All MIBs › HPN-ICF-DVPN-MIB
Last Updated: 2005-07-01
Category: Technology: VPN, Vendor: H3C/HH3C, Vendor: HP/HPE
Description: Manages Dynamic Virtual Private Network (DVPN) tunnels and sessions on HP/Comware networking devices.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HPN-ICF-DVPN-MIB?
HPN-ICF-DVPN-MIB is an HP/H3C (Comware) MIB for managing Dynamic Virtual Private Network (DVPN) tunnels and sessions on HP/HPN networking routers. Per its own description it applies to routers, and it notes that some objects are product-specific, so administrators should consult vendor documentation for full applicability. Its monitoring focus is DVPN session/tunnel status, the configuration and operational state of dynamic VPN tunnels, reflecting the software-level health of the VPN overlay rather than physical hardware sensors and revealing tunnels that fail to establish or drop unexpectedly. It is part of HP's ICF (Intelligent Configuration Framework) MIB family, used alongside other Comware ICF MIBs for consistent configuration-management conventions across HP/H3C router features. It is typically deployed on HP/H3C (Comware-based) routers providing dynamic hub-and-spoke or full-mesh VPN connectivity, with HPN-ICF-DVPN-MIB SNMP monitoring giving operators visibility into which tunnels are established versus failed.
IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-DVPN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- HP/H3C (Comware-based) routers
Monitoring Examples
This MIB's sample object list is empty in the source data, so specific OID names cannot be cited here. Based on the module description, an operator would poll DVPN tunnel/session tables to check which dynamic tunnels are established and which have failed. The MIB explicitly notes some objects are product-specific and may not apply uniformly across HP/H3C router models, so an admin should confirm applicability against vendor documentation before relying on a given object.
What Can Be Monitored
- DVPN tunnel status
- DVPN session configuration
- tunnel establishment state
This MIB depends on
Related MIBs
Imported Objects
From HPN-ICF-OID-MIB
| hpnicfCommon | OBJECT-IDENTITY |
From IF-MIB
| ifIndex | OBJECT-TYPE |
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 |
From SNMPv2-TC
| RowStatus | |
| TEXTUAL-CONVENTION |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hpnicfDvpn | 1.3.6.1.4.1.11.2.14.11.15.2.57 | This MIB is Dynamic Virtual Private Network(Dvpn) mib. This MIB is applicable to router. Some objects in this may be used only for some specific products, so users should refer to the related documents to acquire more detail information. | ||
| hpnicfDvpnMibObjects | 1.3.6.1.4.1.11.2.14.11.15.2.57.1 | |||
| hpnicfDvpnMibGlobal | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.1 | |||
| INT hpnicfDvpnServiceEnable | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.1 | INTEGER | read-write | Dvpn service enable or disable. If dvpn service is 'disable', dvpn service can not be used. |
| I32 hpnicfDvpnClassNumber | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.2 | Integer32 | read-only | The number of dvpn classes. It is only used on client. |
| I32 hpnicfDvpnClientNumber | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.3 | Integer32 | read-only | The number of clients which register on the server. When a session of server to client type is built, add 1 to the value of this node. It is only used on server. |
| I32 hpnicfDvpnMapAgeTime | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.4 | Integer32 | read-write | Dvpn map age time, the unit is second. It is only used on server. |
| I32 hpnicfDvpnClientRegisterInterval | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.5 | Integer32 | read-write | The length of time between the registering of client, the unit is second. It is only used on client. |
| I32 hpnicfDvpnClientRegisterDumb | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.6 | Integer32 | read-write | The length of time when client dumbs, the unit is second. It is only used on client. |
| I32 hpnicfDvpnClientRegisterRetry | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.7 | Integer32 | read-write | Regist retry times of client after register fail. It is only used on client. |
| U32 hpnicfDvpnInputPkt | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.8 | Unsigned32 | read-only | The number of recieved packets. |
| U32 hpnicfDvpnDropPkt | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.9 | Unsigned32 | read-only | The number of packets have been droped. |
| U32 hpnicfDvpnOutputPkt | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.10 | Unsigned32 | read-only | The number of packets have been sent. |
| U32 hpnicfDvpnOutputErrorPkt | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.11 | Unsigned32 | read-only | The number of output error packets. |
| U32 hpnicfDvpnEncryptErrorPkt | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.12 | Unsigned32 | read-only | The number of packets have been encrypted wrongly. |
| INT hpnicfDvpnCurrentDeviceRole | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.13 | INTEGER | read-only | The current role of the device. The value is decided by the configuration of the tunnel-interface. |
| I32 hpnicfDvpnDomainNumber | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.14 | Integer32 | read-only | The number of dvpn domains. |
| I32 hpnicfDvpnMapNumber | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.15 | Integer32 | read-only | The number of dvpn maps. |
| I32 hpnicfDvpnSessionNumber | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.16 | Integer32 | read-only | The number of dvpn sessiones including the session of all states. |
| OCT hpnicfDvpnServerPreSharedKey | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.17 | OCTET STRING | read-write | The pre-shared-key of server. It is only used on server. |
| INT hpnicfDvpnMapTrapEnable | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.18 | INTEGER | read-write | Dvpn map trap enable or disable. |
| INT hpnicfDvpnSessionTrapEnable | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.19 | INTEGER | read-write | Dvpn session trap enable or disable. |
| INT hpnicfDvpnVersion | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.20 | INTEGER | read-only | Dvpn version. |
| I32 hpnicfDvpnClearDomainAllConection | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.21 | Integer32 | read-write | Clear all dvpn conects in the domain, the parameter is the id of the domain. |
| I32 hpnicfDvpnClearDvpnStaInfo | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.22 | Integer32 | read-write | Clear the statistic information of dvpn. |
| U32 hpnicfDvpnTotalRedirectNumber | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.23 | Unsigned32 | read-only | The number of redirect packets. It is only used on server. |
| INT hpnicfDvpnGlobalAuthenClientType | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.24 | INTEGER | read-write | Dvpn global authentication type being used by server to client. The value is decided by the configuration by the user. |
| OCT hpnicfDvpnGlobalUserDefAAADomain | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.25 | OCTET STRING | read-write | Dvpn global AAA domain of the user. The domain will decide the authentication server which is used by the dvpn server to authenticate dvpn client. |
| OCT hpnicfDvpnLocalDeviceId | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.26 | OCTET STRING | read-only | The device ID, it is a string. |
| I32 hpnicfDvpnSessionHisAgeTime | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.27 | Integer32 | read-write | The age-time of the hpnicfDvpnSessionHisTable table. The unit is hour. |
| INT hpnicfDvpnSessionHisReset | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.28 | INTEGER | read-write | The reset flag of dvpn hpnicfDvpnSessionHisTable table. |
| hpnicfDvpnMibTableTroop | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2 | |||
| hpnicfDvpnPolicyTable | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.1 | not-accessible | The dvpn policy table. It is used on dvpn server. | |
| hpnicfDvpnPolicyEntry | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.1.1 | not-accessible | The entry of hpnicfDvpnPolicyTable. | |
| OCT hpnicfDvpnPolicyName | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.1.1.1 | OCTET STRING | not-accessible | The name of Dvpn policy. |
| INT hpnicfDvpnPoAuthenClientType | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.1.1.2 | INTEGER | read-create | The authentication type used by server to client. The value is decided by the policy configuration of the user. The default value is none. |
| DVP hpnicfDvpnPoSessionAlgorithmSuite | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.1.1.3 | DvpnAlgorithmSuite | read-create | The algorithm suite used when session is created. |
| I32 hpnicfDvpnPoSessionIdleTime | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.1.1.4 | Integer32 | read-create | The session idle time, the unit is second. |
| I32 hpnicfDvpnPoSessionKeepTime | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.1.1.5 | Integer32 | read-create | The session keepalive time, the unit is second. |
| I32 hpnicfDvpnPoSessionSetupInterval | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.1.1.6 | Integer32 | read-create | The session setup interval time, the unit is second. |
| DVP hpnicfDvpnPoDataAlgorithmSuite | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.1.1.7 | DvpnAlgorithmSuite | read-create | The algorithm suite used by the session for createing ipsec sa. |
| I32 hpnicfDvpnPoSaSeconds | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.1.1.8 | Integer32 | read-create | The duration of DVPN IPSec security association. The unit is second. |
| OCT hpnicfDvpnPoUserDefAAADomain | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.1.1.9 | OCTET STRING | read-create | Dvpn policy AAA domain of the user. The domain will decide the authentication server which used by the dvpn server to authenticate dvpn client. |
| I32 hpnicfDvpnPoRefTimes | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.1.1.10 | Integer32 | read-only | The total times of the policy being used by dvpn. |
| ROW hpnicfDvpnPoRowStatus | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.1.1.11 | RowStatus | read-create | The status of this conceptual row. We support the characteristic of active(1),createAndGo(4),destroy(6). |
| hpnicfDvpnDomainInfoTable | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.2 | not-accessible | The dvpn domain table. | |
| hpnicfDvpnDomainInfoEntry | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.2.1 | not-accessible | The entry of hpnicfDvpnDomainInfoTable. | |
| I32 hpnicfDvpnDomainID | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.2.1.1 | Integer32 | not-accessible | Dvpn domain ID. |
| U32 hpnicfDvpnDomainSessionNum | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.2.1.2 | Unsigned32 | read-only | The number of session in this dvpn domain. |
| U32 hpnicfDvpnDomainRedirectNum | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.2.1.3 | Unsigned32 | read-only | The number of redirect packets in this dvpn domain. |
| U32 hpnicfDvpnDomainInputPkt | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.2.1.4 | Unsigned32 | read-only | The number of input packets in this dvpn domain. |
| U32 hpnicfDvpnDomainDropPkt | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.2.1.5 | Unsigned32 | read-only | The number of drop packets in this dvpn domain. |
| U32 hpnicfDvpnDomainOutputPkt | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.2.1.6 | Unsigned32 | read-only | The number of output packets in this dvpn domain. |
| U32 hpnicfDvpnDomainOutputErrorPkt | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.2.1.7 | Unsigned32 | read-only | The number of output error packets in this dvpn domain. |
| U32 hpnicfDvpnDomainEncryptErrorPkt | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.2.1.8 | Unsigned32 | read-only | The number of encrypt error packets in this dvpn domain. |
| hpnicfDvpnClassTable | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.3 | not-accessible | The Dvpn class table. It is only used on dvpn client. | |
| hpnicfDvpnClassEntry | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.3.1 | not-accessible | The entry of the hpnicfDvpnClassTable. | |
| OCT hpnicfDvpnClassName | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.3.1.1 | OCTET STRING | not-accessible | The dvpn class name. It is the index of hpnicfDvpnClassTable. |
| IPt hpnicfDvpnClServerPublicIpType | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.3.1.2 | InetAddressType | read-create | Dvpn server public ip type (ipv4, ipv6). |
| IP hpnicfDvpnClServerPublicIp | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.3.1.3 | InetAddress | read-create | Dvpn server public ip address. |
| IPt hpnicfDvpnClServerPriIpType | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.3.1.4 | InetAddressType | read-create | Dvpn server private ip type (ipv4, ipv6). |
| IP hpnicfDvpnClServerPriIp | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.3.1.5 | InetAddress | read-create | Dvpn server private ip address. |
| DVP hpnicfDvpnClAlgorithmSuite | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.3.1.6 | DvpnAlgorithmSuite | read-create | The algorithm suite used by the client when sending registry packets to the server. 'dvpnAlgorithmNone' is not supported here. |
| INT hpnicfDvpnClAuthenServerType | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.3.1.7 | INTEGER | read-create | The authentication type being used by client to server. The value is decided by the class configuration of the user. The default value is none. |
| OCT hpnicfDvpnClPreShareKey | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.3.1.8 | OCTET STRING | read-create | Dvpn PreShareKey. It is used when the method used by client when authenticating server is pre-share-key, only when the value of the key is the same as that on the server, the client can authenticate server successfully. |
| OCT hpnicfDvpnClUserName | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.3.1.9 | OCTET STRING | read-create | Dvpn UserName. It is configured by the user. |
| INT hpnicfDvpnClPwdEncrypted | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.3.1.10 | INTEGER | read-create | Dvpn password encrypted or not. |
| OCT hpnicfDvpnClPasswd | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.3.1.11 | OCTET STRING | read-create | Dvpn password. It is configured by the user. |
| ROW hpnicfDvpnClassRowStatus | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.3.1.12 | RowStatus | read-create | The status of this conceptual row. Only 'active', 'createAndGo' and 'destroy' are supported. |
| hpnicfDvpnTunnelTable | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.4 | not-accessible | The dvpn tunnel table. | |
| hpnicfDvpnTunnelEntry | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.4.1 | not-accessible | The Entry of hpnicfDvpnTunnelTable. | |
| INT hpnicfDvpnTunnelInterfaceType | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.4.1.1 | INTEGER | read-write | The type of dvpn tunnel (client or server). |
| I32 hpnicfDvpnTunnelAcl | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.4.1.2 | Integer32 | read-write | The security acl used by the tunnel. If a packet permits the rules, it will not be encrypted. |
| INT hpnicfDvpnTunnelClientRegType | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.4.1.3 | INTEGER | read-write | The register type used by the client . Only the interface type is client, it can be used. undistributed: If a client send a packet to the client with this configuration, setver will only forward the packet whitout sending redirect packets. forward: The client with this configuration will only send packets forwarded by server, which means it can not initiate to build a session with other clients. undistributedandforward: The client with this configuration have the characteristics of both 'forward' and 'undistributed'. normal: The client with this configuration can build session with other clients without any restriction. |
| I32 hpnicfDvpnTunnelDvpnId | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.4.1.4 | Integer32 | read-write | The dvpn ID used by the tunnel. The dvpn ID is 0 means that user does not configure dvpn ID. User can not configure a dvpn ID with 0. |
| OCT hpnicfDvpnTunnelPolicy | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.4.1.5 | OCTET STRING | read-write | The dvpn policy used by the tunnel. Only the interface type is server, it can be used. |
| OCT hpnicfDvpnTunnelClass | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.4.1.6 | OCTET STRING | read-write | The dvpn class used by the tunnel. Only the interface type is client, it can be used. |
| hpnicfDvpnMapTable | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5 | not-accessible | The dvpn map table. | |
| hpnicfDvpnMapEntry | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1 | not-accessible | The entry of the hpnicfDvpnMapTable. | |
| U32 hpnicfDvpnMapIndex | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.1 | Unsigned32 | accessible-for-notify | The index of hpnicfDvpnMapTable. |
| OCT hpnicfDvpnMapPeerDeviceId | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.2 | OCTET STRING | read-only | The identifier of peer device. It is a string. |
| U32 hpnicfDvpnMapDvpnId | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.3 | Unsigned32 | read-only | The ID of the dvpn domain which the map belongs to. The dvpn ID is 0 means that the map has not been built. It has not gotten the dvpn ID at that time. |
| TIK hpnicfDvpnMapBuildTime | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.4 | TimeTicks | read-only | The time of the map created, the unit is second. |
| IPt hpnicfDvpnMapPeerPriIpType | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.5 | InetAddressType | read-only | The private ip type (ipv4, ipv6) of map peer device. |
| IP hpnicfDvpnMapPeerPriIp | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.6 | InetAddress | read-only | The private ip of map peer device. |
| IPt hpnicfDvpnMapPeerPublicIpType | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.7 | InetAddressType | read-only | The public ip type (ipv4, ipv6) of map peer device. |
| IP hpnicfDvpnMapPeerPublicIp | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.8 | InetAddress | read-only | The public ip of map peer device. |
| IPt hpnicfDvpnMapLocalPriIpType | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.9 | InetAddressType | read-only | The private ip type (ipv4, ipv6) of map local device. |
| IP hpnicfDvpnMapLocalPriIp | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.10 | InetAddress | read-only | The private ip of map local device. |
| IPt hpnicfDvpnMapLocalPublicIpType | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.11 | InetAddressType | read-only | The public ip type (ipv4, ipv6) of map local device. |
| IP hpnicfDvpnMapLocalPublicIp | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.12 | InetAddress | read-only | The public ip of map local device. |
| OCT hpnicfDvpnMapUserName | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.13 | OCTET STRING | read-only | The user name used by the client registering to server. If the client is not been authenticated, this is a null string. |
| I32 hpnicfDvpnMapUdpPort | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.14 | Integer32 | read-only | The udp port used by map peer device. |
| U32 hpnicfDvpnMapControlId | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.15 | Unsigned32 | read-only | Dvpn map control ID. |
| DVP hpnicfDvpnMapType | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.16 | DvpnCommunicateType | read-only | The type of the map. 'clientToclient' is not supported here. |
| INT hpnicfDvpnMapState | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.17 | INTEGER | read-only | mapClientInit: The client initiates the map. mapClientBegin: The client begins the process of registering to the server. mapClientAlgreq: The client requests to negotiate the algorithm. mapClientKexReq: The client requests to negotiate the key. mapClientAuthenReq: The client sends authentication information to the server. mapClientConfigReq: The client requests to get some configuration information from the server. Do not support now. mapClientReq: The client requests to register to the server. mapClientSuccess: The client registers to the server successfully. mapServerBegin: The server begins the process of receive a new register. mapServerAlgorithm:The sever begins to negotiate Algorithm. mapServerKexInit: The server replys to the algorithm negotiation packet from the client successfully and begin to negotiate key. mapServerAuthenInit: The server replys to the key negotiation packet from the client successfully and begin to authenticate client, in the case of the authentication-client method is not none. mapServerConfigInit: The server send some configuration information to client. Do not support now. mapServerInit: The server replys to the authentication packet from the client successfully and begin to receive client information. mapServerFinished: The server receives client information successfully. |
| hpnicfDvpnSessionTable | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6 | not-accessible | The dvpn session table. | |
| hpnicfDvpnSessionEntry | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1 | not-accessible | The entry of hpnicfDvpnSessionTable. | |
| I32 hpnicfDvpnSessionDvpnId | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.1 | Integer32 | accessible-for-notify | The ID of the dvpn domain which the session belongs to. |
| IPt hpnicfDvpnSessionPeerPriIpType | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.2 | InetAddressType | accessible-for-notify | The private ip type (ipv4, ipv6) of session peer device. |
| IP hpnicfDvpnSessionPeerPriIp | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.3 | InetAddress | accessible-for-notify | The private ip of the session peer device. |
| OCT hpnicfDvpnSessionPeerDeviceId | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.4 | OCTET STRING | read-only | The device ID of session peer device. It is a string. |
| TIK hpnicfDvpnSessionBuildTime | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.5 | TimeTicks | read-only | The time of the Session being built, the unit is second. |
| IPt hpnicfDvpnSessionPeerPubIpType | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.6 | InetAddressType | read-only | The public ip type (ipv4, ipv6) of session peer device. |
| IP hpnicfDvpnSessionPeerPubIp | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.7 | InetAddress | read-only | The public ip of session peer device. |
| IPt hpnicfDvpnSessionLocalPubIpType | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.8 | InetAddressType | read-only | The public ip type (ipv4, ipv6) of session local device. |
| IP hpnicfDvpnSessionLocalPubIp | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.9 | InetAddress | read-only | The public ip of session local device. |
| IPt hpnicfDvpnSessionLocalPriIpType | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.10 | InetAddressType | read-only | The private ip type (ipv4, ipv6) of session local device. |
| IP hpnicfDvpnSessionLocalPriIp | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.11 | InetAddress | read-only | The private ip of session local device. |
| I32 hpnicfDvpnSessionPeerUdpPort | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.12 | Integer32 | read-only | The udp port used by session peer device . |
| INT hpnicfDvpnSessionInitiator | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.13 | INTEGER | read-only | The flag of initiator. |
| OCT hpnicfDvpnSessionUserName | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.14 | OCTET STRING | read-only | The user's name. If the session type is client to client, the value of this object is a null string. |
| INT hpnicfDvpnSessionState | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.15 | INTEGER | read-only | The state of the session. sessionSetupInit: The initiation of the session. sessionSetupReq: The initiator requests to negotiate the SA and so on of the session. sessionSetupSuccess: The session has been built successfully. sessionRekeyReq: The initiator requests to renegotiate the SA. sessionRekeyRep: The passive side replies with a SA renegotiation response packet successfully. |
| DVP hpnicfDvpnSessionType | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.16 | DvpnCommunicateType | read-only | The type of the session. |
| INT hpnicfDvpnSessionPeerType | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.17 | INTEGER | read-only | The type of the session peer device. It may be client software or a router. |
| hpnicfDvpnSessionHisTable | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.7 | not-accessible | The dvpn session history table. This table contains session's history information, include input/output packet number, up/down time, etc. This table will exist during the 'hpnicfDvpnSessionHisAgeTime'. | |
| hpnicfDvpnSessionHisEntry | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.7.1 | not-accessible | The entry of hpnicfDvpnSessionHisTable. | |
| I32 hpnicfDvpnSessionHisDvpnID | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.7.1.1 | Integer32 | not-accessible | The ID of the dvpn domain which the session belongs to. |
| IPt hpnicfDvpnSessionHisPeerPriIPType | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.7.1.2 | InetAddressType | read-only | The private ip type (ipv4, ipv6) of session peer device. |
| IP hpnicfDvpnSessionHisPeerPriIP | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.7.1.3 | InetAddress | not-accessible | The private ip of the session peer device. |
| U32 hpnicfDvpnSessionHisSendPkt | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.7.1.4 | Unsigned32 | read-only | The number of sent packets on the session. |
| U32 hpnicfDvpnSessionHisRcvPkt | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.7.1.5 | Unsigned32 | read-only | The number of received packets on the session. |
| U32 hpnicfDvpnSessionHisOnlineNumber | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.7.1.6 | Unsigned32 | read-only | The number of the session online. |
| TIK hpnicfDvpnSessionHisFirstUpTime | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.7.1.7 | TimeTicks | read-only | The session first online time. |
| TIK hpnicfDvpnSessionHisLastUpTime | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.7.1.8 | TimeTicks | read-only | The session last online time. |
| TIK hpnicfDvpnSessionHisLastDownTime | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.7.1.9 | TimeTicks | read-only | The session last down time. |
| INT hpnicfDvpnSessionHisOnlineFlag | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.7.1.10 | INTEGER | read-only | If the session is online, the value is 'yes'. If the session is not online, the value is 'no'. |
| OCT hpnicfDvpnSessionHisPeerDeviceId | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.7.1.11 | OCTET STRING | read-only | The identifier of peer device. It is a string. |
| hpnicfDvpnMibNotification | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.3 | |||
| hpnicfDvpnNotification | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.3.0 | |||
| NTF hpnicfDvpnSessionBuildNotification | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.3.0.1 | Dvpn session build notification. | ||
| NTF hpnicfDvpnSessionDelNotification | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.3.0.2 | Dvpn session deleted notification. | ||
| NTF hpnicfDvpnMapBuildNotification | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.3.0.3 | Dvpn map build notification. | ||
| NTF hpnicfDvpnMapDelNotification | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.3.0.4 | Dvpn map deleted notification. | ||
| hpnicfDvpnMibConformance | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.4 | |||
| hpnicfDvpnMibCompliances | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.4.1 | |||
| hpnicfDvpnMibCompliance | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.4.1.1 | The compliance statement for entities which implement the DVPN MIB. | ||
| hpnicfDvpnMibGroups | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.4.2 | |||
| hpnicfDvpnGlobalGroup | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.4.2.1 | A collection of objects providing dvpn global information. | ||
| hpnicfDvpnPolicyGroup | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.4.2.2 | A collection of objects providing dvpn policy information. | ||
| hpnicfDvpnDomainInfoGroup | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.4.2.3 | A collection of objects providing dvpn domain information. | ||
| hpnicfDvpnClassGroup | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.4.2.4 | A collection of objects providing dvpn class information. | ||
| hpnicfDvpnTunnelGroup | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.4.2.5 | A collection of objects providing dvpn tunnel interface information. | ||
| hpnicfDvpnMapGroup | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.4.2.6 | A collection of objects providing dvpn map information. | ||
| hpnicfDvpnSessionGroup | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.4.2.7 | A collection of objects providing dvpn session information. | ||
| hpnicfDvpnSessionHisGroup | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.4.2.8 | A collection of objects providing dvpn session history information. | ||
| hpnicfDvpnNotificationGroup | 1.3.6.1.4.1.11.2.14.11.15.2.57.1.4.2.9 | A collection of objects providing dvpn notification information. |
RFC description
Dynamic Virtual Private Network (DVPN) management for routers supporting DES, 3DES, and AES encryption with various authentication algorithms.
Start monitoring HP/H3C Comware router (Dynamic VPN tunnels) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.