HUAWEI-BGP-ACCOUNTING-MIB

All MIBs › HUAWEI-BGP-ACCOUNTING-MIB

Organization: Huawei Technologies co.,Ltd.

Last Updated: 2007-05-10

Category: Protocol: BGP, Routing Protocols, Vendor: Huawei

Description: Huawei MIB that supplies BGP traffic accounting statistics broken down per prefix and per peer for BGP routing sessions.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-BGP-ACCOUNTING-MIB?

HUAWEI-BGP-ACCOUNTING-MIB is a Huawei-specific MIB that provides per-prefix and per-peer traffic accounting statistics for BGP routing sessions, layering traffic-volume visibility on top of standard BGP peering. It exposes configuration and monitoring objects for the BGP Accounting feature, though the specific table/object names weren't included in the available source excerpt. Its monitoring role is traffic/performance visibility for the routing control plane: administrators would use it to see how much traffic is being accounted against specific prefixes or peers, helping identify unexpectedly heavy routes or peers for capacity planning or billing purposes. It depends on the underlying BGP protocol and presumably the standard BGP4-MIB for peer/session context, since accounting is layered on top of active BGP sessions. It is deployed on Huawei routers acting as BGP speakers in service-provider or large enterprise networks needing per-route or per-peer traffic accounting. Engineers can download the HUAWEI-BGP-ACCOUNTING-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-BGP-ACCOUNTING-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei router (BGP speaker)

Monitoring Examples

No specific object or table names were provided in the source excerpt (module description and sample objects were both empty beyond the generic feature description), so a concrete polling walkthrough cannot be grounded in real identifiers here. In general use, an administrator would check per-peer or per-prefix traffic-accounting counters to identify a BGP peer or route unexpectedly carrying much more traffic than provisioned, useful for capacity planning or interconnect billing disputes.

What Can Be Monitored

per-peer traffic accounting
per-prefix traffic accounting
BGP accounting feature configuration state

Imported Objects

From HUAWEI-MIB

hwDatacomm

OBJECT-IDENTITY

From RFC1213-MIB

ifIndex

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwBgpAcctMIB	1.3.6.1.4.1.2011.5.25.39			The HUAWEI-BGP-ACCOUNTING-MIB contains objects to Manage configuration and Monitor running state for BGP Accounting feature.
hwBgpAcctMIBObjects	1.3.6.1.4.1.2011.5.25.39.1
hwBgpAcctCfgTable	1.3.6.1.4.1.2011.5.25.39.1.1		not-accessible	The hwBgpAcctCfgTable provides the configuration of BGP Accounting.
hwBgpAcctCfgEntry	1.3.6.1.4.1.2011.5.25.39.1.1.1		not-accessible	Each HwBgpAcctCfgEntry provides BGP accounting configuration for traffic of interest on an ingress and/or egress interface.
I32 hwbgpAcctCfgIfIndex	1.3.6.1.4.1.2011.5.25.39.1.1.1.1	Integer32	read-only	Interface Index, equal to ifIndex.
ADR hwbgpAcctSrcOrDest	1.3.6.1.4.1.2011.5.25.39.1.1.1.2	AddressType	read-create	An integer value greater than 0, that uniquely identifies BGP accounting based on source address or destination address. 1 is source ,2 is destination, and the defaule value is 2
DIR hwbgpAcctDirection	1.3.6.1.4.1.2011.5.25.39.1.1.1.3	DirectionType	read-create	An integer value greater than 0, that uniquely identifies BGP accounting the inbound traffic or outbound traffic. 1 is inbound ,2 is outbound, and 3 is both inbound and outbound
ROW hwbgpAcctCfgRowStatus	1.3.6.1.4.1.2011.5.25.39.1.1.1.4	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy
hwBgpAcctStatTable	1.3.6.1.4.1.2011.5.25.39.1.2		not-accessible	The hwBgpAcctStatTable provides BGP accounting statistics for ingress and egress traffic on an interface. This data could be used for purposes like billing.
hwBgpAcctStatEntry	1.3.6.1.4.1.2011.5.25.39.1.2.1		not-accessible	Each hwBgpAcctStatEntry provides statistics for traffic of interest on an ingress and/or egress interfaces. The statistics include ingress packet counts, ingress octet counts, egress packet counts and egress octet counts. Entries are created when traffic-type is configured on an interface. Entries are deleted automatically when the user removes the corresponding traffic-type configuration from an interface.
I32 hwbgpAcctStatIfIndex	1.3.6.1.4.1.2011.5.25.39.1.2.1.1	Integer32	read-only	Interface Index, equal to ifIndex.
I32 hwbgpAcctTrafficIndex	1.3.6.1.4.1.2011.5.25.39.1.2.1.2	Integer32	read-only	An integer value greater than 0, that uniquely identifies a traffic-type. The traffic-type means the traffic coming into an interface can be differentiated into different types. It is up to the user to give meaning to and configure the various traffic-types on an interface.
C64 hwbgpAcctInPacketCount	1.3.6.1.4.1.2011.5.25.39.1.2.1.3	Counter64	read-only	The total number of packets received for a particular traffic-type on an interface.
C64 hwbgpAcctInOctetCount	1.3.6.1.4.1.2011.5.25.39.1.2.1.4	Counter64	read-only	The total number of octets received for a particular traffic-type on an interface.
C64 hwbgpAcctOutPacketCount	1.3.6.1.4.1.2011.5.25.39.1.2.1.5	Counter64	read-only	The total number of packets transmitted for a particular traffic-type on an interface.
C64 hwbgpAcctOutOctetCount	1.3.6.1.4.1.2011.5.25.39.1.2.1.6	Counter64	read-only	The total number of octets transmitted for a particular traffic-type on an interface.
hwBgpAcctConformance	1.3.6.1.4.1.2011.5.25.39.2
hwBgpAcctCompliances	1.3.6.1.4.1.2011.5.25.39.2.1
hwBgpAcctCompliance	1.3.6.1.4.1.2011.5.25.39.2.1.1			The compliance statement for entities that implement ip bgp-accouting on a router.
hwBgpAcctStatGroups	1.3.6.1.4.1.2011.5.25.39.2.2
hwBgpAcctCfgGroup	1.3.6.1.4.1.2011.5.25.39.2.2.1			Required objects to provide hwBgpAcctMIB objects configuration information. hwBgpAcctCfgGroup is optional.
hwBgpAcctStatGroup	1.3.6.1.4.1.2011.5.25.39.2.2.2			Required objects to provide hwBgpAcctMIB objects configuration information. hwBgpAcctStatGroup is optional.

RFC description

Huawei BGP accounting MIB providing per-prefix and per-peer traffic accounting statistics for BGP routing sessions.

Start monitoring Huawei router (BGP speaker, per-prefix/peer traffic accounting) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-BGP-ACCOUNTING-MIB

What Is HUAWEI-BGP-ACCOUNTING-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description