HPN-ICF-DVPN-MIB :: hpnicfDvpnTunnelClientRegType

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HPN-ICF-DVPN-MIB › hpnicfDvpnTunnelClientRegType

hpnicfDvpnTunnelClientRegType

Module: HPN-ICF-DVPN-MIB

OID (symbolic): HPN-ICF-DVPN-MIB::hpnicfDvpnTunnelClientRegType

OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.4.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The register type used by the client . Only the interface type is client, it can be used. undistributed: If a client send a packet to the client with this configuration, setver will only forward the packet whitout sending redirect packets.

forward: The client with this configuration will only send packets forwarded by server, which means it can not initiate to build a session with other clients. undistributedandforward: The client with this configuration have the characteristics of both 'forward' and 'undistributed'. normal: The client with this configuration can build session with other clients without any restriction.

What is hpnicfDvpnTunnelClientRegType?

Sets how a client-mode tunnel interface is allowed to register and build sessions: normal (no restriction), forward (only relay through the server, cannot build direct client-to-client sessions), undistributed (server forwards without sending redirects), or both restrictions combined. It defaults to normal and only applies when the interface type is client.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.4.1.3
snmpwalk -v2c -c public <target> HPN-ICF-DVPN-MIB::hpnicfDvpnTunnelClientRegType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.4.1.3.1
snmpget -v2c -c public <target> HPN-ICF-DVPN-MIB::hpnicfDvpnTunnelClientRegType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.4.1.3.1 i <value>

Start monitoring HP/H3C Comware router (Dynamic VPN tunnels) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-DVPN-MIB::hpnicfDvpnTunnelClientRegType OID value, configure state conditions and alerts, and monitor any HP/H3C Comware router (Dynamic VPN tunnels) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.11hpicfObjectsCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.15hpnicfHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2hpnicfCommonHPN-ICF-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.11.15.2.57hpnicfDvpnHPN-ICF-DVPN-MIB
1.3.6.1.4.1.11.2.14.11.15.2.57.1hpnicfDvpnMibObjectsHPN-ICF-DVPN-MIB
1.3.6.1.4.1.11.2.14.11.15.2.57.1.2hpnicfDvpnMibTableTroopHPN-ICF-DVPN-MIB
1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.4hpnicfDvpnTunnelTableHPN-ICF-DVPN-MIB
1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.4.1hpnicfDvpnTunnelEntryHPN-ICF-DVPN-MIB
1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.4.1.3hpnicfDvpnTunnelClientRegTypeHPN-ICF-DVPN-MIB