HUAWEI-ALARM-MIB

All MIBs › HUAWEI-ALARM-MIB

Organization: Huawei Technologies Co.,Ltd.

Last Updated: 2013-10-28

Category: Alarm and Event Management, Vendor: Huawei

Description: Huawei alarm management MIB for monitoring, querying, and clearing active alarms and alarm history on Huawei network devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-ALARM-MIB?

HUAWEI-ALARM-MIB is a Huawei enterprise MIB whose short description indicates it manages active alarms and alarm history, allowing querying and clearing of alarm conditions on Huawei network devices; note that the module_desc text provided actually describes bulk SNMP data file transfer, suggesting a possible documentation mismatch, so this description follows the more specific short_desc. Assuming the alarm-management purpose, it would expose data about currently active faults, their severity, and historical alarm records across the device's subsystems. Its monitoring value is centered on fault/status monitoring: giving operators a consolidated view of hardware and software fault conditions (e.g., interface down, power/environmental faults, protocol failures) without polling each subsystem's native MIB individually. It likely depends on or aggregates alarm sources defined elsewhere in Huawei's per-feature MIBs (e.g., trap MIBs for specific hardware). It is deployed across Huawei routers, switches, and access equipment as a centralized alarm management interface for network operations centers. Engineers can download the HUAWEI-ALARM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-ALARM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei routers, switches, and access equipment

Monitoring Examples

No sample objects were provided for this module, and the module description text does not match the alarm-management short description, so a concrete object/table-level monitoring scenario cannot be responsibly constructed here; in practice an operator would query an active-alarm table to see currently outstanding fault conditions and their severity, but the exact object names are unconfirmed from the available data.

Imported Objects

From HUAWEI-MIB

hwDatacomm

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwAlarmMIB	1.3.6.1.4.1.2011.5.25.180			The MIB module for creating and deleting bulk files of SNMP data for file transfer.
hwAlarmObjects	1.3.6.1.4.1.2011.5.25.180.1
hwSnmpTargetAddrExtTable	1.3.6.1.4.1.2011.5.25.180.1.1		not-accessible	Define snmp target Address extend table.
hwSnmpTargetAddrExtEntry	1.3.6.1.4.1.2011.5.25.180.1.1.1		not-accessible	The entry of the extended snmp target address table.
OCT hwSnmpTargetAddrExtIndex	1.3.6.1.4.1.2011.5.25.180.1.1.1.1	OCTET STRING	accessible-for-notify	the extended target address table index.
OCT hwSnmpTargetSlaveAddressList	1.3.6.1.4.1.2011.5.25.180.1.1.1.2	OCTET STRING	read-create	Address of slave target host.
INT hwSnmpTargetAddrReliability	1.3.6.1.4.1.2011.5.25.180.1.1.1.3	INTEGER	read-write	If enable, then the extend VBs will be added to the alarm parameters.
INT hwSnmpTargetAddrAlarmReliability	1.3.6.1.4.1.2011.5.25.180.1.1.1.4	INTEGER	read-write	Alarm reliability function enable flag.
INT hwSnmpTargetAddrEventReliability	1.3.6.1.4.1.2011.5.25.180.1.1.1.5	INTEGER	read-write	Event reliability function enable flag.
ROW hwSnmpTargetAddrExtRowStatus	1.3.6.1.4.1.2011.5.25.180.1.1.1.6	RowStatus	read-create	The row status of the target extend table.
I32 hwMinAlarmSyncIndex	1.3.6.1.4.1.2011.5.25.180.1.2	Integer32	read-only	The minimal index value for alarm synchronization.
I32 hwMaxAlarmSyncIndex	1.3.6.1.4.1.2011.5.25.180.1.3	Integer32	read-only	The maximal index value for alarm synchronization.
hwAlarmSyncTable	1.3.6.1.4.1.2011.5.25.180.1.4		not-accessible	Alarm synchronization table.
hwAlarmSyncEntry	1.3.6.1.4.1.2011.5.25.180.1.4.1		not-accessible	Alarm synchronization table entry.
U32 hwAlarmSyncIndex	1.3.6.1.4.1.2011.5.25.180.1.4.1.1	Unsigned32	not-accessible	Alarm synchronization index.
C64 hwAlarmSyncId	1.3.6.1.4.1.2011.5.25.180.1.4.1.2	Counter64	read-only	Alarm id
OCT hwAlarmSyncPara	1.3.6.1.4.1.2011.5.25.180.1.4.1.3	OCTET STRING	read-only	This object indicates the information contained in the binding variable list of the alarm message.
U32 hwMinEventSyncIndex	1.3.6.1.4.1.2011.5.25.180.1.5	Unsigned32	read-only	The minimal index value for event synchronization.
U32 hwMaxEventSyncIndex	1.3.6.1.4.1.2011.5.25.180.1.6	Unsigned32	read-only	The maximal index value for event synchronization.
hwEventSyncTable	1.3.6.1.4.1.2011.5.25.180.1.7		not-accessible	The event synchronization table.
hwEventSyncEntry	1.3.6.1.4.1.2011.5.25.180.1.7.1		not-accessible	The event synchronization table entry.
U32 hwEventSyncIndex	1.3.6.1.4.1.2011.5.25.180.1.7.1.1	Unsigned32	not-accessible	The event synchronization index value.
C64 hwEventSyncId	1.3.6.1.4.1.2011.5.25.180.1.7.1.2	Counter64	read-only	The event id.
OCT hwEventSyncPara	1.3.6.1.4.1.2011.5.25.180.1.7.1.3	OCTET STRING	read-only	This object indicates the information contained in the binding variable list of an event.
hwAlarmActiveTable	1.3.6.1.4.1.2011.5.25.180.1.8		not-accessible	The active alarm table.
hwAlarmActiveEntry	1.3.6.1.4.1.2011.5.25.180.1.8.1		not-accessible	Entries appear in this table when alarms are raised. They are removed when the alarm is cleared.
U32 hwActiveAlarmIndex	1.3.6.1.4.1.2011.5.25.180.1.8.1.1	Unsigned32	not-accessible	A strictly monotonically increasing integer which acts as the index of all alarms and events. It wraps back to 1 after it reaches its maximum value.
C64 hwActiveAlarmId	1.3.6.1.4.1.2011.5.25.180.1.8.1.2	Counter64	read-only	The id of an alarm.
OCT hwActiveAlarmPara	1.3.6.1.4.1.2011.5.25.180.1.8.1.3	OCTET STRING	read-only	This object indicates the parameters of an active alarm.
ROW hwActiveAlarmRowStatus	1.3.6.1.4.1.2011.5.25.180.1.8.1.4	RowStatus	read-create	This object indicates the row status.
hwEventTable	1.3.6.1.4.1.2011.5.25.180.1.9		not-accessible	The event table.
hwEventEntry	1.3.6.1.4.1.2011.5.25.180.1.9.1		not-accessible	Entries appear in this table when events are raised.
U32 hwEventIndex	1.3.6.1.4.1.2011.5.25.180.1.9.1.1	Unsigned32	not-accessible	A strictly monotonically increasing integer which acts as the index of all alarms and events. It wraps back to 1 after it reaches its maximum value.
C64 hwEventId	1.3.6.1.4.1.2011.5.25.180.1.9.1.2	Counter64	read-only	This object indicates the OID of an event.
OCT hwEventPara	1.3.6.1.4.1.2011.5.25.180.1.9.1.3	OCTET STRING	read-only	This object indicates the parameter information of an event.
ROW hwEventRowStatus	1.3.6.1.4.1.2011.5.25.180.1.9.1.4	RowStatus	read-create	This object indicates the row status.
DAT hwAlarmDateAndTime	1.3.6.1.4.1.2011.5.25.180.1.18	DateAndTime	not-accessible	This object indicates the time when an alarm is generated or cleared.
INT hwAlarmOrEventFlag	1.3.6.1.4.1.2011.5.25.180.1.19	INTEGER	not-accessible	Indicates the type of alarm messages. 1: Alarm 2: Event
OCT hwAlarmReasonInfo	1.3.6.1.4.1.2011.5.25.180.1.20	OCTET STRING	not-accessible	The reason for the alarm.
INT hwAlarmSeverity	1.3.6.1.4.1.2011.5.25.180.1.25	INTEGER	not-accessible	Alarm severity.
hwSnmpTargetSyncIndexTable	1.3.6.1.4.1.2011.5.25.180.1.28		not-accessible	The synchronization index of snmp targets table.
hwSnmpTargetSyncIndexEntry	1.3.6.1.4.1.2011.5.25.180.1.28.1		not-accessible	The entry of the synchronization index table.
U32 hwMinAlmSyncIndex	1.3.6.1.4.1.2011.5.25.180.1.28.1.1	Unsigned32	read-only	The minimal index value for alarm synchronization.
U32 hwMaxAlmSyncIndex	1.3.6.1.4.1.2011.5.25.180.1.28.1.2	Unsigned32	read-only	The maximal index value for alarm synchronization.
U32 hwMinEvtSyncIndex	1.3.6.1.4.1.2011.5.25.180.1.28.1.3	Unsigned32	read-only	The minimal index value for event synchronization.
U32 hwMaxEvtSyncIndex	1.3.6.1.4.1.2011.5.25.180.1.28.1.4	Unsigned32	read-only	The maximal index value for event synchronization.
hwAlarmActiveVsTable	1.3.6.1.4.1.2011.5.25.180.1.31		not-accessible	The active alarm management table for LSVS support version.
hwAlarmActiveVsEntry	1.3.6.1.4.1.2011.5.25.180.1.31.1		not-accessible	The active alarm table for VS support version.
U32 hwAlarmActiveVsId	1.3.6.1.4.1.2011.5.25.180.1.31.1.9	Unsigned32	read-only	The VS id of the alarm.
hwEventVsTable	1.3.6.1.4.1.2011.5.25.180.1.33		not-accessible	The event table for LSVS support version.
hwEventVsEntry	1.3.6.1.4.1.2011.5.25.180.1.33.1		not-accessible	The event entry.
U32 hwEventVsId	1.3.6.1.4.1.2011.5.25.180.1.33.1.9	Unsigned32	read-only	The VS id of the event.
hwAlarmSyncVsTable	1.3.6.1.4.1.2011.5.25.180.1.36		not-accessible	Alarm synchronization table.
hwAlarmSyncVsEntry	1.3.6.1.4.1.2011.5.25.180.1.36.1		not-accessible	Alarm synchronization table entry.
U32 hwAlarmSyncVsId	1.3.6.1.4.1.2011.5.25.180.1.36.1.3	Unsigned32	read-only	Alarm VS id.
hwEventSyncVsTable	1.3.6.1.4.1.2011.5.25.180.1.39		not-accessible	The event synchronization table.
hwEventSyncVsEntry	1.3.6.1.4.1.2011.5.25.180.1.39.1		not-accessible	The event synchronization table entry.
U32 hwEvevtSyncVsId	1.3.6.1.4.1.2011.5.25.180.1.39.1.3	Unsigned32	read-only	The VS id of the event.
hwAlarmNotifications	1.3.6.1.4.1.2011.5.25.180.2
NTF hwAlarmTargetHostDel	1.3.6.1.4.1.2011.5.25.180.2.1			The notification for the deletion of the target host.
NTF hwAlarmStorm	1.3.6.1.4.1.2011.5.25.180.2.2			The alarm storm notification.
hwAlarmConformance	1.3.6.1.4.1.2011.5.25.180.3
hwAlarmCompliances	1.3.6.1.4.1.2011.5.25.180.3.1
hwAlarmCompliance	1.3.6.1.4.1.2011.5.25.180.3.1.1			The compliance statement for entities which implement the Huawei Alarm mib.
hwAlarmGroups	1.3.6.1.4.1.2011.5.25.180.3.2
hwAlarmReliabilityGroup	1.3.6.1.4.1.2011.5.25.180.3.2.1			The objects for alarm reliability and snmp target address list.
hwActiveInfoGroup	1.3.6.1.4.1.2011.5.25.180.3.2.7			The nodes for querying the active alarm information.
hwTrapInfoSyncGroup	1.3.6.1.4.1.2011.5.25.180.3.2.8			All information of trap synchronization.
hwActiveInfoVsGroup	1.3.6.1.4.1.2011.5.25.180.3.2.9			The VS id of the active alarm or event.
hwTrapSyncVsGroup	1.3.6.1.4.1.2011.5.25.180.3.2.10			The VS id and the synchronization sequence number nodes.
hwAlarmTrapInfoGroup	1.3.6.1.4.1.2011.5.25.180.3.2.11			Alarm trap nodes.
hwTrapSuppressionGroup	1.3.6.1.4.1.2011.5.25.180.3.2.12			The trap suppression nodes.
hwTrapInfoGroup	1.3.6.1.4.1.2011.5.25.180.3.2.13			The basal information of trap nodes.
hwAlarmConfig	1.3.6.1.4.1.2011.5.25.180.5
hwAlarmAttr	1.3.6.1.4.1.2011.5.25.180.5.1
hwAlarmAttrTable	1.3.6.1.4.1.2011.5.25.180.5.1.1		not-accessible	This table contains attribute of alarms.
hwAlarmAttrEntry	1.3.6.1.4.1.2011.5.25.180.5.1.1.1		not-accessible	Entry of hwAlarmAttrTable.
OCT hwAlarmName	1.3.6.1.4.1.2011.5.25.180.5.1.1.1.1	OCTET STRING	read-only	The name of registered alarms.
INT hwAlarmAttrSeverity	1.3.6.1.4.1.2011.5.25.180.5.1.1.1.2	INTEGER	read-write	The severity of alarms.
hwAlarmMask	1.3.6.1.4.1.2011.5.25.180.5.3
hwAlarmMaskBasedOnIfnameTable	1.3.6.1.4.1.2011.5.25.180.5.3.1		not-accessible	Define alarm mask table, which is based on interface.
hwAlarmMaskBasedOnIfnameEntry	1.3.6.1.4.1.2011.5.25.180.5.3.1.1		not-accessible	Entry of hwAlarmMaskBasedOnIfnameTable.
OCT hwAlarmMaskIfName	1.3.6.1.4.1.2011.5.25.180.5.3.1.1.1	OCTET STRING	read-only	The interface name for alarm mask.
ROW hwAlarmMaskBasedOnIfnameRowStatus	1.3.6.1.4.1.2011.5.25.180.5.3.1.1.51	RowStatus	read-create	The row status of the alarm mask based on interface table.
hwAlarmMaskBasedOnEntityTable	1.3.6.1.4.1.2011.5.25.180.5.3.2		not-accessible	Define alarm mask table, which is based on entity index.
hwAlarmMaskBasedOnEntityEntry	1.3.6.1.4.1.2011.5.25.180.5.3.2.1		not-accessible	Entry of hwAlarmMaskBasedOnEntityTable.
I32 hwAlarmMaskEntPhysicalIndex	1.3.6.1.4.1.2011.5.25.180.5.3.2.1.1	Integer32	read-only	The physical index of entity for alarm mask.
OCT hwAlarmMaskEntPhysicalName	1.3.6.1.4.1.2011.5.25.180.5.3.2.1.2	OCTET STRING	read-write	The physical name of entity for alarm mask.
ROW hwAlarmMaskBasedOnEntityRowStatus	1.3.6.1.4.1.2011.5.25.180.5.3.2.1.51	RowStatus	read-create	The row status of the alarm mask based on entity table.
hwAlarmDelay	1.3.6.1.4.1.2011.5.25.180.5.4
INT hwAlarmDelaySuppressionEnable	1.3.6.1.4.1.2011.5.25.180.5.4.1	INTEGER	read-write	The switch of alarm delay suppression. The default is enable.
hwAlarmDelaySuppressionTable	1.3.6.1.4.1.2011.5.25.180.5.4.2		not-accessible	Define alarm delay suppression table.
hwAlarmDelaySuppressionEntry	1.3.6.1.4.1.2011.5.25.180.5.4.2.1		not-accessible	The entry of the alarm delay suppression table.
I32 hwAlarmDelaySuppressionCausePersistPeriod	1.3.6.1.4.1.2011.5.25.180.5.4.2.1.1	Integer32	read-write	The cause persist period of alarm delay suppression.
I32 hwAlarmDelaySuppressionClearPersistPeriod	1.3.6.1.4.1.2011.5.25.180.5.4.2.1.2	Integer32	read-write	The clear persist period of alarm delay suppression.
hwAlarmCorrAnalyze	1.3.6.1.4.1.2011.5.25.180.5.5
INT hwAlarmCorrAnalyzeSuppressionEnable	1.3.6.1.4.1.2011.5.25.180.5.5.1	INTEGER	read-write	The switch of alarm correlation analyze suppression.
INT hwAlarmCorrAnalyzeSuppressionRootCauseIndication	1.3.6.1.4.1.2011.5.25.180.5.5.2	INTEGER	not-accessible	If alarm has passed correaltion analysis, this indication is rootcause or nonrootcause, default is independent.
OCT hwAlarmCorrAnalyzeSuppressionParentSequence	1.3.6.1.4.1.2011.5.25.180.5.5.3	OCTET STRING	not-accessible	The parent sequence of alarm, whose indication is nonrootcause.
hwAlarmCorrAnalyzeSuppressionTable	1.3.6.1.4.1.2011.5.25.180.5.5.4		not-accessible	Define alarm correlation analyze suppression table.
hwAlarmCorrAnalyzeSuppressionEntry	1.3.6.1.4.1.2011.5.25.180.5.5.4.1		not-accessible	The entry of alarm correlation analyze suppression table.
INT hwAlarmCorrAnalyzeSuppressionStatus	1.3.6.1.4.1.2011.5.25.180.5.5.4.1.1	INTEGER	read-write	The status of alarm correlation suppression for each target host.
hwEventConfig	1.3.6.1.4.1.2011.5.25.180.6
hwEventAttr	1.3.6.1.4.1.2011.5.25.180.6.1
hwEventAttrTable	1.3.6.1.4.1.2011.5.25.180.6.1.1		not-accessible	This table contains attribute of events.
hwEventAttrEntry	1.3.6.1.4.1.2011.5.25.180.6.1.1.1		not-accessible	Entry of hwEventAttrTable.
OCT hwEventName	1.3.6.1.4.1.2011.5.25.180.6.1.1.1.1	OCTET STRING	read-only	The name of registered events.
INT hwEventAttrSeverity	1.3.6.1.4.1.2011.5.25.180.6.1.1.1.2	INTEGER	read-only	The severity of evens.
hwEventDelay	1.3.6.1.4.1.2011.5.25.180.6.4
INT hwEventDelaySuppressionEnable	1.3.6.1.4.1.2011.5.25.180.6.4.1	INTEGER	read-write	The switch of event delay suppression.
hwEventDelaySuppressionTable	1.3.6.1.4.1.2011.5.25.180.6.4.2		not-accessible	Define event delay suppression table.
hwEventDelaySuppressionEntry	1.3.6.1.4.1.2011.5.25.180.6.4.2.1		not-accessible	The entry of event delay suppression table.
I32 hwEventDelaySuppressionCausePersistPeriod	1.3.6.1.4.1.2011.5.25.180.6.4.2.1.1	Integer32	read-write	The cause persist period of event delay suppression.

RFC description

Huawei alarm management and bulk SNMP data file transfer with extended target address and reliability.

Start monitoring Huawei router, switch, or access equipment (centralized alarm management) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-ALARM-MIB

What Is HUAWEI-ALARM-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description