All MIBs › HUAWEI-WLAN-AP-SERVICE-MIB
Organization: Huawei Technologies Co.,Ltd.
Last Updated: 2020-03-10
Category: Technology: Wireless, Vendor: Huawei, Wireless and WLAN
Description: Huawei WLAN MIB for managing AP service configurations including SSID profiles, virtual AP bindings, and service policies.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HUAWEI-WLAN-AP-SERVICE-MIB?
HUAWEI-WLAN-AP-SERVICE-MIB is a Huawei Technologies proprietary MIB configuring WDS (Wireless Distribution System) links between Huawei access points. Its VAP-info table, keyed by AP MAC/radio index, records WDS profile name and BSSID, while a WDS-link table records AP/peer MAC, radio ID, WLAN ID, AP name/group, WDS profile name/mode/type, STP mode, instance ID/state lists, coverage distance, channel, and max RSSI. As a configuration/status MIB it lets an administrator confirm a WDS bridge link's signal quality (RSSI) and topology between two Huawei access points. It is deployed on Huawei Technologies wireless access points (WDS). Engineers can download the HUAWEI-WLAN-AP-SERVICE-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-WLAN-AP-SERVICE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Huawei Technologies wireless access points (WDS)
Monitoring Examples
An administrator checks hwWlanWdsLinkMaxRssi and hwWlanWdsLinkCoverageDistance to confirm WDS bridge link quality between two Huawei access points.
What Can Be Monitored
- WDS link signal quality and topology
This MIB depends on
Related MIBs
Imported Objects
From HUAWEI-WLAN-MIB
| hwWlan | MODULE-IDENTITY |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter64 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DateAndTime | |
| MacAddress | |
| RowStatus |
How to Use in IPNetwork Monitor
Example using hwWlanApIotCardRecvPackets OID:
Select a Huawei wireless access point (WDS bridge links) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hwWlanApIotCardRecvPackets into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. This object indicates the total number of frames received on iot card, which is extended to 64 bits. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hwWlanService | 1.3.6.1.4.1.2011.6.139.19 | V1.32, add the nodes of hwWlanAeroscoutLocationViaAcTrap and hwWlanAeroscoutLocationViaAcRestoreTrap | ||
| hwWlanServiceObjects | 1.3.6.1.4.1.2011.6.139.19.1 | |||
| hwWlanWds | 1.3.6.1.4.1.2011.6.139.19.1.1 | |||
| hwWlanWdsVapInfoTable | 1.3.6.1.4.1.2011.6.139.19.1.1.1 | not-accessible | This table is used to query WDS VAP information. | |
| hwWlanWdsVapInfoEntry | 1.3.6.1.4.1.2011.6.139.19.1.1.1.1 | not-accessible | The indexes of this table are hwWlanWdsVapApMac, hwWlanWdsVapRadioIndex, and hwWlanWdsVapWdsProfileName. | |
| MAC hwWlanWdsVapApMac | 1.3.6.1.4.1.2011.6.139.19.1.1.1.1.1 | MacAddress | not-accessible | This object indicates the MAC address of the AP. |
| I32 hwWlanWdsVapRadioIndex | 1.3.6.1.4.1.2011.6.139.19.1.1.1.1.2 | Integer32 | not-accessible | This object indicates the radio index. |
| OCT hwWlanWdsVapWdsProfileName | 1.3.6.1.4.1.2011.6.139.19.1.1.1.1.3 | OCTET STRING | not-accessible | This object indicates the WDS profile name. |
| OCT hwWlanWdsVapBssid | 1.3.6.1.4.1.2011.6.139.19.1.1.1.1.4 | OCTET STRING | read-only | This object indicates the BSS ID. |
| hwWlanWdsLinkTable | 1.3.6.1.4.1.2011.6.139.19.1.1.2 | not-accessible | This table is used to query WDS link information. | |
| hwWlanWdsLinkEntry | 1.3.6.1.4.1.2011.6.139.19.1.1.2.1 | not-accessible | The indexes of this table are hwWlanWdsLinkApMac, hwWlanWdsLinkApRadioId, and hwWlanWdsLinkIndex. | |
| MAC hwWlanWdsLinkApMac | 1.3.6.1.4.1.2011.6.139.19.1.1.2.1.1 | MacAddress | not-accessible | This object indicates the MAC address of the local AP. |
| I32 hwWlanWdsLinkApRadioId | 1.3.6.1.4.1.2011.6.139.19.1.1.2.1.2 | Integer32 | not-accessible | This object indicates the radio ID of the local AP. |
| I32 hwWlanWdsLinkIndex | 1.3.6.1.4.1.2011.6.139.19.1.1.2.1.3 | Integer32 | not-accessible | This object indicates the index of the virtual link. |
| I32 hwWlanWdsLinkWlanID | 1.3.6.1.4.1.2011.6.139.19.1.1.2.1.4 | Integer32 | read-only | This object indicates the WLAN ID. |
| OCT hwWlanWdsLinkApName | 1.3.6.1.4.1.2011.6.139.19.1.1.2.1.5 | OCTET STRING | read-only | This object indicates the name of the local AP. |
| OCT hwWlanWdsLinkApGroup | 1.3.6.1.4.1.2011.6.139.19.1.1.2.1.6 | OCTET STRING | read-only | This object indicates the group to which the local AP belongs. |
| MAC hwWlanWdsLinkPeerApMac | 1.3.6.1.4.1.2011.6.139.19.1.1.2.1.7 | MacAddress | read-only | This object indicates the MAC address of the peer AP. |
| OCT hwWlanWdsLinkPeerApName | 1.3.6.1.4.1.2011.6.139.19.1.1.2.1.8 | OCTET STRING | read-only | This object indicates the name of the peer AP. |
| OCT hwWlanWdsLinkWdsProfileName | 1.3.6.1.4.1.2011.6.139.19.1.1.2.1.9 | OCTET STRING | read-only | This object indicates the name of the WDS profile. |
| INT hwWlanMacWdsLinkWdsMode | 1.3.6.1.4.1.2011.6.139.19.1.1.2.1.10 | INTEGER | read-only | This object indicates the role of the local AP. |
| INT hwWlanWdsLinkWdsType | 1.3.6.1.4.1.2011.6.139.19.1.1.2.1.11 | INTEGER | read-only | This object indicates the link subtype. |
| INT hwWlanWdsLinkStpMode | 1.3.6.1.4.1.2011.6.139.19.1.1.2.1.12 | INTEGER | read-only | This object indicates the STP mode. |
| OCT hwWlanWdsLinkInstanceIdList | 1.3.6.1.4.1.2011.6.139.19.1.1.2.1.13 | OCTET STRING | read-only | This object indicates the forwarding state ID of the instance. |
| OCT hwWlanWdsLinkInstanceStateList | 1.3.6.1.4.1.2011.6.139.19.1.1.2.1.14 | OCTET STRING | read-only | This object indicates the forwarding state of the instance. |
| I32 hwWlanWdsLinkCoverageDistance | 1.3.6.1.4.1.2011.6.139.19.1.1.2.1.15 | Integer32 | read-only | This object indicates the coverage distance of the local AP. The unit is 100 m. |
| I32 hwWlanWdsLinkChannel | 1.3.6.1.4.1.2011.6.139.19.1.1.2.1.16 | Integer32 | read-only | This object indicates the link channel. |
| I32 hwWlanWdsLinkMaxRssi | 1.3.6.1.4.1.2011.6.139.19.1.1.2.1.17 | Integer32 | read-only | This object indicates the maximum RSSI of the link. |
| I32 hwWlanWdsLinkRssi | 1.3.6.1.4.1.2011.6.139.19.1.1.2.1.18 | Integer32 | read-only | This object indicates the RSSI of the link. |
| I32 hwWlanWdsLinkSnr | 1.3.6.1.4.1.2011.6.139.19.1.1.2.1.19 | Integer32 | read-only | This object indicates the SNR. The unit is 0.01 dB. |
| I32 hwWlanWdsLinkPER | 1.3.6.1.4.1.2011.6.139.19.1.1.2.1.20 | Integer32 | read-only | This object indicates the packet error rate. |
| I32 hwWlanWdsLinkResendRatio | 1.3.6.1.4.1.2011.6.139.19.1.1.2.1.21 | Integer32 | read-only | This object indicates the packet retransmission ratio. |
| INT hwWlanWdsLinkPeerAPStatus | 1.3.6.1.4.1.2011.6.139.19.1.1.2.1.22 | INTEGER | read-only | This object indicates the status of the peer AP. |
| U32 hwWlanWdsLinkApId | 1.3.6.1.4.1.2011.6.139.19.1.1.2.1.23 | Unsigned32 | read-only | This object indicates the AP ID. |
| U32 hwWlanWdsLinkPeerApId | 1.3.6.1.4.1.2011.6.139.19.1.1.2.1.24 | Unsigned32 | read-only | This object indicates the peer AP ID. |
| I32 hwWlanWdsLinkSecondChannel | 1.3.6.1.4.1.2011.6.139.19.1.1.2.1.25 | Integer32 | read-only | This object indicates the second channel ID. |
| OCT hwWlanWdsLinkChainSnr | 1.3.6.1.4.1.2011.6.139.19.1.1.2.1.26 | OCTET STRING | read-only | This object indicates the wds link snr value. The string format is %s/%s/%s/%s. |
| hwWlanMesh | 1.3.6.1.4.1.2011.6.139.19.1.2 | |||
| hwWlanMeshVapInfoTable | 1.3.6.1.4.1.2011.6.139.19.1.2.1 | not-accessible | This table is used to query Mesh VAP information. | |
| hwWlanMeshVapInfoEntry | 1.3.6.1.4.1.2011.6.139.19.1.2.1.1 | not-accessible | The indexes of this table are hwWlanMeshVapApMac, hwWlanMeshVapRadioIndex, and hwWlanMeshVapMeshProfileName. | |
| MAC hwWlanMeshVapApMac | 1.3.6.1.4.1.2011.6.139.19.1.2.1.1.1 | MacAddress | not-accessible | This object indicates the AP index. |
| I32 hwWlanMeshVapRadioIndex | 1.3.6.1.4.1.2011.6.139.19.1.2.1.1.2 | Integer32 | not-accessible | This object indicates the radio index. |
| OCT hwWlanMeshVapMeshProfileName | 1.3.6.1.4.1.2011.6.139.19.1.2.1.1.3 | OCTET STRING | not-accessible | This object indicates the Mesh profile name. |
| MAC hwWlanMeshVapBssid | 1.3.6.1.4.1.2011.6.139.19.1.2.1.1.4 | MacAddress | read-only | This object indicates the BSS ID. |
| INT hwWlanMeshVapAuthType | 1.3.6.1.4.1.2011.6.139.19.1.2.1.1.5 | INTEGER | read-only | This object indicates the authentication method. |
| hwWlanMeshLinkTable | 1.3.6.1.4.1.2011.6.139.19.1.2.2 | not-accessible | This table is used to query Mesh link information. | |
| hwWlanMeshLinkEntry | 1.3.6.1.4.1.2011.6.139.19.1.2.2.1 | not-accessible | The indexes of this table are hwWlanMeshLinkApMac, hwWlanMeshLinkApRadioId, and hwWlanMeshLinkIndex. | |
| MAC hwWlanMeshLinkApMac | 1.3.6.1.4.1.2011.6.139.19.1.2.2.1.1 | MacAddress | not-accessible | This object indicates the MAC address of the local AP. |
| I32 hwWlanMeshLinkApRadioId | 1.3.6.1.4.1.2011.6.139.19.1.2.2.1.2 | Integer32 | not-accessible | This object indicates the radio ID of the local AP. |
| I32 hwWlanMeshLinkIndex | 1.3.6.1.4.1.2011.6.139.19.1.2.2.1.3 | Integer32 | not-accessible | This object indicates the Mesh link index. |
| OCT hwWlanMeshLinkApName | 1.3.6.1.4.1.2011.6.139.19.1.2.2.1.4 | OCTET STRING | read-only | This object indicates the name of the local AP. |
| OCT hwWlanMeshLinkApGroup | 1.3.6.1.4.1.2011.6.139.19.1.2.2.1.5 | OCTET STRING | read-only | This object indicates the group to which the local AP belongs. |
| INT hwWlanMeshLinkMeshRole | 1.3.6.1.4.1.2011.6.139.19.1.2.2.1.6 | INTEGER | read-only | This object indicates the role of the local AP. |
| I32 hwWlanMeshLinkWlanID | 1.3.6.1.4.1.2011.6.139.19.1.2.2.1.7 | Integer32 | read-only | This object indicates the WLAN ID. |
| MAC hwWlanMeshLinkPeerApMac | 1.3.6.1.4.1.2011.6.139.19.1.2.2.1.8 | MacAddress | read-only | This object indicates the MAC address of the peer AP. |
| OCT hwWlanMeshLinkPeerApName | 1.3.6.1.4.1.2011.6.139.19.1.2.2.1.9 | OCTET STRING | read-only | This object indicates the name of the peer AP. |
| I32 hwWlanMeshLinkChannelID | 1.3.6.1.4.1.2011.6.139.19.1.2.2.1.10 | Integer32 | read-only | This object indicates the channel ID. |
| I32 hwWlanMeshLinkCoverageDistance | 1.3.6.1.4.1.2011.6.139.19.1.2.2.1.11 | Integer32 | read-only | This object indicates the coverage distance of the local AP. The unit is 100 m. |
| I32 hwWlanMeshLinkRssiValue | 1.3.6.1.4.1.2011.6.139.19.1.2.2.1.12 | Integer32 | read-only | This object indicates the RSSI value. |
| I32 hwWlanMeshLinkMaxRssi | 1.3.6.1.4.1.2011.6.139.19.1.2.2.1.13 | Integer32 | read-only | This object indicates the maximum RSSI. |
| I32 hwWlanMeshLinkSnr | 1.3.6.1.4.1.2011.6.139.19.1.2.2.1.14 | Integer32 | read-only | This object indicates the SNR. The unit is 0.01 dB. |
| I32 hwWlanMeshLinkPER | 1.3.6.1.4.1.2011.6.139.19.1.2.2.1.15 | Integer32 | read-only | This object indicates the packet error rate. |
| I32 hwWlanMeshLinkResendRatio | 1.3.6.1.4.1.2011.6.139.19.1.2.2.1.16 | Integer32 | read-only | This object indicates the packet retransmission ratio. |
| INT hwWlanMeshLinkPeerAPStatus | 1.3.6.1.4.1.2011.6.139.19.1.2.2.1.17 | INTEGER | read-only | This object indicates the status of the peer AP. |
| U32 hwWlanMeshLinkApId | 1.3.6.1.4.1.2011.6.139.19.1.2.2.1.18 | Unsigned32 | read-only | This object indicates the AP ID. |
| U32 hwWlanMeshLinkPeerApId | 1.3.6.1.4.1.2011.6.139.19.1.2.2.1.19 | Unsigned32 | read-only | This object indicates the peer AP ID. |
| I32 hwWlanMeshLinkSecondChannel | 1.3.6.1.4.1.2011.6.139.19.1.2.2.1.20 | Integer32 | read-only | This object indicates the second channel ID. |
| OCT hwWlanMeshLinkChainSnr | 1.3.6.1.4.1.2011.6.139.19.1.2.2.1.21 | OCTET STRING | read-only | This object indicates the mesh link snr value. The string format is %s/%s/%s/%s. |
| I32 hwWlanMeshLinkProfileServiceIdx | 1.3.6.1.4.1.2011.6.139.19.1.2.2.1.22 | Integer32 | read-only | This object indicates the mesh link profile service index. |
| OCT hwWlanMeshLinkMeshId | 1.3.6.1.4.1.2011.6.139.19.1.2.2.1.23 | OCTET STRING | read-only | This object indicates the mesh ID |
| U32 hwWlanMeshLinkTx | 1.3.6.1.4.1.2011.6.139.19.1.2.2.1.24 | Unsigned32 | read-only | This object indicates the transmission rate of the mesh link |
| U32 hwWlanMeshLinkRx | 1.3.6.1.4.1.2011.6.139.19.1.2.2.1.25 | Unsigned32 | read-only | This object indicates the receiving rate of the mesh link |
| hwWlanCalibrateInfo | 1.3.6.1.4.1.2011.6.139.19.1.3 | |||
| hwWlanRadioCalibrateStatisicsTable | 1.3.6.1.4.1.2011.6.139.19.1.3.1 | not-accessible | This table is used to query and clear the number of radio environment deterioration reporting and the number of times that transmit power and channel are automatically calibrated. | |
| hwWlanRadioCalibrateStatisicsEntry | 1.3.6.1.4.1.2011.6.139.19.1.3.1.1 | not-accessible | The indexes of this table are hwWlanRadioCalibrateStatisicsApMac and hwWlanRadioCalibrateStatisicsRadioId. | |
| MAC hwWlanRadioCalibrateStatisicsApMac | 1.3.6.1.4.1.2011.6.139.19.1.3.1.1.1 | MacAddress | not-accessible | This object indicates the MAC address of the AP. |
| U32 hwWlanRadioCalibrateStatisicsRadioId | 1.3.6.1.4.1.2011.6.139.19.1.3.1.1.2 | Unsigned32 | not-accessible | This object indicates the radio ID. |
| U32 hwWlanRadioCalStatisSignalBadCount | 1.3.6.1.4.1.2011.6.139.19.1.3.1.1.3 | Unsigned32 | read-only | This object indicates the number of times that radio parameters are automatically calibrated because the packet loss ratio or collision ratio exceeds the threshold. |
| U32 hwWlanRadioCalStatisCalibratePowerCount | 1.3.6.1.4.1.2011.6.139.19.1.3.1.1.4 | Unsigned32 | read-only | This object indicates the number of times transmit power is automatically calibrated. |
| U32 hwWlanRadioCalStatisCalibrateChannelCount | 1.3.6.1.4.1.2011.6.139.19.1.3.1.1.5 | Unsigned32 | read-only | This object indicates the number of times the channel is automatically calibrated. |
| INT hwWlanRadioCalibrateStatisicsOperMode | 1.3.6.1.4.1.2011.6.139.19.1.3.1.1.6 | INTEGER | read-write | This object indicates the operation mode. |
| U32 hwWlanRadioCalibrateStatisicsApId | 1.3.6.1.4.1.2011.6.139.19.1.3.1.1.7 | Unsigned32 | read-only | Description. |
| hwWlanRadioChannelSwitchRecordTable | 1.3.6.1.4.1.2011.6.139.19.1.3.2 | not-accessible | This table is used to query the channel switching history, including the changed radio, reason for channel switching, channel switching time, and channels before and after switching. | |
| hwWlanRadioChannelSwitchRecordEntry | 1.3.6.1.4.1.2011.6.139.19.1.3.2.1 | not-accessible | The indexes of this table are hwWlanRadioChannelSwitchRecordTimeIndex and hwWlanRadioChannelSwitchRecordSubIndex. | |
| U32 hwWlanRadioChannelSwitchRecordTimeIndex | 1.3.6.1.4.1.2011.6.139.19.1.3.2.1.1 | Unsigned32 | not-accessible | This object indicates the internal index of the table. |
| U32 hwWlanRadioChannelSwitchRecordSubIndex | 1.3.6.1.4.1.2011.6.139.19.1.3.2.1.2 | Unsigned32 | not-accessible | This object indicates the internal subindex of the table. |
| OCT hwWlanRadioChannelSwitchRecordApName | 1.3.6.1.4.1.2011.6.139.19.1.3.2.1.3 | OCTET STRING | read-only | This object indicates the AP name. |
| U32 hwWlanRadioChannelSwitchRecordRadioId | 1.3.6.1.4.1.2011.6.139.19.1.3.2.1.4 | Unsigned32 | read-only | This object indicates the radio ID. |
| U32 hwWlanRadioChannelSwitchRecordOldChannel | 1.3.6.1.4.1.2011.6.139.19.1.3.2.1.5 | Unsigned32 | read-only | This object indicates the channel before the switchover. |
| U32 hwWlanRadioChannelSwitchRecordNewChannel | 1.3.6.1.4.1.2011.6.139.19.1.3.2.1.6 | Unsigned32 | read-only | This object indicates the channel after the switchover. |
| OCT hwWlanRadioChannelSwitchRecordReason | 1.3.6.1.4.1.2011.6.139.19.1.3.2.1.7 | OCTET STRING | read-only | This object indicates the reason for channel switching. |
| OCT hwWlanRadioChannelSwitchRecordTime | 1.3.6.1.4.1.2011.6.139.19.1.3.2.1.8 | OCTET STRING | read-only | This object indicates the channel switching time. |
| U32 hwWlanRadioChSwitchRecordOldSecChannel | 1.3.6.1.4.1.2011.6.139.19.1.3.2.1.9 | Unsigned32 | read-only | This object indicates the second channel before the switchover. |
| U32 hwWlanRadioChSwitchRecordNewSecChannel | 1.3.6.1.4.1.2011.6.139.19.1.3.2.1.10 | Unsigned32 | read-only | This object indicates the second channel after the switchover. |
| I32 hwWlanRadioResetChannelSwitchRecord | 1.3.6.1.4.1.2011.6.139.19.1.3.3 | Integer32 | read-write | This object indicates deletion of all information.Default value: 1 |
| hwWlanRadioCalibrationSwitchRecordTable | 1.3.6.1.4.1.2011.6.139.19.1.3.4 | not-accessible | This table is used to query the channel or power switching history causing by calibration, including the changed radio, reason for channel switching, channel switching time, and channels before and after switching. | |
| hwWlanRadioCalibrationSwitchRecordEntry | 1.3.6.1.4.1.2011.6.139.19.1.3.4.1 | not-accessible | The indexes of this table are hwWlanRadioCalibrationSwitchRecordTimeIndex and hwWlanRadioCalibrationSwitchRecordSubIndex. | |
| U32 hwWlanRadioCalibrationSwitchRecordTimeIndex | 1.3.6.1.4.1.2011.6.139.19.1.3.4.1.1 | Unsigned32 | not-accessible | This object indicates the internal index of the table. |
| U32 hwWlanRadioCalibrationSwitchRecordSubIndex | 1.3.6.1.4.1.2011.6.139.19.1.3.4.1.2 | Unsigned32 | not-accessible | This object indicates the internal subindex of the table. |
| U32 hwWlanRadioCalibrationSwitchRecordApId | 1.3.6.1.4.1.2011.6.139.19.1.3.4.1.3 | Unsigned32 | read-only | This object indicates the AP index. |
| OCT hwWlanRadioCalibrationSwitchRecordApName | 1.3.6.1.4.1.2011.6.139.19.1.3.4.1.4 | OCTET STRING | read-only | This object indicates the AP name. |
| U32 hwWlanRadioCalibrationSwitchRecordRadioId | 1.3.6.1.4.1.2011.6.139.19.1.3.4.1.5 | Unsigned32 | read-only | This object indicates the radio ID. |
| U32 hwWlanRadioCalibrationSwitchRecordOldChannel | 1.3.6.1.4.1.2011.6.139.19.1.3.4.1.6 | Unsigned32 | read-only | This object indicates the channel before the switchover. |
| U32 hwWlanRadioCalibrationSwitchRecordNewChannel | 1.3.6.1.4.1.2011.6.139.19.1.3.4.1.7 | Unsigned32 | read-only | This object indicates the channel after the switchover. |
| U32 hwWlanRadioCalibrationSwitchRecordOldEirp | 1.3.6.1.4.1.2011.6.139.19.1.3.4.1.8 | Unsigned32 | read-only | This object indicates the channel before the switchover. |
| U32 hwWlanRadioCalibrationSwitchRecordNewEirp | 1.3.6.1.4.1.2011.6.139.19.1.3.4.1.9 | Unsigned32 | read-only | This object indicates the channel after the switchover. |
| I32 hwWlanRadioCalibrationSwitchRecordOldRssi | 1.3.6.1.4.1.2011.6.139.19.1.3.4.1.10 | Integer32 | read-only | This object indicates the channel before the switchover. |
| I32 hwWlanRadioCalibrationSwitchRecordNewRssi | 1.3.6.1.4.1.2011.6.139.19.1.3.4.1.11 | Integer32 | read-only | This object indicates the channel after the switchover. |
| OCT hwWlanRadioCalibrationSwitchRecordReason | 1.3.6.1.4.1.2011.6.139.19.1.3.4.1.12 | OCTET STRING | read-only | This object indicates the reason for channel switching. |
| OCT hwWlanRadioCalibrationSwitchRecordTime | 1.3.6.1.4.1.2011.6.139.19.1.3.4.1.13 | OCTET STRING | read-only | This object indicates the channel switching time. |
| INT hwWlanRadioCalibrationSwitchRecordNewBandwidth | 1.3.6.1.4.1.2011.6.139.19.1.3.4.1.14 | INTEGER | read-only | This object indicates the bandwidth after calibration. |
| INT hwWlanRadioCalibrationSwitchRecordOldBandwidth | 1.3.6.1.4.1.2011.6.139.19.1.3.4.1.15 | INTEGER | read-only | This object indicates the bandwidth before calibration. |
| U32 hwWlanRadioCalibrationSwitchRecordNewSecChannel | 1.3.6.1.4.1.2011.6.139.19.1.3.4.1.16 | Unsigned32 | read-only | This object indicates the second channel after calibration. |
| U32 hwWlanRadioCalibrationSwitchRecordOldSecChannel | 1.3.6.1.4.1.2011.6.139.19.1.3.4.1.17 | Unsigned32 | read-only | This object indicates the second channel before calibration. |
| hwWlanSpectrum | 1.3.6.1.4.1.2011.6.139.19.1.4 | |||
| hwWlanSpectrumReporterTable | 1.3.6.1.4.1.2011.6.139.19.1.4.1 | not-accessible | This table is used to query the radio enabled with spectrum analysis data reporting. | |
| hwWlanSpectrumReporterEntry | 1.3.6.1.4.1.2011.6.139.19.1.4.1.1 | not-accessible | The indexes of this table are hwWlanSpectrumReporterApMac and hwWlanSpectrumReporterRadioId. | |
| MAC hwWlanSpectrumReporterApMac | 1.3.6.1.4.1.2011.6.139.19.1.4.1.1.1 | MacAddress | not-accessible | This object indicates the MAC address of the AP. |
| I32 hwWlanSpectrumReporterRadioId | 1.3.6.1.4.1.2011.6.139.19.1.4.1.1.2 | Integer32 | not-accessible | This object indicates the radio ID. |
| OCT hwWlanSpectrumReporterApName | 1.3.6.1.4.1.2011.6.139.19.1.4.1.1.3 | OCTET STRING | read-only | This object indicates the AP name. |
| hwWlanVehicleGroundFastLinkHandover | 1.3.6.1.4.1.2011.6.139.19.1.5 | |||
| hwWlanProxyTrackSideEquipTable | 1.3.6.1.4.1.2011.6.139.19.1.5.1 | not-accessible | Description. | |
| hwWlanProxyTrackSideEquipEntry | 1.3.6.1.4.1.2011.6.139.19.1.5.1.1 | not-accessible | Description. | |
| I32 hwWlanProxyTrackSideEquipIndex | 1.3.6.1.4.1.2011.6.139.19.1.5.1.1.1 | Integer32 | not-accessible | Description. |
| MAC hwWlanProxyTrackSideEquipMac | 1.3.6.1.4.1.2011.6.139.19.1.5.1.1.2 | MacAddress | read-write | Description. |
| I32 hwWlanProxyTrackSideEquipVlanID | 1.3.6.1.4.1.2011.6.139.19.1.5.1.1.3 | Integer32 | read-write | Description. |
| ROW hwWlanProxyTrackSideEquipRowStatus | 1.3.6.1.4.1.2011.6.139.19.1.5.1.1.4 | RowStatus | read-create | Description. |
| hwWlanProxyOnBoardEquipTable | 1.3.6.1.4.1.2011.6.139.19.1.5.2 | not-accessible | Description. | |
| hwWlanProxyOnBoardEquipEntry | 1.3.6.1.4.1.2011.6.139.19.1.5.2.1 | not-accessible | Description. | |
| I32 hwWlanProxyOnBoardEquipIndex | 1.3.6.1.4.1.2011.6.139.19.1.5.2.1.1 | Integer32 | not-accessible | Description. |
| MAC hwWlanProxyOnBoardEquipMac | 1.3.6.1.4.1.2011.6.139.19.1.5.2.1.2 | MacAddress | read-write | Description. |
| I32 hwWlanProxyOnBoardEquipVlanID | 1.3.6.1.4.1.2011.6.139.19.1.5.2.1.3 | Integer32 | read-write | Description. |
| ROW hwWlanProxyOnBoardEquipRowStatus | 1.3.6.1.4.1.2011.6.139.19.1.5.2.1.4 | RowStatus | read-create | Description. |
| hwWlanHandoverTraceTable | 1.3.6.1.4.1.2011.6.139.19.1.5.3 | not-accessible | Description. | |
| hwWlanHandoverTraceEntry | 1.3.6.1.4.1.2011.6.139.19.1.5.3.1 | not-accessible | Description. | |
| I32 hwWlanHandoverTraceIndex | 1.3.6.1.4.1.2011.6.139.19.1.5.3.1.1 | Integer32 | not-accessible | Description. |
| OCT hwWlanHandoverTimeStamp | 1.3.6.1.4.1.2011.6.139.19.1.5.3.1.2 | OCTET STRING | read-only | Description. |
| MAC hwWlanHandoverFromApMac | 1.3.6.1.4.1.2011.6.139.19.1.5.3.1.3 | MacAddress | read-only | Description. |
| I32 hwWlanHandoverFromApRssi | 1.3.6.1.4.1.2011.6.139.19.1.5.3.1.4 | Integer32 | read-only | Description. |
| MAC hwWlanHandoverToApMac | 1.3.6.1.4.1.2011.6.139.19.1.5.3.1.5 | MacAddress | read-only | Description. |
| I32 hwWlanHandoverToApRssi | 1.3.6.1.4.1.2011.6.139.19.1.5.3.1.6 | Integer32 | read-only | Description. |
| U32 hwWlanHandoverFromApLocationID | 1.3.6.1.4.1.2011.6.139.19.1.5.3.1.7 | Unsigned32 | read-only | Description. |
| U32 hwWlanHandoverToApLocationID | 1.3.6.1.4.1.2011.6.139.19.1.5.3.1.8 | Unsigned32 | read-only | Description. |
| hwWlanNeighborApTable | 1.3.6.1.4.1.2011.6.139.19.1.5.4 | not-accessible | This table is used to query the RSSI values of an AP's neighboring APs or specified APs. | |
| hwWlanNeighborApEntry | 1.3.6.1.4.1.2011.6.139.19.1.5.4.1 | not-accessible | The indexes of this table are hwWlanNeighborApLocalApMac and hwWlanNeighborApLocalRadioId. | |
| MAC hwWlanNeighborApLocalApMac | 1.3.6.1.4.1.2011.6.139.19.1.5.4.1.1 | MacAddress | not-accessible | This object indicates the MAC address of the AP. |
| I32 hwWlanNeighborApLocalRadioId | 1.3.6.1.4.1.2011.6.139.19.1.5.4.1.2 | Integer32 | not-accessible | This object indicates the radio ID. |
| OCT hwWlanNeighborApLocalApName | 1.3.6.1.4.1.2011.6.139.19.1.5.4.1.3 | OCTET STRING | read-only | This object indicates the AP name. |
| OCT hwWlanNeighborApMacList | 1.3.6.1.4.1.2011.6.139.19.1.5.4.1.4 | OCTET STRING | read-only | This object indicates the MAC address of the neighboring AP. |
| OCT hwWlanNeighborApNameList | 1.3.6.1.4.1.2011.6.139.19.1.5.4.1.5 | OCTET STRING | read-only | This object indicates the name of the neighboring AP. |
| OCT hwWlanNeighborApRssiList | 1.3.6.1.4.1.2011.6.139.19.1.5.4.1.6 | OCTET STRING | read-only | This object indicates the RSSI of the neighboring AP. |
| OCT hwWlanNeighborApUpdateTime | 1.3.6.1.4.1.2011.6.139.19.1.5.4.1.7 | OCTET STRING | read-only | This object indicates the update time of the neighboring AP. |
| OCT hwWlanNeighborApLocationIDList | 1.3.6.1.4.1.2011.6.139.19.1.5.4.1.8 | OCTET STRING | read-only | This object indicates location information of the neighboring AP. |
| U32 hwWlanNeighborApLocalLocationID | 1.3.6.1.4.1.2011.6.139.19.1.5.4.1.9 | Unsigned32 | read-only | This object indicates location information of the local AP. |
| U32 hwWlanNeighborApLocalApId | 1.3.6.1.4.1.2011.6.139.19.1.5.4.1.10 | Unsigned32 | read-only | This object indicates the AP ID. |
| OCT hwWlanNeighborApIdList | 1.3.6.1.4.1.2011.6.139.19.1.5.4.1.11 | OCTET STRING | read-only | This object indicates the AP ID list. |
| hwWlanBLESiteInfo | 1.3.6.1.4.1.2011.6.139.19.1.6 | |||
| hwWlanBLESiteInfoTable | 1.3.6.1.4.1.2011.6.139.19.1.6.1 | not-accessible | Description. | |
| hwWlanBLESiteInfoEntry | 1.3.6.1.4.1.2011.6.139.19.1.6.1.1 | not-accessible | Description. | |
| MAC hwWlanBLESiteMacAddress | 1.3.6.1.4.1.2011.6.139.19.1.6.1.1.1 | MacAddress | read-only | Description. |
| I32 hwWlanBLESiteRssi | 1.3.6.1.4.1.2011.6.139.19.1.6.1.1.2 | Integer32 | read-only | Description. |
| I32 hwWlanBLESitePower | 1.3.6.1.4.1.2011.6.139.19.1.6.1.1.3 | Integer32 | read-only | Description. |
| OCT hwWlanBLESiteAdvData | 1.3.6.1.4.1.2011.6.139.19.1.6.1.1.4 | OCTET STRING | read-only | Description. |
| U32 hwWlanBLESiteAgingTimeout | 1.3.6.1.4.1.2011.6.139.19.1.6.1.1.5 | Unsigned32 | read-only | Description. |
| INT hwWlanBLESiteDetachedFlag | 1.3.6.1.4.1.2011.6.139.19.1.6.1.1.6 | INTEGER | read-only | This object indicates whether or not the ble is detached. |
| INT hwWlanBLESiteType | 1.3.6.1.4.1.2011.6.139.19.1.6.1.1.7 | INTEGER | read-only | Description. |
| I32 hwWlanBLESiteHostAPID | 1.3.6.1.4.1.2011.6.139.19.1.6.1.1.8 | Integer32 | read-only | Description. |
| OCT hwWlanBLESiteHostAPName | 1.3.6.1.4.1.2011.6.139.19.1.6.1.1.9 | OCTET STRING | read-only | Description. |
| I32 hwWlanBLESiteBroadCastCount | 1.3.6.1.4.1.2011.6.139.19.1.6.1.1.10 | Integer32 | read-only | Description. |
| hwWlanApIotCardInfo | 1.3.6.1.4.1.2011.6.139.19.1.7 | |||
| hwWlanApIotCardTable | 1.3.6.1.4.1.2011.6.139.19.1.7.1 | not-accessible | Description. | |
| hwWlanApIotCardEntry | 1.3.6.1.4.1.2011.6.139.19.1.7.1.1 | not-accessible | Description. | |
| U32 hwWlanApIotCardApId | 1.3.6.1.4.1.2011.6.139.19.1.7.1.1.1 | Unsigned32 | not-accessible | Description. |
| I32 hwWlanApIotCardIndex | 1.3.6.1.4.1.2011.6.139.19.1.7.1.1.2 | Integer32 | not-accessible | Description. |
| INT hwWlanApIotCardState | 1.3.6.1.4.1.2011.6.139.19.1.7.1.1.3 | INTEGER | read-only | Description. |
| OCT hwWlanApIotCardApName | 1.3.6.1.4.1.2011.6.139.19.1.7.1.1.4 | OCTET STRING | read-only | Description. |
| INT hwWlanApIotCardSupportInfo | 1.3.6.1.4.1.2011.6.139.19.1.7.1.1.5 | INTEGER | read-only | Description. |
| OCT hwWlanApIotCardProtocolVer | 1.3.6.1.4.1.2011.6.139.19.1.7.1.1.6 | OCTET STRING | read-only | Description. |
| OCT hwWlanApIotCardWirelessStard | 1.3.6.1.4.1.2011.6.139.19.1.7.1.1.7 | OCTET STRING | read-only | Description. |
| OCT hwWlanApIotCardFreq | 1.3.6.1.4.1.2011.6.139.19.1.7.1.1.8 | OCTET STRING | read-only | Description. |
| OCT hwWlanApIotCardVendorName | 1.3.6.1.4.1.2011.6.139.19.1.7.1.1.9 | OCTET STRING | read-only | Description. |
| OCT hwWlanApIotCardCardType | 1.3.6.1.4.1.2011.6.139.19.1.7.1.1.10 | OCTET STRING | read-only | Description. |
| OCT hwWlanApIotCardHardwareVer | 1.3.6.1.4.1.2011.6.139.19.1.7.1.1.11 | OCTET STRING | read-only | Description. |
| OCT hwWlanApIotCardFirmwareVer | 1.3.6.1.4.1.2011.6.139.19.1.7.1.1.12 | OCTET STRING | read-only | Description. |
| OCT hwWlanApIotCardSN | 1.3.6.1.4.1.2011.6.139.19.1.7.1.1.13 | OCTET STRING | read-only | Description. |
| INT hwWlanApIotCardConnectType | 1.3.6.1.4.1.2011.6.139.19.1.7.1.1.14 | INTEGER | read-only | This object indicates the connect type of card. For the card of ethernet, when the status is mismatch, up or down do not show. |
| INT hwWlanApIotCardConnectStatus | 1.3.6.1.4.1.2011.6.139.19.1.7.1.1.15 | INTEGER | read-only | Description. |
| INT hwWlanApIotBaudRate | 1.3.6.1.4.1.2011.6.139.19.1.7.1.1.16 | INTEGER | read-only | Description. |
| OCT hwWlanApIotFrameVersion | 1.3.6.1.4.1.2011.6.139.19.1.7.1.1.17 | OCTET STRING | read-only | Description. |
| C64 hwWlanApIotCardRecvPacketsEx | 1.3.6.1.4.1.2011.6.139.19.1.7.1.1.18 | Counter64 | read-only | This object indicates the total number of frames received on iot card, which is extended to 64 bits. |
| C64 hwWlanApIotCardSendPackets | 1.3.6.1.4.1.2011.6.139.19.1.7.1.1.19 | Counter64 | read-only | This object indicates the total number of frames send on iot card, which is extended to 64 bits. |
| C64 hwWlanApIotCardRecvBytes | 1.3.6.1.4.1.2011.6.139.19.1.7.1.1.20 | Counter64 | read-only | This object indicates the total number of bytes received on iot card, which is extended to 64 bits. |
| C64 hwWlanApIotCardSendBytes | 1.3.6.1.4.1.2011.6.139.19.1.7.1.1.21 | Counter64 | read-only | This object indicates the total number of bytes send on iot card, which is extended to 64 bits. |
| INT hwWlanApIotCardAntennaStatus | 1.3.6.1.4.1.2011.6.139.19.1.7.1.1.22 | INTEGER | read-only | This object indicates the antenna status of the iot card. |
| IP hwWlanApIotCardIPv4Address | 1.3.6.1.4.1.2011.6.139.19.1.7.1.1.23 | IpAddress | read-only | This object indicates the IOT card IPv4 address. |
| OCT hwWlanApIotCardIPv6Address | 1.3.6.1.4.1.2011.6.139.19.1.7.1.1.24 | OCTET STRING | read-only | This object indicates the IOT card IPv6 address. |
| MAC hwWlanApIotCardMAC | 1.3.6.1.4.1.2011.6.139.19.1.7.1.1.25 | MacAddress | read-only | This object indicates the IOT card MAC address. |
| I32 hwWlanApIotCardCentralFreq | 1.3.6.1.4.1.2011.6.139.19.1.7.1.1.26 | Integer32 | read-only | This object indicates the IOT card central frequency. |
| I32 hwWlanApIotCardBandwidth | 1.3.6.1.4.1.2011.6.139.19.1.7.1.1.27 | Integer32 | read-only | This object indicates the IOT card bandwidth. |
| INT hwWlanApIotCardConnectServerStatus | 1.3.6.1.4.1.2011.6.139.19.1.7.1.1.28 | INTEGER | read-only | This object indicates the IOT card connect server status. |
| OCT hwWlanApIotCardServerName | 1.3.6.1.4.1.2011.6.139.19.1.7.1.1.29 | OCTET STRING | read-only | This object indicates the IOT card server name. |
| hwWlanServiceConformance | 1.3.6.1.4.1.2011.6.139.19.2 | |||
| hwWlanServiceCompliances | 1.3.6.1.4.1.2011.6.139.19.2.1 | |||
| hwWlanServiceCompliance | 1.3.6.1.4.1.2011.6.139.19.2.1.1 | Description. | ||
| hwWlanServiceObjectGroups | 1.3.6.1.4.1.2011.6.139.19.2.2 | |||
| hwWlanWdsGroup | 1.3.6.1.4.1.2011.6.139.19.2.2.1 | Description. | ||
| hwWlanMeshGroup | 1.3.6.1.4.1.2011.6.139.19.2.2.2 | Description. | ||
| hwWlanCalibrateInfoGroup | 1.3.6.1.4.1.2011.6.139.19.2.2.3 | Description. | ||
| hwWlanSpectrumReporterGroup | 1.3.6.1.4.1.2011.6.139.19.2.2.4 | Description. | ||
| hwWlanVehicleGroundFastLinkHandoverGroup | 1.3.6.1.4.1.2011.6.139.19.2.2.5 | Description. | ||
| hwWlanBLESiteInfoGroup | 1.3.6.1.4.1.2011.6.139.19.2.2.6 | Description. | ||
| hwWlanApIotCardInfoGroup | 1.3.6.1.4.1.2011.6.139.19.2.2.7 | Description. | ||
| hwWlanServiceTrapInfo | 1.3.6.1.4.1.2011.6.139.19.3 | |||
| hwWlanServiceTrap | 1.3.6.1.4.1.2011.6.139.19.3.1 | |||
| NTF hwAcConfigInconsistTrap | 1.3.6.1.4.1.2011.6.139.19.3.1.1 | Description. | ||
| NTF hwAcConfigInconsistRestoreTrap | 1.3.6.1.4.1.2011.6.139.19.3.1.2 | Description. | ||
| NTF hwWlanAeroscoutLocationViaAcTrap | 1.3.6.1.4.1.2011.6.139.19.3.1.3 | The aeroscout location(via AC) configuration is not ready. | ||
| NTF hwWlanAeroscoutLocationViaAcRestoreTrap | 1.3.6.1.4.1.2011.6.139.19.3.1.4 | The aeroscout location(via AC) configuration is ready or canceled. | ||
| hwWlanServiceTrapObjects | 1.3.6.1.4.1.2011.6.139.19.3.2 | |||
| IP hwWlanRemoteAcIP | 1.3.6.1.4.1.2011.6.139.19.3.2.1 | IpAddress | accessible-for-notify | Description. |
| OCT hwAcConfigInconsisitReason | 1.3.6.1.4.1.2011.6.139.19.3.2.2 | OCTET STRING | accessible-for-notify | Description. |
| OCT hwWlanAeroscoutExceptionReason | 1.3.6.1.4.1.2011.6.139.19.3.2.3 | OCTET STRING | accessible-for-notify | The reason for aeroscout location exception. |
RFC description
Configures WLAN access point service parameters including IoT card connectivity, mesh links, and location-based services.
Start monitoring Huawei wireless access point (WDS bridge links) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.