HPN-ICF-VOICE-IF-MIB

All MIBs › HPN-ICF-VOICE-IF-MIB

Last Updated: 2007-12-10

Category: Domain: VoIP/Telephony, Vendor: H3C/HH3C, Vendor: HP/HPE

Description: Manages physical voice interface parameters including signaling type and codec negotiation on HP/Comware gateways.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-VOICE-IF-MIB?

HPN-ICF-VOICE-IF-MIB is an HP/H3C Comware proprietary MIB configuring general voice-interface parameters, mirroring the sibling A3COM-HUAWEI-VOIF-MIB. Its configuration table records comfort-noise-generation enable, non-linear-processing switch, input/output gain, echo-cancellation switch/delay, inter-digit and first-digit dial timers, private-line enable, and ring-back-tone region setting. As a configuration MIB it lets an administrator confirm a voice interface's echo-cancellation and gain settings match the intended call-quality target. It is deployed on HP/H3C Comware voice gateway equipment. Engineers can download the HPN-ICF-VOICE-IF-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-VOICE-IF-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP/H3C Comware voice gateway equipment

Monitoring Examples

An administrator checks hpnicfVoiceIfCfgEchoCancelSwitch and hpnicfVoiceIfCfgEchoCancelDelay on a voice port reporting echo complaints, to confirm echo cancellation is enabled with an appropriate delay.

What Can Be Monitored

voice interface echo-cancellation and gain configuration

Imported Objects

From HPN-ICF-OID-MIB

hpnicfVoice

OBJECT-IDENTITY

From IF-MIB

ifIndex

OBJECT-TYPE

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfVoiceInterface	1.3.6.1.4.1.11.2.14.11.15.2.39.13			This MIB file is to provide the definition of the voice interface general configuration.
hpnicfVoiceIfObjects	1.3.6.1.4.1.11.2.14.11.15.2.39.13.1
hpnicfVoiceIfConfigTable	1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1		not-accessible	The table contains configurable parameters for both analog voice interface and digital voice interface.
hpnicfVoiceIfConfigEntry	1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1		not-accessible	The entry of voice interface table.
INT hpnicfVoiceIfCfgCngOn	1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.1	INTEGER	read-write	This object indicates whether the silence gaps should be filled with background noise. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line.
INT hpnicfVoiceIfCfgNonLinearSwitch	1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.2	INTEGER	read-write	This object expresses the nonlinear processing is enable or disable for the voice interface. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line. Currently, only digital voice subscriber lines can be set disabled.
I32 hpnicfVoiceIfCfgInputGain	1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.3	Integer32	read-write	This object indicates the amount of gain added to the receiver side of the voice interface. Unit is 0.1 db. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line.
I32 hpnicfVoiceIfCfgOutputGain	1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.4	Integer32	read-write	This object indicates the amount of gain added to the send side of the voice interface. Unit is 0.1 db. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line.
INT hpnicfVoiceIfCfgEchoCancelSwitch	1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.5	INTEGER	read-write	This object indicates whether the echo cancellation is enabled. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line.
I32 hpnicfVoiceIfCfgEchoCancelDelay	1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.6	Integer32	read-write	This object indicates the delay of the echo cancellation for the voice interface. This value couldn't be modified unless hpnicfVoiceIfCfgEchoCancelSwitch is enable. Unit is milliseconds. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line. The default value of this object is 32.
I32 hpnicfVoiceIfCfgTimerDialInterval	1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.7	Integer32	read-write	The interval, in seconds, between two dialing numbers. The default value of this object is 10 seconds. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 with loop-start or ground-start protocol voice subscriber line.
I32 hpnicfVoiceIfCfgTimerFirstDial	1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.8	Integer32	read-write	The period of time, in seconds, before dialing the first number. The default value of this object is 10 seconds. It is applicable to FXO, FXS subscriber lines and E1/T1 with loop-start or ground-start protocol voice subscriber line.
STR hpnicfVoiceIfCfgPrivateline	1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.9	DisplayString	read-write	This object indicates the E.164 phone number for plar mode. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line.
OCT hpnicfVoiceIfCfgRegTone	1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.10	OCTET STRING	read-write	This object uses 2 or 3 letter country code specify voice parameters of different countrys. This value will take effect on all voice interfaces of all cards on the device.

RFC description

Configures analog and digital voice interface parameters on HP networking devices.

Start monitoring HP/H3C Comware voice gateway equipment (voice interface general config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-VOICE-IF-MIB

What Is HPN-ICF-VOICE-IF-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description