All MIBs › HPN-ICF-VOICE-IF-MIB › hpnicfVoiceIfCfgTimerDialInterval
hpnicfVoiceIfCfgTimerDialInterval
Module: HPN-ICF-VOICE-IF-MIB
OID (symbolic): HPN-ICF-VOICE-IF-MIB::hpnicfVoiceIfCfgTimerDialInterval
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.7
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The interval, in seconds, between two dialing numbers. The default value of this object is 10 seconds. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 with loop-start or ground-start protocol voice subscriber line.
What is hpnicfVoiceIfCfgTimerDialInterval?
This object sets, in seconds, the interval allowed between two dialed digits on FXO, FXS, E&M, and loop-start or ground-start E1/T1 voice subscriber lines, defaulting to 10 seconds. Admins shorten or lengthen it to match expected dialing pace, since a value that's too short can cut off slow dialers mid-number. For example, increasing hpnicfVoiceIfCfgTimerDialInterval to 15 seconds accommodates a PBX that pauses between digit groups when relaying calls.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.7 snmpwalk -v2c -c public <target> HPN-ICF-VOICE-IF-MIB::hpnicfVoiceIfCfgTimerDialInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.7.1 snmpget -v2c -c public <target> HPN-ICF-VOICE-IF-MIB::hpnicfVoiceIfCfgTimerDialInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.7.1 i <value>
Start monitoring HP/H3C Comware voice gateway equipment (voice interface general config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-VOICE-IF-MIB::hpnicfVoiceIfCfgTimerDialInterval OID value, configure state conditions and alerts, and monitor any HP/H3C Comware voice gateway equipment (voice interface general config) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.39 | hpnicfVoice | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.39.13 | hpnicfVoiceInterface | HPN-ICF-VOICE-IF-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1 | hpnicfVoiceIfObjects | HPN-ICF-VOICE-IF-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1 | hpnicfVoiceIfConfigTable | HPN-ICF-VOICE-IF-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1 | hpnicfVoiceIfConfigEntry | HPN-ICF-VOICE-IF-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.7 | hpnicfVoiceIfCfgTimerDialInterval | HPN-ICF-VOICE-IF-MIB |