HUAWEI-FLASH-MAN-MIB

All MIBs › HUAWEI-FLASH-MAN-MIB

Organization: Huawei Technologies Co.,Ltd.

Last Updated: 2015-02-10

Category: Device Management, Vendor: Huawei

Description: Huawei flash management MIB for monitoring flash storage partitions, file system usage, and managing software image and configuration files.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-FLASH-MAN-MIB?

HUAWEI-FLASH-MAN-MIB is a Huawei vendor-specific module for managing on-board flash storage on Huawei routers and switches, covering flash card/partition inventory and the file operations (software image and configuration file management) performed against them. Per its stated scope it exposes objects describing flash partitions, file-system space usage, and the files stored on flash, along with operations to manage software images and configuration files. Its monitoring emphasis is on storage-health and software-state: tracking free versus used flash space warns of an impending storage-full condition that could block a configuration save or image upgrade, while the inventory of stored files lets an operator confirm which software image and configuration file versions are present and which is set to boot. It is a self-contained vendor MIB with no stated external MIB dependencies beyond standard SNMP conventions. It is deployed on Huawei routers and switches wherever an operator needs to manage flash-based storage for firmware upgrades and configuration backup/restore. Operators preparing to automate firmware upgrades across a fleet of Huawei devices typically start with a HUAWEI-FLASH-MAN-MIB download so their scripts can query flash space and stored image inventory consistently.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-FLASH-MAN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei NetEngine 8000E F2D (2025) — ultra-high-density GE-400GE converged core router announced at MWC Barcelona 2025

Monitoring Examples

Without a supplied object list, the expected scenario is polling a flash partition/file-system table for free versus total space to catch a device approaching flash exhaustion before a software upgrade or configuration save fails. An operator would also expect to enumerate stored files to confirm the correct software image version is present and marked as the active/boot image after an upgrade. Because no concrete table or object names were provided for this module, a more specific polling example cannot be responsibly constructed.

What Can Be Monitored

flash partition/storage usage
file system free/used space
stored software image inventory
configuration file inventory/status

Imported Objects

From HUAWEI-MIB

huaweiUtility

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using hwStorageSpaceFree OID:

Select a Huawei router or switch as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hwStorageSpaceFree into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the free space on this storage device, in kilobytes. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an Integer32-type OID, Value bounds is the most useful condition here — trigger an alert if free space drops below the level you'd consider safe for firmware upgrades and log retention, since running low on flash space can block config saves or upgrades. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
huaweiFlashDevice	1.3.6.1.4.1.2011.6.9.1.1
huaweiFlashManMIBObjects	1.3.6.1.4.1.2011.6.9.1
huaweiFlashMIBConformance	1.3.6.1.4.1.2011.6.9.2
huaweiFlashMIBGroups	1.3.6.1.4.1.2011.6.9.2.2
huaweiFlashNotification	1.3.6.1.4.1.2011.6.9.1.3
huaweiFlashOperate	1.3.6.1.4.1.2011.6.9.1.2
huaweiFlhFileEntry	1.3.6.1.4.1.2011.6.9.1.1.4.2.1.1		not-accessible	An entry in the table of Flash file properties for each initialized Flash partition. Each entry represents a file and gives details about the file. An entry is indexed using the device number, partition number within the device, and file number within the partition.
huaweiFlhFileTable	1.3.6.1.4.1.2011.6.9.1.1.4.2.1		not-accessible	Table of information for files in a Flash partition.
huaweiFlhOpEntry	1.3.6.1.4.1.2011.6.9.1.2.1.1		not-accessible	A Flash copy operation entry. Each entry consists of a command, a source, and optional parameters such as protocol to be used, a destination, a server address, etc. A management station wishing to create an entry should first generate a pseudo-random serial number to be used as the index to this sparse table. The station should then create the associated instance of the row status object. It must also, either in the same or in successive PDUs, create the associated instance of the command and parameter objects. It should also modify the default values for any of the parameter objects if the defaults are not appropriate. Once the appropriate instances of all the command objects have been created, either by an explicit SNMP set request or by default, the row status should be set to active to initiate the operation. Note that this entire procedure may be initiated via a single set request which specifies a row status of createAndGo as well as specifies valid values for the non-defaulted parameter objects. Once an operation has been activated, it cannot be stopped. Once the operation completes, the management station should retrieve the value of the status object (and time if desired), and delete the entry. In order to prevent old entries from clogging the table, entries will be aged out, but an entry will never be deleted within 5 minutes of completing.
huaweiFlhOpTable	1.3.6.1.4.1.2011.6.9.1.2.1		not-accessible	A table of Flash copy operation entries. Each entry represents a Flash copy operation (to or from Flash) that has been initiated.
huaweiStorageDevice	1.3.6.1.4.1.2011.6.9.1.4
hwFlash	1.3.6.1.4.1.2011.6.9			The HUAWEI-FLASH-MIB contains objects to manage the device flash cards and flash card operations. There are no constraints on this MIB.
hwFlashChips	1.3.6.1.4.1.2011.6.9.1.1.3
hwFlashEntry	1.3.6.1.4.1.2011.6.9.1.1.2.1		not-accessible	The entries of hwFlashTable.
hwFlashPartitions	1.3.6.1.4.1.2011.6.9.1.1.4
hwFlashTable	1.3.6.1.4.1.2011.6.9.1.1.2		not-accessible	This table gives the properties of all the flashes on the device .
STR hwFlhChipDescr	1.3.6.1.4.1.2011.6.9.1.1.3.1.1.3	DisplayString	read-only	The description of the flash chip. e.g. 'Intel 27F008SA'
hwFlhChipEntry	1.3.6.1.4.1.2011.6.9.1.1.3.1.1		not-accessible	The entry of hwFlhChipTable
C32 hwFlhChipEraseTimes	1.3.6.1.4.1.2011.6.9.1.1.3.1.1.7	Counter32	read-only	This object will provide a cumulative count (since last system boot up or initialization) of the number of erase retries that were done in the chip. Typically, a maximum of 2000 retries are done in a single erase zone (which may be a full chip or a portion, depending on the chip technology) before flagging an erase error. A management station is expected to get this object for each chip in a partition after an erase failure in that partition. To keep a track of retries for a given erase operation, the management station would have to retrieve the values for the concerned chips before and after any erase operation. Note that erase may be done through an independent command, or through a copy-to-flash command.
I32 hwFlhChipEraseTimesLimit	1.3.6.1.4.1.2011.6.9.1.1.3.1.1.6	Integer32	read-only	The maximum number of erase retries done within an erase sector before declaring an erase failure.
hwFlhChipGroup	1.3.6.1.4.1.2011.6.9.2.2.3			A collection of objects on chip level information.
STR hwFlhChipID	1.3.6.1.4.1.2011.6.9.1.1.3.1.1.2	DisplayString	read-only	The manufacturer and device code for a chip. The device code is in the lower byte.And The manufacturer code is in the Upper byte. Unknown chip code is presented as 00:00.
I32 hwFlhChipNum	1.3.6.1.4.1.2011.6.9.1.1.2.1.5	Integer32	read-only	The chip numbers in the flash device.
I32 hwFlhChipSerialNo	1.3.6.1.4.1.2011.6.9.1.1.3.1.1.1	Integer32	not-accessible	Index of hwFlhChipTable.
hwFlhChipTable	1.3.6.1.4.1.2011.6.9.1.1.3.1		not-accessible	Table of Flash device chip properties for each initialized Flash device. This table is meant primarily for aiding error diagnosis.
C32 hwFlhChipWriteTimes	1.3.6.1.4.1.2011.6.9.1.1.3.1.1.5	Counter32	read-only	This object will provide a cumulative count (since last system boot up or initialization) of the number of write retries that were done in the chip. If no writes have been done to Flash, the count will be zero. Typically, a maximum of 25 retries are done on a single location before flagging a write error. A management station is expected to get this object for each chip in a partition after a write failure in that partition. To keep a track of retries for a given write operation, the management station would have to retrieve the values for the concerned chips before and after any write operation. It is a cumulative count of write retries that were done in the chip.
I32 hwFlhChipWriteTimesLimit	1.3.6.1.4.1.2011.6.9.1.1.3.1.1.4	Integer32	read-only	The maximum number of write retries done at any single location before declaring a write failure.
STR hwFlhDescr	1.3.6.1.4.1.2011.6.9.1.1.2.1.6	DisplayString	read-only	Description of the purpose of the flash device on the system.
OCT hwFlhFileChecksum	1.3.6.1.4.1.2011.6.9.1.1.4.2.1.1.5	OCTET STRING	read-only	The file checksum located in the header of file.
hwFlhFileGroup	1.3.6.1.4.1.2011.6.9.2.2.5			A collection of objects on file level information.
I32 hwFlhFileIndex	1.3.6.1.4.1.2011.6.9.1.1.4.2.1.1.1	Integer32	not-accessible	The index of the table .
STR hwFlhFileName	1.3.6.1.4.1.2011.6.9.1.1.4.2.1.1.2	DisplayString	read-only	A valid file name supported by the file system.
hwFlhFiles	1.3.6.1.4.1.2011.6.9.1.1.4.2
I32 hwFlhFileSize	1.3.6.1.4.1.2011.6.9.1.1.4.2.1.1.3	Integer32	read-only	The file size in bytes, which doesn't include the file header of filesystem. The minimum value of it will be 1.
INT hwFlhFileStatus	1.3.6.1.4.1.2011.6.9.1.1.4.2.1.1.4	INTEGER	read-only	The status maybe follows: deleted(1):The file is in recycle. checksumWrong(2):The checksum of file is invalid; valid(3):A valid file.
TIM hwFlhFileTime	1.3.6.1.4.1.2011.6.9.1.1.4.2.1.1.6	TimeStamp	read-only	The file checksum located in the header of file.
hwFlhGroup	1.3.6.1.4.1.2011.6.9.2.2.1			A collection of objects on Flash device level information.
I32 hwFlhIndex	1.3.6.1.4.1.2011.6.9.1.1.2.1.1	Integer32	read-only	The index of hwFlashTable. It has the minimum value of 1, and maximum value of the same as the value of hwFlhSupportNum.
TIM hwFlhInitTime	1.3.6.1.4.1.2011.6.9.1.1.2.1.8	TimeStamp	read-only	The system time at which device was initialized. For fixed devices, this will be the system's boot up time. For removable devices, it will be the time at which the device was inserted. It may be a later time if device was inserted later. If a device can be partitioned and repartitioned, it will be the time of repartitioning.
I32 hwFlhMaxPartitions	1.3.6.1.4.1.2011.6.9.1.1.2.1.13	Integer32	read-only	The maximum count of partitions which the system supports for this Flash device.If hwFlhPartitionBool is false, the object value is 1.
hwFlhMIBCompliance	1.3.6.1.4.1.2011.6.9.2.1.1			The compliance statement for entities that support the huawei Flash MIB.
hwFlhMIBCompliances	1.3.6.1.4.1.2011.6.9.2.1
I32 hwFlhMinPartitionSize	1.3.6.1.4.1.2011.6.9.1.1.2.1.12	Integer32	read-only	Minimum partition size the device supported. If hwFlhDevicePartitionBool is false, the value of this object is the same as hwFlhDeviceSize.
STR hwFlhName	1.3.6.1.4.1.2011.6.9.1.1.2.1.4	DisplayString	read-only	The flash device name used to refer to the device within the system.
hwFlhNotificationGroup	1.3.6.1.4.1.2011.6.9.2.2.7			The collection of notifications in the module
hwFlhOperationGroup	1.3.6.1.4.1.2011.6.9.2.2.6			A collection of objects of flash operations.
STR hwFlhOperDestinationFile	1.3.6.1.4.1.2011.6.9.1.2.1.1.8	DisplayString	read-create	Specifies the destination file name to be transferred . It may be located on flash or remote server. It may include the file path if it is applicable. If it is not specified , the destination file name is the same as source file name for application.
T/F hwFlhOperEndNotification	1.3.6.1.4.1.2011.6.9.1.2.1.1.10	TruthValue	read-create	If the value of it is specified 'true',a notification will be generated at the end of the operation. Otherwise no notification will be generated.
STR hwFlhOperErrorReason	1.3.6.1.4.1.2011.6.9.1.2.1.1.20	DisplayString	read-only	The failure reason of operation.
I32 hwFlhOperIndex	1.3.6.1.4.1.2011.6.9.1.2.1.1.1	Integer32	not-accessible	Specifies the index of an entry. It is a random value when creating an entry.
I32 hwFlhOperMemSize	1.3.6.1.4.1.2011.6.9.1.2.1.1.16	Integer32	read-create	This object specifies the reserved space (in KBs) guaranteed by a host. The value 0 indicates that no space need be reserved. The default value is 0. This object is optional when hwFlhOperType is specified as net2FlashWithErase or net2FlashWithoutErase in the Set operation. This object is unavailable when hwFlhOperType is specified as flash2Net or delete in the Set operation.
NTF hwFlhOperNotification	1.3.6.1.4.1.2011.6.9.1.3.1			A hwFlhOperNotification is sent only when hwFlhOperEndNotification is true.
STR hwFlhOperPassword	1.3.6.1.4.1.2011.6.9.1.2.1.1.6	DisplayString	read-create	Remote user password for copy via ftp protocol. Optional. This object will be ignored for protocols other than ftp and sftp.
TIK hwFlhOperProgress	1.3.6.1.4.1.2011.6.9.1.2.1.1.11	TimeTicks	read-only	The progress described as the time taken for the operation.
INT hwFlhOperProtocol	1.3.6.1.4.1.2011.6.9.1.2.1.1.3	INTEGER	read-create	Specifies the protocol used to transfer file. The default value of it is ftp. When hwFlhOperProtocol is specified as SFTP, only password authentication-type is valid.
ROW hwFlhOperRowStatus	1.3.6.1.4.1.2011.6.9.1.2.1.1.12	RowStatus	read-create	The status of this table entry. When the status is active : (1) In the situation that the specified transfer operation by ftp/tftp is in progress, the transfer operation will be aborted if the status is set to notInService. (2) In any other situations, the specified operation will not be aborted even if the status is set to notInService.
IP hwFlhOperServerAddress	1.3.6.1.4.1.2011.6.9.1.2.1.1.4	IpAddress	read-create	The address of remote host acting as server for any operation.
OCT hwFlhOperServerIpv6Address	1.3.6.1.4.1.2011.6.9.1.2.1.1.21	OCTET STRING	read-create	The address of remote host acting as Ipv6 server for any operation.
I32 hwFlhOperServerPort	1.3.6.1.4.1.2011.6.9.1.2.1.1.13	Integer32	read-create	This object specifies the SFTP/FTP server port that is used for file transfer only if the value of hwFlhOperProtocol is sftp/ftp. The default SFTP server port is 22 if no port is specified. The default FTP server port is 21 if no port is specified. If the value of hwFlhOperProtocol is not sftp/ftp, this object is ignored by the implementation.
STR hwFlhOperServerUser	1.3.6.1.4.1.2011.6.9.1.2.1.1.5	DisplayString	read-create	When use ftp or sftp to transfer files, the user name must be specified by this node.
IP hwFlhOperSourceAddress	1.3.6.1.4.1.2011.6.9.1.2.1.1.14	IpAddress	read-create	The source IP address. When hwFlhOperType is specified as net2FlashWithErase, net2FlashWithoutErase or flash2Net, the source IP address of the client may be specified or not. Default is 0.0.0.0 . If the source type is set to both of IP address and interface, the former has the priority.
STR hwFlhOperSourceFile	1.3.6.1.4.1.2011.6.9.1.2.1.1.7	DisplayString	read-create	Specifies the Source file name to be transferred . It may be located on flash or remote server. It may include the file path if it is applicable. It must be specified.
OCT hwFlhOperSourceInterface	1.3.6.1.4.1.2011.6.9.1.2.1.1.15	OCTET STRING	read-create	The name of the source interface.When hwFlhOperType is specified as net2FlashWithErase,net2FlashWithoutErase or flash2Net,the source interface of the FTP/TFTP client may be specified or not. If the source type is set to both of IP address and interface,the former has the priority.
HWF hwFlhOperStatus	1.3.6.1.4.1.2011.6.9.1.2.1.1.9	HwFlashOperationStatus	read-only	The status of operation. The status of the specified operation can be one of the follows. opInProgress(1) : the operation is in process. opSuccess(2) : the operation has been completed successfully. opInvalid(3) : the command is invalid or command-protocol-device combination is unsupported by the system. opInvalidProtocol(4) :invalid protocol is specified opInvalidSourceName(5) :invalid source file name is specified. opInvalidDestName(6) :invalid target name is specified. opInvalidServerAddress(7) :invalid server address is specified opDeviceBusy(8) :the device is in use and locked by another process opDeviceOpenError(9) :invalid device name is specified. opDeviceError(10) : device read, write or erase error opDeviceNotProgrammable(11) :device is read-only but a write or erase operation was specified opDeviceFull(12) : device is filled to capacity opFileOpenError(13) :invalid file name; file not found in partition opFileTransferError(14) :file transfer was unsuccessfull opFileChecksumError(15) :file checksum in Flash si invalid opNoMemory(16) :system is running in low on memory opAuthFail(17) :authentication failure opUnknownFailure(18) :failure which is unknown opAbort(19) : transfer operation has been aborted opInvalidSourceAddress(20) : invalid source IP is specified. opInvalidSourceInterface(21) : invalid source interface is specified. opCurrentVersionFileConfilt(22) : conflict between target file and system file
I32 hwFlhOperTotalFileLength	1.3.6.1.4.1.2011.6.9.1.2.1.1.18	Integer32	read-create	The total length of the file, in bytes.
I32 hwFlhOperTransferProgress	1.3.6.1.4.1.2011.6.9.1.2.1.1.19	Integer32	read-only	The transfer progress of the file.
INT hwFlhOperType	1.3.6.1.4.1.2011.6.9.1.2.1.1.2	INTEGER	read-create	Specifies the operation to be executed. net2FlashWithErase Copy a file to flash; erase flash before copy. Use the FTP protocol or SFTP protocol. net2FlashWithoutErase Same with net2FlashWithErase. flash2Net Copy a file from flash using the FTP protocol or SFTP protocol. delete delete file or directory by source file name.
OCT hwFlhOperVpnInstanceName	1.3.6.1.4.1.2011.6.9.1.2.1.1.17	OCTET STRING	read-create	The vpn instance name of the file server.
INT hwFlhPartChecksumMethod	1.3.6.1.4.1.2011.6.9.1.1.4.1.1.7	INTEGER	read-only	The Checksum algorithm identifier checksum method which the file system uses.
I32 hwFlhPartFileNameLen	1.3.6.1.4.1.2011.6.9.1.1.4.1.1.12	Integer32	read-only	The maximum length of file name in the system.
I32 hwFlhPartFileNum	1.3.6.1.4.1.2011.6.9.1.1.4.1.1.6	Integer32	read-only	The number of all the file in the flash partition.
I32 hwFlhPartFirstChip	1.3.6.1.4.1.2011.6.9.1.1.4.1.1.2	Integer32	read-only	The first chip's sequence number in the partition, by which a chip can be indexed in chip table.
I32 hwFlhPartIndex	1.3.6.1.4.1.2011.6.9.1.1.4.1.1.1	Integer32	not-accessible	The one of indexes which specifies a partition in system. It is the sequence number of partitions.
T/F hwFlhPartitionBool	1.3.6.1.4.1.2011.6.9.1.1.2.1.11	TruthValue	read-write	The object indicates whether the flash indexed can be partitioned or not. The true(1) value indicates the flash device CAN be partitioned. The false(2) value indicates the flash device CANNOT be partitioned.The actual partition state depends on the value of hwFlhDevicePartions.
hwFlhPartitionEntry	1.3.6.1.4.1.2011.6.9.1.1.4.1.1		not-accessible	An entry in the table of flash partition properties for each initialized flash partition. Each entry will be indexed by a device number and a partition number within the device.
hwFlhPartitionGroup	1.3.6.1.4.1.2011.6.9.2.2.4			A collection of objects providing on partition level information.
I32 hwFlhPartitionNum	1.3.6.1.4.1.2011.6.9.1.1.2.1.14	Integer32	read-only	The actual number of partitions supported by the system for this Flash device.If hwFlhPartitionBool is false, the object value is 1.
hwFlhPartitionTable	1.3.6.1.4.1.2011.6.9.1.1.4.1		not-accessible	Table of flash device partition properties for each initialized flash partition. Whenever there is no explicit partitioning done, a single partition spanning the entire device will be assumed to exist. There will therefore always be at least one partition on a device.
I32 hwFlhPartLastChip	1.3.6.1.4.1.2011.6.9.1.1.4.1.1.3	Integer32	read-only	The last chip's sequence number in the partition, by which a chip can be indexed in chip table.
STR hwFlhPartName	1.3.6.1.4.1.2011.6.9.1.1.4.1.1.10	DisplayString	read-only	The name of flash partition. It was referred by the system.
T/F hwFlhPartRequireErase	1.3.6.1.4.1.2011.6.9.1.1.4.1.1.11	TruthValue	read-only	Indicates whether the partition of flash needed to be erased or not before write operation on it.
I32 hwFlhPartSpace	1.3.6.1.4.1.2011.6.9.1.1.4.1.1.4	Integer32	read-only	The total space of the flash partition. The following should be satisfied: hwFlhPartSpace = n*hwFlhMinPartitionSize
G32 hwFlhPartSpaceFree	1.3.6.1.4.1.2011.6.9.1.1.4.1.1.5	Gauge32	read-only	The Flash partition's free space.
HWF hwFlhPartStatus	1.3.6.1.4.1.2011.6.9.1.1.4.1.1.8	HwFlashPartitionStatus	read-only	The flash partition status. If device is not programmable the value of it will be 'readOnly(1)'; If the current image is running from this partition, the value of it will be 'runFromFlash(2)'; If device is programmable the value of it will be 'readWrite(3) '.
HWF hwFlhPartUpgradeMode	1.3.6.1.4.1.2011.6.9.1.1.4.1.1.9	HwFlashPartitionUpgradeMode	read-only	The upgrade method of Flash partition, ie., method by which new files can be downloaded into the partition. FLH stands for Flash Load Helper, a feature provided on run-from-Flash systems for upgrading Flash. This feature uses the bootstrap code in ROMs to help in automatic download. This object should be retrieved if the partition status is runFromFlash(2). If the partition status is readOnly(1), the upgrade method would depend on the reason for the readOnly status. For eg., it may simply be a matter of installing the programming jumper, or it may require execution of a later version of software that supports the Flash chips. unknown(1) - the current system image does not know how Flash can be programmed. A possible method would be to reload the ROM image and perform the upgrade manually. rxbootFLH(2) - the Flash Load Helper is available to download files to Flash. A copy-to-flash command can be used and this system image will automatically reload the Rxboot image in ROM and direct it to carry out the download request. direct(3) - will be done directly by this image.
I32 hwFlhPos	1.3.6.1.4.1.2011.6.9.1.1.2.1.3	Integer32	read-only	The position of the flash device on the system.This object is an index of entPhysicalTable in ENTITY-MIB . If the value of this object is 0, the main processor is indicated.
T/F hwFlhRemovable	1.3.6.1.4.1.2011.6.9.1.1.2.1.9	TruthValue	read-only	The object indicates whether the flash indexed can be removed or not. The true(1) value indicates the flash device CAN be removed .The false(2) value indicates the flash device CANNOT be removed .
I32 hwFlhSize	1.3.6.1.4.1.2011.6.9.1.1.2.1.2	Integer32	read-only	Specifies the total size of the Flash device indexed by hwFlhIndex. The value will be zero if the flash is removed for a removable device.
I32 hwFlhSupportNum	1.3.6.1.4.1.2011.6.9.1.1.1	Integer32	read-only	Specifies the total number of flash which the system supported. The MIB should not be loaded if there is no flash on the device, therefore the value of the object is at least 1.
STR hwFlhSyncDestinationFile	1.3.6.1.4.1.2011.6.9.1.2.2.1.7	DisplayString	read-create	The destination file name to be transferred . It is combine with the hwFlhSyncDestinationPath to specify the absolute file name. It must be specified.
STR hwFlhSyncDestinationPath	1.3.6.1.4.1.2011.6.9.1.2.2.1.6	DisplayString	read-create	The destination board path to be transferred. It must be specified.
hwFlhSyncEntry	1.3.6.1.4.1.2011.6.9.1.2.2.1		not-accessible	A Flash synchronize operation entry. Each entry consists of a synchronize command, such as copy,delete etc.
NTF hwFlhSyncFailNotification	1.3.6.1.4.1.2011.6.9.1.3.3			A hwFlhSyncFailNotification is sent when the file copy operation failed.
I32 hwFlhSyncIndex	1.3.6.1.4.1.2011.6.9.1.2.2.1.1	Integer32	not-accessible	Specifies the index of an entry. It is a random value when creating an entry.
INT hwFlhSyncRange	1.3.6.1.4.1.2011.6.9.1.2.2.1.3	INTEGER	read-create	Synchronize operation range to be executed. designate Net designate a object to be handled as synchronize destination; all Net make all chassis and all board as handled object;
ROW hwFlhSyncRowStatus	1.3.6.1.4.1.2011.6.9.1.2.2.1.8	RowStatus	read-create	The row status of this table entry.
STR hwFlhSyncSourceFile	1.3.6.1.4.1.2011.6.9.1.2.2.1.5	DisplayString	read-create	The source file name to be transferred . It is located on the flash of the mainboard of a chassis. It is combine with the hwFlhSyncSourcePath to specify the absolute file name. It must be specified.
STR hwFlhSyncSourcePath	1.3.6.1.4.1.2011.6.9.1.2.2.1.4	DisplayString	read-create	The source board path to be transferred. It must be specified.
NTF hwFlhSyncSuccessNotification	1.3.6.1.4.1.2011.6.9.1.3.2			A hwFlhSyncSuccessNotification is sent when the file copy operation successful.
hwFlhSyncTable	1.3.6.1.4.1.2011.6.9.1.2.2		not-accessible	A table of Flash synchronize operate include copy/delete etc.
INT hwFlhSyncType	1.3.6.1.4.1.2011.6.9.1.2.2.1.2	INTEGER	read-create	Synchronize operation type to be executed. net2FlashCopy Net operate copy a file from one board to another;
STR hwStorageDescr	1.3.6.1.4.1.2011.6.9.1.4.2.1.6	DisplayString	read-only	Description of the purpose of the storage devices on the system.
hwStorageEntry	1.3.6.1.4.1.2011.6.9.1.4.2.1		not-accessible	The entries of hwStorageTable.
hwStorageGroup	1.3.6.1.4.1.2011.6.9.2.2.8			Description.
I32 hwStorageIndex	1.3.6.1.4.1.2011.6.9.1.4.2.1.1	Integer32	not-accessible	The index of hwStorageTable. It has the minimum value of 1.
STR hwStorageName	1.3.6.1.4.1.2011.6.9.1.4.2.1.5	DisplayString	read-only	The storage devices name used to refer to the device within the system.
I32 hwStorageSpace	1.3.6.1.4.1.2011.6.9.1.4.2.1.3	Integer32	read-only	Specifies the total size of the storage devices indexed by hwStorageTable.
I32 hwStorageSpaceFreeEx	1.3.6.1.4.1.2011.6.9.1.4.2.1.4	Integer32	read-only	The free space of the storage devices.
hwStorageTable	1.3.6.1.4.1.2011.6.9.1.4.2		not-accessible	This table gives the properties of all the storage devices on the device .
INT hwStorageType	1.3.6.1.4.1.2011.6.9.1.4.2.1.2	INTEGER	read-only	The type of all the storage devices on the device

RFC description

Huawei vendor-private MIB for managing flash memory devices on network equipment.

Start monitoring Huawei router or switch (flash storage/software-image management) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-FLASH-MAN-MIB