CISCOSB-EMBWEB-MIB

All MIBs › CISCOSB-EMBWEB-MIB

Organization: Cisco Small Business

Last Updated: 2006-07-03

Category: Device Management, Vendor: RADLAN/Cisco SB

Description: Manages Cisco Small Business embedded web server configuration for the device management GUI.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCOSB-EMBWEB-MIB?

CISCOSB-EMBWEB-MIB is a Cisco Small Business (Cisco SB, Radlan-based firmware) proprietary MIB configuring the switch's Embedded Web Server (EMBWEB). Its objects cover MIB version, web-site selection, a security table (username, password, access level, IP address, port, SNMP version, status), close/receive/max-idle timeouts, an apply-EWS-files action, HTTP/HTTPS port and enable flags, and HTTPS certificate fields (country, state/province, locality, organization, common name). As a configuration/security MIB it lets an administrator confirm HTTP/HTTPS access settings and the embedded web server's TLS certificate identity on a Cisco Small Business switch. It is deployed on Cisco Small Business managed switches. Engineers can download the CISCOSB-EMBWEB-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCOSB-EMBWEB-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco Small Business managed switches

Monitoring Examples

An administrator checks rlEmWebHttpsEnable and rlEmWebCertificateCommonName to confirm the embedded web server's HTTPS configuration on a Cisco Small Business switch.

What Can Be Monitored

embedded web server access and HTTPS certificate configuration

Imported Objects

From CISCOSB-MIB

switch001

MODULE-IDENTITY

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
rlEmbWeb	1.3.6.1.4.1.9.6.1.101.66			This private MIB module adds MIBs to EMBWEB (Embedded Web Server).
INT rlEmWebMibVersion	1.3.6.1.4.1.9.6.1.101.66.1	INTEGER	read-only	Embedded web version, the current version is 2.
STR rlEmWebWebSite	1.3.6.1.4.1.9.6.1.101.66.2	DisplayString	read-write	Link for the vendor web site used to retrive information.
rlEmWebSecurityTable	1.3.6.1.4.1.9.6.1.101.66.3		not-accessible	Security Table whose entry is composed of username and Password, group and access privileges for each user. The access privileges can be one or more of none, read-files, read-write, and super.
rlEmWebSecurityEntry	1.3.6.1.4.1.9.6.1.101.66.3.1		not-accessible	The row definition for this table.
STR rlEmWebSecurityUserName	1.3.6.1.4.1.9.6.1.101.66.3.1.1	DisplayString	read-write	The User name.
STR rlEmWebSecurityPassword	1.3.6.1.4.1.9.6.1.101.66.3.1.2	DisplayString	read-write	The User password.
INT rlEmWebSecurityAccess	1.3.6.1.4.1.9.6.1.101.66.3.1.3	INTEGER	read-write	Access rights for this user .
IP rlEmWebSecurityIpAddr	1.3.6.1.4.1.9.6.1.101.66.3.1.4	IpAddress	read-write	IP Address to send the traps to.0 means doesn't want to receive traps.
INT rlEmWebSecurityPort	1.3.6.1.4.1.9.6.1.101.66.3.1.5	INTEGER	read-write	Port to send the traps to.
INT rlEmWebSecuritySnmpVersion	1.3.6.1.4.1.9.6.1.101.66.3.1.6	INTEGER	read-write	SNMP version supported by this user. For the agent use.
ROW rlEmWebSecurityStatus	1.3.6.1.4.1.9.6.1.101.66.3.1.7	RowStatus	read-write	The status of the security table entry. It's used to delete an entry
INT rlEmWebCloseTimeout	1.3.6.1.4.1.9.6.1.101.66.5	INTEGER	read-write	This variable defines the maximum time period in seconds that a TCP connection can stay open without depending on the TCP timeout mechanism
INT rlEmWebReceiveTimeout	1.3.6.1.4.1.9.6.1.101.66.6	INTEGER	read-write	This variable defines the maximum time period in seconds that a TCP connection can wait for data which hasn't arrived
INT rlEmWebMaxIdleTimeout	1.3.6.1.4.1.9.6.1.101.66.7	INTEGER	read-write	This variable defines the maximum HTTP Idle time period in seconds for a TCP connection.If another request isn't made at this period, the connection is closed. The value 0 is supported as 'no timeout'.
INT rlEmWebSetEWSfilesStatus	1.3.6.1.4.1.9.6.1.101.66.8	INTEGER	read-write	This variable sets the status of the embedded Web Server files to either closed or opened.
T/F rlEmbeddedWebApplied	1.3.6.1.4.1.9.6.1.101.66.9	TruthValue	read-only	Specifies if the device supports Embedded WEB: true - suppotrs false - does not support
INT rlEmWebHttpPort	1.3.6.1.4.1.9.6.1.101.66.10	INTEGER	read-write	Specifies the TCP port the embedded web uses for HTTP sessions.
T/F rlEmWebHttpEnable	1.3.6.1.4.1.9.6.1.101.66.11	TruthValue	read-write	Enable/Disable HTTP sessions
INT rlEmWebHttpsPort	1.3.6.1.4.1.9.6.1.101.66.12	INTEGER	read-write	Specifies the TCP port the embedded web uses for HTTPS sessions.
T/F rlEmWebHttpsEnable	1.3.6.1.4.1.9.6.1.101.66.13	TruthValue	read-write	Enable/Disable HTTPS sessions
STR rlEmWebCertificateCountryName	1.3.6.1.4.1.9.6.1.101.66.14	DisplayString	read-write	Value of country name field that will appear when a new certificate is generated.
STR rlEmWebCertificateStateOrProvinceName	1.3.6.1.4.1.9.6.1.101.66.15	DisplayString	read-write	Value of state or province name field that will appear when a new certificate is generated.
STR rlEmWebCertificateLocalityName	1.3.6.1.4.1.9.6.1.101.66.16	DisplayString	read-write	Value of locality field that will appear when a new certificate is generated.
STR rlEmWebCertificateOrganizationName	1.3.6.1.4.1.9.6.1.101.66.17	DisplayString	read-write	Value of organization field that will appear when a new certificate is generated.
IP rlEmWebCertificateCommonName	1.3.6.1.4.1.9.6.1.101.66.19	IpAddress	read-write	Value of common name field that will appear when a new certificate is generated.
INT rlEmWebCertificateRegenerate	1.3.6.1.4.1.9.6.1.101.66.20	INTEGER	read-write	Setting to a regenerateCertificate causes a new certifiacte to be generated and to be used for all new sessions.
INT rlEmWebRsaKeyLength	1.3.6.1.4.1.9.6.1.101.66.21	INTEGER	read-write	Setting the RSA key size that will be created when rlEmWebRegenerateCertificateAndKey will be set to regenerateCertificateAndKey.
INT rlEmWebDebug	1.3.6.1.4.1.9.6.1.101.66.22	INTEGER	read-write	MIB variable for setting debug information.
STR rlEmWebURL	1.3.6.1.4.1.9.6.1.101.66.23	DisplayString	read-only	The URL through which the EWS of this device can be accessed.
T/F rlEmWebDisplayNonPresentEntities	1.3.6.1.4.1.9.6.1.101.66.24	TruthValue	read-only	This object indicates whether the EWS is required to display non-present entities (like non-present ports, IP addresses on non-present ports etc.) on it's screens.
T/F rlEmWebCertificateExists	1.3.6.1.4.1.9.6.1.101.66.25	TruthValue	read-only	This object indicates whether a certificate has been generated.
INT rlEmWebHttpsActiveCertificateId	1.3.6.1.4.1.9.6.1.101.66.26	INTEGER	read-write	By setting this scalar https is notified that the certificate and key with this index should be used for new https sessions. Even if the certifcate or key doesn't exist yet the operation will succeed.
INT rlEmWebExtraPort	1.3.6.1.4.1.9.6.1.101.66.27	INTEGER	read-write	Specifies the TCP port the embedded web uses for The Extra Port sessions.
INT rlEmWebExtraPortType	1.3.6.1.4.1.9.6.1.101.66.28	INTEGER	read-write	Specifies the Extra Port Type HTTP/HTTPS for all sessions.
INT rlEmWebMaxHttpsIdleTimeout	1.3.6.1.4.1.9.6.1.101.66.29	INTEGER	read-write	This variable defines the maximum HTTPS Idle time period in seconds for a web connection.If another request isn't made at this period, the connection is closed. The value 0 is supported as 'no timeout'.
rlEmWebServiceTable	1.3.6.1.4.1.9.6.1.101.66.30		not-accessible	.
rlEmWebServiceEntry	1.3.6.1.4.1.9.6.1.101.66.30.1		not-accessible	The row definition for this table.
INT rlEmWebServiceId	1.3.6.1.4.1.9.6.1.101.66.30.1.1	INTEGER	not-accessible	The Service Id.
STR rlEmWebServiceName	1.3.6.1.4.1.9.6.1.101.66.30.1.2	DisplayString	read-only	Service name
RLE rlEmWebServiceEnable	1.3.6.1.4.1.9.6.1.101.66.30.1.3	RlEmbWebEnabled	read-write	Indicates whether the service is enabled or not. if set to 'default' will the service to go back to its initialization default status.
INT rlEmWebServicePort	1.3.6.1.4.1.9.6.1.101.66.30.1.4	INTEGER	read-write	Indicates whether the TCP port on which service is listening. value 0 will set the service to it's default port
INT rlEmWebServiceMaxUsers	1.3.6.1.4.1.9.6.1.101.66.30.1.5	INTEGER	read-only	The maximal number of users for this service.
RLE rlEmWebServiceProtocol	1.3.6.1.4.1.9.6.1.101.66.30.1.6	RlEmbWebProtocol	read-write	Indicates the protocol that the service operates on. Note that the general HTTP service can have only the http value and the general HTTPS service can have only the https value. setting the field to 'default' will cause the service to go back to it's initialization settings.
INT rlEmWebServiceCertificateId	1.3.6.1.4.1.9.6.1.101.66.30.1.7	INTEGER	read-write	Indicates the certificate used by the service if rlEmWebServiceProtocol is https. A value of 0 indicates that a certificate has not been assigned to this service. setting this field to 1000 will cause the service to go back to it's initialization value.
INT rlEmWebServiceMaxIdleTimeOut	1.3.6.1.4.1.9.6.1.101.66.30.1.8	INTEGER	read-write	This variable defines the maximum Idle time period in seconds for a TCP connection. If another request isn't made at this period, the connection is closed. The value 0 is supported as 'no timeout'.setting this field to 3932160 will cause the service to go back to it's initialization value.

RFC description

Manages embedded web server configuration, authentication, and security on Cisco Small Business switches.

Start monitoring Cisco Small Business managed switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCOSB-EMBWEB-MIB

What Is CISCOSB-EMBWEB-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description