HUAWEI-FR-MIB

All MIBs › HUAWEI-FR-MIB

Organization: Huawei Technologies Co.,Ltd.

Last Updated: 2010-09-10

Category: Domain: WAN, Frame Relay, Vendor: Huawei

Description: Huawei Frame Relay MIB for managing Frame Relay PVCs, LMI configuration, congestion notification, and interface statistics on Huawei WAN equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-FR-MIB?

HUAWEI-FR-MIB is a Huawei MIB for managing Frame Relay interfaces, covering permanent virtual circuit (PVC) configuration, LMI signaling, congestion notification, and interface statistics. It exposes both configuration data (PVC/DLCI setup, LMI type) and operational/performance data such as PVC status and congestion counters, placing it in the WAN interface status and performance-monitoring category. Monitoring it is about hardware/link status: whether a PVC is active or has gone down, whether LMI keepalives are being exchanged with the far end, and whether FECN/BECN congestion indicators or discard counts show a link under sustained congestion. It extends the standard Frame Relay DTE MIB concepts from RFC 2115 with Huawei-specific enhancements. It is deployed on Huawei WAN routers terminating legacy Frame Relay circuits in enterprise or carrier access networks, where a HUAWEI-FR-MIB download lets administrators load the module into a MIB browser for monitoring.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-FR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei WAN routers with Frame Relay interfaces

Monitoring Examples

Polling the PVC table lets an operator see each PVC's DLCI and operational status alongside FECN/BECN congestion counters and discard statistics, revealing when a PVC has gone inactive or when the Frame Relay link is congested enough to be dropping subscriber traffic.

What Can Be Monitored

PVC operational status
DLCI configuration
LMI signaling status
FECN/BECN congestion counters
frame relay error/discard statistics

Imported Objects

From HUAWEI-MIB

hwDatacomm

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwFrMIB	1.3.6.1.4.1.2011.5.25.168			This MIB is mainly used to indicate the information of Fr interface
hwFrObjects	1.3.6.1.4.1.2011.5.25.168.1
hwFrTable	1.3.6.1.4.1.2011.5.25.168.1.1		not-accessible	This table is used to indicate the parameters of the Fr interface. The index of this table is hwFrIfIndex.
hwFrEntry	1.3.6.1.4.1.2011.5.25.168.1.1.1		not-accessible	This table is used to indicate the parameters of the Fr interface. The index of this entry is hwFrIfIndex.
NUM hwFrIfIndex	1.3.6.1.4.1.2011.5.25.168.1.1.1.1	InterfaceIndex	not-accessible	Indicates the interface index.
INT hwFrEncapType	1.3.6.1.4.1.2011.5.25.168.1.1.1.2	INTEGER	read-only	Indicates the interface fr encapsulation type. Options: 1.nonstandard(1) - nonstandard encapsulation 2.ietf(2) - RFC1490 encapsulation
INT hwFrIfType	1.3.6.1.4.1.2011.5.25.168.1.1.1.3	INTEGER	read-only	Indicates fr interface type. Options: 1.dte(1) - DTE type 2.dce(2) - DCE type 3.nni(3) - NNI type
INT hwFrLmiType	1.3.6.1.4.1.2011.5.25.168.1.1.1.4	INTEGER	read-only	Indicates the Lmi protocol type. Options: 1.notset(1) - NotSet 2.nonstandard(2) - nonstandard type 3.ansi(3) - ANSI type 4.q933a(4) - Q.933a type
I32 hwFrLmiN391DteValue	1.3.6.1.4.1.2011.5.25.168.1.1.1.5	Integer32	read-only	Indicates the parameter of DTE N391. Get 65535 when the fr interface type is DCE. Range: 1-255 Default: 6 Unit: count
I32 hwFrLmiN392DteValue	1.3.6.1.4.1.2011.5.25.168.1.1.1.6	Integer32	read-only	Indicates the parameter of DTE N392. Get 65535 when the fr interface type is DCE. Range: 1-10 Default: 3 Unit: count
I32 hwFrLmiN392DceValue	1.3.6.1.4.1.2011.5.25.168.1.1.1.7	Integer32	read-only	Indicates the parameter of DCE N392. Get 65535 when the fr interface type is DTE. Range: 1-10 Default: 3 Unit: count
I32 hwFrLmiN393DteValue	1.3.6.1.4.1.2011.5.25.168.1.1.1.8	Integer32	read-only	Indicates the parameter of DTE N393. Get 65535 when the fr interface type is DCE. Range: 1-10 Default: 4 Unit: count
I32 hwFrLmiN393DceValue	1.3.6.1.4.1.2011.5.25.168.1.1.1.9	Integer32	read-only	Indicates the parameter of DCE N393. Get 65535 when the fr interface type is DTE. Range: 1-10 Default: 4 Unit: count
I32 hwFrLmiT391DteValue	1.3.6.1.4.1.2011.5.25.168.1.1.1.10	Integer32	read-only	Indicates the parameter of DTE T391. Get 65535 when the fr interface type is DCE. Range: 1-32767 Default: 10 Unit: second
I32 hwFrLmiT392DceValue	1.3.6.1.4.1.2011.5.25.168.1.1.1.11	Integer32	read-only	Indicates the parameter of DCE T392. Get 65535 when the fr interface type is DTE. Range: 5-30 Default: 15 Unit: second
T/F hwFrIphcEnable	1.3.6.1.4.1.2011.5.25.168.1.1.1.12	TruthValue	read-only	Indicates IPHC is enabled or disabled. By default, RTP header compression with IPHC format is disabled. true: enable RTP header compression with IPHC format. false: disable RTP header compression with IPHC format.
T/F hwFrIphcNonstandardFormat	1.3.6.1.4.1.2011.5.25.168.1.1.1.13	TruthValue	read-only	Indicates nonstandard-format compressing is enabled or disabled. By default, don't support nonstandard-format while compressing. true: support nonstandard-format while compressing. false: don't support nonstandard-format while compressing.
T/F hwFrIphcTcpInclude	1.3.6.1.4.1.2011.5.25.168.1.1.1.14	TruthValue	read-only	Indicates TCP header compression is enabled or disabled. By default, exclude TCP header compression while compressing RTP. true: include TCP header compression while compressing RTP. false: exclude TCP header compression while compressing RTP.
T/F hwFrInarpEnable	1.3.6.1.4.1.2011.5.25.168.1.1.1.15	TruthValue	read-only	Indicates inverse address resolution protocol is enabled or disabled. By default, inverse address resolution protocol is enabled. true: inverse address resolution protocol is enabled. false: inverse address resolution protocol is disabled.
I32 hwFrIphcTcpConnection	1.3.6.1.4.1.2011.5.25.168.1.1.1.16	Integer32	read-only	Indicates the number of tcp compression connections. 256 is a valid connection number, get 256 when IPHC is enabled. Get 65535 when IPHC is disabled. Range: 3-255 Default: 256 Unit: count
I32 hwFrIphcRtpConnection	1.3.6.1.4.1.2011.5.25.168.1.1.1.17	Integer32	read-only	Indicates the number of rtp compression connections. 256 is a valid connection number, get 256 when IPHC is enabled. Get 65535 when IPHC is disabled. Range: 3-255 Default: 256 Unit: count
hwFrPvcTable	1.3.6.1.4.1.2011.5.25.168.1.2		not-accessible	This table is used to indicate the PVC for the Fr interface. The index of this table are hwFrPvcIfIndex and hwFrPvcDlciNumber.
hwFrPvcEntry	1.3.6.1.4.1.2011.5.25.168.1.2.1		not-accessible	This table is used to indicate the PVC for the Fr interface. The index of this entry are hwFrPvcIfIndex and hwFrPvcDlciNumber.
NUM hwFrPvcIfIndex	1.3.6.1.4.1.2011.5.25.168.1.2.1.1	InterfaceIndex	not-accessible	Indicates the interface index.
I32 hwFrPvcDlciNumber	1.3.6.1.4.1.2011.5.25.168.1.2.1.2	Integer32	read-only	Indicates the Dlci number.
INT hwFrPvcState	1.3.6.1.4.1.2011.5.25.168.1.2.1.3	INTEGER	read-only	Indicates the state of the PVC. Options: 1.inactive(1) - inactive 2.active(2) - active
T/F hwFrPvcInarpEnable	1.3.6.1.4.1.2011.5.25.168.1.2.1.4	TruthValue	read-only	Indicates the inarp is enabled or disabled. By default, the inarp of the PVC is enabled. true: enable inarp. false: disable inarp.
hwFrPvcGroupTable	1.3.6.1.4.1.2011.5.25.168.1.3		not-accessible	This table is used to indicate the pvc-group on the interface. The index of this table are hwFrPvcGroupIfIndex and hwFrPvcGroupName.
hwFrPvcGroupEntry	1.3.6.1.4.1.2011.5.25.168.1.3.1		not-accessible	This table is used to indicate the pvc-group on the interface. The index of this entry are hwFrPvcGroupIfIndex and hwFrPvcGroupName.
NUM hwFrPvcGroupIfIndex	1.3.6.1.4.1.2011.5.25.168.1.3.1.1	InterfaceIndex	not-accessible	Indicates the interface index.
OCT hwFrPvcGroupName	1.3.6.1.4.1.2011.5.25.168.1.3.1.2	OCTET STRING	read-only	Indicates the name of the pvc-group. The name is a string of 1 to 16 characters. Only support visible characters.
INT hwFrPvcGroupState	1.3.6.1.4.1.2011.5.25.168.1.3.1.3	INTEGER	read-only	Indicates the state of a pvc-group. Options: 1.inactive(1) - inactive 2.active(2) - active
INT hwFrPvcGroupTosType	1.3.6.1.4.1.2011.5.25.168.1.3.1.4	INTEGER	read-only	Indicates the TOS type of a pvc-group. Options: 1.none(1) - none 2.precedence(2) - precedence 3.dscp(3) - DSCP
T/F hwFrPvcGroupInArpEnable	1.3.6.1.4.1.2011.5.25.168.1.3.1.5	TruthValue	read-only	Indicates inarp is enabled or disabled. By default, the inarp of the pvc-group is enabled. true: enable inarp. false: disable inarp.
hwFrPvcGroupMemTable	1.3.6.1.4.1.2011.5.25.168.1.4		not-accessible	This table is used to indicate the member of the pvc-group. The index of this table are hwFrPvcGroupMemIfIndex, hwFrPvcGroupMemPvcGroupName and hwFrPvcGroupMemDlciNumber.
hwFrPvcGroupMemEntry	1.3.6.1.4.1.2011.5.25.168.1.4.1		not-accessible	This table is used to indicate the member of the pvc-group. The index of this entry are hwFrPvcGroupMemIfIndex, hwFrPvcGroupMemPvcGroupName and hwFrPvcGroupMemDlciNumber.
NUM hwFrPvcGroupMemIfIndex	1.3.6.1.4.1.2011.5.25.168.1.4.1.1	InterfaceIndex	not-accessible	Indicates the interface index.
OCT hwFrPvcGroupMemPvcGroupName	1.3.6.1.4.1.2011.5.25.168.1.4.1.2	OCTET STRING	read-only	Indicates the name of the pvc-group. The name is a string of 1 to 16 characters. Only support visible characters.
I32 hwFrPvcGroupMemDlciNumber	1.3.6.1.4.1.2011.5.25.168.1.4.1.3	Integer32	read-only	Indicates the DLCI of the PVC.
INT hwFrPvcGroupMemTosType	1.3.6.1.4.1.2011.5.25.168.1.4.1.4	INTEGER	read-only	Indicates the TOS type of a PVC belong to the pvc-group. Options: 1.none(1) - none 2.precedence(2) - precedence 3.dscp(3) - DSCP
T/F hwFrPvcGroupMemDefault	1.3.6.1.4.1.2011.5.25.168.1.4.1.5	TruthValue	read-only	Indicates the TOS value of the PVC whether is default or not. true: default TOS value. false: none default TOS value.
I32 hwFrPvcGroupMemMinGrade	1.3.6.1.4.1.2011.5.25.168.1.4.1.6	Integer32	read-only	Indicates the minimum value of the TOS with one member PVC. If the TOS type is precedence, the maximum value cannot be larger than 7. Get 255 when this value is not configed.
I32 hwFrPvcGroupMemMaxGrade	1.3.6.1.4.1.2011.5.25.168.1.4.1.7	Integer32	read-only	Indicates the maximum value of the TOS with one member PVC. If the TOS type is precedence, the maximum value cannot be larger than 7. Get 255 when this value is not configed.
hwFrPvcGroupMapIpTable	1.3.6.1.4.1.2011.5.25.168.1.5		not-accessible	This table is used to indicate the bridge mapping on the pvc-group. The index of this table are hwFrPvcGroupMapIpIfIndex, hwFrPvcGroupMapIpName and hwFrPvcGroupMapIpIpAddr.
hwFrPvcGroupMapIpEntry	1.3.6.1.4.1.2011.5.25.168.1.5.1		not-accessible	This table is used to indicate the bridge mapping on the pvc-group. The index of this entry are hwFrPvcGroupMapIpIfIndex, hwFrPvcGroupMapIpName and hwFrPvcGroupMapIpIpAddr.
NUM hwFrPvcGroupMapIpIfIndex	1.3.6.1.4.1.2011.5.25.168.1.5.1.1	InterfaceIndex	not-accessible	Indicates the interface index.
OCT hwFrPvcGroupMapIpName	1.3.6.1.4.1.2011.5.25.168.1.5.1.2	OCTET STRING	read-only	Indicates the name of the pvc-group. The name is a string of 1 to 16 characters.
IP hwFrPvcGroupMapIpIpAddr	1.3.6.1.4.1.2011.5.25.168.1.5.1.3	IpAddress	read-only	Indicates the peer IP address mapped to the pvc-group. Get 0.0.0.0 when the map is default map.
IP hwFrPvcGroupMapIpMask	1.3.6.1.4.1.2011.5.25.168.1.5.1.4	IpAddress	read-only	Indicates the IP address mask mapped to the pvc-group. Get 255.255.255.255 when the map is default map.
INT hwFrPvcGroupMapIpEncapType	1.3.6.1.4.1.2011.5.25.168.1.5.1.5	INTEGER	read-only	Indicates the encapsulation type of the PVC mapped by pvc-group. 1.nonstandard(1) - nonstandard encapsulation 2.ietf(2) - RFC1490 encapsulation
T/F hwFrPvcGroupMapIpBroadcast	1.3.6.1.4.1.2011.5.25.168.1.5.1.6	TruthValue	read-only	Indicates sending broadcast packets is enabled or disabled. By default, sending broadcast packets is disabled. true: enable sending broadcast packets. false: disable sending broadcast packets.
T/F hwFrPvcGroupMapIpDefault	1.3.6.1.4.1.2011.5.25.168.1.5.1.7	TruthValue	read-only	Indicates the map is default map or not. By default, the map is not default map. true: the map is default map. false: the map is not default map.
hwFrMapIpTable	1.3.6.1.4.1.2011.5.25.168.1.6		not-accessible	This table is used to indicate the static address mapping for a PVC. The index of this table are hwFrMapIpIfIndex, hwFrMapIpDlciNumber and hwFrMapIpAddress.
hwFrMapIpEntry	1.3.6.1.4.1.2011.5.25.168.1.6.1		not-accessible	This table is used to indicate the static address mapping for a PVC. The index of this entry are hwFrMapIpIfIndex, hwFrMapIpDlciNumber and hwFrMapIpAddress.
NUM hwFrMapIpIfIndex	1.3.6.1.4.1.2011.5.25.168.1.6.1.1	InterfaceIndex	not-accessible	Indicates the interface index.
I32 hwFrMapIpDlciNumber	1.3.6.1.4.1.2011.5.25.168.1.6.1.2	Integer32	read-only	Indicates the Dlci number.
IP hwFrMapIpAddress	1.3.6.1.4.1.2011.5.25.168.1.6.1.3	IpAddress	read-only	Indicates the peer IP address mapped to the PVC. Get 0.0.0.0 when the map is default map.
IP hwFrMapIpMask	1.3.6.1.4.1.2011.5.25.168.1.6.1.4	IpAddress	read-only	Indicates the IP address mask. Get 255.255.255.255 when the map is default map.
T/F hwFrMapIpBroadcast	1.3.6.1.4.1.2011.5.25.168.1.6.1.5	TruthValue	read-only	Indicates sending broadcast packets is enabled or disabled. By default, sending broadcast packets is disabled. true: enable sending broadcast packets. false: disable sending broadcast packets.
INT hwFrMapIpEncapType	1.3.6.1.4.1.2011.5.25.168.1.6.1.6	INTEGER	read-only	Indicates the encapsulation type of map. Option: 1.nonstandard(1) - nonstandard encapsulation 2.ietf(2) - RFC1490 encapsulation
T/F hwFrMapIpDefault	1.3.6.1.4.1.2011.5.25.168.1.6.1.7	TruthValue	read-only	Indicates the map is default map or not. By default, the map is not default map. true: the map is default map. false: the map is not default map.
T/F hwFrMapIpFrf9Enable	1.3.6.1.4.1.2011.5.25.168.1.6.1.8	TruthValue	read-only	Indicates frf9 on the map is enabled or disabled. By default, payload data compression is disabled. true: enable payload data compression. false: disable payload data compression.
T/F hwFrMapIpIphcEnable	1.3.6.1.4.1.2011.5.25.168.1.6.1.9	TruthValue	read-only	Indicates iphc on the map is enabled or disabled. By default, compress IP/UDP/RTP head with iphc-compression is disabled. true: enable compress IP/UDP/RTP head with iphc-compression. false: disable compress IP/UDP/RTP head with iphc-compression.
I32 hwFrMapIpRtpConnNumber	1.3.6.1.4.1.2011.5.25.168.1.6.1.10	Integer32	read-only	Indicates the number of rtp compression connections. Get 65535 when IPHC is disabled. Range: 3-256 Default: 65535 Unit: count
hwFrMapPppTable	1.3.6.1.4.1.2011.5.25.168.1.7		not-accessible	This table is used to indicate the PPPoFR mapping on the PVC. The index of this table are hwFrMapPppIfIndex and hwFrMapPppDlciNumber.
hwFrMapPppEntry	1.3.6.1.4.1.2011.5.25.168.1.7.1		not-accessible	This table is used to indicate the PPPoFR mapping on the PVC. The index of this entry are hwFrMapPppIfIndex and hwFrMapPppDlciNumber.
NUM hwFrMapPppIfIndex	1.3.6.1.4.1.2011.5.25.168.1.7.1.1	InterfaceIndex	not-accessible	Indicates the interface index.
I32 hwFrMapPppDlciNumber	1.3.6.1.4.1.2011.5.25.168.1.7.1.2	Integer32	read-only	Indicates the DLCI of the PVC mapped by PPP.
I32 hwFrMapPppVTIfIndex	1.3.6.1.4.1.2011.5.25.168.1.7.1.3	Integer32	read-only	Indicates the index of the VT interface.
INT hwFrMapPppState	1.3.6.1.4.1.2011.5.25.168.1.7.1.4	INTEGER	read-only	Indicates the state of the PPP map. Options: 1.inactive(1) - inactive 2.active(2) - active
hwFrMapBridgeTable	1.3.6.1.4.1.2011.5.25.168.1.8		not-accessible	This table is used to indicate the bridge mapping on the PVC. The index of this table are hwFrMapBridgeIfIndex and hwFrMapBridgeDlciNumber.
hwFrMapBridgeEntry	1.3.6.1.4.1.2011.5.25.168.1.8.1		not-accessible	This table is used to indicate the bridge mapping on the PVC. The index of this entry are hwFrMapBridgeIfIndex and hwFrMapBridgeDlciNumber.
NUM hwFrMapBridgeIfIndex	1.3.6.1.4.1.2011.5.25.168.1.8.1.1	InterfaceIndex	not-accessible	Indicates the interface index.
I32 hwFrMapBridgeDlciNumber	1.3.6.1.4.1.2011.5.25.168.1.8.1.2	Integer32	read-only	Indicates the DLCI of the PVC mapped by bridge.
INT hwFrMapBridgeState	1.3.6.1.4.1.2011.5.25.168.1.8.1.3	INTEGER	read-only	Indicates the state of the PVC mapped by bridge. Options: 1.inactive(1) - inactive 2.active(2) - active
hwFrConformance	1.3.6.1.4.1.2011.5.25.168.2
hwFrCompliances	1.3.6.1.4.1.2011.5.25.168.2.1
hwFrCompliance	1.3.6.1.4.1.2011.5.25.168.2.1.1			The compliance statement for systems supporting the HUAWEI-Fr-MIB.
hwFrGroups	1.3.6.1.4.1.2011.5.25.168.2.2
hwFrObjectGroup	1.3.6.1.4.1.2011.5.25.168.2.2.1			The fr attribute group.
hwFrPvcObjectGroup	1.3.6.1.4.1.2011.5.25.168.2.2.2			The fr PVC attribute group.
hwFrPvcGroupObjectGroup	1.3.6.1.4.1.2011.5.25.168.2.2.3			The fr pvc-group attribute group.
hwFrPvcGroupMemObjectGroup	1.3.6.1.4.1.2011.5.25.168.2.2.4			The fr pvc-group member attribute group.
hwFrPvcGroupMapIpObjectGroup	1.3.6.1.4.1.2011.5.25.168.2.2.5			The fr pvc-group mapping attribute group.
hwFrMapIpObjectGroup	1.3.6.1.4.1.2011.5.25.168.2.2.6			The fr ip mapping attribute group.
hwFrMapPppObjectGroup	1.3.6.1.4.1.2011.5.25.168.2.2.7			The fr ppp mapping attribute group.
hwFrMapBridgeObjectGroup	1.3.6.1.4.1.2011.5.25.168.2.2.8			The fr bridge mapping attribute group.

RFC description

Frame Relay interface management for Huawei devices, monitoring FR interface parameters and LMI configuration.

Start monitoring Huawei WAN router with Frame Relay interfaces with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-FR-MIB

What Is HUAWEI-FR-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description