H3C-VOANALOGIF-MIB

All MIBs › H3C-VOANALOGIF-MIB

Organization: Huawei-3COM Technologies Co., Ltd.

Last Updated: 2005-03-15

Category: Domain: VoIP/Telephony, Vendor: H3C/HH3C

Description: H3C MIB for voice analog interface management configuring FXS/FXO ports on H3C voice gateway modules.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is H3C-VOANALOGIF-MIB?

H3C-VOANALOGIF-MIB is a Huawei-3COM Technologies proprietary MIB configuring analog voice interfaces (FXS/FXO) on H3C voice gateways. Its common-configuration table, keyed by port, records port type and sub-line, an FXS-configuration table records caller-ID display/send/type settings, an FXS-timer table records dial-interval/first-dial/ring-back timers, and an FXO-configuration table records area code, pre-dial delay, and port impedance. As a configuration MIB it lets an administrator confirm caller-ID and impedance-matching settings on an H3C analog voice port. It is deployed on H3C (3Com-Huawei) voice gateways. Engineers can download the H3C-VOANALOGIF-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in H3C-VOANALOGIF-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C (3Com-Huawei) voice gateways (analog FXS/FXO ports)

Monitoring Examples

An administrator checks h3cVoAIfFXSCfgCidDisplay to confirm caller-ID display settings on an H3C analog voice port.

What Can Be Monitored

analog voice port configuration

Imported Objects

From HUAWEI-3COM-OID-MIB

h3cVoice

OBJECT-IDENTITY

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
h3cVoiceAnalogInterface	1.3.6.1.4.1.2011.10.2.39.3			The MIB file is to provide the definition of the general analog voice interface configuration.
h3cVoAnalogIfCommonObjects	1.3.6.1.4.1.2011.10.2.39.3.1
h3cVoAnalogIfCommonCfgTable	1.3.6.1.4.1.2011.10.2.39.3.1.1		not-accessible	This table contains the information about configurable parameters for an voice analog interface.
h3cVoAnalogIfCommonCfgEntry	1.3.6.1.4.1.2011.10.2.39.3.1.1.1		not-accessible	The entry of h3cVoAnalogIfCommonCfgTable, which is automatically created when an analog voice module has been found.
I32 h3cVoAIfCfgPortIndex	1.3.6.1.4.1.2011.10.2.39.3.1.1.1.1	Integer32	not-accessible	The index of a voice analog interface common configuration table.
INT h3cVoAIfCfgPortType	1.3.6.1.4.1.2011.10.2.39.3.1.1.1.2	INTEGER	read-only	This object indicates the type of a voice analog interface.
OCT h3cVoAIfCfgPortSubLine	1.3.6.1.4.1.2011.10.2.39.3.1.1.1.3	OCTET STRING	read-only	This object indicates the port subscriber line name.
h3cVoAnalogIfFXSObjects	1.3.6.1.4.1.2011.10.2.39.3.2
h3cVoAnalogIfFXSCfgTable	1.3.6.1.4.1.2011.10.2.39.3.2.1		not-accessible	This table contains the information about configurable parameters for an analog fxs interface.
h3cVoAnalogIfFXSCfgEntry	1.3.6.1.4.1.2011.10.2.39.3.2.1.1		not-accessible	The entry of h3cVoAnalogIfFXSCfgTable, which is automatically created when an analog fxs voice module has been found.
I32 h3cVoAIfFXSCfgPortIndex	1.3.6.1.4.1.2011.10.2.39.3.2.1.1.1	Integer32	not-accessible	The index of voice analog interface fxs configuration table.
INT h3cVoAIfFXSCfgCidDisplay	1.3.6.1.4.1.2011.10.2.39.3.2.1.1.3	INTEGER	read-write	This object indicates whether displays the calling number of analog fxs interface or not.
INT h3cVoAIfFXSCfgCidSend	1.3.6.1.4.1.2011.10.2.39.3.2.1.1.4	INTEGER	read-write	This object indicates whether sends the calling number of analog fxs interface or not.
INT h3cVoAIfFXSCfgCidType	1.3.6.1.4.1.2011.10.2.39.3.2.1.1.5	INTEGER	read-write	This object indicates the type of cid message on an analog fxs interface.
OCT h3cVoAIfFXSCfgSubLine	1.3.6.1.4.1.2011.10.2.39.3.2.1.1.6	OCTET STRING	read-only	This object indicates the port subscriber line name.
h3cVoAnalogIfFXSTimerTable	1.3.6.1.4.1.2011.10.2.39.3.2.3		not-accessible	This table contains the timer information for an analog fxs interface.
h3cVoAnalogIfFXSTimerEntry	1.3.6.1.4.1.2011.10.2.39.3.2.3.1		not-accessible	The entry of h3cVoAnalogIfFXSTimerTable, which is automatically created when an analog fxs voice module has been found.
I32 h3cVoAIfFXSTimerPortIndex	1.3.6.1.4.1.2011.10.2.39.3.2.3.1.1	Integer32	not-accessible	The index of a voice analog interface fxs timer table.
I32 h3cVoAIfFXSTimerDialInterval	1.3.6.1.4.1.2011.10.2.39.3.2.3.1.4	Integer32	read-write	The interval, in seconds, between two dialing numbers.
I32 h3cVoAIfFXSTimerFirstDial	1.3.6.1.4.1.2011.10.2.39.3.2.3.1.5	Integer32	read-write	The period of time, in seconds, before dialing the first number.
I32 h3cVoAIfFXSTimerRingBack	1.3.6.1.4.1.2011.10.2.39.3.2.3.1.6	Integer32	read-write	This object indicates the maximum duration the ring back to persist. Unit is second.
OCT h3cVoAIfFXSTimerSubLine	1.3.6.1.4.1.2011.10.2.39.3.2.3.1.7	OCTET STRING	read-only	This object indicates the port subscriber line name.
h3cVoAnalogIfFXOObjects	1.3.6.1.4.1.2011.10.2.39.3.3
h3cVoAnalogIfFXOCfgTable	1.3.6.1.4.1.2011.10.2.39.3.3.1		not-accessible	This table contains the information about configurable parameters for analog fxo voice interface.
h3cVoAnalogIfFXOCfgEntry	1.3.6.1.4.1.2011.10.2.39.3.3.1.1		not-accessible	The entry of h3cVoAnalogIfFXOCfgTable, which is automatically created when an analog fxo interface has been found.
I32 h3cVoAIfFXOCfgPortIndex	1.3.6.1.4.1.2011.10.2.39.3.3.1.1.1	Integer32	not-accessible	The index of voice analog interface fxo configuration table.
INT h3cVoAIfFXOCfgArea	1.3.6.1.4.1.2011.10.2.39.3.3.1.1.4	INTEGER	read-write	This object indicates the area where this product is used.
I32 h3cVoAIfFXOPreDialDelay	1.3.6.1.4.1.2011.10.2.39.3.3.1.1.5	Integer32	read-write	The maximum length of time, in seconds, of pre-dial delay on the analog fxo interface.
INT h3cVoAIfFXOCfgPortImpedance	1.3.6.1.4.1.2011.10.2.39.3.3.1.1.6	INTEGER	read-write	This object indicates the port impedance of a FXO interface.
INT h3cVoAIfFXOCfgCidEnable	1.3.6.1.4.1.2011.10.2.39.3.3.1.1.7	INTEGER	read-write	This object indicates whether enables the cid receiving function on an analog fxo interface.
INT h3cVoAnalogIfFXOCfgCidSend	1.3.6.1.4.1.2011.10.2.39.3.3.1.1.8	INTEGER	read-write	This object indicates whether sends the calling number.
INT h3cVoAIfFXOCfgCidType	1.3.6.1.4.1.2011.10.2.39.3.3.1.1.9	INTEGER	read-write	This object indicates the type of cid message on an analog fxo interface.
OCT h3cVoAIfFXOCfgSubLine	1.3.6.1.4.1.2011.10.2.39.3.3.1.1.10	OCTET STRING	read-only	This object indicates the port subscriber line name.
h3cVoAnalogIfFXOTimerTable	1.3.6.1.4.1.2011.10.2.39.3.3.3		not-accessible	This table contains the timer information for an analog fxo interface.
h3cVoAnalogIfFXOTimerEntry	1.3.6.1.4.1.2011.10.2.39.3.3.3.1		not-accessible	The entry of h3cVoAnalogIfFXOTimerTable, which is automatically created when an analog fxo interface has been found.
I32 h3cVoAIfFXOTimerPortIndex	1.3.6.1.4.1.2011.10.2.39.3.3.3.1.1	Integer32	not-accessible	The index of voice analog interface fxo timer table.
I32 h3cVoAIfFXOTimerDtmf	1.3.6.1.4.1.2011.10.2.39.3.3.3.1.2	Integer32	read-write	This object indicates duration of DTMF(Dual Tone Multi-Frequency) signal in milliseconds.
I32 h3cVoAIfFXOTimerDtmfInterval	1.3.6.1.4.1.2011.10.2.39.3.3.3.1.3	Integer32	read-write	This object indicates DTMF(Dual Tone Multi-Frequency) sending interval in milliseconds.
I32 h3cVoAIfFXOTimerDialInterval	1.3.6.1.4.1.2011.10.2.39.3.3.3.1.4	Integer32	read-write	The interval, in seconds, between two dialing numbers.
I32 h3cVoAIfFXOTimerFirstDial	1.3.6.1.4.1.2011.10.2.39.3.3.3.1.5	Integer32	read-write	The period of time, in seconds, before dialing the first number.
I32 h3cVoAIfFXOTimerRingBack	1.3.6.1.4.1.2011.10.2.39.3.3.3.1.6	Integer32	read-write	This object indicates the maximum duration the ring back to persist. Unit is second.
OCT h3cVoAIfFXOTimerSubLine	1.3.6.1.4.1.2011.10.2.39.3.3.3.1.7	OCTET STRING	read-only	This object indicates the port subscriber line name.
h3cVoAnalogIfEMObjects	1.3.6.1.4.1.2011.10.2.39.3.4
h3cVoAnalogIfEMCfgTable	1.3.6.1.4.1.2011.10.2.39.3.4.1		not-accessible	This table contains the information about configurable parameters for an analog EM interface.
h3cVoAnalogIfEMCfgEntry	1.3.6.1.4.1.2011.10.2.39.3.4.1.1		not-accessible	The entry of h3cVoAnalogIfEMCfgTable, which is automatically created when an analog EM voice module has been found.
I32 h3cVoAIfEMCfgPortIndex	1.3.6.1.4.1.2011.10.2.39.3.4.1.1.1	Integer32	read-only	The index of voice analog interface EM configuration table.
INT h3cVoAIfEMCfgSignalMode	1.3.6.1.4.1.2011.10.2.39.3.4.1.1.2	INTEGER	read-write	This object indicates the signal modes of an analog EM interfaces.
INT h3cVoAIfEMCfgPhyParm	1.3.6.1.4.1.2011.10.2.39.3.4.1.1.3	INTEGER	read-write	This object indicates the operation of an analog EM signal.
INT h3cVoAIfEMCfgPhyType	1.3.6.1.4.1.2011.10.2.39.3.4.1.1.4	INTEGER	read-write	This object indicates the EM type of the analog interface.
I32 h3cVoAIfEMCfgTimeoutRing	1.3.6.1.4.1.2011.10.2.39.3.4.1.1.5	Integer32	read-write	The maximum seconds, to wait for the ring back on the EM interface.
I32 h3cVoAIfEMCfgTimeoutWaitDigit	1.3.6.1.4.1.2011.10.2.39.3.4.1.1.6	Integer32	read-write	The maximum length of time, in seconds, to wait for called number on an analog EM interface.
OCT h3cVoAIfEMCfgSubLine	1.3.6.1.4.1.2011.10.2.39.3.4.1.1.7	OCTET STRING	read-only	This object indicates the port subscriber line name.
h3cVoAnalogIfEMTimerTable	1.3.6.1.4.1.2011.10.2.39.3.4.3		not-accessible	This table contains the timer information for an analog EM interface.
h3cVoAnalogIfEMTimerEntry	1.3.6.1.4.1.2011.10.2.39.3.4.3.1		not-accessible	The entry of h3cVoAnalogIfEMTimerTable, which is automatically created when an analog EM voice module has been found.
I32 h3cVoAIfEMTimerPortIndex	1.3.6.1.4.1.2011.10.2.39.3.4.3.1.1	Integer32	read-only	The index of voice analog interface EM timer table.
I32 h3cVoAIfEMTimerDtmf	1.3.6.1.4.1.2011.10.2.39.3.4.3.1.2	Integer32	read-write	This object indicates DTMF(Dual Tone Multi-Frequency) sending duration in milliseconds.
I32 h3cVoAIfEMTimerDtmfInterval	1.3.6.1.4.1.2011.10.2.39.3.4.3.1.3	Integer32	read-write	This object indicates DTMF(Dual Tone Multi-Frequency) sending interval in milliseconds.
I32 h3cVoAIfEMTimerSendWink	1.3.6.1.4.1.2011.10.2.39.3.4.3.1.5	Integer32	read-write	This object indicates the maximum time in milliseconds between receiving seizure signal and sending wink signal. This object can only take effect when h3cVoAIfEMCfgSignalMode is set to 'winkStart'.
I32 h3cVoAIfEMTimerWinkRising	1.3.6.1.4.1.2011.10.2.39.3.4.3.1.6	Integer32	read-write	This object indicates the maximum time in milliseconds between sending seizure signal and receiving wink signal. This object can only take effect when h3cVoAIfEMCfgSignalMode is set to 'winkStart'.
I32 h3cVoAIfEMTimerWinkHold	1.3.6.1.4.1.2011.10.2.39.3.4.3.1.7	Integer32	read-write	This object indicates the maximum duration in milliseconds to send wink signal. This object can only take effect when h3cVoAIfEMCfgSignalMode is set to 'winkStart'.
I32 h3cVoAIfEMTimerDialoutDelay	1.3.6.1.4.1.2011.10.2.39.3.4.3.1.8	Integer32	read-write	This object indicates the maximum duration in milliseconds to send called digits. This object can only take effect when h3cVoAIfEMCfgSignalMode is set to 'immediateDial'.
I32 h3cVoAIfEMTimerDelayRising	1.3.6.1.4.1.2011.10.2.39.3.4.3.1.9	Integer32	read-write	This object indicates the maximum duration in milliseconds between receiveing seizure signal and sending delay signal. This object can only take effect when h3cVoAIfEMCfgSignalMode is set to 'delayDial'.
I32 h3cVoAIfEMTimerDelayHold	1.3.6.1.4.1.2011.10.2.39.3.4.3.1.10	Integer32	read-write	This object indicates the maximum duration in milliseconds to send delay signal. This object can only take effect when h3cVoAIfEMCfgSignalMode is set to 'delayDial'.
OCT h3cVoAIfEMTimerSubLine	1.3.6.1.4.1.2011.10.2.39.3.4.3.1.11	OCTET STRING	read-only	This object indicates the port subscriber line name.

RFC description

Configures analog voice interface parameters and port settings for VoIP systems.

Start monitoring H3C voice gateway (analog FXS/FXO interface config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download H3C-VOANALOGIF-MIB

What Is H3C-VOANALOGIF-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description