read-write	This object indicates the terminal Mdns date collecting interval attribute of this wmi server profile. The default collecting interval is 300s.

RFC description

MIB module for configuring Huawei wireless LAN access points, including VAP profiles, security, QoS, and device management settings.

Start monitoring Huawei WLAN access controller/access point (global WLAN configuration) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-WLAN-CONFIGURATION-MIB

What Is HUAWEI-WLAN-CONFIGURATION-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description