HUAWEI-ENT-VOICE-DIAGNOSE-MIB

All MIBs › HUAWEI-ENT-VOICE-DIAGNOSE-MIB

Organization: Huawei Technologies Co.,Ltd.

Last Updated: 2011-07-01

Category: Domain: VoIP/Telephony, Vendor: Huawei

Description: Huawei enterprise voice diagnostics MIB providing objects to perform and collect results of voice quality and VoIP troubleshooting tests.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-ENT-VOICE-DIAGNOSE-MIB?

HUAWEI-ENT-VOICE-DIAGNOSE-MIB is a Huawei enterprise-voice MIB providing objects to invoke and collect results from voice-quality and VoIP troubleshooting tests. It exposes test-control objects alongside a results category covering measured voice-quality metrics, making it a diagnostics/testing MIB rather than a passive counter MIB. Monitoring it is about software-driven diagnostic status: triggering a test and then checking whether it completed and what quality metrics (such as jitter, delay, packet loss, or a MOS-like score) it measured on a given voice path, which surfaces call-quality problems before they escalate to user complaints. It relates conceptually to voice-quality reporting standards such as RTCP-XR, though as a Huawei MIB it packages test invocation and results in its own object structure. It is deployed on Huawei enterprise voice gateways and routers carrying VoIP traffic for enterprise telephony. Network engineers evaluating or troubleshooting this functionality can download the HUAWEI-ENT-VOICE-DIAGNOSE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-ENT-VOICE-DIAGNOSE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei enterprise voice gateways/routers with VoIP capability

Monitoring Examples

An administrator would trigger a voice diagnostic test through this MIB's control objects and then poll the results table for measured jitter, delay, packet loss, and a voice-quality score on the tested call path, using a poor score to pinpoint a degraded VoIP trunk or media gateway.

What Can Be Monitored

voice diagnostic test status
measured jitter/delay/packet loss
voice quality (MOS-like) score
test invocation and result history

Imported Objects

From HUAWEI-MIB

hwDatacomm

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32
private

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwEntVoiceDiagnoseMIB	1.3.6.1.4.1.2011.5.25.314			Huawei VOICE DIAGNOSE mib.
hwEntPotsCircuitTestTable	1.3.6.1.4.1.2011.5.25.314.1
INT hwEntPotsCircuitTestOprType	1.3.6.1.4.1.2011.5.25.314.1.1	INTEGER	read-write	Indicates the operation type.
I32 hwEntPotsCircuitTestPort	1.3.6.1.4.1.2011.5.25.314.1.2	Integer32	read-write	Indicates the test port. bits 31-24: reserved bits 23-16: slot index bits 15-8: subcard index bits 7-0: port index
INT hwEntPotsCircuitTestBusyFlag	1.3.6.1.4.1.2011.5.25.314.1.3	INTEGER	read-write	Indicates the process method, when the test port is busy.
I32 hwEntPotsCircuitTestTimeOut	1.3.6.1.4.1.2011.5.25.314.1.4	Integer32	read-write	Indicates the time out of busy. (Unit: min) Default: 30
INT hwEntPotsCircuitTestTimeProc	1.3.6.1.4.1.2011.5.25.314.1.5	INTEGER	read-write	Indicates the process method afert time out.
INT hwEntPotsCircuitTestStatus	1.3.6.1.4.1.2011.5.25.314.1.6	INTEGER	read-only	Indicates the test result.
INT hwEntPotsCircuitTestDigitalVoltageResult	1.3.6.1.4.1.2011.5.25.314.1.7	INTEGER	read-only	Indicates the test result of digital voltage.
INT hwEntPotsCircuitTestLowBatteryResult	1.3.6.1.4.1.2011.5.25.314.1.8	INTEGER	read-only	Indicates the test result of low battery.
INT hwEntPotsCircuitTestHighBatteryResult	1.3.6.1.4.1.2011.5.25.314.1.9	INTEGER	read-only	Indicates the test result of high battery.
INT hwEntPotsCircuitTestPositiveBatteryResult	1.3.6.1.4.1.2011.5.25.314.1.10	INTEGER	read-only	Indicates the test result of positive battery. Default: enable(1)
INT hwEntPotsCircuitTestVAGResult	1.3.6.1.4.1.2011.5.25.314.1.11	INTEGER	read-only	Indicates the test result of a-ground voltage.
INT hwEntPotsCircuitTestVBGResult	1.3.6.1.4.1.2011.5.25.314.1.12	INTEGER	read-only	Indicates the test result of b-ground voltage.
INT hwEntPotsCircuitTestLoopCurrentResult	1.3.6.1.4.1.2011.5.25.314.1.13	INTEGER	read-only	Indicates the test result of loop current.
INT hwEntPotsCircuitTestFeederVoltageResult	1.3.6.1.4.1.2011.5.25.314.1.14	INTEGER	read-only	Indicates the test result of feeder voltage.
INT hwEntPotsCircuitTestRingingCurrentVoltageResult	1.3.6.1.4.1.2011.5.25.314.1.15	INTEGER	read-only	Indicates the test result of ringing current voltage.
INT hwEntPotsCircuitTestRingingCurrentFrequencyResult	1.3.6.1.4.1.2011.5.25.314.1.16	INTEGER	read-only	Indicates the test result of ringing current frequency.
I32 hwEntPotsCircuitTestFeedervoltageValue	1.3.6.1.4.1.2011.5.25.314.1.17	Integer32	read-only	Indicates the feeder voltage. (Unit: v)
I32 hwEntPotsCircuitTestRingingCurrentVoltageValue	1.3.6.1.4.1.2011.5.25.314.1.18	Integer32	read-only	Indicates the ringing current voltage. (Unit: v)
I32 hwEntPotsCircuitTestLoopCurrentValue	1.3.6.1.4.1.2011.5.25.314.1.19	Integer32	read-only	Indicates the loop current. (Unit: mA)
hwEntPotsLoopTestTable	1.3.6.1.4.1.2011.5.25.314.2
INT hwEntPotsLoopTestOprType	1.3.6.1.4.1.2011.5.25.314.2.1	INTEGER	read-write	Indicates the operation type
I32 hwEntPotsLoopTestPort	1.3.6.1.4.1.2011.5.25.314.2.2	Integer32	read-write	Indicates the test port. bits 31-24: reserved bits 23-16: slot index bits 15-8: subcard index bits 7-0: port index
INT hwEntPotsLoopTestBusyFlag	1.3.6.1.4.1.2011.5.25.314.2.3	INTEGER	read-write	Indicates the process method, when the test port is busy.
I32 hwEntPotsLoopTestTimeOut	1.3.6.1.4.1.2011.5.25.314.2.4	Integer32	read-write	Indicates the time out of busy. (Unit: min) Default: 30
INT hwEntPotsLoopTestTimeProc	1.3.6.1.4.1.2011.5.25.314.2.5	INTEGER	read-write	Indicates the process method, after the time out of busy.
INT hwEntPotsLoopTestVoltage	1.3.6.1.4.1.2011.5.25.314.2.6	INTEGER	read-write	Indicates the test result of voltage.
INT hwEntPotsLoopTestResistance	1.3.6.1.4.1.2011.5.25.314.2.7	INTEGER	read-write	Indicates the test result of resistance.
INT hwEntPotsLoopTestCapacitance	1.3.6.1.4.1.2011.5.25.314.2.8	INTEGER	read-write	Indicates the test result of capacitance.
INT hwEntPotsLoopTestLoopResistance	1.3.6.1.4.1.2011.5.25.314.2.9	INTEGER	read-write	Indicates the test result of loop resistance.
INT hwEntPotsLoopTestInverseResistance	1.3.6.1.4.1.2011.5.25.314.2.10	INTEGER	read-write	Indicates the test result of inverse resistance.
INT hwEntPotsLoopTestStatus	1.3.6.1.4.1.2011.5.25.314.2.11	INTEGER	read-only	Indicates the test status.
I32 hwEntPotsLoopTestConclusion	1.3.6.1.4.1.2011.5.25.314.2.12	Integer32	read-only	Indicates the test conclusion.
I32 hwEntPotsLoopTestACAGnd	1.3.6.1.4.1.2011.5.25.314.2.13	Integer32	read-only	Indicates the a-ground AC voltage. (Unit: v)
I32 hwEntPotsLoopTestACBGnd	1.3.6.1.4.1.2011.5.25.314.2.14	Integer32	read-only	Indicates the b-ground AC voltage. (Unit: v)
I32 hwEntPotsLoopTestACAB	1.3.6.1.4.1.2011.5.25.314.2.15	Integer32	read-only	Indicates the a-b AC voltage. (Unit: v)
I32 hwEntPotsLoopTestDCAGnd	1.3.6.1.4.1.2011.5.25.314.2.16	Integer32	read-only	Indicates the a-ground DC voltage. (Unit: v)
I32 hwEntPotsLoopTestDCBGnd	1.3.6.1.4.1.2011.5.25.314.2.17	Integer32	read-only	Indicates the b-ground DC voltage. (Unit: v)
I32 hwEntPotsLoopTestDCAB	1.3.6.1.4.1.2011.5.25.314.2.18	Integer32	read-only	Indicates the a-b DC voltage. (Unit: v)
I32 hwEntPotsLoopTestRAGnd	1.3.6.1.4.1.2011.5.25.314.2.19	Integer32	read-only	Indicates the a-ground resistance. (Unit: )
I32 hwEntPotsLoopTestRBGnd	1.3.6.1.4.1.2011.5.25.314.2.20	Integer32	read-only	Indicates the b-ground resistance. (Unit: )
I32 hwEntPotsLoopTestRAB	1.3.6.1.4.1.2011.5.25.314.2.21	Integer32	read-only	Indicates the a-b resistance. (Unit: )
I32 hwEntPotsLoopTestCAGnd	1.3.6.1.4.1.2011.5.25.314.2.22	Integer32	read-only	Indicates the a-ground capacitance. (Unit: F)
I32 hwEntPotsLoopTestCBGnd	1.3.6.1.4.1.2011.5.25.314.2.23	Integer32	read-only	Indicates the b-ground capacitance. (Unit: F)
I32 hwEntPotsLoopTestCAB	1.3.6.1.4.1.2011.5.25.314.2.24	Integer32	read-only	Indicates the a-b capacitance. (Unit: F)
I32 hwEntPotsLoopTestLR	1.3.6.1.4.1.2011.5.25.314.2.25	Integer32	read-only	Indicates the loop resistance. (Unit: )
I32 hwEntPotsLoopTestRRevPole	1.3.6.1.4.1.2011.5.25.314.2.26	Integer32	read-only	Indicates the rev pole resistance. (Unit: )
INT hwEntPotsLoopTestMSocket	1.3.6.1.4.1.2011.5.25.314.2.27	INTEGER	read-only	Indicates the MSocket.
hwEntPotsPathTestTable	1.3.6.1.4.1.2011.5.25.314.3
I32 hwEntPotsPathTestPort	1.3.6.1.4.1.2011.5.25.314.3.1	Integer32	read-write	Indicates the test port. bits 31-24: reserved bits 23-16: slot index bits 15-8: subcard index bits 7-0: port index
INT hwEntPotsPathTestMode	1.3.6.1.4.1.2011.5.25.314.3.2	INTEGER	read-write	Indicates the test type.
I32 hwEntPotsPathTestAssistPort	1.3.6.1.4.1.2011.5.25.314.3.3	Integer32	read-write	Indicates the assist port. bits 31-24: reserved bits 23-16: slot index bits 15-8: subcard index bits 7-0: port index
STR hwEntPotsPathTestDestTelno	1.3.6.1.4.1.2011.5.25.314.3.4	DisplayString	read-write	Indicates the destination telephone number.
INT hwEntPotsPathTestOprType	1.3.6.1.4.1.2011.5.25.314.3.5	INTEGER	read-write	Indicates the operation type.
I32 hwEntPotsPathTestResult	1.3.6.1.4.1.2011.5.25.314.3.6	Integer32	read-only	Indicates the test result.
hwEntLineTestConfigTable	1.3.6.1.4.1.2011.5.25.314.4
I32 hwEntLineTestACVolGate	1.3.6.1.4.1.2011.5.25.314.4.1	Integer32	read-write	Indicates the AC voltage gate. (Unit: v) Default: 55
I32 hwEntLineTestDCVolGate	1.3.6.1.4.1.2011.5.25.314.4.2	Integer32	read-write	Indicates the DC voltage gate. (Unit: v) Default: 40
I32 hwEntLineTestResistGate	1.3.6.1.4.1.2011.5.25.314.4.3	Integer32	read-write	Indicates the resistance gate. (Unit: ) Default: 20000
I32 hwEntLineTestOffHookRABLow	1.3.6.1.4.1.2011.5.25.314.4.4	Integer32	read-write	Indicates the low limit of a-b resistance in off hook. (Unit: ) Default: 100
I32 hwEntLineTestOffHookRABUp	1.3.6.1.4.1.2011.5.25.314.4.5	Integer32	read-write	Indicates the up limit of a-b resistance in off hook. (Unit: ) Default: 100000
I32 hwEntLineTestLRLow	1.3.6.1.4.1.2011.5.25.314.4.6	Integer32	read-write	Indicates the low limit of loop resistance. (Unit: ) Default: 100
I32 hwEntLineTestLRLUp	1.3.6.1.4.1.2011.5.25.314.4.7	Integer32	read-write	Indicates the up limit of loop resistance. (Unit: ) Default: 2000
I32 hwEntLineTestSelfMixRAB	1.3.6.1.4.1.2011.5.25.314.4.8	Integer32	read-write	Indicates the a-b resistance of mix. (Unit: ) Default: 2000
I32 hwEntLineTestInsRABLow	1.3.6.1.4.1.2011.5.25.314.4.9	Integer32	read-write	Indicates the low limit of a-b resistance. (Unit: ) Default: 2000
I32 hwEntLineTestInsRABUp	1.3.6.1.4.1.2011.5.25.314.4.10	Integer32	read-write	Indicates the up limit of a-b resistance. (Unit: ) Default: 20000
I32 hwEntLineTestCapACUpGate	1.3.6.1.4.1.2011.5.25.314.4.11	Integer32	read-write	Indicates the ground capacitance up gate. (Unit: nF) Default: 700
I32 hwEntLineTestCapGroundNormalGate	1.3.6.1.4.1.2011.5.25.314.4.12	Integer32	read-write	Indicates the ground capacitance normal gate. (Unit: nF) Default: 200
I32 hwEntLineTestCapACLowGate	1.3.6.1.4.1.2011.5.25.314.4.13	Integer32	read-write	Indicates the ground capacitance low gate. (Unit: nF) Default: 350
I32 hwEntLineTestCapGroundNormalSmallGate	1.3.6.1.4.1.2011.5.25.314.4.14	Integer32	read-write	Indicates the ground capacitance normal small gate. (Unit: nF) Default: 350
I32 hwEntLineTestAdjustCAB	1.3.6.1.4.1.2011.5.25.314.4.15	Integer32	read-write	Indicates the a-b adjest capacitance. (Unit: nF)
I32 hwEntLineTestAdjustCAG	1.3.6.1.4.1.2011.5.25.314.4.16	Integer32	read-write	Indicates the a-ground adjest capacitance. (Unit: nF)
I32 hwEntLineTestAdjustCBG	1.3.6.1.4.1.2011.5.25.314.4.17	Integer32	read-write	Indicates the b-ground adjest capacitance. (Unit: nF)
I32 hwEntLineTestAdjustRAB	1.3.6.1.4.1.2011.5.25.314.4.18	Integer32	read-write	Indicates the a-b adjest resistance. (Unit: )
I32 hwEntLineTestAdjustCutPort	1.3.6.1.4.1.2011.5.25.314.4.19	Integer32	read-write	Indicates the adjest cut port. bits 31-24: reserved bits 23-16: slot index bits 15-8: subcard index bits 7-0: port index
I32 hwEntLineTestAdjustSelfMixPort	1.3.6.1.4.1.2011.5.25.314.4.20	Integer32	read-write	Indicates the adjest self mix port. bits 31-24: reserved bits 23-16: slot index bits 15-8: subcard index bits 7-0: port index
hwEntCallerEmulateTable	1.3.6.1.4.1.2011.5.25.314.5		not-accessible	A list of hwEntCallerEmulateEntry objects.
hwEntCallerEmulateEntry	1.3.6.1.4.1.2011.5.25.314.5.1		not-accessible	A list of hwEntCallerEmulateEntry objects.
I32 hwEntCallerEmulatePort	1.3.6.1.4.1.2011.5.25.314.5.1.1	Integer32	read-only	Indicates the caller port. bits 31-24: reserved bits 23-16: slot index bits 15-8: subcard index bits 7-0: port index
INT hwEntCallerEmulateOprType	1.3.6.1.4.1.2011.5.25.314.5.1.2	INTEGER	read-write	Indicates the operation type.
STR hwEntCallerEmulateTelno	1.3.6.1.4.1.2011.5.25.314.5.1.3	DisplayString	read-write	Indicates the telephone number.
I32 hwEntCallerEmulateStatus	1.3.6.1.4.1.2011.5.25.314.5.1.4	Integer32	read-only	Indicates the test status.
hwEntCalledEmulateTable	1.3.6.1.4.1.2011.5.25.314.6		not-accessible	A list of hwEntCalledEmulateEntry objects.
hwEntCalledEmulateEntry	1.3.6.1.4.1.2011.5.25.314.6.1		not-accessible	A list of hwEntCalledEmulateEntry objects.
I32 hwEntCalledEmulatePort	1.3.6.1.4.1.2011.5.25.314.6.1.1	Integer32	read-only	Indicates the caller port. bits 31-24: reserved bits 23-16: slot index bits 15-8: subcard index bits 7-0: port index
INT hwEntCalledEmulateOprType	1.3.6.1.4.1.2011.5.25.314.6.1.2	INTEGER	read-write	Indicates the operation type.
I32 hwEntCalledEmulateStatus	1.3.6.1.4.1.2011.5.25.314.6.1.3	Integer32	read-only	Indicates the test status.
hwEntCallEmulateTable	1.3.6.1.4.1.2011.5.25.314.7		not-accessible	A list of hwEntCallEmulateEntry objects.
hwEntCallEmulateEntry	1.3.6.1.4.1.2011.5.25.314.7.1		not-accessible	A list of hwEntCallEmulateEntry objects.
I32 hwEntCallEmulateIndex	1.3.6.1.4.1.2011.5.25.314.7.1.1	Integer32	read-only	Indicates the test index.
INT hwEntCallEmulateOprType	1.3.6.1.4.1.2011.5.25.314.7.1.2	INTEGER	read-write	Indicates the operation type.
I32 hwEntCallEmulateCallerPort	1.3.6.1.4.1.2011.5.25.314.7.1.3	Integer32	read-write	Indicates the calller port.
I32 hwEntCallEmulateCalledPort	1.3.6.1.4.1.2011.5.25.314.7.1.4	Integer32	read-write	Indicates the callled port.
STR hwEntCallEmulateCalledTelno	1.3.6.1.4.1.2011.5.25.314.7.1.5	DisplayString	read-write	Indicates the telephone number.
I32 hwEntCallEmulateStatus	1.3.6.1.4.1.2011.5.25.314.7.1.6	Integer32	read-only	Indicates the call status.
I32 hwEntCallEmulateResult	1.3.6.1.4.1.2011.5.25.314.7.1.7	Integer32	read-only	Indicates the call result.
hwEntVoiceTestTraps	1.3.6.1.4.1.2011.5.25.314.8
NTF hwEntPotsCircuitTestTrap	1.3.6.1.4.1.2011.5.25.314.8.1			circuit test result.
NTF hwEntPotsLoopTestTrap	1.3.6.1.4.1.2011.5.25.314.8.2			Loop test result.
NTF hwEntPotsPathTestTrap	1.3.6.1.4.1.2011.5.25.314.8.3			Path test result.
NTF hwEntCallEmulateTrap	1.3.6.1.4.1.2011.5.25.314.8.4			Call emulate result.
hwEntVoiceDiagnoseConformance	1.3.6.1.4.1.2011.5.25.314.9
hwEntVoiceDiagnoseCompliances	1.3.6.1.4.1.2011.5.25.314.9.1
hwEntVoiceDiagnoseCompliance	1.3.6.1.4.1.2011.5.25.314.9.1.1			The compliance statement for systems supporting the this module.
hwEntVoiceDiagnoseGroups	1.3.6.1.4.1.2011.5.25.314.9.2
hwEntPotsCircuitTestGroup	1.3.6.1.4.1.2011.5.25.314.9.2.1			The hwEntPotsCircuitTest group.
hwEntPotsLoopTestGroup	1.3.6.1.4.1.2011.5.25.314.9.2.2			The hwEntPotsLoopTest group.
hwEntPotsPathTestGroup	1.3.6.1.4.1.2011.5.25.314.9.2.3			The hwEntPotsPathTest group.
hwEntLineTestConfigGroup	1.3.6.1.4.1.2011.5.25.314.9.2.4			The EntLineTest Config group.
hwEntCallerEmulateGroup	1.3.6.1.4.1.2011.5.25.314.9.2.5			The EntCaller Emulate Group.
hwEntCalledEmulateGroup	1.3.6.1.4.1.2011.5.25.314.9.2.6			The EntCalled Emulate group.
hwEntCallEmulateGroup	1.3.6.1.4.1.2011.5.25.314.9.2.7			The EntCallEmulate group.
hwEntVoiceTestTrapDefineGroup	1.3.6.1.4.1.2011.5.25.314.9.2.8			The EntVoiceTest Trap group.

RFC description

Provides POTS circuit diagnostic testing on Huawei voice gateway equipment.

Start monitoring Huawei enterprise voice gateway/router (VoIP quality diagnostics) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-ENT-VOICE-DIAGNOSE-MIB

What Is HUAWEI-ENT-VOICE-DIAGNOSE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description